Vai alla pagina of
Manuali d’uso simili
-
Camcorder
Canon HG10
118 pagine 7.55 mb -
Camcorder
Canon Vixia HF M50
246 pagine -
Camcorder
Canon HFR106
172 pagine 6.19 mb -
Camcorder
Canon PowerShot G10
23 pagine 0.6 mb -
Camcorder
Canon UC X 10Hi
58 pagine 4.15 mb -
Camcorder
Canon MD140
94 pagine 5.28 mb -
Camcorder
Canon XM2 PAL
159 pagine 3.69 mb -
Camcorder
Canon 30
166 pagine 4.24 mb
Un buon manuale d’uso
Le regole impongono al rivenditore l'obbligo di fornire all'acquirente, insieme alle merci, il manuale d’uso Canon PC941. La mancanza del manuale d’uso o le informazioni errate fornite al consumatore sono la base di una denuncia in caso di inosservanza del dispositivo con il contratto. Secondo la legge, l’inclusione del manuale d’uso in una forma diversa da quella cartacea è permessa, che viene spesso utilizzato recentemente, includendo una forma grafica o elettronica Canon PC941 o video didattici per gli utenti. La condizione è il suo carattere leggibile e comprensibile.
Che cosa è il manuale d’uso?
La parola deriva dal latino "instructio", cioè organizzare. Così, il manuale d’uso Canon PC941 descrive le fasi del procedimento. Lo scopo del manuale d’uso è istruire, facilitare lo avviamento, l'uso di attrezzature o l’esecuzione di determinate azioni. Il manuale è una raccolta di informazioni sull'oggetto/servizio, un suggerimento.
Purtroppo, pochi utenti prendono il tempo di leggere il manuale d’uso, e un buono manuale non solo permette di conoscere una serie di funzionalità aggiuntive del dispositivo acquistato, ma anche evitare la maggioranza dei guasti.
Quindi cosa dovrebbe contenere il manuale perfetto?
Innanzitutto, il manuale d’uso Canon PC941 dovrebbe contenere:
- informazioni sui dati tecnici del dispositivo Canon PC941
- nome del fabbricante e anno di fabbricazione Canon PC941
- istruzioni per l'uso, la regolazione e la manutenzione delle attrezzature Canon PC941
- segnaletica di sicurezza e certificati che confermano la conformità con le norme pertinenti
Perché non leggiamo i manuali d’uso?
Generalmente questo è dovuto alla mancanza di tempo e certezza per quanto riguarda la funzionalità specifica delle attrezzature acquistate. Purtroppo, la connessione e l’avvio Canon PC941 non sono sufficienti. Questo manuale contiene una serie di linee guida per funzionalità specifiche, la sicurezza, metodi di manutenzione (anche i mezzi che dovrebbero essere usati), eventuali difetti Canon PC941 e modi per risolvere i problemi più comuni durante l'uso. Infine, il manuale contiene le coordinate del servizio Canon in assenza dell'efficacia delle soluzioni proposte. Attualmente, i manuali d’uso sotto forma di animazioni interessanti e video didattici che sono migliori che la brochure suscitano un interesse considerevole. Questo tipo di manuale permette all'utente di visualizzare tutto il video didattico senza saltare le specifiche e complicate descrizioni tecniche Canon PC941, come nel caso della versione cartacea.
Perché leggere il manuale d’uso?
Prima di tutto, contiene la risposta sulla struttura, le possibilità del dispositivo Canon PC941, l'uso di vari accessori ed una serie di informazioni per sfruttare totalmente tutte le caratteristiche e servizi.
Dopo l'acquisto di successo di attrezzature/dispositivo, prendere un momento per familiarizzare con tutte le parti del manuale d'uso Canon PC941. Attualmente, sono preparati con cura e tradotti per essere comprensibili non solo per gli utenti, ma per svolgere la loro funzione di base di informazioni e di aiuto.
Sommario del manuale d’uso
-
Pagina 1
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU JAPON) REVISION 0 FY8-13GA-000 AUG. 1999 PC860 F13-8491 TY A00001- PC880 F13-8291 TZA00001- PC890 F13-8242 U AA00001- PC920 F13-8431 TVB00001- F13-8441 PUD00001- PUE00001- F13-8461 PUH00001- PC921 F13-8432 TVC00001- PC940 F13-8436 TVD00001- PC941 F13-843[...]
-
Pagina 2
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME A U JAPON) IMPORT ANT THIS DOCUMENT A TION IS PUBLISHED BY CANON INC ., J AP AN, T O SER VE AS A SOURCE OF REFERENCE FOR W ORK IN THE FIELD . SPECIFICA TIONS AND OTHER INFORMA TION CONT AINED HEREIN MA Y V AR Y SLIGHTL Y FROM A CTUAL MA CHINE V ALUES OR THOS[...]
-
Pagina 3
COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) i This service manual has been prepared for the PC800/900 Series machines, providing basic information used for servicing the machines in the field so as to ensure their quality and performance. This service manual consists of the following chapte[...]
-
Pagina 4
COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) ii The following rules apply throughout this Service Manual: 1. Each chapter contains sections e xplaining the pur pose of specific functions and the relationship between electrical and mechanical systems with reference to the timing of operation.[...]
-
Pagina 5
COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) iii Model PC860 PC880 PC890 PC920 PC920 PC920 PC920 PC921 PC940 PC941 PC950 PC950 PC950 PC960 PC980 PC981 Type code TYA TZA UAA PUD PUE PUH TVB TVC TVD TVE PUF PUG TVF TVG TVH TVJ Multi- feeder √ √ √ √ √ √ √ √ Single feeder √ √[...]
-
Pagina 6
COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) iv[...]
-
Pagina 7
COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) v CONTENTS CHAPTER 1 GENERAL DESCRIPTION CHAPTER 2 BASIC OPERATION CHAPTER 3 EXPOSURE SYSTEM I . FEA TURES .................................. 1-1 I I. SPECIFICA TIONS ....................... 1-2 A . Copier .................................... 1-2 [...]
-
Pagina 8
COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) vi CHAPTER 4 IMAGE FORMATION SYSTEM CHAPTER 5 PICK-UP/FEEDING SYSTEM I. IMAGE FORMA TION SYSTEM ... 4-1 A. Outline ................................... 4-1 B. Timing Char t f or the Image F or mation System ................. 4-3 C . Controlling the[...]
-
Pagina 9
COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) vii CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS CHAPTER 9 INSTALLATION CHAPTER 10 MAINTENANCE AND SERVICING CHAPTER 8 ADF I. F ANS ............................................ 7-1 II. POWER SUPPL Y SYSTEM ......... 7-3 A. Outline of the P ower Supply[...]
-
Pagina 10
COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) viii APPENDIX CHAPTER 11 TROUBLESHOOTING I. MAINTENANCE AND INSPECTION ............................ 11-3 A. Image Adjustment Basic Procedure ........................... 11-3 B. P oints to Note f or Ser vicing ............................ 11-4 II. [...]
-
Pagina 11
COPYRIGHT © 1999 CANON INC. CANON PC800s/900 s R EV . 0 AU G. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) CHAPTER 1 GENERAL DESCRIPTION This chapter provides specifications of the machine, instructions on how to operate the machine, and an outline of copying process. I . FEA TURES .................................. 1-1 I I. SPECIFICA TIONS ........[...]
-
Pagina 12
[...]
-
Pagina 13
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 1-1 I. FEATURES 1. Personal Copier with a Zoom Function and a Fixed Copyboard • You can choose either a default enlargement/reduction ratio or any ratio between 70% and 141% in 1% increments. 2. Ecology-Conscious • Th[...]
-
Pagina 14
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 1-2 II. SPECIFICATIONS A. Copier 1. Type Descriptions Desk top Fixed Halogen lamp (80 V/110 W for 120V-model; 150 V/160 W for 220/240 V-model) Fixed focal point lens OPC drum (24-mm dia.) Item Body Copyboard Source of[...]
-
Pagina 15
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 1-3 3. Performance Descriptions Sheet, book, 3-D object (2kg max.) A4 (297 × 210 mm)/LGL (216 × 356 mm) Inch/AB-configuration: 2R2E Inch-configuration: 3R1E 70% to 141% (in 1% increments *1 ) 0 sec (at 20°C room temper[...]
-
Pagina 16
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 1-4 *1. Applies only to models with a zoom function. *2. Applies only to single pickup if the multifeeder is used. *3. Applies only to vertical feeding. *4. Upon delivery, be sure to remove each from the copy tray. *5[...]
-
Pagina 17
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 1-5 4. Others Descriptions 7.5°C to 32.5°C/44.5°F to 90.5°F 5% to 85% RH 607.95 to 1013.25 hPa (0.6 to 1 atm) 120 V 60 Hz 220/240 V 50 Hz, 60 Hz TVBxxxxx PUDxxxxx PUHxxxxx TVCxxxxx PUExxxxx TVDxxxxx PUFxxxxx TVExxxxx [...]
-
Pagina 18
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 1-6 5. Default Ratios Table 1-205 2R2E (Inch/AB-configuration) 1:1.000 1:0.707 1:0816 1:1.154 1:1.414 Item Direct Reduce I Reduce II Reduce III Reduce IV Enlarge I Enlarge II 3R1E (Inch-configuration) 1:1.000 1:0.707 [...]
-
Pagina 19
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 1-7 6. Copying Speed Table 1-206 *1. The number of copies starting with the pickup operation that follows the delivery of the 19th copy in a continuous copying job. (See p.5-8) The specifications are subject to change for[...]
-
Pagina 20
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 1-8 B. ADF Table 1-207 Descriptions Auto pickup/delivery Face-down Center reference Top separation Single-sided (50 to 128 g/m 2 ) A5 (STMT) to A4R (LTRR), LGL Length: 139.7 to 355.6 mm (feeding direction) Width: 139.[...]
-
Pagina 21
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 1-9 *1. The following may not be used as an original: • Sheet with a staple, clip, or glue. • Sheet with a cut, hole, or tear. • Sheet with holes for binding. • Sheet with a carbon back. • Sheet with a cut-and-p[...]
-
Pagina 22
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 1-10 [1] Copy tray [2] Power cord connector [3] Open/close lever [1] Copyboard cover [2] Static eliminator cleaner [3] Manual feed tray [4] Right door [5] Cassette [6] Copyboard glass [4] Static eliminator [5] Copy de[...]
-
Pagina 23
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 1-11 [1] ADF [2] Manual feed tray [3] Right door [1] Static eliminator cleaner [2] Delivery guide plate [3] Copy tray [4] Power cord connector [4] Cassette [5] Copyboard glass [5] [4] [2] [3] [1] [5] Open/close lever [6] [...]
-
Pagina 24
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 1-12 [1] [4] [3] [2] 3. ADF Figure 1-305 [1] Original tray [2] Original delivery tray [3] Slide guide [4] Auxiliary tray[...]
-
Pagina 25
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 1-13 [1] No. 3 mirror [2] No. 2 mirror [3] No. 1 mirror [4] Scanning lamp [5] Heat exhaust fan [6] Copyboard glass [7] Side blanking lamp [8] Lens [9] Primary charging roller [10] No. 6 mirror [11] Cartridge [12] No. 4 mi[...]
-
Pagina 26
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 1-14 [1] Delivery roller [2] Copy tray [3] Pickup roller 2 [4] Pickup roller 1 [5] Copyboard tray [6] Auxiliary tray [7] Guide plate [8] Separation pad [9] Registration roller [10] Feed belt drive roller [11] Feed bel[...]
-
Pagina 27
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 1-15 Description Adjusts the density of copies manually. Indicates the selected copy den- sity mode. Indicates the selected default ra- tio. Indicates the selected cassette/ manual feed tray.If there is no paper loaded, i[...]
-
Pagina 28
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 1-16 Description No. Remarks Name 10 11 12 13 14 15 Count/zoom set key Zoom indicator *2 Zoom key *2 Paper selection key *1 Default ratio key Copy density mode selection key Sets the number of copies or a zoom ratio. [...]
-
Pagina 29
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 1-17 Zoom V. ROUTINE MAINTENANCE BY THE USER Instruct the user to clean the following if images tend to be soiled or copy paper tends to jam often. 1. Soiled Images a. Copyboard Glass/Copyboard Cover Clean the cover with [...]
-
Pagina 30
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 1-18 b.2 Cleaning by Hand 1) Wipe the feed belt with a moist cloth (water or mild detergent solution) in the direction of the arrow in the figure; then, dry wipe it. Figure 1-502 2. If Jams Occur Frequently a. Static [...]
-
Pagina 31
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 1-19 Figure 1-504 (ADF type) 2) Pull the open/close lever to open the machine. 3) Using the static eliminator cleaner, clean the static eliminator. • Brush out the paper lint or the like from the groove of the static el[...]
-
Pagina 32
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 1-20 Scanning lamp Copyboard glass Fixed focal point lens Side blanking lamp (front, rear) Developing blade Developing cylinder Primary charging roller Cleaning blade Transfer charging roller Static eliminator Fixing [...]
-
Pagina 33
CHAPTER 1 GENERAL DESCRIPTION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 1-21 The machine’s image formation process consists of the following seven steps: Step 1 Primary charging (AC + negative DC) Step 2 Image exposure Step 3 Development (AC + negative DC) Step 4 Transfer (negative DC) Step[...]
-
Pagina 34
[...]
-
Pagina 35
COPYRIGHT © 1999 CANON INC. CANON PC800s/900 s R EV . 0 AU G. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) CHAPTER 2 BASIC OPERATION This chapter provides descriptions on basic operations, functions of each operation, relationships between electrical and mechanical systems, and timing at which each associated part is turned on. Process speed 96 mm/s[...]
-
Pagina 36
[...]
-
Pagina 37
CHAPTER 2 B ASIC OPERA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 2-1 I. BASIC OPERATIONS A. Functional Construction The machine consists of four functional blocks: pickup/feeding system, exposure system, im- age formation system, and control system. Figure 2-101 Control system Control pa[...]
