Advantech PCM-9588 manuale d’uso

User Manual PCM-9588 Intel® Celeron® M EBX SBC with DVI/ TTL/ VGA/ L VDS/ LAN/ 6 COM/ 2 SA T A / 6 USB2.0/ 16bit GPIO[...]

PCM-9588 User Man ual ii Copyright This document is copyrighted, ©2009. All righ ts ar e reserved. The original manufac- turer reserves the right to make improvements to the product s described in this man- ual at any time without notice. No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means withou[...]

iii PCM-9588 User Manual Product W arranty (2 years) W arranty Period ADV ANTECH a ims to meet the customer's expect ations for post-sales service a nd support; therefore, in addition to offering 2 years global warranty for ADV ANTECH's standard prod ucts, a global ext ended warranty service is also provided for customers upon request. AD[...]

PCM-9588 User Man ual iv Declaration of Conformity FCC Class A This device complies with the requirement s in p art 15 of the FCC rules: Operation is subject to the following two conditions: 1.This device may not cause harmful interference, and 2. This device must accept any interference receive d, including interference that may cause undesired op[...]

v PCM-9588 User Manual Packing List Before installation, please ensure the following items have been shipped : ! 1 PCM-9588 SBC ! 1 S tartup manual ! 1 Utility CD ! 1 mini jumper pack 9689000002 Ordering information Model Number Description PCM-9588T -M0A1E Intel C-M 600M w/TTL/CR T/6 COM/Audio/2SA T A/16 GPIO PCM-9588F-S0A1E Intel C-M 1.0G w/L VDS[...]

PCM-9588 User Man ual vi[...]

vii PCM-9588 User Manual Content s Chapter 1 General Introduction ................ ...........1 1.1 Introduction .............. ............. ................ ................ ............. ................ ....... 2 1.2 Product Specifications .............. ............. ................ ................ ............. ....... 2 1.3 Chipset ..... .[...]

PCM-9588 User Man ual viii Chapter 4 S/W Introduction & Installation ........ 37 4.1 S/W Introduction ............................ ............. ................ ................ ............ 38 4.2 Driver Installation . ................ ............. ................ ................. ................ ..... 38 4.2.1 Windows XP Professional....[...]

ix PCM- 9588 User Manual Table A.20:CN26: CF TYPEII conne ctor ......................... ........... 67 A.21 CN27: -V5 and -V12 connector .......... ................ ................ ................... .. 68 Table A.21:CN27: -V5 and -V12 connector ........... ................ ..... 68 A.22 CN28: USB3/4 Connec tor ........ ................ ........[...]

PCM-9588 User Manual x[...]

Chapter 1 1 General Introduction This chapter gives background information on PCM-9588. Sections include: ! Introduction ! Specifications[...]

PCM-9588 User Manual 2 1.1 Introduction ! Fanless design, Intel® Celeron® M Processor on b oard type ! EBX form factor standard, support s PC/104-Plus ! One SODIMM up to 2GB DDR2 400 MHz (910GMLE) ! Display Combination: CR T+ L VDS / DVI+ L VDS/ DVI+ CRT/ CR T+ TTL/ DVI+TTL ! 10/100 Mbps Ethernet support UL60601 Design, GIGA L AN optional ! Suppo[...]

3 PCM-9588 User Manual Chapter 1 General Introduction Display VGA port 18/36-bit TTL DVI (36 bit) L VDS (48 bit) Features Intel GMA 900,(166 MHz/160 MHz @1.05v) 2D Display core frequency su pport from 133 MHz & 190/200 MHz @ Vcc = 1.05 / 1.5 V depending on Host/Memory configura tion 3D Render core fre quency support from 133 MHz & 160/166 M[...]

PCM-9588 User Manual 4 1.3.1.3 Chip set (ICH6M) I/O: 1.3.1.4 Other (chip set) LPT 1 RS-232 4 RS-232/422/485 2 (Default RS-422/48 5, RS-232 by optiona l request) K/B 1 Mouse 1 USB 6 x USB2.0 Audio AC97, Line-in, Line -out, Mic-in, speaker out (R/L) GPIO 16-bit general purp ose input/out put IRDA 1 15 kbps (optional b y request) shared fr om COM2 Sou[...]

5 PCM-9588 User Manual Chapter 1 General Introduction 1.3.2 Mechanical Specifications 1.3.2.1 Dimensions (mm) 203mm(L)*146mm(W) (8" x 5.75") 1.3.2.2 Height on T op (mm) 15.4 mm (PCI slot) 1.3.2.3 Height on Bottom (mm) 8.5mm (CF socket) 1.3.2.4 Heat sink Dimensions (mm) 50*50*10 mm (Heatsink) 1.3.2.5 Weight (g) with Cooler 480 g 1.3.3 Elec[...]

