American Dynamics ADMNLCD20 manuale d’uso

Part Number 8200 - 0394 - 00 A 0 Please read this manual thoroughly before use, and keep it handy for future reference. 20 - INCH TFT - LCD MONITOR INSTRUCTION MANUAL AD MNLCD20[...]

WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. DO NOT INSERT ANY META LLIC OBJECT THROUGH VENTILATION GRILLS. CAUTION: CAUTION Explanation of Graphical Symbols Precautions Safety ----------------------------------------- Installation --------------------------- ------- -------- The lig htning [...]

- 2 - FCC COMPLIANCE STATEMENT THIS PRODUCT COMPLIES WITH VARIOUS OTHER REGIONAL AND SAFETY REGULATIONS SUCH AS: FCC , CE. THESE CERTIFICATIONS ARE NOTED ON THE PRODUCT LABEL. INFORMATION TO THE USER: THIS EQUIPMENT HAS BEEN TESTED AND FOUND TO COMPLY WITH THE LIMITS FOR A CLASS B DIGITAL DEVICE, PURSUANT TO PART 15 OF THE FCC RULES. THESE LIMITS A[...]

- 3 - IMPORTANT SAFEGUARDS 1. READ INSTRUCTIONS -- All the safety and operatin g instructions should be read before the appliance is operated. 2. RETAIN INSTRUCTIONS -- The safety and operating instruct ions should be retained for future reference. 3. CLEANING -- Unplug video monitor or equipment from the wall outlet before cleaning. Do not use liq[...]

- 4 - TABLE OF CONTENTS l Warning …………… .. …………………………………………………………………… 2 l FCC Compliance Statement ………………………………………………………… .. 3 l Important Safeguards ………………………………………………………………… .. 4 l Table Of Co[...]

- 5 - Feature s l 20 - inch LCD m onitor with m ultiple inputs (Composite video, Y/C (SVHS) and D - sub computer) l High b rightness of 500 cd/ ? l High c ontrast of 48 0 :1 l Wide v iewing a ngle of 160 degrees, both vertical ly and horizontal ly l Fast LCD r esponse t ime of 16ms , allowing excellent rendering of motion l Latching power supply au[...]

- 6 - Operating Instructions - Control 1. Power Monitor power ON / OFF. At OFF mode, monitor will be at standby status. Green Light – Power On Red Light – Standby mode 2. 3. Adjust / Increase or decrease the value on OSD menu. Increase value or turn ON / OFF function D ecrease value or turn ON / OFF function 4. Item Chose sub menu from Audio / [...]

Select input signal from AV1, AV2, S - Video or PC. - 7 - Backside Connections A. BACK PANEL CONTROL NOTE : Audio Conne ctions PC AV 1 AV 2 S-Video Audio 1 Audio 2 V V V V 16 17 18 1 , 2 AUDIO 2 IN (L, R) Stereo Audio Signal Input, this input is for AV2 or PC (refer to Note below) 3 , 4 AUDIO 2 OUT (L, R) Audio looping outputs for AUDIO 2 5 , 6 AUD[...]

- 8 - Remote Control Key Function Power T urn ON / OFF monitor. At OFF mode monitor will be standby status. Scan Provide CATV channel auto scanning. (Is there a TV tuner in this model?) Set (Restricted Channel S etting) Channel lock for restricted program. (Unlock / Lock channel must require password, default password: 0000). Sel. (Restricted Chann[...]

- 9 - Remote Control Jump Return to previous channel. Memory Channel m emory for TV/CATV. Select Selecting channel from memorized channels. ? Select channel forward. ? Select channel backward. Menu OSD menu ON / OFF and selection. Item Chose sub menu from Audio / Video / Image list. + / - Increase or decrease the value on OSD menu. + Increase value[...]

- 10 - Volume Used adjust +/ - to increase / decrease volume . . + Increase volume value - Decrease volume value Channel ? Select channel forward. ? Select channel backward. 1 ~ 10 / +100 Number keys for TV/CATV channels. +[...]

