Billion Electric Company 8501 manuale d’uso

BiP AC 8500/8501/8520 SHDSL VPN Firewall Bridge/ Router User ’ s Manual V ersion Release 5.07 Last Revision Date: 09-04-2006[...]

T T a a b b l l e e o o f f C C o o n n t t e e n n t t s s CHAPTER 1: INTRODUCTION .............................................................................................................. 3 I NTRODUCTION TO YOUR R OUTER ............................................................................................................. 3 F EA TURES [...]

DNS ................................................................................................................................................ 47 SHDSL – BiP AC 8500 ................................................................................................................... 48 SHDSL – BiP AC 8520 ...................................[...]

SHDSL VPN Fire w all Bridge/Router Chapter 1: Introduction Chapter 1: Introduction Introduction to your Router Welcome to the Billion BiP AC 8500/8501/8520 SHDSL Router . Y our Billion SHDSL router is an “all-in-one” unit, combining an SHDSL modem, SHDSL router and Ethernet network switch, providing everything you need to get the machines on yo[...]

SHDSL VPN Fire w all Bridge/Router Chapter 1: Introduction Domain Name System (DNS) relay It provides an easy way to map the domain name (a friendly name for users such as www .yahoo.com) and IP address. When a local machine set s its DNS server with this router ’s IP address, every DNS conversion request packet from t he PC to this router will b[...]

SHDSL VPN Fire w all Bridge/Router Chapter 1: Introduction Firmware Upgradeable Device can be upgraded to the late st firmware through the WEB based GUI. Rich Management Interfaces It supports flexible management interfaces with local console port, LAN port, and W AN port. Users can use terminal applications through the con sole port to configure a[...]

SHDSL VPN Fire w all Bridge/Router Chapter 2: Installing the Router Chapter 2: Inst alling the Router Import ant note for using this router Wa r n i n g  Do not use this router in high humidity or high temperatures.  Do not use the same power source for this router as othe r equipment.  Do not open or repair the case yourself. If this rout[...]

SHDSL VPN Fire w all Bridge/Router The Front LEDs of BiP AC 8500 7 2 4 1 3 LED Meaning 1 LINE Lit when successfully connected to SHDSL line and it is synchronized. 2 LAN Port 1X — 4X (RJ-45 connector) Lit when connected to an Ethernet device. Green for 100Mbps; Orange for 10Mbps. Blinking when data is Transmitted / Received. 3 SYS Lit when the sy[...]

SHDSL VPN Fire w all Bridge/Router 8 The Front LEDs of BiP AC 8520 3 5 2 1 4 LED Meaning 1 2 LINE 1 & 2 Lit when successfully connected to SHDSL line and it is synchronized. 3 LAN Port 1X — 4X (RJ-45 connector) Lit when connected to an Ethernet device. Green for 100Mbps; Orange for 10Mbps. Blinking when data is Transmitted / Received. 4 SYS L[...]

SHDSL VPN Fire w all Bridge/Router 9 The Front LEDs of BiP AC 8501 3 1 2 4 LED Meaning 1 PWR Lit when power is ON. 2 SYS Lit when the system is ready . 3 LAN Port 1X — 4X (RJ-45 connector) Lit when connected to an Ethernet device. Green for 100Mbps; Orange for 10Mbps. Blinking when data is Transmitted / Received. 4 LINE Lit when successfully conn[...]

SHDSL VPN Fire w all Bridge/Router 10 The Rear Port s of BiP AC 8500 / 8520 4 1 3 *6 2 5 Port Meaning 1 Power Switch Power ON/OFF switch 2 PWR Connect the supplied power adapter to this jack. 3 RESET T o be sure the device is being turned on  press RESET button for: 1-3 seconds : quick reset the device. 6 seconds above, and power off, power on t[...]

SHDSL VPN Fire w all Bridge/Router 11 The Rear Port s of BiP AC 8501 5 1 3 6 2 4 Port Meaning 1 Power Switch Power ON/OFF switch 2 PWR Connect the supplied power adapter to this jack. 3 RESET T o be sure the device is being turned on  press RESET button for: 1-3 seconds : quick reset the device. 6 seconds above, and power off, power on the devic[...]

SHDSL VPN Fire w all Bridge/Router Chapter 3: Basic Installation 12 Chapter 3: Basic Inst allation The router can be configured with your web browser . A web b rowser is included as a standard application in the following operating systems: Linux, Mac OS, Windows 98/NT/2000/X P/ Me, etc. The product provides an easy and user-friendly interface for [...]

