Alliance Laundry Systems FLW1527C manuale d’uso

Installation/Operation www .comlaundry .com Frontload W ashers Metered Commercial FLW1527 C Part No. 803447R1 January 2010 Keep These Instructions for Futur e Reference. (If this machine changes ownership, th is manual must accompany machine.)[...]

[...]

803447 1 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT NOTE: The W ARNING and IMPOR T ANT instructions appe aring in this manual ar e n ot meant to co ver all possible conditions and situations that may occur . It must be understood that common sense, caution, and carefulness ar e factors which cannot be built into these [...]

© Copyright 2010, Alliance Laundry Systems LLC All rights reserved. No part of the cont ents of this book may be reproduced or transmitted in any form or by any means without the expressed writte n consent of the publisher . 2 803447 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT T able of Content s Safety Information ...[...]

3 803447 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Safety Information Explanation of Safety Messages Throughout this manual and on machine decals, you will find precautionary statements (“DANGER,” “W ARNING ,” and “CAUTION”) follow ed by specific instructions. These precautions are intended for the persona[...]

Safety Informati on 803447 4 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT 1 1. Do not repair or replace any part of the washer , or attempt any servicing unless specifically recommended in the user-maintenance instructions or in published user -repair instructions that you understand and have the skills to carry out. 12.[...]

5 803447 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Inst allation Dimensions and Specifications FL W2192N FL W2192N 5.1 cm (2 in.) 1 10.7 cm (43.6 in.) 75.1 cm (29.6 in.) 71.1 cm (28 i n.) 61.0 cm (24 in.) 68.3 cm (26.9 in.) 79 cm (31.1 i n.) 5.1 cm (2 in.) 93.83 cm (36.94 in.) 37.08 cm (14.6 in.) 33.3 cm (13.1 in.) 3.[...]

Inst allation 803447 6 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Before Y ou St art T ools For most installations, the basic tools you will need are: Figure 1 NOTE: A 20.32 cm (8 in.) coin drawer is r equired for coin ope rated models. NOTE: If the washer i s deliver e d on a cold day (below freezing), or is stor e d [...]

Inst allation 7 803447 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Inst alling the W asher Step 1: Position W asher Near Inst allation Area Move washer so that it is within 1.2 meters (4 feet) of the desired area of installation. NOTE: For best performance and to minimize vibration or movement, install washer on a solid[...]

Inst allation 803447 8 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT T urn on the water supply fauc ets and flush the lines for approximately two minutes to remove any foreign materials that could clog the screens in the water mixing valve. NOTE: When installing in newly constructed or renovated b uilding, it is very impo[...]

Inst allation 9 803447 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Risers Risers (or air cushions) may have to be installed if the pipes knock or pound when flow of water stops. Th e risers are more efficient when installed as close as possible to the water supply faucets (refer to Figur e 6 ). Figure 6 Step 3: Connect [...]

Inst allation 803447 10 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Step 4: Position a nd Level the Washer Position washer so it has suf ficient clearance for installation and servicing. NOTE: Use of the dispenser drawer or washer door as a handle in the transportation of the washer may cause damage to the dispenser or [...]

Inst allation 11 803447 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Step 5: Remove the Shock Sleeves and Shipping Brace Remove front acce ss panel by removing the two screws at the bottom of the panel. Remove the five bolts an d lockwashers from shipping brace with a wrench and remove brace. Refer to Figur e 10 . Four b[...]

Inst allation 803447 12 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Step 7: Connect the W asher to Electrical Power Electrical Requirements NOTE: The wiring diagram is located in the control cabinet. NOTE: Refer to th e washer na meplate on the rear cabinet panel for proper voltage and Hertz the washer is designed to op[...]

Inst allation 13 803447 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT 240 V olt, 50 Hertz with 3-Prong Earthing Plug The washer is des igned to be operated on a s eparate branch, polarized, three-wi re, effectively earthed, 240 V olt, 50 Hertz, AC (alternating current) circuit protected by a 15 ampere fuse , equivalent fu[...]

Inst allation 803447 14 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Connecting to Central Pay System IMPOR T ANT : Any central pay device and related installation wiring that is connected to the washer must maintain the Electromagnetic Compatibility (EMC) of the washer in order to comply with the approp riate national E[...]

15 803447 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Operation Operation Instructions IMPOR T ANT : Prior to first wash, use an all- purpose cl eaner , or a detergen t an d water solution, and a damp cloth to remove shipping dust from inside of washtub. IMPOR T ANT : Remove all sharp objects from laundry to avoid tears[...]

Operation 803447 16 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Step 3: Add Laundry Supplies Open dispenser drawer . Meas ure and add low sudsing, high efficiency (HE) deter gent (1), bleach (2) and fabric softener (3) to the dispenser drawer (refer to Figur e 17 ). Close dispenser drawer . IMPOR T ANT : If using non-HE[...]

Operation 17 803447 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Step 6: S tart W asher After vend price has been satisfie d, pu sh the ST ART pad. DOOR MUST BE CLOSED TO ST AR T WA S H E R . Figure 20 Indicator Light s WA S H WA S H is lit at the beginning of a wash cycle and will remain lit until the wash cycle is comp[...]

803447 18 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Maintenance User-Maintenance Instructions Lubrication All moving parts are sealed in a permanent supply of lubricant or are equipped with oilless bearings. Additional lubrication will not be necessary . Do not lubricate the door hinge. If the hinge makes noise, repla[...]

Maintenance 19 803447 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Reinst allation of Shipping Materials T o prevent damage while moving the washer , the shipping materials MUST be reinstalled. • Disconnect washer from electrical supply . • While supporting the fro nt access panel, remove two screws from the bottom e[...]

803447 20 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT T roubleshooting T ry th es e troubleshooting tips befo re making a service call. They may save you time and mone y . W asher Symptom Possible Cause/Solution Won’t Fill • Make sure washer is connected to electrical power . • Make sure hot and cold water faucets[...]

T roubleshooting 21 803447 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT W asher Symptom Possible Cause/Solution Vibr ates/Moves Slightly • Make sure washer is level. Uneven leveling can cause vibration. • Make sure washer is installed o n a solid, sturdy and level floor . The washer should n ot be installed on carpet[...]

803447 22 © Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Cont act Information If service is required, contact the nearest Factory Authorized Ser vice Center . If you are unable to locate an authorized service center or are unsatisfied with the service performed on your unit, contact: Alliance Laundry Systems Shepard S tr e[...]

[...]

© Copyright, Alliance Laundr y Systems LLC – DO NOT COPY or T RANSMIT Inst aller Checklist Fast T rack for Inst alling the W asher (Refer to the ma nual for more det ailed information) • Position Washer Near Installa tion Area. 1 CHECK H054IE0A H054IE0A 2 CHECK • Connect Fill Hoses. TLW1976N HOT COLD TL W1976N 3 CHECK • Connect Drain Hose [...]