Allied Telesis CG-WLBARGS manuale d’uso

U ser Manual W i r e l e s s 1 0 8 M B r o a d b a n d R o u t e r CG-WLBARGS[...]

[...]

WLBARGS Manual PB 1 1. Product Introduction 1.1 Package Contents ................................................................................... 3 1.2 F eatures ..................................................................................................... 3 1.3 Hard ware Introduction ......................................................[...]

WLBARGS Manual 2 3 2 3 2 3 <W AN setting (internet)> ...................................................... 30 <W AN setting/ Dynamic DNS> ........................................... 33 <W AN setting/O ther setting> ............................................. 34 <LAN setting/LAN IP> ........................................[...]

2 3 2 3 WLBARGS Manual 2 3 corega ‘ s WLBARGS is an adv anced model of broadband Router as well as an IEEE802.11g wireless access point which can speeds up to 108Mbps . I ts management interface is straightforward for ease in setting up , while it sup- ports various securit y fea tures to effectively pre vent hackers from attacking your networks,[...]

WLBARGS Manual 4 5 4 5 4 5 1.3 Hardware In troduc tion 2 3 1 4 5 F ront 9 8 6 7 1 0 Back AP R ou ter 11 Bottom 1. Power LED (Gr een) Indicate power sta tus 2.Status LED (Red) ON:Reboot/Hung up/FirmW are upgrade 3. W AN LED (Green) ON: Connected Blink:T ransmitting or receiving data 4. Wireless LED (Gr een) ON: Wireless function enable Blink:T ransm[...]

4 5 4 5 WLBARGS Manual 4 5 2.1 WLBARGS should be connecting to PC and modem F ollowing the steps below to set up WLBARGS and the connection. (1) Insert the cable connec tor into the Netw ork Adapter embeded in PC, and insert the other side into one of LAN por ts (1~4) of the Router . (2) Insert the connec t into the W AN por t of the Router and ins[...]

WLBARGS Manual 6 7 6 7 6 7 3.1 TCP/IP C onfiguration The following st eps and screenshots maybe dissimilar in diff erent operat- ing systems. This manual takes Windows XP/200, 95/98/ME, and M ac O/S as examples: 3.1.1 Window s XP O/S (1) Enter [Contr ol Panel] -> click [Network Connection] -> right click and select [Open]. (2) Click [Local Ar[...]

6 7 6 7 WLBARGS Manual 6 7 (3) Click [General] -> click [Internet Pr otocol ( TCP/IP), and click [Properties]. (4) Click [General], select [Obtaining an IP Address Aut omatically], and [O btain DNS Ser ver address aut omatically], and press [Advance].[...]

WLBARGS Manual 8 9 8 9 (5) Click [DNS] tab , unselect [Register this connec tion ’ s address in DNS], and press [OK]. (6) Go back to [Internet Pr otocol TCP/IP] and press [OK]. (7) Press [OK] t o close [Local Area C onnection Properties]. 3.1.2 Window s 2000 O/S (1) Go to [My Computer], and enter [Control P anel], click open [Network and Dial Up [...]

8 9 WLBARGS Manual 8 9 (2) Right click [Local Area C onnection], and select [Properties] * Note: Please check if TCP/IP had been installed in the [Local Ar ea Connection]. If not, consult [Add TCP/IP] steps in this chapter . (3) Click [Internet protocol ( TCP/IP)] and click [P roper ties].[...]

WLBARGS Manual 10 11 10 11 (4) Select [Obtain an IP address automatically], and [Obtain DNS server address automatically]. And click [Advance]. (5) Click [DNS] tab in [Adv ance TCP/IP setting] page , and unselect [Register this connection’ s DNS address , and press [OK].[...]

10 11 WLBARGS Manual 10 11 3.1.3 Window s 98/95/ME O/S The configurations in all Windows 98/95/ME are the same , and this manual takes Windows 98 as an example. (1) Enter [Con trol P anel], and double click [Net work]. (2) Click [Configuration] tab , and selec t [ TCP/IP], click [Properties]. (3) Select [IP Address], and selec t [Obtain IP address[...]

WLBARGS Manual 12 13 12 13 (4) Click [Gateway] tab , remove all the gatewa ys, and press [OK] to close the window . (5) Go to [Network] and press [OK] to close the page. (6) The [Restar t the windows] screen will pop-up , press [OK] to restart the PC. If the PC is not shown this message, restart the PC manually . 3.1.4 Mac OS 8.x~9.x O/S (1) Open t[...]