-
Pagina 38
CHAPTER 2 B ASIC OPERA TION COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 2-2 B. Outline of Electrical Circuitry The machine’s major electric mechanisms are controlled by the microprocessor mounted on the DC controller PCB, which reads input signals from sensors and operating keys according[...]
-
Pagina 39
CHAPTER 2 B ASIC OPERA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 2-3 C. Basic Sequence of Operations • A4R, Direct, 2 Copies, Continuous, Cassette I : Scanner home position detection I I : Lens home position detection Figure 2-103 Copy Start key Power switch ON ON STBY INTR AER SCFW Fo[...]
-
Pagina 40
CHAPTER 2 B ASIC OPERA TION COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 2-4 Table 2-101 STBY (standby) INTR (initial rotation) AER (AE rotation) SCFW (scanner forward) SCRV (scanner reverse) LSTR (last rotation) • From when he power switch is turned on to when the Copy Start key is presse[...]
-
Pagina 41
CHAPTER 2 B ASIC OPERA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 2-5 D. Controlling the Main Motor (M1) 1. Outline Table 2-102 shows the functions of the main motor control circuit, and Figure 2-104 is a block diagram of the circuit. Table 2-102 Figure 2-104 Composite power supply PCB DC[...]
-
Pagina 42
CHAPTER 2 B ASIC OPERA TION COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 2-6 2. Operations The main motor (M1) is a DC motor with a built-in clock pulse generator, which generates clock pulses (MMCLK) in relation to the rotation of the motor while the motor is rotating. The speed control cir[...]
-
Pagina 43
CHAPTER 2 B ASIC OPERA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 2-7 E. Inputs to and Outputs from the DC Controller 1. Inputs to the DC Control (1/2) Figure 2-105 PS1 PS2 PS3 TH1 TH2 J101-1 -3 -2 J109-11 -10 -9 J102-7 -9 -8 J132-3 -5 -4 J108-4 -3 -5 J102-1 -6 J131-1 -2 SCHP LHP DPD DIG3[...]
-
Pagina 44
CHAPTER 2 B ASIC OPERA TION COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 2-8 2. Inputs to the DC Controller (2/2) Figure 2-106 When the light reflected by the original increases, the voltage increases. J107-4 -3 -2 -1 +24V The variation in the resistance of the fixing heater is corrected in [...]
-
Pagina 45
CHAPTER 2 B ASIC OPERA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 2-9 3. Outputs from the DC Controller (1/2) Figure 2-107 J201-2 -1 DC controller PCB Composite power supply PCB Noise filter +24V HVT board High- voltage circuit block Micro- processor DS1 Door switch Transformer Line filte[...]
-
Pagina 46
CHAPTER 2 B ASIC OPERA TION COPYRIGHT © 1999 CANON INC. CANON PC800s /900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 2-10 4. Outputs from the DC Control PCB (2/2) Figure 2-108 J109-8 -7 J132-2 -1 J130-1 -2 J109-4 -3 J109-6 -5 J109-2 -1 Pickup clutch solenoid Registration clutch solenoid Multifeeder pickup solenoid (Multifeeder type on[...]
-
Pagina 47
CHAPTER 2 B ASIC OPERA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV.0 AUG. 1999 PRINTED IN JAPAN (IMPRIME AU JAPON) 2-11 5. Inputs to and Outputs from the ADF Figure 2-109 Composite power supply PCB +24V +5V +5V +24V J114-1 -2 REQ -3 -4 ACK -5 -6 TXD -7 -8 -8 -7 -6 -5 -4 -3 -2 -1 RXD DC controller PCB See Chapter 8. To the ADF -4 -3 -2 -[...]
-
Pagina 48
[...]
-
Pagina 49
COPYRIGHT © 1999 CANON INC. CANON PC800s/900 s R EV . 0 AU G. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) CHAPTER 3 EXPOSURE SYSTEM This chapter discusses the principles of operation used for the machine's lens drive unit and scanner drive unit. It also explains the timing at which these drive units are operated, and shows how they may be disa[...]
-
Pagina 50
[...]
-
Pagina 51
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-1 Item Lamp Scanning Scanner position detection Ratio variation Lens drive control Scanner drive control Protective function Description Halogen By moving the No. 1 mirror mount By a sensor (scanner home position sensor;[...]
-
Pagina 52
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-2 Figure 3-102 Direct Optical length Reduction Optical length Enlargement Optical length Optical length: L1 < L2, L1 < L3 L3 L2 L1 F F F F' F' F' B. Varying the Reproduction Ratio The reproduction rat[...]
-
Pagina 53
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-3 Figure 3-103 Lens home position sensor (PS2) Lens shift detecting shaft for side blanking lamp Lens unit Reduction Scanner/lens drive motor (M2) No. 4/5 mirror unit Top View Switching gear While the lens is moving Lens[...]
-
Pagina 54
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-4 Figure 3-104 J101-1 M2 PS1 Light-blocking plate Scanner home position signal (SCHP) Scanner home position sensor (PS1) J110-1 SC_COM -2 SC_B* -3 SC_B -4 SC_COM -5 SC_A* -6 SC_A Q109 Motor driver circuit DC controller PC[...]
-
Pagina 55
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-5 Description • Provides a means of reference for determining forward movement distance. • Stops the scanner moving in re- verse in 0.1 sec. Scanner sensor PS1(scanner home position sensor) Signal SCHP Scanner Forwar[...]
-
Pagina 56
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-6 Figure 3-106 Switching to 6-cpm copying speed SCRV SCFW SCRV SCFW SCRV SCFW SCRV LSTR STBY Check timing by thermistor (TH2) Main motor (M1) Registration clutch solenoid (SL2) Scanner Pickup clutch solenoid (SL1) II I 37[...]
-
Pagina 57
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-7 Current switching signal 1 Current switching signal 2 Current switching signal 3 (Q101) (Q109) DC controller PCB A A* B B* SC-COM SC-COM J110 SC-A SC-A* SC-B SC-B* M2 Motor driver circuit +24VU R399 Microprocessor 5. C[...]
-
Pagina 58
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-8 b. Operations The microprocessor (Q101) mounted on the DC controller PCB receives instructions from the control panel PCB copying mode settings (e.g., reproduction ratio). In response, it applies drive pulses to the sca[...]
-
Pagina 59
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-9 Figure 3-201 (Q101) Serial communication VR107 DC controller PCB Microprocessor (Q900) Intensity adjustment signal PWM_1KHz Lamp activation signal LAMP_ON Activation detection signal LAMP_DETECT Composite power supply [...]
-
Pagina 60
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-10 2. Operations a. Turning On/Off the Scanning Lamp The DC controller PCB and the composite power supply exchange signals in serial communi- cation to control the scanning lamp. According to the scanner lamp active volta[...]
-
Pagina 61
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-11 Figure 3-202 c. Monitoring the Activation of the Scanning Lamp The activation detection signal (LAMP_DETECT) is sent to the microprocessor (Q900) on the composite power supply PCB as long as the scanning lamp remains [...]
-
Pagina 62
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-12 III. DISASSEMBLY/ASSEMBLY As needed, disassemble/assemble the machine with the following in mind: 1. ! Before starting the work, turn off the power switch and disconnect the power plug for safety. 2. Unless otherwise i[...]
-
Pagina 63
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-13 Figure 3-301 Figure 3-302 [1] [1] [2] [3] A. Scanner Drive Assembly 1. Removing the Scanner/Lens Drive Motor 1) Remove the front lower cover. (See Chapter 7.I I I .A.2.“Removing the Front Lower Cover.”) 2) Remove [...]
-
Pagina 64
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-14 Figure 3-303 Figure 3-304 [4] [4] [5] 5) Open the machine’s top unit farther, and hold it in position using the handle (about 30 mm in diameter) of a screwdriver. 6) Remove the machine’s two fixing screws [4] from [...]
-
Pagina 65
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-15 Figure 3-305 [6] [7] [5] Lift. 7) Free the top unit (by removing the screw- driver), and close the top unit. 8) Remove the E-ring [6]; then, lift the cable drive pulley [7] slightly, and detach the scanner/lens drive [...]
-
Pagina 66
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-16 Figure 3-306 Wind 1.5 times. (blac k cable) Wind 7.5 times. (silver-colored cab le) 2. Outline of the Scanner Drive Cable[...]
-
Pagina 67
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-17 Figure 3-307 Figure 3-308 [1] 3. Routing the Scanner Drive Cable a. Before Starting the Work Prepare the following: • Mirror positioning tool • Cable clip • Adhesive tape 1) Set the mirror positioning tool as sh[...]
-
Pagina 68
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-18 Figure 3-309 Figure 3-310 [2] [2] [4] [2] [2] [3] [3] [5] [4] [5] 5) If the machine is equipped with an ADF, free the hook [2], and disconnect the two relay connectors [3] from the left upper stay [4]. 6) Remove the th[...]
-
Pagina 69
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-19 Figure 3-311 [6] [6] [7] 7) Remove the four screws [6], and detach the lens cover [7].[...]
-
Pagina 70
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-20 Figure 3-313 Figure 3-312 [2] Shorter end Longer end [1] Face with a marking [1] [3] Top View [3] b. Routing the Reversing Cable 1) Wind the reversing cables (silver-colored) [2] on the cable drive pulley [1] 7.5 times[...]
-
Pagina 71
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-21 Figure 3-314 Figure 3-315 [5] Hook (front) [1] [4] [7] [6] 2) Put the cable drive pulley [1] into the shaft [4], and secure it in position with an E- ring [5]. When putting the cable drive pulley into the shaft, be su[...]
-
Pagina 72
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-22 Figure 3-317 Figure 3-316 [10] [11] [6] [8] [9] Figure 3-318 [6] [12] [13] [14] [15] 4) Lead the shorter end [6] under the No. 1 mirror mount [8] and the No. 2/3 mirror mount [9]; then, hook it on the left rear pulley [...]
-
Pagina 73
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-23 Figure 3-319 Figure 3-320 [8] [17] [9] [16] [14] [18] [19] [14] 7) Lead the longer end [14] under the No. 1 mirror mount [8] and the No. 2/3 mirror mount [9]; then, hook it on the pulley [16] on the left front side an[...]
-
Pagina 74
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-24 Figure 3-322 Figure 3-321 Figure 3-323 [4] [3] [2] [1] Face without a marking [5] [1] [6] [5] [7] [8] [9] c. Routing the Forwarding Cable 1 ) Fit the longer end forwarding cable (black) [2] on the top hook of the cable[...]
-
Pagina 75
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-25 Figure 3-324 Figure 3-326 Figure 3-325 [5] [10] [11] [3] [7] [9] [3] [12] 4) Hook the end of the longer end [5] on the hole [10] on the right side. 5) Free the shorter end [3], and hook it on the pulley [11] on the ri[...]
-
Pagina 76
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-26 Figure 3-327 Figure 3-328 [3] [13] [14] [3] [15] [5] 7) Hook the end of the shorter end [3] on the hole [13] on the right side. 8) Free the shorter end [3] and the longer end [5] (reversing cable), and connect both wit[...]
-
Pagina 77
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-27 Figure 3-329 [1] [16] 9) Detach the pulley clip [16] from the cable drive pulley [1].[...]
-
Pagina 78
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-28 Figure 3-330 (rear) Figure 3-331 (front) [1] [2] [1] [2] d. Positioning the No. 1 Mirror Mount 1) Fix the rear and the front of the No. 1 mir- ror mount [1] temporarily to the metal fix- ing [2] of the forwarding cable[...]
-
Pagina 79
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-29 Figure 3-332 (rear) Figure 3-333 (front) [4] [3] [3] [3] [3] 2) Turn the cable drive pulley [4] so that the three shafts [3] of the mirror positioning tool for rear and front is as shown.[...]
-
Pagina 80
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-30 Figure 3-334 (rear) Figure 3-335 (front) [1] [1] 3) While keeping the condition of step 2), tighten the positioning screw on the rear and front of the No. 1 mirror mount [1].[...]
-
Pagina 81
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-31 Figure 3-336 [1] [1] [2] B. Lens Drive Assembly 1. Removing the Lens Cable 1 ) Turn on the power; when the lens has moved to the Direct position, disconnect the power plug. 2) Remove the copyboard glass. (See Chapter [...]
-
Pagina 82
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-32 Figure 3-337 Figure 3-338 [3] Marking [4] [5] [6] 5) Mark the position of the lens cable fixing plate [3] and the lens mount [4] with a scriber. Caution: When routing the lens cable, be sure to refer to the marking mad[...]
-
Pagina 83
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-33 Figure 3-341 Figure 3-339 Figure 3-340 [7] [8] [6] [9] [10] 7) Remove the screw [7], and detach the cam gear [6] and the cable retainer [8]. 8) Holding the middle of the No. 1 mirror mount [9], move it to the center o[...]
-
Pagina 84
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-34 Figure 3-342 Figure 3-343 [11] [12] [13] [12] 10) Remove the screw [11], and detach the lens cable fixing plate [12]. 11 ) Free the lens cable [13] from the lens cable fixing plate [12]; then, detach the lens cable fro[...]
-
Pagina 85
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-35 Figure 3-344 Figure 3-345 [2] [1] [1] [2] [3] 2. Routing the Lens Cable 1) After routing the lens cable, keep the lever [1] of the No. 4/5 mirror mount disen- gaged from the cam gear [2] (so that the lever will not co[...]
-
Pagina 86
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-36 Figure 3-346 [4] [2] [1] 4) If the tip of the lever [1] and the marking on the cam gear [2] do not match, remove the fixing screw [4] of the cam gear [2] and detach the cam gear; then, mount the cam gear once again so [...]
-
Pagina 87
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-37 Figure 3-347 Figure 3-348 [1] [2] [3] [4] [5] C. Exposure System 1. Removing the Scanning Lamp 1) Disconnect the power plug. 2) Remove the copyboard glass. (See Chapter 7.I I I.C.1. “Removing the Copyboard Glass.”[...]
