Aleratec 280112 manuale d’uso

USER GUIDE Aleratec DVD/CD RoboRacer SA™ Part No. 2801 12, 2801 12EUR[...]

www .aleratec.com Copyright/Model Identification The content of this manual is for informational purposes only and is subject to change without notice. This manual is copyright with all rights reserved. Under copyright laws, this manual and the software described within may not be copied, except in the normal use of the product(s) described within[...]

www .aleratec.com Radio/TV Interference Statement The equipment described in this guide emits radio frequency energy . If it is not installed in accordance with the manufacturer ’ s instructions, it may cause interference with radio or television reception. This equipment has been tested and found to comply with the limits for a Class B digital d[...]

www .aleratec.com Safety Regulations W ARNING T o prevent re or shock hazard, do not expose the unit to rain or moisture. T o avoid electrical shock, do not open the cabinet. Refer servicing to authorized personnel only . CAUTION As the laser beam in these DVD/CD Duplicators is harmful to the eyes, do not attempt to disassemble the cabinet. Refe[...]

www .aleratec.com T able of Contents Introduction .......................................................................................... 1 Included Items ............................................................................................ 1 Key Items – DVD/CD RoboRacer SA ....................................................... 2 DVD/C[...]

www .aleratec.com[...]

www .aleratec.com 1 Introduction Thank you for purchasing this DVD/CD RoboRacer SA. Please read this User Guide thoroughly before using this product. • Page 2 shows the Key Features of the DVD/CD RoboRacer SA • Page 3 shows the Duplicator LCD Display Panel. Included Items • 1 DVD/CD RoboRacer SA • 1 Disc Output Bin Holder • 1 100-Disc Cap[...]

www .aleratec.com 2 Introduction Key Items – DVD/CD RoboRacer SA 1 4 5 6 8 A B 1. Clear Plastic Disc Guide Rods 2. LCD Display Panel 3. Control Panel 4. Disc T ray Control Arm 5. Disc Input Bin 6. Protective Cover 7. Disc Bin Holder 8. Disc Output Bin A. Power Plug B. High Performance Cooling Fan C. USB 7 2 3 C[...]

www .aleratec.com 3 Introduction DVD/CD RoboRacer SA Display Panel 1 Display shows all functions and messages 2 Power Indicator 3 LEFT Scroll Button 4 RIGHT Scroll Button 5 ENTER Button The left and right scroll buttons are used to navigate through the operating menu, while the enter and escape buttons are used to select or cancel menu settings. 6 [...]

www .aleratec.com 4 Precautions Before installing your DVD/CD RoboRacer SA, please read the following. Installation A void placing the DVD/CD RoboRacer SA in a location subject to: • High humidity • High temperature • Excessive dust • Mechanical vibration • Direct sunlight • Electromagnetic radiation Operation Do not move the DVD/CD Rob[...]

www .aleratec.com 5 Overview Main Menu This section provides a listing of the functions on the DVD/CD RoboRacer SA. Detailed descriptions of each function are given in the next section. The functions are numbered for easy reference; these numbers are also used in the next section. There are 5 main menu items that will display in the DVD/CD RoboRace[...]

www .aleratec.com 6 Image Load Image Delete Image Burn Image Compare Image Overview Subfunctions The main menu “Image” function has 4 subfunctions. These are:[...]

www .aleratec.com 7 Overview Subfunctions The main menu “Setup” function has 13 subfunctions. These are: Copy Mode Over Burn Mode Read Error Skip Auto V erify CD Burn Speed DVD Burn Speed Default Reload Format Hard Disk T est Mode Set System Sound Erase Disc Software ID Reset Robot Setup Input Bin Pointer 1 Pointer 2 Demo Run[...]

www .aleratec.com 8 Using the DVD/CD Duplicator Main Menu: Multi Duplicate This is the default mode of the DVD/CD RoboRacer SA controller . This function will activate the duplication process. 1. Load a source disc in the input bin and load blank discs for the number of copies needed. Multi Duplicate has a special feature that will produce copies o[...]

www .aleratec.com 9 Using the DVD/CD Duplicator Main Menu: Compare Compare will perform a bit by bit comparison of the disc copies loaded on the input bin to the source disc. 1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Compare” function. 2. Press ENTER ( ) to begin compare. 3. Load the disc to be checked. 4. Use the ESCAPE ( ) ke[...]

www .aleratec.com 10 Using the DVD/CD Duplicator Main Menu: Image - continued Image Load “Image Load” will copy an image of a source disc loaded in the input bin to a chosen hard drive partition. 1. Press ENTER ( ) key to enter the subfunction menu. 2. Press ENTER ( ) and use the LEFT/RIGHT arrow keys ( ) to select the partition location. If th[...]

