Casio DT-X11 Series manuale d’uso

PN410401-001 Fn BL ABC DEF GHI JKL MNO PQRS BS Alpha TUV WXYZ Handheld Terminal User’s Guide Series Be sure to read “Safety Precautions” inside this guide before trying to use your Handheld Terminal. After reading this guide, keep it in a safe place for future reference. E DT-X11_E_Hyo_1_4.p65 06.2.6, 4:31 PM 2[...]

• This Product includes BR YCEN Co., Ltd’ s BL-RAPPORE Stack and My W irefree Network Bluetooth User Interface Application, which use is gov erned by a license gr anted by BR YCEN Co., Ltd. • BLUETOO TH is a registered trademark owned by Bluetooth SIG, Inc. and licensed to CASIO COMPUTER CO., L TD. • Microsoft and W indows are either re gis[...]

E-1 Wa r ning Caution Danger Safety Precautions Congratulations upon your selection of this CASIO product. Be sure to read the following Safety Precautions before trying to use it for the f irst time. Markings and Symbols The following are the meanings of the markings and symbols used in these Safety Precautions. This symbol indicates information t[...]

E-2 Wa r ning Foreign Objects • Should any foreign matter get into the Handheld T erminal and its options, immediately turn off the po wer and contact your original vendor or an authorized CASIO service provider . Continued use creates the danger of f ire and electric shock. Dr opping and Damage • Should you drop the Handheld T erminal and its [...]

E-3 Caution Foreign Objects • Ta ke care to ensure that metals or combustible objects are not inserted into the openings of the Handheld T erminal and its options. Such the objects inside of the Handheld T erminal and its options create the danger of fire and electric shock. Location • Do not locate the Handheld T erminal and its options on a s[...]

E-4 Optional Lithium-ion Battery P ack Danger • Nev er allow the battery pack to become wet. W ater can create the danger of battery pack heat emission, explosion, and f ire. • Nev er use or leave the battery pack next to open flame, near a sto ve, or any other area exposed to high heat. Doing so creates the danger of battery pack heat emission[...]

E-5 Wa r ning • Nev er place the battery pack in a micro wav e oven or any other high-v oltage device. Doing so creates the dang er of battery pack heat emission, e xplosion, and f ire. • Should the battery pack emit a strange odor or heat, change color or shape, or exhibit an y other abnormal behavior , immediately stop using it. Continued use[...]

E-6 AC P ower Supply Wa r ning • Do not use the Handheld T erminal at a voltage other than the specified v oltage. Also, do not connect the Handheld T erminal to a multi-plug power strip. Doing so creates the danger of fire and electric shock. • Av oid conditions that can cause damage or breaks in the power cord. Do not place heavy objects on t[...]

E-7 AC Adaptor Caution • The housing of the A C adaptor can become warm during normal use. • Ta ke normal precautions against electric shock. • At least once a year , unplug the A C adaptor from the wall outlet and clean any dust that b uilds up between the prongs of the plug. Dust built up between the prongs can lead to the danger of f ire. [...]

E-8 Operating Precautions Y our Handheld T erminal and its options are precision digital instruments. Improper operation or rough handling can cause problems with data storage and other problems. Note and observe the follo wing precautions to ensure proper operation. • Do not continue operating the Handheld T erminal when battery power is lo w . [...]

E-9 Important • The contents of this guide are subject to change without notice. • Note that CASIO COMPUTER CO., L TD. shall not be held liable to you or any third parties for any losses or damages arising from the use of this guide. • This guide does not include any information about programming and do wnload procedures. See the applicable s[...]

E-10 GUIDELINES LAID DOWN BY FCC RULES FOR USE OF THIS UNIT IN THE U.S.A. (not applicable to other areas). NOTICE This equipment has been tested and found to comply with the limits for a Class B digital device, pur suant to Part 15 of the FCC Rules. These limits are designed to pro vide reasonable protection against harmful interference in a reside[...]

