Beko 40WLU530HID manuale d’uso

I N T E G R A T E D D I G I T A L H D R E A D Y C O L O U R T E L E V I S I O N S Operating Instructions 40WLU530HID[...]

TABLE OF CONTENTS 1.Important Information ............................................................... 1 1.1-Cleaning the screen and cabinet... ....................................................... 1 1.2-Disposing of your TV at the end of service life... ................................... 1 1.3-Superior features of your integrated digital tel[...]

1 LCD panels are produced with state-of-the-art technology. However, there may be missing or lit spots on the screen under certain circumstances. That does not mean that the product is faulty. 1.1-Cleaning the screen and cabinet... After powering off, wipe the screen and the cabinet clean with a soft and dry cloth. We recommend that you do not use [...]

2 IMPORT ANT The wires in the mains lead are coloured in accordance with the following code: Blue - Neutral Brown - Live As the colours in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: The wire which is coloured blue or black must be connected to the termin[...]

3 2 Thank you for buying this television which is designed to give you many years of satisfactory service. You may already be familiar with using a television but do please take time to read these instructions. They are designed to familiarise you with the tv’s many new features and to ensure you get the vary best out of your purchase. 2.1-Specia[...]

4 3 This symbol is used to warn the user about the “dangerous voltage” contained inside the TV that may create a risk of electrical shock. This symbol is used to remind the user important usage and service instructions supplied with the TV. 1) Please READ the operating instructions before using the TV for the first time. 2) Please observe the i[...]

5 10) Never operate your TV close to water. Operating your TV, for example, near a bathtub, washbasin, wet basement and swimming pool can cause fire or electric shock. • Do not allow your TV to get wet. Never pour any liquids onto the TV. Do not operate your TV if any solid or liquid substance enters into it. This can cause electric shock and you[...]

6 18) Wipe the TV cabinet clean with a soft and dry cloth. Wipe dust from the screen gently with a soft cloth. Stubborn stains can be cleaned with a cloth slightly moistened with soap and lukewarm water. Never use solvents such as thinner or gasoline for cleaning. Unplug the AC mains lead from the socket when cleaning the TV. Otherwise, there is th[...]

7 Note1: Your TV does not have a seperate on/off switch, therefore to switch the power completely off (i.e. not on standby), switch off or unplug the TV at the mains socket. Note2: Your TV is equipped to operate with TV buttons in case your R/C is broken or the batteries are exhausted. 3. Press the power on/off button located on the LCD TV. 4. To p[...]

8 5 5.1-TV Control Panel or Program Down/Up button or Volume Level Down/Up button or On-Off / Standby button or or Stand by indicator Bright light: TV is in Stand-by Dimmed light: TV is On No light: Power Cable is not connected. or Menu button / Source selection button 5.2-Rear and Side External Connections 1-Power input 2-AV1 scart 3-AV2 scart 4-A[...]

9 5.3-Remote Control Stand-by mode On/Off button Temporary sound mute (Mute) button AV modes selection menu button Picture Format selection button PAT (Picture and Teletext) Mode ZOOM mode selection button Subtitle selection button (D) Sound selection button (D) Numeric buttons Favorite channel selection button (D) Page Stop button in Txt mode (Hol[...]

10 6 PR 01 PR 11 PR 01 MENU MAIN MENU SOUND PICTURE PROGRAM T ABLE SETUP FEA TURES SELECT EXIT 6.1-TV controls 6.1.1-Temporary on/off (STAND-BY) When you press the red STAND- BY button located on the upper left hand side of your remote control while your television is switched on, the sound and the picture will go off. In the stand-by mode, the pow[...]

11 COUNTRY SELECTION BELGIUM CZECH REP DANMARK DEUTSCHLAND ELLADA ESP ANA FRANCE HUNGARY IRELANDA IT ALIA NETHERLANDS NORGE ÖSTERREICH POLSKA SCHWEIZ SUOMI SVERIGE TÜRKİYE U.K. .......................... ST ART AUTOPROGRAMMING 6.2-Turning on the TV and Setting the Channels When you turn on your television for the first time, FIRST TIME INSTALLAT[...]

