Baumatic BDF671SS manuale d’uso

BDF671SS/BDF671W 60 cm Freestanding dishwasher[...]

USER MANUAL FOR YOUR BAUMATIC BDF671SS/BDF671W 60 cm Freestanding full height electronic dishwasher NOTE : This User Instruction Manual contains imp ortant information, including safety & installation p oints, which will enable you to get the most out of your appliance. Please keep it in a safe place so that it is easily available fo r future r[...]

3 Contents E n v i r o n m e n t a l n o t e 4 Important safety information 5 – 7 S p e c i f i c a t i o n s 8 Product and aperture di mensions 8 P r o d u c t s p e c i f i c a t i o n s 8 Energy efficiency details 8 E l e c t r i c a l d e t a i l s 9 Description of the appliance 9 C o n t r o l p a n e l 1 0 U s i n g y o u r d i s h w a s h [...]

ENVIRONMENTAL NOTE Note : Before discarding an old appliance, switch off and disconnect it from the power supp ly. Cut off and render any plug useless. Cut the cable off directly behind th e appliance to prevent misuse. This should be undertake n by a competent person. Disable the door lock to make sure that children cannot get stuck inside the app[...]

IMPORTANT SAFETY INFORMATION Your safety is of the utmost importance to Baumatic. Please make sure that you read this instruction booklet before attempting to install or use the appliance. If you are unsure of any of the info rmation contained in this booklet, please contact the Baumatic Technical Department. General Safety o Repairs to your applia[...]

6 o Care should be taken not to trap the power supply cable underneath the appliance whilst installing it. o No attempt should be made to al ter or modify the specifications of this appliance. In daily use o This appliance is only designed to wash normal domestic washloads. If you use your dishwa sher in any other way or it is incorrectly used, the[...]

7 Child Safety o Your dishwasher should only be used by adults. You should not allow children in the area of the machine unsupervised. You should not let them touch the cont rols or play with the appliance. o It could be possible for a child or pet to gain access to the dishwasher if the door is left open. Therefore please check the inside of the a[...]

Specifications Product dimensions Height: 850 mm Width: 600 mm Depth: 600 mm Product specifications o 14 Place settings o 8 functions: Normal Intensive Economy Rinse Glass Rapid 3 in 1 Autowash o 5 Wash temperatures: 40°C, 45°C, 50°C, 60°C, 50-60°C o Delay timer o LCD display o Self-cleaning stainless steel microfilter o Electronic aqua stop o[...]

Energy efficiency details Energy efficiency class: A Washing performance class: A Drying performance class: A Electrical details Rated voltage: 230 Vac 50 Hz Supply connection: 13 A (double pole switched fused outlet with 3 mm contact gap) Description of the appliance 1) Upper basket 2) Spray arms 3) Lower basket 4) Water softener 5) Main filter 6)[...]

Control panel 1) ON/OFF button 2) LCD display 3) Delay start buttons 4) Half load button 5) Program selection buttons 6) Salt warning light 7) Rinse aid warning light 8) Program lights Using your dishwasher Before first use o Install the appliance as per the installation instructions contained within this booklet. o Fill the water softener with 1 l[...]

Filling with dishwasher salt IMPORTANT: You should only use salt that is specially designed for use in a dishwasher. If any other type of salt is used in the appliance (in particular table salt), it will damage the water softener. o Ideally you should fill the water softener with salt, just before you are about to run a wash program. This will help[...]

o IMPORTANT: You do not need to pour 1 litre of water into the container when you subsequently fill t he water softener with salt. Setting the water softener level It is possible to regulate the amount of salt that the water softener will release during a wash cycle. The wa ter softener should be set to a level that is appropriate for the hard ness[...]

These droplets will lead to spots an d streaks being left on items after the wash program has completed. o Your dishwasher is designed to utilise liquid rinse aid. o The rinse aid dispenser is locate d inside the drop down door, next to the detergent dispenser. o To access the rinse aid dispenser, you should turn the cap anticlockwise and it will p[...]

o If you get cloudiness or streaking on your dishes, the rinse aid level is set too high and it is causing foaming during the wash cycle. Turn the arrow clockwise an d lower the setting to the next number. Filling with dishwasher detergent The detergent dispenser must be ref illed at the start of each wash cycle (apart from the Rinse wash program).[...]