-
Pagina 88
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-38 Figure 3-349 [7] [6] 5) While pushing the electrode mount [6] found at the rear of the machine in the di- rection of the arrow, detach the scanning lamp [7]. Caution: 1. Do not start the work if the scanning lamp is ho[...]
-
Pagina 89
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-39 Figure 3-350 Logo mark Scanning lamp 45 (approx.) (mirror mount moving in re verse) (front) 2. Points to Note When Mounting the Lamp When mounting the scanning lamp, be sure that the logo mark (or the name of the manu[...]
-
Pagina 90
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 3-40 Figure 3-351 Figure 3-352 [1] [2] (front) Thermal fuse Reflecting plate 3. Removing the Thermal Fuse 1) Disconnect the power plug. 2) Remove the copyboard glass. (See Chapter 7.I I I.C.1.“Removing the Copyboard Glass[...]
-
Pagina 91
CHAPTER 3 EXPOSURE SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 3-41 5. Removing the Thermistor Unit 1) Remove the top cover. (See Chapter 7.I I I.A.1. “Removing the Top Cover.”) 2) Disconnect the connector (J131) [1] from the DC controller PCB; remove the screw [2], and detach the[...]
-
Pagina 92
[...]
-
Pagina 93
COPYRIGHT © 1999 CANON INC. CANON PC800s/900 s R EV . 0 AU G. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) CHAPTER 4 IMAGE FORMATION SYSTEM This chapter discusses the principles of how images are formed. It also explains the timing at which the various units involved in image formation are operated, and shows how they may be disassembled/assembled a[...]
-
Pagina 94
[...]
-
Pagina 95
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 4-1 Item Controlling the primary charging roller bias Transfer roller bias control Developing/separation static eliminator bias control Density control Blanking control Description AC constant current control, on/[...]
-
Pagina 96
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 4-2 Figure 4-101 Side blanking lamp Copyboard glass Scanning lamp AE sensor Developing cylinder Transfer roller High-voltage circuit block Lamp regulator block Q900 Microprocessor Q101 Microprocessor DC controller [...]
-
Pagina 97
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 4-3 Figure 4-102 Copy Start key ON STBY INTR SCFW forward SCFW SCRV Reverse -625V 3200V -400V 0.5sec.(approx.) LSTR STBY Main motor (M1) Scanning lamp (LA1) Primary AC bias Transfer bias Transfer cleaning bias Tra[...]
-
Pagina 98
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 4-4 C. Controlling the Primary Charging Roller Bias 1. Outline The circuit shown in Figure 4-103 is used to control the voltage applied to the primary charging roller, and has the following functions: • Turning o[...]
-
Pagina 99
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 4-5 Figure 4-103 Main transformer T101 PR_DC_ON J103 -4 J203 -5 PDC_PWM DC bias control signal PDC_S DC voltage monitor signal PAC_S AC component current monitor signal PAC_OUT AC bias output signal Amplifier Volt[...]
-
Pagina 100
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 4-6 DC bias ON signal (8-bit signal communication) bit0 bit1 1– 10 00 PR_DC_ON (J103-4) 0 1 1 DC bias ON (image area) DC bias ON (non-image area) DC bias OFF Table 4-102 Relationship between DC Bias Output and Si[...]
-
Pagina 101
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 4-7 Figure 4-104 Copy Start key ON STBY INTR SCFW SCFW SCRV LSTR STBY Main motor (M1) Scanning lamp (LA1) Primary AC bias Primary DC bias -400V -625V SCRV d. Switching the DC Bias Level The machine switches the DC[...]
-
Pagina 102
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 4-8 Figure 4-105 Main transf ormer T ransfer positiv e DC bias generation circuit T ransf er positive DC bias ON signal T_REV_ON* T101 T ransf er current detection signal T_FW_S Photo- sensitive drum T ransf er cha[...]
-
Pagina 103
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 4-9 T_REV_ON* signal 1 0 1 1 Negative transfer bias ON Positive transfer bias ON (cleaning bias) Transfer bias OFF ATVC Transfer bias ON signal (serial communication) bit2 bit3 10 11 00 01 T-FW_ON signal 1 1 0 1 2[...]
-
Pagina 104
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 4-10 STBY INTR SCFW SCFW SCRV LSTR STBY Main motor (M1) Reference bias (ATVC) Transfer bias SCRV 0.7sec (approx.) 0.8sec (approx.) Copy Start key ON 1.2sec (approx.) Cleaning bias 1.6sec(approx.) Figure 4-106 c. Co[...]
-
Pagina 105
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 4-11 E. Controlling the Developing/Separation Static Eliminator Bias 1. Outline The circuit shown in Figure 4-107 is used to control the voltage applied to the developing assembly and the separation static elimina[...]
-
Pagina 106
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 4-12 Figure 4-107 Main transf ormer T101 T201 +5V Photo sensitive drum Dev eloping cylinder Static eliminator Static eliminator bias generation circuit De veloping DC bias detection circuit + DC bias control signal[...]
-
Pagina 107
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 4-13 DC bias ON DC bias ON (- 500V) DC bias OFF Developing DCON signal (Serial communication) bit5 bit6 –1 01 00 DV_DC_ON (J103-3) 0 1 1 2. Turning On and Off the DC Bias The DC bias applied to the developing cy[...]
-
Pagina 108
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 4-14 Developing DC bias Voltage supplied to the scanning lamp Toner save mode -75V -2V *1 -3V *2 Photo mode +15V -2V *1 -3V *2 Figure 4-108 If the machine is not equipped with a density correction switch (SW101), t[...]
-
Pagina 109
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 4-15 Figure 4-111 (Non-SW101) Figure 4-112 (Non-SW101) Test sheet Newspaper Original density 0 -100 -200 -300 -400 -500 Developing bias DC component (V) AE Mode F1 F5 F9 1 6.5 0 -100 -200 -300 -400 -500 Developing[...]
-
Pagina 110
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 4-16 Figure 4-113 Scanning lamp +24V +24V +24V +24V +5V +5V VR102 VR103 J601 -3 J107 -2 AEREF AE -2 -3 - + - + - + - + Photo- sensitive drum Dev eloping cylinder (Q101) (Q900) Dev eloping DCON signal Serial communi[...]
-
Pagina 111
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 4-17 Figure 4-115 Copy Start key ON STBY INTR AER SCFW SCFW SCRV LSTR STBY Main motor (M1) Scanner / lens drive motor (M2) AE signal (AE) Scanning lamp (LA1) SCRV Figure 4-114 68.8mm (appro x.) 23.5mm (appro x.) 5[...]
-
Pagina 112
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 4-18 Figure 4-116 J104 J103 3. AE Adjustment (VR102, VR103) If you have replaced the scanning lamp or the AE sensor PCB, make adjustments as follows: Operating Procedure Before Starting the Work • Obtain a newspa[...]
-
Pagina 113
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 4-19 Figure 4-117 5) Place a newspaper on the copyboard, and close the copyboard cover. 6) Turn VR102 so that the reading in the indicator is from ‘A3’ to ‘Ad’. Figure 4-118 VR103 VR102 2) While keeping th[...]
-
Pagina 114
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 4-20 Figure 4-119 9) Repeat steps 5) through 8) so that the values of both VR102 and VR103 are target values. Caution: If you cannot set VR102 and VR103 to the target values at the same time, turn VR103 fully count[...]
-
Pagina 115
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 4-21 Figure 4-121 Figure 4-122 Reflecting plate Rear side blanking lamp Lens shift detecting shaft Front side blanking lamp Reflecting plate (front) AB Photosensitive drum Non-image area in Reduce mode A: Position[...]
-
Pagina 116
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 4-22 II. DISASSEMBLY/ASSEMBLY As needed, disassemble/assemble the machine with the following in mind: 1. ! Before starting the work, turn off the power switch and disconnect the power plug for safety. 2. Unless oth[...]
-
Pagina 117
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 4-23 Figure 4-201 a. Drum Cover Shutter If exposed to strong light for a long time, the photosensitive drum can develop photo memory, which can cause white spots or black bands on copies. To prevent photo memory, [...]
-
Pagina 118
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 4-24 2. Cleaning the Drum Caution: As a rule, do not touch or clean the photosensitive drum. 1) Open the machine's top unit, and take out the cartridge. 2) Turn over the cartridge, and open the drum cover shut[...]
-
Pagina 119
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 4-25 Figure 4-202 [1] [2] [2] [3] B. Transfer Charging Assembly 1. Removing the Transfer Charging Roller 1) Open the machine's top unit. 2) Remove the screw [1]. 3) While freeing the claw [2] of the bushing, [...]
-
Pagina 120
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 4-26 Figure 4-203 [1] C. Blank Exposure 1. Removing the Blanking Exposure Unit 1) Set the machine to the maximum ratio (141%) as follows: • Turn on the power, and select a default ratio of 141%. • Press the Cop[...]
-
Pagina 121
CHAPTER 4 IMA GE FORMA TION SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 4-27 Figure 4-204 Figure 4-205 Figure 4-206 [3] [4] [5] Lamp PCBs 7) Open the machine’s top unit farther, and hold it in place using the handle of a screwdriver (about 30 mm in diameter). 8) Remove the four scre[...]
-
Pagina 122
[...]
-
Pagina 123
COPYRIGHT © 1999 CANON INC. CANON PC800s/900 s R EV . 0 AU G. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) CHAPTER 5 PICK-UP/FEEDING SYSTEM This chapter explains the principles used from when copy paper is picked up to when a copy is delivered in view of the functions of electrical and mechanical units and in relation to their timing of operation. I[...]
-
Pagina 124
[...]
-
Pagina 125
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-1 Table 5-101 Notation PS3 PS4 PS5 Q751 Name Delivery sensor Vertical path roller paper sensor Single-feeder paper sensor Pre-registration roller paper sensor Remarks Single-feeder model only I. PICKUP/FEEDING SYS[...]
-
Pagina 126
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-2 Figure 5-101 (Multifeeder type) Figure 5-102 (Single-feeder type) Multifeeder pickup roller Cassette pickup roller Vertical path roller Q751 PS4 Static eliminator Photosensitive drum Holding plate Cassette Copy [...]
-
Pagina 127
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-3 B. Controlling the Pickup Roller 1. Outline The machine has three types of pickup rollers, i.e., cassette pickup roller, multifeeder pickup roller, and single-feeder pickup roller, and each of these rollers are [...]
-
Pagina 128
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-4 Figure 5-104 (Single-feeder type) M1 SL1 SL5 Cassette pickup solenoid drive signal (CPUSD*) Pickup clutch solenoid drive signal (PUSLD*) DC controller PCB Copy paper Pickup clutch Arm Cassette pickup rollers Spr[...]
-
Pagina 129
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-5 STBY INTR SCFW SCRV LSTR STBY Copy Start key ON 0.7sec (approx.) II I Cassette pickup solenoid (SL5) Vertical path roller paper sensor (PS4) Pickup clutch solenoid (SL1) Main motor (M1) I : Re-pickup operation i[...]
-
Pagina 130
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-6 Figure 5-106 M1 SL1 SL4 Cam gear Spring clutch Control ring Lifter Multifeeder pickup roller Paper guide plate Copy paper DC controller PCB Multifeeder pickup solenoid drive signal (MFSLD*) Pickup clutch solenoi[...]
-
Pagina 131
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-7 Figure 5-107 M1 DC controller PCB Pickup clutch Single-feeder paper sensor SL1 Single-feeder Pickup roller Copy paper Single-feeder paper detection signal (SFPD) PS5 5. Controlling the Single-feeder Pickup Rolle[...]
-
Pagina 132
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-8 Figure 5-108 SCRV Delivery sensor (PS3) Pre-registration roller paper sensor (Q751) Cassette pickup solenoid (SL5) Switching to 9-cpm copying speed Main motor (M1) SCFW SCRV SCFW SCFW SCRV I 19th copy SCRV I: A [...]
-
Pagina 133
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-9 Figure 5-109 M1 Claw SL2 DC controller PCB Registration clutch solenoid drive signal ( RGSLD* ) Pre-registration roller paper detection signal ( RPD ) Pre- registration roller paper sensor (Q751) Copy paper Pape[...]
-
Pagina 134
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-10 Figure 5-110 Figure 5-111 Copy Start key ON STBY INTR SCFW SCFW SCRV Forward Reverse LSTR STBY Main motor (M1) Delivery sensor (PS3) Scanner SCRV 0.7sec (approx.) 0.1sec (approx.) 0.3sec (approx.) II Pickup clu[...]
-
Pagina 135
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-11 STBY INTR SCFW SCFW SCRV Forward Reverse LSTR STBY Main motor (M1) Scanner Delivery sensor (PS3) SCRV 0.7sec (approx.) 0.1sec(approx.) 1sec Copy Start key ON I II 0.3sec (approx.) Multifeeder pickup solenoid (S[...]
-
Pagina 136
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-12 Figure 5-113 (Multifeeder type) Figure 5-114 (Single-feeder type) Multifeeder pickup roller Cassette pickup roller Vertical path roller Q751 PS4 Photosensitive drum Cassette Fixing assembly Delivery roller PS3 [...]
-
Pagina 137
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-13 1. Multifeeder Pickup Assembly (no paper, pickup delay jam) If copy paper does not reach the pre-registration roller paper sensor within a specific period of time in multifeeder mode, the condition will be iden[...]
-
Pagina 138
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-14 Figure 5-118 Copy Start key ON STBY INTR SCFW No paper Cassette pickup solenoid (SL5) Jam check Main motor (M1) Vertical path roller paper sensor (PS4) 1.2sec 1.2sec 1.5sec 1.2sec P indication Re-pickup Normal [...]
-
Pagina 139
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-15 Figure 5-119 4. Vertical Path Stationary Jam If copy paper fails to move past the vertical path roller paper sensor within a specific period of time because of faulty feeding, the machine will identify the cond[...]
