AirLive WT-2000R manuale d’uso

WT -2000R T urbo-G W ir eless Br oadband Router User’s Manual AirLive WT -200R User ’ s Manual 1[...]

Copyright The contents of this publica tion may not be reproduced in any part or as a whole, stored, transcribed in an information retrieval system, translated in to any lan guage, o r transmitte d in any form or by any m eans, mechanical, magnetic, electronic, op tical , photocopying, manual, or ot herwise, without the prior written permission. T [...]

T able of Contents Chapter 1 Introduction .............................................................................. 4 Functions and Features ......................................................................... 4 Packing List .......................................................................................... 6 Chapter 2 Hardware Ins[...]

C C C h h h a a a p p p t t t e e e r r r 1 1 1 I I I n n n t t t r r r o o o d d d u u u c c c t t t i i i o o o n n n Congratulat ions on your purc hase of this outstan ding W ireless Broa dband Router . This product is sp ecifically designed for Small Office and Home Office needs. It provides a complete SOHO solution fo r Internet surfing, and i[...]

Wir eless functions z High speed for wireless LAN connection Up to 54Mbps d ata rate by incorporating Or t hogo nal Frequency Division Multiplexing (OFDM). z Roaming Provides seamle ss roaming within the IEEE 80 2.1 1b (1 1M) and IEEE 802.1 1g (54M) WLAN infrastructure . z IEEE 802.1 1b compatible (1 1M) Allowing inter-operation among multiple vend[...]

Advanced functions z System time Supported Allow you to synchronize syste m time with netwo rk tim e s erver . z E-mail Alert Supported The router can send its info by mail. z Dynamic dns Supp orted At present,the router has 3 ddns.dyndns,TZO.com and dhs.org. z SNMP Supported The router supports basic SNMP function. z Routing T able Supported Now ,[...]

C C C h h h a a a p p p t t t e e e r r r 2 2 2 H H H a a a r r r d d d w w w a a a r r r e e e I I I n n n s s s t t t a a a l l l l l l a a a t t t i i i o o o n n n 2.1 Panel Layout 2.1.1. Fr ont Panel Figure 2-1 Front Panel LED: Ports: Port Description PWR Power inlet W AN the port where you w ill connect your cable (or DSL) modem or Ethernet r[...]

2.1.2. Rear Panel Figure 2-2 Re ar Panel LED: LED Function Color S tatus Description Power Power indication Green On Power is being applied to this produ ct. S tatus System statu s Green Blinking S tatus is flashed once per second to indicate system is alive. WA N WA N p o r t activity Green On The W AN port is linked. Blinking The W AN port is sen[...]

2.2 Procedur e for Hardware Installation 2. Decide where to place your Wir eless Broadband Router Y ou can place your Wi reless Broadband Router on a desk or other flat surface, or you can m ount it on a wall. For optimal perfor m ance, place yo ur W ireless Broadband Router in the cen ter of your office (or your home) in a location that is away fr[...]

C C C h h h a a a p p p t t t e e e r r r 3 3 3 N N N e e e t t t w w w o o o r r r k k k S S S e e e t t t t t t i i i n n n g g g s s s a a a n n n d d d S S S o o o f f f t t t w w w a a a r r r e e e I I I n n n s s s t t t a a a l l l l l l a a a t t t i i i o o o n n n T o use this product correct ly , you ha ve to properly confi gure the net[...]

C C C h h h a a a p p p t t t e e e r r r 4 4 4 C C C o o o n n n f f f i i i g g g u u u r r r i i i n n n g g g W W W i i i r r r e e e l l l e e e s s s s s s B B B r r r o o o a a a d d d b b b a a a n n n d d d R R R o o o u u u t t t e e e r r r This product provides W eb based confi guration scheme, t hat is, configuring by y our W eb browse[...]

4.1 S tart-up and Log in Activate your browser, and disable the proxy or add the IP address of this prod uct into the exceptions . Then, type this prod uct’ s IP address in the L ocation (for Netscape) or Address (for IE) fiel d and press ENTER. For example: http://192.168.1.2 54 . After the connection is established, y ou will see the web user i[...]

4.2 S tatus This option pr ovides the function fo r observing this produc t’ s working sta tus: A. W AN Por t S tatus. If the W AN port is assigned a dynamic IP , there may appear a “ Re new ” or “ Release ” button on the Sidenote column. Y ou can click this butto n to renew or release IP m anually . B. Statistics of W AN: enables you to [...]