SHDSL VPN Fire w all Bridge/Router Chapter 3: Basic Installation 13 Configuring PCs in Windows in Window XP 1. Go to St art / Control Panel (in Classic V iew). In the Control Panel, double-click Network Connections . 2. Double-click Local Area Connection . (See Figure 3.1) 3. In the LAN Area Connection S tatus window , click Properties . ( See Figu[...]

SHDSL VPN Fire w all Bridge/Router Chapter 3: Basic Installation 14 Configuring PCs in Windows 2000 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click Network and Dial-up Connections . 2. Double-click Local Area (“LAN”) Connection . (See Figure 3.5) 3. In the LAN Area Connection S tatus window , click Properties . ([...]

SHDSL VPN Fire w all Bridge/Router Chapter 3: Basic Installation 15 Configuring PC in Windows 95/98/ME 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click Network and choose the Configuration tab. 2. Select TCP / IP -> NE2000 Comp atible , or the name of any Network Interface Card (NIC) in your PC. ( See Figure 3.9) 3[...]

SHDSL VPN Fire w all Bridge/Router Chapter 3: Basic Installation 16 Configuring PC in Windows NT4.0 1. Go to St art / Settings / Control Panel . In the Control Panel, double-click Network and choose the Protocols tab. 2. Select TCP/IP Protocol and click Properties . ( See Figure 3.12) 3. Select the Obt ain an IP address from a DHCP server radio but[...]

SHDSL VPN Fire w all Bridge/Router Chapter 3: Basic Installation 17 Factory Default Settings Before configuring your , you need to know the following default settings. Web Interface (Username and Password) Username: admin Password: admin The default username and password are “ admin ” and “ admin ” respectiv ely . A ttention A ttention If y[...]

SHDSL VPN Fire w all Bridge/Router Chapter 3: Basic Inst allation 18 Information from your ISP Before configuring this device, you have to check wi th your ISP (Internet Service Provider) to find out what kind of service is provided such as DHCP (Obt ain an IP Address Automatically , S tatic IP (Fixed IP Address) and PPPoE. Gather the information a[...]