-
Pagina 140
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-16 Figure 5-122 Figure 5-121 6. Registration Paper Stationary Jam If copy paper does not move past the pre-registration roller paper sensor within a specific period of time because of feeding faults, the machine w[...]
-
Pagina 141
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-17 Figure 5-123 8. Delivery Stationary Jam If copy paper does not move past the delivery sensor within a specific period of time because of feeding faults, the machine will identify the condition as a delivery sta[...]
-
Pagina 142
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-18 II. DISASSEMBLY/ASSEMBLY As needed, disassemble/assemble the machine with the following in mind: 1. ! Before starting the work, turn off the power switch and disconnect the power plug for safety. 2. Unless othe[...]
-
Pagina 143
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-19 Figure 5-201 Figure 5-202 [1] [2] [3] A. Pickup Assembly 1. Removing the Pickup Roller 1) Pull out the cassette. 2) Remove the front lower cover. (See Chapter 7.I I I.A.2.“Removing the Front Lower Cover.”) [...]
-
Pagina 144
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-20 Figure 5-203 Figure 5-204 [4] [5] [6] [7] [9] [8] 5) While pulling the guide plate [4] of the cassette pickup solenoid in the direction of the arrow, turn the gear [5] slightly in the direction of the arrow to [...]
-
Pagina 145
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-21 Figure 5-205 Figure 5-206 He x wrench [10] Pickup roller shaft [11] Pickup gear unit 7) Using a hex wrench or the like, push the hook [10] of the pickup roller through the hole to remove the pickup roller [11].[...]
-
Pagina 146
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-22 Figure 5-207 Figure 5-208 [1] [2] [3] 2. Removing the Pickup Clutch 2.1 Removing the Pickup Clutch (single- feeder type) 1) Remove the front lower cover. (See Chapter 7.I I I.A.2.“Removing the Front Lower Cov[...]
-
Pagina 147
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-23 Figure 5-209 Figure 5-210 Figure 5-211 [5] [6] [5] [4] [8] [7] [6] [9] [10] [11] 5) Remove the screw [4] and the two claws [5], and detach the gear unit [6]. 6) Free the claw [7] of the gear unit [6], and detac[...]
-
Pagina 148
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-24 Figure 5-212 Figure 5-213 [1] [2] [3] 2.2 Removing the Pickup Clutch (multifeeder type) 1) Remove the front lower cover. (See Chapter 7.I I I.A.2.“Removing the Front Lower Cover.”) 2) Remove the registratio[...]
-
Pagina 149
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-25 Figure 5-214 Figure 5-215 [4] [4] [5] [6] [7] 5) While freeing the two claws [4], remove the pickup clutch unit [5]. 6 ) Remove the E-ring [6], and detach the pickup clutch [7].[...]
-
Pagina 150
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-26 Figure 5-216 Figure 5-217 [1] [2] [3] 3. Removing the Vertical Path Roller 1) Remove the front lower cover. (See Chapter 7.I I I.A.2.“Removing the Front Lower Cover.”) 2) Open the machine’s top unit farth[...]
-
Pagina 151
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-27 Figure 5-218 [4] [5] 4) While lifting the sensor lever [4], remove the vertical path roller [5].[...]
-
Pagina 152
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-28 Figure 5-219 Figure 5-220 [1] [2] [1] Pickup gear unit B. Multifeeder Assembly 1. Removing the Multifeeder Unit 1) Open the right door. 2) Remove the two screws [1], and detach the multifeeder unit [2]. Caution[...]
-
Pagina 153
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-29 Figure 5-221 Figure 5-222 Figure 5-223 [2] [1] [1] [3] [4] [6] [5] 2. Removing the Multifeeder Pickup Roller 1) Remove the multifeeder unit. (See 1. “Removing the Multifeeder Unit.”) 2) Free the claw [1], a[...]
-
Pagina 154
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-30 Figure 5-224 Figure 5-225 [1] [2] [3] [4] [5] [5] 3. Removing the Separation Pad 1) Remove the multifeeder pickup roller to- gether with its shaft. (See 2. “Removing the Multifeeder Pickup Roller.”) 2) Remo[...]
-
Pagina 155
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-31 Figure 5-226 [1] [2] [1] C. Single-feeder Assembly 1. Removing the Single-feeder Unit 1) Open the right door. 2) Remove the two screws [1], and remove the single-feeder unit [2]. Figure 5-227 Figure 5-228 2. Re[...]
-
Pagina 156
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-32 Figure 5-229 [3] [5] [6] 4) Free the claw [5] of the paper guide plate [3], and remove the single-feeder pickup roller [6].[...]
-
Pagina 157
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-33 Figure 5-230 Figure 5-231 [2] [1] [3] [3] [3] [3] [3] [3] [4] [4] [4] [4] [5] [5] [5] D. Feeding Assembly 1. Detaching the Feed Belt 1) Open the machine’s top unit. 2) Push down the stopper [1], and remove th[...]
-
Pagina 158
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-34 Figure 5-233 [3] [2] [2] Figure 5-232 [1] [1] E. Registration Roller Assembly 1. Removing the Registration Roller Unit 1) Open the machine’s top unit. 2) Remove the spring [1] (front, rear). 3) Remove the two[...]
-
Pagina 159
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-35 Figure 5-234 Figure 5-235 [1] [2] [3] [4] 2. Removing the Registration Roller Clutch 1) Remove the registration roller unit. (See 1. “Removing the Registration Roller Unit.”) 2) Remove the bushing [1] and t[...]
-
Pagina 160
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-36 Figure 5-237 Figure 5-238 [1] [3] [3] [2] [4] [5] [6] F. Delivery Assembly 1. Removing the Delivery Roller 1) Remove the fixing lower roller. (See Chapter 6.I I.A.3.“Removing the Fix- ing Lower Roller.”) 2)[...]
-
Pagina 161
CHAPTER 5 PICK-UP/FEEDING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 5-37 Figure 5-239 Figure 5-240 4) Remove the two bushings [7]. 5) While shifting the delivery lower guide [8] toward the rear, detach the delivery roller [9]. [7] [8] [9][...]
-
Pagina 162
[...]
-
Pagina 163
COPYRIGHT © 1999 CANON INC. CANON PC800s/900 s R EV . 0 AU G. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) CHAPTER 6 FIXING SYSTEM This chapter explains the principles used to fuse toner images to transfer medium in view of the functions of electrical and mechanical units and in relation to their timing of operation. It also shows how these units ma[...]
-
Pagina 164
[...]
-
Pagina 165
CHAPTER 6 FIXING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 6-1 Table 6-101 Item Fixing method Fixing drive Fixing heater Fixing temperature detection Cleaner Protective functions Error code Description SURF Main Motor (M1) Flat heater Thermistor (TH1) Cleaning roller The following a[...]
-
Pagina 166
CHAPTER 6 FIXING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 6-2 Figure 6-101 Figure 6-102 Cleaning roller Fixing lower roller Fixing thermistor (TH1) Thermal fuse 2 (FU2) Fixing film Fixing heater (H1) M1 Fixing thermistor signal (TH1) DC controller PCB Composite power supply PCB M[...]
-
Pagina 167
CHAPTER 6 FIXING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 6-3 B. Controlling the Fixing Temperature 1. Outline The fixing lower roller of the fixing assembly is driven by the main motor (M1). When the fixing lower roller rotates, the film of the fixing upper unit starts to rotate i[...]
-
Pagina 168
CHAPTER 6 FIXING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 6-4 2. Controlling the Temperature of the Fixing Heater The temperature of the fixing heater is switched according to the following two parameters: • Temperature of the fixing heater when the Copy Start key is pressed. ?[...]
-
Pagina 169
CHAPTER 6 FIXING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 6-5 Heater temperature when the Copy Start key is pressed Less than 100°C 100°C or more and less than 120°C 120°C or more Number of copies 1 2 ~ 9 10 ~ 29 30 ~ 39 40 ~ 49 50 ~ 59 60 ~ 1 ~ 9 10 ~ 19 20 ~ 29 30 ~ 39 40 ~ 1[...]
-
Pagina 170
CHAPTER 6 FIXING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 6-6 Figure 6-106 Figure 6-105 4. Correcting the Variation in the Resistance of the Fixing Heater The characteristics of the flat heater used as the fixing heater vary from heater to heater because the production method. A [...]
-
Pagina 171
CHAPTER 6 FIXING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 6-7 Figure 6-107 5. Controlling the Power Supplied to the Fixing Heater between Sheets When the copying speed is controlled to 6 cpm to prevent overheating of the copyboard, the temperature of the fixing lower roller tends t[...]
-
Pagina 172
CHAPTER 6 FIXING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 6-8 6. Protective Functions The machine is equipped with the following protective functions to prevent malfunction of the fixing heater. a. Thermistor (TH1) The microprocessor on the DC controller PCB monitors the voltage [...]
-
Pagina 173
CHAPTER 6 FIXING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 6-9 b. Thermal Fuse (FU2) If the temperature around the thermal fuse exceeds 228°C and remains so for a specific period of time, the thermal fuse will blow to cut the power to the fixing heater.[...]
-
Pagina 174
CHAPTER 6 FIXING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 6-10 II. DISASSEMBLY/ASSEMBLY As needed, disassemble/assemble the machine with the following in mind: 1. ! Before starting the work, turn off the power switch and disconnect the power plug for safety. 2. Unless otherwise i[...]
-
Pagina 175
CHAPTER 6 FIXING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 6-11 Figure 6-201 Figure 6-202 [5] [4] [3] [1] [2] [2] [3] [1] [1] Fixing heater [2] Fixing film [3] Inlet guide [4] Fixing lower roller [5] Cleaning roller A. Fixing Assembly 1. Construction Caution: 1. The fixing film is m[...]
-
Pagina 176
CHAPTER 6 FIXING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 6-12 Figure 6-203 Figure 6-204 [5] [4] [8] [6] [7] 3) Remove the screw [4], and disconnect the connector [5]. 4) Remove the two screws [6], and discon- nect the connector [7]; then, detach the fixing assembly [8] by turnin[...]
-
Pagina 177
CHAPTER 6 FIXING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 6-13 Figure 6-205 Figure 6-206 [1] [2] [2] [3] [5] [4] 3. Removing the Fixing Lower Roller 1) Remove the fixing assembly. (See 2. “Removing the Fixing Assem- bly.”) 2) Remove the two screws [1], and free the two hooks [2[...]
-
Pagina 178
CHAPTER 6 FIXING SYSTEM COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 6-14 4. Removing the Cleaning Roller 1) Remove the fixing lower roller. (See 3. “Removing the Fixing Lower Roller.”) 2) Remove the cleaning roller [1] together with the bushing. Figure 6-208 [1] Figure 6-207 [6] 4 ) Re[...]
-
Pagina 179
COPYRIGHT © 1999 CANON INC. CANON PC800s/900 s R EV . 0 AU G. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) CHAPTER 7 EXTERNALS/AUXILIARY MECHANISMS This chapter shows the machine's external parts, and explains the principles used for the machine's various control mechanisms in view of the functions of electrical and mechanical units and in[...]
-
Pagina 180
[...]
-
Pagina 181
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 7-1 Figure 7-101 Heat e xhausting fan FM1 I. FANS The machine is equipped with two fans serving to discharge ozone or cool its inside. The heat exhaust fan is driven directly by the main motor (M1; through[...]
-
Pagina 182
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 7-2 Figure 7-102 I: If 6-cpm copying speed control is executed starting with the first copy, the fan will rotate. STBY INTR SCFW Forward SCFW SCRV Reverse LSTR STBY Main motor (M1) Scanner cooling fan (F[...]
-
Pagina 183
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 7-3 Figure 7-201 Power plug DS1 Composite power supply circuit Noise filter circuit Door switch Relay RL601 FU102 Trans- former T600 Auxiliary power supply circuit +5V Micro- processor (Q900) Main transfor[...]
-
Pagina 184
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 7-4 B. Power Supply Circuit The machine’s power supply consists of a composite power supply circuit in which a DC power supply, scanning lamp power supply, and high-voltage power supply are integrated [...]
-
Pagina 185
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 7-5 Figure 7-202 Door switch DS1 Auxiliary power supply Relay RL601 FU102 +5V Microprocessor (Q900) C123 Power switch SW309 Control panel DC controller PCB Power supply Main transfor- mer T101 DC power sup[...]
-
Pagina 186
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 7-6 C. Detecting an Error on the Composite Power Supply PCB The machine’s composite power supply PCB is equipped with a self diagnostic function to check each power output and the communication with th[...]
-
Pagina 187
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 7-7 III. DISASSEMBLY/ASSEMBLY As needed, disassemble/assemble the machine with the following in mind: 1. ! Before starting the work, turn off the power switch and disconnect the power plug for safety. 2. U[...]
-
Pagina 188
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 7-8 Figure 7-301 (Copyboard type) [2] [1] [3] [6] [4] [5] [7] [1] Copyboard cover [2] Top cover [3] Control panel [4] Front lower cover [5] Cassette [6] Front upper cover [7] Left cover A. External Cover[...]
-
Pagina 189
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 7-9 Figure 7-303 Figure 7-302 (ADF type) [1] ADF [2] Top cover [3] Control panel [4] Front lower cover [5] Cassette [6] Front upper cover [7] Left cover [2] [1] [3] [6] [4] [5] [7] [1] [3] [2] [1] Rear cov[...]
-
Pagina 190
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 7-10 Figure 7-304 Figure 7-305 [1] [1] [2] [3] [3] [4] 1. Removing the Top Cover 1) Remove the copyboard cover or the ADF. 2) Open the machine’s top unit. 3) Remove the two screws [1], and detach the f[...]
-
Pagina 191
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 7-11 Figure 7-306 Figure 7-307 [5] [6] [7] [8] [9] 5) Remove the screw [5], and free the four claws [6]; then, detach the rear cover [7]. 6 ) Remove the screw [8], and detach the copyboard cover foot retai[...]
-
Pagina 192
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 7-12 Figure 7-308 [10] [11] [10] 7) Free the two claw [10]; then lift the top cover [11] to detach.[...]