PCM-9588 User Manual 6 1.3.3.2 Power supply Current PCM-9588 A T Power Consumption T est Condition: OS - WindowsXP SP2 Add-in Card - None CF Card - T ranscent 1G MiniPCI Card - None HDD - 160GB SA T A *1 BIOS - 9588x049 KeyBoard/Mouse - USB or PS/2 Interface Display - CRT PCM-9588 A TX Power Consumption T est Condition: OS - WindowsXP SP2 Add-in Ca[...]

7 PCM-9588 User Manual Chapter 1 General Introduction 1.3.3.3 RTC Batte ry T ypical V oltage: 3.0V Normal discharge cap acity: 196mAh 1.3.4 Environment S pecifications 1.3.4.1 Operating temperature 0 ~ 60° C (32 ~ 140° F) 1.3.4.2 Operating Humidity 0% ~ 90% Relative Humid ity , non-condensing 1.3.4.3 S torage temperature S tandard product s (0 ~ [...]

PCM-9588 User Manual 8[...]

Chapter 2 2 H/W Installation This chapter explains the setup procedures of the PCM-9588 hard- ware, including instructions on setting jumpers and connecting peripherals, switches, indicators and mechanical drawings.[...]

PCM-9588 User Manual 10 2.1 Jumpers 2.1.1 Jumper list JP1 VIO Select for PCI and ISA Slot JP4 CMOS Clear JP6 RS422/RS485 Select fo r COM5 and COM6 JP8 LCD Panel Powe r Select JP9 Backlight Control S elect 2.1.2 Jumper Settings: T able 2.1: JP1: VIO Sel ect for PCI and ISA slot Part Number 1653003100 Footprint PH_3x1V_2.54mm Description PIN HEADER 3[...]

11 PCM-9588 User Manual Chapter 2 H/W Installation 2.1.3 Jumper description Cards can be configured by setting ju mpers. A jumper is a metal bridge used to close an electric circuit. It consists of two met a l pins and a small metal clip (of ten protected by a plastic cover) that slid es over the pins to connect them. T o close a jumper , you conne[...]

PCM-9588 User Manual 12 2.2 Connectors 2.2.1 Connector list 2.2.2 Connector Settings 2.2.2.1 Audio CD-In Connector (CN2) CD In cable used to send audio CD sound to the computer's aud io chipset via CN2. PCs today use a standard four-pin cable; however , earlier cards and drives used con- nectors with three to six pins. 2.2.2.2 Audio Connector [...]

13 PCM-9588 User Manual Chapter 2 H/W Installation Codec '97) is Intel Corporation's Audi o "Codec" st andard developed by the Intel Architecture Labs in 1997 and used mainly in motherboards, modems, and sound cards. 2.2.2.3 Power connector (CN5) PCM-9588 can support both A TX and A T power supply and it can use different power [...]

PCM-9588 User Manual 14 2.2.2.1 1 IDE Connector (CN16) The board provides 1 IDE channel, and is designed for one Enhanced Inte grated Device Electronics hard disk drive or CDROM to the board's internal controller and one CF card. The IDE controller uses a PCI interface. This advanced IDE controller support s fast er dat a transfer , PIO mode 4[...]

15 PCM-9588 User Manual Chapter 2 H/W Installation 2.2.2.20 -V5 and -V12 connector (CN27) CN27 is a wafer type 3-pin connector for -V5 and -V12. 2.2.2.21 DDR2 SODIMM Socket (CN29) A SO-DIMM, or small outline dual in-line memory module, is a typ e of computer memory built using integrated circuit s.PCM-9588 has 1 x 200 pin SO-DIMM and can support me[...]

PCM-9588 User Manual 16 2.3 Mechanical 2.3.1 Jumper and Connector Locations Figure 2.1 Jumper and Connector La yout (Component Side) Figure 2.2 Jumper and Connector Layout (Solder Side)[...]

17 PCM-9588 User Manual Chapter 2 H/W Installation 2.3.2 Board Dimensions Figure 2.3 Board Dimension Layout (Component Si de) Figure 2.4 Board Dimension Layout (Solder Side) 0.00 [0.000] 0.00 [0.000] 0.98 [0.038] 14.80 [0.583] 41.98 [1.653] 55.80 [2.197] 5.08 [0.200] 5.08 [0.200] 135.89 [5.350] 0.00 [0.000] 36.20 [1.425] 138.44 [5.450] 140.97 [5.55[...]

PCM-9588 User Manual 18[...]

Chapter 3 3 BIOS Operation[...]

PCM-9588 User Manual 20 3.1 BIOS Introduction Advantech provides the full-featured AwardBIOS 6.0 which delivers superior perfor- mance, compatibility and functio nality that manufactures of Industrial PC and Embed- ded boards demand; it's many options and extensions let you customize your products to a wide range of applications and t arget ma[...]

