Bosch Appliances DVR-8K manuale d’uso

Divar MR Digital V ideo Recorder T ype numbers D VR-8K, DVR-16K, D VR-8L, D VR-16L en Operation Manual_en[...]

[...]

Digital Video Recorder T able of contents | en 1 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 T able of cont ents 1 Safety 3 1.1 Important safety instructions 3 1.2 Safe ty precautions 4 1.3 Important N otices 4 2 Introduction 9 2.1 Featur es 9 2.2 Accessories 10 2.3 F ront panel 11 2.4 Back panel 13 2.5 Remot e Control 14 3 Connections[...]

2 en | T able of contents Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 5.4 EXPORT 80 6 Control Center 83 6.1 PC minimum Requirements 83 6.2 Control Cent er installation 83 6.3 Connecting to t he DVR 83 6.4 Main screen of DVR Contr ol Center Pr ogram 86 6.5 Live Mode 88 6.6 Search mode 93 6.7 Remot e Setup mode 97 [...]

Digital Video Recorder Safe ty | en 3 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 1 Saf ety 1.1 Impor tant safety instructions Read, follo w , and retain f or future r eference all of t he follo wing safe ty instructions. Heed all warnings on the unit and in the operating instructions before operating the unit. 1. Cleaning - Unplug the[...]

4 en | Safe ty Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems – unit does not operat e normally when the user correctly f ollow s the operating instruc- tions. 14. Replacement parts - Be sure the service technician uses replacement parts specified by the manufacturer, or that have the same characteristics as the o[...]

Digital Video Recorder Safe ty | en 5 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 All-pole power switch - Incorporate an all-pole po wer switch, with a contact separation of at least 3 mm in each pole, int o the electrical installation of the building. If it is needed t o open the hous- ing for servicing and/or other activities, use th[...]

6 en | Safe ty Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Moving - Disconnect the pow er befor e moving the unit. Mov e the unit with care. Ex cessive f orce or shock ma y damage the unit and the hard disk drives. Outdoor signals - The installation for outdoor signals, especially r egarding clearance from po wer[...]

Digital Video Recorder Safe ty | en 7 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Trademarks All hardwar e and software product names used in this document ar e likely t o be registered trade- marks and must be treat ed accordingly . NOTICE! This operation manual has been compiled with great car e and the inf ormation it contains has b[...]

8 en | Safe ty Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems[...]

Digital Video Recorder Introduction | en 9 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 2 Introduction 2.1 F eatures • Stable embedded operating system. • Small fi le sizes with MPEG-4 compression. • Internal storage capacity to 2TB. • NTSC and PAL selectable video format. • Full realtime recording: - Up to 480IPS@352 X 240: [...]

10 en | Introduction Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems • Covert camera protection. • User management (User level control). • PTZ Control: - For more details see "8.2.4 Supported PTZ camera list". - Dome camera telemetry control (Dome OSD control). Note: Model DVR-16L (16 Channel) is used[...]

Digital Video Recorder Introduction | en 11 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 2.3 F ront panel DVR-16K / D VR-16L ab c d e f gh i j k l DVR-8K / D VR-8L ab c d e f gh i j k l Figure 2.2 Front panel a Arrow Buttons ( b B v V ): Select or move between the menu options. ( ENTER): Confi rms menu selections. b Function Buttons : [...]

12 en | Introduction Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems c Disc Tray (DVR-8L and DVR-16L only) Insert a disc here. d Channel Buttons You can input a number with the channel buttons. You can also use the channel buttons for sub-function with ALT button (The COPY, IRIS +, SET, CLEAR, MOVE and TOUR buttons o[...]

Digital Video Recorder Introduction | en 13 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 2.4 Back panel DVR-16K / D VR-16L ab c de f g h i j k f l m n o DVR-8K / DVR-8L ab c de f g h i j k l m n o Figure 2.3 Back panel a VIDEO INPUT: Connect the camera’s video output to these BNC connectors. b LOOP OUT: The signal from VIDEO INPUT con[...]

14 en | Introduction Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems m MON A (BNC Type Connector): Connect to main monitor or display device. n VGA: Connect a VGA monitor. o USB Ports: Connect optional extension USB devices (e.g. mouse, memory stick). 2.5 Remot e Control Figure 2.4 Remot e control. • LOCK: Displays[...]

Digital Video Recorder Introduction | en 15 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 • ENTER: Confi rms menu selections or go to full screen of a selected camera in multiscreen. Pressing this key again to return from full screen to multiscreen. • COPY: Copies the recorded data to an external device. • SEARCH: Displays the sea[...]

16 en | Introduction Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems[...]

Digital Video Recorder Connections and settings | en 17 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3 Connections and settings Precautions • There are various ways to connect the unit, depending on the camera and other equipment. Please refer to the camera manual or the manuals for other devices as necessary for additional connection[...]

