AOC E2239FWT manuale d’uso

[...]

2 Safety ............................................................................................................................... ......................................... 4  National C onventio ns .......................................................................................................... ............................... 4 ?[...]

3 EP A Energy S tar ............................................................................................................... ............................... 5 7  EPEA T Declar ation ............................................................................................................. ............................. 5 8  Service ..[...]

4 Safety National Conventions The following subsections desc ribe nota tional conventions u sed in this document. Notes, Cautions, and W arnings Throughout this guide, blocks of text ma y be accompanied by an icon and printed in b old type or in italic type. These blocks are notes, cautions, and warn ings, and they are used as follows: NOTE: A NOTE[...]

5 Power The monitor should be operat ed only from the type of power source indicated on the label . If you are not sure of the type of power supplied to your hom e, consult your dealer or local power company . The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded po [...]

6 Inst allation Do not place the monitor on a n unst able cart, stand, tripod, bracket, or table. If the monitor falls, it can injure a person and cause serious damage to this product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follo w the manufacturer ’s instructions when installi[...]

7 Cleaning Clean the cabinet regularly with the cloth provided. Y ou can use soft-detergent to wipe out the stain, instead of strong-detergent which will c auterize the product cabinet. When cleaning, make sure no detergent is leaked into the product. T he cleaning cloth should not be too rough as it will scratch the screen surface. Please disconne[...]

8 Other If the product is emitting a strange smell, sound or smoke, disconnect the po w er plug IMMEDIA TEL Y and contact a Service Center . Make sure that the ventilating ope nings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vib ration or high imp act conditions during o peration. Do not knock or drop the monitor[...]

9 Setup Content s in Box Not all signal cables (Analog, USB, Audio, and HDMI cables) will be pr ovided for all countries an d regions. Please check with the local deal er or AOC branch office for confirmation.[...]

10 Adjusting V iewing Angle For optimal viewing it is recommended to look at the full fa ce of the monitor , then adjust the monitor's angle to your own preference. Hold the stand so you will not toppl e the moni tor when you change the monitor's angle. Y ou are abl e to adjust the monitor's angle from -4° to 13 °. NOTE: Do not tou[...]

11 Dual S t and In order to save desk space, notebook, key board an d mouse can be put under Dual S tand when the display is boundled to them. For specific use, pleas e see the following drawings.[...]

12 Connecting the Monitor Cable Connections On Back of Monitor and Computer: 1. Power 2. USB 3. USB 4. Audio 5. Analog 6. HDMI 1 7. USB 8. HDMI 2 T o protect equipment, always turn off the PC and LCD monitor before connecting. 1 Connect the po wer cable to the AC port on the back of the monitor . 2 Connect o ne end of the 15-pin D-Sub cable to the [...]

13 Multi-touch Screen User can use Display Multi-touch F unction under operat ing system higher than W indow 7 home premium. Before using Display Multi-touch Function, user n eed to connect basic wires ( power cable, VGA cable, USB cable). Then user can fully enjoy Multi-touc h Function. Part of specific use, please see the follo wing drawings.[...]

14 Adjusting Setting Optimal Resolution Windows Vist a For Window s Vista: 1 Click ST ART . 2 Click CONTROL P ANEL. 3 Click Appearance and Pers onalization. 4 Click Personalization[...]

15 5 Click Display Settings. 6 Set the resolution SLIDE-BAR to 1920 by 1080 .[...]

16 Windows XP For Windows XP: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Click Appearan ce and Themes. 5 Double click DISPLA Y .[...]

17 6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to 1920 by 1080 . Windows ME/2000 For Windows ME/2000: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Double click DISPLA Y . 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to 1920 by 1080 .[...]

18 Hotkeys Power Press to turn on or turn off the monitor . Source (4 : 3 or wide) / Up Press key to change the screen aspect ratio bet w een standard 4 ： 3format or Wide format. When the input resolution is wide format, the aspect ratio hotke y is disa bled. W hen the main menu or sub-menu is active, the key functions as to select up or increase[...]

19 OSD Setting Basic and simple instruction o n the control keys. When you pres s the MENU button on the fr ont control of your monitor , the On DOWN Screen Display (OSD) Main Controls window will pop up and you can then start making adj ustment s to your monitor's vario us features. Use the UP or DOWN keys to make your adjustments. Follow the[...]

20 Eco mode[...]

21 Item Icon Function Ad just Range Description Eco mode DCR Select to active Dynamic contrast ratio S tandard Select to active S tandard Mode T ext Select to active T ext Mode Internet Select to ac tive Internet Mode Game Select to ac tive Game Mode Movie Select to active Movie Mode S ports Select to active S ports Mode Notes : When Eco mode is no[...]

