Atlantis Land A02-F24-4G manuale d’uso

26-Port Dual Web Rack Switch A02-F24-4G USER’S MANUAL A02-F24-4G_ME01[...]

[...]

26-Port Dual Web Rack Switch Copyright The Atlantis Land logo is a registered trademark of Atlantis Land SpA. All other nam es mentioned mat be trademarks or registered tradem arks of their respective owners. S ubject to change without notice. No liability for technical errors and/or omissions. CE Mark Warning This is a Class A product. In a domest[...]

26-Port Dual Web Rack Switch ii TABLE OF CONTENTS CHAPTER 1 ............................................... 1 1.1 A BOUT T HIS G UIDE ........................................................................................................................ 1 1.2 T ERMS /U SAGE ..........................................................................[...]

26-Port Dual Web Rack Switch iii Reset Settings ................................................................................................................. ................ 23 Logout ............................................................................................................................................ 23 APPENDIX A ......[...]

[...]

26-Port Dual Web Rack Switch 1 Chapter 1 Introduction 1.1 About This Guide Congratulations on your purchase of the 24+4G-Port 10/100/1000Mbps Gigabit Ethernet Web Sm art Switch. This device integrates 1000Mbps Gigabit Ethernet, 100Mbps Fast Ethernet and 10Mbps Ethernet network capabilities in a highly flexible package. This guide discusses how to i[...]

26-Port Dual Web Rack Switch 2 internetworking technologies. And with expected advances in the coming years in silicon technology and digital signal processing that will enable Gigab it Ethernet to eventually operate over unshielded twisted-pair (UTP) cabling, outfitting your network with a power ful 1000-Mbps-capable backbone/server connection cre[...]

26-Port Dual Web Rack Switch 3 QoS QoS gives you full control over which types of outgoi ng data traffic should be given priority by the Switch, ensuring important data like gaming packets m ove through the Switch at lightning speed, even under heavy load. 1.4 Features Dual Web Rack Switch provi des the following features: • 24×10/100Mbps Auto-n[...]

26-Port Dual Web Rack Switch 4 Chapter 2 Installation This chapter provides unpacking and in stallation inform ation for the Switch. 2.1 Package Contents Open the shipping cartons of the Switch and carefu lly unpacks its contents. The carton should contain the following item s: • 26-Port Dual Web Rack Switch • One AC power cord, suitable for yo[...]

26-Port Dual Web Rack Switch 5 Combine the Switch with the provided screws Then, use screws provided with the equipmen t rack to m ount each switch in the rack. Mount the Switch in the rack 2.4 Connecting Network Cable The Switch supports 10Mbps Ethernet or 100Mbps Fa st Ethernet and it runs both in half and full duplex mode using two pair of Categ[...]

26-Port Dual Web Rack Switch 6 2.5 AC Power The Switch used the AC power supply 100-240V AC, 50-60 Hz. The power switch is located at the rear of the unit adjacent to the AC power conn ector and the syst em fan. The switch’s power supply will adjust to the local power s ource autom atically and may be tu rned on without having any or all LAN segm[...]

26-Port Dual Web Rack Switch 7 The Switch is equipped with two mini-GBIC por ts, supported optional 1 000BASE-SX/LX mini-GBIC module (1000BASE-SX mini-GBIC module). Rear Panel Power Switch: This is a switch where you can control to enable or disable the power. AC Power Connector: This is a three-pronged connector that supports the power cord. Plug [...]

26-Port Dual Web Rack Switch 8 Led SYSTEM Blinking : When the CPU is working, the System LED is blinking. On/Off : The CPU is not working. Ports 1~24 10/100M Status LEDs Link/ACT: Link/Activity On : When the Link/ACT LED lights on, the resp ective port is successfully connected to an Ethernet network. Blinking : When the Link/ACT LED is blinking, t[...]

26-Port Dual Web Rack Switch 9 Chapter 3 Configuration Through the Web Browser you can configure the Switch such as VLAN, Trunking, QoS… etc. With the attached Web Managem e nt Utility, you can easily discove r all the Web Management Switch, assign the IP Address, changing the pa ssword and upgrading the new firmware. 3.1 Installing the Web Manag[...]

26-Port Dual Web Rack Switch 10 Discovery List This is the list where you can discover all the Web managem e nt devices in the entire network. By pressing the “ Discovery ” button, you can list all the Web Mana gem ent devices in the discovery list. Double click or press the “ Add to monitor list ” button to select a device fr om the Discov[...]

26-Port Dual Web Rack Switch 11 Monitor List All the Web Smart Device in the Monitor List can be monitored; you can also receive the trap and show the status of the device. System word definitions in the Monitor List: • S: Shows the system symbol of the Web-Smart device, represent for device system is no t alive. • IP Address: Shows the current[...]

