AVerMedia Technologies NV 6000 EXP manuale d’uso

AVerMedia ® NV 3000/5000/60 00(EXP)/7000H Digital Video Recordin g System User Manual V ersion 7.1(SP1)[...]

FCC NOTICE This device has been tested and found t o comply with the limi ts for a Class A digital device, pu rsuant to Pa rt 15 of the FCC Rules . These limits are designe d to provide reaso nable protecti on against h armful inte rference in a c ommercial , industrial or business environment. This equipm ent can gene rate, use and radiate radio f[...]

In no event will AVerMedia ® be liable f or direct, indi rect, speci al, incidental, o r consequential damag es arising out of t he use or inabilit y to use this prod uct or documentation, even if advised of the possibility of such damages. TRADEMARKS AVerMedia ® is a trademark of AV erMedia ® TECHNOLOGIES, Inc. IBM PC is a registered trad emark[...]

i T able of Content s Chapter 1 Introduction..................................................................................... 1 NV3000 Package ................................................................................................................. .. 1 NV5000 Package .....................................................................[...]

ii 2.6.2 Installing (1) NV6000 Ex press and I/O ca rd ................................. 13 2.7 NV7000H Hardware Installation ................................................................................. 14 2.7.1 Installing (1) NV 7000H and I/ O ca rd........................................... 14 2.7.2 Installing (2) NV7000H and (2) I/O cards ..[...]

iii 4.7 Setting Up and Using the Emap ................................................................................. 36 4.7.1 T o Set Up the Emap .................................................................. 36 4.7.2 T o Use the Emap ........................................................................ 37 4.8 T o Cut and Save the Wanted [...]

iv 5.9.7 T o Setup SMS/MMS Setting: .......................................................... 68 5.9.8 T o Setup PTZ Pr ese t Point: ........................................................ 68 5.9.9 T o Setup Al arm SO P : ................................................................ 68 5.9.10 T o Setup CM S Setting ............................[...]

v Chapter 1 1 Web T o ols.................................................................................. 103 11 . 1 Dispatch Server ........................................................................................................ 103 11 . 2 Remote Backup .....................................................................................[...]

Manual Conventions The following conventions are used throughout this manual. Caution symbol is intended to alert the user of the important installation and operating instructions. Fail to comply may damage the system. i Information symbol is intended to provi de additional information for t he purpose of clarification. NOTICE: - INFORMATION IN THI[...]

1 Chapter 1 Introduction A V erMedia A V erDVR is a 32-bit PCI video capt ure card that works as a digital video surveillance system. It enables you to capture true color images and real-time videos from 4 up to 16 camera inputs simultaneously . With the latest Motion Detection technology , you no longer need to monitor every single moment of the d[...]

NV3000/5000/6000(EXP)/7000H User Manual 2 NV6000 Express Pac kage NV6000 Express package includes the following: (1) (2) (3) (4) (5) (6) 8 FC - 26P (7) (1) NV6000 (3) 2X A V cable (5) Installation CD (7) I/O cable (2) I/O card (4) Quick Guide (6) 30cm Watchdog line NV6000 Express OSD Kit (1) (2) (3) (4) (1) Remote Control (batteries included) (2) I[...]

Chap ter 1 I n troductio n 3 OSD kit (optional) This allows you to operate NV DVR with the use of remote contr ol. (1) (2) (3) (4) (1) Remote Control (batteries included) (2) IR USB Receiver (3) OSD Installation CD (4) 2X V elcro Strip s i OSD control is not supported un der dual monitor environment. If there is any damage, shortage or inapprop ria[...]

NV3000/5000/6000(EXP)/7000H User Manual 4 NV6000 Card Parts D-type AV IN port 01 TV out port I/O connector Reset pin Watchdog pin D-type AV IN port 02 NV 6000 Express Card Part s DVI AV IN port 01 I/O connector Reset pin Watchdog pin DVI AV IN port 02 NV7000H Card Parts D-Type AV IN port T V out port TV out link connector Watchdog pin Reset pin I/O[...]

Chap ter 1 I n troductio n 5 IR USB Receiver Part & Connection USB Port IR sensor i For detail of OSD kit installation, please refer to OSD kit Quick Guide.[...]

6 Chapter 2 Hardware Installation 2.1 Minimum System Requirem ents First, must verify if the computer meets the minimum system requirements. NV 3000/5000/6000/7000H: NV3000 NV5000 NV6000 NV7000H CPU Pentium ® 4 2.8GHz or above recommended Motherboard Intel 865, 875, 915, 925, 945, 955, NVIDIA nFORCE4 SLi - Intel Edition Chipset Intel 875, 915, 925[...]

Chapter 2 Hardw a re Inst a ll ation 7 2.2 NV3000/5000/600 0(EXP)/7000H Hardware Combinations A V erMedia NV DVR provides powerful su rveillance functions and flexible hardware combinations. The table show s the numbers of camera inputs, audio inputs, sensor inputs and relay outputs on different hardware combinations. Before installing the cards, t[...]

NV3000/5000/6000(EXP)/7000H User Manual 8 NV6000 Express hardw are combinations: Hardware Combinations NV6480 Card IO Card Camera Input Audio Input Sensor Input Relay Output 1 1 16 16 4 4 Hardware Combinations NV6240 Card (8Channels) IO Card Camera Input Audio Input Sensor Input Relay Output 1 1 8 8 4 4 Hardware Combinations NV6240 Card (16 Channel[...]