4.3 Wiz ard Setup W izard will guide you through a basic configuration procedure step by step.Press ”Next >” Setup Wi zard - Select W AN T y pe : For detail settings, please refer to 4.4. 1 primary setup. AirLive WT -200R User ’ s Manual 14[...]

4.4 Basic Setting 4.4.1 Primary Setup – W AN T ype, V i rtual Computers Press “Change” AirLive WT -200R User ’ s Manual 15[...]

This option is primary to enab le this product to work properly . The setting items and the web appearance depend on the W AN ty pe. Choose correct W AN ty pe before you start . 1. LAN IP Addr ess : the local IP address of this device. The computers on your network must use the LAN IP address of your product as their Default Gateway . Y ou can chan[...]

4.4.1.3 Dynam ic IP Addr ess with Road Runner Session Management.(e.g. T elstra BigPond) 1. LAN IP Address is the IP address of this pro d uct. It m ust be th e defau lt gateway of your computers. 2. WAN Type is Dynam ic IP Ad dress. If the WAN type is not correct, change it! 3. H ost Name: option al. Required by some ISPs, e.g. @Home. 4. Renew IP [...]

2. Server IP Address: the IP address of the PPTP server . 3. PPTP Account and Pass word: the account a nd password you r ISP assigned to yo u. If you don't want to change the pass word, keep it empty . 3. Con nection ID: optional . Input the co nnection ID if your ISP requires it. 4. Maximum Idle Time: the time of no activity to disconnect you[...]

4.4.1.6 L 2TP First,Please check your ISP assigned and Select St atic IP Ad dress or Dynamic IP A ddress. For example:Use S tatic 1. My I P Address and My Subnet Mask: the privat e IP address and subnet mask your ISP assigned to you. 2. Server IP Address: the IP address of the PPTP server . 3. PPTP Account and Pass word: the account a nd password y[...]

4.4.1.7 V irtual Computers(Only for S tatic and dynamic IP addres s W an type ) V irtual Computer enables you to use the original NA T feature, and allows you to setup the one-to-one mapping of multiple global IP address and local IP address. AirLive WT -200R User ’ s Manual 20[...]

• Global IP: Ent er the global IP addres s assigned by your ISP . • Local IP: Enter the local IP addr ess of your LAN PC corresponding to th e global IP address. • Enable: Check this ite m to enab le the V irtual Computer feature. 4.4.2 DHCP Server Press “More>>” The settings of a TCP/IP environ m ent include h ost IP , Su bnet Mask[...]

This function enables you to assign another gateway to your PC, when DHCP server offers an IP to your PC. 4.4.3 W ire less Setting, 802.1X settin g and WDS W ireless settings allow you to set the wireless configuration items. 1. Wir eless : The user ca n enable or disalbe wirel ess function. 2. Network ID (SSID) : Network ID is used for identifying[...]

5. WEP Key 1, 2, 3 & 4 : When you enable th e 128 or 64 bit WEP key securit y , please sel ect one WEP key to be used and input 2 6 or 10 hexadecimal (0, 1, 2…8, 9, A, B…F) digits. 6. Pass-phrase Ge nerator: Since hexa decim al characters are not easily remembered, this device of fers a conversion utility to con vert a sim ple word or phras[...]

If you select HEX,you have to fill in 64 hexadecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII,t he length of pres hare key is from 8 to 63. 2. Fill in the key, Ex 12345678 WP A Check Box wa s used to switch the f unction of the WP A. When the WP A function is enabled, the W ireless user mus t authenticate to t his router first to use th e Network[...]

WP A2-PSK(AES) 1. Select Pre-share Key Mode If you select HEX, you have to fill in 64 hex adecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of Pre-sh are key is from 8 to 63. 2. Fill in the key, Ex 12345678 AirLive WT -200R User ’ s Manual 25[...]

WP A2(AES) Check Box was used to switch the function of the WP A. When the WP A function is enabled, the Wireless user must authen ticate to this router first to us e the Network service. RADIUS Server IP addre ss or the 802.1X server ’s dom ain-name. Select RADIUS Shared Key If you select HEX, you have to fill in 64 hex adecimal (0, 1, 2…8, 9,[...]