26-Port Dual Web Rack Switch 12 In order to receive Trap information, switch has to be configured with Trap IP and Trap Events in Web browser, which are available in the Trap Setting Menu Add Item: To add a device to the Monitor List manually, enter the IP Address of the device that you want to monitor. Delete Item: To delete the device in the Moni[...]

26-Port Dual Web Rack Switch 13 Do NOT upgrade firmware on any At lantis Land product over a wireless connection. Failure of the device may result. Use on ly hard-wired netw ork connections. Web Access: Double click the device in the Monitor List or select a device in the Monitor List and press this “ Web Access ” button to access the device in[...]

26-Port Dual Web Rack Switch 14 Chapter 4 WEB Configuration The 24+4G-Port 10/100/1000Mbps Gigabit Ethernet We b Sm art Switch has a Web GUI interface for smart switch configuration. The Switch can be c onfigured through the Web Browser. A network administrator can manage, control an d monitor the switch from the lo cal LAN. This section indicates [...]

26-Port Dual Web Rack Switch 15 4.2 Setup Menu When the main page appears, find the Setup menu in the left side of the screen. Click on the setup item that you want to configure. There are 4 options: Port Settings, VLAN Settings, Trunk Setting and Mirror. Port Settings In Port Settings menu, this page will show each por t’s status, press the ID p[...]

26-Port Dual Web Rack Switch 16 To change the port setting, click on the ID parameter to enter to the selected por t to configure its Speed/Disable, Flow control and QoS setting. Speed/Disable: This setting has six modes: 100M Full , 100M Half , 10M Fu ll , 10M Half, Auto and Disable . Flow Control:[...]

26-Port Dual Web Rack Switch 17 This setting determines whether or not the Switch will be handling flow control. Set FlowCtrl to Enable for avoiding data transfer overflow. Or it sets to Disable ; there is eith er no flow control or other hardware/software management. When the port is set to forced m ode, then the flow control will automatically se[...]

26-Port Dual Web Rack Switch 18 When add a new Vlan, the members of de fault Vlan 1 are removed automatically. Therefore, packets can only transmit am ong the member ports of new Vlan. Packets can not fordward among the ports which are not included in the new vlan. Trunk Setting The Trunk function enables to casca de two devices with a double ti m [...]

26-Port Dual Web Rack Switch 19 For Detail packet information, c lick on the ID parameter as Figure.[...]

26-Port Dual Web Rack Switch 20 System Settings The System Setting includes the System name, Location na me, Login Timeout, IP Address, Subnet Mask and Gateway. Through the Web Management Utility, you can easily re cognize the dev ice by using the System Name and the Location Name. The Login Timeout is to set the idle time-out for s ecurity issue, [...]

26-Port Dual Web Rack Switch 21 TRAP The Trap Setting enables the device to m onitor the Trap through the Web Mana gement Utility, set the Trap IP Address of the manage r where the trap to be sent. System Events : Monitoring the system’s trap. • Device Bootup: a trap when booting up the system. • Illegal Login: a trap when there is u sing a w[...]

26-Port Dual Web Rack Switch 22 • Abnormal* Transmit Error: a trap when there are transm it data error in copper port. • Abnormal*: 50 error packet count within 10 seconds. Abnormal*: 50 error packet count within 10 seconds. Set Password Password is the invaluable tool for th e manager to secure Web Management Switch, use this function to chang[...]

26-Port Dual Web Rack Switch 23 Reset Settings The Factory Reset button helps you to reset the device back to the defa ult setting from the factory. Be aware that the entire configuration will be rese t, th e IP address of the device will be set to default setting 192.168.0.1 [password= admin] . Logout When press this function, the web conf igurati[...]

26-Port Dual Web Rack Switch 24 APPENDIX A RJ-45 Pin Specification The following diagram and tables show the standa rd RJ-45 receptacle/connector and their pin RJ-45 Connector pin assignment Contact Media Direct Interface Signal 1 TX + (tx) 2 TX - (tx) 3 Rx + (rx) 4 Not used 5 Not used 6 Rx - (rx) 7 Not used 8 Not used The standard cable, RJ-45 pin[...]

26-Port Dual Web Rack Switch 25 APPENDIX B Technical Specifications Standard IEEE 802.3 10BASE-T Ethernet IEEE 802.3u 100BASE-TX Fast Ethernet IEEE 802.3z 1000BASE-SX/LX Gigabit Ethernet IEEE 802.3ab 1000BASE-T Gigabit Ethernet IEEE 802.3x Full Duplex Flow Control Protocol CSMA/CD Data Transfer Rate Ethernet: 10Mbps (half duplex ), 20Mbps (full-dup[...]

26-Port Dual Web Rack Switch 26 APPENDIX C Support If you have any problems with theSwitch , please consult this m anual. If you continue to have problems you should contact the dealer where you bought this Switch. If you have any other questions you can contact the Atlantis Land co mpany directly at the following address: Atlantis Land SpA Viale D[...]