Alliance Laundry Systems DRY684C manuale d’uso

Installation/Operation www .comlaundry .com Clothes Dryer Electric and Gas Models DRY684C Part No. 513220R4 August 2011 Keep These Instructions for Futur e Reference. (If this machine changes ownership, th is manual must accompany machine.)[...]

[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 513220 1 IMPOR T ANT : Pur chaser must consu lt the local gas suppl ie r for su ggested instruction s to be followed if the dryer user smells gas. The gas utility instructions plus the SAFETY and W ARNING note directly above must be posted in a pr ominent location near the dry[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT © Copyright 201 1, Alliance Laundry Systems LLC All rights reserved. No part of the cont ents of this book may be reproduced or transmitted in any form or by any means without the expressed writte n consent of the publisher . 513220 2 T able of Content s Safety Information ..[...]

3 513220 © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Safety Information Explanation of Safety Messages Throughout this manual and on machine decals, you will find precautionary statements (“DANGER,” “W ARNING ,” and “CAUTION”) followed by spec ific instructions. These precautions are intended for the persona[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Safety Informati on 513220 4 13. Keep area around th e exhaust opening and adjacent surrounding area free from the accumulation of lint, dust and dirt. 14. The interior of the dryer and the exhaust duct should be cleaned peri odically by qualified service personnel. 15. If not[...]

5 513220 © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation Dimensions NOTE: Side, re ar and bottom exhaust openings are 4 inch (10.2 cm) ducting. Gas models cannot be vented ou t left side o f cabinet because of burner housing. IMPOR T ANT : The dryer should have sufficient clearance around it for n eeded ventil[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 513220 6 Additional Security T orx security screws are ava ilable (as optional equipment at extra cost) for securing lower access panel to dryer base. Order part number 62853. A T orx bit, part number 282P4, is available (as optional equipment at extra cost) for [...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 7 513220 Before Y ou St art T ools For most installations, the basic tools you will need are: Figure 1 NOTE: An 8 in. (20.32 cm) coin drawer is requir ed for coin drop operated models. Inst alling the Dryer Step 1: Position and Level the Dryer Install dryer befor[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 513220 8 Figure 3 D817I * NOTE: For new installations, locate top of w all vent 42 in ches (107 cm) above floo r to make venting easier to connect. 1 Outer wall of enclosure B A A C *42" (107 cm) D A E 1 FRONT VIEW (w/o Closet Do or) Area Description Free St[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 9 513220 Step 2: Connect Dryer Exhaust System IMPOR T ANT : Installing in-line filters or lint collectors will cause incr eased static pr essure. Failure to maintain the secondary lint system will decrease dryer efficiency and may void machine warranty . • DO N[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 513220 10 • Stat ic pressure in exhaust duct should not be greater than .6 inches water column (1.5 cm), measured with manometer pl aced on exhaust duct two feet (61 cm) from dryer (check with dryer running and no load). In multi-dryer installations, all dryers[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 11 513220 Exhaust System For best drying results, reco mmended maximum length of exhaust system is shown in Ta b l e 1 . T o prevent backdraft when dr yer is not in operation, outer end of exhaust pipe must ha ve a weather hood with hinged dampers (obtain locally[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 513220 12 Multi-Dryer Inst allation Exhaust Requirement s Figur e 5 shows a typical example of a multiple dryer installation. Note how each dryer has its own ex haust system vented to the central exhaust duct. Figure 5 DRY19 67N 1 58786 Backdraft Damper (Availabl[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 13 513220 Figure 6 Figure 7 D686I 1 NOTE: Where the exhaust duct pierces a combustible wall or ceilin g, the opening must be sized per local codes. 3 2 in. (5 cm) Minimum or Cl earance per Local Codes 4 No Screen or Cap 2 Wa l l 5 Clean Out Cover – Inspect Mont[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 513220 14 A Backdraft Damper , Part No. 58786 (obtain locally), should be installed in a 4 inch (10.2 cm) diameter VER TICAL duct system. This will prevent a backdraft when dryer is not in use, and will keep th e exhaust air in balance within the central exhaust [...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 15 513220 NOTE: When connecting to a gas line, an equipment shut-off valve must be installed within 6 feet (1.8 m) of the dryer . An 1/8 in. NPT pipe plug must be installed as shown for checking inlet pressur e. Refer to Figure 8 . 4. T ighten all connectio ns se[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 513220 16 Grounding Information This appliance must be grounded. In the event of malfunction or breakd own, grounding will red uce the risk of electric shock by providing a path of least resistance for electric current. The cord-kit must be equipped with a cord h[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 17 513220 IMPOR T ANT : Use only a new U.L. listed No. 10 (copper wire only) three or four conductor power supply cord kit rated 240 V olts (minimum) 30 Amperes and labeled as suitable for use in a clothes dryer . Figure 9 D275I D006I 1 T ypical Receptacle 2 Powe[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 513220 18 Connecting Power Cord with Three-Wire Plug NOTE: Four -wire cord is re quir ed for new branch- circuit in stallations, mobi le homes or where codes do not permit groundin g th rough neutral. Figure 1 1 1. Disconnect power to dry er . 2. Remove access co[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 19 513220 4. Use the three screws from the accessories bag to attach the power cord wir es to the terminal block. Refer to Figur e 14 . Figure 14 5. T ighten all screws firmly . IMPOR T ANT : Failur e to tighten these scre ws firmly may result in wir e failure at[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 513220 20 3. Remove ground screw and save for use in Step 5. Remove wire and use in Step 6. Figure 17 4. Use a strain relief and insert end of power cord through power suppl y hole. Figure 18 5. Attach power cord ground (green) wire to rear bulkhead using g round[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 21 513220 Step 5: Reverse Door , if Desired NOTE: Doors with windows cannot be reversed. The door on this dry er is completely reversible. T o reverse door proceed as follows: 1. Remove four hing e attaching screws. 2. Remove all nine screws. 3. Pull bottom of do[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 513220 22 8. Using screwdriver , remove two door plugs, and reinstall on opposite side of door opening. 9. Reinstall four hinge atta ching screws, removed in Ste p 1 . Step 6: W ipe Out Inside of Dryer Before using dryer for the fi rst time, use an all-purpose cl[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 23 513220 The dryer is design ed to be operated on a separate branch, polarized, three-wire, ef fectively grounded, 120 V olt, 60 Hertz, AC (alternating current) circuit protected by a 15 Ampere fuse , equivalent fusetron or circuit breaker . The three-prong gro [...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Inst allation 513220 24 Gas Dryers IMPOR T ANT : This operation is to be conducted by qualified personnel only . T o view the burner flame, remove the lower front panel of the d ryer . Close the loading door , start the dryer in a heat setting (refer to the Operation section).[...]