21 PCM-9588 User Manual Chapter 3 BIOS Operation 3.2.1 Main Menu Press <Del> to enter A wardBIOS CMOS Se tup Utility , the Main Menu will appear on the screen. Use arrow keys to select am ong the items and press <Enter> to accept or enter the sub-menu. ! St andard CMOS Features This setup p age includes all the items in standard comp at[...]

PCM-9588 User Manual 22 3.2.2 S t andard CMOS Features ! Date The date format is <weekday>, <month>, <day>, <year>. ! Tim e The times format in <hour> <minute> < second>, base on the 24-hour time . ! IDE Channel 0 Master/Slave IDE HDD Auto-Detection Press "Enter" for automat ic device detection. ![...]

23 PCM-9588 User Manual Chapter 3 BIOS Operation ! Extended Memory The POST of the BIOS will determine th e amount of extended memory (above 1MB in CPU's memory address map) inst alled in the system. ! To t a l M e m o r y This item displays the tot al system memory size. 3.2.3 Advanced BIOS Features ! CPU Feature This item allows user to adju[...]

PCM-9588 User Manual 24 ! First / Second / Third / Other Boot Drive ! Boot Up Floppy Se ek [Disabled] When enabled, the BIOS will seek the floppy “A” drive on e time. ! Boot Up NumLock S tatus [Disabled] This item enables users to activate the Number Lock function upon system boot. ! Boot Up NumLock S tatus[Enabl ed] This item enables users to [...]

25 PCM-9588 User Manual Chapter 3 BIOS Operation 3.2.4 Advanced Chip set Features ! DRAM Timing Selec t able [By SPD] This item enables users to set the optim al timings for items 2 through 5, syste m default setting of "By SPD" to follow the SPD information and ensur e the system running in st able and optimal performance. ! CAS Latency [...]

PCM-9588 User Manual 26 This item allows the video BIOS to be cached to allow faste r execution and bet- ter performance. ! Memory Hole At 15M-16M [Disabled] This item reserves 15MB-16MB memory address sp ace to ISA expansion cards that specifically require the setting. Memory from 15MB-16MB will be unavail- able to the system because of the expans[...]

27 PCM-9588 User Manual Chapter 3 BIOS Operation ! OnChip IDE Device This item enables users to set the OnChip IDE device st atus, includes enable IDE devices and setting PIO and DMA access mode, and some of new chipset also support for SA T A device (Serial-A T A) ! Onboard Device This item enables users to set the Onboard device statu s, includes[...]

PCM-9588 User Manual 28 ! Serial 5 IRQ [IRQ10] This item allows user to adjust serial port 5 IRQ. ! Serial port 6 [2F 0] This item allows user to adjust serial port 6 ad dress. ! Serial 6 IRQ [IRQ1 1] This item allows user to adjust serial port 6 IRQ. ! Onboard Parallel Port [378/IRQ7] This item allows user to adjust p arallel port address and ir q[...]

29 PCM-9588 User Manual Chapter 3 BIOS Operation ! Run VGA BIOS if S3 Resume [Auto] This item allows system to reinitialize VGA BIOS aft er system resumes from ACPI S3 mode. ! Power Management [Min Sav ing] This item allows user to select system power savin g mode. ! HDD Power Down [Disabled] This item allows user to determine the time of system in[...]

PCM-9588 User Manual 30 This item allows user to enable and key in Date/time t o power on system 3.2.7 PnP/PCI Configurations ! Init Display First [PCI Slot] This item is setting for start up V ideo output from PCI or Onboard device. ! Reset Configuration Dat a [Disabled] This item allow user to clear any PnP configu ration data sto red in the BIOS[...]

31 PCM-9588 User Manual Chapter 3 BIOS Operation 3.2.8 PC Health S t atus ! Shut down T emperature [Disabled] This item enables users to set the limit ation of CPU temperature, the ran ge is from 85° C a nd 100° C. ! Current System/CPU T emp [Show Only] This item displays current system and CPU temperature. ! 2.5 V / 3.3 V / 5 V / 12 V [Show Only[...]

PCM-9588 User Manual 32 3.2.9 Frequency/volt age Control ! Spre ad Spectrum [Di sabled] This item enables users to set the spre ad spectrum modulation, if desire d. 3.2.10 Load Optimized Defaults Note! This "Frequency/Voltage Control" option cont rols the CPU Host and PCI frequency, this page depends on the CPU an d chipset installed; som[...]

33 PCM-9588 User Manual Chapter 3 BIOS Operation 3.2.1 1 Set Password T o Est ablish Password 1. Choose the Set Password option from th e CMOS Setup Utility main menu and press <Enter>. 2. When you see “Enter Password”, e nter the desired password and press <Enter>. 3. At the “Confirm Password” prompt, retype the de sired passwo[...]