Chapter 2 Hardw a re Inst a ll ation 9 2.3 NV3000 Hardw are Installation 2.3.1 Installin g (1) NV3000 and (1) I/O A udio cards (optional) i The I/O audio card is an optional item. T he D-type I/O port receives and transmit signal from the I/O box where the sens or and relay device are connected to it, while the audio input port receives the signal [...]

NV3000/5000/6000(EXP)/7000H User Manual 10 IN 1 IN 2 IN 3 IN 4 TV OUT IN 1 IN 2 IN 3 IN 4 TV OUT Card 1 NV3000 Card 2 Card 3 Card 4 Channel 1 2 3 4 5 6 7 8 IN 1 IN 2 IN 3 IN 4 TV OUT IN 1 IN 2 IN 3 IN 4 TV OUT 9 10 11 12 13 14 15 16 NV3000 card 1 NV3000 card 2 NV3000 card 3 NV3000 card 4 20cm video signal line 20cm video signal line 20cm video sign[...]

Chapter 2 Hardw a re Inst a ll ation 11 NV5000 card I/O Audio card IN 1 IN 2 IN 3 IN 4 TV OUT NV5000 card I/O Audio card Channel 1 2 3 4 AUDIO IN 1 AUDIO IN 2 AUDIO IN 3 AUDIO IN 4 2.4.3 Inst alling (1) NV5000 a nd (3) BNC video extension cards i The BNC video extension card is an optional item. It comes with additional four (4) BNC video input por[...]

NV3000/5000/6000(EXP)/7000H User Manual 12 NV5000 card BNC extension card IN 1 IN 2 IN 3 IN 4 TV OUT IN 1 IN 2 IN 3 IN 4 NV5000 Channel 1 2 3 4 5 6 7 8 BNC video extension card I/O Audio card AUDIO IN 1 AUDIO IN 2 AUDIO IN 3 AUDIO IN 4 I/O Audio card 2.4.5 Inst alling (2) NV5000, a nd (2) BNC video extension cards 1. Remove the PC case cover . 2. R[...]

Chapter 2 Hardw a re Inst a ll ation 13 NV6000 card I/O card TV OUT NV6000 I/O card AV connection cable AV connection cable 2.6 NV6000 Express Hardw are Installation The NV6000 Express can support up to 16 cameras and 8 audio inp uts 2.6.1 Inst alling (2) NV6000 Express i The PC motherboard needs to have 2 PCI-Ex1 slots for installing 2 NV6000 Expr[...]

NV3000/5000/6000(EXP)/7000H User Manual 14 NV6000 Express card I/O card NV 6000 Express I/O card AV connection cabl e AV connection cabl e 2.7 NV7000H Hardware In stallatio n The supplied A V connection c able provides up to 16 cameras and 8 audio inputs. 2.7.1 Inst alling (1) NV7000H and I/O card 1. Remove the PC case cover . 2. Remove 2 brackets [...]

Chapter 2 Hardw a re Inst a ll ation 15 NV7000H card 1 I/O card 1 NV7000H card 2 I/O card 2 TV OUT NV7000H card 1 I/O card 1 TV OUT NV7000H card 2 I/O card 2 2.8 Connecting t he Watchdog line The NV DVR program constantly moni tors its operation. Connecting the NV3000/5000/6000/7000H to the motherboa rd reset switch panel, enables the unit to resta[...]

NV3000/5000/6000(EXP)/7000H User Manual 16 2.8.2 Connecting the W atchdog line to NV6000 1. Look for the labeled RESET SW switch lead and connect it to the NV6000 card reset pin. 2. Connect the supplied Watchdog line to the NV6000 card watchdog pin and the other end to the motherboard RESET SW panel. If you are not sure, please refer to the motherb[...]

Chapter 2 Hardw a re Inst a ll ation 17 2.9 Connecting t he Cameras, a TV and Audio device 2.9.1 Connecting the Cam eras, a TV and A u dio device to NV3000/5 000 1. Connect the cameras to the BNC video input port (see NV3000/500 0 card parts ). If you have installed more than one card, please refer the sequence of the camera to the number of cards [...]

NV3000/5000/6000(EXP)/7000H User Manual 18 Camera 5 Camera 6 Camera 7 Camera 8 Camera 2 Camera 3 Camera 1 Camera 4 MIC 3 MIC 2 MIC 4 MIC 1 RCA cable Television TV OUT NV600 0 AV connection cable Camera 13 Camera 14 Camera 15 Camera 16 Camera 10 Camera 11 Camera 9 Camera 12 MIC 7 MIC 6 MIC 8 MIC 5 AV connection cable 2.9.3 Connecting the Cam eras, a[...]

Chapter 2 Hardw a re Inst a ll ation 19 NV6000 Express Camera 5 Camera 6 Camera 7 Camera 8 Camera 2 Camera 3 Camera 1 Camera 4 MIC 3 MIC 2 MIC 4 MIC 5 MIC 6 MIC 7 MIC 8 MIC 1 RCA cable Television AV connection cable Camera 5 Camera 6 Camera 7 Camera 8 Camera 2 Camera 3 Camera 1 Camera 4 MIC 3 MIC 2 MIC 4 MIC 5 MIC 6 MIC 7 MIC 8 MIC 1 AV connection [...]