SHDSL VPN Fire w all Bridge/Router Chapter 3: Basic Installation 19 Configuring with your W eb Browser Open your web browser , enter the IP address of your router , which by default is 192.168.1.254 , and click “ Go ”, a user name and password window prompt will appear . The default username and password are “admin” and “admin” respecti[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Chapter 4: Configuration At the configuration homepage, the lef t navigati on pane where bookmarks are provided links you directly to the desired setup page, includin g: St atus - ARP T able - Routing T able - DHCP T able - PPTP S tatus - IPSec S t atus - L2TP S tatus - Email S t atus - Ev[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration S tatus ARP T able This section displays the router’s ARP (Address Resolution Protocol) T able, which shows the mapping of Internet (IP) addresses to Ethernet (MAC) addresses. This is useful as a quick way of determining the MAC address of the network interface of your PCs to use with th[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration DHCP T able Leased: The DHCP assigned IP addresses information. IP Address: A list of IP addresses of devices on your LAN (Local Area Network). Expired: The expired IP addresses information. Permanent: The fixed host mapping information Leased T able IP Address: The IP address that assigne[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Name: The name you assigned to the p articular PPTP connection in your VPN configuration. T ype: The type of connection (dial-in/dial-out). Enable: Whether the connection is currently enabled. Active: Whether the connection is currently active. T unnel Connected: Whether the VPN T unnel is[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration L2TP St atus This shows details of your configure d L2TP VPN Connections. Name: The name you assigned to the p articular L2TP connection in your VPN configuration. T ype: The type of connection (dial-in/dial-out). Enable: Whether the connection is currently enabled. Active: Whether the con[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Event Log This page displays the router’s Event Log entries. Major events are logged to this window , such as when the router ’s SHDSL connection is disconnected, as well as Firewall event s when you have enabled Intrusion or Blocking Logging in the Configuration – Firewall section o[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration NA T Sessions This section lists all curr ent NA T sessions between inte rface of types external (W AN) and internal (LAN). Diagnostic It tests the connection to computer(s) which is connected to LAN ports and also the W AN Internet connection. If PING www.google.com is shown F AIL and the[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration UPnP Portmap The section lists all por t-mapping established using UPnP (Universal Plug and Play). Please see the Advanced section of this manual for more details on UPnP and the router ’s UPnP configuration options. 27[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Quick S tart For detailed instruction s on configuring your WAN settings, p lease see the WA N section of this manual. Usually , the only details you will need for the Quick S tart wizard to get you online are your login (of ten in the form of username@ispname ), your p assword and the enc[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Select the desired option from the list and click Apply to return to the Quick S t art interface to continue configuring your ISP connection. Please note that the content s of this list will vary , d epending on what is supported by your ISP . 29[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Configuration When you click this item, you get following sub-items to configure your router . LAN, W AN, System, Firewall, VPN, QoS, V irtu al Server , T ime Schedule and Advanced These functions are described below in the following sections. LAN (Local Area Netw ork) Here are the items w[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Ethernet Primary IP Address IP Address: The default IP on this router . SubNetmask: The default subnet mask on this router . RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP function. 31[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration IP Alias This function support s to create multiple virtual IP interfaces on this router . It help s to connect two or more local networks to the ISP or remote node. In this case, an internal router is not required. IP Address: S pecify an IP address on this virtual interface. SubNetmask: [...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Ethernet Client Filter The Ethernet Client Filter supports u p to 16 Ethernet network machines that helps you to manage your network control to accept traf fic from specific authorized machines or can restrict unwanted machine(s) to access your LAN. There are no pre-define Ethernet MAC add[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Active PC in LAN displays a list of individual Ethernet device’ s IP Address & MAC Address which connecting to the router . Y ou can easily by checking the box next to the IP address to be blocked or allowed. Then, Add to insert to the Ethernet Client Filter table. The maximum Ethern[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Port Settin g This section allows you to configure the settings for the r outer ’ s Ethernet port s to solve some of the compatibility problems that may be encountered while connecting to the I nternet, as well allowing users to tweak the performance of their network. Port # Connection T[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration DHCP Server Y ou can disable or enable the DHCP (Dynamic Host C onfiguration Protocol) server or enable the router ’s DHCP relay functions. The DHCP protocol allows your router to dynamically assign IP addresses to PCs on your network if they are configured to obt ain IP addresses automa[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration W AN - Wide Area Network W AN refers to your Wide Area Ne twork connection, i.e. your router ’s connection to your ISP and the Internet. Here are the items within the W AN section: ISP , DNS and SHDSL . ISP The factory default is PPPoE. If your ISP uses this access protocol, click Edit t[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration RFC 1483 Routed Connections Description: User-definable