PCM-9588 User Manual 34 T o Change Password 1. Choose the Set Password option from the CMOS Setup Utility main menu and press <Enter>. 2. When you see “Enter Password”, enter the e xisting password and press <Enter>. 3. Y ou will see “Confirm Password”. T ype it again, and press <Enter>. 4. Select Set Password again, and a[...]

35 PCM-9588 User Manual Chapter 3 BIOS Operation 3.2.13 Quit Without Saving Note! Typing "Y" will quit the BIOS Setup Utility without saving to CMOS. Typing "N" will return to BIOS Setup Utility.[...]

PCM-9588 User Manual 36[...]

Chapter 4 4 S/W Introduction & Installation Sections include: ! S/W Introduction ! Driver Installation ! SUSI Application Library[...]

PCM-9588 User Manual 38 4.1 S/W Introduction The mission of Advantech Embedded Sof tware Services is to "Enhance quality of life with Advantech plat forms and Microsof t Windows® embedded technology ." We enable Windows® Embedded software products on Advantech plat forms to more effect ively support the embedd ed computing community . C[...]

39 PCM-9588 User Manual Chapter 4 S/W Introduction & Installation 4.3 SUSI Application Library 4.3.1 SUSI Introduction T o make hardware easier and convenient fo r programmers to access, Advan tech has released a suite of API (Applica tion Programming Interface) in the form of a program library . The program library is called Secured and Unifie[...]

PCM-9588 User Manual 40 4.3.2.4 The VGA Control API There are two kinds o f VGA control APIs, backlight on/of f control and brightne ss con- trol. Backlight on/of f control allows a de veloper to turn on or of f the backlight, and to control brightness smoothly . 4.3.2.5 The W atchdog API A watchdog timer (abbreviated as WDT) is a hardware device w[...]

41 PCM-9588 User Manual Chapter 4 S/W Introduction & Installation *Note: 1. Extract Susi.zip . 2. Double-click the " Setup.exe " file. The installer searche s for a previous installat ion of the SUSI Library . If it locates one, a dialog box opens asking whether you want to modify , repair or remove the soft- ware. If a previous versi[...]

PCM-9588 User Manual 42 4.3.4 SUSI Sample Programs 4.3.4.1 Sample Programs The sample programs demonstrate how to incorporate SUSI into your program. There are sample programs for two categorie s of operating system, i.e. Windows XP and Windows CE. The sample pro grams run in graphics mode in Windows XP and Windows CE. The sample programs are descr[...]

43 PCM-9588 User Manual Chapter 4 S/W Introduction & Installation 4.3.4.4 GPIO When the application is executed, it wi ll display GPIO information in the GPIO INFORMA TION group box. It displays the number of input pins a nd output pins . Y ou can click the radio button to choose to test either the single pin function or multiple pin functions.[...]

PCM-9588 User Manual 44 ! T est Write Multiple Output Pins – Click the radio button- Multiple-Pins . – Key in the pin number from ‘0x01’ to ‘0x0 F’ to choose the multip le pin num- bers to write the value of the out put pin. The pin numbers are ordere d bit- wise, i.e. bit 0 stands for GPIO 0 , bit 1 stands for GPIO 1, etc. For example,[...]

45 PCM-9588 User Manual Chapter 4 S/W Introduction & Installation 4.3.4.6 SMBus When the application has executed, you can click the radio button to choose to test each access mode, i.e. Access a byte, Access multiple bytes and Access a word . All data must be re ad or written in hexadecimal except the numbers for radio butto n: Access multiple[...]

PCM-9588 User Manual 46 ! Write a word – Click the radio button- Access a word . – Key in the slave device address in the Slave address field. – Key in the register of fset in the Register Offset field. – Key in the desired dat a, such as 0x1234, in the Result field to write to the device. – Click the WRITE SM Bus DA T A button and the da[...]

47 PCM-9588 User Manual Chapter 4 S/W Introduction & Installation 4.3.4.7 VGA Control When the application is executed, it will di splay two blocks of VGA control functions. The application can turn on or turn of f the screen shot freely , and it also can tune the brightness of the p anels if your plat form is being sup ported. Y ou can test th[...]

PCM-9588 User Manual 48 4.3.4.8 W atchdog When the application is executed, it will display watchdog information in the WA T C H- DOG INFORMA TION group box. It displays max timeout, min timeout, and timeout steps in milliseconds. For example, a 1~255 seconds watch dog will has 255000 max timeout, 1000 min timeou t, and 1000 timeout step s. Y ou ca[...]

49 PCM-9588 User Manual Chapter 4 S/W Introduction & Installation 4.3.4.9 Hardware Monitor When the Monitor application is executed by clicking the button, hardware monitoring data values will be displayed. If cert ain da ta values are not supported by the platform, the correspondent data field will b e grayed-out with a value of 0.[...]

