Canon AXIS 1650 manuale d’uso

AXIS 1650 User’s Manual 1 AXIS 1650 User’s Manual The Network Print & Scan Server for Canon Printers and Multifunctional Products Including support for Canon Advanced Printing Technology Canon Advanced Raster Printing System as well as Canon BubbleJet Printers[...]

Safety Notices 2 AXIS 1650 User’s Manual Section 1 Safety Notices Take some time to read through the safety notice s before installing the print server . Please observe all safety markings and instructions when using this product. Important: Observe “Important:” in the text to avoid operation al impairment. Do not proceed u ntil you have full[...]

Table of Contents AXIS 1650 User’s Manual 3 Section 2 Table of Contents Section 1 Safety Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Section 2 Table of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Section 3 Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Table of Contents 4 AXIS 1650 User’s Manual Invoking a Scan from the Canon Device . . . . . . . . . . . 59 Section 10 The Test Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61 Section 11 Upgrading the Firmware . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Section 12 Enabling Unicast Network Communication . [...]

Preface AXIS 1650 User’s Manual 5 Section 3 Preface Thank you for purchasing the AX IS 1650. This product has been developed to connect your Canon pr inter anywhere in your network, allowing all network users acce ss to shared printer resources. About this Manual This manual is applicab le for the AXIS 1650 print server with firmware version 2.00[...]

Preface 6 AXIS 1650 User’s Manual If you are connected to the I nternet, you can: • Download user documentati on and firmware updates • Find answers to previously resolv ed problems in the FAQ database. Search by product, category or phrase • Report problems to Axis support sta ff by logging in to your private support area • Visit the Axi[...]

Product Overview AXIS 1650 User’s Manual 7 Section 4 Product Overview Package Contents The AXIS 1650 Network Print Server Supported De vices AXIS 1650 is developed to network Ca non printers and multifunctional products. AXIS 1650 supports host-bas ed printing methods such as Canon Advanced Printing Technology, Canon Advanced Raster Printing Syst[...]

Product Overview 8 AXIS 1650 User’s Manual Supported Environments The AXIS 1650 supports printing over TCP/IP from the following clients: • Windows 98 • Windows Me • Windows 2000 • Windows XP • Windows Server 2003 •N e t w a r e Installation and Integration The installation of the AXIS 1650 and its integration into the network is perf[...]

Product Overview AXIS 1650 User’s Manual 9 Printer Ports • One Low- and Full-Speed USB 1.1 port that also works with USB 2.0. Hi-Speed is not supported. • One high-speed IEEE 1284 compatible parallel port that plugs directly into the printer´s parallel port. AXIS 1650 is featured with two ports for ease of integration with most Canon printer[...]

Print Server Installation 10 AXIS 1650 User’s Manual Section 5 Print Server Installation Follow these steps to install and configure your AXIS 1650: 1. Connect the Hardware , on page 10 2. Set the IP Address , on page 11 3. Windows Installation , on page 17 Connect the Hardware Backside label of print server 1. Make sure that your printer is swit[...]

Print Server Installation AXIS 1650 User’s Manual 11 7. Optionally, you can mount the print server e.g. on the back of the printer or on a wall, using the supplied clip and holder. Set the IP Address Before setting the IP address, make a note of the print serve r’s serial number (S/N), located on its backside label. See Backside label of print [...]

Print Server Installation 12 AXIS 1650 User’s Manual 1. Install AXIS IP JumpStarter, it is available on the AXIS 1650 CD and on www.axis.com 2. Select a print server from the Serial Nu mber list. All AXIS 1650 appear with the default IP address 192.168.0.90 . If you are installing several AXIS 1650, check the Serial Number to locate a specifi c p[...]

Print Server Installation AXIS 1650 User’s Manual 13 Set a Static IP Address using ARP in Windows 98/Me/2000/XP/2003 1. Open a Command Prompt and type: Example: 2. If the host returns Reply from 192.168.3.191 ... or a similar message, the IP address has been set suc cess fully . If the host returns Request timed out you need to reboot the print s[...]

