AOC E2460SWD manuale d’uso

[...]

2 Safety ........................................................................................................................................................................ 3 National Conventions ......................................................................................................................................... 3 Power ...[...]

3 Safe ty National Con ventions The following subsections describe notational conventions used in this document. Notes, Cautions, and W arnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE ind[...]

4 Power The monitor should be operated only from the ty pe of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local pow er company . The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. This plug will fit only into a grounded pow [...]

5 Installation Do not place the mo nitor on an unstable cart, stand, tripod, br acket, or ta ble. If t he monitor falls, it can i njure a person and cause serious damage to thi s product. Use only a cart, stand, tripod, bra cket, or table recommended by the manufacture r or sold with this product. Follow the manufacturer‟s instructions when insta[...]

6 Cleaning Clean the cabinet regularly with cloth. Y ou can use soft-detergent to wipe out the stain, inste ad of strong-detergent which will cauterize the product cabinet. W hen c leaning, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface. Please disconnect the power[...]

7 Other If the product is emitting a strange smell, sound or smoke, disconnect the pow er plug IMMEDIA TEL Y and contact a Service Center . Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor duri[...]

8 Setup Contents in Box Monitor CD Manual Monitor Base Power Cable Analog Cable DVI Cable Not all signal cables (Analog, DVI cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch of fice for confirmation.[...]

9 Setup Stand & Base Please setup or remove the base following the steps as below . Setup: Remove:[...]

10 Adjusting Vie w ing Angle For optimal viewing it is recommended to look at the f ull face of the monitor , then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor w hen you change the monitor's angle. Y ou are able to adjust the monit or's angle from -5° to 20 ° . NOTE: Do not to[...]

11 Connecting the Monitor Cable Connections In Back of Monitor and Computer: 1. Power 2. DVI cable 3. D-Sub cable T o p rotect equipment, always turn off the PC an d LCD monitor before connecting. 1 Connect the power cable to the AC p ort on the back of the monitor . 2 Connect one end of the 15-pin DVI /D-Sub cable to the back of the monitor and co[...]

12 W all Mounti ng Pr eparing to Install An Optional Wall M ounting Arm. This monitor can be attached to a wall mounting arm you purchase separately . Disconnect power before this procedure. Follow these steps: 1 Remove the base. 2 Follow the manufacturer's instructions to assemble the wall mounting arm. 3 Place the wall mounting arm onto the [...]

13 Adjusting Setting Optimal Resol ution Windows V ista For Windows Vista: 1 Click ST ART . 2 Click CONTROL P ANEL. 3 Click Appearance and Personalization. 4 Click Personalization[...]

14 5 Click Display Settings. 6 Set the resolution SLIDE-BAR to 1920 by 1080 .[...]

15 Windows XP For Windows XP: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Click Appearance and Themes. 5 Double click DISPLA Y .[...]

16 6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to 1920 by 1080 . Windows ME/2000 For Windows ME/2000: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Double click DISPLA Y . 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to 1920 by 1080.[...]

17 Hotkeys 1 Source/Auto/Exit 2 Eco (DCR) 3 4:3 or Wide 4 Menu/Enter 5 Power Power Press the Power button to turn o n/ off the monitor . Menu/Enter Press to display the OSD or confirm the selection. Eco (DCR) Press the Eco key continuously to select the Eco mode of brightness and DCR on w hen there is no OSD. (Eco mode hot key may not be available [...]

18 OSD Setting Basic and simple instruction on the control key s. 1) Press the M ENU-button to activate the OSD window . 2) Press < or > to navigate through the functions. Once the de sired function is highlighted, press the MENU-button to activate it . press < or > to navigate through the sub-menu functions. Once the desired function i[...]

19 Luminance 1. Press (Menu) to d isplay menu. 2. Press < or > to select (Luminance ), and press to enter . 3. Press < or > to select submenu, and press to enter.[...]

20 4. Press < or > to adjust. 5. Press to exit . Brightness 0-100 Backlight Adjustment Contrast 0-100 Contrast from Digital-register. Eco mode Standard Standard Mode Text Text Mode Internet Internet Mode Game Game Mode Movie Movie Mode Sports Sports Mode Gamma Gamma1 Adjust to Gamma1 Gamma2 Adjust to Gamma 2 Gamma3 Adjust to Gamma 3 DCR Off D[...]

21 Image Setup 1. Press (Menu) to d isplay menu. 2. Press < or > to select ( Image Setup), and press to enter . 3. Press < or > to select submenu, and press to enter.[...]

22 4. Press < or > to adjust. 5. Press to exit . Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise. Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise Sharpness 0- 100 Adjust picture sharpness H.Position 0-100 Adjust the horizontal position of the picture. V.Position 0-100 Adjust the vertical position of the picture[...]

