ATEN Technology KL3116M manuale d’uso

LCD KVM Switch KL31 16 / KL31 16T User Manual www.aten.com kl3116-3116t.book Pag e i Wednesday, June 1, 2011 1:28 PM[...]

KL3116 / KL3116T User Manual ii FCC Information This is an FCC Class A product. In a domestic environment this product may cause radio interference in which cas e the user may be required to tak e adequate measures. This equipment has been test ed and found to comply with the limit s for a Class A digital device, pursuant to Part 15 of the FCC Rule[...]

KL3116 / KL3116T User Manual iii User Information Online Registration Be sure to register your product at our online support center: T elephone Support For telephone support, call this number: User Notice All information, docum entation, and specifications contained in this manual are subject to change without prior no tification by the manufacture[...]

KL3116 / KL3116T User Manual iv Package Content s Basic Package The basic KL3116 / KL3116T package consists of: 1 KL3116 / KL3116 T LCD KVM Switch with Standard Rack Mo unt Kit 2 Custom KVM Cable Sets 1 Custom Console Cable Set 1 Firmware Upgrade Cable 1P o w e r C o r d 1 Grounding Wire 1 User Manual* 1 Quick Start Guide Optional Equipment Dependi[...]

KL3116 / KL3116T User Manual v Content s FCC Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii RoHS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ii SJ/T 11364-2006. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

KL3116 / KL3116T User Manual vi LCD OSD Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 LCD OSD Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 LCD Adjustment Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 LCD Power Button . . . [...]

KL3116 / KL3116T User Manual vii Hotkey Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Alternate Hot key Invocation Ke ys . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Alternate OSD Invocation Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52 Port OS Configuration . .[...]

KL3116 / KL3116T User Manual viii About This Manual This user manual is provided to help you ge t the mo st from your KL3116 / KL3116T. It covers all aspects of inst allation, configuratio n and operation. An overview of the information found in the manual is provided below. Overview Chapter 1, Introduction, introduces you to the KL311 6 / KL3116T [...]

KL3116 / KL3116T User Manual ix Conventions This manual uses the following conv entio ns: Product Information For information about all ALTUSEN products and ho w they can help you connect without limi ts, visit ALTUSEN on the W eb or contact an ALTUSEN Authorized Reseller. Visit ALTUSEN on the Web for a list of location s and telephone numbers. Mon[...]

KL3116 / KL3116T User Manual x This Page Intentionally Left Blank kl3116-3116t.book Pag e x Wednesday, June 1, 2011 1:28 PM[...]

1 Chapter 1 Introduction Overview The KL3116 / KL3116T Dual Rail LCD KVM Sw itch is an integrated LCD console and KVM (keyboard, video, and mouse) switch that offers secure access to 16 attached computers and mounts in only 1U of rack space. It features an independently retractable 17" LCD mon ito r and keyboard with built-in touchpad. To maxi[...]

KL3116 / KL3116T User Manual 2 A convenient Auto Scan feature also permits automatic scanning and monitoring of th e activities of all computers running on the instal lation one by one. Features  Integrated KVM console with 17" LCD monitor in a Hideaw ay ™ housing  T ouchscreen model (K L31 16T) offers convenient operation withou t ext[...]

Chapter 1. Introduction 3  Administrator/user password authorization for enhanced security protection; administrator access rights synchronized between master and slave stations  T wo level password secu rit y – authorized users view and control computers  Supports one administrator and four user accounts with separate profiles  Broad[...]

KL3116 / KL3116T User Manual 4 Requirement s External Console The following hardware com pon ents ar e required for the external console:  A VGA, SVGA, or multisync monito r capable of displayin g the highest resolution provided by any com put er in th e installation.  A USB or PS/2 keyboard and mouse Computers The following equipmen t must b[...]

Chapter 1. Introduction 5 Operating Systems Supported operating systems are shown in the table, below: OS Ve r s i o n X86 Microsoft Dos 6.22 (Does not suppo rt USB), NT (Does not support USB), 2000 and higher Linux RedHat 9.0, Fedora and higher , R HEL AS 4, RHEL 5, RHEL SUSE 10 and higher , OpenSUSE 10.2; SLES 10 SP1 Debian 3.1, 4.0 Ubuntu 7.04, [...]

