Canon 8469B009 manuale d’uso

Wi-Fi Function Instruction Manual E INSTRUCTION MANUAL EOS 70D (W) C OP Y[...]

2 This camera’s wireless LAN functions let you perform a range of tasks wirelessly , from sending images to Web services and other cameras to controlling the camer a remotely , simply by connecting to a Wi-Fi ® network or other devi ce supporting this camer a’s wireless LAN function s. What You Can Do Us ing the Wireless LAN Functions (1) Tran[...]

3 What You Can Do Using the Wireless LAN Functions (1) z T ransfer images betwee n cameras (p.19) T ransfer images between this camera and other Canon cameras with built-in wireless LAN functions. (2) q Connect to a smartphone (p.31, 75) View saved images or operate the camera from your smartphone. Install the dedicated application “EOS Remote”[...]

4 Wi-Fi Function Flowchart z T ransfer images between cameras q Connect to a smartphone Set up another Canon camera with built-in wireless LAN functions Install EOS Remote on a smartphone Connect the cameras directly via a wireless LAN • Camera access point mode* 1 • Infrastructure mode* 2 Transfer images between cameras • View images on the [...]

5 Wi-Fi Function Flowchart *1 Camera access point mode: A simple wireless LAN mode where a came ra and smartphone, or a camera and printer can be directly connected via a wireless LAN. *2 Infrastructure mode: A wireless LAN mode that connects to each Wi-Fi device via a wireless LAN access point. In this mode, communication to a distant Wi-Fi device[...]

6 In this manual, the term “wireless LAN” is used as a general term for Wi-Fi and Canon’s original wire less communication functions. The term “access point” indicates wireless LAN termin als (wireless LAN access points or wireless LAN adapters) that relay wireless LAN connection. Brackets [ ] indicate buttons or icon names or other softw[...]

7 Chapters Introduction 2 Basic Settings for Wireless LAN Functions 11 T ransferring Images Between Cameras 19 Connecting to a Smartphone - 1 31 Printing Images Using a Wi-Fi Printer - 1 45 Using a Wi-Fi Wireless LAN Access Point 55 Connecting to a Smartphone - 2 75 Printing Images Using a Wi-Fi Printer - 2 87 Remote Operation Using EOS Utility 93 [...]

8 2 1 3 4 Introduction 2 What You Can Do Using the Wireless LAN Functions ..................... 2 Wi-Fi Function Flowchart .... .............................................................. 4 Conventions Used in This Manual ........... ......................................... 6 Chapters ................. ........................................ .[...]

9 Contents 5 6 7 8 9 Using a Wi-Fi Wireless LAN Access Point 55 Checking the Type of Access Point ....... ............................... .......... 56 Easy Connection via WPS (PBC Mode) ..... ..................... ............... 57 Easy Connection via WPS (PIN Mode) ..... ..................... ................. 62 Manual Connection by Searching N[...]

Contents 10 12 10 11 13 14 Manual Connection by Searching Netw orks ................ ................ 115 Sending Images to a Web Service ....... ........................................ 120 Reconnecting ........... .................................................................... 126 Registering Multiple Connection Setti ngs .................. [...]

11 Basic Settings for Wireless LAN Functions This chapter describes settin gs necessary for using the camera’s wireless LAN functions. C OP Y[...]

12 First, set the camera’s nickname. When the camera is connected to another device via a wireless LAN, the nickname will be displayed on the device. Be sure to set a nickname for your camera. 1 Select [Wi-Fi]. Under the [ 5 3 ] tab, select [ Wi-Fi ], then press < 0 >. 2 Select [Enable]. Press the < V > key to select [ Enable ], then [...]

13 Registering a Nickname 4 Enter a nickname. For instructions on entering characters, see “Virtual Keyboard Operation” on the next page. Up to 16 characters can be entered. 5 Finish. When you are finished, press the < M > button. Select [ OK ] on the confirmation screen, then press < 0 >. The nickname is registered, and the [ Wi- F[...]

Registering a Nickname 14 Switching to other input areas T o switch between top and bottom input areas, press the < Q > button. Moving the cursor T o move the cursor , press the < U > key in the top area. Entering text In the bottom input area, press the < V > or < U > key to select characters and press < 0 > to enter [...]

15 When you want to prioritize wireless LAN functions, do not operate the shutter button, Mode Dial, or playback button. Otherwise, shooting or playback operation may be prioritized and wireless LAN functions may be terminated during the process. Also, the connection may be terminated when the LCD monitor is closed facing inward. When [ Wi-Fi ] in [...]

Basic Operation and Settings 16 Settings and connection status for [ Wi-Fi ] under the [ 5 3 ] tab can be checked on the camera’s LCD monitor and LCD panel. [Wi-Fi] Settings and Connection Status Wi-Fi connection status Wi-Fi function Wi-Fi function LCD monitor LCD panel Wi-Fi function Wi-Fi connection status W i-Fi function When [Wi-Fi] is set t[...]

17 Basic Operation and Settings Y ou can operate wireless LAN functi ons by touching the screen as well. For details, refer to “Using the T ouc h Screen” in the Camera Instruction Manual. Touch Control Connecting with an Interface Cable When [ 5 3: Wi-Fi ] is set to [ Enable ], interface cable connection is disabled. Set it to [ Disable ] to co[...]

18 MEMO C OP Y[...]

19 Transferring Images Between Cameras Images can be transferred between Canon cameras via the built-in wireless LAN functions. Wireless connection is possible for Canon cameras with built-in wireless LAN functions marketed in 2012 or later . Note that the camera cannot be connected to Canon camcorders, even if they have built-in wire less LAN func[...]

