Aiptek GO-HD+ manuale d’uso

[...]

FCC Compliance Statement: This device complies with Part 15 of the FCC Rules. Operation is subjected to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to co[...]

T able of Contents Getting Started ................................................................ 1 Knowing your camcorder parts ............................................................. 1 Installing the battery.............................................................................. 2 Charging the battery ...............................[...]

1 Getting Started Knowing your camcorder parts SD card slot (inside the battery cover) Bottom view T ripod socket Battery cover Flash strobe Lens Speaker Strap hook Power button Shutter button A V IN/OUT connector /Earphone Previous button/ Fast backward button LCD monitor Zoom (in/out) button Record button MENU button Next button/ Fast forward but[...]

2 Please charge the battery at least 8 hours for rst time use. 1. Connect the cable. Connect one end of the supplied AC adapter to the USB port of the camcorder and the other end to a wall outlet. OR Connect one end of the supplied USB cable to the USB port of the camcorder and the other end to a powered PC. Make sure the camcorder is powered of[...]

3 T o insert a memory card, do the followings: (1) Open the battery cover . (2) Gently push the card as indicated until the card reaches the bottom of the slot. T o remove the memory card, gently push the card and it will pop up. Then pull the card out of the slot. Inserting a memory card (optional) Open the LCD monitor or press and hold down the P[...]

4 Setting language 1. Power on the camcorder . 2. Press the MODE key to enter the MODE menu. 3. Use the Joystick switch to select the Setting mode and press OK to enter the menu screen. 4. Use the Joystick to select the Language item, and then Press OK to conrm. 5. Move the Joystick up/down to select a language. 6. When done, press OK to conr[...]

5 Reading LCD indicators 1 Mode icon Remaining recordable time Video resolution While Balance mode Picture resolution Exposure mode LED lights mode Flash mode Macro mode Histogram mode Battery life Selftimer mode Zoom ratio indicator NightShot mode SD card inserted Recording time 00:06:40 00:00:05 The LCD will display 16:9 ratio while setting as HD[...]

6 Recording a video clip 1. Adjust the focus: Normally the camcorder can auto focus without adjusting focus. If you want to take close-up pictures, you can push the Up button to switch to Macro mode ( ). Note: Please make sure your memory card is inserted before recording. - 30cm ~ (12” ~ ) 5cm ~ 30cm (2” ~ 12”) * At 1.5X xed zoom 2. Zoomi[...]

7 1. Adjust the focus: Normally the camcorder can auto focus without adjusting focus. If you want to take close-up pictures, you can push the Up button to switch to Macro mode ( ). Note: Please make sure your memory card is inserted before recording. - 30cm ~ (12” ~ ) 5cm ~ 30cm (2” ~ 12”) * At 1.5X xed zoom 2. Zooming: Move the Zoom butto[...]

8 Recording a voice clip 1. Power on the camcorder . 2. Press the MODE key to enter the MODE menu. 3. Use the Joystick switch to select the V oice Recorder mode and press OK to enter the menu screen. 4. Press the Record button to start recording 5. Press the Record button again to stop recording.[...]

9 The digital video recording technology allows you to record TV program via A V -IN cable. 1. T urn on your TV or DVD player . 2. Connect the A V cable to the A V -Out terminal on the TV or DVD player . (Normally , it’s not necessary to switch the mode, please refer to the User ’ s Manual of the TV or DVD player .) 3. Power on the camcorder . [...]

10 Playing back your recordings 1. Press the MODE button and use the Joystick to switch to “ My Works ” mode. Or press the Play/Pause button ( ) on the left side of the LCD monitor . 2. There are three folders below My works: V ideo, Picture, and V oice . Select Video, Picture or V oice, and then press the OK key to enter the index mode. 3. Ope[...]

1 1 Playing back your recordings on PC Installing software Please notice that the recorded videos are .mov format. So you need some special programs to view the recordings on PC. For rst time use, please make sure you have QuickT ime 7.0 player on your PC. If not, Please follow the below instructions to install the software rst. Please downlo[...]

12 Connecting the camcorder to TV Please follow the below instructions to connect your camcorder and TV via accessory A V cables for real-time display . Y ou can display your video clips and still pictures on your TV , sharing them with your friends and family . Connecting the camcorder to HDTV 1. T urn on your HD TV . 2. T urn on the Camcorder . 3[...]

13 Connecting the camcorder to Standard TV TV = T raditional CRT TV 1. Power on your TV and switch the TV to A V mode. 2. Connect the audio and video ends of the A V cable (yellow/white/red color) to the TV “A V -IN” jacks. 3. Power on the camcorder . 4. Connect the other end of the A V cable to the “A V out” port on your camcorder . When t[...]

14 Menu operation The menu items provide several options for you to ne-tune your camera functions. The following table gives details on menu operations. How to... Action Bring up the menu Press the MENU button. Move the highlight bar Use the Joystick to move up or down. Enter sub-menu/Conrm an item Press the OK key . Exit menu/Go back to uppe[...]

15 Menu items in Playback mode Power-on → Press the MODE button → Use the Joystick to switch to My Works mode → Select Video, Picture or V oice folder→ Press the OK button → Press the MENU button. Item Option Description Delete One Y es/No Delete current le. Delete All Y es/No Delete all pictures and video/audio les stored in the me[...]

16 Menu items in Setting mode Power-on → Press the MODE button → Select the Setting ( ) mode → Press the OK button. Item Option Description Date & T ime - Set date and time. Beep On/Off Enable/Disable beep sound. Flicker 50Hz Set icker frequency to 50Hz*. 60Hz Set icker frequency to 60Hz*. TV -Out NTSC Set TV system compatibility to[...]

17 Menu items in Setting mode (continued) * Flicker settings table: Region England Germany France Italy Spain Netherlands Russia Setting 50Hz 50Hz 50Hz 50Hz 50Hz 50Hz 50Hz Region Portugal America T aiwan China Japan Korea Thailand Setting 50Hz 60Hz 60Hz 50Hz 50/60Hz 60Hz 50Hz Icon Description Full battery life Moderate battery life Low battery life[...]

18 Still picture Video clip Number of shots Recording time (minute) 1 10 60 * shoot every 30 seconds ** ash is off *** resolution is set to 5M (2592x1944) * resolution is set to HD (1280x720 pixels) Note: This table is for your reference only . The actual battery life depends on your battery type and recharge level. Battery Life Storage Capacity[...]

19 Specications Item Description Model 5 Mega-pixel camera Image sensor 5 Mega (2592x1944 pixels) Resolution Still image: 3M/5M/8M 1280x720 (HD) 720x480 (D1) 352x240 (CIF) Lens 3X optical zoom lens File format MOV , JPEG, WA V Video frame rate 1280x720, up to 30fps 720x480, up to 30fps 352x240, up to 30fps External memory SD/MMC card (up to 32GB[...]

20 System requirements are different in dif ferent video resolution settings: Video Resolution PC system requirements HD (1280x720) @30fps OS = Windows XP SP2, V ista or above (QuickTime 7.0 or above) CPU = Pentium 4 3.0GHz or above System RAM = 512MB (1GB recommended) Display card = nvidia Geforece 7600 or A TI X1600 or above with 256MB of RAM D1 [...]

82-4 55- 9001 2 v1.0[...]