KL3116 / KL3116T User Manual 6 Component s Front V iew No. Component Des cription 1 Upper Handle Pull to slide the LCD modu le out; push to slide the module in. See item 7 in this table and page 19 for more details on sliding the console in and out. 2 LCD Module See LCD Module , page 8. 3 Keyboard Module See Keyboard Mo dule , page 7. 4 Lower Handl[...]

Chapter 1. Introduction 7 Keyboard Module No. Component Descript ion 9 Lock LEDs & Reset Switch The Num Lock, Caps Lock, Scroll Lock LEDs are located here. A Reset Switch is locate d to the right of the Lock LEDs. Press this recessed switch in with a small object to perform a system reset. 10 S tation Selection Area  The LED displays the sta[...]

KL3116 / KL3116T User Manual 8 LCD Module No. Component Des cription 16 LCD Display After sliding the LCD module out, flip up the cover to access the LCD monitor . 17 KVM OSD Button As an alternative to us ing the OSD h otkey , press this button to access the OSD when viewing a port. Note: This button is available on the KL31 16T mo del only . 18 L[...]

Chapter 1. Introduction 9 Rear View No. Component Descript ion 1 Grounding T erminal The grounding wire used to ground the switch attaches here. 2 Power Socket This is a standard 3-pin AC power socket. The power cord from an AC source plugs in here. 3 Power Switch This standard rocker switch powers the unit On and Off. 4 Daisy Chain Port When daisy[...]

KL3116 / KL3116T User Manual 10 This Page Intentionally Left Blank kl3116-3116t.book Pag e 10 Wednesday, June 1, 2011 1:28 PM[...]

11 Chapter 2 Hardware Setup Before you Begin 1. Important safety informati on r egardin g the placement of thi s device is provided on page 63. Please review it before proceeding. 2. Make sure that power to all the devices you will be connecting up has been turned off. Y ou must unplug the po wer cords of any computers that have the Keyboard Power [...]

KL3116 / KL3116T User Manual 12 St andard Rack Mounting A standard rack mounting kit is provided with your KL3116 / KL3116T. The kit enables the switch to be mounted in rack with a depth of 42–77 cm. Note: 1. It takes two people to mount the sw itch: one to hold it in place, the other to screw it in. 2. Th e rack mounti ng ki t does not include c[...]

Chapter 2. Hardware Setup 13 To rack mount the sw itch, do the following: 1. While one person positions the switch in the rack and hol ds it in place, the second person loosely screws the front brackets to the rack. 2. While the first person still holds th e switch in place, the second person slides the L brackets into the switch 's side mount[...]

KL3116 / KL3116T User Manual 14 Single St age Inst allation In a single stage installation, there ar e no additional switches daisy chained down from the first unit. To set up a single level instal lation, refer to the installation diagrams beginning on pag e 15 (the numbers in the diagram correspond to the numbers of the installati on steps) and d[...]

Chapter 2. Hardware Setup 15 Single St age Inst allation Diagram External Console Connection 1 2 3 4 6 5 VGA USB PS/2 2 kl3116-3116t.book Pag e 15 Wednesday, June 1, 2011 1:28 PM[...]

KL3116 / KL3116T User Manual 16 USB Cable Connec tion PS/2 Cable Connection 4 4 kl3116-3116t.book Pag e 16 Wednesday, June 1, 2011 1:28 PM[...]

Chapter 2. Hardware Setup 17 Daisy Chain Inst allat ion To control even more comp uters, up to 31 addi tion a l compatible switches can be daisy chained fro m the KL3116 / KL311 6T. See Sup ported KVM Switches , page 69 for a list of compatible ATEN KVM switches to be used when daisy chaining. In a complete installation, as many as 512 com put ers [...]

KL3116 / KL3116T User Manual 18 Daisy Chain Inst allation Diagram CHAIN IN CHAIN OUT KL3116 / KL3116T CHAIN OUT CHAIN IN CHAIN OUT kl3116-3116t.book Pag e 18 Wednesday, June 1, 2011 1:28 PM[...]

19 Chapter 3 Basic Operation Opening the Console The KL3116 / KL3 116T's console consists of two modules: an LCD display module located under the top cover and a keyboard/touchpad module belo w the LCD module. The modules can slid e together, or indepe ndently. This allows you to have the LCD display availabl e for viewing while the keyboard /[...]

