Advantech PCA-6186 manuale d’uso

PCA-6186 Full-size socket 478 Intel Pentium® 4/ Celeron™ processor-based PCI/ISA CPU card User ’ s Manual[...]

PCA-6186, ed. 1 User’s Manual ii Copyright Notice This document is copyrighted, 2002, by Advan tech Co., Ltd. All rights are reserved. Advantech Co ., Ltd. reserves the right to make improve- ments to the products descri bed in this manual at any time withou t notice. No part of this m anual may be repro duced, copied, transl ated or transmit- te[...]

iii A Message to the Customer Advantech customer services Each and every Advantech pro duct is built to the most exacting specifica- tions to ensure reliable performance in the harsh and demanding condition s typical of industrial environ ments. Whether your new Advantech equipment is destined for the laboratory or the factory floor , you can be as[...]

PCA-6186, ed. 1 User’s Manual iv PCA-6186 series comparisoin table Model PCA- 6186L V- 00A1 PCA- 6186VE- 00A1 PCA- 6186E2- 00A1 PCA- 6186VG- 00A1 PCA- 6186G2- 00A1 CPU: Single socket 478 Intel® Pentium® 4/ Celer on™ VV V V V Chipset 845GL 845G 845G 845G 845G Front Side Bus 400 MHz 400/533 MHz 400/533 MHz 400/533 MHz 400/533 MHz System chipset[...]

v Product warranty Advantech warrants to you, the original purchaser , that each of its prod- ucts will be free from defects in material s and workmanshi p for two years from the date of purchase. This warranty does not apply t o any products which have b een repaired or altered by persons other than repair perso nnel authorized by Advantech, or wh[...]

PCA-6186, ed. 1 User’s Manual vi Ini tia l Ins pec tion Before you begin installing your card, please make su re that the following materials have been shipped: • PCA-6186 Pentium ® 4/Celeron™ processor-b ased single board com- puter • 1 PCA-6186 Startup Manual • 1 CD with driver utility and manual (in PDF format) • 1 FDD cable, P/N: 1[...]

1 Contents Chapter 1 Hardware Co nfiguration ................................. 2 1.1 Introduction ............ ............................ ............ ........... ........ 2 1.2 Features .......... .............. .............. .............. .............. ........... 3 1.3 Specifications ......... .............. .............. .............. ..[...]

PCA-6186 User’s Manual 2 2.5 USB Ports (CN6, CN31, and CN32) ......................... ...... 18 2.6 VGA Connector (CN7) .................... .............. .............. ... 18 2.7 10/100Base-T Ethernet Connectors (CN8 and CN3 4) .... 19 2.8 Serial Ports (CN9: COM1; CN10: COM2) ..................... 19 2.9 PS/2 Keyboard and Mouse Connectors (CN[...]

3 3.4.12 Security Option ............. ........... ............. ........... ........... .. 32 3.4.13 APIC Mode ....... ............ ............. ........... ........... ........... .. 32 3.4.14 MPS Version Cont rol For OS ............... ........... ............. 32 3.5 Advanced Chipset Features ..... ...... .............. .............. ...... 3[...]

PCA-6186 User’s Manual 4 3.7.1 Power-Supply Type ..... ........... ...................... ......... ...... 38 3.7.2 ACPI func tion ........ ........... ........... .............. ........... ........ 38 3.7.3 Powe r Management ................... ........... ............. ........... 39 3.7.4 Vide o Off In Suspend .......... ............ ........[...]

5 and 82562/82551) ............ ............................................................ 55 6.5 Windows NT Drivers Setup Pro cedure (Intel 82540) ..... 61 6.6 Windows NT Wake-on-LAN Setup Procedure............... 64 Chapter 7 USB 2.0 Configuration ................................... 68 7.1 Introduction ......... ................................[...]

PCA-6186 User’s Manual 6 Table B-8:Keyboard and mous e con nector (CN11) .. 109 B.9 External Keyboard Connector (CN12)......................... . 109 Table B-9:External keyboard connector (CN12) ....... 109 B.10 IR Connector (CN13). ...................... .............. .............. . 110 Table B-10:IR connector (CN13) ........... ........... .[...]

1 CHAPTER 1 General Information This chapter gives b ackground infor- mation on the PCA-6186. It th en shows you how to configure the card to match your application an d prepare it for installation in to your PC. Sections include: • Introduction • Features • Specifications • Board Layout • Jumpers and Connectors • Safety Precautions •[...]

PCA-6186 User’s Manual 2 Chapter 1 Hardware Configuration 1.1 Introduction Advantech's PCA-6186 full-si ze CPU card is designed with Intel 845G chipset and supports sock et 478 Pentium 4/Celeron processor (FSB 400/ 533MHz) up to 2.4GHz and abov e. In addition to high-speed processor, PCA-6186 supports up to 2GB DDR memory wit h 2 DIMM socket[...]

3 1.2 Features 1. Fan status monitoring and alarm: T o prevent system overheating and damage, the CPU fan can be monitored for speed and failure. The fan is set for its normal RPM range and alarm thresholds. 2. T emperature monitoring and alert: T o prevent system overheat- ing and damage, the CPU card supports processor thermal sensing and auto-pr[...]

PCA-6186 User’s Manual 4 9. More: • Power On by Alarm: Powers up your computer at a certain time. • V irus warning: During and after system boot-up, any attempt to write to the boot sector or partition table of t he hard disk drive will halt t he sys- tem. In this case, a warning message will be displayed. Y ou can then run your anti-virus pr[...]

