Bosch WAE24367UK manuale d’uso

en Instruction Manual and Installation Instructions Washing machine WAE24367UK ...[...]

2 Y our new washing machine You have chosen a Bosch washing machine. Please take a few minutes to read and become familiar with the advantages of your washing machine. To meet the high quality demands required by Bosch, every washing machine that leaves our factory is carefully checked to ensure that it functions correctly and is in perfect conditi[...]

en 3 Contents enInstruction Manual and Installation Instructions 8 Intended use . . . . . . . . . . . . . . . . . 4 ( Safety instructions . . . . . . . . . . .5 Electrical safety . . . . . . . . . . . . . . . . . . 5 Risk of injury . . . . . . . . . . . . . . . . . . . . 5 Safety for children . . . . . . . . . . . . . . . . 5 7 Environmental pro te[...]

en Intended use 4 4 After-sales service . . . . . . . . . . 26 [ Consumption rates . . . . . . . . . . 27 Energy and water consumption, programme duration and residual moisture for the main washing programmes . . . . . . . . . . . . . . . . . . 27 Efficiency test programmes for cotton fabrics . . . . . . . . . . . . . . . . . . 28 J T echnical data[...]

Safety instructions en 5 ( Safety instructions S a f e t y i n s t r u c t i o n s Electrical safety : Warning Risk of death! There is a risk of electric shock if you touch live components. ■ Never touch or hold the mains plug with wet hands. ■ Only pull out the mains cable by the plug and never by the cable, as this could damage it. Risk of in[...]

en Environmental protection 6 ■ Cut through the mains cable and remove it, along with the plug. ■ Destroy the lock on the washing machine door. : Warning Risk of suffocation! Children may become wrapped in packaging/film or packing parts if allowed to play with them, or they may pull them over their heads and suffocate. Keep packaging, film and[...]

Main points in brief en 7 Y Main points in brief M a i n p o i n t s i n b r i e f -------- -------- -------- -------- 1 @ @ @ Connect the mains plug. Turn on the water tap (for models without Aqua-Stop). Sort the laundry. Open the washing machine door. 2 @ @ @ @ Select a programme, e.g. Cottons . Load the laundry. Do not trap any items of laundry.[...]

en Getting to know the appliance 8 * Getting to know the appliance G e t t i n g t o k n o w t h e a p p l i a n c e W ashing machine     # 6 7 ( Detergent drawer ~ Page 17 8 Washing machine door with door handle 0 Controls/display elements 9S Open the washing machine door 9T Close the washing machine door @ Service flap[...]

Getting to know the appliance en 9 Control panel Displa y panel +   # 3 ( G Speed*, F Eco*, p Reduced Ironing, O Rinse Plus/ Z W ater Plus (Aqua Plus)* additional programme settings (* depending on the model) @ Display panel for settings and information Overview of all additional programme settings H A Start/Reload for starting, interrupti[...]

en Laundry 10 Z Laundr y L a u n d r y Sorting laundr y Sort your laundry according to the care instructions and manufacturer's information on the care labels, depending on: ■ Type of fabric/fibre ■ Colour Note: Laundry can discolour or not be cleaned correctly. Wash white and coloured laundry separately. Wash new bright fabrics separately[...]

Detergent en 11 C Detergent D e t e r g e n t Correct selection of detergent The care label is crucial for selecting the correct detergent, temperature and treatment of the laundry. ~ See also www.sartex.ch Visit www.cleanright.eu to find further information on detergents, care products and cleaning agents for domestic use. ■ Standard detergent w[...]

en Overview of programmes 12 / Overview of programmes O v e r v i e w o f p r o g r a m m e s Programmes on the programme selector Programme/type of laundry/information Settings Name of the programme Brief explanation of the programme and for which fabrics it is suita- ble. Max. load; * Reduced load for the G Speed setting Temperature that can be s[...]

Overview of programmes en 13 Starching Note: Laundry must not be treated with fabric softener. Starching is possible in all wash programmes if liquid starch is used. Measure starch into compartment M in accordance with the manufacturer's instructions (clean first if necessary). Dyeing/bleaching Dye should only be used in normal household quant[...]

en Programme default settings 14 0 Programme default settings P r o g r a m m e d e f a u l t s e t t i n g s The spin speed and programme duration ("Ready in" time) for all programmes are preset at the factory. These are displayed in the display panel after selecting the programme. You can change the default settings as follows. 0 Spin s[...]

Additional programme settings en 15 Additional programme settings A d d i t i o n a l p r o g r a m m e s e t t i n g s G Speed* For washing in a shorter time with a washing result comparable to that of the standard programme. Note: Do not exceed the maximum load. Overview of programmes ~ Page 12 F Eco* For saving energy with a washing result com[...]

en Operating the appliance 16 Change the programme default settings You can use the default settings or change them. To do this, repeatedly press the corresponding button until the required setting is displayed. Note: All buttons are sensitive and only need to be touched lightly. If the buttons are held for longer, the appliance automatically runs [...]

Operating the appliance en 17 Measure and add detergent and care products Caution! Damage to the appliance Cleaning agents and agents for pretreating laundry (e.g. stain removers, prewash sprays, etc.) may cause damage if they come into contact with the surfaces of the washing machine. Do not allow these agents to come into contact with the surface[...]

en Operating the appliance 18 For models without a measuring aid , pour the liquid detergent into the appropriate dispenser and place it in the drum. Star t the programme Select the Start /Reload button. The indicator lamp lights up and the programme starts. During the programme, the display panel shows the "Finished in" time or, after st[...]