12 13 WLBARGS Manual 12 13 3.2 Brow ser Configur ation 3.2.1 Window s O/S The following e xamples are for Windows XP O/S, skip this chapter if you are using Windows 200/98/ME. (1) Open Internet Explorer (IE 6.0), selec t [ T ools] menu and click [Internet Options]. If a [Dial-up Connection] window is pop-up , close it, and do not connect to the Int[...]

WLBARGS Manual 14 15 14 15 14 15 (3) Unselect all three options in the [Local Area Network LAN Setting]. (4) Press [OK] in the [Int er net Options]. 3.2.2 Mac O/S (1) Open Internet Explorer (IE 5.0) Go to [Edit] in the menu bar , select [Internet Explorer Pr eferences]. (2) Select [Proxies] options in [Network] on the left-side configuration it em[...]

14 15 14 15 WLBARGS Manual 14 15 4.1 Quick Network C onfiguration Basic configuration is required bef ore connection your computer to the inter- net via WLBARGS. The connection methods may be differed b y your contract to the ISP . Please reconfirm your connection conditions with your ISP prior to configure this router . The configuration procedure[...]

WLBARGS Manual 16 17 16 17 (5) Please select your region. e.g.) Singapore . Click on [Save]. (6) Click [Quick Installation Setting], and click [Nex t] to enter the Setup Wizard. (7) When seeing this screen shot, click on [Next].[...]

16 17 WLBARGS Manual 16 17 (8) Select your connection type. Please make sure that your ADSL connection type is correct as you enter; the correct information can be obtained from the documents given by y our ISP . If not, consult with your ISP befor e setting. 4.1.1 Auto obtain IP (DHCP) (1) If you are subscribing to auto obtain IP service ( or DHCP[...]

WLBARGS Manual 18 19 18 19 (2) Press [Mac address clone] t o obtain the Ethernet card’ s M ac address. Then press [Next]. (3) Click on [Save] t o per form connection tests.[...]

18 19 WLBARGS Manual 18 19 (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the c onnec tion status. W hen [Connection ok] appears, click on [Close]. (5) Open the web browser (IE 6.0), and test with any websit e for testing the connection. * Note: if the connection to the website fails. Restar t[...]

WLBARGS Manual 20 21 20 21 (2) Configure the network setting pro vided by your ISP . Then click on [Ne xt]. (3) Click on [Save] t o per form connection tests.[...]

20 21 WLBARGS Manual 20 21 (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the c onnec tion status. W hen [Connection OK] appears, click on [Close]. (5) Open the web browser (IE 6.0), and test with any websit e for testing the connection. *Note: If the connection to the website fails. Please ma[...]

WLBARGS Manual 22 23 22 23 (2) Enter the username and password pro vided by your ISP , and click on [Next]. ＊ Note: If you are a Hinet subscriber , type @hinet.net following the 8-digit account number , for instance: xxxxxxxx@hinet.net. Be careful, username and password are sensitive to capitals. (3) Click on [Save] t o per form connection tests.[...]

22 23 WLBARGS Manual 22 23 (4) Within seconds, the result of the connection test will be appeared in the dialogue box to indicate the c onnec tion status. W hen [Connection OK] appears, click on [Close]. (5) Open the web browser (IE 6.0), and test with any websit e for testing the connection. *Note: If the connection to the website fails. Please ma[...]

WLBARGS Manual 24 25 24 25 Splitters Link to telephone Modem RJ-45 Power Adapter Hereunder is the setting on Centrino Notebook as an example , for wireless adapters in other brands, please refers to the original manuals. <Window s XP (SP1) O/S> (1) Go [Control P anel] -> double click on [Network connection] -> right click on [ W ireless[...]

24 25 WLBARGS Manual 24 25 (2) Go [Control P anel] - [Network connection] again -> click [ Wireless network connection] and hold right button to select [Av ailable wireless network connection], choose one av ailable network e.g. ) corega , and click [Connect]. (3) Connection status will appear in the bottom right of the screen. <Window s XP ([...]

WLBARGS Manual 26 27 26 27 26 27 (2) Go [Control P anel] - [Network connection] again -> click [ Wireless network connection] and hold Mouse’ s right button to select [Av ailable wireless network connection], e.g . ) corega , and click [Connect]. (3) Connection status will appear in the bottom right of the screen. *Note: The wireless connectio[...]

26 27 26 27 WLBARGS Manual 26 27 T o prevent fr om unlawful access to your network, you are recommended to perform wireless security setting. Enter the func tion menu, ad click on [802.11g/b Security setting] item. And select WEP or WP A setting. 5.1 WEP S etting In order to preven t your information from being hacked , it is recommended to use WEP[...]