-
Pagina 193
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 7-13 Figure 7-309 [1] [2] [1] [3] [3] [4] Figure 7-310 2. Removing the Front Lower Cover 1) Open the right door. 2) Remove the two screws [1], and detach the multifeeder unit [2] (or the single- feeder uni[...]
-
Pagina 194
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 7-14 Figure 7-312 Figure 7-313 [6] [6] [7] Pickup gear unit Figure 7-311 [5] 5 ) Remove the two screws [5] from the screw plate found at the bottom of the ma- chine. 6) While freeing the five claws [6], [...]
-
Pagina 195
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 7-15 Figure 7-314 Figure 7-315 [1] [1] [2] [4] Lighter Darker Auto Exposure Manual Exposure Photo Timer Sa ver Mov e to the right [5] [6] [3] [7] B. Control Panel 1. Removing the Control Panel 1) Open the [...]
-
Pagina 196
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 7-16 Figure 7-316 Figure 7-317 [1] [2] [2] [3] Grounding plate Cop yboard glass C. Copyboard Glass 1. Removing the Copyboard Glass 1) Remove the top cover. (See A.1. “Remov- ing the Top Cover.”) 2) C[...]
-
Pagina 197
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 7-17 Figure 7-318 Figure 7-319 [1] [2] [3] D. Main Motor/Main Drive Assembly 1. Removing the Main Motor Unit 1) Remove the drum cartridge. 2 ) Remove the composite power supply PCB. (See E.2. “Removing t[...]
-
Pagina 198
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 7-18 Figure 7-321 [5] [5] [6] [4] Figure 7-320 5) Detach the fan belt [4]. 6) Remove the four screws [5], and detach the main motor unit [6]. Caution: When installing the main motor unit, be sure to atta[...]
-
Pagina 199
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 7-19 Figure 7-322 Figure 7-323 [1] [2] [3] 2. Removing the Main Drive Assem- bly 1) Remove the drum cartridge. 2 ) Remove the composite power supply PCB. (See E.2. “Removing the Composite Power Supply PC[...]
-
Pagina 200
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 7-20 Figure 7-324 Figure 7-325 [4] [5] [5] [6] 5) Detach the fan belt [4]. 6) Remove the five screws [5], and detach the main drive assembly [6]. Caution: When installing the main drive assem- bly, be su[...]
-
Pagina 201
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 7-21 Figure 7-326 Figure 7-327 [1] [1] [2] [3] [4] [4] [4] [5] E. Electrical System 1. Removing the DC Controller PCB 1) Open the machine’s top unit. 2 ) Remove the screw [1], and detach the front upper [...]
-
Pagina 202
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 7-22 Figure 7-328 Figure 7-329 [1] [2] [3] [3] [3] [4] 2. Removing the Composite Power Supply PCB 1) Remove the copyboard cover or the ADF. 2) Remove the left cover and the rear cover. 3) Remove the scre[...]
-
Pagina 203
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 7-23 5) Remove the seven screws [5], and free the five claws [6]; then, detach the composite power supply PCB [7]. Figure 7-330 [5] [5] [5] [6] [7][...]
-
Pagina 204
CHAPTER 7 EXTERNALS/A UXILIAR Y MECHANISMS COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 7-24 3. Points to Note When Handling the Composite Power Supply PCB 1) Some capacitors on the composite power supply hold charges when the machine’s power supply is off. Take extra care never to short [...]
-
Pagina 205
COPYRIGHT © 1999 CANON INC. CANON PC800s/900 s R EV . 0 AU G. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) CHAPTER 8 ADF I. ADF .............................................. 8-1 A. Outline ................................... 8-1 B Basic Construction ................ 8-2 C . Basic Operations ................... 8-4 D . Detecting an Original ........[...]
-
Pagina 206
[...]
-
Pagina 207
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-1 I. ADF A. Outline The ADF picks up the originals stacked on the original tray starting with the topmost original, moves them through the copyboard, and delivers them. See Figure 8-101 for an outline of the feeding route. Figure 8-[...]
-
Pagina 208
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 8-2 B Basic Construction 1. Outline of the Electric Circuitry The ADF’s major electrical mechanisms are controlled by the CPU on the ADF controller PCB. The CPU on the ADF controller PCB reads the signals from the sensors and the cop[...]
-
Pagina 209
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-3 2. Inputs to and Outputs from the ADF Controller PCB a. Inputs to and Outputs from the ADF Controller PCB (1/1) Figure 8-103 ADF switch Registration paper sensor Original placement sensor Delivery sensor PI1 J105 J6-1 -2 ADF contr[...]
-
Pagina 210
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 8-4 C. Basic Operations 1. Outline The ADF uses two motors for picking up and delivering originals. The pickup motor (M2) is used to pick up originals, and the belt motor (M1) is used to move, stop, and deliver originals. Further, the [...]
-
Pagina 211
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-5 2. One-Sided Original Mode The ADF picks up originals stacked on the original tray starting with the topmost original; after it picks up an original, it places it on the copyboard glass for copying, moves it away from the copyboar[...]
-
Pagina 212
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 8-6 D. Detecting an Original 1. Outline The ADF’s original detection mechanism has the following two functions: 1. Detecting the Presence/Absence of an Original Checks whether there is an original on the original tray. 2. Identifying[...]
-
Pagina 213
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-7 2. Identifying the Length of the Original The registration paper sensor (PI2) is used to identify the length of the original, if any. The ADF controller computes the length of the original based on the time it takes for the origin[...]
-
Pagina 214
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 8-8 E. Pickup Operation 1. Operation When an original is placed on the original tray and the Copy Start key is pressed, the following sequence of operations takes place: 1 Preparing for PickUp Operation When an original is placed on th[...]
-
Pagina 215
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-9 3 Arching The first original is butted against the registration roller so that it arches. Figure 8-110 4 Feeding Operation 1 The feeding belt is moved so that the leading edge of the first original comes into contact with the deli[...]
-
Pagina 216
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 8-10 5 Feeding 2 The feeding belt is moved counterclockwise so that the first original is stopped at a specific location on the copyboard glass. Figure 8-113 6 Moving the Scanner and Picking Up the Second Original The scanner starts to[...]
-
Pagina 217
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-11 2. Sequence of Pickup Operations (A4/LTR, 2 originals) Figure 8-115 3. Sequence of Operations (LGL, 2 originals) Figure 8-116 Original set Copy Start key ON Preparing for pickup Pickig up Pickup motor (M2) Belt motor (M1) Origina[...]
-
Pagina 218
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 8-12 F. Delivery 1. Operations The ADF operates as follows to deliver originals from the copyboard glass: 1 Delivery Feeding The feeding belt is moved to feed and deliver the first original on the copyboard glass. At the same time, the[...]
-
Pagina 219
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-13 2. Sequence of Operations (A4/LTR, 2 originals) Figure 8-119 3. Sequence of Operations (LGL, 2 originals) Figure 8-120 Original set Copy Start key ON Pickup motor (M2) Belt motor (M1) Original detection sensor (PI3) Registration [...]
-
Pagina 220
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 8-14 G. Controlling the Pickup Motor 1. Outline Figure 8-121 is a diagram of the control circuit for the pickup motor (M2). The pickup motor is a DC motor. The CPU (Q1) on the ADF controller PCB sends the motor drive signals PM0 and PM[...]
-
Pagina 221
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-15 H. Controlling the Belt Motor 1. Outline Figure 8-122 is a diagram showing the control circuit for the belt motor (M2). The belt motor is a 4-phase control stepping motor. The CPU (Q1) on the ADF controller PCB sends control puls[...]
-
Pagina 222
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 8-16 I. Detecting Original Jams The ADF is equipped with three jam sensors (PI1 through PI3) as indicated in Figure 8-123 to monitor the movement of originals. The movement of originals are checked at such times as programmed in the CP[...]
-
Pagina 223
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-17 J. Power Supply 1. Outline Figure 8-124 shows the routes of power supply. The ADF is supplied by the copier with 5 V and 24 V. The 24V supply is cut off when the ADF is opened, i.e., when the ADF switch (MS1) turns off. The 5V su[...]
-
Pagina 224
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800S/900S REV .0 A UG. 1999 PRINTED IN JA P AN (IMPRIME AU JAPON) 8-18 II. DISASSEMBLY/ASSEMBLY As needed, disassemble/assemble the machine with the following in mind: 1. ! Before starting the work, turn off the power switch and disconnect the power plug for safety. 2. Unless otherwise instructed, [...]
-
Pagina 225
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-19 A. Removing the ADF 1) Open the machine’s top unit. 2) Free the two claws [1], and slide the left cover [2] to detach. 3) Remove the screw [3], and free the four claws [4]; then, the detach the rear cover [5]. 4) Close the mach[...]
-
Pagina 226
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 8-20 Figure 8-204 Figure 8-205 [11] [11] 6) Disconnect the two connectors [8], and remove the screw [9]; then, remove the cable bush [10]. 7) Remove the two lockpin [11], and remove the ADF from the copier. [8] [10] [9] [8][...]
-
Pagina 227
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-21 B. External Covers Remove the covers as follows when cleaning, checking, or repairing the inside of the machine: 1) Remove the ADF from the copier. (See “A. Removing the ADF.”) 2) Remove the feeding roller [1] from the bushin[...]
-
Pagina 228
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 8-22 3) Remove the six screws [3], and separate the lower cover [4] from the upper cover [5]. 4) Disconnect the connector [6], and remove the lower cover [4]. Figure 8-208 Figure 8-209 [3] [4] [5] [3] [3] [4] [6][...]
-
Pagina 229
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-23 C. Drive System 1. Drive Unit 1) Remove the lower cover. (See “B. External Covers.”) 2) Remove the screw [1] and the bushing [2]; then, remove the pickup roller cover [3]. 3) Remove the E-ring [4], and remove the bearing [5].[...]
-
Pagina 230
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 8-24 4) Remove the timing belt [6], and remove the feeding belt roller [7] by shifting it in the direction of the arrow. 5) Remove the five screws [9], and remove the right hinge unit [8]. 6) Remove the stop ring [10] (resin) and the b[...]
-
Pagina 231
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-25 7) Disconnect the two connectors [12], and remove the five screws [13]; then, remove the drive unit [14]. Figure 8-215 [12] [13] [14] [13][...]
-
Pagina 232
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 8-26 D. Feeding System 1. Pickup Roller 1) Remove the drive unit [1]. (See “C.1. Drive Unit.”) 2) Remove the E-ring [2], and remove the shaft [3]; then, detach the pickup roller 1 [4]. 3) Remove the stop ring [5]. Figure 8-216 Figu[...]
-
Pagina 233
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-27 4) Remove the two straight pins [6], and re- move the pickup roller 2 [8] while moving the cover [7] in the direction of the arrow. Figure 8-219 [6] [6] [7] [8][...]
-
Pagina 234
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 8-28 2. Registration Roller 1) Remove the lower cover. (See “B. External Covers.”) 2) Remove the link arm [1] from the registra- tion roller shaft [2] by turning the link arm. 3) While pushing the bushing [3] in the di- rection of [...]
-
Pagina 235
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-29 3. Feeding Belt 1) Remove the lower cover. (See “B. External Covers.”) 2) Remove the two tension springs [1]. 3) Remove the E-ring [2], and remove the bearing [3]. 4) Remove the timing belt [4], and remove the feeding belt dr[...]
-
Pagina 236
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 8-30 5) Remove the two equalizer spring [6] and the two feeding belt rolls [7]. 6) Remove the two screws [9], and remove the delivery sensor unit [8]. 7 ) Remove the stop ring [10] (made of resin); then, remove the bushing [11]. Figure[...]
-
Pagina 237
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-31 8) Remove the screw [12], and remove the grounding wire [13]; then, remove the de- livery roller unit [14] by moving it in the direction of the arrow. 9) Remove the screw [15], and remove the static eliminating brush [16]. 10 ) R[...]
-
Pagina 238
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 8-32 11) Pull out the actuator [21] in the direction of the arrow; then, remove the feeding belt link roller [22], and remove the feeding belt [23]. Figure 8-231 [21] [22] [23][...]
-
Pagina 239
CHAPTER 8 ADF COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 8-33 E. Electrical System 1. ADF Controller PCB 1) Remove the lower cover. (See “B. External Covers.”) 2) Disconnect the five connectors [1], and remove the two screws [2]; then, remove the ADF controller PCB [3]. 2 . Original Pla[...]
-
Pagina 240
[...]
-
Pagina 241
COPYRIGHT © 1999 CANON INC. CANON PC800s/900 s R EV . 0 AU G. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) CHAPTER 9 INSTALLATION I. SELECTING A SITE .................... 9-1 II. UNP A CKING AND INST ALLA TION ............................ 9-2 A. Unpacking and Installation .... 9-2 B. Placing Cop y P aper ............... 9-9 III. MO VING THE MA CHINE[...]
-
Pagina 242
[...]
-
Pagina 243
CHAPTER 9 INST ALLA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 9-1 I. SELECTING A SITE Keep the following in mind when selecting a site for installation; if possible, visit the user’s before delivery of the machine: • The site offers a power outlet whose rating is as specified (±1[...]
-
Pagina 244
CHAPTER 9 INST ALLA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 9-2 II . UNPACKING AND INSTALLATION When a piece of metal is brought in from a cold to warm place, droplets of water tend to form on its surface. This phenomenon is known as “condensation” and, in copiers, can cause blan[...]
-
Pagina 245
CHAPTER 9 INST ALLA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 9-3 Work Checks and remarks Step Remove the shipping attachment [2] (black screw) from the right side of the machine. 4 Shipping attachment [2] You will be storing the shipping attachment [2] inside the machine in step 9. T[...]
-
Pagina 246
CHAPTER 9 INST ALLA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 9-4 Work Checks and remarks Step Open the copyboard cover, and remove the protective sheet. (Copyboard type only) Caution: If the protective sheet is not fond on the ma- chine, go to the next step. 6 Protective sheet Open th[...]
