Belling CH70TX manuale d’uso

P art No 082757203 Date 11.07 .2012 Belling 60 - 70 - 90cm Hob T ouch UK Users Guide & Installation Handbook[...]

CONTENTS & INTRODUCTION CONTENTS • SAFET Y • USING THE PRODUCT • CLEANING • INST ALLA TION INSTRUCTIONS • TECHNICAL DA T A • CUST OMER CARE INTRODUCTION Thank you for buying this British- built appliance from us. This guide book is designed to help you through each step of owning your new appliance, from installation to use. Please [...]

SAFETY WARNING! - This appliance and its accessible parts may become hot during use. T o av oid burns, children less than 8 years of age shall be kept aw ay unless continuously supervised. This appliance can be used by children aged from 8 years and abo ve and persons with re- duced physical, sensory or mental capabilities or lack of experience and[...]

SAFETY General Servicing should be carried out only by authorised personnel. Do not spra y aerosols in the vicinity of this appliance while it is in operation. Do not store or use fl ammable liquids or items in the vicinity of this appliance. Do not modify this appliance. • Always ensure that pan bases are dry , stable and fl at before using th[...]

SAFETY Avoiding damage to the appliance. The ceramic glass of the hob can be damaged by objects falling onto it. Be especially careful with heavy jars of f ood being stored in cupboards above the hob , we recommend storing them away from the hob area. The edge of the glass can be damaged by being knocked by cookware. Cookware made of cast iron, cas[...]

USING THE HOB - ELECTRIC (CERAMIC) Touch Controls The touch controls of your hob hav e been designed to provide you with fi nger tip control of your hob , providing accur ate and repeatable power settings for cooking and an easy clean surface that can be easily wiped over , When a cook zone is activated the power set ting is displayed for each zon[...]

Appyling Power To The Hob Before switching on the power supply to the appliance, switch off any bright lights (Such as a cooker hood) and ensure the appliance is not in direct sunlight. This is to enable the electronic controls to calibrate its sensitivit y against the natur al ambient lighting (Approx 30 seconds). F ailure to observe the above wil[...]

USING THE HOB - ELECTRIC (CERAMIC) To operate the dual cook zone • Select the appropriate cook zone and set the power level as per the single zone • Whilst the heater display is still fl ash- ing press the central dual zone k ey , a red LED will illuminate next to the cook zone to indicate it has been activated. • The power level of the cook[...]

USING THE HOB - ELECTRIC (CERAMIC) Timer (All Cook Zones) All 4 cooking zones can be operated under the timer independently and at the same time for up to 99 minutes. When the set time expires the timer will beep and the cook zone will switch off automatically . To Set The Timer To A Cook Zone 1, Set the desired power level to the cook zone. 2, Whi[...]

ERROR CODES Hob Status Codes Fault Descripti on Act ion H Residual Heater No Fault " H" will sw itch off when glass surface drops below 60 o C Appl iance Errors & Alarms Fault Description A ction F0 Touch Control Error Switch t he power off and on, The syst em will reset and the hob should now be w orking correctly FA Touch Control Er[...]

CLEANING ELECTRIC HOB Ceramic glass hobs • It is recommended that you clean and wash the hob surf ace before using for the fi rst time. Apply a thin coat of ceramic hob cleaner to the hob to help maintain and protect it. • The ceramic hob top can be cleaned using a clean, damp cloth or kitchen paper . Do not use a used dishcloth or sponge as t[...]

INSTALLATION between hob base and appliance must be maintained. Installation above an oven Ref er to the manufacturer’ s instructions for clear ances above the o ven. W e recommend a 25mm gap between the bottom of the hob and appliance. Installation above a unit with a drawer or door The base of the appliance must be pro- tected from damage e.g. [...]

INSTALLATION Clearances and dimension – require- ments No shelf or overhang of combustible material should be closer than 650mm above the hob . There must be a minimum clearance of 50mm between the edges of the hob and any side walls; this clear ance must be maintained up to 420mm above the worktop. There must be a minimum clearance of 50mm betwe[...]

INSTALLATION Fitting into worktop Cut a hole in the work surface to the required size. The worktop must be of heat-resistant material or co vered with heat-resistant material. Protecting the cut-out; The types of chipboard used for work surfaces swell relativ ely quickly in contact with humidity . Apply a suitable sealant to the cut edge to protect[...]

INSTALLATION Installation Bracket Advice Secure the hob to the worktop by means of the brack ets provided, taking the thick - ness of the worktop into account. INST ALLA TION POSITIONS INST ALLA TION POSITIONS UNDERSIDE OF HOB Depending on your appliance it will be supplied with one of the following installation packs; Installation pack 1 4 x “U?[...]

INSTALLATION CONNECT TO THE ELECTRICITY SUPPLY WARNING: This appliance must be earthed. Only connect to the electrical mains terminal with the power switched off . The electrical mains terminal is live. F ollow the terminal block connection schematic Loose and inappropriate connections can make the terminal ov erheat. Ensure the cable clamp is fi [...]

TECHNICAL DATA SUPPLY: 220 -240V ~ 50Hz 5.04kW - 6.4kW Ref er to the data badge on the under side of your hob for speci fi c power rating of your model[...]

CUSTOMER CARE CUSTOMER CARE WEB SHOP Having purchased a superior cooker , hob or hood from us, you’ll naturally want to keep it looking great. And who better to help you care for it than the manuf ac- turer? W e offer an extensive r ange of accesso- ries, components and cleaning products which, will instantly give your cook er a good as new look.[...]

Please keep this handbook for f uture reference, or f or anyone else who may use the appliance.[...]

CUSTOMER CARE T o contact Belling about your appliance, please call Warranty Registration 0844 481 0182 to register your appliance Customer Care Helpline 0844 815 3746 in case of dif fi culty within the UK Alternatively gener al, spares and service information is av ailable from our website at www.belling.co.uk Please ensure that you hav e the pro[...]