20 Register the target camera to c onnect to via a wireless LAN. The camera can be connected to only one camera at a time. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ z ]. Press the < V > or < U > key to select [ z ] (T ransfer imgs between cameras), then pres[...]

21 Selecting the Connection Destination 4 Select the images to send. Select images on t he camera sending the images (p.22). Do not operate the camera receiving the images. Note that GPS information is not displa yed on the camera’s playback screen even if GPS information is appended to the received image. Shooting locations can be viewed on a vi[...]

22 Selected images are sent one by one. 1 Select an image to send. Press the < U > key to select an image to send, then press < 0 >. Y ou can also press the < I > button to select an image in the index display . T o return to the single-image display , press the < u > button. 2 Select [Send img shown]. T o select a size at w[...]

23 Sending Images Multiple images can be selected and sent. 1 Press < 0 >. 2 Select [Send selected]. T o select a size at which to send the images, select [ Resize image ] and press < 0 >. Press the < U > key to select [ Send selected ], then press < 0 >. 3 Select the images to send. Press the < U > key to select the i[...]

Sending Images 24 4 Reduce the image size. Set it if necessary . For the setting procedures, see the next page. 5 Send the image s. Press the < V > key to select [ Send ], then press < 0 > to send the images. X The transfer progress screen is displayed. T o send another image, repeat steps 1 to 5. 6 T erminate connection . Press the <[...]

25 Sending Images When [ Send selected ] is selected, the confirmation screen for sending images also lets you select the size at which to send them. 1 Select [Resize images to send]. On the confirmation screen for sending images, press the < V > key to select [ Resize images to send ], then press < 0 >. 2 Select the image size. Press t[...]

26 The camera can reconnect to anot her camera for which connection settings have been registered. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ z ]. Select [ z ] (T ransfer imgs between cameras) and press < 0 >. 3 Est ablish a connection. Select [ Connect ] and press[...]

27 Y ou can register up to three camera connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ z ]. Select [ z ] (T ransfer imgs between cameras) and press < 0 >. 3 Select [Choose set.]. Select [ Choose set. ] and press < 0 >. 4 Select [Unspecified].[...]

28 The names displayed for reconnection settings can be changed after the settings are completed. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ z ]. Select [ z ] (T ransfer imgs between cameras) and press < 0 >. 3 Select [Review/change settings]. Select [ Review/chang[...]

29 Changing Setting Names 5 Change the setting name. Change the name of the setting using the virtual keyboard (p.14). Up to 30 characters can be entered. When you are finished, press the < M > button. Select [ OK ] on the confirmation screen and press < 0 > to complete the change. C OP Y[...]

30 MEMO C OP Y[...]

31 Connecting to a Smartphone - 1 Connecting the camera to a smartphone lets you use the smartphone to view , ma nage, and receive images stored in the camera. Y ou ca n also use the smartphone to perform remote shooting. Note that movie shooting is disabled. C OP Y[...]

32 T o communicate with a smartphone, the camera needs to be connected to the smartphone using the dedicated application EOS Remote. EOS Remote can be downloaded fr om the App S tore or Google Play . Install EOS Remote on t he smartphone and then perform the procedures to establish the connection. T o use EOS Remote, a smartphone on which iOS or An[...]

33 The camera and smartphone can be directly connected via a wireless LAN. Because the camera acts as an access point, no other access point is necessary , so you can establish commu nications easily even when you are out. T o establish connection, operatio ns on the smartphone are required. For details, refer to the sm artphone instruction manual.[...]

Using Camera Access Point Mode to Establish a Connection 34 5 Connect the smartphone to the camera. On the Wi-Fi settings menu of the smartphone, select the SSID (network name) displayed on the camera’s LCD monitor . For the password, enter the encryption key displayed on the camera’s LCD monitor . X The next screen may be automatically display[...]

35 Using Camera Access Point Mode to Establish a Connection 9 Connect to the cam era. When pairing is completed, the screen on the left is displayed. Press the < U > key to select [ OK ], then press < 0 >. T o specify viewable images (p.40), press the < B > button. 10 Perform further settings. T o finish settings in this stage, pr[...]

Using Camera Access Point Mode to Establish a Connection 36 If you have selected [ Manual connection ] in step 4 on page 33, set [ SSID ], [ Channel setting ], and [ Encryption settings ] on each screen displayed. 1 Enter an SSID. Enter any character using the virtual keyboard (p.14). When you are finished, press the < M > button. 2 Select [A[...]

37 Y ou can use a smartphone with EOS Remote installed to view images stored in the camera and shoot remotely . The main functions of EOS Remote are described below . T ouch the screen to learn the operation procedures. [Camera Image Viewing] Images stored in the camera can be viewed. Images stored in the camera can be saved on a smartphone. Operat[...]

Operating the Camera Using a Smartphone 38 1 Select [ E xit]. If the screen on the left is not displayed, select [ Wi-Fi funct ion ] under the [ 5 3 ] tab. Select [ Exit ] and press < 0 >. 2 Select [ OK]. Press the < U > key to select [ OK ], then press < 0 > to terminate the connection. Terminating the Conne ction JPEG and RA W i[...]

39 The camera can reconnect to a smartphone for which connection settings have been registered. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ q ]. Select [ q ] (Connect to smartphone) and press < 0 >. 3 Est ablish a connection. Select [ Connect ] and press < 0 >[...]

40 Y ou can specify images viewable fr om a smartphone by operating the camera. Images can be specified durin g connection settings or after the connection is terminated. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ q ]. Select [ q ] (Connect to smartphone) and press < [...]