E-11 Product description / Intended use EU /EFT A member states intended f or use EU : Austria, Belgium, Denmark, Finland, France, Germany , Greece, Ireland, Italy , Luxembourg, The Netherlands, Portugal, Spain, Sweden, United Kingdom, Czech Republic, Hungary , Poland, Slov enia, Slov akia, Estonia, Latvia, Lithuania, Cyprus, Malta EFT A : Switzerl[...]

E-12 Safety Precautions ......................................................................................... E-1 Operating Precautions ................................................................................... E-8 Important ......................................................................................................... E-9 Be[...]

E-13 Using the Bridge Satellite Cradle (DT -160IOE) .......................................... E-37 General Guide ................................................................................................... E-37 Option ............................................................................................................... E-37 Connect[...]

E-14 Before Getting Started Be sure to perform the following ste ps before trying to use the Handheld T erminal for the first time. 1. When unpacking, make sure that everything is included. Open the box and make sure that all the items sho wn here are included. Handheld T erminal Stylus Wrist Strap PC Card Remover (2 pcs) User's Guide (this ma[...]

E-15 2 Load a battery pack ( HA-A20 BA T) or a large-capacity battery pack (DT -5025LB A T). Ta ke care that the battery pack is oriented correctly when you load it. 3 Replace the rechargeable battery pack co ver as sho wn in the diagram and then return the rechargeable battery pack co ver switches (two places) to the "LOCK" positions. Wh[...]

E-16 Handheld T erminal System Configuration Options DT -X11 Series DT -160IOE Bridge Satellite Cradle Required AC Adaptor (AD-S42120A) Fn BL ABC DEF GHI JKL MNO PQRS BS Alpha TUV WXYZ Cradle-type Battery Charger Required A C Adaptor (AD-S42120A) DT -891WH Required Screws Required Screws DT -169CHGE W all Mount Unit Laser Scanner models • DT -X11[...]

E-17 DT -5025LBA T (Large-capacity Battery Pack) Dual Battery Charger DT -5022CHG Battery Pack Required AC Adaptor (AD-S45150AE) HA-A20BA T * (Battery Pack) * DT -5023BA T batter y pack can also replace HA-A20BA T for DT -X11 series. DT-X11_E_P14_36.p65 06.2.6, 4:37 PM 17[...]

E-18 Cables RS-232C Cable (Dsub-9Pin, Female) RS-422 Cable USB Cable DT-887AXA DT-888RSC DT-380USB CF Card Extension Unit DT -894CFU Bundled Items Large Card Cov er 4 screws Communication Car d Co vers DT -892TCV DT -893L TCV DT-X11_E_P14_36.p65 06.2.6, 4:37 PM 18[...]

E-19 1 Indicator 1 2 Indicator 2 3 LCD Panel/T ouch Screen 4 Buzzer 5P o w er Ke y 6 Cursor Ke ys 7P rogrammable Key 8 Numeric Ke ys 9E x ecute Ke y 10 Function Ke ys Indicates the result of a barcode or other read operation. Red: Read error Green: Read successful This lamp indicates the charge status of the battery pack. Red: Charging Green: Charg[...]

E-20 11 IR Port 12 Power Contacts 13 CLR Key 14 Fn Key 15 PC Card Slot 16 USB Port 17 Headset Jack 18 Battery Pack Cov er Lock Switches 19 R T rigger Ke y 20 L T rigger Ke y 21 Wrist Strap Hole 22 C-MOS Imager (C-MOS Imager models only) Reader Port (Laser Scanner models only) 23 Reset Switch 24 CF Card Slot Unit Te r m inal 25 Battery Pack Cover Th[...]

E-21 Replacing the Battery Y our Handheld T erminal uses two types of battery: a battery pack and a memory backup battery . The battery pack is used to power normal operations and to stor e data, while the memory backup battery provides the po wer required to maintain memory contents when the battery pack power is unable to supply po wer for some r[...]

E-22 To replace the battery pack 1. Make sure that the Handheld T erminal is turned of f. If the power is on, press the po wer ke y to turn it off. 2. Turn o ver the Handheld T erminal. 3. Slide the two battery pack lock switches on both sides of the Handheld T erminal to the “FREE” position, and then remov e the battery pack cover . 4. Remove [...]

