Brickcom FB-130NP manuale d’uso

0 Hardware User ’ s Manual Megapixel Day & Night Fixed Bo x Network Camera Quality Service Grou p Fixed Box Series[...]

1 Review Histor y: 1. Sep arate User Manual into HW and SW . 2. Merge FB-100Ap/FB-100Ae/FB-130Np Series into this User Manual. 3 . Merge FocusEasy™ version Product name: Network Camera (Fixed Box series) Release Date: 20 13/07 Manual Revi sion: V4 .0 Web site: www .brickcom.com Email: support@brickcom .com info@brick com.com © 20 13 Brickcom Cor[...]

2 T able of Conte nt s Before Y ou Use This Product ..................................................................... 3 Regulatory Information ............................................................................ 4 Chapter 1- Package Content s .................................................................... 5 Chapter 2- Fixed Box Net[...]

3 Before Y ou Use This Pro duct In many co untries, there a re laws prohibitin g or restricting th e use of surveillance devices. This Network Camera is a high-performance, web-ready camera which can be part of a flexible surveillance system. It is us er ’s responsibility to ensure that the operation of this camera is legal before installing this[...]

4 Regulatory Information Federal Commu nication Commission I nterference State ment This e quipment ha s been tested and found to co mply w ith the l imits for a C lass B di gital dev ice, pursuant to Pa rt 15 o f the FCC Rules. These limit s are desi gned to provi de reasonable protection against harmf ul interference in a residential installation[...]

5 Chapter 1- Package Content s Please check to make sure that the product package contains all the acce sso ries listed below . a. Network Cam era b. CS mount Lens (Option al ) c. Product CD d. Camera S tand e. Warranty C ard f. Allen Key g. Power Adapter (Op tional) h. Easy Installation Gui de i. Detachabl e Antenna (Optional)[...]

6 Chapter 2- Fixed Box Netw ork Camera Overview The Brickcom Fixed B ox se ries offers a reliable and ef ficient solution for 24 -hour video surveillance. The F ixed Box series offers h ighly efficient H.264 v ideo c ompression, which reduces bandwidth and storag e require ments w ithout compromising image quality . M-JPEG and MPEG-4 are also suppo[...]

7 Chapter 3-L ED Indicators Function Front LED Behavior Description Remark WPS WPS in process Right ( Blue) Steady WPS Successfully Connected FocusEasy ™ (V2 Series o nly) Steady Lens focusing in process Right (red) St atus Hardware failure Left (Green) S teady Normal Operation Unlit Power Of f While F/W upgrading Function Rear LED Behav ior Desc[...]

8 Chapter 4- Device Ap pearance Description NOT E 1. The W PS buttons must f irst be enabled through the web GU I in o rder to work. See W PS page for details on how to enable the W PS Button. 2. (*) Th ese are optional f eatures. Please r efer to the Produ ct List fo r the fu ll list of optional features available for the product. CS Mount Lens -O[...]

9 <V ari-focal Lens with A uto Iris > (DC Drive ) --- CS Mount Extension I/O T erminal Block The Network Camera provides an extension I/O ter minal block which is used to connect the camera with external input/output devices. The pin definitions are listed as below . DI/DO Diagram Pin Function 1 Power + 5V 2 Digital Output 3 Digital Input 4 G[...]

10 Hardware Reset The Reset B utton can be used to r eboot the camera or restore it to factory default se ttings. If the camera e xperiences a p roblem, r ebooting the camera may correct the problem. If the problem remains, please restore the camera to factory d efault settings and reinstall the software. T o Reboot - Press a nd h old the Reset But[...]

11 Chapter 5- Inst allation 5.1 Hardware Instal lation Mounting the CS-Mount Lens to the Camera <V ari-focal Lens with Manual Iris> --- Optional Lens 1. Connect the CS-mount lens to the IP ca mera by turning it clockwise. 2. If necessary , ad just the iris controller , focu s controller , and zoom controller to get the best image condition. T[...]

12 3. Once the image is focused , the buzzer will make a long beep for 3 seconds for notification. <V ari-focal Lens with A uto Iris> --- Optional Lens 1. Connect the CS-mount lens to the camera by turning it clockwise 2. Plug the lens cable in the side camera connector . 3. If necessary , adjust focus controller , and zo om controller to get[...]