Print Server Installation 14 AXIS 1650 User’s Manual Set an IP Address with Ne tSpot Device Installer software NetSpot Device Installer is software fr om Canon that allows you to assign an IP address and manage Canon de vices connected to your network. NetSpot Device Installe r software is supplied on CD-ROM with your Canon printer and on www.can[...]

Print Server Installation AXIS 1650 User’s Manual 15 4. From the Init ial Settings dialogue box, select the AXIS 1650 print server from the Product Type drop-down list and click Next . 5. Next, configure the TCP/IP protocol: 6. After you have finished the configuration, click OK . Note: If you get a message read ing “Resetting device”, click [...]

Print Server Installation 16 AXIS 1650 User’s Manual Notes • You need to know the Ethernet address of your AXIS 1650 to perform the installation. The Ethernet addre ss is based on the serial number of your AXIS 1650. For example, an AXIS 1650 with the serial number of 00408C181CF0, will have the corresponding Ethernet address of 00 40 8C 18 1C [...]

Windows Installation AXIS 1650 User’s Manual 17 Section 6 Windows Installation Installing Printer Ports using AXIS CAPT Print Monitor AXIS CAPT Print Monitor is a Windows component that has been developed for network printing. AX IS CAPT Print Monitor is the recommended tool for Canon printers, including CAPT, Canon Advanced Raster Printing Syste[...]

Windows Installation 18 AXIS 1650 User’s Manual 3. Read the License Agreement and click Yes if you accept the terms. 4. Leave this check-box unchecked* and click Next . (If you want to disable broadcast status updates and enable unicast, see Enabling Unicast Network Communication , on page 64.) Windows XP/Server 2003 onl y: Make sure the Allow th[...]

Windows Installation AXIS 1650 User’s Manual 19 Windows XP SP2 is installed, if Allow this application to process incoming network printer information on the local subnet is checked. 5. Click Finish to finish the installation . 6. Windows XP/Server 2003: Go to Start | Printers and Faxes and click the Add a Printer icon to start the Add Printer Wi[...]

Windows Installation 20 AXIS 1650 User’s Manual 7. Select Local Printer attached t o this computer. Make sure the Automatically detect and instal l my Plug and Play printer check box is not checked. Click Next. 8. Click the Create a new port radio button and select AXIS CAPT Port. Click Next. Note: AXIS CAPT Port is used for all Canon printers, i[...]

Windows Installation AXIS 1650 User’s Manual 21 9. The AXIS CAPT Port pop-up window will appear. Select your AXIS 1650 from the Available network printers list and click OK . 10. Select Manufacturer and Printer from the driver list. Click Next . 11. Choose whether you want to keep the ex isting driver or to replace it. If you already have the pri[...]

Windows Installation 22 AXIS 1650 User’s Manual 14. Print a test page to verify. You have now completed the installation. Print Server Installation using AXIS CA PT Print Monitor in Windows 98 and Me Follow the procedure below to inst all TCP/IP Ports from a Windows 98/Me workstation: 1. Install the AXIS CAPT Print Monitor on your workstation. Th[...]

Windows Installation AXIS 1650 User’s Manual 23 4. Leave this check-box unchecked and click Ne xt . (If you want to disable broadcast st atus updates and enable unicast, See Enabling Unicast Network Communication , on pag e 64 for instructions.) 5. Click Finish to finish the installation . 6. Select Settings | Printers from the St art menu and do[...]

Windows Installation 24 AXIS 1650 User’s Manual 10. Select the port you wish to use and click OK. 11. Enter a descript ive name for your printer and click Next> 12. Click the checkbox if you want to print a test page and click Finish . Remote Printer Port 1. The printer you defined above is no w displayed in the printers folder. Right-click th[...]

Windows Installation AXIS 1650 User’s Manual 25 Print Server Installation using the Standard TCP/IP Port in Windows 2000/XP/2003 Follow the instructions below to use the Windows Standard TCP/IP Port to add a network printer in Windows 2000/ Windows XP/2003 . Windows XP/ Server 2003: 1. Go to Start | (Settings) | Printers and Faxes and click the A[...]