WP A-PSK /WP A2-PSK The router will detect automatically which Secu rity type(Wpa-psk version 1 or 2) the client uses to encrypt. 1. Select Pre-share Key Mode If you select HEX, you have to fill in 64 hex adecimal (0, 1, 2…8, 9, A, B…F) digits If ASCII, the length of Pre-sh are key is from 8 to 63. 2. Fill in the key, Ex 12345678 AirLive WT -20[...]

WP A/WP A2 Check Box was used to switch the function of the WP A. When the WP A function is enabled, the Wireless user must authen ticate to this router first to us e the Network service. RADIUS Server The router will detect automatically which Secu rity type(Wpa-psk version 1 or 2) the client uses to encrypt. IP addre ss or the 802.1X server ’s [...]

WDS(Wir eless Distribution System) WDS operati on as defined by the IEEE802.11 sta ndard has been m ade available. Using WDS it is poss ible to wirelessly connect Access Points, an d in doing so extend a wired infrastructure t o locations where cabling is not possible or inefficient to im plement. AirLive WT -200R User ’ s Manual 29[...]

4.5 Port Forwarding 4.5.1 V irtual Server AirLive WT -200R User ’ s Manual 30[...]

This product’ s NA T firewall filters out unrecognized pack ets to pro tect your Intranet, so all hosts behind this product are invisible to the outside world. If you wish, y ou can make so me of them accessible by enabling the V irtual Server Mapping. A virtual ser ver is defined as a Service Port , and all requests to this port will be redirect[...]

4.5.2 Special AP Some applications require multiple connection s, like Internet games, V ideo con ferencing, Internet telephony , etc. Because of the firewall function, these applicatio ns cannot work wi th a pure NA T router . The Special Applications feature allows some of these applications to work with this produ ct. If the m echan ism of Speci[...]

4.5.3 Miscellaneous Items IP Addr ess of DMZ Host DMZ (DeMilitarized Zone) Host is a host without the protec tio n of firewall. It allows a computer to be exposed to unrestrict ed 2-way comm unication for Internet gam es, V ideo conferenci ng, Internet teleph ony and other special applications. NOTE: This feature should be used only whe n needed. N[...]

4.6 Security Settings AirLive WT -200R User ’ s Manual 34[...]

4.6.1 Packet Filter Packet Filter enables you to co ntrol what packets are allowed to pass the router . Outbound filter applies on all outbound p ackets. However , Inbound filter ap plies on packet s that destined to V i rtual Serv ers or DMZ host only . Y ou can select one of the two filtering policies: 1. Allow all to pass except those match the [...]

For source or destination port, you can define a single port (80) or a range of por ts (1000-1999). Add prefix "T" or "U" to speci fy TCP or UD P protocol. For exam ple, T80, U53, U2000-2999. No prefix indicates both TC P a nd UDP are defin ed. An empty implies all port addresses. Packet Filter can work with Scheduling Rules , a[...]

Others are all blocked. Example 2: (1.2.3.10 0-1.2.3.1 19) T hey can do everyt hing except read n et news (port 1 19) an d transfer files via FT P (port 21) Others are all allowed. After Inbound Pa cket Filter setting is configured, click the save button. Outbound Filter: To enab le Outbound Packet Filter cl ick the check box next to Enable in the [...]

(192.168.1 .100-192.168.1.149) They are allowe d to send mail (port 25), receive mail (port 110), and browse Internet (port 80); port 53 (DNS) is necessary to resolve t he domain name. (192.168.1 .10-192.168.1.20) They can do everything (block nothing) Others are all blocked. AirLive WT -200R User ’ s Manual 38[...]

Example 2: (192.168.1. 100-192.168.1.1 19 ) They can do everything except rea d net news (port 1 19) and transfe r files via FTP (port 21) Others are allowed After Outbound Packet Filter setting is configured, click the save button. AirLive WT -200R User ’ s Manual 39[...]

4.6.2 Domain Filter Domain Filter Let you prevent users under this de vice from accessing specific URLs. Domain Filter Enable Check if you want to enable Domain Filter . Log DNS Query Check if you want to log the a ction wh en someone accesses the specific URLs. Privilege IP Addr esses Range Setting a group of hosts and privilege these ho sts to ac[...]