5 • Keyboard and PS/2 mouse connector: One 6-pin mini-DIN connector is located on the mounting bracket for easy connection to a keyboard or PS/2 mouse. An onboard keyboard pin header connector is also avail - able • USB port: Supports up to six USB 2.0 and transmission rate up to 480Mbps. (Six USB ports are available in PCA-6186E2-00A1 and PCA-[...]

PCA-6186 User’s Manual 6 1.4 Jumpers and Connectors Connectors on the PCA-6186 board link it to external devices such as hard disk drives and a keyboard. In addition, the board has a num ber of jumpers used to configure your system for your application. The tables below list the function of each of the board jumpers and con- nectors. Later sectio[...]

7 CN19 HDD LED connector CN20 A TX feature connector CN21 A TX soft power switch CN22 HW Monitor Alarm Close: Enable OBS Alarm Open: Disable OBS Alarm CN27 Extension I/O board connector CN28 Extension I/O board connector CN29 SM BUS Connector PIN1: SMB_DA T A PIN2: SMB_CLOCK CN31 USB 0,1 CN32 USB 2, 3 CN33 PS/2 Keyboard an d Mouse conn ector CN34 1[...]

PCA-6186 User’s Manual 8 1.5 Board Layout: Jumper and Connector Locations Figure 1.1: Jumper and connecter locations[...]

9 Figure 1.2: Extension I/O d aug hter board (for PCA-6186E2-00A1) Figure 1.3: Extension I/O daughter board (for PCA-6186G2-00A1)[...]

PCA-6186 User’s Manual 10 1.6 Safety Precautions 1.7 Jumper Setti ngs This section provides i nstructions on how to confi gure your card by set- ting the jumpers. It also includes the card's default settings and y our options for each jumper . 1.7.1 How to set jumpers Y ou configure your card to match th e needs of your application by sett i[...]

11 OFF) a jumper , you remove the clip. So metimes a jumper consists of a set of three pins, labeled 1, 2, and 3. In this case you connect either pins 1 and 2, or 2 and 3. A pair of needle-nose pliers may be useful when setting jumpers. 1.7.2 CMOS clear (J1) The PCA-6186 CPU card contains a jumper that can erase CMOS data and reset the system BIOS [...]

PCA-6186 User’s Manual 12 1.8 System Memory The top-left edge of t he PCA-6186 contains two sockets for 184 -pin dual in-line memory modules (DIMMs). Bo th two sockets use 3.3 V unbuf- fered synchronous DRAMs (DDR SDRAM). DIMMs are available in capacities of 64, 1 28, 256, 512 MB, or 1 GB. The sockets can be filled in any combination with DIMMs o[...]

13 1.8.1 Sample calculation: DIMM memory c apacity Suppose you install a 512 MB DIMM into your PCA-6186 's socket 1 and a 512 MB DIMM into sockets 2. Y our total system memory is 1 GB, cal- culated as follow s: T otal memory 1 GB 1.9 Memory Installation Procedures T o install DIMMs, first make sure the two handles of the DIMM socket are in the[...]

PCA-6186 User’s Manual 14 1.1 1 CPU Installation The PCA-6186 is designed for Intel Pen tium® 4 processor/Celeron™ (socket 478) Note: Slim Heatsink & Fan is available from Advan- tech. Part number is 1759252100. Please contact with Advantech's sales representitive if needed.[...]

15 Chapter 2 CHAPTER 2 Connecting Peripherals This chapter tells how to connect peripherals, sw itches, and indicators to the PCA-6186 board.[...]

PCA-6186 User’s Manual 16 Chapter 2 Connecting Peripherals 2.1 Introduction Y ou can access most of the connectors fr om the top of the board while it is installed in the chassis. If you have a number of cards installed or have a packed chasis, you may need to pa rtially remove the card to make all the connections. 2.2 Primary (CN1) and Secondary[...]

17 Chapter 2 2.3 Floppy Drive Connector (CN3) Y ou can attach up to two floppy disk dri ves to the PCA-6186's onboard controller . Y ou can use 3.5" (720 KB, 1.44 MB ) drives. The card comes with a 34-pin daisy- chain drive connector cable. On one end of the cable is a 34-pin flat-cable connector . On the other end are two sets of 34-pin [...]

PCA-6186 User’s Manual 18 2.5 USB Ports (C N6, CN31, and CN32) The PCA-6186 provides up to six ports of USB (Universal Serial Bus) interface, which gives complete Plug & Play and hot swapping for up to 127 external devices.The USB interf ace complies with USB Specification Rev . 2.0 support transmission rate up to 480 Mbps and is fu se-protec[...]

19 Chapter 2 2.7 10/100Base-T Ethernet Connectors (CN8 and CN34) The PCA-6186 is equ ipped with one or two high-perfo rmance 32-bit PCI-bus Ethernet interfaces, which are fully compliant with IEEE 802.3/u 10/100 Mbps CSMA/C D standards. Also, PCA-6 186 provides the o ption of supporting single or dual 10/10/1 000 Mbps Ethernet LANs. They are suppor[...]

PCA-6186 User’s Manual 20 2.9 PS/2 Keyboard and Mouse Connectors (CN1 1 and CN33) T wo 6-pin mini-DIN connectors (CN11 and CN33) on the card mounting bracket provide connection to a PS/2 keyboard and a PS/2 mouse, respec- tively . CN1 1 can also be connect ed to an adapter cable (P/N: 1700060202, available from Ad vantech) for connecting to bot h[...]