Windows Installation 26 AXIS 1650 User’s Manual 4. In the Printer Nam e or IP Addre ss field, enter the IP address of the print server. Example: 192.168.3.191 . The Port Name field will be filled in automatically. Click Next . 5. Select Manufacturer and Printer from the lists. Click Next . 6. If you already have the printer’s driv er installed,[...]

Windows Installation AXIS 1650 User’s Manual 27 8. Next, from y our deskto p, go to Start | Printers (and Faxes). Highl ight the installed printer and right-click, choose Properties, then Ports | Configure Port. 9. In the LPR Settings - Queue Name field, you will see the value "z". In the Queue Name field, type USB1 or LPT1 , depending [...]

Adding Printers in NetWare 28 AXIS 1650 User’s Manual Section 7 Adding Printers in NetWare This section describes how to contin ue the installation of the AXIS 1650 in a NetWare environment. iPrint Using iPrint in the NetWare environm ent, users simply point to a Web page that displays all printers ava ilable for installation. By clicking a print[...]

Adding Printers in NetWare AXIS 1650 User’s Manual 29 To check the state of the Broker, select Roles and Tasks | iPrint | Manage Broker . Its state has to be active as well. Create a Printer In the iManager, click Roles and Tasks | iPrint | Create Printer . The Create Printer dialogue appears. Type a name for the printer to be created (e.g. Canon[...]

Adding Printers in NetWare 30 AXIS 1650 User’s Manual Select Default Drivers for Your Platforms For each platform in you r network, select the de fault printer drivers to install (the drivers presented ar e those re gister ed in the Br oke r; new drivers can be added from the Manage Broker task). Click Next . You will now receive a confirmation t[...]

Adding Printers in NetWare AXIS 1650 User’s Manual 31 it in the Contents list and click Apply . Check Printer Health Select Roles and Tasks | iPrint | Manage Printer | Printer Health Monitor to check the health of the printer.[...]

Adding Printers in NetWare 32 AXIS 1650 User’s Manual Click Back to return to the Manage Printer main page. Enable iPrint Support In the Manage Printe r main page, click the Client Support tab. To enable iPrint support, check Enable iPrint support , click Apply and OK . Make the Newly Created Printer Available (Optional) Using the iPrint Map Desi[...]

Adding Printers in NetWare AXIS 1650 User’s Manual 33 5. From the Printer List , select the printer agent you want associated with this printer icon (e.g. CanonMF ). The Printer URL and Mouse Over Text will automatically be filled in with the printer agent information. Printer URL is the URL created for the printer when IPP was enabled for the pr[...]

Adding Printers in NetWare 34 AXIS 1650 User’s Manual 5. Select Container (e.g. Axis ) and the printer (e.g. CanonMF ). 6. Wait for the printer to be installed. 7. Finally, print a test page. Setup using NetWare 6.0 Setting up iPrint in a NetWare 6. 0 environment is rather similar to performing the same task in the 6.5 version. Launch the iManage[...]

Adding Printers in NetWare AXIS 1650 User’s Manual 35 Configure Novell LPR Gateway for the Created Printer To configure the gateway, enter Host IP address of the AXIS 1650 (e.g. 171.15.114.137 ). Instead of the Host IP address you can use the Host name (e.g. CanonMF.tl.com ). As Printer name , enter the printer port (e.g. USB1 ). Click Next . Sel[...]

Adding Printers in NetWare 36 AXIS 1650 User’s Manual default container to find th e newly created printer (e.g. CanonMF ), select it in the Contents list and click Next . Check Printer Health Select Printer Health Monitor to check the health of the printer. Click Back to return to the Manage Printer main page.[...]

Adding Printers in NetWare AXIS 1650 User’s Manual 37 Enable IPP Access In the Manage Printer main page, click the Client Support ta b. To enable IPP access, check Enable IPP access , click Apply and OK . Make the Newly Created Printer Available (Optional) Using the iPrint Map Designer tool, you can quickly make the newly printer available and ac[...]