PCM-9588 User Manual 50[...]

Chapter 5 5 Extension I/O Installation[...]

PCM-9588 User Manual 52 5.1 PC-104 plus 5.2 PCI After apply force to the connector . the footprint of the modle / CPU board need t o be inse rted corr ectly. Aim the pin to the footprint and apply force evenly Backplane PCI Card After apply force to the PCI card, the footprint of PCI card need to be ins erted correctl y.[...]

Appendix A A Pin Assignments[...]

PCM-9588Us er Manual 54 A.1 CN2: CD in connector A.2 CN4: Audio connector T able A.1: CN2: CD In connector Part Number 1655304020 Footprint WF_4P_79_BOX_R1_D Description W AFER BOX 2.0mm 4P 180D(M) W/LOCK A2001WV2 -4P Pin Pin Name Signal T ype Signal Level 1 CD In Right IN 2A G N D G N D 3A G N D G N D 4 CD In Left IN T able A.2: CN4: Audio connect[...]

55 PCM-9588 User Manual Appendix A Pin Assignments A.3 CN5: Power connector 15 MIC1 In IN 16 AGND GN D T able A.2: CN4: Audio connector T able A.3: CN5: Power connector Part Number 1655412090 Footprint A TXCON-2X6V -42 Description Power CONN.6*2P 180D(M) DIP W/Fixed Lock Pin Pin Name Signal T ype Signal Level 1G N D G N D 2+ 5 V P W R + 5 V 3+ 5 V [...]

PCM-9588Us er Manual 56 A.4 CN6: Inverter connector A.5 CN8: VGA connector T able A.4: CN6: Inverter connector Part Number 1655305020 Footprint WHL5V -2M Description W AFER BOX 2.0mm 5P 180D MALE W/LOCK Pin Pin Name Signal T ype Signal Level 1+ 1 2 V P W R + 1 2 V 2G N D G N D 3 L VDS1_BKL TEN O UT +3.3V 4 L VDS1_VBR OD +3.3V 5+ 5 V P W R + 5 V T a[...]

57 PCM-9588 User Manual Appendix A Pin Assignments A.6 CN9: L VDS connector T able A.6: CN9: L VDS connector Part Number 1653920200 Footprint SPH20X2 Description *CONN. DF13-40DP-1.25V Pin Pin Name Signal T ype Signal Level 1V D D _ F P P W R + 5 V / + 3 . 3 V 2V D D _ F P P W R + 5 V / + 3 . 3 V 3G N D 4G N D 5V D D _ F P P W R + 5 V / + 3 . 3 V 6[...]

PCM-9588Us er Manual 58 A.7 CN10: TTL connector (High Bit s) 30 GND 31 L VDS_DCLK I/O +3V~+5V 32 L VDS_DDA T I/O +3V~+5V 33 GND 34 GND 35 L VDS_A_D3N OUT L VDS 36 L VDS_B_D3N OUT L VDS 37 L VDS_A_D3P OUT L VDS 38 L VDS_B_D3P OUT L VDS 39 NC 40 VCON OUT T able A.6: CN9: L VDS connecto r T able A.7: CN10: TTL connector (High Bits) Part Number 1653910[...]

59 PCM-9588 User Manual Appendix A Pin Assignments A.8 CN1 1: TTL connector (Low Bit s) T able A.8: CN1 1: TTL connector (Low Bit s) Part Number 1653920200 Footprint SPH20X2 Description CONN. 40P 90D 1.25mm SMD WO/Pb DF13-40DP-1.25V Pin Pin Name Signal T ype Signal Level 1 +V5_TFT PWR +5V 2 +V5_TFT PWR +5V 3G N D G N D 4G N D G N D 5 +V3_TFT PWR +3[...]

PCM-9588Us er Manual 60 A.9 CN12: LAN connector 31 Low R4 OUT TTL 32 Low R5 OUT TTL 33 GND GND 34 GND GND 35 CLOCK OUT TTL 36 VSYNC OUT TTL 37 DE 38 HSYNC OUT TTL 39 NC 40 Backlight Enable OUT T able A.8: CN1 1: TTL connector (Low Bit s) T able A.9: CN12: LAN connector Part Number 1653205201 Footprint BH5X2DV -2M Description BOX HEADER 5*2P 180D (M[...]

61 PCM-9588 User Manual Appendix A Pin Assignments A.10 CN13: HDD LED and POWER LED A.1 1 CN15: LPT / FDD connector T able A.10: CN13: HDD LED and POWER LED Part Number 1653003260 Footprint JH3X2S-2M Description PIN HEADER 3*2P 1 80D(M) 2.0mm SMD SOUARE PIN Pin Pin Name Signal T ype Signal Level 1N C 2P W R L E D - G N D G N D 3N C 4 PWR LED+ OUT +[...]