18 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems a Connect the cameras to the BNC loop-through camera inputs (automatically terminated). b Connect the Monitor, DVR, VCR, or others to the video out BNC. c Connect the power cord to the unit. d Connect an audio amplifi er. e Connect a pa[...]

Digital Video Recorder Connections and settings | en 19 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.5 CCT V ke yboard connections The ke yboard input connect or is used t o connect an ext ernal CCT V ke yboard t o the unit. Connect the k eyboard t o the KBD IN connect or . For short distances (up to 30m), standard 6-cor e telecom fla[...]

20 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.8 Connecting a RS-422/485 device Use this por t t o connect PTZ cameras. Connect the PTZ serial communication lines to t he RS-422/485 terminal. Not es: • When connecting lines, connect the TX - of the DVR t o RX - of the PTZ unit an[...]

Digital Video Recorder Connections and settings | en 21 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.9 Connecting the BIPHASE por t The Biphase por t is used for connecting cameras that use Bosc h Biphase communications to control camera positioning. Five Biphase outputs ar e provided f or dome camera and pan, tilt and zoom control. T[...]

22 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.10 Connecting the ALARM I/O por t Alarm inputs and outputs are supplied via a 25-pole D-type sock et. The screw t erminal input/output connection board supplied with the unit sim plifies all alarm connections to the unit. 1 13 14 25 1A[...]

Digital Video Recorder Connections and settings | en 23 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Alarm_in_11 11 Alar m input 11 Alarm_in_12 12 Alar m input 12 Alarm_in_13 13 Alar m input 13 Alarm_in_14 14 Alar m input 14 Alarm_in_15 15 Alar m input 15 Alarm_in_16 16 Alarm input 16 Relay1_A 17 Relay 1 output pole 1 Relay2_A 18 Relay [...]

24 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems • It is not possible to connect the VGA monitor and the composite monitor simultaneously. Consequently, the user is obliged to choose either the composite monitor or the VGA monitor. When set to composite monitor there is no VGA output[...]

Digital Video Recorder Connections and settings | en 25 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Figure 3.7 The B button on t he front panel Not e: You can select the monitor type by using the A ( ) or B ( ) button at any time. If you change the monitor type, the system will be rebooted automatically. 3.13 General explanation of the[...]

26 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems a Channel Number: Displays the channel number. b Camera Name: Displays the edited camera name. c Recording status icon: Displays the recording status. • Red “Dot icon” indicates Instant recording. • Yellow “Running man icon” [...]

Digital Video Recorder Connections and settings | en 27 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.14 Selecting live scr een mode 3.14.1 Monitor A Y ou can select the live screen mode t o display a full, 4-vie w , 6-view , 8-view , 9-view or 16-view screens on the main monit or . 1. Press A ( ) button or click the icon in the system[...]

28 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.14.2 Monitor B You can select the live screen mode to full or 4-view screens on the monitor B. 1. Press B ( ) button or click the icon in the system control bar. The screen mode select menu of monitor B is displayed on the monitor A. 2[...]

Digital Video Recorder Connections and settings | en 29 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 a b c d e f g h i j k l m n o Figure 3.11 The PTZ vir tual remot e control. Button F unction a Remove t he PTZ vir tual remot e control. b Use to pan/tilt the camera. c Confirm the preset position. d Adjust the camera zoom. e Manually ad[...]

30 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems m Register pr eset positions. n Move t he camera to the pr eset position. o Sends the Aux ON command. (Used only f or BOSCH Aut o Dome camera). Table 3.5 The PTZ vir tual remot e control button function table 3.15.1 Preset settings Prese[...]

Digital Video Recorder Connections and settings | en 31 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Not e: This function may no t be available depending on PTZ cameras. 3.15.5 To tour the preset positions You can tour all preset positions. 1. Press the TOUR button or Click the [TOUR] icon. All registered preset positions in the camera [...]

32 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.16 Viewing Syst em Information To view system information: 1. Press INFO or click the INFO icon in the system control bar. The system information window is displayed on the main monitor. Figure 3.12 Syst em information windo w 2. Press[...]

Digital Video Recorder Connections and settings | en 33 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3. Press LOG or click the [Exit(LOG)]button to exit the window. • The syst em log list: No. Log Message No. Log Message 1 Power On 24 Export F ailed 2 Power Off 25 S/W Updat ed 3 Power Reco ver y 26 HDD Added (HDD1) 4 Admin Login (Remo[...]

34 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.18 Configuration Menu The featur es and options of the DVR ar e configured through the menu. The operations of this unit can be set via a menu displa yed on the main monit or . Y ou can select and set the operational conditions by usin[...]