21 Chapter 2 2.1 1 Infrared (IR) Connector (CN13) This connector suppo rts the optional wireless infrared transmitting and receiving module. This mo dule mounts on the system case. Y ou must configure the setting through the BIO S setup (see Chapter 3). 2.12 CPU Fan Connector (CN14) If fan is used, this connector su pports cooling fans o f 500mA (6[...]

PCA-6186 User’s Manual 22 2.13 Front Panel Connectors (CN16, 17, 18, 19, 21&22) There are several external switches to monitor and control the PCA- 6186. 2.13.1 Power LED and Keyboard Loc k (CN16) CN16 is a 5-pin connector for the k eyboard lock and power on LED. Refer to Appen dix B for detailed info rmation on the pin assignments. If a PS/2[...]

23 Chapter 2 2.13.3 Reset (CN18) Many computer cases offer the convenie nce of a reset button. Connect the wire from the reset button 2.13.4 HDD LED (CN19) Y ou can connect an LED to connector CN19 to indicate when the HDD is active. 2.13.5 A TX soft power switch (CN21) If your computer case is equipped wi th an A TX po wer supply , you should conn[...]

PCA-6186 User’s Manual 24 2. Connect the 3-pi n plug of the cable to CN20 (A TX feature connec- tor). 3. Connect the power on/off button to CN21. (A momentary type of button sh ould be used.) 2.14.2 Controlling the soft power switch Users can also identify the cu rrent power mode t hrough the syst em's power LED. 2.15 SM Bus Connector (CN29)[...]

25 Chapter 2 2.16 Connecting to SNMP -1000 remote manager Use the 6-pi n to 8-pin cable t o connect the CPU card t o SNMP-1000. This cable comes wi th the SNMP-100 0. 2.17 AC-97 Audio Interface The PCA-6186 provides AC-97 audio through PCA -AUDIO-00A1 mod- ule from Advantech. 2.18 Auxiliary 4-pin power connector (CN46 and CN47) T o ensure the suffi[...]

PCA-6186 User’s Manual 26[...]

27 Chapter 3 CHAPTER 3 A ward BIOS Setup This chapter describes how to set the card’ s BIOS configuration data.[...]

PCA-6186 User’s Manual 28 Chapter 3 A ward BIOS Setup 3.1 Introduction A ward’ s BIOS RO M has a built-in setup program that allows users to modify the basic system configu ration. This type of inform ation is stored in battery-backed memory (CMOS RAM) so that it retains th e setup information when th e power is turned o ff. 3.2 Entering Setup [...]

29 Chapter 3 3.3 Standard CMOS Setup Choose the “Standard CMOS Features” option from the “Initial Setup Screen” menu, and the screen below will be displayed. This menu allows users to configure system components such as dat e, time, hard disk driv e, floppy drive, display , and memory . 3.3.1 CMOS RAM backup The CMOS RAM is powered by an on[...]

PCA-6186 User’s Manual 30 3.4 Advanced BIOS Features The “Advanced BIOS Features” scr een appears when choosing the “Advanced BIOS Features” item from th e “Initial Setup Screen” menu. It allows the user to configure the PC A-6186 according to his particular requirements. Below are some majo r items that are provided in the Advanced B[...]

31 Chapter 3 3.4.1 V irus W arning If enabled, a warning message and alarm beep activates if someone attempts to write here. The commands are “Enabled” or “Disabled.” 3.4.2 L1 & L2 Cache Enabling this feature speeds up memory access. The commands are “Enabled” or “Disabled.” 3.4.3 Quick Power On Self T est This option speeds up [...]

PCA-6186 User’s Manual 32 3.4.1 1 T ypematic Delay (msec) T ypematic delay is th e time interval between the appearance of two con- secutive characters, when holding dow n a key . The input values for this category are: 250, 50 0, 750, 1000 (msec). 3.4.12 Security Option This setting determ ines whether the system will boot up if the password is [...]

33 Chapter 3 3.5 Advanced Chipset Features By choosing the “Advanced Chipset Features” option from the “Initial Setup Screen” menu, the screen below will be displayed. Th is sample screen contains the manufacturer ’ s default values for the PCA-6186, as shown in Figure 3-4: 3.5.1 DRAM Timing Selectable This item allows you to control the [...]

PCA-6186 User’s Manual 34 3.5.4 DRAM RAS# to CAS# Delay In order to improve performance, certa in space in memory is reserved for ISA cards. This memory must be map ped into the memo ry space below 16MB. The Choice: 15M-16M, Disabled. 3.5.5 RAS# Precharge Time This controls the idle clocks after issuing a precharge command to DRAM. Leave this on [...]

35 Chapter 3 3.5.13 On-Chip Frame Buffer Size User can select frame buffer size. Option is 8 MB and 1MB. 3.5.14 Boot Display User can select VGA controller when system is power on. The choice: Auto, PCI, AGP . PCI (externa l VGA card). AGP (onboard VGA con- troller). 3.6 Integrated Peripherals 3.6.1 IDE Primary (Secondary) Master/Slave PIO/UDMA Mod[...]

PCA-6186 User’s Manual 36 3.6.3 USB Controller Select Enabled if your system contains a Universal Serial Bus (USB) con- troller and you have USB peripherals. The choices: Enabled, Disabled. 3.6.4 USB Keyboard/Mouse Support Select Enabled if user plan to use an USB keyboard. The choice: Enabled, Disable. 3.6.5 AC97 Audio Select Disable if you do n[...]

