Caliber RCD264 manuale d’uso

[...]

Page CONTENTS 01 Contents 02 Installation 04 Using the detachable front panel 05 Wiring iagram 06 Operations 06 07 General perations 0 Radio perations CD/MP3 perations 1 Mixed- CD perations 1 USB perations 13 SD/MMC ard perations 13 AUX in perations 1 Disc otes 1 T rouble hooting 1 Specifications d Location and function of controls o 9o 10 RDS (Rad[...]

Notes: - Choose the mounting location where the unit will not interfere with the normal driving function of the driver . - Before finally installing the unit, connect the wiring temporarily and make sure it is all connected up properly and the unit and the system work properly . - Use only the parts included with the unit to ensure proper installat[...]

7. Reconnect the wire harness and the antenna and be careful not to pinch any wires or cables. 8. Slide the unit into the sleeve until it locks into place. 9. T o further secure the unit, use the supplied metal strap to secure the back of the unit in place. Use the supplied hardware (Hex Nut (M5mm) and Spring Washer) to attach one end of the strap [...]

If your vehicle is a Nissan, T oyota, follow this mounting instruction. Use the screw holes marked T (T oyota), N (Nissan) located on both sides of the unit to fasten the unit to the factory radio mounting brackets supplied with your vehicle. Fasten the unit to the factory radio mounting brackets. Align the screw holes on the bracket with the screw[...]

Wiring diagram L R 15 ISO CONNECT OR ISO connector: Part A: A1: A2: A3: A4: A5: A6: A7: A8: Part B: B1: B2: B3: B4: B5: B6: B7: B8: No Connect No Connect No Connect Battery B+ (Y ellow) Antenna (Blue) No Connect Accessory (Red) Ground B- (Black) Rear Right + (Violet) Rear Right - (Violet/Black) Front Right + (Gray) Front Right - (Gray/Black) Front [...]

Operations Location and function of controls Front panel: 27 28 (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (1 1) (12) (13) Power on/off Button ( ), Mute Button V olume Control, Audio/Menu Selector (SEL) Preset Equalizer (EQ) Button LCD display MODE Button Open ( ) Button DOWN ( ) Button Tune down, Seek down, previous track, fast reverse UP ( ) Button[...]

Reset the unit Power on/off 1.T urn off the unit power . 2. () - Rotate the volume control to adjust volume level. - Press the button short and repeatedly to select the volume, bass, treble, balance and fader. - Rotate the volume control to adjust level of the selected sound mode: - VOL:00,01 ~ 44,45 -B A S/T R E :- 7 ,- 6~ , 0 ,~+ 6 , + 7 , - BAL:[...]

“RETUNE L or RETUNE S” RETUNE L mode: - RETUNE S mode: “MASK DPI or MASK ALL”: - MASK DPI mode: MASK ALL mode: (long/short retune): This function allows you to set the duration after which the automatic search for traffic information or a station with an identical PI should be carried out. - The automatic search will take place after 90 sec[...]

CT -> FREQUENCY -> PTY NONE-> In CDP/USB/SD mode: CT -> FREQUENCY -> PTY NONE -> T rack or file number and Running time The selected information is displayed for 5 seconds, then the radio goes back to the first display mode after 5 seconds. - T o view the current time Press the button, the current time will be shown on the LCD dis[...]

Short pressing the button, the radio searches for each preset station that saved in the memories of the current band. If the field strength level is more than the threshold level, the radio will hold at this preset station for 5 seconds with sound output, then go to next station, finally the radio will play at the preset station where scanning star[...]

Listening to Traffic Announcement The RDS data are the PI, PS, TP , PTY , T A and AF data. PI PS PTY TP TA AF (Program identification): Code for identifying the radio station. (Program service): Name of the radio station. (Program type): T ype of program such as news, Pop music, sports etc. (T raffic program): Code indicating a station broadcasting[...]

Repeat playback Shuffle playback Select the track or file for playback in MP3 or WMA format In CD or MP3/WMA file playback, briefly press the button to Press again to stop repeat playback and resume normal playback. In CD or MP3/WMA file playback, briefly press the button to Y ou can access 3 different types of track search modes for MP3/WMA format[...]

The unit is equipped with a USB port on the front panel of the unit, you can connect a USB stick through the USB port. When you insert a USB stick through the port, the unit will search the MP3 files and start to play it automatically . If insert a disc into the disc slot while read the file in the USB device, the unit will playing the disc first. [...]

- Do not warp discs. - A disc should always be kept in its case when not in use to prevent from damage. - Do not place discs in the following places: 1. Direct sunlight. 2. Dirty , dusty and damp areas. 3. Near car heaters. 4. On the seats or dashboard. Use a dry soft cloth to wipe the surface. If the disc is quite dirty , Use a soft cloth slightly[...]

T rouble shooting Symptom Cause Solution No power The car ignition switch have not turn on. If the power supply is connected to the car accessory circuits, but the engine is not moving, switch the ignition key to “ACC”. The fuse has been blown. Replace a new one. Presence of CD disc inside the player. Remove the disc from the player, and insert[...]

1. GENERAL 2. CD PLA YER 3. RADIO FM Power Supply Requirements DC 12 V olts, Negative Ground Chassis Dimensions 178(W)x160(D)x 50(H) mm T one Controls -B a s s( a t1 0 0H z ) ± 1 0d B - T reble (at 10 kHz) ±10 dB Maximum Output Power 4x75 watts Current Drain 15 Ampere (max.) Signal to Noise Ratio >5 5d B Channel Separation >4 0d B Frequency[...]

W W W . C A L I B E R . N L CALIBER HEAd OffICE • The Netherlands • Fax: +31 (0)416 69 90 01 • E-mail: info@caliber .nl[...]