12 6.3.2-Manual tuning of channels and storing in the memory In digital mode: Press MENU button, MAIN MENU will be displayed. Select SETUP tab with Down movement button and confirm with the OK button. SETUP menu will be displayed. Select MANUAL TUNING tab and confirm by pressing the OK button. Manual Search Parameters menu will be displayed. Manual[...]

13 6.3.3.1-Displaying Television and Radio channel lists and selecting the channels When the program table menu is opened, all TV and radio channels stored in the list are displayed. You can navigate between the channels with Up/Down , Left/ Right movement buttons or you can select any channel you wish by pressing the OK button. Note: You can also [...]

14 6.3.5-Digital Features To enter digital features menu, select FEATURES tab from the main menu by using Up/Down movement buttons. Select DIGITAL FEATURES tab from FEATURES menu by using Up/Down movement buttons and press OK button to confirm. DIGITAL FEATURES menu will be displayed. You can select the menu headings with Up/ Down movement buttons [...]

15 6.3.5.5-Favourite Lists Please see 6.3.3.2-Creating favorite channel list for detailed explanation of this feature. 6.3.5.6-Common Interface Module To receive subscrıption channels you will need to purchase a conditional access module (CAM) and card. When no cam is fitted the display will show “No Common Interface module present.” However w[...]

16 6.4.2-Manual tuning of channels and storing in the memory 6.4.2.1-If you already know the channel number (See page 31) Press the MENU button. Move to the SETUP menu by pressing the Down movement button in the Main Menu and MENU SETUP SELECT BACK SYSTEM CHANNEL FINE TUNE SEARCH PROGRAM NO STORE AUTOPROGRAM I S06 0 P13 confirm your selection with [...]

17 6.4.4-Program Table Press the MENU button. Move to the PROGRAM TABLE tab by pressing the Down movement button in Main Menu and confirm your selection with the OK button. Program Table menu will be displayed. after this program number. After setting is complete, press the EXIT button to exit the menu. 6.4.4.3-Skipping a stored channel In the even[...]

18 7 MENU SOUND VOLUME BALANCE SOUND TYPE SOUND MODE A VL EQUALIZER HEADPHONE SRS STEREO NORMAL OFF CHANGE BACK Settings of Your New Television 7.1- Sound Menu Settings You may perform volume settings by using the VOL+ or VOL- buttons on your television or the VOL+/VOL- buttons on your remote control. You can perform other Sound settings by enterin[...]

19 MENU PICTURE AUTO COOL OFF CHANGE BACK BRIGHTNESS CONTRAST COLOR SHARPNESS DNR COLOR TEMPERA TURE ACTIVE CONTRAST BACKLIGHT 7.1.6.1-TruBass TruBass system is a signal processing technology that reinforces the bass sounds. 7.1.6.2-Dialog Clarity This feature enhances the understandability of speech dialog. Note: When the SRS is set to On, AVL and[...]

20 7.2.2-DNR (Noise reduction) (Optional) You may reduce interference and noise formed in the picture by using this feature. Select DNR tab in the Picture menu with the Up/Down movement buttons to activate this feature and select one of the OFF , LOW , MID , HIGH or AUTO options with Left/ Right movement buttons. 7.2.3-Color Temperature You can adj[...]

21 7.2.9.2-16:9 Please use this setting for watching wide screen DVDs, wide screen video cassette or 16:9 formatted broadcasts. Since various screen formats such as 16:9, 14:9 and etc. are used, black stripes might be formed on the lower and upper parts of the screen. MENU FEA TURES OFF OFF OFF CHANGE BACK TIMER CHILD LOCK ACTIVE ANTENNA AUTO SCART[...]

22 MENU TIMER CHANGE BACK CLOCK ON TIME OFF TIME ON TIMER LIST PROGRAM NO - - : - - - - : - - - - : - - ANALOG P01 Time data is obtained from Teletext; if no time data is available then select TIME with the up/down movement buttons and enter the current time with numeric buttons. Select the ON TIME and OFF TIME for television in the same manner and[...]