37 Chapter 3 3.6.13 UART Mode Select This item allows you to sele ct UA R T mode. The choices: IrDA, ASKIR, Normal. 3.6.14 RxD, TxD Active This item allows yo u to determine the active of RxD, TxD. The Choices: “Hi, Hi,” “Lo, Lo,” “Lo, Hi,” “Hi, Lo.” 3.6.15 IR T ransmission Delay This item allows you to enable /disable IR transmissi[...]

PCA-6186 User’s Manual 38 speed. “ECP” allows the parallel port to operate in bi-directional mo de and at a speed faster than the maximu m data transfer rate. “ECP + EPP” allows normal speed operation in a two-way mode. 3.6.19 EPP Mode Select This field allows you to select EPP port type 1.7 or 1.9. The choices: EPP1.7 , 1.9. 3.6.20 ECP M[...]

39 Chapter 3 3.7.3 Power Management This category allows you to select the type (or degree) of power saving and is directly related to the following mo des: 1. HDD Power Down 2. Suspend Mode There are four selections for Powe r Management, three of which have fixed mode setti ngs. 3.7.4 V ideo Off In Suspend When system is in susp end, video will t[...]

PCA-6186 User’s Manual 40 3.7.10 PowerOn By Modem When Enabled, an input signal on the serial Ring Indicator (RI) line (in other words, an incoming call on the modem) awakens the system from a soft off state. The choi ces: Enabled, Disabled. 3.7.1 1 PowerOn By Alarm When Enabled, your can set the date and time at which the R TC (real- time clock)[...]

41 Chapter 3 3.8 PnP/PCI Configurations 3.8.1 PnP OS Installed Select Y es if you are using a plug an d play capable oper ating system. Select No if you need the BIOS to configure non-b oot device 3.8.2 Reset Configuration Data Default is Disable. Select Enable to reset Extended Syst em Configura- tion Data (ESCD) if you have installed a new add-on[...]

PCA-6186 User’s Manual 42 3.9 PC Health Status 3.9.1 CPU W arning T emperature This item will prevent the CPU from overheatin g. The choices: 30~120. 3.9.2 Current CPU T emperature This shows you the current CPU temperature. 3.9.3 Current CPUF AN Speed This shows you the curren t CPUF AN operating speed. 3.9.4 +5V/+12V/-12V/-5V This shows you the[...]

43 Chapter 3 3.10 Password Setting T o change the password: 1. Choose the “Set Password” optio n from the “Initial Setup Screen” menu and press <Enter>. The screen will display the following message: Press <Enter>. 2. If the CMOS is good or if this option has been used to change the default passw ord, the user is asked for the p[...]

PCA-6186 User’s Manual 44 3.12 Exit Without Saving Selecting this option and pressing <Enter> lets you exit th e setup program without recording any new values or chan ging old ones.[...]

45 Chapter 4 CHAPTER 4 Chipset Software Installation Utility This utility software instal ls to the Win- dows INF files that outline to the oper- ating system how the components will be configured. This utility has to be installed before other dri vers.[...]

PCA-6186 User’s Manual 46 Chapter 4 Chipset Software Installation Utility 4.1 Before you begin T o facilitate the installation of th e enhanced display device drivers and utility software, you shoul d read the instructions in this chapter carefully before you attempt installatio n. The device drivers for the PCA-6186 board are located on the soft[...]

47 Chapter 4 • Identification of Intel ® chipset components in the Dev ice Manager . • Integrates superior video features. These include filtered sealing of 720 pixel DVD cont ent, and MPEG-2 motion co mpensation for soft- ware DVD W indows 98SE W indows 2000 W indows Me W indows XP 4.3 Installing the CSI Utility 1. Insert the driver CD into y[...]

PCA-6186 User’s Manual 48 2. Click "Next" when you see the following message. 3. Click "Y es" when you see the following message.[...]

49 Chapter 4 4. Click "Next" when you see the following message. 5. When the following message appear s, click "Finish" to complete the installation an d restart W indows.[...]

PCA-6186 User’s Manual 50[...]

47 Chapter 5 CHAPTER 5 AGP VGA Setup The PCA-6186 features an integrated AGP VGA interface. This chapter pro- vides instructions for installing the AGP VGA drivers from the driver CD included in your package.[...]

PCA-6186 User’s Manual 48 Chapter 5 AGP VGA Setup 5.1 Introduction As quoted from "Intel® 845G chi pset Graphics Chipset Controller Hub (GMCH) Rev . 1.0 May 2002.”: The Intel® 845G Graphics Memory Cont roller Hub (the 845G GMCH) is Intel’ s first memory controller hub with integrated graphics for the Intel Pentium® 4 processor . The 8[...]

49 Chapter 5 tion, which uses Direct AGP to request allocation of additional memory for 3D applications, and returns the memory to the operating system when no longer required. The Intel Extreme Graphics Driver determines the size of the pre-allo- cated memory needed and will make additional Non-Local V ideo Mem- ory requests to achieve the amount [...]

PCA-6186 User’s Manual 50 2. Y ou will see a welcome window . Please chick on "Next" to con- tinue the installation. 3. Click "Y es" when you see the following message.[...]

