Autopage RS-725LCD manuale d’uso

1 RS - 725 LCD PROFESSIONAL REMOTE CAR STARTER WITH ALARM SYSTEM & 2 - WAY LCD COMMUNICATION OPERATION MANUAL THIS PRODUCT IS DESIGNED FOR PROFESIONAL INSTALLATION ONLY[...]

2 TABLE OF CONTENTS: LCD REMOTE TRANSMITTER : A BATTERY REPLACEMENT 5 B THE REMOTE LCD ICONS WITH FUNCTION 6 C PROGR AMMING OF THE LCD REMOTE TRANSMITTER 1. Screen Lamp ON 2. Power Save Mode 3. Clear The Flash Icon and Melody Sound 4. Stop The Melody Sound. 5. Button Lock 6. Vibration / Melody Mode 7. Enable / Disable Bi Sound While Pressing Button[...]

3 Noise Abatement Circuit 15 O ANTI CAR - JACKING Active Anti Car Jacking Passive Anti Car Jacking Trigger The Anti Car Jacking Mode Override The Syst em To Turn Off Anti Car Jacking 16 16 16 16 16 P SYSTEM’S TRIGGER CHECK 16 Q SYSTEM’S STATUS CHECK 16 R DRIVER PAGING (OPTION) 16 S DOME LIGHT CONVENIENCE DELAY & SUPERVISION 17 T IGNITION CO[...]

4 TRANSMITTERS The RS725 comes with two transmitters. The XT72LCD is a 2 - way transmitter and receiver, also referred to as a transceiver. The XT - 33 is a mini - size 1 - way transmitter. Both operate on the AM band with a code - rolling feature that will prevent any illegal use of a code - grabber attempting to record and steal the codes of your[...]

5 WARNINGS: As with any product that performs automatic functions, there are certain safety precautions that you must practice and be aware of. 1. Keep the transmitter out of children’s reach. 2. Do not leave anyone in the vehicle while running on remote control. 3. Alert servicing personnel that the vehicle can be started automatically. 4. Do no[...]

6 B. THE REMOTE LCD ICONS WITH FUNCTION: Door Lock Your vehicle doors are locked Door Unlock Your vehicle doors are unlocked and the system is Disarmed Armed Mode Your vehicle is in armed mode Valet Mode All the function shall be temporarily on hold. Remote Transmission You are transmitting the signal to control unit In – Range Indicator Your are[...]

7 C. PROGRAMMING OF THE LCD REMOTE TRANSMITTER: Transmitter Button Description Operation (1 second) LCD screen lamp turns on for 5 seconds. Press and hold for 1 second 1 melody sound to confirm en ters. ( 3 seconds) Timer Programming Mode. Press and hold for 3 seconds 2 - melody sounds to confirm enter. ( 5 seconds) Power Save Mode Press and hold f[...]

8 6. Vibration / Melody Mode: This is useful when you are in a noisy place and it is difficult to hear the beep sound from the remote control. In this mode, the remote control vibrates itself if your security system is triggered. Press the button first, within 3 seconds press and hold ( ) button for 2 seconds to select the mode of vibration or melo[...]

9 D. CLOCK & TIMER SETTING: Transmitter Button Descripti on Press Transmitter Button 1 Press & Hold button for 3 seconds Clock Setting (Hour) *Flash digit for adjusting for – and for + Press button once Time setting (Minute) *Flash digit for adjusting for – and for + 2 Press button once. Al ert Alarm Time Setting (Hour) *Flash digit for[...]

10 3. Count Down Timer Setting: Example - Set the countdown timer at 2:30 1. Press & hold the button for 3 seconds, two - melodies will sound and the “Hours” digit will flash for adjustment. 2. Press the button 5 times, the LCD screen will show the icon and the “Hours” digit flashes for adjustment. 3. Press or button to decrease or incr[...]

11 - Passive Arming By - pass While the system Disarmed. Activate or Turn Off The Remote Sta rt Press twice within 3 seconds. + Channel # 4 Timer Output ( 4 ) Optional II Switching code For 2nd Car Operation . For regular remote transmitter Only B. LCD DISPLAY TRANSMITTER OPERATION ONLY: Transmitter Button System Function Remark - ( C) System’s T[...]