-
Pagina 247
CHAPTER 9 INST ALLA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 9-5 Work Checks and remarks Step Pick the fixing member from the bottom of the top unit, and detach it. 8 Store the shipping attachments [1] and [2] re- moved in steps 3 and 4 in the machine’s bot- tom unit. 9 [1] [2] Hol[...]
-
Pagina 248
CHAPTER 9 INST ALLA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 9-6 Work Checks and remarks Step Place the cartridge on a level place, and pull off the open seal. Holding the tab, pull it straight out in the di- rection of the arrow. Caution: The seal can tear in the middle. Do no pull i[...]
-
Pagina 249
CHAPTER 9 INST ALLA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 9-7 Work Checks and remarks Step While bending the ADF auxiliary tray in the direction of arrows in the figure, insert it into the holes on the edge of the original tray. 16 Holes ADF auxiliary tray Slide in and out the aux[...]
-
Pagina 250
CHAPTER 9 INST ALLA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 9-8 Work Checks and remarks Step Attach the copy tray. 20 Check to make sure that the three grooves in the copy tray are all in place. Place copy paper inside the cassette. (For how, see B. “Placing Copy Paper.”) 21 All [...]
-
Pagina 251
CHAPTER 9 INST ALLA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 9-9 Work Checks and remarks Step B. Placing Copy Paper 1. Universal Cassette Take out the cassette from the machine, and remove the protective members and the label. Remove the rear guide plate as shown, and mount it back t[...]
-
Pagina 252
CHAPTER 9 INST ALLA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 9-10 Work Checks and remarks Step Place copy paper in the cassette, and set the cassette into the machine. 4 All text on the label attached to the cassette is English. If you need to replace it with a non- English label, sel[...]
-
Pagina 253
CHAPTER 9 INST ALLA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 9-11 Work Checks and remarks Step 2. 250-Sheet/500-Sheet Cassette Take out the cassette from the machine, and remove the protective member. 1 Slide the rear end paper guide plate as shown to match the size of the paper to b[...]
-
Pagina 254
CHAPTER 9 INST ALLA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 9-12 III. MOVING THE MACHINE If you need to move the machine by truck or any other means of transportation after installa- tion, be sure to perform the following: Work Checks and remarks Step Turn on the power, and press the[...]
-
Pagina 255
CHAPTER 9 INST ALLA TION COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 9-13 Work Checks and remarks Step Fit the shipping attachments [1] and [2] de- tached in step 5 back to the machine. 8 Shipping attachment [1] Shipping attachment [2] Tape the machine's top unit in place to prevent it [...]
-
Pagina 256
[...]
-
Pagina 257
COPYRIGHT © 1999 CANON INC. CANON PC800s/900 s R EV . 0 AU G. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) CHAPTER 10 MAINTENANCE AND SERVICING I. PERIODICALL Y REPLA CED P ARTS ....................................... 10-1 II. DURABLES AND CONSUMABLES ...................... 10-1 III. SCHEDULED SER VICING ....... 10-1 IV . ST ORING AND HANDLING THE C[...]
-
Pagina 258
CHAPTER 10 MAINTENANCE AND SER VICING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 10-1 I. PERIODICALLY REPLACED PARTS The machine does not have parts which must be replaced on a periodical basis. II . DURABLES AND CONSUMABLES The machine does not have items designated as durables or consumab[...]
-
Pagina 259
CHAPTER 10 MAINTENANCE AND SER VICING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 10-2 IV . STORING AND HANDLING THE CARTRIDGE The cartridge is subject to the effects of the environment whether its packing seal is intact or removed or whether it is inside the machine or otherwise, changing ov[...]
-
Pagina 260
CHAPTER 10 MAINTENANCE AND SER VICING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 10-3 B. Storing and Handling the Cartridge with the Packaging Seal Removed The photosensitive medium is an organic photoconducting (OPC) material, which would dete- riorate if subjected to storing light. The ca[...]
-
Pagina 261
CHAPTER 10 MAINTENANCE AND SER VICING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 10-4 2. Handling the Cartridge a. Before setting the cartridge in the machine or if copies have white spots as when it starts to run out of toner, hold the cartridge level and shake it about 90° several times a[...]
-
Pagina 262
CHAPTER 10 MAINTENANCE AND SER VICING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 10-5 c. Do not touch the surface of the photosensitive drum as by opening the shutter for the photosen- sitive drum cover found at the bottom of the cartridge. (If you have soiled the surface of the photosensit[...]
-
Pagina 263
[...]
-
Pagina 264
COPYRIGHT © 1999 CANON INC. CANON PC800s/900 s R EV . 0 AU G. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) CHAPTER 11 TROUBLESHOOTING I. MAINTENANCE AND INSPECTION ............................ 11-3 A. Image Adjustment Basic Procedure ........................... 11-3 B. P oints to Note for Ser vicing ............................ 11-4 II. ST AND ARDS [...]
-
Pagina 265
[...]
-
Pagina 266
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-1 Guide to the Troubleshooting Procedure This chapter provides troubleshooting instructions in the form of tables prepared based on generally found flow charts. Study the following for an idea of how to use them: AC p[...]
-
Pagina 267
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-2 • Often, you will find the following instructions when checking the voltage using a meter: “mea- sure the voltage between J109-1 (+) and -2 (-) on the DC controller PCB.” The symbol “+” indicates the termin[...]
-
Pagina 268
11-3 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) I. MAINTENANCE AND INSPECTION A. Image Adjustment Basic Procedure Making Pre-Checks Adjusting the Optimum Density Clean the par ts. Is the cop y density correction s witch (SW101) set to the middle inde x? (Note 1) Set it at the middle. Select[...]
-
Pagina 269
11-4 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) B. Points to Note for Servicing Copyboard cover Item Tools/solvent Work/remarks Copyboard glass Scanning lamp Reflecting plate No. 1 through No. 6 mirror Alcohol Alcohol Lint-free paper Blower brush Cleaning. Cleaning. Dry wiping. If dirt cann[...]
-
Pagina 270
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-5 I I . STANDARDS AND ADJUSTMENTS A. Mechanical 1. Copier a. Leading Edge Non-Image Width Make adjustments so that the leading edge non-image width is 2.0 ±1.5 mm when the Test Sheet is copied in Direct. Caution: If [...]
-
Pagina 271
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-6 b. Image Leading Edge Margin (registration activation timing) Make adjustments so that the leading edge margin is 2.5 ±1.5 mm when the Test Sheet is copied. Caution: Be sure to check that the leading edge non-image [...]
-
Pagina 272
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-7 c . Adjusting the Mirror Position (optical length between No. 1 mirror and No. 2 mirror) If you have replaced the scanner drive cable, you must adjust the mirror position, by changing the position of the cable retai[...]
-
Pagina 273
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-8 4) Turn the cable drive pulley [3] so that the three shafts [2] of the mirror positioning tool for the front and the rear may be arranged as shown. Figure 11-207 (rear) Figure 11-208 (front) [3] [2] [2] [2] [2][...]
-
Pagina 274
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-9 5) While keeping the condition of 4), tighten the positioning screw at the rear and the front of the No. 1 mirror mount [1]. Figure 11-209 (rear) Figure 11-210 (front) [1] [1][...]
-
Pagina 275
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-10 d. Checking the Force of the Cassette Spring If the force of the spring used to hold up the holding plate of the cassette is not correct, pickup faults or the like can occur. If a fault is suspected, check the force[...]
-
Pagina 276
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-11 e-1. Routing the Scanner Drive Cable Figure 11-212 Wind 1.5 times. (black cable) Wind 7.5 times. (silver- colored cable)[...]
-
Pagina 277
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-12 e-2. Routing the Scanner Drive Cable 1. Before Starting the Work Prepare the following: • Mirror positioning tool (FY9-3009) • Cable clip (FY9-3017) • Adhesive tape 1) Set the mirror positioning tool as shown.[...]
-
Pagina 278
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-13 5) If the machine is equipped with an ADF, free the hook [2], and disconnect the two relay connec- tors [3] from the left upper stay [4]. Figure 11-215 6) Remove the three screws [5], and detach the left upper stay[...]
-
Pagina 279
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-14 7) Remove the four screws [7], and detach the lens cover [8]. Figure 11-217 [7] [7] [8][...]
-
Pagina 280
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-15 2. Routing the Reversing Cable 1) Wind the reversing cables (silver-colored) [2] on the cable drive pulley [1] 7.5 times with the longer of the two on top; then, secure it in position with a cable clip [3]. Figure [...]
-
Pagina 281
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-16 2) Put the cable drive pulley [1] into the shaft [4], and secure it in position with an E-ring [5]. When putting the cable drive pulley into the shaft, be sure that the hook is at the front. Figure 11-220 3) Hook th[...]
-
Pagina 282
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-17 4) Lead the shorter end [6] under the No. 1 mirror mount [8] and the No. 2/3 mirror mount [9]; then, hook it on the left rear pulley [10] and the pulley [11] of the No. 2/3 mirror mount. Figure 11-222 5) After fitt[...]
-
Pagina 283
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-18 6) Lead the longer end [14] along the cable drive pulley, and hook it on the pulley [15] on the right front side. Figure 11-224 7) Lead the longer end [14] under the No. 1 mirror mount [8] and the No. 2/3 mirror mou[...]
-
Pagina 284
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-19 8) Hook the longer cable [14] on the cable hook [18]; then, secure its end to the left side with adhesive tape [19]. Be sure that the secured end of the cable is found where the hole in the left side plate and the [...]
-
Pagina 285
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-20 3. Routing the Forwarding Cable 1) Fit the longer end forwarding cable (black) [2] on the top hook of the cable drive pulley [1], and wind it 1.5 times. Then, secure the shorter end [3] as shown with adhesive tape [[...]
-
Pagina 286
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-21 3) Lead the longer end [5] under the No. 1 mirror mount [7]; then, hook it on the pulley [8] of the No. 2/3 mirror mount, and lead it between the No. 1 mirror mount [7] and the scanning lamp [9]. Figure 11-229 4) H[...]
-
Pagina 287
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-22 5) Free the shorter end [3], and hook it on the pulley [11] on the right rear side. Figure 11-231 6) Lead the shorter end [3] under the No. 1 mirror mount [7], and hook it on the pulley [12] of the No. 2/3 mirror mo[...]
-
Pagina 288
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-23 7) Hook the end of the shorter end [3] on the hole [13] on the right side. Figure 11-233 8) Free the shorter end [3] and the longer end [5] (reversing cable), and connect both with a spring [14]; then, fit the stop[...]
-
Pagina 289
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-24 9) Detach the pulley clip [16] from the cable drive pulley [1]. Figure 11-235 [1] [16][...]
-
Pagina 290
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-25 4. Positioning the No. 1 Mirror Mount 1) Fix the rear and the front of the No. 1 mirror mount [1] temporarily to the metal fixing [2] of the forwarding cable. Figure 11-236 (rear) Figure 11-237 (front) [1] [2] [1] [...]
-
Pagina 291
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-26 2) Turn the cable drive pulley [4] so that the three shafts [3] of the mirror positioning tool for rear and front is as shown. Figure 11-238 (rear) Figure 11-239 (front) [4] [3] [3] [3] [3][...]
-
Pagina 292
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-27 3) While keeping the condition of step 2), tighten the positioning screw on the rear and front of the No. 1 mirror mount [1]. Figure 11-240 (rear) Figure 11-241 (front) [1] [1][...]
-
Pagina 293
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-28 f . Point to Note When Mounting the Scanning Lamp When mounting the scanning lamp, be sure that its logo mark (manufacturer’s name) is toward the front. Further, be sure that the protrusion near its middle is as s[...]
-
Pagina 294
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-29 g. Points to Note When Mounting the Fuse When mounting the thermal fuse of the No. 1 mirror mount, be sure that the fuse is oriented as shown. Make sure that the fuse is in contact with the reflecting plate. Figure[...]
-
Pagina 295
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-30 B. ADF 1. Adjusting the Original Stop Position Adjust the original stop position in the following order: 1. Correcting original skew 2. Adjusting the rear/front original stop position 3. Adjusting the original leadi[...]
-
Pagina 296
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-31 3) Press the Copy Start key to make a copy. 4) Check to make sure that the difference between L1 and L2 on the copy is 1.8 mm (standard) or less. Figure 11-246 5) If the difference is not as specified, turn the adj[...]
-
Pagina 297
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-32 3. Adjusting the Rear/Front Original Stop Position You must first correct original skew before adjusting the rear/front original stop position. 1) Obtain a sheet of A4 or LTR white copy paper, and draw two lines as [...]
-
Pagina 298
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-33 3) Turn on the machine, and place the test sheet prepared in step 1) on the original tray. Figure 11-250 4) Press the Copy Start key to make a copy. 5) Check to make sure that the distance L3 on the copy image indi[...]
-
Pagina 299
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-34 6) If the distance is not as specified, loosen the pinion gear positioning screw under the original tray, and adjust the position of the pinion gear. Figure 11-252 Relationship between Pinion Gear Position and L3 Ta[...]
-
Pagina 300
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-35 4. Adjusting the Original Leading Edge Stop Position You must first correct original skew and adjust the rear/front original stop position before adjusting the original leading edge stop position. 1) Obtain a sheet[...]
-
Pagina 301
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-36 3) Turn on the machine, and place the test sheet prepared in step 1) on the original tray. Figure 11-255 4) Press the Copy Start key to make a copy. 5) Check to make sure that the distance L4 on the copy image indic[...]
-
Pagina 302
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-37 6) If the distance is not as specified, shift bit 1 of the DIP switch (SW1) on the ADF controller PCB to ON, and place an A4 or LTR white copy paper on the original tray. Figure 11-257 7) Press the push switch (PSW[...]
-
Pagina 303
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-38 8) Use the rotary switch (SW2) on the ADF controller PCB to adjust the original leading edge stop position. Moving the rotary switch by a single notch changes the original stop position by about 0.3 mm. Press the pu[...]