23 Note 2: Since the external sources such as satellite receivers focus on single channel and transmit it to the TV although they can receive many channels, other channels that are received by similar devices can not be displayed on the POP screen. Note 3: HDMI2 can not be selected in the PIP screen when HDMI1 is displayed on the main screen. Note [...]

24 8 Teletext means in short the transmission of various updated information along with the TV broadcast signal in the form of text and graphics. To be able to receive a quality teletext broadcast, a good aerial system and a broadcast signal that is not weak, with no reflections and interference from other channels are required. Even in a very clea[...]

25 8.7-Temporary TV Picture (UPDATE) This button allows you to switch to the television picture while the page you want is being searched in the teletext broadcast eliminating the need to wait during the search. You may switch to the television picture by pressing the ( ) button while Teletext is searching for your desired page. Once the page you w[...]

26 9 You can connect various compatible audio and video devices to your television. AV inputs: Press the AV button on your remote control. The Source menu, where you can select the access mode will be displayed. Here, you can select whichever input you would like. ANALOGUE TV: While in the AV or Digital TV modes, move onto this option and press OK [...]

27 R L VIDEO HDMI input 9.1-Connection types for external devices VCR/VCD DVD/PVR DECODER CAMCORDER VIDEO GAME SCART SOCKET Note 1: In HDMI mode; some resolutions are supported when a DVI to HDMI converter cable from a PC is used. Note 2: In some graphic cards, when a connection is made between the TV and PC with a DVI to HDMI cable, the led will c[...]

28 9.2.3-PC Setting Enter into the SETUP menu from the Main Menu by pressing the MENU button in the PC mode. In order to make the necessary settings in this menu, you can use the right- left , up-down movement buttons on your remote control. You can make the following settings for your monitor in this menu. 9.2.4-HORIZONTAL POSITION: Horizontal pos[...]

29 10 Failure Possible cause Solution The television does not function Is the mains lead connected to the mains supply and the TV? Check the mains lead Is the main power socket switched on? Check if the On/Off switch is on. Poor picture quality Is the aerial cable attached? Check the aerial cable. If you are using a satellite dish, is it well adjus[...]

30 11 SCREEN SIZE 40” Panel type 40”, 16:9 Active matrix TFT Sound output 2 x 10 W Power consumption 240 W Stand by power value <2.5 W Teletext page 250 Loudspeaker impedance: 16 Ohm Scart 1 STD Scart 2 STD Audio/Video PHONO (Input) STD S-Video socket STD YUV (Video/Sound) Component Input STD HDMI 1 STD HDMI 2 STD VGA Input STD PC Audio Inpu[...]

31 12 MAIN UK TRANSMITTER STATIONS UHF CHANNELS STATIONS CT D Regional Main stations BBCI BBC2 ITV CH4 CH5 Map BBCI BBC2 ITV CH4 CH5 Map North West Caldbeck 30 34 28 32 56 12 Bluebell Hill 40 46 43 65 29 Winter Hill 55 62 59 65 48 15 Crystal Palace 26 33 23 30 37 28 Douglas (IOM) 68 66 48 56 56 45 Dover 50 56 66 53 30 North Oxford 49 52 64 67 31 Be[...]

32 13 Guarantee - Television Plc Your new television is guaranteed against the cost of breakdown repairs for twelve months from the date of the original purchase. What is covered? • All repairs necessary as a result of faulty materials,defective components or manufacturing detect. • The cost of all functional replacement parts,excluding remote [...]

33 13 HOW TO OBTAIN SERVICE Plc Congratulations on your choice of a Beko colour television.Your new television has been designed and manufactured to the highest quality stadards to give you many years of use.To get the best out of it,please take a few moments to read the instruction book. Your television is supplied with a full 12 months guarantee,[...]

F AZ.80 1 -0 1[...]