Bissell 3760 Series manuale d’uso

USER’S GUIDE 3760 SERIES 220-240V Safety Instructions 3 Product Diagram 4 Assembly Instructions 4-6 Operation / Special T ools 6-9 Maintenance 10-13 T roubleshooting 14 Warranty 16 Replacement Parts 15 Consumer Services 15 ug603-5570_3760E_1105.indd 1 ug603-5570_3760E_1105.indd 1 2/2/06 4:12:08 PM 2/2/06 4:12:08 PM[...]

2 Thanks For Buying A BISSELL Lift-Off ™ Spinpower We’re glad you purchased a BISSELL Lift-Off Spinpower vacuum. Everything we know about floor care went into the design and construction of this powerful, high-tech home vacuuming system. Y our BISSELL Lift-Off Spinpower vacuum is well made, and we back it with a limited comprehensive two-year w[...]

3 IMPOR T ANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be observed, including the following: READ ALL INSTRUCTIONS BEFORE USING Y OUR UPRIGHT V ACUUM. W ARNING: T o reduce the risk of fire, electric shock, or injury: ■ Use indoors only . ■ Do not leave machine when it is plugged in. ■ Do not use with da[...]

4 C AUTION: Do not plug in your vacuum cleaner until you are familiar with all instructions and operating pr ocedures. Power Switch Crevice T ool Handle Quick Release Cord Wrap Handle Release Pedal Powerfoot Stretch Hose Power Cord Furniture Protection Guard Height Adjustment Knob Upper T ank Dirt Container Pre-Motor Filter Lock ’n Seal ™ Lever[...]

How T o Use This Guide This User’ s Guide has been designed to help you get the most satisfaction from your BISSELL Lift-Off Spinpower vacuum. Y ou’ll find assembly and operating instructions, safety precautions, as well as maintenance and troubleshooting instructions. Please read this User's Guide thoroughly before assembling your vacuum [...]

Snap the Metal T elescoping Extension Wand, Crevice T ool, and Combination T ool into storage clips as shown. On Board T urboBrush ™ (Select Models Only) The T urboBrush Bracket slides onto the Hanger on the front of the Handle. Attach the Bracket by aligning the slots with the rectangular part on the Hanger as shown and pulling down until it is [...]

The Powerfoot on your BISSELL Lift-Off Spinpower vacuum can be adjusted to clean several floor surfaces. NOTE: For optimal c leaning performance, adjust to the lowest practical setting. If your cleaner is difficult to push, adjust to the next higher setting. Place Handle in Upright Position. T urn Height Adjustment Knob to desired setting. Lowest S[...]

T urboBrush ™ (Select Models) : Use rotating brush action for small areas such as stairs and upholstery . Note: Press gently when using T urboBrush to gain maximum cleaning. T oo much pressure could cause the brush to stop rotating. Deluxe Bare Floor T ool (Select Models): Use for bare floors. Swivel head turns to get into tight spaces and fits u[...]

9 Select Models Only The Shoulder Strap may be used while cleaning with the Detachable Cylinder . T o attach the Shoulder Stra p, wrap the V elcro ends attached to the bottom of the strap securely around the Cylinder handle as shown. T o obtain maximum strength, overlap the loose ends completely and press securely in place. The plastic Buckle must [...]

Upper T ank Knob T o maintain maximum cleaning performance, the following maintenance steps must be performed: Empty the Dirt Container when the dirt reaches the “Full” line on the front. Check the Upper T ank and Pre-Motor Filters at least once a month and clean and replace as needed. Replace the HEP A Media Post-Motor F ilter ever y six month[...]

Use only BISSELL Style 8 Replacement Filters in your BISSELL Lift-Off Spinpower . Unplug the vacuum from electrical outlet. The Pre-Motor Filter protects the motor from dirt partic les. It is located in the slide out tray underneath the Dirt Container . If the Filter becomes dirty , pull out the tray , lift out the F ilter and clean. This Filter ma[...]

Place one end of the new Drive Belt over Motor Pulley and the other end over the Brush in the space between the bristles. Pull the Brush firmly to stretch the Drive Belt and place ends of Brush down into slots on sides as shown. T urn Brush several times by hand to center the Drive Belt. Reposition Brush Cover and screws. Tighten screws securely . [...]

Low suction or poor pickup may be due to a clog in the vacuum cleaner . If you notice a change in the sound of the motor or a reduction in the spinning action, check for clogs. Unplug cleaner from electrical outlet. Empty Dirt Container . Check Upper T ank for build up or clogs. Remove the Upper T ank and check the suction inlet for a clog. Grasp t[...]

Vacuum c leaner won’t run P ossible Causes Remedies Power cord not plugged in Check electrical plug Thermal protector activated Allow cleaner to cool for 30 minutes, see pg. 13 No P ower at Rotating Floor Brush P ossible Causes Remedies Cylinder is not securely seated Remove Cylinder and replace, making sure that it “c licks” into place Brush[...]

15 Replacement P arts – BISSELL Lift-Off Spinpower Series BISSELL Consumer Services 1 2 3 456 7 Item Part No. Part Name 1 3200 Style 8 Drive Belt (2-Pack) 2 203-1063 Crevice T ool 3 203-1099 Dusting Brush/Upholster y T ool 4 203-6624 Stair Cleaning T ool (Select Models) 5 203-6830 Metal T elescoping Extension Wand 6 203-6831 Deluxe Bare Floor T o[...]

Warranty 16 This warranty gives you specific legal rights, and you may also have other rights which may var y from country to countr y . If you need additional instruction regarding this warranty or have questions regarding what it may cover , please contact BISSELL Consumer Services by telephone, or regular post as described below , or contact you[...]