-
Pagina 304
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-39 Example: If L4 is 13 mm, You must shift the original stop position toward the leading edge by 3 mm. 1) Place a sheet of A4 or LTR white copy paper on the original tray. 2) Shift bit 1 of the DIP switch (SW1) on the[...]
-
Pagina 305
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-40 4) Press the push switch (PSW) on the ADF controller PCB. • The copy paper on the copyboard will be discharged, and the optimum value will be stored. Figure 11-262 0 F E D C B A 9 8 7 6 5 4 3 2 1 ON 12 PSW[...]
-
Pagina 306
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-41 C. Electrical 1. After Replacing the Major Parts *1: If you have replaced the composite power supply PCB, check copy images using the Test Sheet; if (and only if) an image fault is found, adjust the intensity of th[...]
-
Pagina 307
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-42 2. Adjusting the Intensity of the Scanning Lamp Adjust the intensity of the scanning lamp if you have replaced any of the following: • DC controller PCB • Composite power supply PCB (See p.11-41.) • Scanning l[...]
-
Pagina 308
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-43 3. AE Adjustment Perform this adjustment if you have replaced any of the following: • DC controller PCB • Composite power supply PCB (See p.11-41.) • AE sensor PCB • Scanning lamp Making Adjustments Before [...]
-
Pagina 309
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-44 4) Turn VR103 on the DC controller PCB fully clockwise. Figure 11-266 5) Place a newspaper on the copyboard, and close the copyboard cover. 6) Turn VR102 so that the display indicates ‘A3’ to ‘Ad’. Figure 11[...]
-
Pagina 310
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-45 9) Repeat steps 5) through 8) so that the values of both VR102 and VR103 are target values. Caution: If you cannot set VR102 and VR103 to the target values at the same time, turn VR103 fully counterclockwise, and g[...]
-
Pagina 311
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-46 4. Adjusting the Reproduction Ratio (fine adjustment) Adjust the reproduction ratio if you have replaced the following: • DC controller PCB Making Adjustments Before Starting the Work • Meter 1) Before replacing[...]
-
Pagina 312
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-47 5. Checking the Photointerrupters 1) Set the meter range to 12 VDC. 2) Connect the - probe to GND (CPGND1) on the DC controller PCB. Figure 11-271 3) Make checks as instructed. Reference: The photointerrupers other[...]
-
Pagina 313
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-48 III. TROUBLESHOOTING IMAGE FAULTS A. Making Initial Checks 1. Site Environment Check the site against the following considerations: a. The voltage of the power source is as rated. b. The site must not be subject to [...]
-
Pagina 314
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-49 8. Consumable a. Cartridge When the cartridge starts to run out of toner, copies will start to have white lines or spots as shown. Figure 11-301 Try the following as necessary: 1) Take out the cartridge from the ma[...]
-
Pagina 315
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-50 9. Others When a machine is brought in from a cold place (e.g., warehouse) to a warm place, condensa- tion can occur inside it, leading to various problems; e.g., a. Condensation on the scanner (glass, lens, mirror,[...]
-
Pagina 316
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-51[...]
-
Pagina 317
11-6 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-52 NOTE: The samples are created intentionally. The NA-3 Test Sheet was copied in the direct mode in A3 and printed with a reduction of about 19%; actual images may be somewhat different.[...]
-
Pagina 318
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-53 C. Troubleshooting Image Faults 1 The copy is too light. (halftone area only) 2 The copy is too light. (including solid area) 3 The copy is too light. (enter image, appreciably) YES/NO YES NO NO YES YES NO YES NO C[...]
-
Pagina 319
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-54 4 The copy has uneven density. (darker at front) 5 The copy has uneven density. (lighter at front) YES/NO YES YES NO Cause Scanner Cartridge, Scanning lamp Transfer charging roller Step 1 2 Checks Clean the scanning[...]
-
Pagina 320
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-55 10 The copy has white spots. (vertical) 11 The copy has white lines. (vertical) YES/NO YES YES YES YES NO Cause Fixing assembly Cartridge Static elimi- nator Transfer charging roller Cartridge Step 1 2 3 4 Checks T[...]
-
Pagina 321
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-56 13 The back of the copy is soiled. YES/NO NO YES YES NO Cause --------------- Transfer guide assem- bly Feeding assembly Pickup guide assembly, Delivery roller Step 1 2 3 Checks Turn off the power while copy paper i[...]
-
Pagina 322
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-57 14 The copy has a fixing fault. YES/NO NO YES NO YES Cause Copy paper Fixing film Fixing heater DC control- ler PCB, Composite power supply PCB Step 1 2 3 Checks Is the copy paper of a recommended type? Is the prob[...]
-
Pagina 323
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-58 19 The copy has horizontal fogging. YES/NO YES YES NO YES NO Cause Scanning lamp Cartridge, High-voltage transformer assembly Scanning system Feeding system Step 1 2 3 Checks Does the scanning lamp flicker? Replace [...]
-
Pagina 324
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-59 20 The copy has poor sharpness. (out-of-focus) YES/NO YES YES NO NO YES NO Cause --------------- Original Lens Mirror position Scanner Cartridge Step 1 2 3 4 5 Checks Is the image also too light? Is the original of[...]
-
Pagina 325
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-60 22 The copy is solid black. YES/NO NO YES Cause --------------- Step 1 Checks Does the scanning lamp remain on during copying? Action See “The scanning lamp fails to turn on.” Is the cartridge set correctly?[...]
-
Pagina 326
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-61 IV. TROUBLESHOOTING MALFUNCTIONS A. Troubleshooting Malfunctions 1E 0 YES/NO YES NO Cause ---------------- Step 1 Checks 1) Turn off the power, and short JP101 and JP102 on the DC controller PCB with a screwdriver.[...]
-
Pagina 327
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-62 CHAPTER 11 TROUBLESHOO TING 11-62 2 E000 YES/NO NO NO YES YES NO Cause Thermistor (TH1) Heater, Fuse (FU2) Thermistor (TH1) Composite power supply PCB DC control- ler PCB Step 1 2 3 4 Checks Are the connection of J102 on the DC controller PCB [...]
-
Pagina 328
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-63 4 E002, E003 YES/NO NO NO YES YES NO Cause Thermistor (TH1) Heater, Fuse (FU2) Thermistor (TH1) Composite power supply PCB DC control- ler PCB Step 1 2 3 4 Checks Is the connection of J102 on the DC controller PCB [...]
-
Pagina 329
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-64 CHAPTER 11 TROUBLESHOO TING 11-64 6 E064 YES/NO YES NO YES YES YES YES NO Cause Wiring High-voltage contact Transfer charging roller Primary charging roller High-voltage cable Composite power supply PCB DC control- ler PCB Step 1 2 3 4 5 6 Che[...]
-
Pagina 330
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-65 8 E210 YES/NO NO NO YES Cause ---------------- Lens home position sensor (PS2) DC control- ler PCB Step 1 2 Checks Does the lens move when the power is turned on? Is the lens home position sensor (PS2) normal? (For[...]
-
Pagina 331
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-66 CHAPTER 11 TROUBLESHOO TING 11-66 12 E400 YES/NO YES NO YES NO Cause ---------------- 5V power supply ADF con- troller PCB Step 1 2 3 Checks Turn off and then on the power. Is the probrem corrected? Set the matter to the 20VDC range, and conne[...]
-
Pagina 332
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-67 14 AC power fails to turn on. YES/NO NO YES NO NO YES YES NO NO NO NO NO YES NO Cause Power plug ---------------- Machine top unit Power supply Fuse (FU501) Fuse (FU102) Door switch (DS1) Noise filter PCB Harness C[...]
-
Pagina 333
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-68 CHAPTER 11 TROUBLESHOO TING 11-68 15 DC power fails to turn on. YES/NO NO YES YES NO Cause AC power supply Wiring, DC load Fuse Composite power supply PCB Step 1 2 3 Checks Is AC power present between J201-1 and -2 on the composite power suppl[...]
-
Pagina 334
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-69 16 Pickup fails. (cassette) YES/NO NO NO NO NO NO YES Cause Main motor (M1) Cassette Paper in cassette Pickup clutch solenoid (SL1), Cassette pickup solenoid (SL5) Cassette spring DC control- ler PCB Step 1 2 3 4 5[...]
-
Pagina 335
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-70 CHAPTER 11 TROUBLESHOO TING 11-70 17 Pickup fails. (multifeeder) YES/NO NO NO NO NO YES Cause Wrong operation Main motor (M1) Paper place- ment Multifeeder pickup solenoid (SL4), Pickup clutch solenoid (SL1) DC control- ler PCB Step 1 2 3 4 Ch[...]
-
Pagina 336
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-71 19 The scanner fails to move forward. YES/NO NO NO NO NO YES NO Cause Cable Scanner path Composite power supply PCB Pre-registra- tion roller paper sensor (Q751) Scanner/lens drive motor (M2) DC controller PCB Step[...]
-
Pagina 337
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-72 CHAPTER 11 TROUBLESHOO TING 11-72 21 The blanking lamp fails to turn on. YES/NO NO YES Cause Side blank- ing PCB DC control- ler PCB Step 1 Checks Remove J106 from the DC control PCB, and set the meter range to 1 k Ω ; then, connect the mete[...]
-
Pagina 338
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-73 23 The lens fails to turn on. YES/NO NO NO NO YES NO Cause Lens sole- noid (SL3) Lens cable, Pulley, Rail DC power supply Scanner/lens drive motor (M2) DC control PCB Step 1 2 3 4 Checks Does the lens solenoid (SL3[...]
-
Pagina 339
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-74 CHAPTER 11 TROUBLESHOO TING 11-74 25 The "Add Paper" message fails to turn off. YES/NO NO NO NO NO YES NO Cause Cassette Lens cable, Pulley, Rail DC power supply Vertical path roller paper sensor (PS4) Control panel PCB DC control- l[...]
-
Pagina 340
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-75 V. TROUBLESHOOTING FEEDING PROBLEMS A. Copy Paper Jam Inside the machine, jams tend occur in the following blocks: [1] Pickup block [2] Separation/feeding block [3] Fixing/delivery block The troubleshooting procedu[...]
-
Pagina 341
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-76 1 Pickup Assembly YES/NO NO NO YES YES NO NO NO YES Cause ---------------- Cassette Copy paper Copy paper DC control- ler PCB, Pickup clutch Registration roller drive assembly Vertical path roller paper sensor (PS4)[...]
-
Pagina 342
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-77 2 Separation/Feeding Assembly YES/NO YES YES YES NO YES NO YES NO Cause Copy paper Feeding assembly Feed belt, Roller Static elimi- nator Pre-registra- tion roller paper sensor (Q751) Registration roller Registrati[...]
-
Pagina 343
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-78 B. Faulty Feeding 1 Double-Feeding YES/NO NO NO YES NO YES Cause Cassette Copy paper Claw (cas- sette) Step 1 2 3 4 Checks Is the copy paper placed under the claw properly? Push down the copy paper inside the casset[...]
-
Pagina 344
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-79 VI . ARRANGEMENT AND FUNCTIONS OF ELECTRICAL PARTS A. Sensors and Solenoids Figure 11-601 PS SL Description Scanner home position detection Lens home position detection Delivery assembly paper detection Vertical pa[...]
-
Pagina 345
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-80 B. Switches Figure 11-602 Description Door switch Power switch Density correction switch Symbol Name Switch Switch Notation DS1 SW309 SW101 Remarks DS1 SW309 SW101[...]
-
Pagina 346
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-81 C. Lamp, Heater, Motor, Etc. Figure 11-603 Description Scanning lamp Fixing heater Main motor Scanner/lens drive motor Scanner cooling fan Fixing heater temperature detection Scanner temperature detection Lamp over[...]
-
Pagina 347
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-82 D. PCBs Figure 11-604 [2] [1] [3] [4] [5] [6] [7] [8] [9] Description Removes noise from the power supply. Controls sequence of operations. Supplies DC power, generates high voltage, and controls the scanning lamp. [...]
-
Pagina 348
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-83 E. ADF Description Delivery paper detection Registration roller paper detection Original placement detection ADF open/close switch Belt motor Pickup motor Controls sequence of operations Symbol [1] Name Photointerr[...]
-
Pagina 349
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-84 F. Variable Resistors (VR) and Check Pins by PCB Of the variable resistors (VR) and check pins, those needed in the field are discussed herein. Those not found in the discussions are for the factory only, requiring [...]
-
Pagina 350
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-85 3. ADF Controller PCB Figure 11-608 1 10 TP1 1 9 J5 1 8 4 J2 1 J1 CB1 21 J6 7 1 J3 FACE PSW SW1 SW2 12 ON Soldered side[...]
-
Pagina 351
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-86 VII. SELF DIAGNOSIS The microprocessor on the machine’s DC controller PCB is equipped with a self diagnostic mechanism that checks the condition of the machine (particularly, sensors) and indicates an error code i[...]
-
Pagina 352
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) 11-87 Code Cause Description • The main motor (M1) is fault. • The DC controller PCB is faulty. • The composite power supply PCB is faulty. • The DC controller PCB is faulty. • The scanner home position sensor [...]
-
Pagina 353
CHAPTER 11 TROUBLESHOO TING COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) 11-88 Caution: 1. If the self-diagnosis has turned on, turn off the power switch to reset the machine. In the case of ‘E000’, ‘E001’, ‘E002’, or ‘E003’, however, the machine must be reset as follows: this [...]
-
Pagina 354
COPYRIGHT © 1999 CANON INC. CANON PC800s/900 s R EV . 0 AU G. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) APPENDIX A. GENERAL TIMING CHAR T ........ A-1 B. SIGNALS AND ABBREVIA TIONS ....................... A-3 C . GENERAL CIRCUIT DIA GRAM ................................... A-5 D . DC CONTROLLER CIRCUIT DIA GRAM ...................................[...]
-
Pagina 355
[...]