Digital Video Recorder Connections and settings | en 35 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.18.1 Using a mouse to set a menu Use the left and right mouse buttons t o set the menu. • Left button: Use to select a required item or decrease the options value. • Right button: Use to increase the options value. 1. Click the ico[...]

36 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.19 Camera settings 3.19.1 Camera The camera name, covert and input audio channel settings are configured. Figure 3.15 Camera setup menu • Ch: Displays the channel number. • Name: Enter the camera name using up to 12 characters. - b[...]

Digital Video Recorder Connections and settings | en 37 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.19.2 Video adjustment Adjust the brightness, contrast and color settings of eac h camera channel. Y ou can see the settings screen from t he previe w window s. Figure 3.16 Video adjustment setup menu • Channel: Selects t he desired c[...]

38 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.19.3 PTZ Settings f or the PTZ cameras connected via t he data por t of the biphase connecter or RS-422/485 terminal. Figure 3.17 PTZ setup menu. • Camera: Selects the desired camera to set the connected PTZ camera. • COM port: Sel[...]

Digital Video Recorder Connections and settings | en 39 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.19.4 Continuous recording Settings concerning continues recording. Figure 3.18 Continuous recording setup menu • Ch: Displays the channel number. • Resolution: Selects the recording resolution. • Quality: Selects the recording pi[...]

40 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.19.5 Instant recording Settings concerning instant recording. Figure 3.19 Instant recording setup menu • Ch: Displays the channel number. • Resolution: Selects the recording resolution. • Quality: Selects the recording picture qu[...]

Digital Video Recorder Connections and settings | en 41 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.19.6 Input recording Settings concerning input recor ding. Figure 3.20 Input recording setup menu • Ch: Displays the channel number. • Resolution: Selects the recording resolution. • Quality: Selects the recording picture quality[...]

42 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.19.7 Motion recording Settings concerning motion r ecording. Figure 3.21 Motion recording setup menu • Ch: Displays the channel number. • Resolution: Selects the recording resolution. • Quality: Selects the recording picture qual[...]

Digital Video Recorder Connections and settings | en 43 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.19.8 Video format Selects the video format t o NTSC or P AL according to y our video syst em format. 1. Select the video format. The confi rmation message is displayed. 2. Select [OK] and press ENTER. After the HDD has been formatted,[...]

44 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Figure 3.23 Schedule setup menu 3.20.1 To set the Recording Schedule for a typical day of the week 1. Select a day of the week. (Sun, Mon, Tue, Wed, Thu, Fri or Sat) 2. Select the desired channel to schedule recording. 3. Select the time[...]

Digital Video Recorder Connections and settings | en 45 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 - Green (Input+Motion recording): Recording starts automatically when the input is activated or motion has been detected. - Blue+Red (Continuous+Input event recording) : Recording starts automatically from the preset time. When the input[...]

46 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.20.2 To set a recording schedule for an Exception days In addition to t he weekly schedule, up t o 10 specif ic date/time periods can be defined. T o configure the specific recording schedule select Specific Dat es. 1. Select the [Exce[...]

Digital Video Recorder Connections and settings | en 47 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Figure 3.29 Exception days setup menu 4. Enter the necessary information for year, month and date. • b/B/v/V : Press to move the columns, [OK] or [Cancel] buttons. • b/B (or left/right mouse button): Changes the value at the current [...]

48 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.20.3 Checking the Exception days schedule list 1. Press INFO when the “Exception days” option is selected. The exception days scheduled list appears. Figure 3.31 Exception days scheduled list 2. Select a exception day title on the [...]

Digital Video Recorder Connections and settings | en 49 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Figure 3.32 Channel copy menu 4. Use b/B to move to the left or right column then press ENTER to select the target channel(s). You can cancel the selected channel by pressing ENTER. 5. Use v/V to select [OK] then press ENTER to confi rm[...]

50 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.21 Display settings 3.21.1 OSD Figure 3.34 OSD setup menu • Language: Select a language for the setup menu and information display. • Camera name - On: Displays the title of the camera. - Off: Displays the live picture without the [...]

Digital Video Recorder Connections and settings | en 51 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.21.2 Monitor A Figure 3.35 Monitor A setup menu • Seq. dwell time: You can set the camera sequence time to 2 sec, 5 sec, 10 sec, 20 sec, 30 sec, 40 sec, 50 sec, 60 sec, 70 sec, 80 sec or 90 sec. 3.21.3 Monitor B Figure 3.36 Monitor B[...]

52 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems • Seq. dwell time: You can set the camera sequence time to 2 sec, 5 sec, 10 sec, 20 sec, 30 sec, 40 sec, 50 sec, 60 sec, 70 sec, 80 sec or 90 sec. • Event popup: Displays an event popup on the monitor B if motion, input or all (motio[...]