name for the connection. VPI and VCI: Enter the information provided by your ISP . A TM Class: The Quality of Service for A TM layer . NA T: The NA T (Network Address T ranslation) feature allows multiple users to a ccess the Internet[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration RFC 1483 Bridged Connections Description: User-definable name for the connection. VPI and VCI: Enter the information provided by your ISP . A TM Class: The Quality of Service for A TM layer . Encap sulation method: Select the encapsulation format, this is provided by your ISP . Accept able[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration PPPoA Routed Connections Description: User-definable name for the connection. VPI/VCI: Enter the information provided by your ISP . A TM Class: The Quality of Service for A TM layer . NA T: The NA T (Network Address T ranslation) feature allows multiple users to a ccess the Internet throug[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration predetermined period of time.  Det ail: Y ou can define the destination port and packet type (TCP/UDP) without checking by timer . It allows you to set which outgoing traf fic will not trigger and reset the idle timer . RIP: RIP v1, RIP v2, and RIP v2 Multicast. Check to enable RIP func[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration IPoA Routed Connections Description: User-definable name for the connection. VPI/VCI: Enter the information provided by your ISP . A TM Class: The Quality of Service for A TM layer . NA T: The NA T (Network Address T ranslation) feature allows multiple users to a ccess the Internet through[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration PPPoE Connections Description: User-definable name for this connection. VPI/VCI: Enter the information provided by your ISP . A TM Class: The Quality of Service for A TM layer . NA T: The NA T (Network Address T ranslation) feature allows multiple users to a ccess the Internet through a si[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration  Connect on Demand: If you want to establish a PPPoE session only when there is a packet requesting access to the Internet (i.e. when a program on your computer attempt s to access the Internet). Idle Timeout: Auto-disconnect the broadband firewall gateway when there is no activity on t[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration PPPoE with Pass-through Connections PPPoE with pass-through adapt s the following method: PPPoE Routed mode + 1483 Bridge Mode. With pure PPPoE connection, the router can get one W AN address to the router . With the PPPoE and PPPoE pass-through, concurrently , it allows user to have a W A[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Authentication Protocol: Default is Chap(Auto). Y our ISP will advise you whether to use Chap or Pap. Connection:  Always on: If you want the router to establish a PPPoE session when starting up and to automatically re-establish the PPPoE session w hen disconnected by the ISP .  Conn[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration DNS A Domain Name System (DNS) contains a mapping t able for domain name and IP addresses. On the Internet, every host has a unique and user-friendly name (domain name) such as www .helloworld.com and an IP address. An IP address is a 32-bit number in the form of xxx.xxx.xx x.xxx , for exa[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration SHDSL – BiP AC 8500 Mode: The SHDSL device can function as a CPE (Customer Premises Equipment) or CO (Central Office). Select CPE mode when the BiP AC 8500 is connecting to your ISP . Back – to –back: it is a direct conn ection between two SHDSL devices which one is set to CPE and th[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration SHDSL – BiP AC 8520 4-wired Mode 2-wired Mode 4-Wired Connection: BiP AC 8520 supports either 2-wire and 4-wires SHDSL connection. Activate the device to 4-wired by enabling the function; otherwise , disable it to be used as 2-wire mode connection. Note: When select 2- w ired mode , only[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration SHDSL – BiP AC 8501 Mode : The SHDSL device can function as a CPE (Customer Premises Equipment) or CO. Select CPE mode when the BiPAC 8501 is connecting to your ISP. Annex T ype: It is the DSL operating mode standard. Select Annex A or Annex B to support up to 5.7Mbps SHDSL.bis function.[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration System Here are items within the System section: Time Zone, Remote Access, Firmware Upgrade, Backup/Restore, Restart and User Management. Time Zone The router does not have a real time clock on board; instead, it uses the Simple Network T ime Protocol (SNTP) to get the current time from an[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Remote Access T o temporarily permit remote admini stration of the rout er (i.e. from out side your LAN), select a time period the router will permit remote access for and click Enable. Y ou ma y change other configuration options for the web administration interface using Device Managemen[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Firmware Upgrade Y our router ’s “firmware” is t he softw are that allows it to operate and provides all it s functionality . Think of your router as a dedicated computer , and the firmware as the sof tware it runs. Over time this software may be improved and modified, and your route[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Backup / Restore These functions allow you to save and backup your router ’s current se ttings to a file on your PC, or to restore a previously saved backup. This is u seful if you wish to experiment with dif ferent settings, knowing that you have a backup handy in the case of any mist a[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Rest art Ro uter Click Resta rt with option Current Settings to reboot your router (and restore your last saved configuration). If you wish to restart the router using the factory default settings (for example, af ter a firmware upgrade or if you have saved an incorrect configuration), sel[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration User Management In order to prevent unauthorized access to your router ’s configuration interface, it requires all users to login with a password. Y ou can set up multiple user account s, each with their own password. Y ou are able to Edit existing users and Create new users