AEG 88060 manuale d’uso

FAVORIT 88060 VI DISHWASHER USER MANUAL[...]

CONTENTS 4 SAFETY INFORMATION 6 PRODUCT DE SCRIPTIO N 7 CONTR OL PANEL 8P R O G R A M M E S 10 OPTIONS 12 BEFORE FIRST USE 15 DAILY USE 18 CARE AND CLEANING 19 TROUBLES HOOTING 21 TE CHNICAL INFOR MATION ENVIRONMENT CONCERNS Recycle the materials with the symbol . Put the packaging in applicable containers to recycle it. Help protect the environmen[...]

FOR PERFECT RESULTS Thank you for choosing this AEG product. We hav e created it to give you impeccable performance for many years , wi th innovative technologies tha t help make life simpler – features you might not find on ordinary appliances. Please spend a few minutes reading t o get the very best from it. ACCESSORIES AND CONSUMABLES In the A[...]

SAFETY INFORMATION Before the installatio n and use of th e appliance, carefully read the supplied instructions. The manufacturer is not re- sponsible if an incorrect installation and use causes injuries and damages. Al- ways keep the instructions with the ap- pliance for future ref erence. CHILDREN AND VULNERABLE PEOPLE SAFETY WARNING! Risk of suf[...]

ble. Contact Service or an electrician to change a damaged mains cable. • Connect the mains plug to the mains socket only at the end of the in stalla- tion. Make sure that there is access to the mains plug after the installa- tion. • Do not pull the mains cable to dis- connect the appliance. A lways pull the mains plug. • Only for UK and Irel[...]

PRODUCT DESCRIPTION 1 2 3 4 5 8 10 6 7 12 9 11 1 Top spray arm 2 Upper spray arm 3 Lower spray arm 4 Filters 5 Rating plate 6 Salt container 7 Water hardness dial 8 Rinse aid dispenser 9 Detergent dispenser 10 Cutlery basket 11 Lower basket 12 Upper basket TIME BEAM Time Beam is a light beam that shows, on the kitchen floor: • The programme durat[...]

CONTROL PANEL 1 2 3 4 5 6 7 8 9 1 On/off button 2 Display 3 Delay touchpad 4 Programme touchpad 5 ExtraHygiene touchpad 6 ÖKO PLUS touchpad 7 Multitab touchpad 8 RESET touchpad 9 Indicators Indicators Salt indicator. This indicator is off while the programme operates. Rinse aid indicator. This indicator is off while the programme op- erates. End i[...]

PROGRAMMES Programme Type of soil Type of load Programme ph ases Options 1 1) All Crockery, cutlery, pots and pans Prewash Wash 45 °C or 70 °C Rinses Dry ExtraHygiene ÖKO PLUS 2 2) Heavy soil Crockery, cutlery, pots and pans Prewash Wash 70 °C Rinses Dry ÖKO PLUS 3 3) Normal soil Crockery and cutlery Prewash Wash 50 °C Rinses Dry 4 4) Fresh s[...]

Consumption v alues Programme 1) Duration (min) Energy (kWh) Water (l) 1 90 - 160 0.9 - 1.7 8 - 15 2 140 - 160 1.4 - 1.6 13 - 14 3 200 - 220 1.1 - 1.2 9 - 11 4 30 0.8 9 5 160 - 170 0.9 - 1.0 9 - 11 6 50 - 60 1.0 - 1.1 10 - 11 7 70 - 80 0.8 - 0.9 11 - 12 8 14 0.1 4 1) The water pressure and temperature, the variations of the mains supply, the option[...]

OPTIONS MULTITAB FUNCTION Activate this function only when you use the combi detergent tablets. This function deactivates the flow of rinse a id and salt. The related indicators are off. The programme duration can increase. Activating the multitab function Activate or deactivate the multi- tab function before th e start of a programme. You cannot a[...]

