AOC E2770PQU manuale d’uso

E2770S D /E2770S HE /E2770P QU Q2770P QU M2770V/M2870 V (LED Backlight)[...]

2 Safety ........................................................................................................................................................................ 4 National Conventions ......................................................................................................................................... 4 Power ...[...]

3 Regulation ............................................................................................................................................................... 61 FCC Notice ...................................................................................................................................................... 61 W EEE Dec[...]

4 Safe ty National Con ventions The following subsections describe notational conventions used in this document. Notes, Cautions, and W arnings Throughout this guide, blocks of text may be accompanied by an icon and printed in bold type or in italic type. These blocks are notes, cautions, and warnings, and they are used as follows: NOTE: A NOTE ind[...]

5 Power The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company . The monitor is equipped with a three-pronged grounded plug, a plug with a third (grounding) pin. T his plug will fit only into a grounded pow e[...]

6 Installation Do not place the mo nitor on an unstable cart, stand, tripod, bracket, or table. If the monitor f alls, it c an injure a person and cause serious damage to thi s product. Use only a cart, stand, tripod, bracket, or table recommended by the manufacturer or sold with this product. Follow the manufacturer’s instructions when installin[...]

7 Cleaning Clean the cabinet regularly with cloth. Y ou can use soft-detergent to wipe out the stain, instead of strong-detergent which will cauterize the product cabinet. W hen cleani ng, make sure no detergent is leaked into the product. The cleaning cloth should not be too rough as it will scratch the screen surface. Please disconnect the power [...]

8 Other If the product is emitting a strange smell, sound or smoke, disconnect the pow er plug IMMEDIA TEL Y and contact a Service Center . Make sure that the ventilating openings are not blocked by a table or curtain. Do not engage the LCD monitor in severe vibration or high impact conditions during operation. Do not knock or drop the monitor duri[...]

9 Setup Content of the Box Not all signal cables (Analog , Audio , DVI , USB , DP , MHLand HDMI cables) will be provided for all countries and regions. Please check with the local dealer or AOC branch office for confirmation. Monitor CD Manual Monitor Base / Stand W ire holder MHL cable Power Ca ble D VI Cable A nalog Cable H DMI Ca ble USB Ca ble [...]

10 Setup Stand Please setup or remove the Stand following the steps as below . 70S /70V Setup Remove: 70P Setup: Remove:[...]

11 Adjusting Viewing Angle For optimal viewing it is recommended to look at the f ull face of the monitor , then adjust the monitor's angle to your own preference. Hold the stand so you will not topple the monitor w hen you change the monitor's angle. Y ou are able to ad just the monitor's angle from -5° to 25 ° . NOTE:Do not adjus[...]

12 Connecting the Monitor Cable Connections In Back of Monitor and Computer: 1. E2770SD/M2770V/M2870V 2. E2770SHE[...]

13 3 .E2770PQU 4 . Q2770PQU 1. Power 2. Analog (D-Sub 15-Pin VGA cable) 3. DVI 4. HDMI 5. Audio in 6. Earphone out 7. Display port 8. HDMI/M HL 9. USB input 10. USB 2.0x2 11. USB 3.0 12. USB 3.0+ fast charging 13. AC power switch T o pro tect equipment, always turn of f the PC and LCD monitor before connecting. 1. Connect the power cable to the AC [...]

14 W all Mounti ng Preparing to Install An Optional Wall M ounting Arm. 70S /70V 70 P This monitor can be attached to a wall mounting arm you purchase separately . Disconnect power before this procedure. Follow these steps: 1. Remove the base. 2. Follow the manufacturer's instructions to assemble the wall mounting arm. 3. Place the wall mounti[...]

15 Adjusting Setting Optimal Resol ution Windows V ista For Windows Vista: 1 Click ST ART . 2 Click CONTROL P ANEL. 3 Click Appearance and Personalization. 4 Click Personalization[...]

16 5 Click Display Settings. 6 Set the resolution SLIDE-BAR to Optimal preset resolution[...]

17 Windows XP For Windows XP: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Click Appearance and Themes. 5 Double click DISPLA Y .[...]