22 Color Boost[...]

23 Item Icon Function Ad just Range Description Color Boost Full Enhance on or off Disable or Enable Full Enhance Mode Nature Skin on or off Disable or Enable Nature Skin Mode Sky-blue on or off Disable or Enable Sky-b lue Mode Green Field on or off Disable or En able Green Field Mode Auto Detect on or off Disable or Enable AutoDetect Mode Demo on [...]

24 Luminance[...]

25 Item Icon Function Ad just Range Description Luminance Brightness 00-100 Contrast 00-100 Gamma Gamma1, 2, 3 Adjust to Gamma1, Gamma2, Gamma3 Exit Exit to main menu Notes : When Eco mode is not set as “S tandard”, Contrast and Brightness can not be adjusted; When DCR is set as “On”, Contrast, Brightness, Eco mode and Gamma can not be adju[...]

26 Image Setup[...]

27 Item Icon Function Ad just Range Description Image Setup Clock 00-100 Adjust picture Clock to reduce V ertical-Line noise. Phase 00-100 Adjust Picture Phase to reduce Horizontal-Line noise H.Position 00-100 Adjust the vertical position of the picture. V. P o s i t i o n 00-10 0 Adjust the horizontal position of the picture. Exit Exit to main men[...]

28 Color T emperature[...]

29 Item Icon Function Adjust Range Description Color T emperatu re User Red 00-100 Red Gain from Digital-register User Green 00-100 Green Gain Digital-register . User Blue 00-100 Blue Gain from Digital-register Normal 7300K Recall Normal Color T emperature from EEPROM. W arm 6500K Recall W arm Color T emperature from EEPROM. Cool 9300K Recall Cool [...]

30 Picture Boost[...]

31 Item Icon Function Adjust Range Description Picture Boost Horizontal Position 00-100 Adjust F rame horizontal Position V ertical Position 00-100 Adjust F rame vertical Position Contrast 00-100 Adjust F rame Contrast Brightness 00-100 Adjust F rame Brightness Frame Size 14-100 Adjust Frame Size Bright Frame on or off Disable or Enable Bright Fram[...]

32 Extra Setting[...]

33 Item Icon Function Adjust Range Description Extra Setting Language Select the OSD language Reset yes or no Reset the menu to default DDC-CI yes or no Turn ON/OFF DDC-CI Support T imeout 05- 120 Adjust the OSD T imeout T ransparence 00-100 Adjust the transparence of OSD H. Position 00- 100 Adjust the verti cal position of OSD V . Position 00-100 [...]

34 Exit[...]

35 LED Indicator Stat us LED Color Full Power Mode Blue Active-off Mode Orange[...]

36 Driver Monitor Driver Windows 2000 1. S tart Window s® 2000 2. Click on the 'S tart' button, point to 'S ettings', and then click on 'Control Pane l'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' - If the[...]

37 Windows XP 1. S tart Window s® XP 2. Click on the 'S tart' button and t hen click on 'Control Panel'. 3. Select and click on the categor y ‘Appearan ce and Themes’ 4. Click on the 'Display' Item.[...]

38 5. Select the 'Settings' tab then click on the 'Advanced' butt on. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your m onitor is properly configur ed. Please stop installation. - If the 'Properties' button is active, click on 'Properties' button. Please fol[...]

39 8. Select the 'Install from a list or specific location [ advanced]' radio button and then click on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio button. Then click on the 'Next' button. 10. Click on the 'Have disk...' button, then click on the &a[...]

40 Windows Vist a 1. Click "S tart " and "Control Panel". Then, doubl e-click on "Appearance and Personaliz ation". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings...".[...]

41 4. Click "Properties" in the "Monitor" tab. If the "Properties" button is deactivated, it means the configuration for your monitor is completed. The monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below , click "Continue". 5. Click "Update Dr[...]

42 Windows 7 1.S tart Windows® 7 2.Click on the 'St art' button and then click on 'Control Panel'. 3. Click on the 'Display' icon. 4.Ckick on the “Change display settings ” button.[...]

43 5. Click the “ A dvanced Settings” button. 6. Click the “Monitor” tab and then click the “Properties” button. 7.Click the “Driver” tab.[...]

44 8. Open the "Update Driver Soft w are-Generic PnP Monitor" window by clicking on “Update Driver... “ and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device driv ers on my computer" . 10. Click the “Have Disk” button. Click on the “Brow se” button [...]

45 11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button. 12. Select your monitor model and click the “Next” button. The files will be copi ed from the CD to your hard disk drive. 1 3. Close all open windows and remove the CD. 14. Restart the system. The system will automatically select the maximum r[...]

46 i-Menu Welcome to “i-Menu” software by AOC. i-Menu makes it easy to adjust yo ur monitor display setting by using on screen menus instead of the OSD button on the monitor . T o complete installation, please follow the installation guide.[...]

4 7 e-Saver Welcome to use AOC e-Saver monitor po w er manageme nt software! The AOC e-Saver features Smart Shutdown functions for your monitors, all ows your monitor to timely shutdo w n when PC unit is at any status (On, Off, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see example below). Please click on "dr[...]

