Beko DCU 8330 GX manuale d’uso

Dr yer DCU 833 0 GX[...]

Read this manual prior to initial operation of the product! Dear Customer , We hope that your pr oduct, which has been manufactur ed in modern facilities and passed through a strict quality contr ol pr ocedure, will give you very good r esults. We advise you to r ead thr ough this manual carefully befor e using your pr oduct and keep it for future [...]

3 EN Important safety information This section includes safety information that will help protection fr om risks of personal injuries or materialistic damages. Failure to follow these instructions shall cause any warranty and reliability commitment to become void. General safety • Never place the machine on a carpet- covered floor , otherwise, la[...]

4 EN with extra detergent - this will reduce, but not eliminate, the hazard. • This product must be gr ounded. Grounding installation decr eases the risk of electric shock by opening a path with low resistance for the electricity flow in case of a malfunction or failure. Power cable of this product is equipped with a conductor and a grounding plu[...]

5 EN Children ’ s safety • Electrical appliances are danger ous for the children. Keep childr en away fr om the machine when it is operating. Do not let them tamper with the machine. • Packaging materials are danger ous to children. Keep the packaging materials out of reach of childr en or dispose them by classifying according to waste direct[...]

6 EN 2 Inst allation Refer to the nearest Authorised Service Agent for installation of your product. C Preparation of location and electrical installation for the product is under customer’ s r esponsibility . B Installation and electrical connections must be carried out by a qualified personnel. A Prior to installation, visually check if the pro[...]

7 EN C Never unscrew the adjustable feet fr om their housings. Electrical connection Connect the machine to a grounded outlet protected by a fuse of suitable capacity as stated in the technical specifications table. Our company shall not be liable for any damages that will arise when the machine is used on a circuit without gr ounding. • Connecti[...]

8 EN T ranspor tation of the mac hine 1. Unplug the machine from the mains. 2. Remove the water drain (if any) and chimney connections. 3. Drain water remained in the machine completely before transportation. Disposing of the old mac hine Dispose of your old machine in an environmentally friendly manner . Refer to your local dealer or solid waste c[...]

9 EN programme. A B C l m n o p q D Low Laundr y unsuitable for dr ying in the mac hine • Laundry items with metal attachments such as belt buckles and metal buttons can damage your dryer . • Do not dry items such as woollens, silk garments and nylon stockings, delicate embroider ed fabrics, laundry with metal accessories and items such as slee[...]

10 EN not be dried in the product since they emit flammable or explosive vapor . • Do not dry items cleaned with industrial chemicals in the dryer . • Do not dry your unwashed laundry in the dryer . • Items soiled with cooking oils, acetone, alcohol, fuel oil, kerosene, stain r emover , turpentine, paraffin and paraf fin r emovers must be was[...]

11 EN Following weights are given as examples. Home articles Approximate weights (g) Cotton quit covers (double) 1500 Cotton quit covers (single) 1000 Bed sheets (double) 500 Bed sheets (single) 350 Large tablecloths 700 Small tablecloths 250 T ea napkins 100 Bath towels 700 Hand towels 350 Garments Approximate weights (g) Blouses 150 Cotton shirts[...]

12 EN 4 Selecting a Pr ogramme and Operating Y our Mac hine 1 . W ashing mac hine spin speed*/ T imer pro- gramme selection Spin speed used to spin the laundry in the washing macthine / Indicates the time for timer programs. 2. Display Indicates the status of the machine. 3. Star t/P ause/Cancel button Used to start, pause or cancel the programme. [...]

13 EN Preparing the machine 1. Plug in your machine. 2. Place the laundry in the machine. 3. Press the “On/Of f” button. C Pr essing the “On/Of f” button does not necessarily mean that the programme has started. Press “Start/Pause/ Cancel” button of the machine to start the programme. Programme selection Decide the appropriate pr ogramm[...]

14 EN •Shir t This programme dries the shirts mor e sensitively and creases them less and thus, helps to iron them mor e easily . C Ther e may be a little humidity on your shirts at the end of the programme. W e recommend you not to leave the shirts in the dryer . •Jeans Y ou can use this programme to dry your jeans that you have spun at high s[...]

15 EN Programme selection and consumption table Programme table * : Energy Label standard pr ogram (AS/NZS 2442) All values given in the table have been fixed according to standar d laboratory conditions. These values may deviate from the table accor ding to the laundry type, laundry spin speed, environmental conditions and voltage fluctuations. EN[...]

16 EN Auxiliar y function Audio W arning Cancel audio warning Audio warning level 1 Audio warning level 2 Audio warning level 3 Y our dryer will give an audio warning when the programme comes to an end. If you do not want to hear this buzzing or want to change the volume level, you need to press the “V olume level” button. No audio warning will[...]

17 EN intervals to remind that the condenser needs cleaning. Door open Dryer door open symbol lights up. Time delay With the “T ime delay” function you can delay the programme start up to 24 hours. 1. Open the loading door and put the laundry in. 2. Set the drying programme and spin speed, and if requir ed, select the auxiliary functions. 3. Pr[...]

18 EN C Anti-cr easing icon will light up at the end of the programme if anti-cr easing function is active. Changing the programme after the programme has star ted Y ou can us e t hi s f eat ur e to dr y y our la und ry in a dif fere nt pr og ra m a fte r y our m ach ine ha s s ta rte d to run . For example; Press and hold the “Start/Pause/Cancel[...]

19 EN Ending the programme thr ough canceling A new program can be selected and started after “Program cancel” is activated in order to change the drying pr ogram. T o cancel any selected programme: Press “Start/Pause/Cancel” button for about 3 seconds. “Lint filter cleaning” and “W ater tank” warning symbols light up and “End” [...]

20 EN Sensor There ar e humidity sensors in your dryer that detect whether the laundry is dry or not. T o clean the sensor: 1. Open the loading door of the dryer . 2. Allow the machine to cool down if drying has been carried out. 3. Wipe the metal sensors with a soft cloth, dampened with vinegar and dry them. C Clean metal sensors 4 times a year . [...]

21 EN W ater tank; The moisture in the damp laundry is taken from the laundry and condens ed. Drain the water tank after each drying cycle or during drying when “W ater tank” warning light turns on. A Condensed water is not drinkable! A Never take out the water tank when the programme is running! If you forget to drain the water tank, your drye[...]

22 EN 5. Place the condenser in its housing. Fasten the 2 locks and make sure that they are seated secur ely . 6. Close the kick plate cover .[...]

23 EN 6 Suggested solutions f or pr oblems Drying process takes too much time • Meshes of the filter may be clogged. W ash with water . Laundry comes out wet at the end of drying. • Meshes of the filter may be clogged. W ash with water . • Excessive laundry might have been loaded in. Do not load the dryer in excess. Dryer does not switch on o[...]

24 EN “Condenser cleaning” symbol is on. • Filter drawer/Condenser might have not been cleaned. Clean the filters in the condenser/filter drawer under the kick plate. A Call an authorised service if the problem persists.[...]