Brinkmann 2610 Series manuale d’uso

OFF HIGH LOW OFF HIGH LOW OFF HIGH LOW OFF HIGH LOW MAXIMUM SIDE BURNER LOAD = 15 lbs. 1. Read and follow all warnings and instructions in owner’s manual before lighting. 2. Open lid before lighting burner. 3. Make sure all control knobs are in the OFF position. 4. Select the burner to be lit. Push and turn the control knob of that burner to HIGH[...]

WE W ANT Y OU T O ASSEMBLE AND USE Y OUR GRILL AS SAFEL Y AS POSSIBLE. THE PURPOSE OF THIS SAFETY ALERT SYMBOL IS T O A TTRA CT Y OUR A TTENTION T O POSSIBLE HAZARDS AS Y OU ASSEMBLE AND USE Y OUR GRILL. WHEN Y OU SEE THE SAFETY ALER T SYMBOL P A Y CLOSE A TTENTION T O THE INFORMA TION WHICH FOLLO WS! READ ALL SAFETY W ARNINGS AND INSTR UCTIONS CAR[...]

2 W ARNING • Never use natural gas in a unit designed f or liquid propane gas. • Never use c harcoal briquets or lighter fluid in a gas grill. • Leak test all connections before fir st use, e ven if grill was pur c hased full y assemb led and after each tank refill. • Never c heck for leaks using a matc h or open flame . CA UTION! Str ong o[...]

CYLINDER SPECIFICA TIONS: When purchasing or e xchanging a cylinder for y our gas grill, it must be constr ucted and marked in accordance with the specifications f or LP gas cylinders of the U.S . Depar tment of T ranspor tation (DO T) or the National Standard of Canada, CAN/CSA-B339 as applicable with a listed o ver-filling pre vention de vice (OP[...]

4 The cylinder must also be equipped with: • A shut-off v alve terminating in a T ype 1 gas cylinder valv e outlet. • A T ype 1 v alve that pre vents gas flo w until a positive seal is obtained. • An arrangement f or vapor withdr awal. • A collar to protect the cylinder shut-off v alve. • A saf ety relief device ha ving direct communicati[...]

W ARNING FILLING THE LP GAS CYLINDER: • Allow onl y qualified LP gas dealers to properl y fill or repair your LP gas cylinder . • New tanks should be pur g ed prior to filling; inform LP gas dealer if y ou are using a new tank. • DO NO T allow the cylinder to be filled be yond 80% capacity . Over-filled tanks can create a dangerous condition.[...]

6 W ARNING • Never use y our grill without leak testing all gas connections and hoses. See the section on "Leak T esting" in this manual for pr oper procedures. The pressure regulator and hose assembl y supplied with your gas grill is designed to work with an LP gas supply c ylinder . • DO NO T attempt to connect it to any other fuel [...]

LEAK TESTING: T o prevent fire or explosion hazar d: • DO NO T smoke or permit ignition sources in the area while conducting a leak test. • P erform test OUTDOORS only in a well ventilated area. • Never perf orm a leak test with a match or open flame. • Never perf orm a leak test while the grill is in use or while grill is still hot. WHEN T[...]

W ARNING 8 6. Check each place listed (A -K) f or growing b ubbles which indicates a leak. 7. T ur n OFF gas supply at cylinder valv e. 8. T ur n on control knobs to release gas pressure in hose. 9. T ur n control knobs to OFF position. 10. Tighten any leaking connections. 11. Repeat soapy water test until no leaks are detected. DO NOT use the gril[...]

LIGHTING INSTR UCTIONS: Follow the instructions e xactly . 1. OPEN THE GRILL LID before attempting to light a b urner so that fumes do not accumulate inside the grill. An explosion could occur if grill lid is down. 2. Check that all b urner control knobs and the cylinder v alve are turned to the OFF position. 3. T urn on the fuel supply b y rotatin[...]

LIGHTING THE SIDE BURNER: 1. Open lid to the side bur ner before lighting. 2. T ur n on the side burner by pressing in and rotating the control knob to the HIGH position. 3. Press and hold the igniter button on the main control panel f or 3-5 seconds until the burner ignites. 4. If b ur ner does not ignite immediately , tur n the b ur ner control k[...]