In this example: 1. URL include “www .m sn.com” will be blocked, and th e action will be record in log-file. 2. URL include “www .sina.com” will not be blocked, but the action will be record in log-file. 3. URL include “www .google.com” will be blocked, bu t the action will not be record in log-file. 4. IP address X.X.X.1~ X. X.X.20 can[...]

4.6.3 URL Blocking URL Blockin g will block LAN computers to connect to pre-defined W ebsites. The major difference between “Domain filter” and “URL Bl ocking” is Domain filter require user to input suffix (like .com or .org, etc), while URL Blocking require user to input a keyword on ly . In other words, Domain filter can block s pecific w[...]

In this example: 1. URL include “msn” will be blocked, and the action will be record in log-file. 2. URL include “sina” will be blocked, but the action will be record in log-file 3. URL include “cnnsi” will not be blocked, but the action will be record in log-file. 4. URL include “espn” will be blocked, but the action will be record[...]

4.6.4 MAC Addr ess Control MAC Address Control allows you to assi gn different access right for dif ferent users and to assign a specific IP address to a certain MAC address. MAC Address Control Check “En able” to enable the “MAC Address Control”. All of th e settings in this page will take effect only when “Enable” is checked. Connecti[...]

allow or de ny the clients, who se MAC addresses are not in the "Control table", to associate to the wireless LAN. Control table "Control tabl e" is the table at the bottom of the "MAC Address C ontrol" page. Each row of this table indicates the MA C address and the e xpected IP addre ss mapping of a client. There are [...]

Previous page and Next Page T o make this setup pa ge simple and clear , we have divided the “C ontrol table” into se veral pages. Y ou can use these buttons to navigate to dif ferent pages. AirLive WT -200R User ’ s Manual 46[...]

Example: In this scenario, there are three clients listed in the Cont rol Table. Clients 1 a nd 2 are wireless, and client 3 is wired. 1.The "MAC Address Control" fu nction is enabled. 2."Connection control" is en abled, and all of the wired an d wireless clients not listed in the "Contro l table" are "allowed&quo[...]

6.Clients 1 and 2 are allowed to associate to the wirele ss LAN, but a wireless client with a MAC address not specified in the Control tab le i s denied to asso ciate to the wireless LAN. Client 3 is a wired client and so is not affected by Association control. 4.6.5 Miscellaneous Items Remote Administrator Host/Port In general, only Intranet user [...]

port address, ACK, SEQ number and so on. And the rout er will check every incoming packet to detect if this packet is valid. DoS Attack Detection When this feature is enabled, the router will detect and log the DoS attack comes from the Internet. Currently , the router can detect the following DoS attack: SYN Attack, W i nNuke, Port Scan, Ping of D[...]

4.7.1 System T ime Get Date and Time by NTP Protocol Selected if you want to Get Date and T ime by NTP Protocol. Time Server Select a NTP time server to consult UTC time Time Z one Select a time zone where this device locates. Set Date and T ime manually Selected if you want to Set Date and T ime manually . Set Date and T ime manually Selected if y[...]

4.7.2 System Log This page s upport two me thods to export syst em logs to spec ific destination by m eans of syslog(UDP ) and SMTP(TCP). The items you have to setup including: IP Addr ess for Syslog Host IP of destination wh ere syslogs will be sent to. Check Enable to enable this function . E-mail Alert Enable Check if you want to enable Email al[...]

4.7.3 Dynamic DNS To host your s erver on a changing IP address, you have t o use dynamic dom ain name service (D DNS). So that anyone wishing to reach your host only needs to know the name of it. Dynamic DNS will map the name of your host to your current IP addr ess, which changes each time you connect your Internet service provider. Before you en[...]

Username/E-mail Password/Key You will get this information whe n you regi ster an account on a Dynam ic DNS server. Example: After Dynamic DNS setting is configured, click the save button. AirLive WT -200R User ’ s Manual 53[...]

4.7.4 SNMP Setting In brief, SNMP , th e Simple Network Management Protocol, is a protocol designed to give a user the capability to remotely manage a computer netwo rk by po lling and setting terminal values and monitoring network events. Enable SNMP Y ou must check either Local or Remote or both to enab le SNMP function. If Local is checked, this[...]

4.7.5 Routing Routing T ables allow you to determ ine which physical interface ad dress to use for outgoing IP data gram s. If you have more than one routers and subn ets, you will need to enable routing table to allow packets to find pro per routing path and allow dif ferent subn ets to communicate with each other . Routing T a ble settings are se[...]