who are able[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Firewall and Access Control Y our router includes a full SPI (S t ateful Packet Inspection) firewall for controlling Internet access from your LAN, as well as helping to prevent att acks from hackers. In addition to this, when using NA T , the router acts as a “natural” Internet firewa[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration General Settings Y ou can choose not to enable Firew all, you will not able to add filter rules by yourself in the Packet Filter , or enable the Firewall using preset filter rules an d modify the packet filter rules as required. The Packet Filter is used to filter p ackets based-on Applica[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Packet Filter This function is only available when the Firewall is enabled and one of th ese four security levels is chosen (All blocked, High, Medium and Low). The predefined port filter rules in the Packet Filter must modify accordingly to the level of Firewall, which is selected. See T [...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Example: Predefined Port Filters Rules The predefined port filter rules for High, Medium and Low security levels are listed. See T able 1. Note: Firewall – All Blocked/User-defin ed, you must define and create the port filter rules yourself. No predefined rule is being pre c onfigured. T[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration 61 MSN (7001) UDP(17) 7001 7001 YES YES N/A N/A N/A N/A MSN VEDIO (9000) TCP(6) 9000 9000 NO YES N/A N/A N/A N/A Inbound: Internet to LAN ; Outbound: LAN to Internet. YES: Allowed ; NO: Blocked ; N/A: Not Applicable[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Packet Filter – Add TCP/UDP Filte r Rule Name: Users-define description to iden tify this entry or click to select existing predefined rules. The maximum name length is 32 characters. Time Schedule: It is self-defined time period. Y ou ma y specify a time schedule for your prioritization[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Packet Filter – Add Raw IP Filter Rule Name: Users-define description to iden tify this entry or click to select existing predefined rules. Time Schedule: It is self-defined time period. Y ou may specify a time schedule for your prioritization policy . For setup and detail, refer to T im[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Example: Configuring your firewall to al low for a publicly accessible web server on your LAN The predefined port filter rule for HTTP (TCP port 80) is the same no matter whether the firewall is set to a high, medium or low security level. T o setup a web server lo cated on the local netwo[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Configuring Packet Filter: 1. Click Port Filters . Y ou will then be presented with the predefined port filter rules screen (in thi s case for the low security level), shown below: Note: Y ou may click Edit the predefined rule instead of Dele te it. This is an example to show to how you ad[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration 5. The new port filter rule for HTTP is shown below: 6. Configure your Virtual Server (“port forwarding”) settings so that incomin g HTTP requests on port 80 will be forwarded to the PC running your web server: Note: For how to configure the HT TP in Virtual Server, go to Add Virtual S[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Intrusion Detection The router ’s Intrusion Detection System (IDS) is used to detect hacker attacks and intrusion attem pts from the Internet. If the IDS function of the firewall is enabled, inbound packet s are filtered and blocked depending on whether they are detected as possible h ac[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration T able 2: Hacker att ack types recognized by the IDS Intrusion Name Detect Parameter Blacklist T ype of Block Duration Drop Packet Show Log Ascend Kill Ascend Kill data Src IP DoS Y es Y es WinNuke TCP Port 135, 137~139, Flag: URG Src IP DoS Y es Y es Smurf ICMP type 8 Des IP is br oadcast[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration URL Filter URL (Uniform Resource Locator – e.g. an address in the form of http://www .abcde.com or http://www .example.com ) filter rules allow you to prevent users on your network from accessing p articular websites by their URL. There are no pre-define d URL filter rules; you can add f[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration 3. If the packet does not match either of the abov e two items, it is sent to the remote web server . 4. Please be note that the completed URL, “www” + domain name, shall be specified. For example to block traffic to www .google.com.au , enter “ www .google ” or “ www .google.com[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration IM / P2P Blocking IM, short for Instant Message, is required to use client program software that allows users to communicate, in exchanging text message, with other IM users in re al time over the Internet. A P2P application, known as Peer-to-peer , is group of computer users who share fil[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Firewall Log Firewall Log display log information of any unexpected action with your firewall settings. Check the Enable box to activate the logs. Log information can be seen in the St atus – Event Log after enabling. 72[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration VPN - V irtual Private Networks Virtual Private Networks is ways to e stablish secured communication tunnels to an organization’ s network via the Internet. Y our router supports three main types of VPN (V irtual Private Network), PPTP , IPSec and L2TP . PPTP (Point-to-Point T unneling P[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration PPTP Connection - Remote Access Connection Name: User-defined name for the connection (e.g. “connection to of fice”). T ype: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server , e.g. your office server), check Dial In operates as a VPN serv[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Example: Configuring a Remote Access PPTP VPN Dial-out Connection A comp any’s office esta blishes a PPTP VPN connection with a file server located at a sep arate location. The router is installed in the office, connected to a couple of PCs and Servers. Dial-out 75[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Configuring the PPTP VPN in the Office Y ou can either input the IP address (69.1.121.33 in this case) or hostname to reach the server . 