Digital Video Recorder Connections and settings | en 53 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.22.2 Motion Figure 3.38 Motion setup menu • Camera: Select the camera to set motion detection. • Sensitivity: Set the level of sensitivity for the created motion detection area. Sensitivity can be set from level 01 to 10 or Off. ?[...]

54 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.22.3 Alarm acknowledgement Figure 3.39 Alarm acknowledgement setup menu • Alarm ackn. - Manual: Use the ACK button on the remote control or button on the front panel to stop alarm. - Post-event time: The alarm is stopped after the pr[...]

Digital Video Recorder Connections and settings | en 55 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.23 Network settings 3.23.1 TCP/IP Figure 3.40 TCP/IP setup menu • DHCP: DHCP stands for Dynamic Host Confi guration Protocol. - On: Network settings of this unit are confi gured automatically by the DHCP server. If you set to ON, t[...]

56 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.23.2 DDNS (Dynamic Domain Name System) Figure 3.41 DDNS setup menu • User name: Enter the DDNS registered user name using the virtual keyboard. • Password: Enter the user password in [User name] using the virtual keyboard. Not e: T[...]

Digital Video Recorder Connections and settings | en 57 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.23.3 Notification Figure 3.42 Notification setup menu • Alarm on: - On: Sends an e-mail when an input has been activated. - Off: Not used. • Motion detect: - On: Sends an e-mail when motion detection has been activated. - Off: Not [...]

58 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.23.4 Mail Figure 3.43 Mail setup menu • Notifi cation - On: Notifi es the user by e-mail of unit operating information, according to notifi cation settings. - Off: The notifi cation function is not used. The mail options are dimm[...]

Digital Video Recorder Connections and settings | en 59 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.23.5 Emergency Figure 3.44 Emergency setup menu • Notifi cation: - On: Notifi es the Alarm notifi er program about unit operating information according to your notifi cation settings. - Off: Notifi cation function is not used. ?[...]

60 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.24 Syst em settings 3.24.1 Date/Time Figure 3.45 Date/Time setup menu • Date: Enter the current date. • Time: Enter the current time. (24 HR or 12 HR) • Date format: Select the date display format. • Time format: Select the tim[...]

Digital Video Recorder Connections and settings | en 61 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.24.2 NTP Figure 3.46 NTP setup menu • NTP: Set to On when using the NTP (Network Time Protocol) server for time adjustment. If the NTP is set to Off, the time settings should be entered manually and the [Time server], [Private time s[...]

62 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.24.3 Beeper Figure 3.47 Beeper setup menu • Button beeper - On: Makes a sound when using the buttons. - Off: Turns off the button beep. • Input beeper - On: Makes a sound when a input is activated. - Off: Turns off the input beeper[...]

Digital Video Recorder Connections and settings | en 63 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.24.4 User Y ou can register a ne w user with various access rights t o the DVR or Control Cent er . Figure 3.48 User setup menu • No.: Displays the user number. • ID: Enter the new user ID using the virtual keyboard. • Level: Sel[...]

64 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.24.5 Update The update f eature allo ws y ou to upgrade D VR software and add/upgrade PTZ prot ocols. In this case, the current DVR se ttings are not dele ted or r eplaced during the updat e process. Figure 3.49 Update setup menu 1. Se[...]

Digital Video Recorder Connections and settings | en 65 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.24.6 Configuration Figure 3.50 Configuration setup menu • Import confi guration: Import the DVRs confi guration data from the USB memory stick. • Export confi guration: Export the confi guration data from this DVR to the USB me[...]

66 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.24.7 Hard disk Figure 3.51 Hard disk setup menu • Overwrite: - All: Overwrite recording is possible when the normal partition and event partition of HDD have fully recorded. - Normal partition: Overwrite recording is possible for nor[...]

Digital Video Recorder Connections and settings | en 67 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 3.24.8 Backup Figure 3.52 Backup setup menu • Partition selection: Select a backup partition. • Schedule: You can set the backup schedule. - Off: All options are disabled. - Instant: The backup data is saved manually. - Weekly or dai[...]

68 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Not es: • The backup function is no t suppor ted on t he ext ernal USB CD-ROM drive. • Backup t o external USB HDD is supported with maximum 250 GB. • Use the recommended e xternal USB de vices for pr eventing malfunction (See “8[...]

Digital Video Recorder Connections and settings | en 69 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 - 1st. Status of making ISO image - 2nd. Status of writing Daily/W eekly backup 1. Connect the USB device for backup. You cannot use the CD or DVD writer for daily or weekly backup. 2. Select Weekly or Daily on the schedule options. 3. S[...]

70 en | Connections and settings Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 3.24.9 System Figure 3.53 System setup menu • IR remote controller: Select the IR remote ID for this unit (01~09). If you use multi systems set the IR remote ID for each DVR unit. • DVR ID: Select the DVR ID for this unit (01~16). If[...]