Example: Configurati on on NA T Route r Destination SubnetMask Gatewa y Hop Enab led 192.168.1.0 255.255.255.0 192 .168.1.216 1 ˇ 192.168.0.0 255.255.255.0 192 .168.1.103 1 ˇ So if, for example, the client3 wanted to send an IP data gram to 192.168.0.2, it would use the above table to determine t hat it had to go via 1 92.168.1.103 (a gateway) , [...]

4.7.6 Schedule Rule Y ou can set the schedule time to decide which service will be turned on or off. Select the “enable” item. Press “Add New Rule” AirLive WT -200R User ’ s Manual 57[...]

Y ou can writ e a rule name and set w hich day and what ti me to schedule from “S tart T ime” to “End T im e”. The following example conf igure “ftp ti m e” as everyday 14:10 to 16:20 After c onfigure Rule 1 Æ AirLive WT -200R User ’ s Manual 58[...]

Schedule Enable Selected if you want to Enable the Schedu ler . Edit T o edit the schedule rule. Delete T o delete the schedule rule, and the rule# of the ru le s behind the deleted one will decrease one automatically . Schedule Rule can be apply to V irtual serv er and Pack et Filter , for example: Exanple1: Vir tual Server – Apply Rule#1 (ftp t[...]

4.8 Maintenance AirLive WT -200R User ’ s Manual 60[...]

4.8.1 Chan ge Password Y ou can change Password here. W e strongly rec ommend you to c hange the system password for securi ty reason. AirLive WT -200R User ’ s Manual 61[...]

4.8.2 Sys tem Log Y ou can V iew system log by clicking the Vi ew L og button AirLive WT -200R User ’ s Manual 62[...]

4.8.3 Firmwar e Upgrade Y ou can upgrade firmware by clicking Firmware Upgrade button. 4.8.4 Backup Setting Y ou can backup your settings by clicking the Backup Setting b utton and save it as a bi n file. Once you want t o restore these settings, please c lick Firmware Upgrade button and use the bin fil e you saved. 4.8.5 Reset to default AirLive W[...]

Y ou can also reset this product to factory default by click ing the Reset to default button. 4.8.6 Reboo t Y ou can al so reboot this prod uct by clicking the Reboot button. 4.8.7 Miscella neous Items AirLive WT -200R User ’ s Manual 64[...]

MAC Address for W a ke -on-LAN W ake-on- LAN is a technology that enables you to power up a networked device remotely . In order to enjoy this feature, the ta rget device m ust be W ake-on-LAN enabled and you have to know the MA C address of this de vice, say 00-1 1-22-33-44 -55. Clicking "W ake up" button will make th e router to send t [...]

A A A p p p p p p e e e n n n d d d i i i x x x A A A T T T C C C P P P / / / I I I P P P C C C o o o n n n f f f i i i g g g u u u r r r a a a t t t i i i o o o n n n f f f o o o r r r W W W i i i n n n d d d o o o w w w s s s 9 9 9 5 5 5 / / / 9 9 9 8 8 8 This section i ntroduces you h ow to install TCP/ IP protocol into y our personal com puter [...]

6. The TCP/IP protocol sh all be listed in the Network window . Click OK to com plete th e install procedure and restart your PC to enable the TCP/IP protocol. A.2 Set TCP/IP Pr otocol f or W orking with NA T Router 1. Click St a r t button an d choose Settings , then click Contr ol Panel . 2. Double click Network icon. Select the TCP/IP line that [...]

a. Select Obtain an IP add ress automatical ly in the IP Address tab. b. Don’t input any value in the Gateway tab. AirLive WT -200R User ’ s Manual 68[...]

c. Choose Disable DNS in the DNS Configuration tab. B. Configure IP manually a. Select Specify an IP addr ess in the IP Addr ess tab. The default IP address of this product is 192.168.1.254. So p lease use 192.168.1.xxx (xxx is between 1 and 2 53) for IP Address f ield and 255.255.2 55.0 for Subnet M ask field. AirLive WT -200R User ’ s Manual 69[...]

b. In the Gateway tab, add the IP address of this product (default IP is 192.168 .1.254) in the New gateway field a nd click Add button. c. In the DNS Configuration tab, add th e DNS va lu es which are provided by the ISP into DNS Server Search Order field and click Add button. AirLive WT -200R User ’ s Manual 70[...]

