American Dryer Corp. MLG33 manuale d’uso

ML G33 Installa tion/Oper a tor Manual W ARNING: For your safety the information in this manual must be followed to minimize the risk of fire or explosion and to prevent property damage, personal injury or death. — Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. — WHA T TO DO IF[...]

“IMPORT ANT NOT E TO PUR CHASER” Information must be obtained from your local gas supplier on the instructions to be followed if the user smells gas. These instructions must be posted in a prominent location near the dryer . FOR Y OUR SAFETY Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other [...]

IMPORT ANT Y ou must disconnect and lockout the electric supply and the gas supply before any covers or guards are removed from the machine to allow access for cleaning, adjusting, installation, or testing of any equipment per OSHA standards. Please observe all safety precautions displayed on the equipment and/or specified in the installation manua[...]

4 Maytag Co. 1 13413 - 1 1 Safety Precautions ____________________ Warning For your safety , the information in this manual must be followed to minimize the risk of fire or explosion and to prevent property damage, personal injury , or loss of life. The dryer must never be operated with any of the back guards, outer tops, or service panels removed.[...]

1 13413 - 1 1 Maytag Co. 5 ! Warning T o reduce the risk of personal injury , inst all lockable doors to prevent public access to the rear of the dryers. Exhaust duct outlet should be checked periodically for blockages, and if any found, removed. Impor tant A means of restraint must be used to prevent straining of the gas supply when the appliance [...]

6 Maytag Co. 1 13413 - 1 1 MA XI MU M C A P A C I T Y ( DRY WEI GH T ) PER PO CKE T 30 l b 13. 61 kg T U M BL ER DI AM ET ER 3 0 ” 76. 20 cm T U M B L E R D E P T H 27” 68. 58 cm T UMBL E R V OLUME PER PO CKET 11 . 0 4 c u ft 312. 62 L TUM B L E R/D R I V E MO TOR PER PO CKET 1/4 h p 0.18 kW BLO WER / F A N M O T O R PER PO CKET 1/2 h p 0. 37 k[...]

1 13413 - 1 1 Maytag Co. 7 Specifications _______________________________________________________________________[...]

8 Maytag Co. 1 13413 - 1 1 ! Installation Procedures _______________ Installation should be performed by competent professional in accordance with local, state, and country codes. In the absence of these codes, the installation must conform to applicable American National S tandards: ANSI Z223.1-LA TEST EDITION (National Fuel Gas Code) or ANSI/NFP [...]

1 13413 - 1 1 Maytag Co. 9 F r esh Air Supply R equir ements _______ When the dryer is operating, it draws in room air , heats it, passes this air through the tumbler , and exhausts it out of the building. Therefore, the room air must be continually replenished from the outdoors. If the make-up air is inadequate, drying time and drying efficiency w[...]

10 Maytag Co. 1 13413 - 1 1 ! Outside Ductwork Protection T o protect the outside end of the horizontal ductwork from the weather , a 90° elbow bent downward should be inst alled where the exhaust exits the building. If the ductwork travels vertically up through the roof, it should be protected from the weather by using a 180° turn to point the o[...]

1 13413 - 1 1 Maytag Co. 11 Impor tant No more than 4 dryers should be connected to 1 main common duct. The illustration below shows the minimum cross-sectional area for multiple dryer round or square venting. These figures must be increased if the main duct run from the last dryer to where it exhausts to the outdoors is longer than 12 feet (3.656 [...]

12 Maytag Co. 1 13413 - 1 1 Gas Infor ma tion _______________________ It is your responsibility to have all plumbing connections, materials, and workmanship conform to local and state regulations or codes of the country of destination. In the absence of such codes, all plumbing connections, materials, and workmanship must conform to the applicable [...]

1 13413 - 1 1 Maytag Co. 13 ! ! ! ! ! Warning Fire or explosion could result due to failure of isolating or disconnecting the gas supply as noted. Note Undersized gas piping will result in ignition problems, slow drying, increased use of energy , and can create a safety hazard. The dryer must be connected to the type of heat/gas indicated on the da[...]

14 Maytag Co. 1 13413 - 1 1 G as Speci f i cati ons f or Non-CE A pproved Dr yers *** G as T ype and N o mina l H ea tin g Va l u e Suppl y Pressure ** Gro ss Heat I nput Or ific e S iz e ** Or ifice ( Inj ect or) Qua ntity Bur n er Pressur e Bt u/ f t 3 in WC B tu/h r kW DMS mm in WC N at u r al 1, 000 7. 0- 13.0 55, 000 16. 12 20 4. 089 13 . 0 * [...]

1 13413 - 1 1 Maytag Co. 15 Piping/Connections The dryer is provided with two 1/2” N.P .T . (3/8” B.S.P .T . for CE dryers) inlet pipe connections (1 for each tumbler) at the rear of the dryer . If a sep arate feed is provided for each tumbler from the main supply line (header), then a 1/2” (12.7 mm) line connection is sufficient. However , i[...]

16 Maytag Co. 1 13413 - 1 1 ! ! Unre gulated Gas V alve Regulate (govern) gas externally (refer to “Supply Pressure” in chart on page 14) to the correct gas pressure for the gas being used. Operate dryer through 1 complete cycle to ensure proper operation. ! Remove 2 burner tube mounting screws and remove burner tube in order to gain access to [...]

1 13413 - 1 1 Maytag Co. 17 ! Reinstall the burner tube onto the burner base. If converting from unregulated gas, use a flat screwdriver , remove the cap with blocking pin and install the regulator vent cap from the kit. Install the gas train back into the dryer gas train enclosure. Be sure the tab at the rear of the gas train engages into the moun[...]

18 Maytag Co. 1 13413 - 1 1 ! ! ! Preoper a tional Instr uctions __________ Impor tant For more detailed information regarding the microprocessor controller (computer), refer to the microprocessor user’s manual included with the dryer. Coin Models Microprocessor Controller (Computer) When the microprocessor controller (computer) is in the ready s[...]

1 13413 - 1 1 Maytag Co. 19 ! ! ! ! Note When ordering replacement parts from the Maytag distributor or the Maytag Co. be sure to give them the correct model number and serial number so that your parts order can be processed in an expeditious manner. Wa r ranty Infor ma tion _________________ War ranty For a copy of the manufacturer’s commercial [...]

20 Maytag Co. 1 13413 - 1 1 CE Label Data Label Infor ma tion _____________________________________________________________ Standard Label When contacting Maytag, the information on the data label is required to ensure proper service/parts assistance. The data labe l is located at the upper left rear of the dryer behind the back guard. 1. Model Num[...]

1 13413 - 1 1 Maytag Co. 21 NOTES _____________________________________________________________________________________ ____________________________________________________________________________________________ ____________________________________________________________________________________________ ____________________________________________[...]

Part No. 1 13413 1 1 - 01/15/09 - 10[...]