13 5.2 Minimum System Requirement s CPU Pentium 4 3GHz RAM 1024 MB Web Brow ser Microsoft Internet Explorer 8 .0 Operation System Microsoft Windows XP Network Interface 10/100Mbps Network interface card[...]

14 5.3 Camera Connection Note: If there is no DHCP server on the network, the camera will ope rate with the IP address 192.168.1.245. Please make sure your computer's network interface is configured to the same subnet as the camera. Connection to Non-PoE (Power over Ethernet) S witch or Router 1) Power the camera by plug ging the power adaptor[...]

15 Connection to P oE Switch or Router or Injector A. PoE Switch or Router: 1) Connect the camera to the PoE switch or router with the RJ - 45 Ethernet cable. B. PoE injector: 1) Con nect the camera to the OUT port ("DA T A+Power" port, etc.) of the PoE injector with the RJ - 45 Ethernet cable. 2) Con nect the IN port ("DA T A" [...]

16 Sof tware Installation In this manual, "User" ref ers to whoever has access to the Network Came ra, and "Administrator" refers to the p erson who can conf igure the camera and grant user to access the camera. After che cking the hardware connection, run the Installation W izard p rogram included on the p roduct’ s CD -ROM t[...]

17 In the Install Shield W iz ard dialog box, click <Next> to continue. Read the End- User License Agreement an d check the option “I accept the terms of the license agreement”. Click <Next> to continue.[...]

18 Select either “Complete” setup or “Custom” to inst all the system.  COMPLETE SETUP (Recommended) Check the option “ Complete ” and then click <Next>. Click <Change > to change the appointed folder to install . Click <Next> to continue.[...]

19 Shortcut options selection. Click <Next> to continue. T he installation information will be displayed. Click <Next> to continue.[...]

20 To launch EasyConfig or PC-NVR Standard, select the application and click <Finish>. W hen la unching the PC-NVR program, please refer to the PC -NVR user manual.  CUSTOM SETUP This op tion is recommended for a dvanced users. It c an be used to install the sy stem t o a preferred directory or to select specific program feature(s). Check [...]

21 Select the features to install. Click <Next> to continue.[...]

22 Click <Change> to change the appointed folder to in stall. Click <Next> to continue. Select programs to create shortcuts. Click <Next> to continue.[...]

23 The installation information will be displayed. Click <Nex t> to continue. T o launch Easy Config o r PC-NVR S tandard , se lect the appli cation and click <Finish>. W hen launching the PC-NVR program, pl ease refer to the PC-NVR user manual .[...]

24 EasyConfig T o launch EasyConfig, select EasyConfig from the start menu. If Complete Setup type was used in the software installation, an Ea syConfig icon was installed on the desktop. Double click to open the icon. If Custom Setup type was used in the software installation and an EasyConfig icon was not inst alled on the desktop, the program wi[...]

25[...]

26 Select either “Simple Mode” or “Professional Mode” to obt ain the camera’s IP settings. If “Simple Mode” is selected, EasyConfig will se t up the conne ction au tomatically . On the other hand, user can al so configure IP address manually by selecting “Professional Mode”[...]

27 There may be m any cameras in the local network. Differentiate the cameras using their UPnP name. Double cl ick on the camera from the su rvey list to connect. For configuring the IP address settings, select either <Settings rema in the same>, <Automatically obtain an IP Address (DHCP) (Recommended option)> or < Set IP Address con[...]

28 If <Set IP Address configuration manually> is select ed, the following pages will be displayed.[...]

29 If the camera support s the EasyLink ™ func tion , th e f ollowing page w ill be displayed. Otherwise, this page will not be sho wn. User can also simply skip this step by clicking on “Skip.” EasyLink ™ is a unique Brickcom f unction which allows users to assign a unique EasyLink ™ name to their network camera’s IP address. There is [...]

30 If “ DHCP IP address settings” was selected, the failure page will be displa yed as below: If “S tat ic IP address settings” was selected, the failure page will b e displa yed as be low:[...]

31 If the connection was successful, the user will see the message: “Congra tulations. The install ation of th e camera is complete. ” When this window is display ed, c lick < PC -NVR> to start the PC-NVR program, <Liv e View> to vi ew the liv e video from the connected IP camera, or <X> in the top right corner of the screen t[...]