E-23 Loading the large-capacity battery pack into the Handheld T erminal After loading the large-capacity battery pack, you need to use the special lar ge-capacity battery pack cover in place of the standard battery co ver . Attachment and remov al of the large-capacity battery pack cov er are the same as those for the standard battery pack cov er [...]

E-24 Attaching the Wrist Strap Be sure to attach the wrist strap and use it to protect against dropping the Handheld Te rminal when carrying it around. To attach the wrist strap 1. Pass the thin cord of the wrist strap through the wrist strap hole on the back of the Handheld T erminal. 2. Pass the other end of the strap (the part where you insert y[...]

E-25 Configuring Handheld T erminal Settings Calibrating T ouch Screen Alignment Whenever you feel that touch screen response is poor or that the operations being ex ecuted do not match the location you are tapping on the touch screen, perform either of the follo wing operations to calibrate the alignment of the touch screen. • Press the “Fn”[...]

E-26 Adjusting Display Contrast Perform the follo wing steps to adjust display contrast to make display colors more vi vid and easier to see. • Press the “Fn” key and then press the “2” key or “3” key after confirming that “F” is displayed in the lower right corner of the screen. Pressing the “2” key adjusts for more contrast,[...]

E-27 Using the C-MOS Imager (C-MOS Imager models only) 1. T urn on the Handheld T erminal, position its C-MOS Imager reader port near the barcode or 2-dimensional code, and then press the T rigger Key (R or L). 2-dimensional code Green light Red light 2. The Handheld T erminal LED emits light and reads the code. Indicator 1 (read operation indicato[...]

E-28 About the Class 1 LED Label • This label identifies the Handheld T erminal as a Class 1 LED product under IEC60825-1+A2 : 2001. DT-X11_E_P14_36.p65 06.2.6, 4:38 PM 28[...]

E-29 Using the Laser Scanner (Laser Scanner models only) 1. After turning on the po wer, position the laser scanner close to a bar code and then press the trigger ke y . 2. The laser emits light and scans the bar code. If scanning is completed normally , Indicator 1 displays a green light and the b uzzer sounds. If the bar code was not scanned prop[...]

E-30 W arning Label • This label is a warning label f or Class 2 laser pr oducts that comply with IEC60825-1+A2:2001. • Although Class 2 laser light is only emitted momentarily , never look dir ectly into the beam light. • CAUTION Use of controls or adjustments or perf ormance of pr ocedures other than those specified her ein may result in ha[...]

E-31 P erf orming Comm unication IR Communication IR communication can be used to transfer data between two Handheld T erminals. When performing IR communication, orient the IR ports of both Handheld T erminals so they are pointing directly at each other . The ports can be in direct contact with each other , or they can be separated by up to 1 mete[...]

E-32 Bluetooth ® Communication Bluetooth ® protocol can also be used to transfer data between two Handheld T erminals. W ith Bluetooth ® the two Handheld T erminals should be located within about three meters (9 '10 1 ⁄ 8 " ) from each other , as long as there is nothing blocking the path between them. Important! Observe the f ollowi[...]

E-33 Resetting the Handheld T erminal Resetting the Handheld T erminal is the same as restarting a computer . Performing a reset causes all unsav ed inputs and edits to be lost, but data that is already stored in the memory as well as all settings should be unaffected. Use reset to restore normal operation whenev er the Handheld T erminal operates [...]

E-34 Performing a Full Reset (Initialization) Performing a full reset initializes memory . This means tha t all data stored in the memory (RAM) is deleted and all the settings are returned to their initial factory defaults. Perform a full reset whenever any one of the following conditions exists. • When you want to delete all memory contents and [...]

E-35 DT -X11 Specifications Model: DT -X11M30E, DT -X11M30U, DT -X11M30RC, DT -X11M10E, DT -X11M10RC CPU: Intel ® PXA255 Application Processor (400MHz max.) Memory: 64MB RAM; 128MB Flash R OM (FlashFX built in) OS: Microsoft ® W indows ® CE 5.0 operating system, English V ersion Display: 3.5-inch, 240 × 320-dot 2-W ay TFT color LCD C-MOS Imager[...]