KL3116 / KL3116T User Manual 20 2. Pull the top panel all the way out until it clicks into place. 3. Rotate the top panel all the way up to expose the LCD screen. kl3116-3116t.book Pag e 20 Wednesday, June 1, 2011 1:28 PM[...]

Chapter 3. Basic Operation 21 4. Reach underneath and pul l the keyboard module all the way out until it clicks into place. Opening T ogether Refer to the d iagrams in the Opening Separately section as you do the following: 1. Pull the release catch and pull the top and bottom panels out un til the key- board module clicks into place. (Once the con[...]

KL3116 / KL3116T User Manual 22 Operating Precautions RIGHT! Rest your hands and arms lightly on the keyboard module as you work. WRONG!  DO NOT lean your body weight on the keyboard module.  DO NOT place heavy objects on the keyboard module. The maximum load bearing capacity of the keyboard module is 30kg. Failure to heed the information bel[...]

Chapter 3. Basic Operation 23 Closing the Console 1. Pull the release catches located on either sid e of the keyboard t oward you to release the keyboard module, then slide the module slight ly in. 2. Let go of the catches. Using the front handle, push the keyboard module all the way in. kl3116-3116t.book Pag e 23 Wednesday, June 1, 2011 1:28 PM[...]

KL3116 / KL3116T User Manual 24 3. Rotate the LCD module all the way down, then pull the rear catches to release the LCD module. 4. Using the front handle, push the module all the way in. kl3116-3116t.book Pag e 24 Wednesday, June 1, 2011 1:28 PM[...]

Chapter 3. Basic Operation 25 LCD OSD Configuration LCD OSD Buttons The LCD OSD allows you to set up an d configure the LC D display. Four buttons are used to perform the configur ation, as described in the table belo w: Button Function MENU When you have not entere d the LCD OSD Menu function, pressing this button invokes the Menu function and bri[...]

KL3116 / KL3116T User Manual 26 LCD Adjustment Settings The LCD OSD adjustment setting s are described in the table below: LCD Power Button Press the LCD Power button to turn the LCD monitor on and off. The button lights up when the LCD monitor is Off. When the LCD monitor is On, the button light turns off. Note: This function only affects the moni[...]

Chapter 3. Basic Operation 27 Hot Plugging The KL3116 / KL3116T supports hot pluggin g – components can be removed and added back into the install ation by unplugging t heir cables from the ports without the need to shut the unit down. In order for hot pluggi ng to wo rk properly, however, the proced ures described below must be followed: Switchi[...]

KL3116 / KL3116T User Manual 28 Port Selection The KL3116 / KL3116T prov ides three port selectio n methods to access the computers on the installatio n: Manu al Port Switching, OSD Port Switching, and Hotkey Port Switching. An add itional method is availabl e for the KL3116T, which is the T ouch Screen Icon .  For manual port switching, use the[...]

Chapter 3. Basic Operation 29 T ouch Screen Icon Use the T ouch Screen Icon for port selection, as well as mouse right button and scroll button emulations. It appears on the right side of the screen and performs the following functions:  T ouch Panel Port Selection icon – press this icon to invoke full screen OSD for port selectio n. Note: The[...]

KL3116 / KL3116T User Manual 30  Press and hold the [Shift] key to enable Mouse Right Button Emulation . While the [Shift] key is pressed dow n, you should see the menu / action available for the mouse right-click button when pressing the touchscreen or clicking on an application’ s icon. This procedure is a toggle. Release [Shift] to disable [...]

31 Chapter 4 OSD Operation OSD Overview The on-screen display (OSD) is a menu driven method to handle com puter control and switchi ng operations. All pr ocedures start from the OSD main screen. There are two ways to invoke the OSD: 1. T ap the OSD invocation key on the keybo ard (see page 79), or 2. T ap the [Scroll Lock] key twice. Note: 1. Tappi[...]

KL3116 / KL3116T User Manual 32 OSD Main Screen When you invoke the OSD, a screen similar to the one below appears:  The diagram depicts the administrator's main screen. The user main screen does not show the F4 and F6 functions, since these are reserved for the administrator and can't be accessed by users.  The OSD always sta rt s [...]