41 Specifying Viewable Images 5 Select an item. Press the < V > key to select an item, then press < 0 >. Select [ OK ] and press < 0 > to display the setting screen. [All images] All images stored on the card become viewable. [Images from pa st days] S pecify viewable images on the shooting-date basis. Images shot up to nine days [...]

Specifying Viewable Images 42 [File number range] (Select range) Select the first and last images from images arranged by the file number to specify the viewable images. 1 Press the < U > key to select the first image to be set viewable. 2 Press < 0 > to display the image selection screen. Select an image using the < U > key , <[...]

43 Y ou can register up to three smartphone connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ q ]. Select [ q ] (Connect to smartphone) and press < 0 >. 3 Select [Choose set.]. Select [ Choose set. ] and press < 0 >. 4 Select [Unspecified]. Sele[...]

44 MEMO C OP Y[...]

45 4 Printing Images Using a Wi-Fi Printer - 1 Y ou can directly pri nt images by connecting the camera with a wireless LAN compatible printer supporting PictBridge (Wireless LAN) via a wireless LAN. Images can be printed by connecting this camera wi th a printer by PictBridge via a wireless LAN. PictBridge is a standard for easily printing im ages[...]

46 The camera and a printer can be dire ctly connected via a wireless LAN. Because the camera acts as an access point, no other access point is necessary , so you can print images easily no matter where you are. T o connect via a Wi-Fi access point, see “Using a Wi-Fi Wireless LAN Access Point” (p.55). 1 Select [Wi-Fi function]. Under the [ 5 3[...]

47 Using Camera Access Point Mode to Establish a Connection 5 Set the printer ’ s W i-Fi settings to connect to the camera. On the Wi-Fi settings menu of the printer to be used, select the SSID (network name) displayed on the camera’s LCD monitor . For the password, enter the encryption key displayed on the camera’s LCD monitor . For the prin[...]

Using Camera Access Point Mode to Establish a Connection 48 7 Perform further settings. T o finish settings in this stage, press the < V > key to select [ OK ], then press < 0 > to go to step 8. T o change the name of the settings, select [ Settings name ] and press < 0 >. X The virtual keyboard is displayed (p.14). Up to 30 chara[...]

49 Using Camera Access Point Mode to Establish a Connection If you have selected [ Manual connection ] in step 4 on page 46, set [ SSID ], [ Channel setting ], and [ Encryption settings ] on each screen displayed. 1 Enter an SSID. Enter any character using the virtual keyboard (p.14). When you are finished, press the < M > button. 2 Select [A[...]

50 Play back an image. Press the < x > button. X An image is displayed and the < w > icon appears on the upper left of the screen indicating that the printer is connected. For further operations, refer to “Printing Images” in the Camera Instruction Manual. Y o u can also perform “Direct Printing of Print- Ordered Images”. 1 Sele[...]

51 The camera can reconnect to a prin ter for which connection settings have been registered. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ l ]. Select [ l ] (Print from Wi-Fi printer) and press < 0 >. 3 Est ablish a connection. Select [ Connect ] and press < 0 >[...]

52 Y ou can register up to three printer connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ l ]. Select [ l ] (Print from Wi-Fi printer) and press < 0 >. 3 Select [Choose set.]. Select [ Choose set. ] and press < 0 >. 4 Select [Unspecified]. Sele[...]

53 MEMO C OP Y[...]

54 MEMO C OP Y[...]

55 Using a Wi-Fi Wireless LAN Access Point Connecting to a Wi-Fi wire less LAN access point gives you access to the following functions: • Connecting to a smartphone • Printing images using a Wi-Fi printer • Remote operation using EOS Utility • Sending images to a Web service* • Viewing images using a media player * T o send images to a W[...]

56 When Wi-Fi Protected Setup (WPS) is supported • p.57: Easy Connection via WPS (PBC Mode) • p.62: Easy Connection via WPS (PIN Mode) When WPS is not supported • p.67: Manual Connection by Searching Networks If you do not know if the access point you use is WPS-compatible, refer to the access point instruction manual or other documentation. [...]

57 This is a connection mode avail able when using an access point compatible with Wi-Fi Protected Setup (WPS). In pushbutton connection mode (PBC mode), the camera and the access point can be connected simply by pressing the WPS button on the access point. Note that if multiple access points ar e active in the surrounding area, it may be more diff[...]

Easy Connection via WPS (PBC Mode) 58 3 Select [Infrastructure mode]. Displayed when [ q ] or [ l ] is selected. Go to step 4 when selecting [ D ] or [ ]. Press the < V > key to select [ Infrastructure mode ], then press < 0 >. Select [ OK ] and press < 0 > to go to the next screen. 4 Select [WPS (PBC mode)]. Press the < V >[...]

59 Easy Connection via WPS (PBC Mode) [Auto setting] Configures the settings available in [ Manual setting ] automatically . However , this option can only be used in environments using DHCP servers, or access points or router s with DHCP server functionality , such that IP addresses and re lated settings are assigned and configured automatically .[...]

Easy Connection via WPS (PBC Mode) 60 This section explains setting screens for the communication method of each device and service that the ca mera is connected to. Read the page that introduces the selected communication method. Connecting to a Smartphone: Chapter 6 (p.75) Printing Images Using a Wi-Fi Printer: Chapter 7 (p.87) Specifying Setting[...]

61 Easy Connection via WPS (PBC Mode) Remote Operation Using EOS Utility: Chapter 8 (p.93) Viewing Images Using a Media Player: Chapter 10 (p.131) Windows 8/7/Vist a Users When operating the camera remote ly using EOS Utilit y , perform the operations as follows be fore performing the operat ions described on page 94 and after . If these operations[...]