18 6 Click SETTINGS. 7 Set the resolution SLIDE-BAR to Optimal preset resolution Windows ME/2000 For Windows ME/2000: 1 Click ST ART . 2 Click SETTINGS. 3 Click CONTROL P ANEL. 4 Double click DISPLA Y . 5 Click SETTINGS. 6 Set the resolution SLIDE-BAR to Optimal preset resolution[...]

19 Windows 8 For Windows 8: 1. Right click and click All apps at the bottom-right of the screen. 2. Set the “ View by ” to “ Category ”. 3. Click Appearance and Personalization.[...]

20 4. Click DISPLAY. 5. Set the resolution SLIDE-BAR to Optimal preset resolution.[...]

21 Hotkeys E2770SD/M2770V/M2870V 1 Source/Auto/Exit 2 Clear Vision/- 3 4:3 or Wide/+ 4 Menu/Enter 5 Power E2770SHE/ E2770PQU/Q2770PQU 1 Source/Auto/Exit 2 Clear Vision/- 3 V ol ume/+ 4 Menu/Enter 5 Power[...]

22 Clear Vision 1. W hen there is no OSD, Pre ss the “ - ” button to activate Clear Vision. 2. Use the “ - ” or “ + ” buttons to select between weak, medium, strong, or of f settings. Def ault setting is always “off” . 3. Press and hold “ - ” button for 5 seconds to activate the Clear Vision Demo, and a message of “ Clear Visi[...]

23 Using "MHL(Mobile Hi gh-Definit ion Link)" （ Optional ） 1."MHL" (Mobile High-Definition Link) This feature allows you to enjoy videos and photos (imported from a connected mobile device that supports MHL) on the screenof the product.  T o us e the MHL fu nction, you need an MHL-certi fied mobile device. Y ou can check [...]

24 OSD Setting Basic and simple instruction on the control keys. 1. Press the MENU-button to activate the OSD window . 2. Press - or + to navigate through the functions. Once the desir ed function is highlighted, press the MENU-button to activate. Press - or + to navigate through the sub-menu. Once the desired function is highlighted , press MENU-b[...]

25 Luminance 1 Press (Menu) to display menu. 2 Press - or + to select (L uminance), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . Brightness 0-100 Backlight Adjustment. Contrast 0-100 Contrast from Digital-register. Eco mode Standard Standard Mode. Text Text Mode. Internet In[...]

26 Image Setup 1 Press (Menu) to display menu. 2 Press - or + to select (Image Setu p), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . Clock 0-100 Adjust picture Clock to reduce Vertical-Line noise. Phase 0-100 Adjust Picture Phase to reduce Horizontal-Line noise. Sharpness 0-[...]

27 Color Setup 1 Press (Menu) to display menu. 2 Press - or + to select (Col or Setup), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . Color Temp. W arm Recall Warm Color Temperature from EEPROM . Normal Recall Normal Color Temperature from EEPROM. Cool Recall Cool Color Tempe[...]

28 Picture Boost 1 Press (Menu) to display menu. 2 Press - or + to select (Pi cture Boost), and press to e nter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . Frame Size 14 -100 Adjust Frame Size. Brightness 0-100 Adjust Frame Brightness. Contrast 0-100 Adjust Frame Contrast. H. position 0- 100 [...]

29 OSD Setup 1 Press (Menu) to display menu. 2 Press - or + to select (OSD Setup ), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . H. Position 0-100 Adjust the horizontal position of OSD. V. Position 0-100 Adjust the vertical position of OSD. Timeout 5- 120 Adjust the OSD Time[...]

30 Extra 1 Press (Menu) to display menu. 2 Press - or + to select (Extra), and press to enter . 3 Press - or + to select submenu, and press to enter . 4 Press - or + to adjust. 5 Press to exit . Input Select Auto / Analog / DVI / HDMI(MHL) /DP Select input signal source. ( E2770PQU) Input Select Auto / Analog / HDM I 1/ HDMI2 Select input signal so[...]

31 Exit 1 Press (Menu) to display menu. 2 Press - or + to select (Exit), and p ress to e nter . 3 Press to exit . Exit Exit the main OSD.[...]