Adding Printers in NetWare 38 AXIS 1650 User’s Manual Installing the Printer Locally The printer is now accessible all over the network and will be automatically installed on any client when needed. In the HTML-page just cr eated, double-click th e new printer icon. A dialogue box will appear, waiting for confirmation: Click OK to start installat[...]

Adding Printers in NetWare AXIS 1650 User’s Manual 39 Manual Installation of the Printer Locally In case you need to install the prin ter locally, use Windows’ Add Printer Wizard in the usual manne r: 1. Ensure that iPrint Client is installed. 2. Start | Printers and Faxes | Add a printer . 3. Select Network printer an d Browse for a prin ter. [...]

Print Server Management and C onfiguration 40 AXIS 1650 User’s Manual Section 8 Print Server Management and Configuration The management and configuration t ools that are supported by the AXIS 1650 allow you to: • Change print server parameters • Receive extended info rmation about print jobs • Receive printer port status and monitor printe[...]

Print Server Managem ent and Configuration AXIS 1650 User’s Manual 41 Accessing the Web Pages Follow these steps to access th e AXIS 1650 embedded Web pages: 1. Enter the print server’s IP address (or host name) in the Location/Address field of your Web browser. Press Enter 2. The Printer Overview page will appear and you will be i n ordinary U[...]

Print Server Management and C onfiguration 42 AXIS 1650 User’s Manual Services Availa ble from the User Mode The following services are av ailable from the User mode. A click on the question mark will open the print server’s help pages. Click on the Axis logotype t serve811mD0.001 Axis’ home page.[...]

Print Server Managem ent and Configuration AXIS 1650 User’s Manual 43 Print Jobs Select Print Jobs to view Printer Usage, showing the accumulated usage of the printer connected to your prin t server. The Printer Usage log is erased each time the pr int server is restarted. • Printer - shows the printer model. • Port - shows the port to which [...]

Print Server Management and C onfiguration 44 AXIS 1650 User’s Manual Services Availa ble from the Admin Mode Click on the Axis logotype to reach Axis’ home page. A click on the question mark will open the print server’s help pages. The following services are av ailable from the Admin mode. This Print Server This page contains a section that [...]

Print Server Managem ent and Configuration AXIS 1650 User’s Manual 45 Printer Page By clicking the printer ic on on the This Print Server page, a Printer page opens, allowing you to view the stat us and the supported capabilities of the connected printer. On some printer models, you can also print a test page from the Printer page. Note: It is on[...]

Print Server Management and C onfiguration 46 AXIS 1650 User’s Manual Network Settings From the Network Settings page you can set all parameters that control the network traffic to and from the AXIS 1650. You can enable or disable any of the supported network protoc ols and fine-tune the parameters. Changing Network Settings T o change the print [...]

Print Server Managem ent and Configuration AXIS 1650 User’s Manual 47 Setting General Parameters To change the print server’s general parameters, select Admin | General Settings => Change in the Web interface. Note: All print server settings have default values that have been carefully selected by Axis. In most inst ances, there is no need t[...]

Print Server Management and C onfiguration 48 AXIS 1650 User’s Manual Setting Restrictions To change print server permissi ons and restrictions, select Admin | General Settings => Change and select the Restrictions tab in the Web interface. TCP Restriction En abled When set to Yes , users specified in the IP A ddress List are rejected or accep[...]

Print Server Managem ent and Configuration AXIS 1650 User’s Manual 49 using the SLP protocol. Default = Accept SLP Restriction IP Address List Users specified here are rejected or ac cepted.IP addresses or ranges of IP addresses can be specified as follows: Example IP addresses: 10.13.16.150, 10.1 3.16.151 Example IP address range: 10.13.16.160-1[...]