1 2 3 4 5 Item Function Description 1 Connection Name VPN_PPTP Given name of PPTP connection Dial out Check Dial out 2 Server IP Address (or Hostname) 69[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration PPTP Connection - LAN to LAN Connection Name: User-define description of the connection. T ype: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server , e.g. your office server), check Dial In operates as a VPN server .  When configuring your ro[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Example: Configuring a PPTP LAN-to-LAN VPN Connection The branch office e stablishes a PPTP VPN tunnel with head of fice to connect two private networks over the Internet. The routers are inst alled in the head office and branch office accordingly . Atte n t i o n Both office LAN networks [...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Configuring PPTP VPN in the Head Office The IP address 192.168 .1.201 will be assigned to the router located in the branch of fice. Please make sure this IP is not used in the head office LAN. 1 2 3 4 5 6 Item Function Description 1 Connection Name HeadOffice Given a name of PPTP connectio[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Configuring PPTP VPN in the Branch Office The IP address 69.1.12 1.30 is the Public IP address of the router located in head office. If you registered the DDNS (please refer to the DDNS section of this manual), you can also use the domain name instead of the IP ad dress to reach the router[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration IPSec (IP Security Protocol) Click Create to create a new IPSec VPN connection account. After you have created the IPSec connection, account information will be displayed. (See example above).  Enable / Disable: This function activates or deactivates the IPSec connection. T o wish inter[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration IPSec VPN Connection Connection Name: User-defined name for the connection (e.g. “connection to of fice”). Local Network: Set the IP address, subnet or address range of the local network.  Single Address: The IP address of t he local host.  Subnet: The subnet of the local network[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration  3DES: S tands for T riple Data Encryption S t andard, it uses 168 (56*3) bits as an encryption method.  AES: S tands for Advanced Encryption S tandards, you can use 128, 192 or 256 bits as encryption method. Perfect Forward Secrecy: Choose whether to enable PFS using Diffie-Hellman [...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Advanced Option This function is only available after completed creating an IPSec account. Click Advanced Option to change the following settings: IKE (Internet key Exchange) Mode: Select IKE mode to Main mode or Aggressive mode. This IKE provides secured key generation and key management.[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration encryption method. Diffie-Hellman Group: It is a public-key cryptography protocol that allows two parties to establish a shared secret over an unsecured communication channel (i.e. over the Internet). There are three modes, MODP 768-bit, MODP 1024-bit and MODP 1536-bit. MODP st ands for Mo[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Example: Configuring a IPSec LAN-to-LAN VPN Connection T able 3: Network Configur ation and Security Plan Branch Office Head Office Local Network ID 192.168.0.0/24 192.168.1.0/24 Local Router IP 69.1.121.30 69.1.121.3 Remote Network ID 192.168.1.0/24 192.168.0.0/24 Remote Router IP 69.1.12[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Configuring IPSec VPN in the Head Office 1 2 3 4 5 Item Function Description 1 Connection Name IPSec_HeadOf fice Given a name of IPSec connection Subnet Check Subnet radio button IP Address 192.168.1.0 2 Netmask 255.255.255.0 Head office network 3 Secure Gateway Address (or Hostname) 69.12[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Configuring IPSec VPN in the Branch Office 1 2 3 4 5 Item Function Description 1 Connection Name IPSec_Branch Office Given a name of IPSec connection Subnet Check Subnet radio button IP Address 192.168.0.0 2 Netmask 255.255.255.0 Branch of fice network 3 Secure Gateway Address (or Hostname[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Example: Configuring a IPSec Host-to-LAN VPN Connection 89[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Configuring IPSec VPN in the Office 1 2 Item Function Description 1 Connection Name IPSec Given a name of IPSec connection Subnet Check Subnet radio button IP Address 192.168.1.0 2 Netmask 255.255.255.0 Head office network 3 Secure Gateway Address (or Hostname) 69.121.1.30 IP address of th[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration L2TP (Layer T wo T unneling Protocol) T wo types of L2TP VPN are supported Remote Access and LAN-to-LAN (please refer below for more information.). Click Create to create a new VPN connection account. After you have created L2TP connection, account status will be displayed. (See example ab[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration L2TP Connection - Remote Access L2TP VPN Connection Connection Name: User-defined name for the connection (e.g. “connection to of fice”). T ype: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server , e.g. your office server), check Dial In op[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Click Apply af ter changing settings. L2TP over IPSec (L2TP/IPSec) VPN Connection IPSec: Enable for enhancing your L2TP VPN security . Authentication: Authentication establishes the integrity of the datagram and ensures it is not t ampered with in transmit. There are three options, Message[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Example: Configuring a L2TP VPN - Remote Access Dial-in Connection A remote worker establishes a L2TP VPN connection with the head office using Microsof t's VPN Adapter (included with Windows XP/2000/ME, etc.). The router is installed in the head of fice, connected to a couple of PCs [...