23 Color Setup 1. Press (Menu) to d isplay menu. 2. Press < or > to select ( Color Setup), and press to enter . 3. Press < or > to select submenu, and press to enter.[...]

24 4. Press < or > to adjust. 5. Press to exit . Color T emp. W arm Recall Warm Color Temperature from EEPROM . Normal Recall Normal Color Temperature from EEPROM. Cool Recall Cool Color Temperature from EEPROM . sRGB Recall SRGB Color Temperature from EEPROM. User Red Red Gain from Digital-register Green Green Gain Digital-register. Blue Blu[...]

25 Picture Boost 1. Press (Menu) to d isplay menu. 2. Press < or > to select ( Picture Boost), and press to enter . 3. Press < or > to select submenu, and press to enter.[...]

26 4. Press < or > to adjust. 5. Press to exit . Frame Size 14 -100 Adjust Frame Size Brightness 0-100 Adjust Frame Brightness Contrast 0-100 Adjust Frame Contrast H. position 0- 100 Adjust Frame horizontal Position V.position 0- 100 Adjust Frame vertical Position Bright Frame on or off Disable or Enable Bright Frame[...]

27 OSD Setup 1. Press (Menu) to d isplay menu. 2. Press < or > to select ( OSD Setup), and press to enter . 3. Press < or > to select submenu, and press to enter.[...]

28 4. Press < or > to adjust. 5. Press to exit . H.Position 0-100 Adjust the horizontal position of OSD V.Position 0-100 Adjust the vertical position of OSD Timeout 5- 120 Adjust the OSD Timeout Transparence 0- 100 Adjust the transparence of OSD Language Select the OSD language[...]

29 Extra 1. Press (Menu) to d isplay menu. 2. Press < or > to select ( Extra), and press to enter . 3. Press < or > to select submenu, and press to enter.[...]

30 4. Press < or > to adjust. 5. Press to exit . Input Select Analog Select Analog Sigal Source as Input Auto Config yes or no Auto adjust the picture to default Off timer 0-24hrs Select DC off time Image Ratio wide or 4:3 Select wide or 4:3 format for display DDC - CI yes or no T u rn ON/OFF DDC-CI Support Reset Y es or no Reset the menu to [...]

31 Exit 1. Press (Menu) to d isplay menu. 2. Press < or > to select (Exit), and press to enter . 3. Press to exit . Exit Exit the main OSD[...]

32 LED Indicator Status LED Color Full Power Mode Green or Blue Active-off Mode Orange or red[...]

33 Driver Monitor Dri ver Windows 7 1. Start Windows® 7 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Click on the 'Display' icon.[...]

34 4.Ckick on the “ Change display settings ” button. Click the “ Advanced Settings” button. Click the “Monitor” tab and then click the “Properties” button.[...]

35 7. Click the “Driver” tab. 8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver ... “ and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device drivers on my computer" .[...]

36 10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X: Drivermo dule name (w here X is the drive letter designator for the CD-ROM drive). 11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button. 12 . Select your monitor model and click the ?[...]

37 Windows V ista 1. Click "Start " and "Control Panel". T hen, double -click on "Appearance and Personalization". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings...".[...]

38 4. Click "Properties" in th e "M onitor" tab. If the "Properties" button i s deactivated, it means the co nfiguration for your monitor is completed. T he monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below , c lick "Continue". 5. Click "Upd[...]

39 Windows XP 1. Start Windows® X P 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Select and click on the category „Appearance and T hemes‟ 4. Click on the 'Display' Item.[...]

40 5. Select the 'Settings' tab then click on the 'Advanced' button. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active, click on 'Properties' butto n. Please follo[...]

41 8. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio button. T hen click on the 'Nex t' button . 10. Click on the 'Have disk...' button, then click on the [...]

42 Windows 2000 1. Start Windows® 2000 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' - If the 'Properties' but[...]

43 i-Menu Welcome to “i - Menu” softw are by AOC. i -Menu makes it easy to adjust your monitor display setting by usi ng on screen menus instead of the OSD button on the monitor . T o complete installation, please follow the installatio n guide.[...]

44 e-Saver W elcome to u se AOC e-Saver monitor power management software! The AOC e -Saver features Smart Shutdown functions for your monitors, allow s your monitor to timely shutdow n when PC unit is at any status (On, O ff, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see ex ample below). Please click on "dr[...]

45 Screen+ Welcome to "Screen+" softw are by AOC, Screen+ softw are is a desktop screen splitting tool, it splits the desktop into different panes, each pan e displays a different w indow . Y ou onl y need to drag the window to a corresponding pane, when you want to access it. It supports multiple monitor display to make your tas k easier[...]