Chapter 4. OSD Operation 33 OSD Main Screen Headings The table below describes th e OSD Main Screen headings. OSD Navigation  T o dismiss the menu, and deactivate OSD, click the X at the upper right corner of the OSD window; or press [Esc] .  T o Logout, cl ick F8 or the Z Z Z symbol at the top of the main screen, or press [F8] .  T o move[...]

KL3116 / KL3116T User Manual 34 OSD Functions OSD functions are used to configure an d control the OSD. For example, you can: rapidly switch to any port, scan selected ports only, limit the list you wish to view, designate a port as a quick view port, create or edit a port name, or make OSD setting adjustments. To access an OSD function: 1. Either [...]

Chapter 4. OSD Operation 35 F2: LIST This function lets y ou broaden or na rrow the scope of the ports the OSD displays on the main screen. Many of the OSD functions only operate on the computers currently selected for listing on the m ain screen with this fu nction. The submenu choices and their meanin gs are given in the table below: Double click[...]

KL3116 / KL3116T User Manual 36 F3: SET This function allows the administrator and each user to set up their own, individual, working environm ent. A sep arate profile for each is stored by the OSD and is activated according to th e username provided during login. To change a setting: 1. Double click it; or move the highlight bar to it, th en press[...]

Chapter 4. OSD Operation 37 (Continues on next page.) Setting Function SCAN–SKIP MODE Selects which computers will be accessed under skip mode (see F5: SKP , page 43), and Auto Scan mode (see F7: SCAN , page 45. Choices are: ALL - All the ports which have been set accessible (see SET ACCESSIBLE PORTS , page 40); QUICK VIEW - Only those ports whic[...]

KL3116 / KL3116T User Manual 38 (Continued from previous page.) Setting Functio n TWO-POINT CALIBRA TION Note: This fun ction is available on the KL31 16T only . Calibrates the touchscreen for use on ports with a connected computer . Note: 1. Before using two-point calibration, be sure to select a port with a working computer attached, otherwise th[...]

Chapter 4. OSD Operation 39 ENABLE / DISABLE TOUCSCREEN Note: This function is avail able on the KL31 16T only . Use this function to enable or disable th e T o uch Screen Icon that appears on the right side of the screen. Enabled: When the T ou ch Screen Icon is enabled, simply drag the mouse cursor to the right side of the screen to make it appea[...]

KL3116 / KL3116T User Manual 40 F4: ADM F4 is an administrator only function. It allows t he administrator to confi gure and control the overall oper ation of the OSD. To change a setting, double click it; or use the up and down a rrow keys to m ove the hi ghlight bar to it then press [Enter] . After you select an item, a submenu w ith further ch o[...]

Chapter 4. OSD Operation 41 (Continued from previous page.) Setting Function EDIT PORT NAMES T o help r emember which computer is attached to a particular port, every port can be given a name. This function allows the administrator to create, modify , or delete port na mes. T o edit a por t name: 1. Click the port, or use the navigation keys to mov[...]

KL3116 / KL3116T User Manual 42 Setting Functio n RESET ST A TION IDS If you change the position of one of th e stations in the daisy chain, the OSD settings will no longer corre spond to the new location. This function directs the OSD to rescan the station positions of the entire installation and updates the OSD so that the OSD station information[...]

Chapter 4. OSD Operation 43 F5: SKP This function enables you to easily skip backw ard or forward – switching the console focus from the curr ently active comput er port to the previous or next available one.  The selection of which computers are available for skip mode switching is made with the Scan–Skip m ode setti ng und er the F3: SET f[...]

KL3116 / KL3116T User Manual 44 F6: BRC F6 is an administrato r only function. When t his function is in effect, commands sent from the console are broadcas t to all available computers on the installation. This function is particu larly useful for o perations that need to be performed on multiple comp uters, such as performing a system wide shutdo[...]

Chapter 4. OSD Operation 45 F7: SCAN This function allows you to auto mati cally switch among the availabl e computers at regular intervals so that you can monitor thei r activity without having to take the trouble of switching yourself.  The selection of computers to be included for auto scanning is made w ith the Scan–S kip mode set ting und[...]