Digital Video Recorder Recording | en 71 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 4 Recording Images from a camera will be recor ded on the built-in hard disk. Not e: External recording devices can be used as copy areas for images recorded on the hard disk. It is impossible to record images on the external recording devices directly[...]

72 en | Recording Digital V ideo Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Not es: • Y ou can not record the Instant and Continuous r ecording under the f ol- lowing conditions. - A HDD is not f ormatted. - The channel has no video input f or display . - Overwrite is set t o “Off ” or “Event Partition” , and normal[...]

Digital Video Recorder Search and pla yback | en 73 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 5 Search and pla yback 5.1 Playback It is possible to pla y a recor ded image without stopping r ecording. 1. Select a channel you want to playback. 2. Press bB to play a recorded image of the previous 2 minutes of recording. The playback im[...]

74 en | Search and pla yback Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Figure 5.2 Search menu tab 3. Use b/B to select [INTERNAL HDD] then press ENTER. Figure 5.3 Source device select menu 4. Use b/B to select the desired source device. • INTERNAL HDD: Plays back or searches recorded contents of the internal [...]

Digital Video Recorder Search and pla yback | en 75 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Figure 5.4 Date/time search menu 1. Select the [Date/time search] menu. 2. Use v/V/b/B to select the year, month, date, hour or minute column, then press ENTER. 3. Use b/B to input the date or time. 4. Press ENTER to confi rm it. 5. Select [...]

76 en | Search and pla yback Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Not es: • Recorded data shown on t he time graph will be displayed in differ ent colors depending on the recor ding type. - Blue : Continuous/Instant recor ding. - Red: Input recor ding. - Y ellow : Motion-det ection recording. - Gray: No [...]

Digital Video Recorder Search and pla yback | en 77 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 6. Select the recording data on the event list then press bB , click [Play ( B )] or double click the selected data to start playback. The picture is displayed on the monitor A. 7. Press STOP ( x ) to stop playback and return to the event li[...]

78 en | Search and pla yback Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Figure 5.9 Motion detect list 7. Select the recording data on the motion detect list then press bB , click [Play ( B )] or double click the selected data to start playback. The picture is displayed in the main monitor. 8. Press STOP ( x ) to[...]

Digital Video Recorder Search and pla yback | en 79 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Not es: • If you want t o delete the bookmark on the list, pr ess the CLEAR button. • Backup data can no t be play ed back by a bookmark sear ch. • Y ou can register a bookmark only in the single c hannel playback. • Y ou can not reg[...]

80 en | Search and pla yback Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 5.4 EXPORT This unit can manually copy r ecorded images and audio from built-in HDD t o the e xternal r ecording devices. 1. Press COPY or click . The export menu window appears. Figure 5.11 Export menu window 2. Select a target device to ex[...]

Digital Video Recorder Search and pla yback | en 81 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Not es: • Y ou can also use the COPY button on the fr ont panel for e xpor t function. - DVR-16K/DVR-16L: Pr ess AL T and then COPY butt on. - DVR-8K/DVR-8L: Pr ess COPY button onl y . • Y ou can expor t the recorded data onl y in the li[...]

82 en | Search and pla yback Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems[...]

Digital Video Recorder Control Cent er | en 83 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 6 Control Cent er Control Cent er is the netw ork program of the DVR-8K/D VR-8L and DVR-16K/DVR-16L. This manual is written based on D VR-16L (16 channels). The description pictures ma y differ from y our OS (Operating Syst em) type. The pictures[...]

84 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems The connection list menu is displayed. Figure 6.1 Connection list window 3. Select [Add] and the connection setup menu is displayed. Figure 6.2 Connection setup window 4. Enter the site name, IP address and port. - Site Name: Enter the descriptio[...]

Digital Video Recorder Control Cent er | en 85 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Not e: In the case of entering the server name instead of the IP Address, set up the DDNS confi guration properly in the server. 6.3.2 User log on 1. Select the registered site name and right click the mouse. 2. Select [User Log on]. 3. Enter th[...]

86 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 6.4 Main screen of DVR Contr ol Center Pr ogram Figure 6.5 Main screen of DVR Control Center Program 1. Program Menu • File - Exit: Exit the program. • View - OSD > Channel Number: Displays or removes the channel number in the channel wind[...]

Digital Video Recorder Control Cent er | en 87 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 You can search the recorded data as shown below. - Date/Time Search (See "6.6.1 Using the Date/Time Search function") - Event Search (See " 6.6.2 Using the Event Search function") - Bookmark Search (See "6.6.3 Using the B[...]

88 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 6.5 L ive Mode 6.5.1 Using the Camera View 1. Select the [Camera View] tab in the live mode. 2. Select the registered site name and double click the left mouse button or click the plus mark of the registered site name. 3. Select [Cameras] and dou[...]