62 This is a connection mode avail able when using an access point compatible with Wi-Fi Protected Setup (WPS). In PIN code connection mode (PIN mode), an 8-digit identif ication number specified on the camera is set at the access point to establish a connection. Even if there are multiple access points active in the surrounding area, a relatively [...]

63 Easy Connection via WPS (PIN Mode) 4 Select [WPS (PIN mode)]. Press the < V > key to select [ WPS (PIN mode) ], then press < 0 >. Select [ OK ] and press < 0 > to go to the next screen. 5 Specify the PIN code at the access point. At the access point, specify the 8-digit PIN code displayed on the camera’s LCD monitor . For ins[...]

Easy Connection via WPS (PIN Mode) 64 [Auto setting] Configures the settings available in [ Manual setting ] automatically . However , this option can only be used in environments using DHCP servers, or access points or router s with DHCP server functionality , such that IP addresses and re lated settings are assigned and configured automatically .[...]

65 Easy Connection via WPS (PIN Mode) This section explains setting screens for the communication method of each device and service that the ca mera is connected to. Read the page that introduces the selected communication method. Connecting to a Smart phone: Chapter 6 (p.75) Printing Images Using a Wi-Fi Printer: Chapter 7 (p.87) Specifying Settin[...]

Easy Connection via WPS (PIN Mode) 66 Remote Operation Using EOS Utility: Chapter 8 (p.93) Viewing Images Using a Media Player: Chapter 10 (p.131) Windows 8/7/Vist a Users When operating the camera remote ly using EOS Utilit y , perform the operations as follows be fore performing the operat ions described on page 94 and after . If these operations[...]

67 When [ Find network ] is selected, a list of active access points nearby is displayed, accompanied by info rmation about them. Select the SSID (or ESS-ID) of the access point to connect to. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select an item. Select either [ q ] [ D ] [ [...]

Manual Connection by Searching Networks 68 5 Select an access point. Press < 0 > to enable the selection of an access point. Press the < V > key to select an access point, then press < 0 >. Select [ OK ] and press < 0 > to go to the next screen (p.69). (1) Indicates whether th e device is in infrastructure or ad hoc mode (2)[...]

69 Manual Connection by Searching Networks Go to the next page when the [ IP address set. ] screen is displayed. Set the encryption key specified for the access point. For details on the specified encryption key , refer to t he access point’s instruction manual. Note that the screens displayed in steps 1 to 3 below vary depending on the authentic[...]

Manual Connection by Searching Networks 70 Press the < V > key to select how the IP address should be set, then press < 0 >. [Auto setting] Configures the settings available in [ Manual setting ] automatically . However , this option can only be used in environment s using DHCP servers, or access points or routers with DHCP server funct[...]

71 Manual Connection by Searching Networks If you are not sure what to enter , see “Checking Network Settings” (p.166), or ask the network adm inistrator or another person knowledgeable about the network. This section explains setting screens for the communication method of each device and service that the ca mera is connected to. Read the page[...]

Manual Connection by Searching Networks 72 Remote Operation Using EOS Utility: Chapter 8 (p.93) Viewing Images Using a Media Player: Chapter 10 (p.131) Windows 8/7/Vist a Users When operating the camera remote ly using EOS Utilit y , perform the operations as follows be fore performing the operat ions described on page 94 and after . If these opera[...]

73 MEMO C OP Y[...]

74 MEMO C OP Y[...]

75 Connecting to a Smartphone - 2 Connecting the camera to a smartphone lets you use the smartphone to view , ma nage, and receive images stored in the camera. Y ou ca n also use the smartphone to perform remote shooting. Note that movie shooting is disabled. These instructions should be followed only after the smartphone is connected to an access [...]

76 These instructions are continued from Chapter 5. T o establish connection, operatio ns on the smartphone are required. For details, refer to the smar tphone’s instruction manual. T o connect in the camera access point mode, see “Using Camera Access Point Mode to Establish a Connection” (p.33). 1 St art EOS Remote on the smartphone. When th[...]

77 Using Infrastructure Mode to Establish a Connection 4 Connect to the cam era. When pairing is completed, the screen on the left is displayed. Press the < U > key to select [ OK ], then press < 0 >. T o specify viewable images (p.81), press the < B > button. 5 Perform further settings. T o finish settings in this stage, press th[...]

78 Y ou can use a smartphone with EOS Remote installed to view images stored in the camera and shoot remotely . The main functions of EOS Remote are described below . T ouch the screen to learn the operation procedures. [Camera Image Viewing] Images stored in the camera can be viewed. Images stored in the camera can be saved on a smartphone. Operat[...]

79 Operating the Camera Using a Smartphone 1 Select [E xit]. If the screen on the left is not displayed, select [ Wi-F i function ] under the [ 5 3 ] tab. Select [ Exit ] and press < 0 >. 2 Select [O K]. Press the < U > key to select [ OK ], then press < 0 > to terminate the connection. Terminating the Connection JPEG and RA W ima[...]

80 The camera can reconnect to a smartphone for which connection settings have been registered. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ q ]. Select [ q ] (Connect to smartphone) and press < 0 >. 3 Est ablish a connection. Select [ Connect ] and press < 0 >[...]

81 Y ou can specify images viewable fr om a smartphone by operating the camera. Images can be specified durin g connection settings or after the connection is terminated. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ q ]. Select [ q ] (Connect to smartphone) and press < [...]

Specifying Viewable Images 82 5 Select an item. Press the < V > key to select an item, then press < 0 >. Select [ OK ] and press < 0 > to display the setting screen. [All images] All images stored on the card become viewable. [Images from pa st days] S pecify viewable images on the shooting-date basis. Images shot up to nine days [...]