12 4. Passive Starter Disable Fast Flash Disable 5. Panic Alarming Flashes Flashes 6. Car - Jacking Alarming Flashes Disable Flashes 7. Car Locator 6 Chirps 12 Flashes Locking G. ACTIVE ARMING – LOCK & ARM: 1. Press button on the transmitter. 2. The siren will chirp once and parking light will flash once indicating that the system is n ow arm[...]

13 by - pass, press the transmitter or button s and the system will return to normal status. I. ACTIVE DISARMING – UNLOCK & DISARM: 1. Press button on the transmitter. 2. The siren will chirp twice and the parking lights will flash twice indicating that the security system is now disarmed. The vehicle’s doors will unlock and the dome light [...]

14 4. Within 15 seconds, enter your chosen second digit code by pressing and releasing the Valet Switch. 5. Turn the ignition switch “OFF” position. 4 Chirps f rom siren/horn and 3 flashes from the parking lights will indicate the system has disarmed. Note 1: You must override the alarm within 60 seconds. If not, the system will automatically r[...]

15 2. During panic mode, the normal function of this transmitter button will be disabled. The transmitter and buttons can be used to lock and unlock the door (if the option is installed), however once the button is pressed, the vehicle’s starter disable device, (where installed) will be disengaged allowing the vehicle to start. 3. To stop the ala[...]

16 O. ANTI CAR - JACKING Warning: If you don't need the car jacking function in this alarm system, be sure to set car jacking feature “OFF”. T his system is default setting all car jacking “OFF”. ACTIVE ANTI CAR JACKING: 1. Press and hold the transmitter and button s at the same time for 2 seconds while the vehicle’s ignition is ON. [...]

17 Out of Car Driver Paging (Optional Feature) If someone tries to page you by tapping the paging (knock) sensor (OPTIONAL) which is usually mounted on t he bottom part of front window, the paging melody sound continues sounding from you Remote LCD Transmitter and the “ ” icon will flash on the LCD screen. 1. Press the transmitter button first,[...]

18 X. S ECOND VEHICLE SECURITY OPERATION: Your 5 - button remote transmitter can be utilized to control a second vehicle security system, To program the remote control transmitter to a second vehicle, follow the instructions for Transmitter programming. Programming the Transmitter to 2 nd Car Enter: 1. Turn the ignition key ON 3 times . (Finishing [...]

19 REMOTE START OPERATION: A. TO REMOTE START THE VEHICLE: When you want to start your vehicle, 1. Press button once on the transmitter. 2. The parking light will activate to indicate the remote start received the signal. 3. The engine will start in app roximately 5 seconds. 4. Once the engine is running, after couple seconds the parking lights wil[...]

20 2. Before turning off the engine, press and release and buttons at the same time . -- The LED will flash indicating the remote start has entered the turbo charge mode . 3. Take the “Ignition Key” from the key cylinder. -- Engine keeps running. -- 4. Exit and secure the vehicle. -- Engine continues running until the pre - programmed time elap[...]

21 F . TEMPERATURE CHECK (OPTIONAL) If you installed the optional temperature sensor, you can monitor, Through the LCD screen, the present indoor temperature of the passenger compartment before cooling or heating your vehicle. Press the transmitter buttons first, within 3 seconds press ( ) button; the in - door temperature will be shown on the LCD [...]

22 LIMITED LIFETIME WARRANTY PROVISIONS ( U.S. ,Continental U.S. and Canada Only) 1. Auto Page, Inc. WARRANTS that this new unit has been thoroughly inspected and tested at the factory prior to delivery. Your Aut o Page equipment is guaranteed for “life” to the original purchaser/user of the equipment and the original vehicle in which it was in[...]

23 This WARRANTY CARD is for your record. However, Auto Page reserves the right to request you to su bmit this WARRANTY CARD, which must have complete information to receive warranty service. Please keep this card in a secured place . AUTOPAGE WARRANTY SERVICE CARD Model: _______________ Serial # _______________ CUSTOMER TO COMPLETE DEALER TO COMP [...]

24 960 Knox Street Unit B Torrance, California 90503 Main Office: 310 - 323 - 1800 Customer Service: 800 - 262 - 2527 Ext. 462 www.autopageusa.com[...]