Digital Video Recorder Control Cent er | en 89 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 6.5.2 Using the live window Playback of Recorded Data A B C D E Figure 6.9 Camera View window 1. Select the camera’s display window. 2. Select the date. The day is displayed in a blue text when recorded data exists. 3. Select playback start tim[...]

90 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 1. Select the PTZ camera channel window in the camera view mode. 2. Select Pan/Tilt/Zoom tab. 3. Use virtual remote control buttons to control the PTZ camera. Button F unction Use to Pan/Tilt the camera. T o confirm the preset position and set a [...]

Digital Video Recorder Control Cent er | en 91 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Not e: The preset range is a vailable from 0 t o 255 on this unit. How ever t he actual preset range differ s depending on the PTZ cameras. Changing to a picture in a pr eset position The following function is available only with cameras equipped[...]

92 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 6.5.4 Using the Log View function Y ou can see the syst em log list of selected sit e names in the remo te se tup tab via the netw ork. 1. Select the log view tab. Log search menu appears. Figure 6.11 The log search menu window 2. Click the date [...]

Digital Video Recorder Control Cent er | en 93 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Figure 6.13 The system log list window 6.6 Search mode Y ou can search the data of a select ed site name in t he remot e setup tab via t he network. 6.6.1 Using the Date/Time Search function Use to sear ch a recor ded picture by specifying dat e,[...]

94 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Check this bo x when you w ant to vie w from all camera c hannel window s. Display s selected camera number . Figure 6.15 Camera channel select window 4. Use the timeline and time input column to search recorded data. Figure 6.16 Recorded data se[...]

Digital Video Recorder Control Cent er | en 95 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 The event list is displayed. 6. Select the event from the event list. 7. You can play the searched data using the playback control buttons. 6.6.3 Using the Bookmark search function Search the desired picture with a registered bookmark using the b[...]

96 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 1. Select the Smart Search tab. 2. Click the date icon and select the day. (The selectable days are displayed in blue color.) 3. Select the camera channel. 4. Select the start time using the timeline. Figure 6.21 Selected start time 5. Select the[...]

Digital Video Recorder Control Cent er | en 97 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Figure 6.24 The searched data list 8. Select the channel from the list. 9. You can play the searched data using the playback control buttons. 6.7 Remote Setup mode Y ou can set the DVR of a select ed site name in t he remot e setup tab via t he n[...]

98 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Camera Setting Figure 6.26 The Camera setting window 1. Select a channel for settings. If you want to block a channel from other users, mark up the convert option. 2. Enter the new channel name. 3. Select input audio channel. 4. Set the PTZ contr[...]

Digital Video Recorder Control Cent er | en 99 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Continuous recording settings 1. Click the [Continuous Rec] button. The continuous recording setting window appears. Figure 6.27 The Continuous recording se tting window 2. Set each option using the mouse (see "3.19.4 Continuous recording&qu[...]

100 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Input recording settings 1. Click the [Input Rec] button. The instant recording setting window appears. Figure 6.29 The Input recor ding setting window 2. Set each option using the mouse (see "3.19.6 Input recording"). 3. Click the [OK[...]

Digital Video Recorder Control Cent er | en 101 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Display settings Figure 6.31 The Display se tting window 1. Set the OSD options. 2. Set the monitor A option. 3. Set the monitor B options. 6.7.2 Schedule setup Figure 6.32 The Schedule setup windo w 1. Select a day of the week. 2. Mark up the d[...]

102 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 4. Click the start time cell block and drag & drop to select a time period cell block. or Click the start time cell block of a channel and drag & drop across the c hannels to select t he time period block for multi-c hannel setting at th[...]

Digital Video Recorder Control Cent er | en 103 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 6. Enter the name of the exception day. 7. Click the add button to add the special day settings. The exception day is added to the list. If you want to cancel the registered exception day, select the exception day in the list and click the delet[...]

104 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 6.7.4 Network setup Figure 6.36 The Network setup windo w TCP/IP settings The [DHCP], [IP address], [Subnet mask], [Gat ew ay], [Primary DNS], [Secondar y DNS] and [Remo te client por t no.] option settings ar e not available in t he client prog[...]

Digital Video Recorder Control Cent er | en 105 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 • Video loss: Sends an e-mail when a video signal from the camera has stopped because of a cable disconnection or malfunction of a camera. • Motion detect: Sends an e-mail when motion detection has occurred. • Power on/off: Sends an e-mail[...]

106 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems • NTP: Mark up when using the NTP (Network Time Protocol) server for time adjustment. • Date format: Select the date display format. • Time zone: This option setting is not available in the Control Center program. • Server: Select your t[...]

Digital Video Recorder Control Cent er | en 107 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 User settings Add User You can add user. 1. Click the “Add” button. User Setting window is displayed. 2. Enter the User ID and Password. 3. Enter the password again to verify. 4. Select the user level and then click “OK” to confi rm you[...]