NV3000/5000/6000(EXP)/7000H User Manual 20 2.10 Dual Monitors Setup The NV DVR system Supports Single and Dual monitor displays. When using dual monitors, the E-map and Playback function will be display on the second monitor . The Video configuration is different for each di f ferent VGA chipsets. Please follow the steps below to setup the dual mon[...]

Chapter 2 Hardw a re Inst a ll ation 21 4. Select the Extended Desktop and then click Finish . 5. If user selected the Advanced mode, click the Vi ew button. 6. In Displa y Manager , right click on the second Displa y on the right side and select Extend Main onto monitor . 7. Adjust each monitor resolution to 1024x768.[...]

NV3000/5000/6000(EXP)/7000H User Manual 22 2.10.2 Graphic card with NVIDIA chipset 1. Click the NVIDIA nView , and select the Dualview mode. 2. Adjust each monitor resolution to 1024x768. 3. T o review if the display mode is correct, you can check the task bar . The task bar will show on the first monitor only . M o n i t o r 1 M o n i t o r 2 2.11[...]

Chapter 2 Hardw a re Inst a ll ation 23 D-Type I/O port AUDIO IN 1 NV3000 I/O Audio card AUDIO IN 1 AUDIO IN 2 AUDIO IN 3 AUDIO IN 4 NV5000 I/O Audio card D-type cable 2.11.1 I/O box Sensor a nd Relay pinhole al location: The signal from the sensor (i.e., infrared sens ors, smoke detectors, proximity sensors, door sensors, etc.) is being transmitte[...]

NV3000/5000/6000(EXP)/7000H User Manual 24 Pin # Definition Pin # Defini ti on 1 Sensor input sig nal 1+ 11 Relay Normal Close 1 2 Sensor outpu t signal 1-(GND) 12 Relay Common 2 3 Sensor input sig nal 2+ 13 Relay Normal Open 2 4 Sensor outpu t signal 2-(GND) 14 Relay Normal Close 2 5 Sensor input sig nal 3+ 15 Relay Common 3 6 Sensor outpu t signa[...]

Chapter 2 Hardw a re Inst a ll ation 25 C. COIL RA TINGS (at 20 oC ) Coil Nominal V oltage (VDC) Coil Resistance 10% Pick-up V oltage (VDC) Drop-Out V oltage (VDC) Nominal Current (mA) 5 125 3.75 0.5 40 * Max Continuous Voltage at 20 o C : 1 10% of Coil Nominal Voltage D. CONT ACT RA TINGS Contact A rrangement 1 Form C (SPDT) max. Switch Powe r max[...]

26 Chapter 3 Software Installation This chapter describes how to install the NV DVR software and drivers. The CD-Key is permitted for use on a singl e computer. It is prohibited to use the CD-key on more than one computer . Once detecte d, this would cause a system conflict and some of the features might fail to work on both PC. Before installing t[...]

Chapter 3 Software Installation 27 3.1 Installing NV DVR Software and Drivers in Windows XP/2000 Upon turning the computer on, the system automatically detects the newly installed hardware. When the Found New Hardware dialog box ap pears, IGNORE it. Remember : It is important to install the NV DVR sof tware first, before installing the drivers. 1. [...]

28 Chapter 4 Using the NV DVR Software 4.1 Running the NV DVR Soft w are T o run the application, double-click on your PC desktop or click Start > Progra ms > DSS > NV DVR . For security purpose, some of the features would require you to enter User ID and Password before it can be accessed. When the Authorizati on dialog box appears, key i[...]

Chapter 4 Using the NV DVR Software 29 4.3 Familiarizing the Buttons in Prev iew /Advanced Mode Name Function (1) Exit Call up the Logout dialog box. In the logout dialog box , you may do the following : - Click Exit to close the NV DVR program. - Click Login to sign-in in different acc ount. - Click Minimi ze to reduce the NV DVR to t askbar butto[...]

NV3000/5000/6000(EXP)/7000H User Manual 30 Name Function (5) Emap Display the map in each area, and the location of camera/ sensor/ rela y and the warning. (see also Chapter 4.7 ) (6) Network Enable/disable remote system access. This feature allows you to access NV DVR server from a remote location via internet connection. (see also Chapter 8 ) (7)[...]

Chapter 4 Using the NV DVR Software 31 4.3.1 Using Event Log Viewer Show the record of activities that take place in the system. 1. Click the Event Log button on DVR system main interface. The Event log viewer window will show up. 2. Select the Date to view or search certain event log by key word. Enter the key word in Find T ext column and click S[...]

NV3000/5000/6000(EXP)/7000H User Manual 32 Name Function (4) Search String Enter specific key word or word st ring to search the POS event log. Mark the “Match whole word exactly” box if wants to find exactly key word or word string of POS event log. (5) Full Reception Display the POS event log detail that user selected from Search Result windo[...]

