Asrock FM2A75M-ITX manuale d’uso

1 FM2A75M-ITX User Manual V ersion 1.0 Published September 2012 Copyright©2012 ASRock INC. All rights reserved.[...]

2 Copyright Notice: No part of this manual may be reproduced, transcribed, transmitted, or translated in any language, in any form or by any means, except duplication of documentation by the purchaser for backup purpose, without written consent of ASRock Inc. Products and corporate names appearing in this manual may or may not be regis- tered trade[...]

3 Contents 1. Introduction ................................................................ 5 1.1 Package Contents ......................................................... ............ 5 1.2 Specications ............................................................................. 6 1.3 Unique Features ..........................................[...]

4 3. UEFI SETUP UTILITY .................................................. 38 3.1 Introduction ................................................................................ 38 3.1.1 UEFI Menu Bar ................................................................ 38 3.1.2 Navigation Keys .............................................................[...]

5 1. Introduction Tha nk y ou f or p urcha sing ASRo ck FM2 A75M- ITX mo therbo ard, a r eliab le m oth- erboard produced under ASRock’s consistently stringent quality control. It delivers excellent performance with robust design conforming to ASRock’s commitment to quality and endurance. In this manual, chapter 1 and 2 contain introduction of [...]

6 1.2 Specications Platform - Mini-ITX Form Factor - All Solid Capacitor design CPU - Support for Socket FM2 100W processors - Supports AMD’s Cool ‘n’ Quiet TM T echnology - UMI-Link GEN2 Chipset - AMD A75 FCH (Hudson-D3) Memory - Dual Channel DDR3 Memory T echnology - 2 x DDR3 DIMM slots - Support DDR3 2600+(OC)/2400(OC)/2133(OC)/1866/160[...]

7 LAN - PCIE x1 Gigabit LAN 10/100/1000 Mb/s - Realtek RTL81 1 1E - Supports W ake-On-LAN - Supports LAN Cable Detection - Supports Energy Efcient Ethernet 802.3az - Supports PXE Rear Panel I/O I/O Panel - 1 x PS/2 Keyboard Port - 1 x D-Sub Port - 1 x HDMI Port - 1 x Optical SPDIF Out Port - 4 x Ready-to-Use USB 2.0 Ports - 1 x eSA T A3 Connecto[...]

8 Support CD - Drivers, Utilities, AntiVirus Software (T rial V ersion), CyberLink MediaEspresso 6.5 T rial, Google Chrome Browser and T oolbar Hardware - CPU T emperature Sensing Monitor - Chassis T emperature Sensing - CPU Fan T achometer - Chassis Fan T achometer - CPU Quiet Fan - CPU/Chassis Fan Multi-Speed Control - CASE OPEN detection - V olt[...]

9 CAUTION! 1. W h et he r 2 60 0 /2 4 00 / 21 33 / 18 6 6/ 16 0 0M H z m em o ry s p ee d i s supported depends on the CPU you adopt. If you want to adopt D DR 3 2 6 0 0/ 2 4 00 / 2 13 3 / 18 6 6 /1 6 00 m e mo r y m o d ul e o n t h is mo ther boa rd, p lea se re fer t o t he me mor y su ppo rt li st on ou r website for the compatible memory modul[...]

10 1.3 Unique Features ASRock Extreme T uning Utility (AXTU) A SRock Extre me T uning Utility (AXTU) is an all-i n-one tool to ne-tu ne di f fe rent syste m fun ctions in a user -friendl y int erface, whic h in clude s Ha rdware Moni tor , Fa n Co ntrol, Ove rclock ing, OC DNA, IES and XFast RAM. In Hardware Monitor , it shows the major readings of[...]

1 1 ASRock APP Charger I f y o u d es i r e a f as t e r, l e ss r es t r ic t e d w a y o f c h a rg i n g y o u r Apple device s, su ch as iPhon e/iPad/iP od T ouch, ASRoc k has prepared a wonderful solution for you - ASRock APP Charger . Si mpl y in sta ll t he AP P C har ge r d riv er, i t m ake s y ou r i Pho ne charge much quickly from your c[...]

12 ASRock Crashless BIOS AS Ro ck Cr as hl es s B IO S a ll ow s u se rs to u pd at e t he ir B IO S without fear of failing. If power loss occurs during the BIOS up- date process, ASRock Crashless BIOS will automatically nish the BIOS update procedure after regaining power. Please note that BIOS les need to be placed in the root directory of[...]