108 en | Control Cent er Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems • Site Name: Displays the selected site name. • Channel: Select a channel(s) to export the data. You can select more than one channel. Click on the icon to select or de-select all cameras. • Audio: Set to On or Off to export the audio data[...]

Digital Video Recorder Additional programs | en 109 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 7 Additional programs 7.1 Alarm Notifier program If you se t the notification in the emergency option t o On, the sy stem sends a message accor ding to the settings of the no tification options in the setup menu. (See “3.23.3 Notification?[...]

110 en | Additional programs Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 7.2 Main Screen of Alarm Notifier program ab c de f g h i Figure 7.3 Main Screen of Emergency Agent a Displays message type. b Displays IP Address. c Displays received date and time. d Displays the port settings window. e Displays the search[...]

Digital Video Recorder Additional programs | en 111 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 7.2.1 Port setting Figure 7.4 Port setting window 1. Click the button. The option window is displayed. 2. Enter the port number of the emergency agent listening port. The factory default port is 9002. However in some cases it is better to ch[...]

112 en | Additional programs Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 7.2.4 Delete the message from the list 1. Select the message(s) you want to delete. 2. Click the button. The confi rmation window is displayed. Figure 7.6 The confirmation window 3. Click [Yes] to delete the message. 7.3 Archiv e Play er pr[...]

Digital Video Recorder Additional programs | en 113 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 > Exit: Exit the program. - Lang(L): Select the language for Arc hive Play er program. - Help(H) > About Archiv e Player : Displays Archive Pla yer information. • Control Icons - : Pauses playback. - : Starts playback. - : Stops play[...]

114 en | Additional programs Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Figure 7.9 The Archiv e Player window 5. Click the button to stop playback.[...]

Digital Video Recorder Additional programs | en 115 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 7.4 Web View er program 7.4.1 Logging into the Web Viewer 1. Start the web browser. 2. In the Address Box, enter “HTTP://” and the IP Address of the DVR. 3. Press ENTER, then the Web Viewer and the Remote log on menu will be displayed. F[...]

116 en | Additional programs Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 7.4.2 Using the Web Viewer Y ou can control the live image using the W eb Viewer . Figure 7.11 The Web View er window Mode select icon. Click to change the PTZ View mode or Live View mode. Multiscreen selection icons. Live screen display win[...]

Digital Video Recorder Additional programs | en 117 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 7.4.4 PTZ View control • Click the icon to change the PTZ view mode. The PTZ virtual remote control is displayed. Figure 7.12 The PTZ vir tual remot e control window • Use virtual remote control buttons to control the PTZ camera. For mor[...]

118 en | Additional programs Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems[...]

Digital Video Recorder Refer ence | en 119 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 8 REFERENCE 8.1 T roubleshooting Check the f ollowing guide f or the possible cause of a problem bef ore contacting service. Symptoms Resolutions The syst em pow er does not turn on. Check that the po wer cable is connect ed correctly . Check that th[...]

120 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Symptoms Resolutions Audio data recorded with video data is not playing. Check that the audio r ecording option is correctl y set f or the camera you wish t o record audio. Check that the speak er and audio (line input) on the rear of syst em are con[...]

Digital Video Recorder Refer ence | en 121 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Symptoms Resolutions An e-mail sent from this pr oduct was not r eceived. E-mail reception failed wit hout SMTP ser ver setting. • Make sur e the netw ork is correctly set. • Make sur e the mail address is in put correctly . • Check the spam ma[...]

122 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 8.2 Recommended devices 8.2.1 Supported USB Memory list No. Maker Model Name Capacity USB V ersion 1 Sandisk Cruzer Micro 256MB / 512MB / 1GB Ver 2.0 2 Sony Ultra Mini USM 256MB / 512MB / 1GB Ver 2.0 3 T ranscend JF 120 2.0 256MB / 512MB / 1GB Ver 2.[...]

Digital Video Recorder Refer ence | en 123 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 8.2.4 Supported PTZ camera list Prot ocol Name Mak er Pan/ Tilt Zoom F ocus Iris Preset T our Setup BOSCH BOSCH YES YES YES YES YES YES YES PEL CO D PEL CO YES YES YES YES YES YES YES PEL CO P PELCO YES YES YES YES YES YES YES GANZ_DSCP CBC YES YES Y[...]

124 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 8.3 Time zones Timezone name Timezone Abbreviation Timezone DST Eniwet ok , Kwajalein EK -12:00 Midwa y Island, Samoa MIS -11:00 Hawaii HAW -10:00 Alaska ALA -09:00 -08:00 Pacific Time (US and Canada); T ijuana PST -08:00 -07:00 Mountain Time (US and[...]