48 SRS WOW HD™ significantly improves the pla yback quality of audio, delivering a dynamic 3D entertainment experience w ith deep, rich bass and hi gh frequency clarity for crisp detail. T o complete installation, please follow the installation guide.[...]

T ouchPal T ouchPal can make your touch experience more convenie nt and more easily . T ouchPal including 3 applica tions, they are “T ouch Assistant”, “T ouch Launch” and “Gesture Application”. T ouchPal can work well un der Windows XP , Windows Vista and Windows 7. Please make sure the touch monitor has been connected with the PC USB [...]

50 T roubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the Power Cord is properly connected to a grounded power outlet and to the monitor . No images on the screen Is the power cord connected properly? Check the power cord connection and po wer supply . Is the cable connected correctly? ([...]

5 1 Monitor Is Stu ck In A ctive Off-Mode" The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly fitted in its slot. Make sure the monitor's video cable is prop erly connected to the computer . Inspect the monitor's video cable and mak e sure no pin is bent. Make sure your computer is operat[...]

5 2 S pecification General S pecification LCD Panel Model name e2239Fwt Driving system TFT Color LED Viewable Image Size 21.5" Pixel pitch 0.24825(H) x0.24825(V) Video R, G , B Analog lnterface Separate Sync. H/V TTL Display Color 16.7M Dot Clock 148.5Mhz Resolution Horizontal scan range 30 kHz - 80 kHz Horizontal scan Size (Maxi mum) 476.64mm[...]

5 3 Environmental Temperature: Operating 0° to 40° Non-Operating -25°to 55° Humidity: Operating 10% to 85% (non-condensing ) Non-Operating 5% to 93% (non-condensing) Altitude: Operating 0~ 3658m (0~ 12000 ft ) Non-Operating 0~ 12192m (0~ 40000 ft ) Preset Display Modes ST AND RESOLUTION HORIZONT AL FREQUENCY(kHZ) V ERTICAL FREQUENCY(Hz) VGA 640[...]

5 4 Pin Assignment s Pin Number 15-Pin Side of the Signal Cabl e 1 Video-Red 2 Video-Green 3 Video-Blue 4 N.C. 5 Detect Cable 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 Ground 11 N.C. 12 DDC-Serial data 13 H-sync 14 V- s y n c 15 DDC-Serial clock Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1 TMDS Data 2+ 9 TMDS Data 0 17 DDC/CEC Ground 2 TMDS[...]

5 5 Plug and Play Plug & Play DDC2B Feature This monitor is equipped w ith VESA DDC2B capabilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, dependi ng on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bi-directional data ch[...]

5 6 Regulation FCC Notice FCC Class B Radio Freq u ency Interferen ce S tatement W ARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to compl y with the limit s for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide reasonabl e protection against harmful interference[...]

5 7 WEEE Declaration Disposal of W aste Equipment by Users in Pr ivate Household in the European Un ion. This symbol on the product or on its packaging indicates t hat this product must not be di sposed of with your other household wast e.Instead, it is your responsibility to dis pose of your waste equipment by handing it ov er to a designated coll[...]

5 8 EPEA T Declaration EPEA T is a system to help purchasers in the public an d private sectors eva luate, compare and select desktop computers, notebooks and monitors ba sed on their environmental attributes . EPEA T also provides a clear and consistent set of performance criteria for the design of products, and provides an opportunit y for manufa[...]

5 9 Service W arranty St atement for Europe LIMITED THREE-YEAR W ARRANTY* AOC Color Monitors sold within Europe AOC International (Europe) GmbH warrant s this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of c onsumer purchase. During this per iod, AOC Internatio nal (Europe) Gmb[...]

60 This limited warranty does not cover any of the product fi rmware or hardware that you or any third party have modified or altered; you bear the sole responsibility and liabilit y for any such modification or alteration. ALL EXPRESS AND IMPLIED W ARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANT ABILIT Y AND FITNESS FOR A P ARTICU[...]

6 1 W arranty S t atement for North & South America (excluding Brazil) W ARRANTY ST A T EMENT for AOC Color Monitors Including those Sold w ithin North America as S pecified Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of three (3) years for parts & labor and one (1) year [...]

6 2 ALL EXPRESS AND IMPLIED W ARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANTIES OF MERCHANT ABILIT Y AND FITNESS FOR A P ARTICULAR PURPOSE) ARE LIMITED IN DURA TION TO A PERIOD OF THREE (3) YEARS FOR P ARTS AND LABOR AND ONE (1) YEAR FOR CR T TUBE OR LCD P ANEL FROM THE ORIGINAL DA TE OF CONSUMER PURCHASE. NO W ARRANTIES (EITHER EXPRESSED OR IMP[...]