Chapter 4 Using the NV DVR Software 33 Name Function (2) AutoScan St art/S top video screen c ycle switch (3) Alarm Alert and display warning info. (4) Playback Switch to Playback mode. This allows you to view the recorded video file. (see Chapter 4.5 ) (5) Advanced Switch to Preview/Advanced mode. 4.5 Familiarizing the Buttons in Playback Mode T o[...]

NV3000/5000/6000(EXP)/7000H User Manual 34 Name Function (3) Hour Buttons Select and click to playback the recorded video file on the specific time frame. i The Hour buttons represent the ti me in 24-hour clock. The blue bar on top of the hour button indicates that there is a recorded video file on that period of time. While the red bar indicates t[...]

Chapter 4 Using the NV DVR Software 35 Name Function (14) Full screen View in Playback-comp act mode. T o return, press the right button of the mouse or ESC on the keyboard or click the arrow icon. When you switch to full screen in multiple-screen mode, Left click to toggle to only display one of the video in the multiple-screen mode or all. i When[...]

NV3000/5000/6000(EXP)/7000H User Manual 36 4.6 Familiarizing the Buttons in PTZ Camera Controller (see also chapter 4.13 ) Name Function (1) Close Exit PTZ camera controller . (2) Setup Configure PTZ cameras.(also see Chapter 4.13 ) (3) AutoPan Operate the PTZ cameras automatically based on the selected camera group preset position number . (4) Foc[...]

Chapter 4 Using the NV DVR Software 37 4. When the inserted map appears on the Emap screen, click Edit . Y ou may now drag t he camera, sensor , and relay icons to its pl ace on the map. Icons on the map can be relocated anywhere. Right click camera icon c an select the camera direction in 8 angles. If you are going to locate the icon on the map to[...]

NV3000/5000/6000(EXP)/7000H User Manual 38 4.8 To Cut and Sa ve the Wanted Portion of the Recorde d Video 1. Use the Play back Control buttons or drag the ba r on the playback progress bar and pause on where you want to start the cut. Then, click Segment to set the begin mark. 2. Use the Play back Control buttons or drag the ba r on the playback pr[...]

Chapter 4 Using the NV DVR Software 39 Seconds of that minute, every Second of that 10 seconds. T o go back, click . T o view from the selected frame and close event search, click . 4.11 To Search Using the E vent Search 1. Click on the video screen on where you want to search. 2. Click Event Search . The Event Search text (red) would appear at t h[...]

NV3000/5000/6000(EXP)/7000H User Manual 40 4.13 To Setup the PTZ/IP PTZ Camera 4.13.1 Setup the PTZ Camera 1. In the PTZ control panel, click Setup . 2. When the PTZ Setup dialog box appears, select the camera numbe r and check the Use PTZ box. 3. In the Connection Settings section, select the COMPort where t he PTZ camera is connected, PTZ ID numb[...]

Chapter 4 Using the NV DVR Software 41 4.13.2 Setup the IP PTZ Camera 1. In the PTZ control panel, click Setup . 2. When the PTZ Setup dialog box appears, click IP PTZ tab. 3. Select the camera number and check the Use PTZ box. 4. In the Connection Settings section, select the Protocol where the P TZ camera is connected and IP Camera Site that IP o[...]

[...]

43 Chapter 5 Customizing th e NV DVR System In the Preview/Advanced screen mode, click button to customize your NV DVR. When the NV DVR configuration setup selection appears, select and click the buttons you want to change the setting. 5.1 System Setting In the System Setting dialog box, click OK to accept the new settings, click Cancel to exit wit[...]

Chapter 5 Customizing NV DVR Sy stem 44 of days in Days text box. (2) Hard Disk Calculator Estimate the hard disk recording capacity . The result of calculation is a rough value which only for reference. The hard disk record cap acity will be varied by the real record quality and complexity of video scene. Click , the hard disk calculator window s [...]

NV3000/5000/6000(EXP)/7000H User Manual 45 on the computer , then there is only one video card channel for selection. (2) Select the display mode as Autoscan . (3) Preview screen: Live camera video would be displayed here. (4) Video Mode: Select the video mode user wants to display on screen. The system will auto cycle switch to display the next ch[...]

Chapter 5 Customizing NV DVR Sy stem 46 Enable the conditions in Miscellaneous section you want the system to perform. - Status Re p or t Send a daily system event and attention analysis report. T o change the e-mail settings, click Setup . - Desktop Lock Deactivate the [ Ctrl-Alt-Del ] and [ Windows ] keyboard key functions. - Beep if no signal Ma[...]

NV3000/5000/6000(EXP)/7000H User Manual 47 5.1.1 T o Set the POS Setting: 1. In the System Setting dialog box, POS section, click Setting . T o set the text flow and color format, click Advance . 2. In the POS Console Setting dialog box, click Ad d to set a new POS setting, Modify to change the POS setting, and Delete to remove the selected POS set[...]

Chapter 5 Customizing NV DVR Sy stem 48 (5) Port Setting : Select the Local or Remote port to where it is connected. Local - select the COM port number which is connected. Remote – Use the UDP protocol for remote connection if POS system can broadcast to Internet. Enter the IP address of the remote station. (6) Map to Channel : Select to which ca[...]