- 11 - OSD Architecture A. Audio Function Press the MENU button will bring up the OSD Menu. Press MENU a gain to select AUDIO. Then, press ITEM to choose functions that require proper adjustments. As shown, press key to adjust. Note: In remote control, press - + key to adjust. (After adjustment, the monitor will store new settings) Volume C ontrols[...]

- 12 - OSD Architecture B. Video Function Under AV1, AV2, S - Video mode: Press the MENU button will bring up the OSD Menu. Press MENU again to select VIDEO. Then, press IT EM to choose functions that require proper adjustments. As shown, press key to adjust. Note: In remote control, press - + key to adjust. (After adjustment, the monitor will stor[...]

- 13 - OSD Architecture Contrast P ermits adjust ment of contrast between light and dark areas of the picture . E xample: Brightness A djust s the overall picture shade and brightness . Tip: Use the Brightness to make details in the dark areas of the picture to be just visible, and Contrast to “ brighten ” the picture without causing noises and[...]

- 14 - OSD Architecture CCD Mode If video signal source directly comes from CCD camera, using CCD Mode is suggested to obtain be tter picture performance . Display Displays video source title. RECALL Sets monitor to the original factory setting.[...]

- 15 - OSD Architecture C. Image Function Under Image mode: Press the MENU button will bring up the OSD Menu. Press MENU again to select IMAGE. Then, press ITEM to choose functions that require proper adjustments. As shown, press key to adjust. Note: In remote control, press - + key to adjust. Image Auto Brightness H - Position Clock DOS Mode Color[...]

(After adjustment, the monitor will store new settings) - 16 - OSD Architecture Auto Auto detect screen detail data such as clock and phase. Contrast P ermits adjust ment for contrast between light or dark areas of the picture . Brightness A djust s the overall picture shade and brightness . Tip: Use the Brightness to make details in the dark areas[...]

- 17 - OSD Architecture Dos Mode Supports picture enhancement when using under DOS mode. Color Temper ature Selects 9300 or 6500 color temperature for display. White Balance Allows the picture white balance adjustment. Display Displays video source title. Recall Sets monitor to the original factory setting.[...]

- 18 - LCD monitor Mo unting Guide A. Desktop Adjust the angle of LCD to provide comfortable viewing B. Wall mount able using two methods: 1) Using the 200 mm pre - cut holes 2) Using the VESA standard wall mount design and the 100mm hole pattern on the back panel to install the LCD monitor to the wall. C. Wall mount[...]

- 19 - Connecting Device Camera or other video source Camera or other video source DVD or other video source PC Loop out to another video device a. Connect PC to Monitor through VGA connector as shown on the above picture b. Connect External device such as DVD or Game Player to Monitor as shown on the above picture c. Connect CCD Camera 1 and 2 to [...]

- 20 - Specification Model LCD Panel 20 .1 inch TFT, TN Mode Display Mode 3D De - interlace Input Filter 3D Comb filter Display area 408 x 306mm Resolution 800 x 600 Brightness 500 cd/m 2 @6mA Contrast ratio 480:1 Response Time 16ms typ. L/R View angle U/D 8 0(left), 8 0(right),60(up),60( down) CR=10 80(left), 80(right), 8 0(up),80(down) CR=5 Input[...]

- 21 - Appendix es A. TROUBLE SHOOTING Problem: 1.No power 2.No video or audio 3.Bad video or audio 4.Image not stable 5.Ab normal line 6.Ghost image 7.Desired video disappear s B Package List A. ADMNLCD20 20 ” LCD Monitor x 1 B. American Power Cor d x 1 C. Europe Power Cor d x 1 D. User Manual x 1 Checking: Power - cor d connecting Power - on LC[...]

E. Accessory Kit x 1 - 22 - Memo[...]

- 23 -[...]