A A A p p p p p p e e e n n n d d d i i i x x x B B B 8 8 8 0 0 0 2 2 2 . . . 1 1 1 x x x S S S e e e t t t t t t i i i n n n g g g Figure 1: T esting Environm ent (Use W in dows 2000 Radius Server) 1 Equipment Details PC1: Microsoft Windows XP Profession al without Service Pack 1. AMIT 531C Wirel ess Cardbus:3.0.3.0 Driver versio n: PC2: Microsoft[...]

5.Set RADIU S server sha red key . 6.Configure WEP key and 802.1X setting. The following test will use the inbuilt 802.1 X a uthentication method such as ,EAP _TLS, PEAP_CHAPv2(W indows XP with SP1 only), and PEA P_TLS(W indows XP with SP1 o nly) using the Smart Card or other Certificate of the W indows XP Professional. 3. DUT and Windows 2000 Radi[...]

Figure 2: Enable IEEE 802.1X access control AirLive WT -200R User ’ s Manual 73[...]

Figure 3: Sm art card or certificate properties 4. W indows 2000 RADIUS server Authe ntication testing: 4.1DUT aut henticate PC1 using certificate. (P C2 follows the same test procedures.) 1. Download and install the certificate on PC1. (Fig 4) 2. PC1 choose the SSID of DUT as the Access Poi nt. 3. Set authentication type of wireless client and RAD[...]

Figure 4: Certificate in formation on PC1 Figure 5: Authenticating Figure 6: Authentication success 4.2 DUT authenticate PC2 using PEAP-TLS. 1. PC2 choose the SSID of DUT as the Access Poi nt. 2. Set authentication type of wireless client and RADIUS server both to PEAP_TLS. 3. Disable the wireless connection and e nable again. 4.The DUT will send t[...]

and end the authentication procedure. 6. T erminate the test steps when PC2 ge t dynamic IP and PING remote host successfully . Support T ype: The r outer supports the ty pes of 802.1x Authenticat ion: PEAP-CHAPv 2 and PEAP-TLS. Note. 1.PC1 is on W indows XP platform without Service Pack 1. 2.PC2 is on W indows XP plat form with Se rvice Pack 1a. 3[...]

Or Anothe r Configuration: W PA-PSK In fact, it is not necessary for this function to authen ticate by Radius Se rver, the client an d wireless Router authenticate by them selves. Method1: 1. Go to the Web manager of Wirele ss Router to confi gure, like below: 2. Go to Ody ssey Client Ma nager , first choose “Net work” Before doi ng that, you s[...]

3. Add and e dit some settings: AirLive WT -200R User ’ s Manual 78[...]

4. Back to C onnection: Then Select “Connect to network” Y ou will see: Method2: 1. First, patc h windows XP and have t o install “Service pa ckage 1” Patch: http://www .microsoft.com/downloads/details.aspx?di splaylang=en &Fam ilyID =5039 ef4a-61e0-4c44-94f0-c25 c9de0ace9 2. Then reboot. 3. Setting o n the router and client : Router: C[...]

Choose “V iew available Wireless Net works” like be low: Advanced Æ choose “123kk” AirLive WT -200R User ’ s Manual 80[...]

WP A: For this function, we need the server to authenticate. This function is like 802 .1x. The above i s our environment: Method 1: 1. The UserA or U serB have to get certi ficate from Radi us, first. http://192.16 8.122.1/certsrv account : fae1 passwd : fae1 2. Then, Install this certificate and finish. 3. Go to the Web manager of Wirele ss Route[...]

4. Go to Odys sey Client Manager , choose “Profiles” and S etup Profile na me as “1” Login nam e and passwd are fae1 and fae1. Remember that you get certificate from Radius in Step1. AirLive WT -200R User ’ s Manual 82[...]

5. Then Choose “cer tificate” like above. 6. Then go to Authentication an d first Remove E AP/ TLS and Add EAP/ TLS again. AirLive WT -200R User ’ s Manual 83[...]