KL3116 / KL3116T User Manual 46 This Page Intentionally Left Blank kl3116-3116t.book Pag e 46 Wednesday, June 1, 2011 1:28 PM[...]

47 Chapter 5 Hotkey Operation Overview For speed and conveni ence, the KL3116 / K L3116T provides a hotkey function that allows you to swi tch ports and ma ke som e configuration settings d irectly from the keyboard. Hotkey port control allows you to provide KVM focus to a particular computer directly from the keyboard. The KL3116 / KL3116 T provid[...]

KL3116 / KL3116T User Manual 48 Hotkey Port Access Invoking Hotkey Mode All Hotkey operations begi n by inv oking Hotkey Mode . Invoking Hotkey Mode takes the following three steps: 1. Ho ld down the [Num Lock] key 2. Press and release the [Minus] key 3. Release the [Num Lock] key Note: 1. The minus key must be released within one half seco nd, oth[...]

Chapter 5. Hotkey Operation 49 Selecting t he Active Port Each KVM port is assigned a port ID (see Port ID Numbering , page 28). You can directly access any computer on the installation with a hotkey combination that specifies the Port ID of the KVM port that the computer is connected to. The steps involved are: 1. Invoke hotkey mode (see page 48 )[...]

KL3116 / KL3116T User Manual 50 Auto Scan Mode Auto Scan automatically switches, at regu lar intervals, among all the KVM ports that have been designated as accessible under Scan–Skip Mode , so that their activity can be mon itored automatically. See SCAN–SKIP MODE , page 37 for mo re information. Invoking Auto Scan : To start Auto Scan , key i[...]

Chapter 5. Hotkey Operation 51 Skip Mode This feature allows you to switch betw een computers in orde r to monitor th em manually. You can dwell on a parti cular port for as long or as little as you like – as opposed to auto scanning, wh ich automatically switches after a fixed interval. To invoke Skip mode, key in the following hot key combinati[...]

KL3116 / KL3116T User Manual 52 Hotkey Configuration Alternate Hotkey Invocation Keys An alternate set of Hotkey Invocation key s is provided in case the default set conflicts wi th progra ms running on the compute rs. To switch to the alternate Hotkey Invocation set, do the followi ng: 1. Invoke hotkey mode (see page 48). 2. Press and release the [...]

Chapter 5. Hotkey Operation 53 Port OS Configuration A port’s operating system can be change d to match the operating syst em of an attached computer. To change a port’s operating system , key in the following hotkey combination: 1. Invoke hotkey mode (see page 48 ). 2. Key in [Function] , where [Fun ct ion ] refers to one of the function keys [...]

KL3116 / KL3116T User Manual 54 Computer Keyboard / Mouse Reset If the keyboard or mouse cease to func tion on the computer connected to the currently selected port, you can perform a keyboard / mouse reset on the computer. This function is essentially the same as unpluggi ng and replugging the keyboard and mouse on the target computer. To perform [...]

Chapter 5. Hotkey Operation 55 Hotkey Summary T able [Num Lock] + [-] or [Ctrl] + [F12] [A] [Enter] or [Q] [Enter] Invokes Auto Scan mode. When Auto Scan mode is in effect, [P] or left-click pauses auto scanning. When auto scanning is paused, pressing any key or another left-click resumes auto scanning. [B] T oggles the bee per on or off. [Esc] or [...]

KL3116 / KL3116T User Manual 56 This Page Intentionally Left Blank kl3116-3116t.book Pag e 56 Wednesday, June 1, 2011 1:28 PM[...]

57 Chapter 6 The Firmware Upgrade Utility The Windows-based firmware upgrade utility (FWUpgrade.exe) p rovides a smooth, automated process for u pgrading the KVM swit ch's firmware. The utility comes as part of a firmware upgrade package that is specific for each device. New firmware upgrade pack ages are posted on our web site as new firmware[...]

KL3116 / KL3116T User Manual 58 6. Sc roll down to FIR MWARE UPGRADE . Press [Enter] , then press [Y] to invoke Firmwar e Upgrade mode (see page 42). The current firmware upgrade version displays on the screen . St arting the Upgrade To upgrade your firmware: 1. Run the downloaded firmware upgrad e package file, ei ther by double clicking the file [...]