25 513220 © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Operation Operation Instructions IMPOR T ANT : Before using dryer for the first time, use an all-purpose cleaner , or a detergent and water solution, and a damp cloth to remove shipping dust fr om inside of dryer drum. IMPOR T ANT : Remove all sharp objects from laun[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Operation 513220 26 Step 4: Set Fabric Selector Select HIGH TEMP , MED TEMP , LOW TEMP , DELICA TES, or NO HEA T by pu shing touchp ad . Figure 36 NOTE: Always follow manufactur er ’ s care lab el instructions. Step 5: Insert Coin(s) or Card T o Insert Money Insert coin(s) i[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Operation 27 513220 Indicator Light s INSER T COINS/CARD INSERT COINS/CARD is lit to prompt the user to insert coins or a card to sa tisfy the vend price. When INSERT COINS/CARD is lit, the three digits will display the vend price remaining to be satisfied. ST AR T ST ART is l[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 28 513220 Maintenance Lubrication All moving parts are sealed in a permanent supply of lubricant or are equipped with oilless bearings. Additional lubrication will not be necessary . Care of Y our Dryer Dryer Interior W ipe the surfaces using a soft cloth and household cleaner[...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Maintenance 29 513220 Motor Overload Protector The dryer ’ s motor overload protector stops the motor automatically in the event of an overload. After cooling, the overload protector will reset itself. Dryer can be restarted by pressing the PUSH-TO-ST AR T button or ST AR T [...]

© Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT 30 513220 T roubleshooting T ry th es e troubleshooting tips befo re making a service call. They may save you time and mone y . Dryer Symptom Possible Cause/Solution Dryer won’t start • Insert coin(s ) or card. • For dryers equipped with a power cord, make sure the power[...]

31 513220 © Copyright, Alliance Laundry System s LLC – D O NOT COPY or TRANSMIT Cont act Information If service is required, contact the nearest Factory Authorized Ser vic e Cen t er . If you are unable to locate an authorized service center or are unsatisfied with the service performed on your dryer , contact: Alliance Laundry Systems Shepard S[...]

[...]

[...]

Inst aller Checklist Fast T rack for Inst alling the Dryer (Refer to the ma nual for more det ailed information) LEVEL D255I • Position and Level the Dryer. 1 D256I CHECK D259I D255I 2 CHECK • Connect Dryer Exhaust System. D740I D740I 3 GAS ONL Y D258I CHECK • Connect Gas Supply Pipe. • Check for Gas Leaks . 4 D699I W315IE0A ELECTRIC ONL Y [...]