51 Chapter 5 4. Click on "Y es" to continue the instal lation 5. VGA driver is now install ing[...]

PCA-6186 User’s Manual 52 6. When the follo wing message appears, yo u can choose to restart the computer now or later.[...]

53 Chapter 6 CHAPTER 6 LAN Configuration The PCA-6186 supports dual 10/ 100Base-T (or dual 10/100/1 000Base- T) Ethernet networking with Intel 82562/82551 Eth ernet controller (or 82540 for Gigabit LAN). This chapter gives detailed information on Ethernet configuration. It shows you how to configure the card to match your appl i- cation requirement[...]

PCA-6186 User’s Manual 54 Chapter 6 LAN Configuration 6.1 Introduction The PCA-6186 features the 32-bit 10/100/1000 Mbps Ethernet network interface. This interface supports bus mastering archit ecture and auto- negotiation features. Therefore standard twisted-p air cabling with RJ-45 connectors for 10 Mbps, 100 Mbps and 1000 Mbps connections can [...]

55 Chapter 6 6.3 Installation The PCA-6186's onboard Ethernet inte rface supports all majo r network operating systems. However , the instal lation procedure varies with differ- ent operating systems. In the following sections, refer to the one that pro- vides driver setup procedure for the operating system you are using. 6.4 Windows 98/2000 D[...]

PCA-6186 User’s Manual 56 2. In the "PCI Ethernet Controller Properties" windo w , select the "Driver" tab. Then click on "Update Driver ..." 3. In the "Upgrade Device Driver Wizard" window , cli ck on "Next."[...]

57 Chapter 6 4. In the "Upgrade Devi ce Driver W izard" window , select "Display for a list of known drivers for this device so that I can choose a spe- cific driver ." Then click on "Next." 5. In the following "Upgrade Dev ice Driver W izard" window ,cl ick on Network Adapter and then "Next".[...]

PCA-6186 User’s Manual 58 6. In the "Upgrate Device Driver Wizer" W indow , click on "Have Disk" and then "Next". 7. In the following "Upgrade D evice Driver W i zard" window , specify the location at "D:Drv_Lan82 540" for 10/100/1000Base-T or D:Drv_Lan82562 for 10/ 100Base-T Ethernet LAN. D:[...]

59 Chapter 6 8. In the following "Update Devi ce Driver W i zard" window , choose "Intel 82540OEM Based Network Connection" and cl ick on "Next". If your board is with 10/100Base-T Ethernet controller onboard, please choose "Intel 8 255x Based Fast Et hernet V ersion.[...]

PCA-6186 User’s Manual 60 9. In the following "Update Devi ce Driver W i zard" window , click on "Next" 10. Intel 82540 LAN driver is comple ted installed. Click on "Finish" to complete the intallation .[...]

61 Chapter 6 6.5 Windows NT Drivers Se tup Procedure (Intel 82540) 1. From the desktop of W indows NT , click on "Start" and select "Set- tings." Then click on the "Control Panel" icon t o select "System." 2. In the "Network" window , select the "Adapters" tab. Then click on "Add...&q[...]

PCA-6186 User’s Manual 62 3. In the "Select Network Adapter" window , click on "Have Di sk..." 4. When the "Insert Disk" window appears, insert the driver CD into the CD-ROM drive and type in D :Drv_Lan82540. When you have the correct file path, cl ick on "OK."[...]

63 Chapter 6 5. In the "Select OEM Option" win dow , select Intel Pro 1000 Family Adapter and click on "OK" 6. In the "Network " window , select the "Adapt ers" tab. Under "Net- work Adapters," highlight "[1] Int el® PRO/1000MT Network Con- nection Mana gement Adapter " and "[2] Int [...]

PCA-6186 User’s Manual 64 6.6 Windows NT W ake-on- LAN Setup Procedure 1. From the desktop of W indows NT , click on "Start" and select "Set- tings." Then click on the "Control Panel" icon t o select "System." 2. In the "Intel(R) PROSet" wi ndow , u nder "Select a Network Adapter ," choo[...]

65 Chapter 6 3. In the "Reboot Required" window , cli ck on "Y es."[...]

PCA-6186 User’s Manual 66[...]

67 Chapter 7 CHAPTER 7 USB 2.0 Configuration The PCA-6186 supports USB 2.0 device. From this chapter, you will find detail inform aiton regarding Windows 2000 USB 2.0 dri ver setup procedure.[...]

PCA-6186 User’s Manual 68 Chapter 7 USB 2.0 Configuration 7.1 Introduction The PCA-6186 is designed with Intel ICH4 which supports both U SB1.1 and USB 2.0 high-speed transmission. It still remains the compatibility with today's USB device. High-speed USB 2.0 provid es data transfer up to 480Mb/s which is 40 times faster than USB 1.1. It is [...]

69 Chapter 7 1. 1. From W indows 2000, select Start and click on Setting. In the window of Setting, click on ico n System. 2. Choose the option "Hardware", and then click on "Device Man- ager"[...]

PCA-6186 User’s Manual 70 3. In Device Manager , choose "USB Controller" and then double click. 4. Choose the option "Driver" and then click on "Update Driver".[...]

71 Chapter 7 5. In Upgrade Device Driver W izar , click on "Next". 6. In Upgrade Device Wizard, choose "search for a suitable device for my driver" and then click on " Next".[...]

PCA-6186 User’s Manual 72 7. T ick "Specify a location" and clic k "Next" 8. In the following windows, please specify the location "D:Drv_USBw2k" and t hen click on "OK".[...]