Print Server Management and C onfiguration 50 AXIS 1650 User’s Manual anticipates that there is a router av ailable that automatically sens es and redirects the print server's packets to destinations outside the local network segment. Default value: 0.0.0.0 DHCP Enabled Set to Yes to enable DHCP (Dynamic Host Configuration Protocol). DHCP au[...]

Print Server Managem ent and Configuration AXIS 1650 User’s Manual 51 print server. Default = <blank> Scope ID Specify the NetBIOS scope to which the print server belongs. The scope ID is a character string value that is ap pended to the Net BIOS name and used for all NBT communication. The scope ID defines a group of computers that recogni[...]

Print Server Management and C onfiguration 52 AXIS 1650 User’s Manual Print Server Management Using FTP Having assigned an IP address to your AXIS 1650, as described in “Set the IP Address” on page 11, you can change the AXIS 1650 parameter settings using the File Tr ansport Protocol (FTP). Editing the config file Follow the instructions belo[...]

Print Server Managem ent and Configuration AXIS 1650 User’s Manual 53 Print Server Mana gement Us ing SNMP You can use SNMP (Simple Network Management Protocol) to monitor and configure the AXIS 1650 remotely. All major functions for print servers are supported. General Information SNMP refers to a set of standards for network management, includi[...]

Scanning wit h AXIS 1650 54 AXIS 1650 User’s Manual Section 9 Scanning with AXIS 1650 If your Canon device also functions as a scanner, you can use your AXIS 1650 as a scanner server, too. This section describes how to scan via an AXIS 1650 using AXIS ScanClient . For general information on scanning, see your Canon device manual. The examples her[...]

Scanning with AXIS 1 650 AXIS 1650 User’s Manual 55 3. Installation is about to begin. Click [Next]. 4. Read and accept the License Agree m ent. Click [Nex t]. 5. Select D estination Lo cation (default location is C:Program FilesAXIS CommunicationsAXIS ScanClient). Click [Next]. 6. Select Start Menu Folder (default folder is AXIS ScanClient). [...]

Scanning wit h AXIS 1650 56 AXIS 1650 User’s Manual Using AXIS ScanClient Connect to the Scanner 1. Start AXIS ScanClient (Start | AXIS ScanClient). The client will search the network for scanning devices. Mark the one you would like to use by clicking on it in the list (you can al so select a scanner by entering its IP address). Click [Connect].[...]

Scanning with AXIS 1 650 AXIS 1650 User’s Manual 57 1. On your computer, start the receiving program (e.g. Canon MF Toolbox — Scan Function ). Click [Save] to open the Save dialog. 2. In the Save dialog, click [Start] t o start scanning. 3. When ready, close the Save dialog and the Canon MF Toolbox. 4. Disconnect from the scanner - see pa ge 56[...]

Scanning wit h AXIS 1650 58 AXIS 1650 User’s Manual 4. Right-click the device you would like to use (example: WIA Canon MF3110) and select Get pi cture using Scanner Wizar d . 5. The Scanner and Camera Wizard starts. Click [Next]. 6. Select scanning paramete rs and start scanning. 7. When scanning is ready, disconnect from the scanner - see page [...]

Scanning with AXIS 1 650 AXIS 1650 User’s Manual 59 3. Select File | Acquire | TWAIN... 4. Select source (e.g. MF3110). 5. Select scanning paramete rs and start scanning. 6. When scanning is ready, disconnect from the scanner - see page 56 and remove the scanned object from the flatb ed. Invoking a Scan from the Canon Device First time only : Pre[...]

Scanning wit h AXIS 1650 60 AXIS 1650 User’s Manual 5. Select Events and select the event Canon MF3110 Scan Button . Under Actions , select the option Start th is program and select MF ToolBox Ver4.7 in the list. Click [OK]. Now you have prepared your computer to automatically take care of scannings invoked from the Canon device. Start a Scan fro[...]

The Test Button AXIS 1650 User’s Manual 61 Section 10 The Test Button Factory Default The test button is located on the front right hand si de of the print server and is used to perform a Factory Default: 1. Remove the power adapter to switch off the print server. 2. Press and hold down the test butto n, while you reconnect the power adapter. 3. [...]