NV3000/5000/6000(EXP)/7000H User Manual 49 (3) Camera - Display Enable/disable to show the video. Even if the video of the selected camera is hidden you can still record the video and preview it in playback mode. - Name Change the camera name. - Description Add a short comment. (4) Video A dj ustment Adjust the Brightness, Contrast, Hue and Saturat[...]

Chapter 5 Customizing NV DVR Sy stem 50 2. Enable Detected Regions in Dis play section. This enables the object counting information show on the screen. Moving Object will enable the object size frame to show on the screen. 3. Click Region1 and press left button of mouse and drag the area that user wants the object to be counted. And then, click Re[...]

NV3000/5000/6000(EXP)/7000H User Manual 51 5.3 Recording Setting In the Recording dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Default to revert back to original factory setting. (1) Camera Icons Select the camera number you want to set the recording setting. T o select all the cameras, enable the [...]

Chapter 5 Customizing NV DVR Sy stem 52 (3) Enable Audio Select to assign the audio channel of the selected camera. Y ou can only assign one audio channel to one camera source. This way you can record both audio and video. i An Audio I/O card is required to use this function. (4) Motion Detection Adjust the sensitivity of the motion detector . The [...]

NV3000/5000/6000(EXP)/7000H User Manual 53 MPEG4 MPEG 4 Encryption H264 H264 Encryption MJPG NV 3000 9 9 9 9 9 NV 5000 9 9 9 9 9 NV 6000 9 9 9 9 NV 6000 Express 9 9 9 9 NV 7000H 9 Using the Advanced MPEG4 enables you to enc r ypt the recorded video that way onl y the person who knows the password can clearly view the video playback. The file size w[...]

Chapter 5 Customizing NV DVR Sy stem 54 T o encrypt the recoded video back, click and enter a WRONG password. i It is important to encrypt the video again, to avoid unauthorized user viewing the video. 5.4 Network Setting IIn the Network Setting dialog box, click OK to accept the new settings, click Cancel to exit without saving, and click Default [...]

NV3000/5000/6000(EXP)/7000H User Manual 55 and register .(also see Appendix A ) Y ou will be prompted to enter CD key number , product name, password, and user information. Use this service if the IP address changes each time when you connect to internet. (5) Remote Control Ser ver Enable/disable remote control from remote application (ex. CM3000).[...]

Chapter 5 Customizing NV DVR Sy stem 56 - Enable Handy View Enable remote users to use a PDA or a mobile phone to access NV DVR server and select the video size and quality . (See also Chapter 8. 5 and 8.6 ) - Network Bandwidth Limit By Channel: Set the network bandwidth by each channel. All: Set the total network bandwidth consumption limit.[...]

NV3000/5000/6000(EXP)/7000H User Manual 57 5.5 Schedule Setting Schedule to record, backup, enable network, r eboo t and disable alarm of all the cameras either weekly or one time. The number from 00 to 23 represent the time in 24-hour clock. The left most column display the days in a week. T o Set th e Schedule Setting: 1. Select the date in the c[...]

Chapter 5 Customizing NV DVR Sy stem 58 5.5.1 T o set sch edule at a specific portion of time in that hour: 1. Right click the colored blocks. 2. In the Select time dialog box, click to enable or disable the portion you want to set. 3. Click OK to accept the setting and Cancel to exit without saving the setting.[...]

NV3000/5000/6000(EXP)/7000H User Manual 59 5.6 Backup Setting In the Backup Setting dialog box, the number from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 represent the camera number . When you back up the file, you may find QLog Viewer and Player application included in the backup folder (see also Chapter 6 ). T o Back[...]

Chapter 5 Customizing NV DVR Sy stem 60 9. In CD/DVD Backup, enable/disable Delete file after burning check box to remove the archived file after burning. Click Burn to start and Exit to cancel this process. 5.7 Sensor Setting The I/O device must be installed to use this function. The NV DVR system also support external I/O box and user can install[...]

NV3000/5000/6000(EXP)/7000H User Manual 61 5.9 Alarm Setting In the Alarm Setting dialog box, click Ad d to insert and set new alarm setting, click Delete to remove the selected alarm setting, click OK to exit and save the setting, Cancel to exit without saving, and Default to revert back to original factory setting. (1) (2) (3) (4) (5) (6) (7) T o[...]

Chapter 5 Customizing NV DVR Sy stem 62 - Enable/disable the Abnormal Event check box, to set the condition of the event for system to alarm. • Normal Reboot: when the NV DVR s ystem reboot without abnormal condition, the system will send out the alarm message. • Abnorm al Reboot: when the NV DVR system reboot in irregular condition, the system[...]

NV3000/5000/6000(EXP)/7000H User Manual 63 7. In (6) Action , yo u may now set the alarm action for the system to p erform when the alarm condition is activated. - Launch E-Map Display mini Emap screen. - TV Out Switch to only display the video on TV from where the alarm is activated or selected camera. a. Select the camera from drop down list to s[...]

Chapter 5 Customizing NV DVR Sy stem 64 - Relay Output Set to enable/disable the relay operation when the alarm is activated and to extend additional time in second before it st ops the relay operation (see also Chapter 5.9.1 ). - Play W ar ning Sound Play alarm sound. T o setup click Det ail (see also Chapter 5.9.2 ). - Make Phone Calls Dial and c[...]