Loading the upper basket The upper basket is most suited to washing delicate and light dishware, such as glasses, coffee & tea cups, saucers, plates, bowls and shallow pans (that are not heavily soiled). 1. Cups 2. Small serving bowl 3. Large serving bowl 4. Glasses 5. Saucers 6. Dish 7. Dessert dishes o You should position the dishes an d cook[...]

Adjusting the upper basket Your dishwasher has an adjustable upper basket which you can alter to the most suitable position for the items you are going to wash in the upper basket. The height of the upper basket can be adjusted by pulling the handle on either side of the basket up wards until it clips into place. Position 1 (u pper position) o For [...]

IMPORTANT: Care should be take n to make sure that the spray arms can move freely when items have been loaded into the baskets. Loading the lower basket The lower basket is most suited to washing larger and more heavily soiled items, such as saucepans, sa ucepan lids and serving dishes. You can also load bowls and a variety of plates into the lower[...]

The cutlery basket Cutlery should be placed inside of the cutlery basket. The cutlery basket should then be placed in th e appropriate position in the lower basket. o For the best washing performance, cutlery should be placed through the slots in the top of the cutlery basket. o For ease of loading, it is possible to split apart the outer section o[...]

19 gh of the basket begins to deteriorate and allows items to fall through, you should repl ace the cutlery basket. oths, sponges or any other ob ject that may absorb water SHOULD NOT be washed in a o Remove leftovers and soften the remnants of burnt food in pans, o t the spray arms can move freely. If the spray ar m comes into contact with any o C[...]

20 ollowing items are NOT suita ble for washing inside a dishwasher:- o Cutlery with a handle of mother-o f-pearl, wood, horn or china. Plastic items that are not resistant to heat. o Cutlery that consists of glued part s that are not resistant to heat. o Cutlery items or crockery that are bonded. o Copper or pewter items. o Lead crystal glass. o W[...]

21 rogram table Normal is the testin g program for EN 50242. etting a wash program that the before first use section has been ollowed. o Check whether the appliance needs ri nse aid or salt adding to it. o load them in accordance with the loading instructions. d bottom baskets fully back into position. P * S Make sure f Pull out the top and bottom [...]

22 Add detergent o on by usin g the ON/OFF button; the ON/OFF light will come on. o herwise the appliance may not function correctly. o gram se lection button that you have pressed will come on. o options that you want to use (e.g. delay start or half load). o Close the door firmly, so that yo u hear the door lock click shut. o begin to fill with w[...]

23 t the end of a wash program o At the end of a wash program a buzzer will sound. o Open the door of the appliance. o Use the ON/OFF button to switch the dishwasher off. o Wait for a few minutes before unloading the dishwasher. o hilst they are still hot, as they are more susceptible to breakage. he 3 in 1 wash program salt he water softener has b[...]

o Put a 3 in 1 tablet inside the 3 in 1 tablet container. Load the appliance as normal and sele ct the 3 in 1 wash program. If your wash results are poor, then we would recommend that you use a dishwasher detergent that doesn’t have rinse aid and salt included in the tablet. The water softener should then be adjusted to an appropriate level for t[...]

o You can delay the start of the wash cycle by a maximum of 24 hours. Each time you press a bu tton, the delay start time will adjust by one hour. o Close the door firmly, so that yo u hear the door lock click shut. o Once the period of time that yo u set has passed, the dishwasher will start the wash program that you selected. Setting a half load [...]

Cleaning and maintenance IMPORTANT: The appliance should be disconnected from your mains supply before commencing any cleaning process. The filter system Your appliance is fitted with three le vels of filterin g; these are located in the base of the dishwa sher for ease of access. 1) Main filter 2) Coarse filter 3) Fine filter Main filter- Food and[...]

Cleaning the filters For best performance and results, the entire filter assembly should be thoroughly cleaned regularly (ide ally after each wash cycle). 1. Turn the coarse filter anti-clockwise and then lift it upwards. Rinse out this section under a tap to remove any food debris that remains in it. 2. Pull out the main filter and rinse this unde[...]