13 ASRock Dehumidier Function Users may prevent motherboard damages due to dampness by enabling “Dehu midier Func tion”. When enabling Dehu midier Function, the computer will power on automatically to dehumidi- fy the system after entering S4/S5 state. ASRock Easy RAID Installer A SRo ck Ea sy RA ID I nsta lle r c an he lp yo u t o c o[...]

14 1.4 Motherboard Layout 1 CPU Fan Connector (CPU_F AN1) 13 SA T A3 Connector (SA T A3_4) 2 CPU Fan Connector (CPU_F AN2) 14 SA T A3 Connector (SA T A3_1) 3 A TX Power Connector (A TXPWR1) 15 SA T A3 Connector (SA T A3_2) 4 Chassis Speaker Header (SPEAKER1) 16 Southbridge Controller 5 2 x 240-pin DDR3 DIMM Slots 17 SPI Flash Memory (64Mb) (Dual Ch[...]

15 1.5 I/O Panel ** There are two LED next to the LAN port. Please refer to the table below for the LAN port LED indications. LAN Port LED Indications Activity/Link LED SPEED LED Status Description Status Description Off No Link Of f 10Mbps connection Blinking Data Activity Orange 100Mbps connection On Link Green 1Gbps connection * 1 USB 2.0 Ports [...]

16 T o enable Multi-Streaming function, you need to connect a front panel audio cable to the front panel audio header . After restarting your computer , you will nd “Mixer” tool on your system. Please select “ Mixer T oolBox” , cl ick “Enab le playba ck multi- streamin g”, and c lick “ok ”. Choose “2CH”, “4CH”, “6CH”,[...]

17 2. Installation Thi s i s a M ini- ITX f orm f acto r mo the rboa rd. Be fore yo u in stal l t he mo ther boar d, study the conguration of your chassis to ensure that the motherboard ts into it. Pre-installation Precautions T ak e no te of th e f ollo win g p reca utio ns be for e y ou in stal l m othe rbo ard components or change any moth[...]

18 2.1 CPU Installation Step 1. Unlock the socket by lifting the lever up to a 90 o angle. Step 2. Position the CPU directly above the socket such that the CPU corner with the golden triangle matches the socket corner with a small triangle. Step 3. Carefully insert the CPU into the socket until it ts in place. The CPU ts only in one correct o[...]

19 2.3 Installation of Memory Modules (DIMM) This mot herboar d pr ovides t wo 2 40-pin D DR3 (Dou ble Data R ate 3) DI MM slots , and su pport s Dual C hannel M emory T ec hnolog y . F or dua l chan nel co nfigu ratio n, yo u alw ays n eed to i nst all tw o ide nti cal (t he sa me b ran d, s peed , si ze a nd ch ip- type) memory modules in the DDR[...]

20 2.4 Expansion Slot (PCI Express Slot) There is 1 PCI Express slot on this motherboard. PCIE Slot: PCIE1 (PCIE x16 slot) is used for PCI Express x16 lane width graphics cards. Installing an expansion card Step 1. Before installing the expansion card, please make sure that the power supply is switched off or the power cord is unplugged. Please rea[...]

21 2.5 AMD Dual Graphics Operation Guide This motherboard supports AMD Dual Graphics feature. AMD Dual Graphics brings multi-GPU performance capabilities by enabling an AMD A75 FCH (Hudson-D3) integrated graphics processor and a discrete graphics processor to operate simultaneously with combined output to a single display for blisteringly-fast fram[...]

22 * Dual Graphics appearing here is a registered trademark of AMD T echnologies Inc., and is used only for identication or explanation and to the owners’ benet, without intent to infringe. * For further information of AMD Dual Graphics technology , please check AMD website for up dates and details. Step 9. Click “Enable CrossFire TM ” [...]

23 2. If you have installed onboard VGA driver from our support CD to your system already , you can freely enjoy the benets of dual monitor function after your system boots. If you haven’t installed onboard VGA driver yet, please install onboard VGA driver from our support CD to your system and restart your computer . 2.6 Dual Monitor and Surr[...]

24 Surround Display Feature This motherboard supports surround display upgrade. With the internal VGA output support (D-Sub and HDMI) and external add-on PCI Express VGA cards, you can easily enjoy the benets of surround display feature. Please refer to the following steps to set up a surround display environment: 1. Install the PCI Express VGA [...]

25 HDCP Function HDCP f unction is supported on t his motherboard. T o use HDCP function with this motherboard, you need to adopt the monitor that supports HDCP function as well. Therefore, you can enjoy the superior display quality with high-denition HDCP encryption contents. Please refer to below instruction for more details about HDCP functio[...]