WLBARGS Manual 28 29 28 29 (5) Recommended to keep default values of [DTIM] and [P reamble Mode]. (6) Save y our settings by [Apply]. (7) Par ameters can be output by [Output Info .] 5.2 WP A S etting WP A is encr ypted by a periodic update , mak ing it more difficult to be hacked. Home users and company users are rec ommended to use <WP A-PSK&[...]

28 29 WLBARGS Manual 28 29 (4) Recommended to keep default values of [DTIM]and [Rekey Interval]. (5) Press [Apply] t o save setting . (6) Par ameters can be output by [Output Info]. <WP A-EAP> (1) S elect [ WP A2-EAP] or [ WP A/WP A2-EAP](Recommended). in the column of [Authentication] a. [ WP A2-EAP]: The 2nd gener ation encryption sk ill pe[...]

WLBARGS Manual 30 31 30 31 30 31 The chapter will briefly introduce all functions of this product, and spell them out. Log in the management program and the below interface will appear . 6.1 Fea tures <Mode> Wireless F unc tion Wireless Enable: enable the wireless func tion. Wireless Disable: disable the wireless func tion. <W AN setting ([...]

30 31 30 31 WLBARGS Manual 30 31 A. For aut o obtain IP (DHCP): T ype Press [MA C clone] to obtain the Ethernet card's Mac address. Domain name Please refer t o your ISP internet service information, add/edit [Domain name]. Computer name Please refer t o your ISP internet service information, add/edit [Computer name]. MTU value Maxi mum T rans[...]

WLBARGS Manual 32 33 32 33 Username Please enter username , given by y our ISP . Passw ord Please enter passwor d, given by your ISP . Confirm password Please type your password again. Connection type [Auto Reconnect]: always on line (recommended). [On Demand]: connect when accessing to Internet. [manual connection]: manually connecting to interne[...]

32 33 WLBARGS Manual 32 33 W AN ip address Please refer t o your ISP internet service information. Subnet mask Default gateway MTU Maxi mum T rans missio n Unit . Deafault setting :1500 Byte. DNS server When [Manual Connection] is enable, two DNS server addresses can be inser ted: DNS1 and DNS2 <W AN setting/ Dynamic DNS> Dynamic DNS is a con[...]

WLBARGS Manual 34 35 34 35 (1) select available dynamic DNS services. (2) enter username for dynamic DNS. (3) enter passwod f or dynamic DNS. (4) enter domain name. (5) IP update interval. (6) Click [Apply]. <W AN setting/Other setting> Direct PPPoE PPPoE pass-thr ough function enable/disable. VPN pass through VPN pass-through function enable[...]

34 35 WLBARGS Manual 34 35 <LAN setting /DHCP server> (1) Select [Enable] to enable DHCP ser ver function. Default is [enable]. (2) Enter DHCP servers star t ip and end ip . (3) Then click on save button to sa ve the setting. <LAN setting/PC database> the following table displa y the current connected users information, you can add/edit[...]

WLBARGS Manual 36 37 36 37 (1) Enter the pc name and select network connection type. (2) Configure the mac address da ta. (3) Click [Add PC Data] to c omplete the setting. <Wireless setting/802.11g/b setting> ESSID Default ESSID is [corega]. Mode . 802.11b/g: auto connect in either 802.11b or 802.11g. . 802.11g: connect in 802.11g (54Mbps) m[...]

36 37 WLBARGS Manual 36 37 <Wireless setting/A ccess control> Wireless to wireless communication Configure wireless c ommunication between clients. [Enable]/[Disable]: enable or disable wireless communication between clients. Wireless to wire communication Configure wireless and wir ed communication between clients. [Enable]/[Disable]: enab[...]

WLBARGS Manual 38 39 38 39 (3) S elect one of protocol. (4) Enter the range of limited por t number . (5) S elect one of the time schedule limitations. (6) After clicking on [ Time Setting] button, a time schedule table is shown, once complete the setting , please click on [save] button to stor e the information. <Security setting/filter list&g[...]

38 39 WLBARGS Manual 38 39 <Adv anced setting/virtual ser v er> Vir tual server is an appointed port opened by the PC in connection with the product, allowing other users connecting up via W AN. Open ser vers or special online games can take advantage of this function. S etting processes ar e as follows: (1) S elect a PC to be the virtual ser[...]

WLBARGS Manual 40 41 40 41 *Note: 1. The PC becomes vulnerable to being hacked if DMZ function star ts. Please only use it in need. 2. The PC with DMZ function needs a fixed IP address. 3. DMZ function can only be used in one PC. <Advanc ed setting/UPnP setting> Activating this function can detect the device or software of LAN, supporting UP[...]