NV3000/5000/6000(EXP)/7000H User Manual 65 5.9.1 T o Setup Alarm Relay: 1. Beside the Relay Output check box, click Detail . 2. In the Alarm Relay dialog box, select from the available rela y list and in the ON column, set to enable/disable the relay operation when the alarm is activated. In the Retrieve time check box, you may enable/disable to ex[...]

Chapter 5 Customizing NV DVR Sy stem 66 5.9.3 T o Setup Call Out List: 1. Beside the Make Phone Calls check box, click Det ail . 2. In the Call Out List, click Ad d to insert a new contact number , Modify to edit the selected item, Remove to delete the selected item, T est to check if it is working. 3. In the Call Out Setting, enter the phone numbe[...]

NV3000/5000/6000(EXP)/7000H User Manual 67 T o a nd CC: Enter the recipient email address and separate it with comma or a semicolon (;). Subject: Enter the messa ge title. Message: T ype the message. (3) Email Notice Setting Notice Inter val: Set the period of time before it sends another e-mail notice. Embedded image : Select the image size and se[...]

Chapter 5 Customizing NV DVR Sy stem 68 5.9.7 T o Setup SMS/MMS Setting: T o use this feature, GSM/GPRS m odem is required. Connect the GSM/GPRS modem to the serial COMM port of PC. Beside the SMS/MMS check box, click Det ail . 1. Select the port number in ComPort drop down list from where the GSM/GPRS modem is connected. 2. Click Modem Setup butto[...]

NV3000/5000/6000(EXP)/7000H User Manual 69 5.9.10 T o Setup CMS Settin g Beside the Send to CMS check box, click Detail . In the CMS Setting, select the camera to enable/disable sending the video to CMS. Enable Al l to select all cameras. Then, click OK to accept the new settings and Cancel to exit without saving. 5.9.11 T o Setup POS Key word Sett[...]

Chapter 5 Customizing NV DVR Sy stem 70 4. Use the mouse to click and drag the frame on the screen. User can drag more than one frame. 5. Sensitivity: Set the system detects sensitivity . 6. Delay Time: Set the lasting time for system to detect the object. 7. T o reset all object frames, click Clean . T o clean an object frame, click right button o[...]

NV3000/5000/6000(EXP)/7000H User Manual 71 - Scene Change When the camera has been moved, the system will alarm. 1. Select the camera number (0-16) and press right button on the mous e to call up the setup windows. And then, click the Scene Ch ange T ab. 2. Click Save to capture the image for comparing reference. T o view the captured image, enable[...]

Chapter 5 Customizing NV DVR Sy stem 72 After clicking Add or Edit , you m ay customize the user control setting. OK to exit and accept the setting, and Cancel to exit without saving the setting (1) (2) (3) (4) (5) (6) (7) (8) (1) Authorization le vel Select the status of the user . Onl y Administ rator-level can access User Setting, and re set the[...]

NV3000/5000/6000(EXP)/7000H User Manual 73 (6) Description Enter the user description. (7) Password Enter the user password. (8) Confirm Passw ord Enter the same user password for confirmation.[...]

74 Chapter 6 Backup Vid eo Players Y ou can playback the backup files using QLogVie wer and Player applications. When you back up the recorded file, QLogViewer and Player applications are automatically included in the backup folder . QLogViewer can only playback one video at a time. It only comes with video segmentation, output segmentation, captur[...]

NV3000/5000/6000(EXP)/7000H User Manual 75 Name Function (1) T ime Display the file date, time and play speed. (2) File Display the path where the file is located. (3) Playback Control Buttons Begin: Move to the beginning of the recorded video file. Previous: Go back to the previous frame. Slower: Play the recorded video file at the speed of 1/2x, [...]

Chapter 6 Backup Video Player 76 6.2 Familiarizing the Player Buttons (3) (5) (4) (6) (8) (7) (10) (9) (11) (12) (13) (14) (17) (16) (15) (1) (2) Name Function (1) S pl it Screen Mode Select from six (6) different split screen type to playback the recorded video file of all the camera, or one camera over the other or alongside on a single screen. i[...]

NV3000/5000/6000(EXP)/7000H User Manual 77 Name Function (6) Date Select the date on the calendar and the time from 00 to 23 to where to start playing the recorded video file. i The numbers from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 represent the camera ID. The blue colored column indicates that there is a recorded[...]

78 Chapter 7 Using Functiona l Keys The NV DVR system provides shortcut ke ys. The table shows the function keys and descriptions. Function Keys description F1 Display system information F2 S tart recording F3 Enable network function F4 Access sy stem settings F5 Switch to playback mode F6 Access E-map setting F7 Access PTZ camera control panel F8 [...]

79 Chapter 8 Using the Remo te Programs Y ou can use Microsoft Internet Explorer to a ccess NV DVR server by entering the IP address or domain name. T o use this feature, make sure that you are connected to the intern et and the Network feature is enabled. Accessing this feature for the first time you will be prompted by your browser to inst all We[...]

Chapter 8 Using the Remote Programs 80 8.1 Familiarizing the NV DVR WebVie wer Buttons Right-clicking on the webcam video screen, enables you to start video recording, change video quality , switch camera and enable/disable DirectDra w . (1) (4) (5) (8) (13 ) (6) (7) (9) (10 ) (11 ) (12 ) (14 ) (15 ) (2) (3) Name Function (1) DirectDraw Enhance the[...]