83 Specifying Viewable Images [File number range] (Select range) Select the first and last images from images arranged by the file number to specify the viewable images. 1 Press the < U > key to select the first image to be set viewable. 2 Press < 0 > to display the image selection screen. Select an image using the < U > key , <[...]

84 Y ou can register up to three smartphone connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ q ]. Select [ q ] (Connect to smartphone) and press < 0 >. 3 Select [Choose set.]. Select [ Choose set. ] and press < 0 >. 4 Select [Unspecified]. Sele[...]

85 MEMO C OP Y[...]

86 MEMO C OP Y[...]

87 7 Printing Images Using a Wi-Fi Printer - 2 Y ou can directly pri nt images by connecting the camera with a wireless LAN compatible printer supporting PictBridge (Wireless LAN) via a wireless LAN. These instructions sho uld be followed only after the printer is connected to an access point. For information about settings and config uration, refe[...]

88 These instructions are continued from Chapter 5. T o connect in camera access point mode, see “Using Camera Access Point Mode to Establish a Connection” (p.46). 1 Select the printer to connect to. When a list of detected printers is displayed, select the printer to connect to and press < 0 >. X Some printers may make a beeping sound. W[...]

89 Using Infrastructure Mode to Establish a Connection 3 Save the settings. Select [ OK ] and press < 0 > to save the settings. X The [ l Connection ] screen will be displayed. T o return to the menu, press the < M > button. The settings for networking with the printer are now complete. C OP Y[...]

90 Play back an image. Press the < x > button. X An image is displayed and the < w > icon appears on the upper left of the screen indicating that the printer is connected. For further operations, refer to “Printing Images” in the Camera Instruction Manual. Y o u can also perform “Direct Printing of Print- Ordered Images”. 1 Sele[...]

91 The camera can reconnect to a prin ter for which connection settings have been registered. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ l ]. Select [ l ] (Print from Wi-Fi printer) and press < 0 >. 3 Est ablish a connection. Select [ Connect ] and press < 0 >[...]

92 Y ou can register up to three printer connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ l ]. Select [ l ] (Print from Wi-Fi printer) and press < 0 >. 3 Select [Choose set.]. Select [ Choose set. ] and press < 0 >. 4 Select [Unspecified]. Sele[...]

93 Remote Operation Using EOS Utility Y ou can perform remote oper ation using EOS Utility via a wireless LAN. In addition to remote shooting, various camera operations are av ailable because a wireless LAN is used instead of an interface cable. Note that movie shooting is disabled. These instructions should be followed only after the computer with[...]

94 These instructions are continued from Chapter 5. With EOS Utility , you can use the prov ided Pairing Software to establish a connection between the camera and a computer . Pairing Software is installed automatically during “easy inst allation” of the software provided with the camera. If it is not inst alled, install it on the computer to b[...]

95 Configuring EOS Utility Communication Settings 2 St art the pairing sof t ware. S tart the pairing sof tware on the computer . Normally , it is installed in the same location as EOS Utility . X After the pairing sof tware starts up, an icon is displayed on the task bar . X When the camera is detected, a message is displayed. 3 Double-click the p[...]

Configuring EOS Utility Communication Settings 96 5 Select [OK]. When the camera detects the computer on which you clicked [ Connect ] in step 4, the screen on the left is displayed. Press the < U > key to select [ OK ], then press < 0 >. 6 Perform further settings. T o finish settings in this stage, press the < V > key to select [...]

97 Configuring EOS Utility Communication Settings There is no need to complete pair ing again if you will continue using a particular camera and computer together after p airing without changing the settings. T o reconnect to the same computer , simply turn on the camera and start the p airing software. The connection between the camera and compute[...]

98 For EOS Utility instructions, refer to the EOS Utility instruction manual (CD-ROM). In addition to remote shooting, various camera operations are available. Note that movie shooting is disabled. 1 Select [Exit]. If the screen on the left is not displayed, select [ Wi-Fi function ] under the [ 5 3 ] tab. Select [ Exit ] and press < 0 >. 2 S[...]

99 The camera can reconnect to a comp uter for which connection settings have been registered. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ D ]. Select [ D ] (Remote control (EOS Utility)) and press < 0 >. 3 Est ablish a connection. Select [ Connect ] and press < [...]

100 Y ou can register up to three EOS Utility connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ D ]. Select [ D ] (Remote control (EOS Utility)) and press < 0 >. 3 Select [Choose set.]. Select [ Choose set. ] and press < 0 >. 4 Select [Unspecifi[...]

101 MEMO C OP Y[...]

102 MEMO C OP Y[...]

103 Sending Images to a Web Service Y ou can register various We b services on the camera and send images stored in the camera to them. CANON iMAGE GA TEWA Y Web serv ices are not supported in certain countries and areas. Fo r information on countries and areas supporting CANON iMAGE GA TEWA Y services, refer to the Canon Web site (http://canon.com[...]

104 T o send images to Web services, you need to sign up as a CANON iMAGE GA TEWA Y member (free of charge). Once you are a CANON iMAGE GA TEWA Y member, you can publish photos you took in online albums and use a range of services. This Web site also serves as a bridge to s end images wirelessly from the camera or for sending links to the online al[...]

105 Preparation The general procedu re for sending images to a W eb ser vice is as follo ws. 1 Prepare a computer on which EOS Utility h as been inst alled. Use the software CD-ROM provided with the camera to install EOS Utility . 2 Access Canon Web site from the computer and sign up as a CANON iMAGE GA TEW A Y member (free of charge). If you are a[...]

106 When Wi-Fi Protected Setup (WPS) is supported • p.107: Easy Connection via WPS (PBC Mode) • p.1 1 1: Easy Connection via WPS (PIN Mode) When WPS is not supported • p.1 15: Manual Connection by Searching Networks If you do not know if the access point you use is WPS-compatible, refer to the access point instruction manual or other document[...]