PCM-9588Us er Manual 62 A.12 CN16: IDE connector 15 D6 IMTR0# 16 GND GND 17 D7 - 18 GND GND 19 ACK# DS1# 20 GND GND 21 BUSY MTR1# 22 GND GND 23 PE WDA T A# 24 GND GND 25 SLCT WGA TE# 26 NC T able A.1 1: CN15: LPT / FDD connector T able A.12: CN16: IDE connector Part Number 1653220205 Footprint BH20X2DV -1 Description BOX HEADER 20*2P 180D(M) 2.54mm[...]

63 PCM-9588 User Manual Appendix A Pin Assignments A.13 CN17: PC104-plus connector 16 D D14 I/O +5V 17 D D0 I/O +5V 18 D D15 I/O +5V 19 G ND GND 21 D MARQ Out +5V 22 G ND GND 23 DIOW # Out +5V 24 G ND GND 25 DIOR # Out +5V 26 G ND GND 27 IORD Y Out +5V 28 CSEL Out +5V 29 DMACK# Out +5V 30 G ND GND 31 I NTRQ In +5V 32 NC 33 D A1 In +5V 34 PDIAG # In[...]

PCM-9588Us er Manual 64 A.14 CN19: COM1~4 connector T able A.14: CN19: COM1~4 Connector Part Number 1653220260 Footprint BH20X2SV Description BOX HEADER 20*2P 180D(M) 2.0mm SMD Pin Pin Name Signal T ype Signal Level 1 COM0_DCD# IN + 5V 2 COM0_DSR# IN +5V 3C O M 0 _ R X D I N + 5 V 4 COM0_RTS# I/O +5V 5 COM0_TXD OUT +5V 6 COM0_CTS# IN +5V 7 COM0_DTR[...]

65 PCM-9588 User Manual Appendix A Pin Assignments A.15 CN20: USB1/2 Connector A.16 CN22: Reset Button connector 32 COM3_DSR# IN +5V 33 COM3_RXD IN +5V 34 COM3_RTS# I/O +5V 35 COM3_TXD OUT +5V 36 COM3_CTS# IN +5V 37 COM3_DTR# I/O +5V 38 COM3_RI# IN +5V 39 GND 40 GND T able A.14: CN19: COM1~4 Connector T able A.15: CN20: USB1/2 Connector Part Number[...]

PCM-9588Us er Manual 66 A.17 CN23: Power Button connector A.18 CN24: SIR connector T able A.17: CN23: Po wer Button Connector Part Number 1655302020 Footprint WHL2V -2M Description W AFER BOX 2P 180D 2.0mm MALE W/Lock Pin Pin Name Signal T ype Signal Level 1 PM_PWRBTN# IN +3.3V 2 GND G ND T able A.18: CN24: SIR Connector Part Number 1655305020 Foot[...]

67 PCM-9588 User Manual Appendix A Pin Assignments A.19 CN25: PS2 Keyboard/Mouse connector A.20 CN26: CF TYPEII connector T able A.19: CN25: PS2 Keyboard/Mouse connector Part Number 1655306020 Footprint WHL6V -2M Description W AFER BOX 2.0mm 6P 180D(M) W/LOCK Pin Pin Name Signal T ype Signal Level 1 KBCLK IN +5V 2 KBDA T IN +5V 3 MSCLK IN +5V 4G N [...]

PCM-9588Us er Manual 68 A.21 CN27: -V5 and -V12 connector 20 IDE_PDA0 IN +5V 21 IDE_PDD0 I/O +5V 22 IDE_PDD1 I/O +5V 23 IDE_PDD2 I/O +5V 24 NC 25 GND GND 26 NC 27 IDE_PDD1 1 I/O +5V 28 IDE_PDD12 I/O +5V 29 IDE_PDD13 I/O +5V 30 IDE_PDD14 I/O +5V 31 IDE_PDD15 I/O +5V 32 IDE_PDCS#3 OUT +5V 33 NC 34 IDE_PDIOR# OUT +5V 35 IDE_PDIOW# OUT +5V 36 IDE_WE# O[...]

69 PCM-9588 User Manual Appendix A Pin Assignments A.22 CN28: USB3/4 Connector A.23 CN29: DDR2 SODIMM Socket T able A.22: CN28: USB3/4 Connector Part Number 1653205261 Footprint HD_5x2P_79_BOX _N10 Description PIN HEADER 5x2P 180D(M ) 2.0mm SMD IDIOT -PROOF Pin Pin Name Signal T ype Signal Level 1 +V5DUAL_USB1 PWR +5V 2 +V5DUAL_USB1 PWR +5V 3 USB2_[...]