73 Chapter 7 9. In the following w indow , please click on "Finish" to com plete USB driver installation.[...]

PCA-6186 User’s Manual 74[...]

75 Chapter 8 CHAPTER 8 Ultra A T A Storage Driver Setup This driver must be in stalled to use the Intel ® Ultra A T A controller to impro ve storage subs ystem perf ormance and overall system performance.[...]

PCA-6186 User’s Manual 76 Chapter 8 Ultra A T A Storage Driver Setup 8.1 Introduction This driver takes advantage of the latest Intel ® Ultra A T A cont roller fea- tures to improve both storage subsy stem performance and overall system performance. A useful diagnost ic tool, Intel Ultra A T A Compan ion® , shows technical information of the A [...]

77 Chapter 8 8.3 Window 2000 Setup Procedure 1RWH%HIRUHLQVWDOOLQJWKLVGULYHU PDNHVXUHWKH&6,XWLOLWKDV  EHHQLQVWDOOHGLQR XUVVWHP6HH&KDSW HUIRU LQIRUPDWLRQRQLQVWDOOLQJWKH&6,XWLOLW  1. Insert the driver CD into your system's CD-ROM drive. In a [...]

PCA-6186 User’s Manual 78 2. Click on "Next" when you see the follo wing message. 3. When you see the following message, click on "Y es" to accept the License Agreement.[...]

79 Chapter 8 4. Click on "Next" when you see the follo wing message. 5. When the following message appear s, click "Finish" to complete the installation an d restart W indows.[...]

PCA-6186 User’s Manual 80 8.4 Displaying Driver Information 1. From the desktop of W indows, click on "Start" and select "Pro- grams." Then select "Intel Ultra A T A Stor age Driver" and then "Companion." 2. Click on the "Device Parameters" or the "Storage Report" tab to view related inf[...]

81 Chapter 8 8.5 NT Setup Procedure 1. Insert the driver CD into your system's CD-ROM drive. In a few seconds, the software installation main menu appears, as shown in the following fi gure. Under the "IDE DRIV ERS" heading, click on the "Install" button.[...]

PCA-6186 User’s Manual 82 2. Click on "Next" when you see the follo wing message. 3. When you see the following message, click on "Y es" to accept the License Agreement.[...]

83 Chapter 8 4. When the following message appear s, click "Finish" to complete the installation an d restart W indows.[...]

PCA-6186 User’s Manual 84[...]

85 Chapter 9 CHAPTER 9 Onboard Security Setup This chapter explains OBS concepts and provides inst ructions for installin g the relevant software drivers. This is done using the driver CD included in your PCA-6186 package.[...]

PCA-6186 User’s Manual 86 Chapter 9 Onboard Security Setup 9.1 Introduction The PCA-6186's h ardware monitor is d esigned with Winbond W83782D. Onboard security (OBS) fun ctions monitor key hardware. They help yo u maintain your system's stabili ty and durability . The PCA-6186 can moni- tor 5 sets of system positive voltages, 2 sets of[...]

87 Chapter 9 9.2 Windows 9X Drivers Setup Procedure 1. Insert the driver CD into your system's CD-ROM drive. In a few seconds, the software installation main menu appears, as shown in the following figure. Click on the "WIN 9X" button under the "OBS DRIVERS" heading. 2. When you will see the following m essage, make sure yo[...]

PCA-6186 User’s Manual 88 3. Click on the square graphics but ton when you see the following message. 4. When you see the following messag e, click on "OK" to complete the installation.[...]

89 Chapter 9 9.3 Windows 2000/NT Driv ers Setup Procedure 1. Insert the driver CD into your system's CD-ROM drive. In a few seconds, the software installation main menu appears, as shown in the following figure. Click on the "WIN NT" button und er the "OBS DRIVERS" heading.[...]

PCA-6186 User’s Manual 90 2. Click "Next" when you see the following message. 3. Click "Next" when you see the following message.[...]

91 Chapter 9 4. Click "Next" when you see the following message. 5. Click "Finish" when you see the following message.[...]

PCA-6186 User’s Manual 92 6. Click "OK" to restart Windows. 9.4 Using the OBS Hardwa re Doctor Utility After completing the setup, all th e OBS functions are permanently enabled. When a monitored reading exceeds safe limits, a warning mes- sage will be displayed and an error b eep tone will activate to attract your attention. OBS Hardwa[...]

93 Chapter 9 1. From the desktop of W indows, click on "Start" and select "Pro- grams" and then "OBS Hardware Doctor ." 2. It is recommended that you load the defaul t values for all the OBS settings. However , if desired, you can establish new conditions for voltage, fan speed, and temperature. Fo r TRANS_VCC, low lim[...]

PCA-6186 User’s Manual 94[...]

93 Appendix A Appendix A Programming the W atchdog T imer The PCA-6186 is equipp ed with a watchdog timer that resets the CPU or generates an interrupt if processing comes to a standstill for any reason . This feature ensures sy stem reliability in industrial standalone or unman ned environments.[...]

PCA-6186 User’s Manual 94 Appendix A Programming the watchdog timer A.1 Programming the W atchdog Timer The PCA-6186's watchd og timer can be used to monitor system so ftware operation and take correc tive action if the software fails to functio n after the programmed period. This section descri bes the operation of the watchdog timer and ho[...]

95 Appendix A Unlock W83627H Select register of watchdog timer Enable the function of the watchdog timer Use the function of the watchdog time r Lock W83627HF[...]