Chapter 6. The Firmware Upgrade Utility 59 3. Click Next to continue. The firmware upgrade utility mai n screen appears: The utility inspects your installation. All th e devices capable of being upgraded by the package are listed in the Device List panel. As you select a device in the list, its description appears in the Device Description panel. k[...]

KL3116 / KL3116T User Manual 60 4. Cli ck Next to perform the upgrade. If you enabled C heck Firmwar e V ersion , the utility compares the device's firmware level with that of the upgrad e files. If it finds that the device's version is higher than the upgrade version, it brings up a dialog box informing you of the situation and gives you[...]

Chapter 6. The Firmware Upgrade Utility 61 Upgrade Failed If the upgrade failed to complete succe ssfully a dialog box appears asking if you want to retry. Click Yes to retry. If you Click No , the Upgrade Failed screen appears. Click Cancel to close the firmware upgrade utility. See the next section, Firmware Upgrade Recovery , for how to proceed.[...]

KL3116 / KL3116T User Manual 62 This Page Intentionally Left Blank kl3116-3116t.book Pag e 62 Wednesday, June 1, 2011 1:28 PM[...]

63 Appendix Safety Instructions General  Read all of these instructions. Save them for future reference.  Follow all warnings and instructions marked on the dev ice.  Do not place the device on any unstable su rf ace (cart, stand, table, etc.). If the device falls, serious damage wi ll resul t.  Do not use the device near water .  Do[...]

KL3116 / KL3116T User Manual 64  If an extension cord is used with this device make sure that the total of the ampere ratings of all products us ed on this cord does not exceed the extension cord ampere rating. Mak e sure that the total of all products plugged into the wall outlet does not exceed 15 amperes.  T o help protect your system from[...]

Appendix 65 Rack Mounting  Before working on the rack, ma ke su re that the stabilizer s are secured to the rack, extended to the floor , and that the full weigh t of the rack rests on the floor . Install front and side stabilizers on a single rack or front stabilizers for joined multiple ra cks before work ing on the rack.  Always load the r[...]

KL3116 / KL3116T User Manual 66 T echnical Support International  For online technical support – includ ing troubleshooting, documentati on, and software updates: http://support.aten.com  For telephone support, see Telep hone Su pport , page ii i. North America When you contact u s, please have the followin g information ready beforehand: ?[...]

Appendix 67 Specifications Function KL31 16 / KL3116T Computer Connections Direct 16 Max 512 (via daisy chain) Port Selection OSD, Hotkey , Pushbutton Connectors External Console Port 1 x SPHD-18 (Male) External Mouse Port 1 x USB T ype-A (Female) KVM Ports 16 x SPHD-15 (Female) Daisy Chain 1 x DB-25 (Male) FW Upgrade 1 x RJ-1 1 (Female) Power 1 x [...]

KL3116 / KL3116T User Manual 68 OSD Factory Default Settings The factory default se ttings are as follows. Setting Default OSD Hotkey [Scroll Lock] [Scroll Lock] Port ID Display Position Upper Left Corner Port ID Display Duration 3 Seconds Port ID Display Mode The Port Number plus the Port Name Scan Duration 5 Seconds Scan/Skip Mode All Screen Blan[...]

Appendix 69 Supported KVM Switches Up to 31 additional KVM switch es can be daisy chai ned from the KL3116 / KL3116T. ATEN / Al tusen KVM switches that can be used when configuring a daisy chained installation are shown in the followi ng table: Note: 1. The maximum distance between any two KVM switches in the daisy chain cannot exceed 15 meters. 2.[...]

KL3116 / KL3116T User Manual 70 Keyboard Emulation Mac Keyboard The PC compatible (101/104 key) keyboard can emul ate the fu ncti ons of the Mac keyboard. The emulation mappings are listed in the table below. Note: When using key combinations, press and release the first key (Ctrl), then press and release the activation key . PC Keyboard Mac Keyboa[...]

Appendix 71 Sun Keyboard The PC compatible (101/104 key) keyboard can emu late the functions of the Sun keyboard when the Control ke y [Ctrl] is used in conju nction with other keys. The corresponding fun ctions are shown in th e table below. Note: When using key combinations, press and release the first key (Ctrl), then press and release the activ[...]