26 USB 2.0 header (9-pin, black) CIR header (4-pin, gray) 2.7 ASRock Smart Remote Installation Guide AS Roc k S mar t Re mot e i s o nly u sed fo r AS Roc k m oth erb oar d wi th C IR he ade r . Plea se ref er to b elow pr ocedur es for th e q uick i nstall ation a nd usa ge of ASR ock Smart Remote. Step1. Find the CIR header located next to the US[...]

27 * ASRock Smart Remote is only supported by some of ASRock motherboards. Please refer to ASRock website for the motherboard support list: http://www .asrock.com 1. Only one of the front USB port can support CIR function. When the CIR function is enabled, the other port will remain USB function. 2. Multi-Angle CIR Receiver is used for front USB on[...]

28 2.8 Jumpers Setup T h e i l l u s t r a t io n s h o w s h o w j u m p e r s a r e setup. When the jumper cap is placed on pins, the jumper is “Short”. If no jumper cap is placed on pins, the jumper is “Open”. The i l lu s t r at i o n s h ow s a 3 - pi n j u m p er w h os e pin1 and pin2 are “Short” when jumper cap is placed on thes[...]

29 2.9 Onboard Headers and Connectors Onboar d headers and con nectors a re NOT jum pers. Do NOT place jumper caps over these headers and connectors. Placing jumper caps over the headers and connectors will cause permanent damage of the motherboard! Serial A T A3 Connectors These four Serial A T A3 (SA T A3_1: see p.14, No. 14) (SA T A3) connectors[...]

30 Front Panel Audio Header This is an interface for the front (9-pin HD_AUDIO1) panel audio cable that allows (see p.14 No. 21) convenient connection and control of audio devices. Consumer Infrared Module Header This header can be used to (4-pin CIR1) connect the remote (see p.14 No. 1 1) controller receiver . J _ S EN SE O U T 2_ L 1 M I C _R ET [...]

31 Chassis Speaker Header Please connect the chassis (4-pin SPEAKER 1) speaker to this header . (see p.14 No. 4) PLED (System Power LED): Connect to the power status indicator on the chassis front panel. The LE D is o n wh en th e s yst em i s o per at ing . T he LE D k eep s b lin kin g when the sys-tem is in S1 sleep state. The LED is off when th[...]

32 A TX Power Connector Please connect an A TX power (24-pin A TXPWR1) supply to this connector . (see p.14 No. 3) 24 13 12 1 Though this motherboard provides 24-pin A TX power connector, it can still work if you adopt a traditional 20-pin A TX power supply . T o use the 20-pin A TX power supply , please plug your power supply along with Pin 1 and [...]

33 2.10 Serial A T A3 (SA T A3) Hard Disks Installation This motherboard adopts AMD A75 FCH (Hudson-D3) chipset that supports Serial A T A3 (SA T A3) hard disks and RAID (RAID 0, RAID 1 and RAID 10) functions. Y ou may install SA T A3 hard disks on this motherboard for internal storage devices. This section will guide you to install the SA T A3 har[...]

34 Caution 1. Without SA T A 15-pin power connector interface, the SA T A3 Hot Plug cannot be processed. 2. Even some SA T A3 HDDs provide both SA T A 15-pin power connector and IDE 1x4-pin conventional power connector interfaces, the IDE 1x4-pin conventional power connector interface is denitely not able to support Hot Plug and will cause the H[...]

35 How to Hot Plug a SA T A3 HDD: Points of attention, before you process the Hot Plug: Please do follow below instruction sequence to process the Hot Plug, improper procedure will cause the SA T A3 HDD damage and data loss. Connect SA T A 15-pin power cable connector (Black) end to SA T A3 HDD. How to Hot Unplug a SA T A3 HDD: Points of attention,[...]

36 2.13 Driver Installation Guide T o install the drivers to your system, please insert the support CD to your optical drive rst. Then, the drivers compatible to your system can be auto-detected and listed on the support CD driver page. Please follow the order from up to bottom side to install those required drivers. Therefore, the drivers you i[...]

37 STEP 1: Set up UEFI. A. Enter UEFI SETUP UTILITY Advanced screen Storage Conguration. B. Set the “SA T A Mode” option to [IDE]. STEP 2: Install Windows ® 8 / 8 64-bit / 7 / 7 64-bit / Vista TM / Vista TM 64-bit OS on your system. Using SA T A3 HDDs without NCQ and Hot Plug functions (IDE mode) 2.15 Installing Windows ® 8 / 8 64-bit / 7 [...]

38 3. UEFI SETUP UTILITY 3.1 Introduction ASRock Inter active UEF I is a blend of sy stem cong uration t ools, coo l sound ef- fects and stunning visuals. Not only will it make BIOS setup less difcult but also a lot more amusing. This section explains how to use the UEFI SETUP UTILITY to congure your system. The UEFI chip on the motherboar[...]