40 41 WLBARGS Manual 40 41 Admin login name User name for login this management progr am. Default setting is [root] . Admin login password Default password is empty . Passw ord comfirmation Please retype password . Connection Timeout Enter connection time-out time. Time setup The default value is [A uto Setup]. Back to default setting Click [Proce[...]

WLBARGS Manual 42 43 42 43 *Remote contr ol The setting allows accessing the management pr ogram via remote control. The activation processes ar e as follows: (1) S elect [Enable]. (2) Indic ate 1 ~ 9600 f or parameters of por t range. e.g . ) 8080 (Recommended keeping default values). (3) Click on [Apply] af ter completing settings . e.g . ) Assum[...]

42 43 WLBARGS Manual 42 43 <Status> Connection status log is displayed in the table . <Status/Log Displa y/D os A ttack lo g> Dos attack log is displayed in a table . <Status/Log Displa y/DHCP log> DHCP server log is displayed in a table .[...]

WLBARGS Manual 44 45 44 45 <Status/Log Displa y/system log> System log is displa yed in the table. <Status/Log Displa y/E-mail func tion> An E-mail address can be set below . Special incidents will be recorded and sent to the appointed E-mail address . After entering all information, click [Save] to sa ve and complete the setting. 6.2 A[...]

44 45 WLBARGS Manual 44 45 <Adv anced Setting/Backup DNS> T wo DNS ser ver addresses can be set in the table . If the primar y DNS ser ver does not function, the system will use them as secondary addresses. <Adv anced Setting/Routing/Static Routing> Add/ Edit/ Delete static r outer can be set in the table. After key-in of static router [...]

WLBARGS Manual 46 47 PB 46 46 47 46 47 46 47 If you would like to use AP (Acc ess Point) function, please use the switch but- ton in the bottom of the product. T he operations are as the below: (1) Cut off the power . (2) Switch AP/Router to the left (AP side). A P R ou te r (3) Plug in the product. (4) Now the product is in AP mode. Open browser t[...]

46 47 46 47 PB 46 WLBARGS Manual 46 47 46 47 When the installation fails or the connection doesn ’t succeed, it’ s recom- mended to take the following actions against the problems. (1) Find y our problem in the troubleshooting collection. (2) Go to our official website at http://www .corega-asia.com, then click [Support] and click the [Online [...]

WLBARGS Manual 48 49 48 49 (9) Are the settings of your w eb browser correct? Q2. Not able to log in the management program. A: Y ou hav e 4 ways to check and solv e the problem: (1) Close and re-open the IE browser and login the pr ogram again. (2) Log out and re-login the Windows OS. Then login the pr ogram again. (3) Probably the management pr o[...]

48 49 WLBARGS Manual 48 49 <Window s Me/ 98/ 95> (1) Click [Start] => Click [Run]. (2) Input [winipcfg] in the column => press [Ent er]. (3) Select your network adapter to display IP address . The IP should be 192.168.1. x ,if none, please click [Release] => Click [Renew]. Q7. How to reboot the product? A: Reboot to get new setting v[...]

WLBARGS Manual 50 51 50 51 50 51 Compliance Standard WLAN: IEEE802.11/IEEE802.11b/IEEE802.11g LAN: IEEE802.3/IEEE802.3u/IEEE802.3x Interface 　 W AN: 10/100Mbps x 1 Port (RJ-45, Auto MDI/MDI-X) LAN: 10/100Mbps x 4 Ports (RJ-45, Auto MDI/MDI-X) Frequency Band 2.412~2.462 GHz T ransmission speed IEEE802.11b: 11/5.5/2/1Mbps IEEE802.11g: 54/48/36/24/1[...]

WLBARGS Manual corega 可瑞加科技於 1996 年成立於日本新橫濱，致力於提供多元化的家用 網路產品：包括乙太網路交換器、無線區域網路系列產品、路由器、藍芽 系列產品、以及與網路相關的產品應用及服務。 corega 目前已是日本專業 家用網路產品的暢銷品牌，並且於 2[...]

WLBARGS Manual F ederal C ommunic ation C ommission Inter ferenc e Statement This equipment has been tested and f ound to comply with the limits for a Class B digital device, pursuant to P ar t 15 of the FCC Rules. These limits are designed to provide reasonable prot ec tion against harmful interference in a residential instal- lation. T his equipm[...]

memo[...]

memo[...]

[...]

www .corega.com.tw PN : T30-UM8409-00 Rev .B www .corega-asia.com 7F ., No. 10, Lane 345, Y angGuang St. Nei-Hu Chiu, T aipei Cit y 114, T aiwan R.O .C. TE L: +8 86 -2 -8 75 1- 91 64 F AX : + 88 6- 2- 87 51 -9 17 4 corega T aiwan Inc.[...]