NV3000/5000/6000(EXP)/7000H User Manual 81 Name Function (10) Remote E-Map Display the NV DVR server Emap screen (see also Chapter 4.7 ). (1 1) Remote setup Change the NV DVR server settings (see also Chapter 8.1.1 ). (12) Select a PTZ camera Initiate PTZ camera control ler (see also Chapter 8. 2 ) (13) Snapshot Capture and save the screen shot in [...]

Chapter 8 Using the Remote Programs 82 8.1.1 T o Setup Remo te System Setting Click OK to exit and save the setting and Cancel to exit without saving the setting. The setting here applies to Remote DVR only . (11) (12) (13) (14) (10) (1) (9) (8) (7) (6) (5) (4) (3) (2) (1) Camera Name Select the camera you want to adjust the settings. (2) Enable Se[...]

NV3000/5000/6000(EXP)/7000H User Manual 83 - Motion Recording S tart recording the video from the selected camera onl y when the system detects motion. Once a motion is detected, the sy stem automatically saves the previous frames and stop based on the Start Record Prior and Stop Record After settings. - Smart Recording Automatically switch to reco[...]

Chapter 8 Using the Remote Programs 84 8.2 Familiarizing the WebVie w er PTZ Buttons (4) (3) (2) (5) (6) (1) Name Function (1) Direction buttons Adjust and position the focal point of the PTZ camera. Click the center to pan automatically . (2) Select PTZ Choose to enable/disable the PTZ camera. In the Select PTZ dialog box, Select column, clic k to[...]

NV3000/5000/6000(EXP)/7000H User Manual 85 8.3 Familiarizing the Re mote Console Buttons (1) (3) (8) (7) (6) (5) (4) (9) (10) (12) (13) (14) (15) (2) (11) Name Function (1) Exit Close the Remote Console. (2) V olume Enable/disable the sound. (3) S pl it Screen Mode Select from six (6) different split screen type to playback the recorded video file [...]

Chapter 8 Using the Remote Programs 86 Name Function (13) Snapshot Capture and save the screen shot either in *.jpg or *.bmp format. (14) Full screen Use the entire area of the screen to only display the video. T o return, Right click the mouse or press ESC on the keyboard. (15) Alarm Alert and display warning info . Only Administrator-l evel can r[...]

NV3000/5000/6000(EXP)/7000H User Manual 87 8.4 Using the R emote Play back T o use this feature, first you need to select the source of the file. In the Select Playback Mode dialog box, choose Local Playback to open the file that is recorde d in the Remote Console, and Remote Playback to open th e file that is recorded in the NV DVR server . When y[...]

Chapter 8 Using the Remote Programs 88[...]

NV3000/5000/6000(EXP)/7000H User Manual 89 8.4.1 Familiarizing th e Local Playback Buttons (2) (4) (3) (5) (6) (9) (8) (7) (10) (11) (12) (13) (1) Name Func tion (1) S plit Screen Mode Select from six (6) different split screen types to playback the recorded video file of all the camera, or one camera over the other or alongside on a single screen.[...]

Chapter 8 Using the Remote Programs 90 Name Func tion (4) Playback Control Buttons Next: Go to the next frame. End: Go to the end of the recorde d video file. (5) Date Select the date on the calendar and the time from 00 to 23 to wher e to start playing the recorded video file. i The numbers from 00 to 23 represent the time in 24-hour clock. The nu[...]

NV3000/5000/6000(EXP)/7000H User Manual 91 8.4.2 Familiarizing the RealTime Playback Buttons (2) (4) (3) (5) (6) (9) (8) (7) (10) (11) (1) Name Function (1) S plit Screen Mode Select from two (2) different split screen type to playback the recorded video file of all the camera, or one camera. i - If there are only 4 cameras, you won’t be able to [...]

Chapter 8 Using the Remote Programs 92 Name Function (5) Date Select the date on the calendar a nd the time from 00 to 23 to where to start playing the recorded video file. i The numbers from 00 to 23 represent the time in 24-hour clock. The numbers from 01 to 16 represent the camera ID. The blue colored column indicates that there is a recorded vi[...]

NV3000/5000/6000(EXP)/7000H User Manual 93 8.4.3 Familiarizing the Download and Playback Buttons (2) (8 ) (7 ) (4 ) (6 ) (5 ) (1) (3) Name Function (1) Progress bar Show the progress of the file being played. Y ou may move the bar to seek at any location of the track. (2) Playback Control Buttons Begin: Move to the beginning of the recorded video f[...]

Chapter 8 Using the Remote Programs 94 support IE browser and is connected to the internet. T o use this feature, you need to install the PDA Viewer software either thru ActiveSync connection or download it from th e internet. Please check if your PDA meets the 2 requirements below . OS: MS Windows CE 4.0, PocketPC 2002/2003, Mobile 5 PDA version C[...]

NV3000/5000/6000(EXP)/7000H User Manual 95 8.6.2 T o install PDA Viewer from the Internet Make sure you are connected to the internet. 1. Open the web browser and enter the server IP . Then click the hyperlink Download PDA-Viewer . 2. When the Download dialog box appears, enable Open file after download and click Ye s . After the inst allation, the[...]