Sensors en 19 Cancel the programme For programmes at high temperatures: 1. To cool the laundry, select Rinse / Spin. 2. Press the Start /Reload button. For programmes at low temperatures: 1. Press Start/ Reload . 2. Select Rinse / Spin (deactivate the Rinse plus/W ater plus button) or select Drain . 3. Press the Start /Reload button. Programme end [...]

en Setting the signal 20 M Setting the signal S e t t i n g t h e s i g n a l 2 Cleaning and maintenance C l e a n i n g a n d m a i n t e n a n c e : Warning Risk of death! There is a risk of electric shock if you touch live components. Switch off the appliance and unplug the mains plug. : Warning Risk of poisoning! Toxic vapours can be produced b[...]

Cleaning and maintenance en 21 ■ Cleaning with a jet of water is prohibited. Drum Wipe the inside of the rubber seal dry with a cloth. Leave the washing machine door open in order that the drum can dry. Use chlorine-free cleaning agents and not steel wool. Descaling Note: Make sure that there is no laundry in the machine. Descaling should not be [...]

en Cleaning and maintenance 22 5. For models without a drain hose: Carefully unscrew the pump cover until the detergent solution begins to flow out. When the service flap is half full, close the pump cover and drain the service flap. Repeat the above steps until all the detergent solution has completely drained out. 6. Carefully unscrew the pump co[...]

Faults and what to do about them. en 23 6. For standard and Aqua-Secure models, clean the filter on the rear of the appliance: Remove the hose from the rear of the appliance. Remove the filter using pliers and clean the filter. 7. Connect the hose and check for leaks. 3 Faults and what t o do about them. F a u l t s a n d w h a t t o d o a b o u t [...]

en Faults and what to do about them. 24 Information on the displa y panel Faults and what t o do about them. Display Cause/remedial action YES The washing machine door is unlocked. It is possible to add laundry. NO ■ Temperature too high. Wait until the temperature drops. ■ Water level too high. Not possible to add laundry. Close the washing ma[...]

Faults and what to do about them. en 25 Spin result not satisfac- tory. Laundry wet/too damp. ■ Not a fault – the unbalanced load detection system has interrupted the spin because the laundry is unevenly distributed. Distribute small and large items of washing in the drum. ■ Reduced Ironing selected? ■ Selected speed too low? Spin cycle sta[...]

en After-sales service 26 4 Af ter -sales ser vice A f t e r - s a l e s s e r v i c e If you cannot rectify a fault yourself (Faults and what to do about them ~ Page 24 ), please contact our after-sales service. ~ Cover page We will always find an appropriate solution in order to avoid unnecessary visits by engineers. Please give the after-sales s[...]

Consumption rates en 27 [ Consumption rates C o n s u m p t i o n r a t e s Energy and water consumption, programme duration and residual moisture for the main washing programmes Programme Load Energy consumption* Water* Programme duration* Cottons 20 °C 7 kg 0,31 kWh 72 l 2 ¾ h Cottons 40 °C 7 kg 0,85 kWh 72 l 2 ¾ h Cottons 60 °C 7 kg 1,21 kW[...]

en Technical data 28 Ef ficiency test programmes for co tton fabrics The following programmes (standard programmes, indicated by ü ) are suitable for cleaning normally soiled cotton fabrics and are the most efficient with respect to combined energy and water consumption. J T echnical data T e c h n i c a l d a t a Dimensions: 850 x 600 x 590 mm (h[...]

Positioning and connecting en 29 5 Positioning and connecting P o s i t i o n i n g a n d c o n n e c t i n g Included with the appliance Not es ■ Check the machine for transport damage. Never use a damaged machine. If you have a complaint, please contact the retailer from whom you purchased the appliance, or our after-sales service. ■ Moisture[...]

en Positioning and connecting 30 Caution! Water damage The connection points for the water supply hose and water drain hose are under high water pressure. To prevent leaks and water damage, you must follow the instructions in this section. Not es ■ In addition to the safety information listed here, the local water and electricity supplier may hav[...]

Positioning and connecting en 31 1. Take the hoses out of the holders. 2. Unscrew and remove all four transport brace screws. Remove the sleeves. To do this, remove the mains cable from the holders. 3. Fit the covers. Lock the covers firmly in place by applying pressure to the snap-in hooks. Hose and cable lengths ■ Left-hand connection ■ Right[...]

en Positioning and connecting 32 W ater inlet : Warning Risk of death! There is a risk of electric shock if you touch live components. Do not immerse the Aqua-Stop safety valve in water (it contains an electric valve). Observe the following when connecting the machine: Not es ■ Only operate the washing machine using cold mains water. ■ Do not c[...]

Positioning and connecting en 33 ■ Height difference between the installation surface and the drain: Min. 60 cm, max. 100 cm You can lay the water drain hose as follows: ■ Drainage into a washbasin : Warning Risk of scalding! When you are washing at high temperatures, there is a risk of scalding if you come into contact with hot detergent solut[...]

en Positioning and connecting 34 Electrical connection : Warning Risk of death! There is a risk of electric shock if you touch live components. ■ Never touch or hold the mains plug with wet hands. ■ Only pull out the mains cable by the plug and never by the cable, as this could damage it. ■ Never unplug the mains plug during operation. Observ[...]

Positioning and connecting en 35 T ranspor tation E.g. when moving house Preparatory work: 1. Turn off the water tap. 2. Reduce the water pressure in the supply hose. Maintenance – filter in the water supply ~ Page 22 3. Drain the remaining detergent solution. Maintenance – detergent solution pump blocked ~ Page 21 4. Disconnect the washing mac[...]

Robert Bosch, Hausgeräte GmbH Carl-Wery-Straße 34 81739 München DEUTSCHLAND *9001026001* 9001026001 (9407) Aqua-Stop warranty Only for appliances with Aqua-Stop In addition to warranty claims against the vendor based on the purchase agreement and to our appliance warranty, we will provide compensation under the following conditions: 1. If water [...]