32 LED Indicator Status LED Color Full Power Mode Green or Blue Active-off Mode Orange or red[...]

33 Driver Monitor Dri ver Windows 2000 1. Start Windows® 2000 2. Click on the 'Start' button, point to 'Settings', and then click on 'Control Panel'. 3. Double click on the 'Display' Icon. 4. Select the 'Settings' tab then click on 'Advanced...'. 5. Select 'Monitor' - If the &ap[...]

34 Windows XP 1. Start Windows® X P 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Select and click on the category ‘Appearance and T hemes’ 4. Click on the 'Display' Item.[...]

35 5. Select the 'Settings' tab then click on the 'Advanced' button. 6. Select 'Monitor' tab - If the 'Properties' button is inactive, it means your monitor is properly configured. Please stop installation. - If the 'Properties' button is active, click on 'Properties' butto n. Please follo[...]

36 8. Select the 'Install from a list or specific location [advanced]' radio button and then click on the 'Next' button. 9. Select the 'Don't Search. I will choose the driver to install' radio butt on. Then click on the 'Nex t' button. 10. Click on the 'Have disk...' button, then click on the &[...]

37 Windows V ista 1. Click "Start " and "Control Panel". T hen, double -click on "Appearance and Personalizati on". 2. Click "Personalization" and then "Display Settings". 3. Click "Advanced Settings...".[...]

38 4. Click "Properties" in the "M onitor" t ab. If the "Properties" button is deactivated, it m eans th e configuration for your monitor is completed. T he monitor can be used as is. If the message "Windows needs..." is displayed, as shown in the figure below , c lick "Continue". 5. Click "Upd[...]

39 Windows 7 1. Start Windows® 7 2. Click on the 'Start' button and then click on 'Control Panel'. 3. Click on the 'Display' icon.[...]

40 4.Ckick on the “ Change display settings ” button. 5. Click the “ Advanced Settings” button. 6. Click the “Monitor” tab and then click the “Properties” button.[...]

41 7. Click the “Driver” tab. 8. Open the "Update Driver Software-Generic PnP Monitor" window by clicking on “Update Driver ... “ and then click the "Browse my computer for driver software" button. 9. Select "Let me pick from a list of device drivers on my computer" .[...]

42 10. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X: Drivermo dule name (w here X is the drive letter designator for the CD-ROM drive). 11. Select the "xxx.inf" file and click the “Open” button. Click the “OK” button. 12 . Select your monitor model and click the ?[...]

43 Windows 8 1. Start Windows® 8 2. Right click and click All apps at the bottom-right of the screen. 3. Click on the “ Control panel ” icon 4. Set the “ V iew by ” to “Large icons” or “Small icons” . 5. Click on the “ Display ” icon.[...]

44 6. Click on the “Change display settings” button. 7. Click the “ Advanced Settings” button . 8. Click the “Monitor” tab and then click the “Properties” button .[...]

45 9. Click the “Driver” tab. 10. Open the “ Update Driver Software-Generic PnP Monitor ” window by clicking on “Update Driver ... “ and then click the "Browse m y computer for driver software" button. 11. Select "Let me pick from a list of device drivers on my computer" .[...]

46 12. Click the “Have Disk” button. Click on the “Browse” button and navigate to the following directory: X: Drivermo dule name (where X is the drive letter designator for the CD-ROM drive). 13. Select the "xxx.inf" file and click the “Open” b utton. Click the “OK” button. 14. Select your monitor model and click the “[...]

47 i-Menu Welcome to “i - Menu” softw are by AOC. i -Menu makes it easy to adjust your monitor display setting by usi ng on screen menus instead of the OSD button on the monitor . T o complete installation, please follow the installation guide.[...]

48 e-Saver W elcome to use AOC e-Sav er monitor power management software! The AOC e -Saver features Smart Shutdown functions for your monitors, allow s your monitor to timely shu tdown w hen PC unit is at any status (On, O ff, Sleep or Screen Saver); the actual shutdown time depends on your preferences (see ex ample below). Please click on "d[...]