107 This is a connection mode avail able when using an access point compatible with Wi-Fi Protected Setup (WPS). In pushbutton connection mode (PBC mode), the camera and the access point can be connected simply by pressing the WPS button on the access point. Note that if multiple access points ar e active in the surrounding area, it may be more dif[...]

Easy Connection via WPS (PBC Mode) 108 3 Select a Web service. Select a Web service to connect to, then press < 0 >. The contents and ordering of the list of items displayed will vary depending on settings. The Web service to connect to can be changed later (p.126). X When the [ Send to ] screen (p.125) is displayed, select a destination and [...]

109 Easy Connection via WPS (PBC Mode) [Auto setting] Configures the settings available in [ Manual setting ] automatically . However , this option can only be used in environments using DHCP servers ,or access points or router s with DHCP server functionality , such that IP addresses and re lated settings are assigned and configured automatically [...]

Easy Connection via WPS (PBC Mode) 110 7 Perform further settings. T o finish settings in this stage, press the < V > key to select [ OK ], then press < 0 > to go to step 8. T o change the name of the settings, select [ Settings name ] and press < 0 >. X The virtual keyboard is displayed (p.14). Up to 30 characters can be entered [...]

111 This is a connection mode avail able when using an access point compatible with Wi-Fi Protected Setup (WPS). In PIN code connection mode (PIN mode), an 8-digit identif ication number specified on the camera is set at the access point to establish a connection. Even if there are multiple access points active in the surrounding area, a relatively[...]

Easy Connection via WPS (PIN Mode) 112 4 Select [WPS (PIN mode)]. Press the < V > key to select [ WPS (PIN mode) ], then press < 0 >. Select [ OK ] and press < 0 > to go to the next screen. 5 Specify the PIN code at the access point. At the access point, specify the 8-digit PIN code displayed on the camera’s LCD monitor . For in[...]

113 Easy Connection via WPS (PIN Mode) [Auto setting] Configures the settings available in [ Manual setting ] automatically . However , this option can only be used in environments using DHCP servers, or access points or router s with DHCP server functionality , such that IP addresses and re lated settings are assigned and configured automatically [...]

Easy Connection via WPS (PIN Mode) 114 8 Perform further settings. T o finish settings in this stage, press the < V > key to select [ OK ], then press < 0 > to go to step 9. T o change the name of the settings, select [ Settings name ] and press < 0 >. X The virtual keyboard is displayed (p.14). Up to 30 characters can be entered [...]

115 When [ Find network ] is selected, a list of active access points nearby is displayed, accompanied by info rmation about them. Select the SSID (or ESS-ID) of the access point to connect to. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ w ]. Select [ w ] (Upload to Web s[...]

Manual Connection by Searching Networks 116 4 Select [Find network]. Press the < V > key to select [ Find network ], then press < 0 >. Select [ OK ] and press < 0 > to go to the next screen. 5 Select an access point. Press < 0 > to enable the selection of an access point. Press the < V > key to select an access point, [...]

117 Manual Connection by Searching Networks Go to the next page when the [ IP address set. ] screen is displayed. Set the encryption key specified for the access point. For details on the specified encryption key , refer to t he access point’s instruction manual. Note that the screens displayed in steps 1 to 3 below vary depending on the authenti[...]

Manual Connection by Searching Networks 118 Press the < V > key to select how the IP address should be set, then press < 0 >. [Auto setting] Configures the settings available in [ Manual setting ] automatically . However , this option can only be used in environments using DHCP servers, or access points or router s with DHCP server func[...]

119 Manual Connection by Searching Networks If you are not sure what to enter , see “Checking Network Settings” (p.166), or ask the network adm inistrator or another person knowledgeable about the network. 1 Perform further settings. T o finish settings in this stage, press the < V > key to select [ OK ], then press < 0 > to go to s[...]

120 Y ou can share movies and still photos you shot by sending them to a Web service registered on the camera such as CANON iMAGE GA TEWA Y . Sent images are saved in an online album on CANON iMAGE GA TEWA Y and a link to the album is sent to each Web service. It is also possible to send images to Web services directly depending on the selected Web[...]

121 Sending Images to a Web Service A [ T erms of use ] screen is displayed when sending images to certain W eb services. Thoroughly read the terms of use, press the < U > key to select [ I Agree ], then press < 0 >. The screen can be scrolled up and down by pressing the < V > key . If playback or shooting operation is started du [...]

Sending Images to a Web Service 122 Multiple images can be selected and sent. 1 Press < 0 >. 2 Select [Send selected]. T o select a size at which to send the images, select [ Resize image ] and press < 0 >. Press the < U > key to select [ Send selected ], then press < 0 >. 3 Select the images to send. Press the < U > k[...]

123 Sending Images to a Web Service 4 Reduce the image size. Set it if necessary . For the setting procedures, see the next page. When Y ouT ube is selected as the destination, [ Resize images to send ] is not displayed. 5 Send the im ages. Press the < V > key to select [ Send ], then press < 0 >. X The transfer progress screen is displ[...]

Sending Images to a Web Service 124 When [ Send selected ] is selected, the confirmation screen for sending images also lets you select the size at which to send them. 1 Select [Resize images to send]. On the confirmation screen for sending images, press the < V > key to select [ Resize images to send ], then press < 0 >. 2 Select the i[...]

125 Sending Images to a Web Service Y ou can send links to posted image s to registered destinations. T o register Email destinations and settings for sending Emails, you must use a computer . For more information, refer to the EOS Utility Instruction Manual (CD-ROM). When [ ] (Email) is selected on the [ Upload to Web service ] screen, the [ Send [...]