Upgrading the Firmware 62 AXIS 1650 User’s Manual Section 11 Upgrading the Firmware The print server’s firmware is stored in its Flash memory. This memory retains its data content e ven after the power is removed. Flash memory allows data to be erased and re-w ritten, which is why you can install firmware updates in your print server as they be[...]

Upgrad ing the Fi rmware AXIS 1650 User’s Manual 63 5. Type dir and press Enter. The Axis directory you have created will display a list of all files. 6. Connect to th e print server using ft p: Type ft p 10.13.4.105 (this example uses print se rver IP address 10.13.4.105) 7. Enter the user name, the default user is root (if the default password [...]

Enabling Unicast Network Communication 64 AXIS 1650 User’s Manual Section 12 Enabling Unicast Network Communication AXIS CAPT Print Monitor uses broadc ast communication, so that status information from the print server ca n be shared between several users without elevating network traffic. Broadcast communication is used by default in the print [...]

Enabling Unicast Network Comm unication AXIS 1650 User’s Manual 65 7. Locate the parameter named USE_IP_PORT_NAME: type YES 8. Once the editing is complete, save the file as config 9. In the Command prompt window, upload the configuration file to the AXIS 1650 by typing put config CONFIG 10. To exit FTP, ty pe quit Go on to Install the AXIS CAPT [...]

Enabling Unicast Network Communication 66 AXIS 1650 User’s Manual Install AXIS CAPT Print Monitor 1. Install AXIS CAPT Print M onitor software on your workstation. The software is available on the AXIS 1650 CD and on www.axis.com. Click your way through the program. 2. During the software setup, you will reach the Set the Unicast Communication M [...]

Enabling Unicast Network Comm unication AXIS 1650 User’s Manual 67 7. A pop-up window will app ear. Enter the IP address of the AXIS 1650. 8. Select Manufacturer and Printer from the driver list. Click Next . 9. Choose whether you want to keep the existing driver or to replace it. If you already have the printer’s driver insta lled, you will be[...]

Internet Connection Firewall in Windows XP SP2 68 AXIS 1650 User’s Manual Section 13 Internet Connection Firewall in Windows XP SP2 If you have upgraded to Windows XP SP2, you need to open UDP port 10260 in the Internet Connection Firewall when using Broadcast communication. For Unicast comunica tion, the firewall can remain closed. To open the I[...]

Internet Connection F irewall in Windows XP S P2 AXIS 1650 User’s Manual 69 4. Click Exceptions and highlight AXIS CAPT Port . 5. Click OK . Note: If you accidentally delete the AX IS CAPT Port and want to recreate it, go to Exceptions | Add Port and configure the port.[...]

Technical Specifications 70 AXIS 1650 User’s Manual Section 14 Technical Specifications Supported De vices AXIS 1650 is developed to network Ca non printers and multifunctional products. If your Canon device also functions as a scan ne r, you can use your AXIS 1650 as a scanner server, too. AXIS 1650 supports Cano n Ad vanced Printing T echnology[...]

Technical Specifications AXIS 1650 User’s Manual 71 Power Consumption Maximum 5.6 W. Power provided by Power Adapter type PS-H: 5.1V DC 2 000 mA Dimensions Height x Width x Depth 1.1in (29 mm), 2.4in (62 mm), 4.6in (117 mm) Weight 0.18lb (81g) Environmental Temperature 40 - 105 °F (5 - 40 °C) Approvals EMC EN 55 024:1998 EN 55 022:1998 + A1 (CI[...]

Index 72 AXIS 1650 User’s Manual A Adhesive Clip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Adhesive Holder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Admin mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

Index AXIS 1650 User’s Manual 73 H Help . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43 Host Name . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 , 16 I IEEE 1284 parallel port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Index 74 AXIS 1650 User’s Manual Network Statistic . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 P Parameter List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44 password . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

Index AXIS 1650 User’s Manual 75 SNMP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53 SNMP access enabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 SNMP Restriction Enabled . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]