PCM-9588Us er Manual 70 A.24 CN30: DVI connector T able A.24: CN30: DVI Connector Part Number 165391026 1 Footprint SPH10X2 Description *CONN. SMD 10*2P 180D(M)DF13-2 0DP-1.25V HRS Pin Pin Name Signal T ype Signal L evel 1 DVI_D0- OUT TMDS 2+ 5 V P W R + 5 V 3 DVI_D0+ OUT TMDS 4 DVI_CLK- OUT TMDS 5G N D G N D 6 DVI_CLK+ OUT TMDS 7 DVI_D1- OUT TMDS [...]

71 PCM-9588 User Manual Appendix A Pin Assignments A.25 CN31: SA T A 1 connector A.26 CN32: SA T A 2 connector T able A.25: CN31: SA T A 1 connector Part Number 1654003639 Footprint SA T A_7P_0-1770655 -1_D Description Pin Pin Name Signal T ype Signal Level 1G N D G N D 2 SA T A0 TX+ I/O 3 SA T A0 TX- I/O 4G N D G N D 5 SA T A0 RX- I/O 6 SA T A0 RX[...]

PCM-9588Us er Manual 72 A.27 CN33: Battery Connector A.28 CN34: LAN LED connector T able A.27: CN33: Battery Connector Part Number 1655902032 Footprint WHL2V -125 Description W AFER 2P 180D(M) 1.25mm DIP 5 3047-0210 Pin Pin Name Signal T ype Signal Level 1 +VBA T PWR 2G N D T able A.28: CN34: LAN LED Connector Part Number 1653004260 Footprint JH4X2[...]

73 PCM-9588 User Manual Appendix A Pin Assignments A.29 CN36: GPIO1 Connector A.30 CN37: GPIO2 Connector T able A.29: CN36: GPIO1 Connector Part Number 1653005261 Footprint HD_5x2P_79_BOX Description PIN HEADER SMD 5*2P 180D(M) 2.0mm Pin Pin Name Signal T ype Signal Level 1+ 5 V P W R + 5 V 2 GPIO4 I/O +5V 3 GPIO0 I/O +5V 4 GPIO5 I/O +5V 5 GPIO1 I/[...]

PCM-9588Us er Manual 74 A.31 CN38: USB5/6 Connector A.32 CN41: COM 5/6 (RS-422 / 485) connector T able A.31: CN38: USB5/6 Connector Part Number 1653205261 Footprint HD_5x2P_79_BOX_N10 Description PIN HEADER 5x2P 180D(M ) 2.0mm SMD IDIOT -PROOF Pin Pin Name Signal T ype Signal Level 1 +V5DUAL_US B2 PWR +5V 2 +V5DUAL_US B2 PWR +5V 3 USB4_z_P- I/O 4 U[...]

Appendix B B Optional Extras for the PCM-9588[...]

PCM-9588 User Manual 76 The PCM-9588 requires severa l cables for normal operation. Y ou can make them yourself or purchase an optional cab le ki t assembly , which includes the following B.1 PCM-10586-9588E Cable kit for PCM-9588 PCM-10586-9588E Inst allation wiring kit for PCM-9588T -M0A1E/ PCM-9588F-S0A1E The cable kit PCM-10586-9588E in cludes [...]

Appendix C C Programmable GPIO & Watchdog Timer[...]

PCM-9588 User Manual 78 C.1 W atchdog T imer ;The SCH31 14/SCH3106 Runtime base I/O ad dress is 800h ;Setting W atchDog time value location at offset 66h ;If set value "0", it is mean disab le W atchDog function. Superio_GPIO_Port = 800h mov dx,Superio_GPIO_Port + 66h mov al,00h out dx,al .model small .486p .st ack 256 .dat a SCH31 14_IO [...]

79 PCM-9588 User Manual Appendix C Programmable GPIO & Watchdog Timer C.2 GPIO Sample Code ;=============================================================== NEWIODELA Y Macro out 0ebh,al ENDM ;=============================================================== .model small .486p .stack 256 .data ;=====================================================[...]

PCM-9588 User Manual 80 db 'Fouth GPIO Chip T est Fail !! ',0Ah,0Dh,'$' db 'Fif th GPIO Chip T est Fail !! ',0Ah,0Dh,'$' db 'Sixth GPIO Ch ip T est Fail !! ',0Ah,0Dh,'$' db 'Seventh GPIO Chip T est Fail !!',0Ah,0Dh,'$' db 'Eighth GPIO Ch ip T est Fail !! ',0Ah[...]

81 PCM-9588 User Manual Appendix C Programmable GPIO & Watchdog Timer ; ax=5E78 ;function success, other va lue means function fail ; cl= n group of gpio ;=============================================================== ;=============================================================== ; Get GPIO Config ; Input: ; ax=5E87h ; bh=01h ; cl= n ; n mea[...]