11 OPERA TING THE GRILL: Never use Char coal or Lighter Fluid inside your Gas Grill. Read and follo w all warnings and instructions contained in the preceding sections of this manual. BREAKING IN Y OUR GRILL: • In manuf acturing and preser ving the components of your grill, oil residue ma y be present on the burner and cooking surf aces of your g[...]

R O TISSERIE COOKING: • Y our grill was pre-drilled from factory to include mounting holes for a Brinkmann rotisserie (sold separately). Do not use a rotisserie not specifically manuf actured for this g r ill. • Read and f ollow all instructions provided with the rotisserie. Sav e instructions for future ref erence. • Do not use the side burn[...]

TRANSPOR TING AND ST ORA GE: • Never mo ve a grill when it is hot or when objects are on the cooking surfaces. • Make sure that cylinder v alve is shut off. After moving the grill chec k that all gas connections are free of leaks. Refer to instructions for leak test on pa g e 7 of this manual. • DO NO T store a spare LP gas cylinder (filled o[...]

CLEANING AND MAINTENANCE: • F or safe grilling and peak perf or mance of your g r ill, perf or m these checks at least twice per y ear or after e xtended per iods of storage . HARD W ARE • Be sure to tighten up all hardware (n uts, bolts, scre ws, etc.) at least twice per year . CASTINGS • Remov e the cooking grills, heat shields, and b ur ne[...]

TR OUBLE SHOO TING: Prob lem: P ossible Causes: • Burner will not light 1. Chec k LP cylinder fuel lev el. 2. Bad electrode spark. Check to see if the g r ill will “ match light. ” (See Page 9) Electrode or collector ma y need adjustment. 3. Burner may not be properly seated. 4. Burner may be obstructed. 5. The cylinder v alve ma y be closed.[...]

16 • T o protect your g r ill from excessiv e r ust, the unit must be kept clean and co vered at all times when not in use. A grill cov er may be ordered directly from Brinkmann by calling 1-800-468-5252 or 1-800-527-0717. • W ash cooking grills and heat shields with hot, soapy w ater , r inse well and dry . Lightly coat cooking grill with v eg[...]

ASSEMBL Y INSTRUCTIONS READ ALL SAFETY W ARNINGS & ASSEMBL Y INSTRUCTIONS CAREFULL Y BEFORE ASSEMBLING OR OPERA TING Y OUR GRILL. WE RECOMMEND TWO PEOPLE W ORK T OGETHER WHEN ASSEMBLING THIS UNIT . The f ollowing provided tools are required to assemb le this Brinkmann Pro Ser ies 2610 Gr ill: • Flathead Screwdriver • Hex Nut Wrench 17 1 Ele[...]

(Proof of purchase will be required.) Inspect contents of the bo x to ensure all par ts are included and undamaged. 1 FOR MISSING P ARTS, PLEASE CALL CUST OMER SER VICE A T 1-800-527-0717. 18 2 3 4 5 6 7 8 9 10 24 11 13 12 14 15 16 17 18 19 20 21 22 23 27 25 26 28 15 29 30 31 32 33 34 35 36 37[...]

19 8 M6 X 12mm bolts 8 M6 X 20mm bolts 14 M6 X 60mm bolts 1 AA /1.5V Alkaline batter y P AR TS CARD CONTENTS Make sure y ou hav e all items listed under P ARTS LIST and P ARTS B A G CONTENTS bef ore you begin the installation process . Y our P ar ts Bag will include: M6 X 12mm bolts M6 X 20mm bolts M6 X 60mm bolts AA /1.5V Alkaline batter y Screwdr[...]

Choose a good, cleared assembly area and get a friend to help you put your g r ill together . La y cardboard down to protect g r ill finish and assembly area. Step 1 Assemble bottom cart panel and right side car t panel assembly by using f our M6 X 60mm bolts (hand tighten only at this point). Step 2 Assemble bottom cart panel and left side car t p[...]