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Configuring L2TP VPN in the Office The input IP address 192.168.1.200 will be assigned to the remote worker . Please make sure this IP is not used in the Office LAN. 1 2 5 3 4 6 Item Function Description 1 Connection Name VPN_L2TP Given a name of L2TP connection Dial in Check Dial in 2 Pri[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Example: Configuring a Remote Access L2TP VPN Dial-out Connection A comp any’s office esta blishes a L2TP VPN connection with a file server located at a sep arate location. The router is installed in the office, connected to a couple of PCs and Servers. Dial-out 96[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Configuring the L2TP VPN in the Office 1 2 3 5 4 6 Item Function Description 1 Connection Name VPN_L2TP Given name of L2TP connection Dial out Check Dial out 2 Server IP Address (or Hostname) 69.121.1.33 An Dialed server IP Username username 3 Password 123456 A given username & passwor[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Example: Configuring your Router to Dial-in to the Server Currently , Microsoft Windows operation system does not support L2TP incoming service. Additional sof tware ma y be required to set up your L2TP incoming service. 98[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration L2TP Connection - LAN to LAN L2TP VPN Connection Connection Name: User-define description of the connection. T ype: Check Dial Out if you want your router to operate as a client (connecting to a remote VPN server , e.g. your office server), check Dial In operates as a VPN server .  When[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Click Apply af ter changing settings. L2TP over IPSec (L2TP/IPSec) VPN Connection IPSec: Enable for enhancing your L2TP VPN security . Authentication: Authentication establishes the integrity of the datagram and ensures it is not t ampered with in transmit. There are three options, Message[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Example: Configurin g L2TP LAN-to-LAN VPN Connection The branch office e stablishes a L2TP VPN tunnel with head of fice to connect two private networks over the Internet. The routers are inst alled in the head office and branch office accordingly . A ttention Both office LA N networks MUST[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Configuring L2TP VPN in the Head Office The IP address 192.168 .1.200 will be assigned to the router located in the branch of fice. Please make sure this IP is not used in the head office LAN. 1 2 3 7 5 6 4 Item Function Description 1 Connection Name HeadOffice Given a na me of L2TP connec[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Configuring L2TP VPN in the Branch Office The IP address 69.1.12 1.30 is the Public IP address of the router located in head office. If you registered the DDNS (please refer to the DDNS section of this manual), you can also use the domain name instead of the IP ad dress to reach the router[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration QoS (Quality of Service) QoS function helps you to control your network traf fic for each application from LAN (Ethernet and/or Wireless) to W AN (Internet). It facilitates you to control the d ifferent quali ty and speed of through put for each application when the system is r unning with[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Destination IP address Range : The destination IP address or range of p ackets to be monitored. DSCP Marking : Differe ntiated Services Code Point (DSCP), it is the first 6 bits in the T oS byte. DSCP Marking allows users to assign spe cific application tr af fic to be executed in priority[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Outbound IP Throttling (LAN to W AN) IP Throttling allows you to limit the speed of IP traffic. The value entered will limit the speed of the application that you set to the specified value’ s multiple of 32kbps. Click Clear Y ou can click Clear to delete the existin g A pp lication. App[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Inbound IP Throttling (W AN to LAN) IP Throttling allows you to limit the speed of IP traffic. The value entered will limit the speed of the application that you set to the specified value’ s multiple of 32kbps. Click Clear Y ou can click Clear to delete the existin g A pp lication. Appl[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Example: QoS for your Network Connection Diagram Normal PCs Vo I P Restricted PC Information and Settings Upstream: 928 kbp s Downstream: 8 Mbps V oIP User : 192.168.1.1 Normal Use rs : 192.168.1.2~192.168.1.5 Restricted User: 192.168.1.100 0 100 200 300 400 500 kbps VoIP /VPN HI GH Othe r[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Mission-critical application Mostly the VPN connection is mission-critical application for doing data exchange between head and branch office. The mission-critical application must be sent out smoothly without any dropping. Set priority as high level for preventing any other applications t[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Sometime your customers or friends may upload their f iles to your FTP server and that will saturate your downstream bandwidth. The settings below help you to limit bandwidth for the restricted application. 11 0[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration V irtual Server (“Port Forwarding”) In TCP/IP and UDP networks a port is a 16-bit number used to identify which application program (usually a server) incoming connections should be delivered to. Some port s have numbers that are pre-assigned to them by the IANA (the Internet Assigned [...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Add Virtual Server Because NA T can act as a “natural” Internet firewall, yo ur router protects your network from being accessed by outside use rs when using NA T , as all incoming connection attempt s will point to your router unless you specifically create V irtual Server entries to [...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Example: If you like to remote accessing your Router through the W eb/HTTP at all time, you would need to enable port number 80 (Web/H TTP) and map to Router ’s IP Address. Then all incoming HTTP request s from you (Remote side) will be forwarded to the Router with IP address of 192.168.[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Edit DMZ Host The DMZ Host is a local computer exposed to the Internet. When setting a p articular internal IP address as the DMZ Host, all incoming packet s will be checked by the Firewall and NA T algorithms then passed to the DMZ host, when a packet received does not use a port number u[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Edit One-to-One NA T (Netw ork Address T ranslation) One-to-One NA T maps a specific private/local IP address to a global/public IP address. If you have multiple public/W AN IP addresses from you ISP , you are eligible for One-to-One NA T to utilize these IP ad dresses. NA T T ype: Select [...