www .aleratec.com 1 1 Using the DVD/CD Duplicator 4. Press ENTER ( ) and select the partition to be compared. 5. Press ENTER ( ) to start. 6. Use the ESCAPE ( ) key to return to the Main Menu. Image Burn This function will select the source image from the hard drive and burn the desired number of copies. 1. Press the LEFT/RIGHT arrow keys ( ) to na[...]

www .aleratec.com 12 Using the DVD/CD Duplicator Main Menu: Image - continued Image Delete Using this function you can select a partition to be deleted from the hard drive. 1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Image” function. 2. Press ENTER ( ) key to enter the subfunction menu. 3. Press the LEFT/RIGHT arrow keys ( ) to n[...]

www .aleratec.com 13 Using the DVD/CD Duplicator Main Menu: USB Mode The “USB mode” activates the connection from the DVD/CD RoboRacer SA built in hard disk drive to a PC. 1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “USB Mode” function. 2. Press ENTER ( ) and the system will ask you if you want to enter the “USB mode”. 3. [...]

www .aleratec.com 14 Using the DVD/CD Duplicator Main Menu: USB Mode First install the Image Manager software included on the Software/User Guide CD. Using Image Manager 1. Once the Image Manager software is installed, put the RoboRacer SA into USB Mode and connect the device to your PC. 2. After W indows has nished registering the device you wi[...]

www .aleratec.com 15 Using the DVD/CD Duplicator 6. Click on the table row to choose which partition you will load the image onto. The row selected will be highlighted in blue. The letter you see in the Index column is the same as the letter used to locate the image when you return the duplicator back to stand alone mode (USB Mode off). a. Click th[...]

www .aleratec.com 16 Using the DVD/CD Duplicator Main Menu: USB Mode Using Image Manager - continued 8. Once you click Open you will see the Information screen appear . Click the OK button to begin loading the disc image. 9. The Manage Images screen will appear and display the status of the image load. The screen will then disappear when the transf[...]

www .aleratec.com 17 Using the DVD/CD Duplicator 1 1. If you would like to edit the image information so that you can easily nd the image, select the “Edit T itle” button at the top of the Manage Images screen to add a description to the selected image le. 12. If you would like to export the image les on the duplicator ’ s HDD onto t[...]

www .aleratec.com 18 Using the DVD/CD Duplicator T roubleshooting Image Manager 1. If the Image manager is not starting and the screen displays this Error message, please make sure that the duplicator is in USB Mode. The duplicator ’ s screen will display as “Leave USB Mode, Press ESC Key” while it is in USB Mode. 2. T o make sure the duplica[...]

www .aleratec.com 19 Using the DVD/CD Duplicator Main Menu: Setup 1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Setup” function. The Setup function has 13 subfunctions. These are: *The “Setup” subfunction “Reset Robot” has four additional subfunctions. Copy Mode Over Burn Mode Read Error Skip Auto V erify CD Burn Speed DVD [...]

www .aleratec.com 20 Using the DVD/CD Duplicator Main Menu: Setup - continued Copy Mode 1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Setup” function. 2. Press ENTER ( ) key to enter the subfunction menu “Copy Mode”. 3. Press the ENTER ( ) key to navigate to the rst option “DAO” (Disc at Once). 4. Press the LEFT/RIGHT ar[...]

www .aleratec.com 21 Using the DVD/CD Duplicator 4. Press the LEFT/RIGHT arrow keys ( ) to navigate to the second option “Enable”. 5. Press ENTER ( ) to select the option you are viewing. The current option selected will be denoted with an “*”. 6. Use the ESCAPE ( ) key to return to the Main Menu. Read Error Skip If the source disc is damag[...]

www .aleratec.com 22 Using the DVD/CD Duplicator Main Menu: Setup - continued Auto V erify The “Auto V erify” function will test a disc for its readability in a ROM drive. This is not the same as “Compare”. Enabling “Auto V erify” will perform “V erify” on all disc copies loaded in the input bin. 1. Press the LEFT/RIGHT arrow keys ([...]

www .aleratec.com 23 Using the DVD/CD Duplicator 3. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “CD burn speed”. 4. Press the ENTER ( ) key to navigate to the rst option “Maximum*”. 5. Press the LEFT/RIGHT arrow keys ( ) to navigate to the other burn speed increment options. 6. Press ENTER ( ) to select the speed you are viewi[...]

www .aleratec.com 24 Using the DVD/CD Duplicator Main Menu: Setup - continued Default Reload Selecting “Y es” will return all settings to the factory default. 1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Setup” function. 2. Press ENTER ( ) key to enter the subfunction menu. 3. Press the LEFT/RIGHT arrow keys ( ) to navigate to[...]