39 3.1.2 Navigation Keys Please check the following table for the function description of each navigation key . Navigation Key(s) Function Description / Moves cursor left or right to select Screens / Moves cursor up or down to select items + / - T o change option for the selected items <T ab> Switch to next function <Enter> T o bring up[...]

40 3.3 OC T weaker Screen In the OC T weaker screen, you can set up overclocking features. EZ OC Mode Y ou can use this option to adjust EZ overclocking setting. Please note that overclocing may cause damage to your components and motherboard. It should be done at your own risk and expense. CPU Conguration Overclock Mode U se t hi s t o s el ec [...]

41 Multiplier/V oltage Change This item is set to [Auto] by default. If it is set to [Manual], you may adjust the value of Processor Frequency and Processor V oltage. However , it is recommended to keep the default value for system stability . Boost Frequency Multiplier For safety and system stability , it is not recommended to adjust the value of [...]

42 DRAM Timing Control DRAM Slot Use this item to view SPD data. DRAM Timing Control Use this item to control DRAM timing. Power Down Enable Use this item to enable or disable DDR power down mode. Bank Interleaving Interleaving allows memory accesses to be spread out over banks on the same node, or accross nodes, decreasing access contention. Chann[...]

43 3.4 Advanced Screen In this section, you may set the congurations for the following items: CPU Congu- ration, Nouth Bridge Conguration, South Bridge Conguration, Storage Congura- tion, ACPI Conguration and USB Conguration. Setting wrong values in this section may cause the system to malfunction.[...]

44 3.4.1 CPU Conguration Core C6 Mode Use this item to enable or disable Core C6 mode. The default value is [Enabled].  Package C6 Mode This item appears only when you enable the item “Core C6 Mode”. Use this item to enable or disable Package C6 mode. The default value is [Dis- abled]. Cool ‘n’ Quiet Use this item to enable or disable[...]

45 3.4.2 North Bridge Conguration Primary Graphics Adapter This item will switch the PCI Bus scanning order while searching for video card. It allows you to select the type of Primary VGA in case of multiple video controllers. The default value of this feature is [PCI Express]. Con- guration options: [Onboard] and [PCI Express]. Share Memory [...]

46 3.4.3 South Bridge Conguration Onboard HD Audio Select [Enabled] or [Disabled] for the onboard HD Audio feature. The default value is [Enabled]. Front Panel Select [Auto] or [Disabled] for the onboard HD Audio Front Panel. On/Off Play Use this item to en able or d isable O n/Off Pla y T echno logy . Th e de fault value is [Enabled]. When On/O[...]

47 3.4.4 Storage Conguration SA T A Controller Use this item to enable or disable the “SA T A Controller” feature. SA T A Mode Use th is item t o adjust SA T A Mode. The d efault va lue of th is option is [AHCI Mode]. Conguration options: [AHCI Mode], [RAID Mode] and [IDE Mode]. If you set this item to RAID mode, it is suggested to instal[...]

48 3.4.5 ACPI Conguration Suspend to RAM Use this item to select whether to auto-detect or disable the Suspend-to- RAM feature. Select [Auto] will enable this feature if the OS supports it. Check Ready Bit Use this item to enable or disable the feature Check Ready Bit. Restore on AC/Power Loss This allows you to set the power state after an unex[...]

49 [Enabled]. Please set this option to [Enabled] if you plan to use this moth- erboard to submit Windows ® certication. CSM Please disable CSM when you enable Fast Boot option. The default value is [Enabled]. 3.4.6 USB Conguration USB 2.0 Controller Use this item to enable or disable the use of USB 2.0 controller . A75 USB 3.0 Controller Us[...]

50 3.5 T ool Sound Effect Enable or disable sound effects in the setup utility . System Browser System Browser can let you easily check your current system congura- tion in UEFI setup. OMG(Online Management Guard) Administrators are able to establish an internet curfew or restrict internet access at specied times via OMG. Y ou may schedule th[...]

51 Internet Flash Int erne t F lash sea rch es f or av aila ble U EFI fi rmwa re up date s f rom ou r servers. In other words, the system can auto-detect the latest UEFI from our servers and ash them without entering Windows OS. Please note that you must be running on a DHCP congured computer in order to en- able this function. Network Con[...]

52 Would you like to save current setting user defaults? In this option, you are allowed to load and save three user defaults according to your own requirements.[...]