49 Screen+ Welcome to "Screen+" softw are by AOC, Screen+ softw are is a desktop screen splitting tool, it splits the desktop into different panes, each pan e displ ays a diff erent window . Y o u only need to drag the window to a corresponding pane, when you want to access it. It supports multiple monitor display to make your tas k easie[...]

50 T roubleshoot Problem & Question Possible Solutions Power LED Is Not ON Make sure the power button is ON a nd the Pow er Cord is pr operly connected to a grounded power outlet and to the monitor . No images on the screen Is the power cord connected properly? Check the power cord connection and power supply . Is the signal cable connected cor[...]

51 Monitor Is Stuck In Active Off-Mode" The Computer Power Switch should be in the ON position. The Computer Video Card should be snugly f itted in its slot. Make sure the monitor's video cable is properly connected to the computer . Inspect the monitor's video cable and make sure no pin is bent. Make sure your computer is operationa[...]

52 Specification General Specifi cation Panel Product name E2770SD/E2770SHE/M2770V Driving system TFT Color LCD Viewable Image Size 68.6cm diagonal Pixel pitch 0.31 14mm(H)X0.31 14mm(V) Video R, G, B Analog lnterface & Digital Interface Separate Sync. H/V TT L Display Color 16.7M Colors Dot Clock 148.5MHz Resolution Horizontal scan range 30 kHz[...]

53 Panel Product name E2770PQU Driving system TFT Color LCD Viewable Image Size 68.6cm diagonal Pixel pitch 0.31 14mm(H)X0.31 14mm(V) Video R, G, B Analog lnterface & Dig ital Interface Separate Sync. H/V TT L Display Color 16.7M Colors Dot Clock 148.5MHz Resolution Horizontal scan range 30 kHz - 83 kHz Horizontal scan Size(Maximum) 597.89mm Ve[...]

54 Panel Model name Q2770PQU Driving system TFT Color LCD Viewable Image Size 68. 6 cm diagonal Pixel pitch 0.233mm(H)X0.233mm(V) Video R, G, B Analog lnterface & Dig ital Interface Separate Sync. H/V TT L Display Color 16.7M Colors Dot Clock 241.5MHz Resolution Horizontal scan range 30 kHz - 83 kHz for D-Sub Horizontal scan range 30 kHz - 99 k[...]

55 Panel Model name M2870V Driving system TFT Color LCD Viewable Image Size 71.1cm diagonal Pixel pitch 0.32mm(H)X0.32mm(V) Video R, G, B Analog lnterface & Dig ital Interface Separate Sync. H/V TT L Display Color 16.7M Colors Dot Clock 148.5MHz Resolution Horizontal scan range 30 kHz - 83 kHz Horizontal scan Size(Maximum) 620.9mm V erti cal sc[...]

56 Preset Displa y Modes E2770SD/E2770SHE/E2770PQU/M2770V/M2870V Standard Resolution H. Frequency (kHz) V . Frequenc y (Hz) VGA 640 X 480@60Hz 31.469 59.94 MAC MODE 640 X 480@67Hz 35 66.667 VGA 640 X 480@72Hz 37.861 72.809 VGA 640 X 480@75Hz 37.5 75 IBM MODE 720 X 400@70Hz 31.469 70.087 SVGA 800 X 600@56Hz 35.156 56.25 800 X 600@60Hz 37.879 60.317 [...]

57 Q2770PQU Standard Resolution H. Frequency (kHz) V . Frequenc y (Hz) VGA 640 X 480@60Hz 31.469 59.94 MAC MODE 640 X 480@67Hz 35 66.667 VGA 640 X 480@72Hz 37.861 72.809 VGA 640 X 480@75Hz 37.5 75 IBM MODE 720 X 400@70Hz 31.469 70.087 SVGA 800 X 600@56Hz 35.156 56.25 800 X 600@60Hz 37.879 60.317 800 X 600@72Hz 48.077 72.188 800 X 600@75Hz 46.875 75[...]

58 Pin A ssignments 15 -Pin Color Display Signal Cable Pin N o. Signal Name Pin N o. Signal Name 1 Video-Red 9 +5V 2 Video-Green 10 Ground 3 Video-Blue 11 N.C. 4 N.C. 12 DDC -Serial data 5 Detect Cable 13 H-sync 6 GND-R 14 V -s ync 7 GND-G 15 DDC -Serial clock 8 GND-B 24 -Pin Color Display Signal Cable Pin Number 24 -Pin Color Display Signal Cable [...]