www .aleratec.com 25 Using the DVD/CD Duplicator 4. Press the ENTER ( ) key to format the hard disc. 5. Use the ESCAPE ( ) key to return to the Main Menu. T est Mode Set In test mode the duplicator will simulate burning but will not actually write data to the disc. 1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Setup” function. 2. P[...]

www .aleratec.com 26 Using the DVD/CD Duplicator Main Menu: Setup - continued System Sound This function turns the button sounds ON or OFF . 1. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Setup” function. 2. Press ENTER ( ) key to enter the subfunction menu. 3. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “System Sound?[...]

www .aleratec.com 27 Using the DVD/CD Duplicator 3. Press the LEFT/RIGHT arrow keys ( ) to navigate to the “Erase Disc” function. 4. Press the ENTER ( ) key to navigate to the rst option “Full*”. 5. Press the LEFT/RIGHT arrow keys ( ) to navigate to the other option “Quick”. 6. Press ENTER ( ) to select the option you are viewing. Th[...]

www .aleratec.com 28 Using the DVD/CD Duplicator Main Menu: Setup - continued 6. Press ENTER ( ) to lower the pointer to the output disc position. This option may be helpful for tech support. 7. Press ENTER ( ) to lower the pointer to the reject disc position. This option may be helpful for tech support. Demo Run This function activates a demo mode[...]

www .aleratec.com 29 Using the DVD/CD Duplicator Nero Essentials Installation 1. Insert the Nero 7 Essentials CD into your PC. If Autoplay is enabled on your computer , you will automatically be taken to the Nero Essentials installer menu. If Autoplay is not enabled, navigate to your PC’ s optical disc drive in My Computer , and either double-cli[...]

www .aleratec.com 30 Using the DVD/CD Duplicator Creating an Image with Nero 1. Start the Nero Express Essentials program. 2. The screen below will be displayed. For this example choose “Data” and “Data CD”. [...]

www .aleratec.com 31 Using the DVD/CD Duplicator Creating an Image with Nero - continued 3. Add any data le by using the “Add” option or by dragging and dropping a le or les into the large white area. When nished adding les, click the “Next” button. 4. In the nal display before creating an image, make sure that “Image Re[...]

www .aleratec.com 32 Using the DVD/CD Duplicator 5. After the burn button is pressed, the “Save Image File” screen will appear . In the lowest dropdown menu called “Save as type:” select “ISO Image Files (.iso)”. Nero NRG les are not supported. T ype in the name you would like the image le to be called. T ake note or choose where [...]

www .aleratec.com 33 Using the DVD/CD Duplicator Creating an Image with Nero - continued 7. The image process is successful when Nero displays this screen.[...]

www .aleratec.com 34 Specifications Supported Media T ypes • DVD-R/R W • DVD+R/R W (Single Layer) • DVD+R DL/DVD-R DL (Dual Layer) • CD-R • CD-R W Supported Formats • Most Industry Standard DVD and CD Formats Recording Modes • Disk-at-Once • Track-at-Once Copy Speeds • Selectable Power Requirements • 100-240 V AC (Universal Pow[...]

www .aleratec.com 35 T echnical Support After reading this User Guide, if you need additional assistance with this product, please contact Aleratec T echnical Support. Our technical staff will be happy to assist you, but they may need your help to better assist you. Calling Aleratec T echnical Support without all the necessary information can be bo[...]

www .aleratec.com 36 Service and Support Aleratec, Inc., Limited W arranty This Limited W arranty covers defects encountered in the course of normal use of this product and does not apply to damage from improper use, abuse, accidents, unauthorized service, or inadequate packaging when shipping the product to Aleratec, Inc. Aleratec, Inc. provides t[...]

www .aleratec.com 37 Service and Support Please Note: This W arranty is valid only within the United States and Puerto Rico, and applies only to products that are new and unopened on the date of purchase. For areas outside the United States and Puerto Rico, contact the authorized dealer from whom you purchased this product to determine which warran[...]

www .aleratec.com 38 Service and Support T o Obtain W arranty Service: Y ou must ship your subsystem to the authorized dealer where your subsystem was purchased within the one year warranty period and no later than thirty days after discovery of claimed defect, whichever occurs rst. In either case, you must provide proof of original purchase bef[...]

www .aleratec.com 39 T echnical Support F AX Back Form Aleratec, Inc. T echnical Support Fax Back Form Please record the following information to help expedite any warranty claim: Model No.: _____________ Serial No.: ____________________________ Date Purchased ________________________________________________ Place of Purchase: _____________________[...]

Document Number: 9399062 _ENG_Rev . K Copyright © 2011 Specifications subject to change without notice. Aleratec, Inc. 9851 Owensmouth Avenue Chatsworth, CA 91311 U.S.A. www .aleratec.com[...]