PCM-9588 User Manual 82 ; ..... ; bit 7 = gpio 7 , 0 => L ow; 1 => High ;=============================================================== ;=============================================================== ; Set GPIO status ; Input: ; ax=5E87h ; bh=04h ; cl= n ; n means which group of GPIO you want to set ; bl= the n group o f gpio status ; bit 0[...]

83 PCM-9588 User Manual Appendix C Programmable GPIO & Watchdog Timer mov bx,0400h int 15h ;RA02 - END ;3. Check GPI 1,3,5,7 value ;RA02 - ST ART pop cx ;restore NO. of GPIO chip push cx ;save NO. of GPIO chip mov ax,5e87h mov bx,03FFh int 15h pop cx ;restore NO. of GPIO chip push cx ;save NO. of GPIO chip dec cx mov al,Fail_lengh t mul cl lea [...]

PCM-9588 User Manual 84 jne test_result ;RA02 - END ;RA02 cmp al,00h ;RA02 jne test_fail ;4.Set GPIO 1,3,5,7 as outpu t,GPIO 0,2,4,6 as input ;RA02 - ST ART pop cx push cx mov ax,5e87h mov bx,0255h int 15h ;RA02 - END ;4. Set GPIO 1,3,5,7 Output High ;RA02 - ST ART pop cx ;restore NO. of GPIO chip push cx ;save NO. of GPIO chip mov ax,5e87h mov bx,[...]

85 PCM-9588 User Manual Appendix C Programmable GPIO & Watchdog Timer push cx ;save NO. of GPIO chip mov ax,5e87h mov bx,0422h int 15h ;5. Check GPI 0,2,4,6 value pop cx ;restore NO. of GPIO chip push cx ;save NO. of GPIO chip mov ax,5e87h mov bx,03FFh int 15h pop cx ;restore NO. of GPIO chip push cx ;save NO. of GPIO chip dec cx mov al,Fail_le[...]

PCM-9588 User Manual 86 ;Output : AL - V alue read ;============================================================== Ct_I2CReadByteProcNear push cx mov dx,SMBus_Port +04h inc ch mov al,ch ;ID cmd(read) out dx,al NEWIODELA Y NEWIODELA Y call CT_Chk_SMBus_Read y pop ax mov dl,03h out dx,al ;Index NEWIODELA Y NEWIODELA Y mov dl,02h mov al,48h out dx,al [...]

87 PCM-9588 User Manual Appendix C Programmable GPIO & Watchdog Timer ; AL - V alue to write ;Output: none ;============================================================== Ct_I2CWriteByte ProcNear push ax push cx mov dx,SMBus_Port +04h mov al,ch ;ID cmd(Write) out dx,al call Delay5ms call Delay5ms call CT_Chk_SMBus_Ready pop ax mov dl,03h out dx[...]

PCM-9588 User Manual 88 clc mov cx,0800h Chk_I2c_OK: in al,dx ;get status NEWIODELA Y out dx,al ;clear status NEWIODELA Y test al, 02H ;termination of command ? jnz short Clear_final and al, NOT 40H;mask INUSE bit or al,al ;status OK ? jz short Clear_final test al,04h ;device error jnz short SMBus_Err loop short Chk_I2c_OK ;SMbus error due to timeo[...]

89 PCM-9588 User Manual Appendix C Programmable GPIO & Watchdog Timer push cs db 0EAh dw 0013h dw 0DA00h PhdebugRetAddr: popf Phoenix_debuger end p ;=============================================================== ; Program END ;=============================================================== END[...]

PCM-9588 User Manual 90[...]

Appendix D D Electrical Specifications[...]

PCM-9588 User Manual 92 D.1 Input Power D.1.1 Over-current protecti on The over-current protection value of the power supply must meet 1.5~2 times of the total power consumption. D.1.2 Power requirement Power requirement is based on system conf iguration. For example, system configu- ration = CPU board + peripheral (USB) + system device (IDE, SA T [...]

93 PCM-9588 User Manual Appendix D Electrical Specifications D.2 I/O Port T able D.1: I/O Port I/O Referen ce Signal Name Rated Output Inverter CN6 +12V 12V/1.5A +5V 5V/1.5A L VDS CN9 VDD_FP 5V/1A or 3.3V/1A TTL CN1 1 +V5_TFT 5V/1A +V3_TFT 3V/1A USB CN20 +V5DUAL _USB0 5V (0.5A/per channel, 1A optional) *Note 1 CN28 +V5DUAL _USB1 CN38 +V5DUAL _USB2 [...]

www .advantech.com Please verify specifications be fore quoting. This guide is intended for reference purposes only . All product specifications are subj ect to change without notice. No p art of this publicati on may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of t[...]