-
Pagina 356
A-1 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) Power switch ON Copy Start key ON Sequence STBY INTR AER SCFW SCRV LSTR STBY 1 2 3 4 5 6 7 8 9 10 11 12 13 14 18 19 20 15 16 17 Main motor (M1) Lens solenoid (SL3) Scanner / lens drive motor (M2) Scanner home position sensor (PS1) Lens home p[...]
-
Pagina 357
A-2 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU JAPON) Power switch ON Sequence 1 2 3 4 5 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 Pickup motor (M2) Belt motor (M1) Original detection sensor (PI3) Registration paper sensor (PI2) Delivery sensor (PI1) Main motor (M1) Scanner home position[...]
-
Pagina 358
A-3 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) B. SIGNALS AND ABBREVIATIONS 1. Signals ACBIAS AC BIAS OSCILLATION signal [AE] AE SENSOR OUTPUT signal AEREF AE SENSOR REFERENCE signal BIAS_PWM DC BIAS CONTROL signal BIAS_S DC BIAS MONITOR signal CLK32K TRANSFORMER CONTROL signal CPUSD CASS[...]
-
Pagina 359
A-4 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU JAPON)[...]
-
Pagina 360
A-5 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 123456789 1 0 1 1 J109 +24VU +24VU GND +5V +24VU +24VU 1 2 3 4 5 6 123456 J51 1 J52 2 21 J53 2 1 1 2 SL SL3 SL1 SL SL2 J54 SL 1 2 2 1 1 3 2 321 J55 SL4 SL 2 31 J56 PS2 J57 PS5 2 3 1 3 J113 1 2 DIG2 GND 3 J132 1 24 5 +5V +24VU GND SL5 SL 1 2 J[...]
-
Pagina 361
A-6 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU JAPON) 2. ADF 4321 3 42 1 34 2 34 2 1 1 2 4 15 GND BL L +5V BR +24V GND D OR GN J24 J202 T o composite power supply T o DC controller 4 3 2 1 J114 6 87 5 J23 Y BL V ACK REQ GND GND L L BL 5 4 TxD GY 6 3 GND L BL 7 2 RxD W 8 1 GND L BL 8 7 6 5 1234 7 [...]
-
Pagina 362
A-7 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) 100 99 98 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 81 80 79 78 77 76 PA7 PA6 PA5 PA4 PA3 PA2 PA1 PA0 Vss P84 P83 P82 P81 P80 AVss P77 P76 P75 P74 P73 P72 P71 P70 Vref AVcc P47 P30 P31 P32 P33 P34 P35 P36 P37 Vcc P10 P11 P12 P13 P14 P15[...]
-
Pagina 363
A-8 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU JAPON) DC Controller Circuit DIagram (2/8) Q165 SC_I_SEL3 +5V R277 SC_I_SEL1 R117 Q112 SC_I_SEL2 SC_INB* SC_INB SC_INA* SC_INA R267 Q155 R115 OUTA* 1 TdA 2 REFA 3 GA 4 INA* 5 INA 6 VSA 7 OUTA 8 RSA 9 RSB 10 OUTB* 11 VSB 12 TdB 13 REFB 14 GB 15 INB* 1[...]
-
Pagina 364
A-9 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) DC Controller Circuit Diagram (3/8) R119 R118 VR102 2 3 1 +5V C184 Q106 +24VR - + 2 3 1 8 4 R266 AEREF R265 R264 R263 VR103 2 3 1 +5V C186 C185 C111 C155 Q106 +24VR - + 6 AE 5 7 8 4 R206 R120 AE_DATA R121 ZD101 21[...]
-
Pagina 365
A-10 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU JAPON) DC Controller Circuit Diagram (4/8) D106 CDP 5 12 D108 DPD 3 12 D109 SFPD 7 12 D218 SERVICE 2 12 D113 HEAT1 3 12 D102 HEAT0 2 8 7 7 KR7 8 KEY<7..0> 12 D114 [CPM1] DIG1 D114 10CPM 12/13CPM KR6 12 D115 [CPM0] DIG0 KR6 12 D103 [SIZE0] DIG3[...]
-
Pagina 366
A-11 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) DC Controller Circuit Diagram (5/8) 1 2 R145 + Q131 3 2 1 R158 R149 R140 R139 E0_DT R148 Q107 +5V - + 2 3 12 15 34 VSS IN A IN B VDD OUT X 8 4 R275 ZER_CRS_EDGE +5V R279 R293 VR105 2 BL_VR 3 1 +5V R278 R294 VR104 2 RGAD_VR 3 1 +5V R382 VR107[...]
-
Pagina 367
A-12 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU JAPON) DC Controller Circuit Diagram (6/8) LNSLD Q145 3 2 1 LNSLD* D211 21 D125 21 D126 21 D127 21 D124 21 +24VU R165 PUSLD Q144 3 2 1 PUSLD* R162 RGSLD Q143 3 2 1 RGSLD* R161 MFSLD Q142 3 2 1 MFSLD* R166 FM1D Q200 FM1D* R352 CPUSD Q201 CPUSD* R353 [...]
-
Pagina 368
A-13 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) DC Controller Circuit Diagram (7/8) D184 D185 POWER_OFF* HEAT_ERR* COMP_CLR R189 R188 Q146 3 2 1 Q147 3 2 1 +5V R186 R187 +5V R196 +5V + 12 C142 R193 R192 R190 +5V Q107 +5V – + 6 5 7 8 4 R191 R212 R214 D128 21 D133 21 RLOFF* HEAT_TRG C143 [...]
-
Pagina 369
A-14 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU JAPON) DC Controller Circuit Diagram (8/8) R385 R200 +5V +5V J101 1 R363 +5V +24VU +5V R365 J101 3 SCHP J102 1 TH1 J102 2 DIG1 J102 3 HEAT0 J102 4 DIG1 J102 5 HEAT1 DIG3 DPD J102 6 J105 3 J105 4 J105 5 J105 6 J114 1 J114 2 J105 1 J105 2 J101 2 R388 [...]
-
Pagina 370
A-15 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) E. ADF CONTROLLER CIRCUIT DIAGRAM ADF Controller Circuit Diagram (1/3) XT AL 1 64 RES* 63 P66/IRQ2* 62 P65/IRQ1* 61 P64/IRQ0* 60 P63/FTI 59 P62/FT OB 58 P61/FT OA 57 P60/FTCI 56 P37/D7 55 P36/D6 54 P35/D5 53 P34/D4 52 P33/D3 51 P32/D2 50 P31[...]
-
Pagina 371
A-16 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU JAPON) ADF Controller Circuit Diagram (2/3) 2 TdA GND 4 INA 6 OUT A 8 VSA 7 5 INA* 3 V refA 1 OUT A* Q4 C1 1 +5V R10 Q8 +5V R16 LED J7 2 1 J7 6 J3 OUT2 5 OUT A* 2 IN2 IN1 1 OUT1 3 OUT A 7 J3 4 GND 6 7 +24V NC VCC Q5 DM1 TP1 7 DM0 6 TP1 C12 R1 1 +5V [...]
-
Pagina 372
A-17 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) ADF Controller Circuit Diagram (3/3) Q10 TXD 1 J5 R43 R28 DIGIT0 R27 R26 R25 +5V DIGIT1 DIGIT2 DIGIT3 1 2 4 8 SW2 5 2 J5 3 J5 R24 +5V R23 +5V TP1 9 PDP1 C18 R22 TP1 C17 PDP2 R42 8 R21 5 4 +5V 6 J5 J5 J5 +5V R20 C16 PDP3 R41 R19 8 7 +5V 9 J5 [...]
-
Pagina 373
A-18 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU JAPON)[...]
-
Pagina 374
A-19 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) F. COMPOSITE POWER SUPPLY CIRCUIT DIAGRAM Composite Power Supply Circuit Diagram [A502] (1/8) AC_INPUT D603 R606 D606 C613 Q608 R602 C609 Q616 Q617 Q621 C604 Q605 VIN_1SR139 C818 C603 R601 R600 Q615 R616 R801 R609 C620 R613 R610 R612 R611 R6[...]
-
Pagina 375
A-20 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU JAPON) Composite Power Supply Circuit Diagram [A503] (2/8) AC_N_AF AC_H_AF AC_HA R116 TH101 TH102 FB104 FU102 Q105 AC_LA <A502> <A509> <A509> <A502> MPWM MPWM_INV <A508> <A504> Q113 C588 D542 D543 R644 R108 D121 D[...]
-
Pagina 376
A-21 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) Composite Power Supply Circuit Diagram [A504] (3/8) MPWM_INV <A508> R136 R155 C122 D107 R138 Q109 D105 FB102 FB103 T105 R128 C153 R167 R131 +24VR C125 R130 R145 +5V +5V + + + L101 +5V R169 R148 R156 D119 +24VR 4 8 4 1 3 2 C143 C145 C14[...]
-
Pagina 377
A-22 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU JAPON) Composite Power Supply Circuit Diagram [A505] (4/8) 3 4 4 1 1 2 2 5 3 10 9 C512 R514 R212 P AC_OUT JP140 PDC_PWM <A508> Q201 R211 C202 C204 D202 R209 R206 C206 <A508> <A503> <A503> PDC_S R205 R203 C201 R202 T101 MV_H M[...]
-
Pagina 378
A-23 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) Composite Power Supply Circuit Diagram [A506] (5/8) JP201 R210 <A503> <A503> C218 C215 <A508> <A508> <A508> ACBIAS BIAS_S BIAS_PWM R243 R207 C219 D215 C208 D214 R237 R239 R208 +5V Q206 R238 C221 T201 D207 D206 D[...]
-
Pagina 379
A-24 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU JAPON) Composite Power Supply Circuit Diagram [A507] (6/8) JP301 C346 C345 +5V R351 R356 Q321 D325 C344 C343 C321 C380 C382 C381 C379 C322 C342 <A508> T_REV_R T_FW_S HV_LIMIT <A508> <A508> <A508> T_FW_DR V T_FEEDBACK T_FW_ON [...]
-
Pagina 380
A-25 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) Composite Power Supply Circuit Diagram [A508] (7/8) <A504> <A507> <A506> <A505> <A504> <A503> <A504> <A507> <A507> <A507> +5V +5V +5V <A505> P AC_S HV_LIMIT Q901 RESET R802 VR[...]
-
Pagina 381
A-26 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU JAPON) Composite Power Supply Circuit Diagram [A509] (8/8) R028 R020 R021 R013 R012 R027 R006 R008 R018 D005 D006 C002 C004 +5V Q002 D002 Q003 R016 Q011 Q001 C005 <A508> LAMP_DETECT <A508> <A508> PWM_1KHz LAMP_ON D004 R011 R009 R06[...]
-
Pagina 382
A-27 COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) G. CONTROL PANEL CIRCUIT DIAGRAM J301 13 KR0 J301 14 KR1 J301 1 DIG0 J301 2 DIG1 J301 3 DIG2 J301 4 DIG3 J301 19 DIG4 J301 5 SEG0 SW304 SW308 PRESET COPY RATIO SW303 ZOOM CASSETTE/MULTI SW307 AE SW302 CLR SW306 COPY SW301 – SW305 + C303 R3[...]
-
Pagina 383
[...]
-
Pagina 384
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) A-29 APPENDIX H. AE SENSOR CIRCUIT DIAGRAM +24VR R603 R605 R601 C601 Q601 PD601 C603 R606 R602 J601-1 C602 +24VR + 2 3 1 8 4 J601-2 R604 Q601 +24VR + 6 5 7 8 4 J601-3 J601-4[...]
-
Pagina 385
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) A-30 APPENDIX I. SENSOR CIRCUIT DIAGRAM +5V J751-2 RPD J751-3 R751 GND J751-1 Q751[...]
-
Pagina 386
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) A-31 APPENDIX J. NOISE FILTER CIRCUIT DIAGRAM AC_H FU501 L501 J501-1 FG AC_N J501-2 JP502 JP501 C503 C502 C501 R501 C504[...]
-
Pagina 387
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) A-32 APPENDIX K. HIGH VOLTAGE CONTACT CIRCUIT DIAGRAM JP701 2 1 JP702 2 1 PR BP701 R704 JP703 2 1 JP704 2 1 SP BP702 JP705 2 1 JP706 2 1 DV BP703 R701 JP707 2 1 JP708 2 1 TR BP704 R702 JP709 2 1 JP710 2 1 [PR_IN] BP705 JP711 2 1 JP712 2 1 [GND_IN] B[...]
-
Pagina 388
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) A-33 APPENDIX L. BLANK EXPOSURE (front) CIRCUIT DIAGRAM LA601 J601 J601 2 1[...]
-
Pagina 389
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) A-34 APPENDIX M. BLANK EXPOSURE (rear) CIRCUIT DIAGRAM LA602 J602 J602 2 1[...]
-
Pagina 390
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU J APON) A-35 APPENDIX N. SPECIAL TOOLS You will need the following special tool(s) in addition to the standard tools set when servicing the machine. For checking the cas- sette spring pressure Range of measure- ments: 0 to 1,500g No CK-0054 Shape Tool Tool[...]
-
Pagina 391
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 AUG. 1999 PRINTED IN JAP AN (IMPRIME AU JAPON) A-36 APPENDIX O. SOLVENTS/OILS No. 1 2 3 4 Remarks • Do not bring near fire. • Procure locally. • Isopropyl alcohol may be substituted. • Do not bring near fire. • Procure locally. • CK-0451 (100cc) • CK-0551 (20g) Composition Hydrocar[...]
-
Pagina 392
COPYRIGHT © 1999 CANON INC. CANON PC800s/900s REV .0 A UG. 1999 PRINTED IN J AP AN (IMPRIME AU J APON) Prepared b y Office Imaging Pr oducts T echnical Support Division CANON INC. Printed in Japan REVISION 0 (A UG. 1999) (30359/10317) 5-1, Hakusan 7-chome, T oride-shi, Ibaraki 302-8501 Japan[...]
-
Pagina 393
0899AB2.135-1 PRINTED IN JAP AN (IMPRIME AU JAPON) This pubication is printed on 70% reprocessed paper.[...]