53 CPU Fan 1 & 2 Setting Thi s allo ws you to set the C PU fan 1 & 2 speed . Con gurat ion op tions: [Full On] and [Automatic Mode]. The default is value [Full On]. Chassis Fan 1 Setting This allows you t o set the chassis fan 1 speed. Con guration options: [Full On], [Manual Mode] and [Automatic Mode]. The default is value [Full On].[...]

54 3.7 Boot Screen In this section, it will display the available devices on your system for you to cong- ure the boot settings and the boot priority . Fast Boot Fa st B oot m ini mize s y our c ompu ter ’s bo ot ti me. Th ere a re t hre e c on- guration options: [Disabled], [Fast] and [Ultra Fast]. The default value is [Disabled]. Please r[...]

55 Full Screen Logo Use this item to enable or disable OEM Logo. The default value is [En- abled]. AddOn ROM Display Us e this option to adj ust AddOn RO M Displ ay . If yo u enabl e the o ption “ Full Screen Logo” but you want to see the AddOn ROM information when the syste m bo ots, plea se se lect [En abled]. C ongurat ion opti ons: [Ena [...]

56 3.8 Security Screen In this section, you may set or change the supervisor/user password for the system. For the user password, you may also clear it. Secure Boot Use this to enable or disable Secure Boot. The default value is [Disabled].[...]

57 3.9 Exit Screen Save Changes and Exit When you select this option, it will pop-out the following message, “Save conguration changes and exit setup?” Select [OK] to save the changes and exit the UEFI SETUP UTILITY . Discard Changes and Exit When y ou select this op tion, it will pop- out the f ollowing message, “Discard changes and exit [...]

58 4. Software Support 4.1 Install Operating System Th is mo th er bo ar d s up po rt s v ar io us M ic ro so ft ® W in dow s ® o pe rat in g s yst em s: 8 / 8 6 4-b it / 7 / 7 64 -bi t / Vis ta TM / Vi sta TM 64 -bi t. B eca use m oth erb oar d se tti ngs and h ardware o ptions v ary , u se t he se tup proc edures i n thi s ch apter for gene ral[...]

59 Installing OS on a HDD Larger Than 2TB This motherboard is adopting UEFI BIOS that allows Windows ® OS to be installed on a large size HDD (>2TB). Please follow below procedure to install the operating system. 1. Please make sure to use Windows ® Vista TM 64-bit (with SP1 or above) , Windows ® 7 64-bit or Windows ® 8 64-bit . 2. Press <[...]

60 Installing OS on a HDD Larger Than 2TB in RAID Mode This motherboard is adopting UEFI BIOS that allows Windows ® OS to be installed on a large size HDD (>2TB). Please follow below procedure to install the operating system. 1. Please make sure to use Windows ® Vista TM 64-bit (with SP1 or above) , Windows ® 7 64-bit or Windows ® 8 64-bit .[...]

61 7. And then key in drvcfg –s [Drv number] [Ctrl number] to enter Raid Utility . For example: key in drvcfg –s 4E B5 . 8. Choose Logical Drive Main Menu to set up Raid Drive. 9. Choose Logical Drive Create Menu to create a Raid Drive. 10. Choose Usable Physical Drive List to select Raid HDD.[...]

62 1 1. Press Space on keyboard to toggle checkbox. 12. Choose Ld Size setting , and key in the Raid size. 13. After set up Raid size, please click Start to Create . 14. Press <F10> to exit Utility . 15. During reboot, please press <F1 1> to enter Boot Manual. Choose UEFI: SCSI CD/DVD Drive . * This option only shows on Windows ® 8 64-[...]

63 16. Follow Windows ® Installation Guide to install OS. If you ins tall W indow s ® 8 6 4-bi t / 7 6 4-bi t / Vis ta TM 64 -bit i n a la rge har d disk (ex. Disk volume > 2TB), it may take more time to boot into Windows ® or in st al l d riv er /ut il it ies . I f yo u en co unt er th is pr ob lem , y ou wi ll ne ed to following instruction[...]

64 B. Disable “V olume Shadow Copy” service. a. T ype “computer management” in the Start Menu, then press “Enter”. b. Go to “Ser vices and Applicati ons>Service s”; The n double cl ick “V olume Shadow Copy”. c. Set “Startup type” to “Disable” then Click “OK”.[...]

65 17. Finish. C. Reboot your system. D. After reboot, please start to install motherboard drivers and utilities. Windows ® 8 64-bit / 7 64-bit: A. Please request the hotx KB2505454 thru this link: http://support.microsoft.com/kb/2505454/ B. After installing Windows ® 8 64-bit / 7 64-bit, install the hotx kb2505454. (This may take long time[...]