59 19 -Pin Color Display Signal Cable Pin No. Signal Name Pin No. Signal Name Pin No. Signal Name 1 TMDS Data 2+ 9 TMDS Data 0 17 DDC/CEC Ground 2 TMDS Data 2 Shield 10 TMDS Clock + 18 +5V Power 3 TMDS Data 2 11 TMDS Clock Shield 19 Hot Plug Detect 4 TMDS Data 1+ 12 TMDS Clock 5 TMDS Data 1Shield 13 CEC 6 TMDS Data 1 14 Reserved (N.C. on device 7 T[...]

60 Plug and Pla y Plug & Play DDC2B Feature This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC ST ANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, c ommunicate additional information about its display capabilities. The DDC2B is a bi-directional data cha[...]

61 Regulation FCC Notice FCC Class B Radio Frequency Interference State ment W ARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested an d found to co mply w ith the limits for a Cl ass B digital devi ce, pursuant to Part 15 of the FCC Rules. T hese limits are designed to provide reasonable protection agai nst harmful interferenc e[...]

62 WEEE Declaration （ Optiona l ） Disposal of Was te Equipment by Users in Private Household in the European Union. Th is s ymbol on the product or on its packaging indicates that this product must not b e disposed of with your other household waste.Instead, it is your responsibility to dispose of your w aste equipment by handing it over to a d[...]

63 EPE A T Decl aration （ Optional ） EPEA T is a system to help purchasers in the public and private sectors evaluate, compare and select desktop computers, notebooks and monitors based on their environmental attributes. EPEA T also provides a clear and consistent set of performance criteria for the design of products, and provides an opportuni[...]

64 TCO DOCUMENT (FOR TCO CERTIFIED MODELS)[...]

65 Service W arrant y Statement for Euro pe LIMITED THREE-YEAR W ARRANTY* For AOC LCD M onitors sold within Europe, AOC International (Europe) B.V . warrants this product to be free from defects in material and workmanship for a period of Three (3) years after the original date of consumer purchase. During this period, AOC International (Europe) B.[...]

66 All AOC LCD M onitors are produced according to the ISO 9241-307 Class 1 pixel policy standards. If y our w arranty has expired, you still have access to all available serv ice options, but you w ill be responsible for the cost of service, including parts, labor , shipping (if any) and applicable taxes. AOC Certified or Authorized Service Center[...]

67 W arrant y Statement for Middle East and A f rica LIMITED ONE to THREE YEA RS W ARRANTY* For AOC LCD M onitors sold within the Middle East and Africa , AOC International (Europe) B .V . warrants this product to be free from defects in material and workmanship f or a period of One (1) to Three (3) years from the manufacture date depending on sale[...]

68 This limited warranty does not cover any of the product firmware or hardware that you or any third party have modified or altered; you bear the sole responsibility and liabil ity for any such modifications or alteration. All AOC LCD M onitors are produced according to the ISO 9241-307 Class 1 pixel policy standards. If y our w arranty has expire[...]

69 W arrant y Statement for North & South A merica (excl uding Brazil) WARR ANTY ST A TEMENT for AOC Color M onitors Including those Sold within North America as Specified Envision Peripherals, Inc. warrants this product to be free from defects in material and workmanship for a period of three (3) years for parts & labor and one (1) year fo[...]

70 ALL EXPRESS AND IMPLIED WARRANTIES FOR THIS PRODUCT (INCLUDING T HE WARR ANTIES OF MERCHANT ABIL ITY AND FI TNESS FOR A P ARTICULAR PURPOSE) ARE LIMITED IN DURA TION T O A PERIOD OF T HREE (3) YEARS FOR P ARTS AND LABOR AND ONE (1) YEAR FOR CR T TUBE OR LCD P ANEL FROM T HE ORIGINAL DA TE OF CONSUMER PURCHASE. NO WARRANTIES (EITHER EXPRESSED OR [...]