46 T roubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON and the P ower Cord is properly connected to a grounded power outlet and to the monitor . No images on the screen Is the power cord connected properly? Check the power cord connection and power supply . Is the cable connected correctly? ([...]

47 Specification General Specifi cation Panel Model name E2 460S WD Driving system TFT Color LCD Viewable Image Size 59.8 c m diagonal Pixel pitch 0. 2715 mm(H) x 0. 2715 mm(V) Video R, G, B An alog lnterface Separate Sync. H/V TT L Display Color 16.7M Colors Dot Clock 170 MHz Resolution Horizontal scan range 30 kHz - 83 kHz Horizontal scan Size(Ma[...]

48 Preset Displa y Modes ST AND RESOLUTION HORIZONT AL FREQUENCY(kHZ) VERTICAL FREQUENCY(Hz) VGA 640× 480 @60Hz 31.469 59.94 640× 480 @72Hz 37.861 72.809 640× 480 @75Hz 37.5 75 SVGA 800× 600 @56Hz 35.156 56.25 800× 600 @60Hz 37.879 60.317 800× 600 @72Hz 48.077 72.188 800× 600 @75Hz 46.875 75 XGA 1024× 768 @60Hz 48.363 60.004 1024× 768 @70H[...]

49 Pin A ssignments Pin Number 15 -Pin Side of the Signal Cable 1 Video-Red 2 Video-Green 3 Video-Blue 4 Ground 5 Detect Cable 6 GND-R 7 GND-G 8 GND-B 9 +5V 10 Ground 11 Ground 12 DDC -Serial data 13 H-sync 14 V -s ync 15 DDC -Serial clock Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1. TMDS Data 2- 9. TMDS Data 1- 17. TMDS Data 0- 2[...]

50 Plug and Pla y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B c apabilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, c ommunicate additional information about its display capabilities. The DDC2B is a bi-directional data ch[...]

51 Regulation FCC Notice FCC Class B Radio Frequency Interference State ment W ARNING: (FOR FCC CERTIFIED M ODELS) NOTE: This equipment has been tested an d found to comp ly w ith the limits for a Clas s B digital device, p ursuant to Part 15 of the FCC Rules. T hese limits are designed to provide reasonable protection agai nst harmful interference[...]

52 WEEE Declaration Disposal of Was te Equipment by Users in Private Household in the European Union. This symbol on the product or on its packaging indicates that this product must not be disposed of w ith your other household waste.Instead, it is your responsibility to dispose of your w aste equipment by handing it over to a designated collection[...]

53 EPE A T Declarat ion EPEA T is a system to help purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes. EPEA T also provides a clear and consistent set of performance criteria for the design of products, and provides an opportunity for manufactur[...]

54 Service EU W ARRANTY FOR A OC MONITORS LIMITED THREE-YEAR W ARRANTY* For AOC LCD M onitors sold within Europe, AOC International (Europe) B.V . warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase. During this period, AOC International (Europe) B.V [...]

55 ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANT IES OF MERCHANT ABIL ITY AND FI TNESS FOR A P ARTICULAR PURPOSE) ARE LIMITED IN DURA TION T O A PERIOD OF T HREE (3) YEARS FOR P ARTS AND LABOR F ROM T HE ORIGINAL DA TE OF CONSUMER PURCHASE. NO WARRAN TIES (EITHER EXPRESSED OR IM PLIED) APPL Y AFTER THIS PERIOD . AOC INT[...]

56 W arranty Statement for North & South A m erica (excluding Brazil) WARR ANTY ST A TEMENT for AOC Color M onitors Including those Sold within North America as Specified Envision Peripherals, Inc. warrants this product to be free fro m defects in material and workmanship for a period of three (3) years for parts & labor and one (1) year fo[...]

57 ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING THE WARRANT IES OF MERCHANT ABIL ITY AND FI TNESS FOR A P ARTICULAR PURPOSE) ARE LIMITED IN DURA TION T O A PERIOD OF T HREE (3) YEARS FOR P ARTS AND LABOR AND ONE (1) YEAR FOR CR T TUBE OR LCD P ANEL FROM T HE ORIGINAL DA TE OF CONSUMER PURCHASE. NO WARRAN TIES (EITHER EXPRESSED OR [...]

58 Only for AOC bra nded monitors sold within the continental Un ited States. All AOC branded m onitors are now covered by the EASE Prog ram. If y our monitor malfuncti ons at any time during th e first three m onths, AOC wil l provide a replacem ent monitor w ithin 72 hour s after you are approv ed for our prog ram. If your m onitor qualifies for [...]