Cleaning the spray arms The spray arms should be cleaned regularly, to prevent hard water deposits from clogging the spray arm jets and bearings. o To remove the spray arm, unscrew the nut and take out the washer that sits on top of the spray arm. o Gently pull upwards to remove the spray arm. o Wash the spray arm in warm, so apy water and use a so[...]

Cleaning the door o To clean the edge around the outs ide of the door, you should use a soft, damp cloth only. o To prevent water from penetratin g the door lock or electri cal components, DO NOT use a spray cleaner of any kind. o DO NOT use any abrasive cleaner or scouring pads on the inner or outer surfaces, as they may cause damage to them. Erro[...]

E3 o Longer heating time- not reaching the required temperature. 9 Malfunction of the temperatur e sensor or heating element. 9 Call Baumatic Service Department. E4 o The machine has sensed water in the base. 9 Check that the outlet hose is not kinked or crushed. 9 Check that there are no blockages in the drain hose or the drainage system that the [...]

IF THE FAULT CODE REAPPEARS AFTER FO LLOWING THE ABOVE ADVICE AND CLEARING THE FAULT CODE. YOU SHOULD TURN OFF THE APPLIANCE; DISCONNECT THE APPLIANCE FROM YOUR MAINS SUPPLY. THEN ARRANGE FO R AN ENGINEER TO ATTEND THE APPLIANCE. YOU SHOULD CONTACT BAUMATIC SERVICE ON TELEPHONE NUMBER (0118) 933 6911. 31 ALL. IF AN ENGINEER ATTEND S DURING THE GUAR[...]

32 Motor hums If the dishwasher is not going to be used for a period of ti me, then you should make sure that the applian ce is set on a wash program once a week. Otherwise the seal around motor may dry out and cause noise. Suds in the tub Spilled rinse aid Always wipe up any ex cess rinse aid or rinse aid spillages immediately. Stained tub interio[...]

Installation IMPORTANT: THIS INSTALLATION MUST BE COMPLETED BY A SUITAB LY QUALIFIED PERSON. BAUMATIC ONLY SANCTION THE INSTALLATION GIVEN IN THIS INSTRUCTION MANUAL. YOU SHOULD DISPOSE OF A LL PACKAGING IN AN ENVIRONMENTALLY FRIENDLY MANNER. Positioning and leve ling the appliance 9 Remove all packaging from th e outside and inside of the dishwash[...]

IMPORTANT: When the dishwasher is positioned in the location where it will be used. Make sure that all four feet are resting firmly on the floor, by pressing down on each corner and checking that the appliance stands still. Connecting to the mains water supply 34 ed. IMPORTANT: Do not connect the app liance to your mains water supply using an old o[...]

Connecting to the water outlet 9 Secure the drain hose, so that it cannot move whilst the dishwasher is in use. 9 Place the end of the drain hose on your drain pipe. Push it a short way down into your drain pipe. 9 IMPORTANT: Do not insert the drain ho se too deeply into the pipe, as this may cause siphoning. 9 NEVER EXTEND THE DRAINAGE HOSE FROM I[...]

9 Consult the rating plate, located on the right hand side of the drop down door BEFORE making the electrical connections. Ensure that the voltage reaching the plug is the same as t hat on the rating plate. 9 DO NOT REMOVE THE RATING PLATE AS THE INFORMATION ON IT IS IMPORTANT. 9 The moulded plug that is supplied with the appliance must be placed i[...]

Czech Republic Baumatic CR spol s.r.o. Amperova 495 46215, Librec Czech Republic United Kingdom +420 800 185 263 Baumatic Ltd., Baumatic Buildings, www.baumatic.cz 6 Bennet Road, Reading, Berkshire Slovak Republic RG2 0QX Baumatic Slovakia, s.r.o. United Kingdom Skultetyho 1 831 04 Bratisl ava 3 Sales Telephone Slovakia (0118) 933 6900 Sales Fax +4[...]

38[...]

39[...]

40 40[...]