Chapter 8 Using the Remote Programs 96 8.6.3 T o Use th e PDA Viewer 1. Run the PD A-V i ewer 5.5 in the Programs. 2. Familiarizing the PDA Viewer buttons. (7) (6) (5) (3) (4) (8) (9) (10) (1) (2) Name Function (1) Connect Hook up to the NV DVR server. Make sure you are connected to internet. When the iView screen appears, enter the server IP , por[...]

NV3000/5000/6000(EXP)/7000H User Manual 97 3. T o change the video qualit y , enable/disable audi o, and select to display different camera, tap on the video screen longer the pop up menu will appear . 8.7 Using Java-Viewer to Access NV DVR Server Using the mobile phone within Symbian Smart Phone OS to access the NV DVR thr ough Internet. Make sure[...]

Chapter 8 Using the Remote Programs 98 8.7.2 T o Use the J A V A-Vie w er 1. Run the JA V A-Viewer program. 2. Enter the DVR IP address, port number , user ID, and password. Please refer to your DVR server setting for that information. 3. And then, select the Connect to connect to DVR server . 4. Click Ye s to accept the data from DVR server . 5. W[...]

NV3000/5000/6000(EXP)/7000H User Manual 99 6. T o switch to different camera view , select menu and select the channel. 7. The JA V A-Viewer support PTZ co ntrol function, you can refer to Help file for detail function control key . Select menu and go the way down to select the Help file. →[...]

100 Chapter 9 Image Verification ImageV erification is a watermark-checking progr am to identify the authenticity of a saved image (e.g. by snapshot). This program can only verify uncompressed bmp image files. 9.1 To Run the ImageVerification p rogram 1. Click Start > Programs > DSS > Ima geVerification . 2. In the ImageVerification screen[...]

101 Chapter 10 iEnhan ce The bundled iEnhance is a video editing tool and can only be used with *.dvr video file. It allows you to adjust the video picture quality , segment and save the wanted portion of the video, zoom in and out the image, and print o r save the screen shot. Y ou can als o save the setting and apply it on other files. (1) (2) (4[...]

Chapter 10 iEnhance 102 Name Function (13) Sharpness Improve the overall image by enhancing edges. This gives the image more depth. (14) Effect s • Gray Scale : convert the image into black and white (monochrome). • Normalize: adjust the brightness intensity . • Equalize: automatically adjust the images that are too dark. • De-interlace: sm[...]

103 Chapter 11 Web Tools The bundled Web T ools includes Dispatch Serv er and Remote Back up program. T o install Web T ools, place the CD into the CD-ROM drive then click Install Web T ools . 11.1 Dispatch Ser ver Dispatch is designed to reduce the network traf fic of the NV DVR server . Instead of connecting directly to the NV DVR server , the cl[...]

Chapter 11 Web Tools 104 11.2 Remote Back up Remote Backup is purely for backing up the *.dvr file from the NV DVR sever . Y ou can select between Auto Backup and Manual Backup. Auto Ba ckup continuously archives one hou r of th e recorded data at a time, starting from the specified date. As for Manual Backup, it only archives the recorded data of [...]

NV3000/5000/6000(EXP)/7000H User Manual 105 - Click Add to set the storage path. - Click Delete to remove the selected storage path. - Click Schedule t o select/unselect the time you want to backup. The red block turns white when it is unselected. - Enable/disable Disk Rec ycle check box, to automatically overwrite the oldest file when there is not[...]

106 Chapter 12 Using the Remote Control Server The bundled Remote Control Server enables the PC with Central Management System program (CM3000) installed in it remotely access the NV DVR server . Y ou may need to manually run this program for CMS access the NV DVR server. T o run, click Start > Programs > DSS > DVR > Remote Control Serv[...]

107 Appendix A Registering Domain Na mes DDNS (Dynamic Domain Name Service) is a dat a query service mainly used on the Internet for translating domain names into Internet addres s es. It allows remote client s to intelligently search dynamic servers without any previous enquiring for servers’ Internet addresses. In order to take advantage of thi[...]

108 Appendix B Configure UPnP NV DVR application support UPnP function that can automatically configure the port setting to the local router . Please make sure the following items are true for the UPnP to work able: - Window XP service Pack 2 is require - Window XP must be configured to use UPnP - UPnP must be enabled on your r outer (Please contac[...]

109 4. Mark the UPnP Framework check box and click OK.[...]

1 10 Appendix C Net w ork Service Port The following table shows the ports that DVR server uses for certain network service. Port # Variable Remote Console (CM 300 0) 5550 Y WebC am 80 Y 2-way audio 9999 Y Remote Control (CM3000/RC10 00) 5555 Y DVR POS 5150 Y DVR DDNS (Upload / Dow nload) 53 / 1053 N[...]

111 LIMITED WARRANTY A VerMedia TECHNOLOGIES, Inc. warrants that this product to be fr ee of defect s resulting from faulty manufacturing or component s under the following term s: W ARRANTY LENGTH Labor is warranted for 15 months from the date of pu rchase. Replacement pro ducts will be warranted for the remainder of the 15-mon t h warranty period[...]