PCA-6186 User’s Manual 96 W atchdog Timer Registers Address of regis ter (2E) Attribute Read/Write V alue (2F) and description 87 (hex) ----- Write this addres s to I/O address port 2E (hex) twice to unlock theW83627HF 07 (hex) write Write 08 (hex) to select reg- ister of watchdog timer . 30 (hex) write Write 01 (hex) to enable the function of th[...]

97 Appendix A T able A.1: W atchdog ti mer registers A.1.4 Example Program 1. Enable watchdog timer and set 10 sec. as timeout interval ;-------- --------- ----------- ---------- --------- ---------- -- Mov dx,2eh ; Unlock W83627HF Mov al,87h Out dx,al Out dx,al ;-------- --------- ----------- ---------- --------- ---------- -- Mov al,07h ; Select [...]

PCA-6186 User’s Manual 98 ;-------- --------- ----------- ---------- --------- ---------- -- Dec dx ; Set second as counting unit Mov al,0f5h Out dx,al Inc dx In al,dx And al,not 08h Out dx,al ;-------- --------- ----------- ---------- --------- ---------- -- Dec dx ; Set time out interval as 10 seconds and start counting Mov al,0f6h Out dx,al In[...]

99 Appendix A ;-------- --------- ----------- ---------- --------- ---------- -- Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;-------- --------- ----------- ---------- --------- ---------- -- Dec dx ; Set minute as counting unit Mov al,0f5h Out dx,al Inc dx In al,dx Or al,08h Out dx,al ;-------- -[...]

PCA-6186 User’s Manual 100 Out dx,al ;-------- --------- ----------- ---------- --------- ---------- -- Mov al,07h ; Select registers of watchdog timer Out dx,al Inc dx Mov al,08h Out dx,al ;-------- --------- ----------- ---------- --------- ---------- -- Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out d[...]

101 Appendix A Out dx,al ;-------- --------- ----------- ---------- --------- ---------- -- Mov al,07h ; Select registers of watchdog timer Out dx,al Inc dx Mov al,08h Out dx,al ;-------- --------- ----------- ---------- --------- ---------- -- Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out dx,al ;--------[...]

PCA-6186 User’s Manual 102 Out dx,al ;-------- --------- ----------- ---------- --------- ---------- -- Mov al,07h ; Select registers of watchdog timer Out dx,al Inc dx Mov al,08h Out dx,al ;-------- --------- ----------- ---------- --------- ---------- -- Dec dx ; Enable the function of watchdog timer Mov al,30h Out dx,al Inc dx Mov al,01h Out d[...]

103 Chapter B Appendix B I/O Pin Assignments This appendix contains informatio n of a detailed or specialized nature. It includes: • IDE Hard Drive Connector • Floppy Drive Connector • Parallel Port Connector • USB Connector • VGA Connect or • Ethernet 10/10 0/1000Base-T RJ-45 Connector • Keyboard and Mouse Connector • External Keyb[...]

ACP-1120 User’s Manual 104 Appendix B Pin Assignments B.1 IDE Hard Drive Connector (CN1, CN2) T able B.1: IDE hard drive connector (CN1, CN2) Pin Signal Pin Si gnal 1 IDE RESET* 2 GND 3D A T A 7 4 D A T A 8 5D A T A 6 6 D A T A 9 7D A T A 5 8 D A T A 1 0 9 DA T A 4 10 DA T A 1 1 11 D ATA 3 1 2 D ATA 1 2 13 DA T A 2 14 DA T A 13 15 DA T A 1 16 DA [...]

105 Chapter B B.2 Floppy Drive Connector (CN3) T able B.2: F loppy drive connector (CN3) Pin Signal Pin S ignal 1 GND 2 FDHDIN* 3G N D 4 N / C 5 N/C 6 FDEDIN* 7 GND 8 INDEX* 9 GND 10 MOTOR 0* 1 1 GND 12 DRIVE SELECT 1* 13 GND 14 DRIVE SELECT 0* 15 GND 16 MOTO R 1* 17 GND 18 DIRECTI ON* 19 GND 20 STEP* 21 GND 22 WRITE DA T A* 23 GND2 4 WRITE GA TE* [...]

ACP-1120 User’s Manual 106 B.3 Parallel Port Connector (CN4) T able B .3: Parallel p ort connecto r (CN4) Pin Signal Pin Si gnal 1 STROBE* 14 AUTOFD* 2D 0 1 5 E R R 3D 1 1 6 I N I T * 4D 2 1 7 S L C T I N I * 5D 3 1 8 G N D 6D 4 1 9 G N D 7D 5 2 0 G N D 8D 6 2 1 G N D 9D 7 2 2 G N D 10 ACK* 23 GND 11 B U S Y 2 4 G N D 12 PE 25 GND 13 SLCT 26 N/C [...]

107 Chapter B B.4 USB Connector (CN6) T able B.4: USB1/USB2 connector (CN6) Pin USB1 Signal Pin USB2 Signal 1+ 5 V 6 + 5 V 2 UV- 7 UV- 3 UV+ 8 UV+ 4 GND 9 GND 5 Chassis GND 10 N/C B.5 VGA Connector (CN7) T able B.5: T a ble B-6: VGA connector (CN7) Pin Signal Pin Signal 1R E D 9 V C C 2 GREEN 10 GND 3B L U E 1 1 N / C 4N / C 1 2 S D T 5 GND 13 H-SY[...]