Note: With the help of a friend, turn the cart over , try to minimize the stress to the side panels. Step 3 Attach locking casters to the bottom of the car t. Tighten caster bolts securely using he x nut wrench provided in par ts pac k. Note: With the help of a friend, turn the cart to its upright position. Step 4 Attach back c ar t panel by using [...]

22 Step 5 Place tank tra y assembly o ver v ent holes in bottom car t panel and secure using f our M6 X 12mm bolts. T ank tra y should slide in and out of car t freely . Step 6 Install door brac ket using the f our #10 X 1/2 ” self taping screws . Mak e sure door stop is set tow ard back of car t. Wing Bolt Center Cut-out T ank T ra y Assembly Do[...]

23 Step 7 Inser t right side door , placing lower piv ot into the pivot hole on bottom car t panel, then align door with car t frame . Depress spring pin located on top edge of door and slide door tow ard side car t panel until spr ing pin locks into hole in door br ack et. Repeat f or other door . Step 8 Attach the grease tra y brac ket onto the b[...]

Note: When performing Step 9, Lift grill body fr om front and rear panels to av oid injury to hands and fingers. Step 9 With the help of a friend, place grill body assembly on g r ill car t. Gr ill body will rest between upper side sections of car t. Align front edge of grill body assembly with front edges of car t frame legs. Secure using f our M6[...]

25 Step 10 Attach side burner assembly to g r ill body assembly b y inser ting four M6 X 20mm bolts through the holes in the side burner assembly and into holes of grill body assembly . Tighten all four bolts . Install side burner grate and control knob . Step 11 Remov e the plastic cap on gas supply manif old and attach r ubber gas hose to gas sup[...]

Step 13 Attach side table/ice b uck et assembly to g r ill body assemb ly by inser ting f our M6 X 20mm bolts through the holes in the side table/ice b uck et assembly and into holes of grill body assembly . Tighten all f our bolts. Step 14 Inser t tool dra wer into front opening under control panel by dropping roller wheels into side channels. W a[...]

Step 15 Inser t grill bottom into opening on backside of g r ill. Make sure to slide tra y onto trac ks as illustrated. Step 16 Slide grease tra y into grease tr ay brac ket located under grill bottom on backside of g r ill. Step 17 Hang stainless steel buc ket in cut- out of left side table/ice b uck et assembly . Step 18 Place ice buc ket insulat[...]

28 Step 19 Place the stainless steel heat shields on low er lev el of grill body assembly directly abo ve b ur ners. Step 20 Place stainless steel cooking grills on suppor t ribs directly above stainless steel heat shields. Step 21 Place warming rack in slots abo ve cast iron cooking grills. W ar ming Rack Cooking Grills Stainless Steel Heat Shield[...]

PROFESSIONAL SHISH-KABOB SKEWERS These heavy-duty , 18" shish-kabob skew ers are extra-long f or fab ulous restaurant style kabobs. Made of rust resistant stainless steel to last f or years. SET OF 12 812-2904-0 ACCESSORIES 29 RIB RA CK Chrome-plated rac k can greatly increase the cooking capacity of your g r ill. Holds r ibs, chic ken halves [...]

ACCESSORIES LOOK FOR THESE AND O THER BRINKMANN A CCESSORIES A T Y OUR LOCAL RET AILER WHERE SMOKERS ARE SOLD , OR ORDER DIRECT BY CALLING 1-800-468-5252. THE UL TIMA TE 5-PIECE BBQ TOOL SET Yo u ’ ll be the envy of y our fello w outdoor chefs with this ultimate BBQ tool set. It ’ s sleek ergonomic design combined with durab le, heavy- gauge st[...]

140-2610-1 8/02, 12/03 W ARRANTY ©2002 The Brinkmann Cor poration Dallas, T e xas 75244 U .S.A www .brinkmanncor p .com The Brinkmann Cor poration warr ants to the or iginal purchaser that the Brinkmann Stainless Steel Pro Series 2610 TM is free from def ects due to workmanship or mater ials f or : Stainless steel and die cast par ts - Lif etime E[...]