7. Go “Network” and Select “1” and ok AirLive WT -200R User ’ s Manual 84[...]

8. Back to Connection and Select “123kk. If successfully , the wireless client has to authenticate with Radius Server , like below: 9.Result: Method 2: 1. The UserA or U serB have to get certi ficate from Radi us,first. http://192.16 8.122.1/certsrv account:fae1 passwd:fae1 AirLive WT -200R User ’ s Manual 85[...]

2. Then Install this certificate and finish. 3. Setting o n the router and client : Router: Client: Go to “Network Connection” and select wireless ada pter . Choose “V iew available Wireless Net works” like be low: Advanced Æ choose “123kk” Select “W irelessCA and Enable” in T rusted ro ot certificate authority: AirLive WT -200R Us[...]

Then, if the wireless client wants to associate, it has to request to authenticate. AirLive WT -200R User ’ s Manual 87[...]

A A A p p p p p p e e e n n n d d d i i i x x x D D D W W W D D D S S S S S S e e e t t t t t t i i i n n n g g g How to setup and work: First, check the Wlan-mac address of AP1,AP2 and AP3.Please go to command mode and use “Arp –a ”. If you can not find the information of Mac, please make the cable to plug in lan-p ort of ap and ping the lan[...]

If the Settings are ok,the client1 and client2 can get ip from dh c p server of AP1.Th en Client1 and Client2 can get information ea ch other . AP1 Setting: AP1 ÅÆ AP2(Remote Mac: 00-50-18-00-0f-fd) AP1 ÅÆ AP3(Remote Mac: 00-50-18-00-0f-fc) AirLive WT -200R User ’ s Manual 89[...]

AP2 Setting: AP2 ÅÆ AP1(Remote Mac: 00-50-18-00-0f-fe) AP3 Setting AP3 ÅÆ AP1(Remote Mac: 00-50-18-00-0f-fe) AirLive WT -200R User ’ s Manual 90[...]

AirLive WT -200R User ’ s Manual 91[...]

A A A p p p p p p e e e n n n d d d i i i x x x E E E F F F A A A Q Q Q a a a n n n d d d T T T r r r o o o u u u b b b l l l e e e s s s h h h o o o o o o t t t i i i n n n g g g What can I do when I have some trouble at the first time? 1. Why can I not configur e the router even if the cable is plugged in the ports of Router and the led is also l[...]

Whatever I setup, the pc can not get ip. Pl ease check S tatus Led and refer to the Q2: 2.Why can I not connect the router even if the cable is plugged in Lan port and the led is light? A: First, please check S t atus Le d. If the device is normal, t he led will blink per second. If not, please check How blinking S t atus led shows. There are many [...]

about 8 times, the RESTORE process is completed. However , if LED flashes 2 times, repeat. 2. Restore directly when the r o uter po wer on First, push the RESET button about 5 second s (S tatus will start flashing ab out 5 tim es), remove the finger . The RESTORE process is completed. 4.How to do r ecovery mode when the router is abnormal ? A: Allo[...]

St e p 3 : Please use the exe-file of fw and click as below: Then click” Upgrade” if necessary , please input password ”adm in” .Then reset to de fault and refer t o Q1 How to connect Router . However , if th ose methods can not make the router n ormal, please send the u nit to the seller to chec k, thanks. 5.Why can I not connect Internet [...]

6.When I use S tatic IP Addr ess to roam Internet, I can a ccess or ping global IP 202.93.91.218, But I can not access the site that inputs domain name, for example http://espn.com ? A: Please check the dns configuration of S tatic IP Address. P lease refer to the information of ISP and assign one or two in dns item. AirLive WT -200R User ’ s Man[...]

How do I connect router by using wireless? 1.How to start to use wir eless? A: First, make sure that you already installed wireless client device in your computer . Then check the Configuratio n of wireless rout er . The de fault is as below: About wireless client, you will see wireless icon: Then click and will see the ap list that wireless client[...]

If successfully , the computer will show and get ip fr om router: 2.When I use AES encryption of WP A-PSK to connect even if I input the corr ect pre-shar e key? A: First, you must check if the d river of wireless clie nt supports AES encryption. Please refer to the below: If SSID is default and click “Properties” to check if th e driver of wir[...]

3.When I use wir eless to connect the router , but I find the signal is very low even if I am close to the ro uter? A: Please check if the wireless client is normal, first. If yes, please send the unit to the seller and v erify What the problem is. AirLive WT -200R User ’ s Manual 99[...]