ACP-1120 User’s Manual 108 B.6 Ethernet 10/100Base- T RJ-45 Connector (CN8, CN34) T able B.6: Ethernet 10/100Base-T RJ-45 co nnector (CN8, CN34) Pin Signal Pin Signal 1X M T + 5 N / C 2 XMT- 6 RCV- 3 RCV+ 7 N/C 4 N/C 8 N/C B.7 COM1/COM2 RS-232 Se rial Port (CN9, CN10) T able B.7: COM1/COM2 RS-232 serial port (CN9 , CN10) Pin Signal 1D C D 2R X D [...]

109 Chapter B B.8 Keyboard and Mouse Conn nector (CN1 1) T able B.8: Keyboard a nd mouse conn ector (CN1 1) Pin Signal 1 KB DA T A 2M S D A T A 3G N D 4V C C 5 KB CLOCK 6 MS CLOCK B.9 External Keyboard Connector (CN12) T able B.9: External keyboard connector (CN12) Pin Signal 1C L K 2D A T A 3N C 4G N D 5V C C 5 3 1 2 4 6[...]

ACP-1120 User’s Manual 110 B.10 IR Conn ector (CN13). T able B.10: IR connector (CN 13) Pin Signal Pin Signal 1+ 5 V 2 N / C 3 IR_RX 4 GND 5I R _ T X B.1 1 CPU Fan Powe r Connector (CN14) T able B.1 1: CPU fan power connector (CN14) Pin Signal 1G N D 2+ 1 2 V 3 Detect 1[...]

111 Chapter B B.12 Power LED and Keyboard Lock (CN16) Y ou can use an LED to indicate when the CPU card is on. Pi n 1 of CN16 supplies the LED's power , and Pin 3 is the ground. T able B.1 2: Power LED and keylo ck connecto r (CN16) Pin Function 1 LED power (+5 V) 2N C 3G N D 4 Keyboard Lock 5G N D B.13 External Speaker Connector (CN17) The CP[...]

ACP-1120 User’s Manual 112 B.14 Reset C onnector (CN18) T able B.14: Reset conn ector (CN18) Pin Signal 1 RESET 2G N D B.15 HDD LED Connector (CN19) T able B.15: HDD LED connector (CN19) Pin Signal 1 Vcc(LED+) 2 LED0 (LED-) 1 1[...]

113 Chapter B B.16 A TX Feature Connector (CN20) T able B.16: A TX feature connec tor (CN20) Pin Signal 1 PS-ON 2V C C 3V C C S B B.17 A TX Soft Po wer Switch (CN21)) T able B.17: A TX soft power switch (CN 21) Pin Signal 1 5VSB 2P W R - B T N B.18 H/W Monitor Alarm (CN22) T able B.18: H/W monitor alarm (CN22) Pin Signal 1 Enable OBS alarm 2 Disabl[...]

ACP-1120 User’s Manual 114 B.19 Extension I/O Board Connector (CN27) T able B.19: Extension I/O b oard connector (CN27) Pin Signal Pin Signal 1 D+ (USB3) 1 1 D- (USB1) 2 D+ (USB2) 12 D- (USB0) 3 D- (USB3) 13 Vcc (USB1) 4 D- (USB2) 14 Vcc (USB0) 5 Vcc (USB3) 15 GND (USB1) 6 Vcc (USB2) 16 GND (USB0) 7 GND (USB3) 17 5VSB 8 GND (USB2) 18 ACT LED (LAN[...]

115 Chapter B B.21 SM Bus Connector (CN29) B.23 PS/2 Mouse Connector (CN33) T able B.21: PS/2 mouse connector (CN33) Pin Signal 1M S D A T A 2N / C 3G N D 4V C C 5M S C L O C K 6N / C B.22 SM Bus Connector (CN 29) Pin Signal 1S M B _ D A T A 2S M B _ C L K 1 5 3 1 2 4 6[...]

ACP-1120 User’s Manual 116 B.24 AC-97 Audio Interface (CN43) T able B.22: Syste m I/O ports 1 VCC 2 GND 3 SYNC 4 BITCLK 5 SDOUT 6 SDIN 7 SDIN2 8 -ACRST 9 +12V 10 GND B.25 System I/O Ports T able B.23: Syste m I/O ports Addr . range (Hex)Device 000-01F DMA controller 020-021 Interrupt controller 1, master 022-023 Chipset address 040-05F 8254 timer[...]

117 Chapter B 378-37F Parallel printer port 1 (LPT2) 380-38F SDLC, bisynchronous 2 3A0-3AF Bisyn chronous 1 3B0-3BF Monochrome display an d printer adapter (LPT1) 3C0-3CF Reserved 3D0-3DF Color/graphics monitor adapter 3F0-3F7 Diskette contro ller 3F8-3FF Serial por t 1 B.26 DMA Channel Assignments T able B.24: DMA channel assignments Channel Funct[...]

ACP-1120 User’s Manual 118 12 IRQ3 Serial communicati on port 2 13 IRQ4 Serial communicati on port 1 14 IRQ5 Parallel port 2 15 IRQ6 Diskette controller (FDC) 16 IRQ7 Parallel port 1 (print port) B.28 1st MB Memory Map T able B.26: 1st MB memory ma p Addr . ra nge (Hex) Device F0000h - FFFFFh System ROM C8000h - EFFFFh Unused C0000h - C7FFFh VGA [...]