126 The camera can reconnect to a Web service for which connection settings have been registered. The c onnection to the access point only has to be established once. Y ou do not need to establish a new connection for each Web service. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 S[...]

127 Y ou can register up to three W eb service connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ w ]. Select [ w ] (Upload to Web service) and press < 0 >. 3 Select a Web service. Select a Web service and press < 0 >. X When the [ Send to ] scre[...]

Registering Multiple Connection Settings 128 5 Select [Unspecified]. Select [ Unspecified ] and press < 0 >. X The connection settings screen is displayed. Follow the procedures displayed to complete the connection settings. C OP Y[...]

129 MEMO C OP Y[...]

130 MEMO C OP Y[...]

131 Viewing Images Using a Media Player Images on a card in the camera can be viewed on a TV set via a wireless LAN. This function requires a DLNA*-compatible TV set, game machine, smartphone, or other media player . In this manual, the term “media pl ayer” is used to refer to any such device. * DLNA: Digital Living Network Alliance These instr[...]

132 These instructions are continued from Chapter 5. 1 Perform further settings. T o finish settings in this stage, press the < V > key to select [ OK ], then press < 0 > to go to step 2. T o change the name of the settings, select [ Settings name ] and press < 0 >. X The virtual keyboard is displayed (p.14). Up to 30 characters c[...]

133 Images on the card in the camera c an be displayed on a TV set using a media player . Note that RA W im ages and movies cannot be displayed. The following operations must be per formed on the media player . For details, refer to the media player’s instruction manual. 1 Display the media player settings screen on your TV set. Using the media p[...]

Displaying Images on a TV set 134 1 Select [Exit]. If the screen on the left is not displayed, select [ Wi-Fi function ] under the [ 5 3 ] tab. Select [ Exit ] and press < 0 >. 2 Select [OK]. Press the < U > key to select [ OK ], then press < 0 > to terminate the connection. Terminating the Connection Information overlay and detai[...]

135 The camera can reconnect to a medi a player for which connection settings have been registered. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ ]. Select [ ] (View images on DLNA devices) and press < 0 >. 3 Est ablish a connection. Select [ Connect ] and press < [...]

136 Y ou can register up to three media player connection settings. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select [ ]. Select [ ] (View images on DLNA devices) and press < 0 >. 3 Select [Choose set.]. Select [ Choose set. ] and press < 0 >. 4 Select [Unspecified].[...]

137 MEMO C OP Y[...]

138 MEMO C OP Y[...]

139 Using Quick Control to Connect to a Wireless LAN Quick Control or Quick Cont rol during playback lets you connect to a wireless LAN using registered connection destination settings. Connection destination settings cann ot be set using Quick Control. Set connection destination se ttings from the menu screen. C OP Y[...]

140 Y ou can use Quick Control to ac cess Wi-Fi functions for which connection destination settings have been registered. Three functions are available in Quick Control: [ q ] (Connect to smartphone), [ D ] (Remote control (EOS Utility)), and [ ] (View images on DLNA devices). Set the Mode Dial to the Creative Zone before using these functions. 1 S[...]

141 Y ou can also use Quick Control during playback to access Wi-Fi functions for which connection destination settings have been registered. From Quick Control duri ng playback, two functions can be used: [ z ] (T ransfer images between cameras) and [ w ] (Upload to Web service). 1 Press the < Q > button. While an image is displayed, press t[...]

Connecting from a Playback Screen 142 3 Select the item to connect to. Select the item to connect to and press < 0 >. Items for which connection destination settings have not been registered are grayed out. X When you select [ w ] (Upload to Web service), a screen to select a Web service is displayed. Select the item to connect to and press &[...]

143 MEMO C OP Y[...]

144 MEMO C OP Y[...]

145 Managing Settings C OP Y[...]

146 Check the network settings as follows. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Select the item to check settings for . Press the < V > or < U > key to select an item, then press < 0 >. When you select [ w ], a screen to select a Web service is displayed. [...]

147 Checking or Changing Settings When the Connection Has Been T erminated Select the connection destination, select [ Review/change settings ], then press < 0 >. Select [ Confirm set. ] and press < 0 > to display the settings. C OP Y[...]

Checking or Changing Settings 148 T o change settings, select [ Change set. ] on the [ Review/change settings ] screen shown on page 147. X A screen for setting connection is displayed. Configure connection settings again following the procedures. T o change the name of the settings, select [ Change settings name ] on the [ Review/change settings ][...]

149 All wireless LAN settings can be deleted by the procedure described below . By deleting the wireless LAN settings, you can prevent them from being exposed when you lend or give your camera to other people. 1 Select [Wi-Fi function]. Under the [ 5 3 ] tab, set [ Wi-Fi ] to [ Enable ], then select [ Wi-Fi function ]. 2 Press the < B > butto[...]

150 MEMO C OP Y[...]

151 Troubleshooting Guide Tr ansfer speed in ad hoc mode may become extremely slow when the camera is used with certai n types of computer . For more information, contact your dealer or nearest Canon Service Center . C OP Y[...]

152 When < k > or < l > on the LCD panel blinks, display the error content following one of the procedures below. Then, eliminate the cause of the error referring to t he examples shown in this chapter. Select [ 5 3: Wi-Fi function ] 9 [ General sett. ] 9 [ Error details ], then press < 0 >. Select [ 5 3: Wi-Fi function ] and pres[...]

153 Responding to Error Messages In the case of [ q ], is EOS Remote running? X Establish a connection using EOS Remote (p.37, 78). In the case of [ l ], is the power of the printer on? X T urn on the printer . In the case of [ D ], is the pairing sof tware running? X S t art the p airing sof tware and follow the instructions to re-establish the co[...]