5. Press touchpad ( 5 ) to change the setting 6. Deactivate the appliance to confirm. SETTING THE TIME BEAM COLOUR Nine colours are avail able for this light beam. You can change the colour or deactivate it. 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A P[...]

BEFORE FIRST USE 1. Make sure that the set level of the water softener agrees w ith the water hardness in your area. If not, adjust the water softener. Contact your lo- cal water authority t o know the wa- ter hardness in your area. 2. Fill the salt container. 3. Fill the rinse aid dispenser. 4. Open th e water tap . 5. Processing residues can stay[...]

Manual adjustment Turn the water hardness dial to t he po- sition 1 or 2. Electronic adjustment 1. Press the on/off button to activate the appliance. 2. Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’. 3. Press and hold touchpads ( 4 ) and ( 5 ) at the same time until the indica- tors of touchpads ( [...]

FILLING THE RINSE AID DISPENSER M A X 1 2 3 4 + - A B D C CAUTION! Only use rinse aid for dishwas h- ers. Other products can cause damage to the appliance. The rinse aid, during the last rinsing phase, helps to dry the dishes without streaks and stains. 1. Press the release button ( D ) to open the lid ( C ). 2. Fill the rinse aid dispenser ( A ), [...]

DAILY USE 1. Open th e water tap . 2. Press the on/off button to activate the appliance. Make sure that the appliance is in setting mode. Refer to ’SETTING AND STARTING A PROGRAMME’. • If the salt indicator is on, fill the salt container. • If the rinse aid indicator is on, fill the rinse aid dispenser. 3. Load the baskets. 4. Add the deter[...]

USING THE DETERGENT 20 30 M A X 1 2 3 4 + - A B C CAUTION! Use only deterge nts for dish- washers. 1. Press the release button ( B ) to open the lid ( C ). 2. Put the detergent in the compart- ment ( A ) . 3. If the programme has a prewash phase, put a small quantity of de- tergent on the inner pa rt of the ap- pliance door. 4. If you use detergent[...]

2. Press the delay touchpad again and again until the display shows the de- lay time you want to set (from 1 to 24 hours). • The delay time flashes in the dis- play. • The delay indicator is on. 3. Close the appliance door. The countdown starts. • If you open the door, the display shows the countdown of the de- lay start that decreases with s[...]

CARE AND CLEANING WARNING! Before maintenance, deactivate the ap- pliance and disconnect th e mains plug from the mains socket. Dirty filters and clogged spray arms decrease the washing re- sults . Make a check regularly and, if necessary, clean them. CLEANING THE FILTERS A B C C A1 A2 1. Turn the filter ( A ) counter- clockwise and remove it. 2. T[...]

TROUBLESHOOTING The appliance does not start or it stops during operation. First try to find a solution to the prob- lem (refer to the table). If not, contact Service. With some prob lems, the dis play shows an alarm code: • - The appliance does not fill with water. • - The appliance does not drain the water. • - The anti-flood device is on. [...]

THE WASHING RESULTS AND DRYING RESULTS ARE NOT SATISFACTORY Problem Possible cause Possibl e solution The dishes are not clean . The filters are clogged. Clean the fi lters. The filters are not correctly assembled and installed. Make sure that the filters are correctly assembled and in- stalled. The spray ar ms are clog- ged. Remove remaining soil [...]

Problem Possible cause Possibl e solution The quantity of detergent was too much. Make sure that you add the correct quantity of detergent in the dispenser before you start a programme. Dry water drop stains on glasses and dishes. The released quantity o f rinse aid was not sufficient . Increase the released quanti- ty of rinse ai d. The quality of[...]

Water supply 1) Cold water or hot water 2) max. 60 °C Capacity Place settings 12 1) Connect the water inlet hose to a w ater tap with a 3/4'' thread. 2) If the hot water comes from alternative sources of e nergy, (e.g. solar panels, aeolian energy), use the hot water supply to decrease energy consumption. 22[...]

ENGLISH 23[...]

www.aeg.com/shop 117931990-A-192011[...]