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Time Schedule: A self-defined time period to enable your virtual server . Y ou may specify a time schedule or Always on for the usage of this V irtual Server Entry . For setup and detail, refer to Tim e Schedule section Application : Users-defined description to identify this entry or clic[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Example: List of some well-known and registered port numbers. The Internet Assigned Numbers Authority (IANA) is the central coordinat or for the assignment of unique parameter values for Int ernet protocols. Port num bers range from 0 to 65535, but only ports numbers 0 to 1023 are reserved[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Time Schedule The T ime Schedule supports up to 16 time slot s which helps you to manage your Internet connection. In each time profile, you may schedule specific day(s) i.e. Monday through Sunday to restrict or allowing the usage of the Internet by users or applications. This T ime Schedu[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Configuration of Time Schedule Edit a Time Slot 1. Choose any T ime Slot (ID 1 to ID 16) to edit, click Edit. Click Edit Note: Watch it carefully, the days you have sel ected will pres ent in capital letter. Lower case letter shows the day(s) is not selected, and no ru le will apply on thi[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Advanced Configuration options within the Advanced section are for users who wish to take a dvantage of the more advanced features of the router . Users who do not underst and the features should not attempt to reconfigure their router , unless advised to do so by support staff. Here are i[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Dynamic DNS The Dynamic DNS function allows you to alias a dynamic IP address to a static hostname, allowing users whose ISP does not assign them a st atic IP address to use a domain name. This is especially useful for hosting servers via your SHDSL connection, so that anyone wishing to co[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Check Email This function allows you to have the router chec k your POP3 mailbox for new Email messages. The Mail LED on your router will light when it detects new messages waiting for download. Y ou may also view the status of this function using the S tatus – Email Checki ng section of[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Device Management The Device Management advanced configuration settings al low you to control your router ’s security options and device monitoring features. Embedded Web Server ( 2 Management IP accounts) HTTP Port: This is the port number the router’s embedded web server (for web-bas[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration After 100 seconds, the device will au tomatically logout User A. Universal Plug and Play (UPnP) UPnP of fers peer-to-peer network connectivity for PCs and other network devices, along with control and data transfer between devices. UPnP offers many advantages for users running NA T routers[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration  IP group  ICMP group  TCP group  UDP group  EGP (not applicable)  T ransmission  SNMP group From RFC1650 (EtherLike-MIB):  dot3S tat s From RFC 1493 (Bridge MIB):  dot1dBase group  dot1dTp group  dot1dS tp group (if configured as spanning tree) From RFC 14[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration IGMP IGMP , known as Internet Group Management Protocol , is used to management host s from multicast group. IGMP Forwarding: Accepting multicast p acket. Default is set to Enable. IGMP Snooping: Allowing switched Ethernet to check and make correct forwarding decisions. Default is set to D[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Ethernet1: P2, P3 and P4 (Port 2, 3, 4) Please uncheck P2, P3, P4 from Ethernet VLAN Port first. Note: You should setup each VLAN g roup with caution. Each Bridge Interface is arranged in this order. Bridge Interface VLAN Port (Always start s with) Ethernet P1 / P2 / P3 / P4 Ethernet1 P2 /[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration S paces next to VPI and VCI, type 0 and 33 in respectively . Select appropriate A TM Class, Encapsulation Method, Accept able Frame T ype, Filter T ype and PVID for Unt agged Frames. VPI and VCI: Enter the information provided by your ISP . A TM Class: The Quality of Service for A TM layer[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Step 3: Setup VLAN Service Go to Configuration  Advanced  VLAN Bridge DefaultVlan lists all member port s. It is necessary to group specific member ports for each VLAN. From the example, two VLAN groups are requested: Dat a and Video. T o create another VLAN group for Video by clicki[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Mapping the VLAN Bridge with Bridge Interface created in S tep1, you will see the conformable relationship in these two screenshot s. Step 4: IGMP Snooping Enable Go Configuration  Advanced  IGMP . IGMP Snooping must be enabled in order to allow video stream forwarding correctly . Sa[...]

SHDSL VPN Fire w all Bridge/Router Chapter 4: Configuration Logout T o exit the router ’s web interface, choose Logout . Please ensure that you have saved the configuratio n settings before you logout. Be aware that the router is restricted to only one PC accessing the configuration we b pages at a time. Once a PC has logged into the web interfac[...]

SHDSL VPN Fire w all Bridge/Router Chapter 5: T roubleshooting Chapter 5: T roubleshooting If the router is not functioning properly , first check this chapter for simple troubleshooting before contacting your service provider or Billion support. Problems st arting up the router Problem Corrective Action None of the LEDs are on when you turn on the[...]

SHDSL VPN Fire w all Bridge/Router Appendix A: Product Support and Contact Information APPENDIX A: Product Support and Cont act Information Most problems can be solved by referring to the T roubleshooting section in the User ’s Manual . If you cannot resolve the problem with the T roubleshooting chapter , please contact the dealer where you purch[...]