Responding to Error Messages 154 Is the DHCP server working correctly? X Check the DHCP server settings to make sure it is working correctly as a DHCP server . X If applicable, ask your network admin istrator to ensure the DHCP server is available. What to check on the camera On the camera, does the DNS server ’ s IP address setting match the ser[...]

155 Responding to Error Messages What to check on the network as a whole Does your network include a router or similar device that serves as a gateway? X If applicable, ask your network administrator for the network gateway address and enter it on t he camera (p.59, 64, 70, 109, 1 13, 1 18, 166). X Make sure that the gateway addr ess setting is cor[...]

Responding to Error Messages 156 Are any obstacles blocking the line of sight between the camera and the antenna of the access point? X Move the antenna of the access point to a position clearly visible from the point of view of the camera (p.164). What to check on the camera Does the SSID set on the camera match that of the access point? X Check t[...]

157 Responding to Error Messages Are the camera and the access point set to use the same authentication method? X The camera supports the fo llowing authentication methods: [ Open system ], [ Shared key ], [ WP A-PSK ], and [ WP A2-PSK ] (p.68, 1 16). X When using an AirPort for communication in infrastructure mode, [ Open system ] is not supported[...]

Responding to Error Messages 158 The wireless LAN connection w as lost, for some reason, and the connection cannot be restored. X The following are possible reason s: excessive access to the access point from other device, a microwave oven or similar appliance in use nearby (interfering with IEEE 802.1 1b/g/n (2.4 GHz band)), or influence of rain o[...]

159 Responding to Error Messages Connection is in progress by ot her access points in Pushbutton Connection mode (PBC mode) of Wi-Fi Protected Setup (WPS). X W ait a while before trying to establish the connection, or try to establish a connection in PIN code connection mode (PIN mode) (p.62, 1 1 1). A problem other than error number 1 1 to 69 occu[...]

Responding to Error Messages 160 Check if the folder number of the camera to receive data is 999 and the file number 9999. X Folder or file names cannot be created automatically . Replace the card in the camera to receive dat a, then try sending the data again. Is the card working properly? X Replace the card in the camera to receive data, then try[...]

161 Responding to Error Messages Has the target camera terminated the connection? X Check the connection status and connect the cameras again. A problem other than those described in errors 101 through 108 occurred during the connection between cameras. X Connect the cameras again. The target W eb server does not have enough free space. X Delete un[...]

Responding to Error Messages 162 Is the network connected? X Check the connection status of the network. CANON iMAGE GA TEW A Y is under maintenance or load is concentrated temporarily . X T ry connecting to the Web service again later . A problem other than error 121 to 126 occurred during the connection to the Web service. X T ry connecting to th[...]

163 If a problem occurs with the camera, first refer to this T roubleshooting Guide. If this T roubleshooting Guide does not resolve the problem, contact your dealer or nearest Canon Service Center . Set [ 5 3: Wi-Fi ] to [ Disable ]. If [ Wi-Fi ] is set to [ Enable ], even when the camera is connected to a computer , printer , GPS receiver , or ot[...]

164 If the transmission rate drops, the c onnection is lost, or other problems occur when using the camera with a wireless LAN, try the following corrective actions. When using indoors, install the de vice in the same room that you are shooting. Install the device higher than the camera. Install the device where people or objects do not come betwee[...]

165 Wireless LAN Notes Wireless LAN radio waves can be easily intercepted. For this reason, we recommend activating encrypted communication in the access point settings. When [ 5 3: Wi-Fi ] is set to [ Enable ], interface cable connection is disabled. Set it to [ Disable ] and then connect an interface cable. When the camera is connected to a compu[...]

166 Click the Windows [ Start ] button 9 [ All Programs ] 9 [ Accessories ] 9 [ Command Prompt ]. T ype ipconfig/all and press the < Enter > key . The IP address assigned to the computer is displayed, as well as the subnet mask, gateway , and DNS server information. T o avoid using the same IP addre ss for the computer and other devices on th[...]

167 MEMO C OP Y[...]

168 MEMO C OP Y[...]

169 Reference C OP Y[...]

170 9 Wireless LAN S tandards compliance: IEEE 802.1 1b/g/n T r an smission method: DS-SS modulation (IEEE 802.1 1b) OFDM modulation (IEEE 802.1 1g/n) T r an smission range: A pprox. 30 m/98.4 ft. * With no obstructions between th e tran smitting and receiving antennas and no radio interference * With a large, high-perfor mance antenna attached to [...]

171 A Access point encryption .......... 68, 116 Android................. .....................32, 55 Auto power off .. ..................... .......... 15 C Cable.................... ................. ..........17 Camera access point mode ......33, 46 CANON iMAGE GA TEWA Y ..........104 Changing setting names ......... 28, 148 Changing settings ..[...]

172 Index T T ouch control .... ................. ............. 17 T ransferring images between cameras ................. ......................... 19 T roubleshooting Gu ide ................. 151 V Viewable images.... ................... 40, 81 Viewing images...... ....................... 131 W Wi-Fi printer ...... ..................... ... 45, 87[...]

MEMO C OP Y[...]

CPY-E059-001 © C ANON INC. 2013 CANON INC. 30-2, Shimomaruko 3-chome, Ohta-ku, T okyo 146-8501, Japan U.S.A. CANON U.S.A. INC. http://www .usa.canon.com/eos http://www .usa.canon.com/support For all inquires concerning this product, call toll free in the U.S. 1-800-OK-CANON CANADA CANON CANADA INC. HEADQUARTERS 6390 Dixie Road, Mississauga, Ontari[...]