Digital Video Recorder Refer ence | en 125 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 8.4 F actor y default conf iguration settings Classification Detailed It ems Default Se tting F actor y Default 1st level 2nd le vel 3rd level DVR-16K/ DVR-16L DVR-8K/ DVR-8L Camera Camera Ch Name Camera 1 ~ Camera 16 Camera 1 ~ Camera 8 Ye s Covert [...]

126 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Classification De tailed Items Default Setting F actory Default 1st level 2nd level 3rd le vel DVR-16K/ DVR-16L DVR-8K/ DVR-8L Display OSD Language English Y es Camera name On Y es Camera status On Y es Monitor A Seq. dwell time 2 sec Y es Monitor B [...]

Digital Video Recorder Refer ence | en 127 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Classification Detailed It ems Default Setting F actor y Default 1st level 2nd level 3rd lev el DVR-16K/ DVR-16L DVR-8K/ DVR-8L Syst em Date/Time Date 2007.01.01 No Time 0:00 No Date f ormat YYYY/MM/DD Y es Time format 12 hr Y es Time zone GMT No Day[...]

128 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems 8.5 Recording Time T able (500GB HDD) Resolution (NTSC/P AL) Quality IPS (NTSC/P AL) Recording Time (Hr) Video (NTSC/P AL) Video+Audio (NTSC/P AL) DVR-8K/ DVR-8L DVR-16K/ DVR-16L DVR-8K/ DVR-8L DVR-16K/ DVR-16L 352x240/ 352x288 Lowest 30/25 550/440 2[...]

Digital Video Recorder Refer ence | en 129 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Resolution (NTSC/P AL) Quality IPS (NTSC/P AL) Recording Time (Hr) Video (NTSC/P AL) Video+Audio (NTSC/P AL) DVR-8K/ DVR-8L DVR-16K/ DVR-16L DVR-8K/ DVR-8L DVR-16K/ DVR-16L 704x240/ 704x288 Lowest 15/15 642/514 321/257 576/461 288/231 7.5/7.5 906/725[...]

130 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Resolution (NTSC/P AL) Quality IPS (NTSC/P AL) Recording Time (Hr) Video (NTSC/P AL) Video+Audio (NTSC/P AL) DVR-8K/ DVR-8L DVR-16K/ DVR-16L DVR-8K/ DVR-8L DVR-16K/ DVR-16L 704x480/ 704x576 High 7.5/7.5 220/176 110/88 212/169 106/85 5/5 263/211 132/1[...]

Digital Video Recorder Refer ence | en 131 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 Resolution (NTSC/P AL) Quality IPS (NTSC/P AL) Recording Time (Hr) Video (NTSC/P AL) Video+Audio (NTSC/P AL) DVR-8K/ DVR-8L DVR-16K/ DVR-16L DVR-8K/ DVR-8L DVR-16K/ DVR-16L 352x240/ 352x288 High 30/25 77/62 39/31 74/59 37/30 20/20 89/71 44/36 85/68 4[...]

132 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Resolution (NTSC/P AL) Quality IPS (NTSC/P AL) Recording Time (Hr) Video (NTSC/P AL) Video+Audio (NTSC/P AL) DVR-8K/ DVR-8L DVR-16K/ DVR-16L DVR-8K/ DVR-8L DVR-16K/ DVR-16L 704x480/ 704x576 Lowest 7.5/7.5 137/110 68/55 127/102 64/51 5/5 177/141 88/71[...]

Digital Video Recorder Refer ence | en 133 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12 8.7 Specifications Model DVR-8K/D VR-8L DVR-16K/DVR-16L Video Input 81 6 Composit e video 0.5-2Vpp, 75 ohm, automatic t ermination. Output Loop Through 81 6 Mon A (CVBS) 11 1.0Vpp±0.1V , 75 Ω Mon A (VGA) 11 Analog RGB 800x600 Mon B (CVBS) 11 1.0Vpp[...]

134 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems Model DVR-8K/D VR-8L DVR-16K/DVR-16L Po wer 100~240V AC, 50/60Hz Po wer consumption Max. 80 W (with 1x HDD) / Max. 120 W (with 4x HDD) Dimension (WxDxH) 430 x 425 x 88 mm / 16.9 x 16.7 x 3.5 inch Net Weight (wit h 4x HDD) 9 Kg / 19.8lbs Operation T e[...]

Digital Video Recorder Refer ence | en 135 Bosch Security Syst ems User Manual F01U | 2.0 | 2008.12[...]

136 en | Refer ence Digital Video Recorder F01U | 2.0 | 2008.12 User Manual Bosch Security Syst ems[...]

[...]

Bosch Security Systems www.boschsecurity.com © Bosch Security Systems, 2008 F01U | 2.0 | 2008.12 P/N: MFL????????[...]