KL3116 / KL3116T User Manual 72 Clear Login Information If you are unable to perform an administrator login (because the username and password i nformation has b ecome corrup ted, or you have forgot ten it , for example), you can clear the login information wit h the fo llo wing procedure: 1. Power off the switch and remove the top cover from the u[...]

Appendix 73 Optional Rack Mounting For convenience and flexibili ty, three optional rack mounting kits are available:  A long bracket standard rack mount ing kit for 68 – 105 cm racks;  A short bracket Easy-Installation rack mount kit for 57 – 70 cm racks;  A long bracket Easy-Installa tion rack mo un t kit for 68 – 105 cm racks. To [...]

KL3116 / KL3116T User Manual 74 2. Packing material has bee n inserted to protect the KL31 16 / KL3116T during shipping. Slide the LCD module out until the packi ng m aterial is visible. Remove the packing material before installi ng the un it, as shown in the diagram below . 3. Attac h the left and right easy-installation mounting rails to the ins[...]

Appendix 75 a) Screw the front flanges to the rack first. b) Slide the bars with the rear flanges toward the rack until the fl anges make contact with the r ack, then screw the rear flanges to the rack. 4. Slide the switch onto the support flanges. Use the screws supplied with this package to loosely attach the front of the switch to the front of t[...]

KL3116 / KL3116T User Manual 76 5. Slide the rear attachment sliding brackets along the slide bars until they contact the rear of the switch, then use the screws supplied with this package to attach the bars to the rear of the switch (tighten the screws al l the way). Use the screw indicated below to connect the grounding wire to the rack. 6. Slide[...]

Appendix 77 T roubleshooting Overview Operation problems can be due to a variety of causes. The first step in solving them is to make sure that all cables are securely attached an d seated completely in their sockets. In addition, updating the product’s firm ware may solve problems that have been discovered and resolv ed since the prior versi on [...]

KL3116 / KL3116T User Manual 78 Sun Systems * These solutions work for most comm on Sun VGA cards. If these procedures fail to resolve the problem, consul t the manual for the Sun VGA card. Problem Solution Video display problems with HDB-15 interface systems (e.g. Sun Blade 1000 servers). The display resolution should be set to 1024 x 768 @ 60 Hz.[...]

Appendix 79 Dedicated Invocation Keys Two dedicated keys are provid ed on the key board module to make it easy to invoke Hotkey Mode and the OSD (as shown in the diagram below): Note: These keys are toggles. Press once to i nvoke the feature, press again to exit. About SPHD Connectors Alternative T ouchscreen Pointer Synchronization You can use the[...]

KL3116 / KL3116T User Manual 80 Limited W arranty ALTUSEN warrants this product against defects in material or workmanship for a period of one (1) year from the da te of purchase. If this pr oduct proves to be defective, contact ALTUSEN 's support department for repair or replacement of your unit. ALTUSEN w ill not issue a refund. Return reque[...]

81 Index A Activate Beeper, 4 1 alternate in vo ca ti o n ho tk eys, 52 alternate OSD hotkeys, 52 Auto Scanning, 45 Invoking Auto Scan, 50 Pausing Auto Scan, 45 , 50 Scan Durati on, 36 Stopping, 50 B Basic Operation, 19 Beeper Activate, 41 Control, 54 Broadcast Mode, 44 C Calibration, 38 Clear Login Information, 72 Clear the Nam e Li st , 41 Closin[...]

KL3116 / KL3116T User Manual 82 invoking, 48 Operatio n, 48 port selection, 49 Hotkey Summary Table, 55 Hotkeys alternate invocation keys, 52 alternate OSD keys, 52 beeper control, 54 KB/mouse reset, 54 port OS configuration, 53 restore defau l t val u es, 53 I Installation, 11 Daisy Chaining, 17 Single Stage, 14 Invoking Hotkey Mode, 48 K Keyboard[...]

Index 83 P Password, 31 Port ID Display Duration, 36 Display Mode, 36 Display Positi on, 36 Numbering, 28 Port LEDs, 7 Port Names, 41 Port OS Configuration, 53 Port Selection, 28 hotkeys, 49 Manual, 28 OSD, 33 Port Selection Area, 7 Ports quick view, 41 set operating system, 42 Power LED, 6 Socket, 9 Switch, 9 Powering Off, 27 Q Quick View ports, 4[...]