E-36 Earphone J ack: ∅ 2.5mm ( 1 / 8 ") (3-pole) Supports headset. Po wer Requirements: Power Supply: HA-A20B A T Battery Pack DT -5025LBA T Large-capacity Battery Pack Memory Backup: Rechar gea ble Lithium Battery (Built-in) Power Consumption: 2.5A DC, 3.7/5V Battery Life: Battery Pack: DT -X11M30E/M30U/M10E Approximately 8 hours (HA-A20B A[...]

E-37 Bottom F ront Right Back To p 1 7 2 3 4 5 8 11 12 14 13 6 10 9 Using the Bridge Satellite Cradle (DT -160IOE) The optionally av ailable Bridge Satellite Cradle (DT -160IOE) makes it possible to transfer system data and file data between the Handheld T er minal and a computer ov er an RS-232C connection or USB connection. Y ou can also use the [...]

E-38 1 USB Port 2 RS-232C Port 3 RS-422C Port 4A C Adaptor Jack 5W all Mount Unit F astening Plate 6T erminal Detect Switch 7 IR Port 8P ow er Contacts 9P ow er Indicator Lamp 10 Communication Indicator Lamp 11 System Status Indicator Lamp 12 Po wer Switch 13 Desktop Unit 14 DIP Switches This port accepts connection of a USB cable for connection to[...]

E-39 POWER DA T A LINE Connecting the A C Adaptor and Connecting to Computer Use the A C adaptor av ailable as option for the Bridge Satellite Cradle to supply the po wer to it. Always make sure that the po wer is being supplied to the Bridge Satellite Cradle by the AC adaptor bef ore performing any type of data communication operation with the Han[...]

E-40 4. Turn on the po wer . This causes the Bridge Satellite Cradle po wer indicator lamp to light in red. 5. Making sure that their two IR ports come into contact with each other, place the Handheld T erminal onto the Bridge Satellite Cradle. This causes the Bridge Satellite Cradle po wer indicator lamp to light in green. • If the system is ope[...]

E-41 Configuring DIP Switch Settings Dismounting the bottom cover of the Bridge Satellite Cradle exposes the DIP switches. Y ou can change the ON/OFF settings of the DIP switches to set the configuration. Please, set after first switching OFF the po wer . 123 45678 Not used (Alwa ys off) Not used (Alwa ys off) Host Computer Interface Setting RS-232[...]

E-42 Using W all Mount Unit The follo wing procedure explains ho w to use the optional wall mount unit (DT - 891WH) to configure the Bridge Satellite Cradle for a wall-mounted configuration. 1. Remove the screws on the bottom of the Bridge Satellite Cradle, and remove the desktop unit. 2. Aff ix the wall mount unit to the bottom of the Bridge Satel[...]

E-43 5. Dri ve the other scr ew into the w all at the location where the lo wer hole is located. 6. Dri ve the upper scre w and lower scre w into the wall the rest of the way . To remove the Bridge Satellite Cradle fr om the wall 1. Loosen the upper scre w and lo wer screw . 2. Raise the Bridge Satellite Cradle and remo ve it from the scre ws. Impo[...]

E-44 Connecting Multiple Bridge Satellite Cradles (DT -160IOE) Use the modular cable f or the connections. Y ou can daisy chain multiple Bridge Satellite Cradles by connecting the C-OUT port of the first unit that is the near est to the host computer to the C-IN port of the next unit that is sitting to the first unit with DT -888RSC cable (RS-422 c[...]

E-45 Bridge Satellite Cradle (DT -160IOE) Specifications 1. IR Communication Interface: IR interface Protocol: IrD A V er . 1.1 Standard Synchronization: Asynchronous, frame synchronization Tr ansfer Rate: 9,600, 115,200, 4Mbps (4Mbps is possible during a USB connection with the host computer only .) 2. USB Protocol: USB V er1.1 Standard Tr ansfer [...]

E-46 Using the Cradle-type Battery Charger The optionally av ailable Cradle-type Battery Char ger (DT -169CHGE) lets you charge the Handheld T erminal’ s battery simply by placing the Handheld T erminal onto the charger . An optional wall mount unit lets you mount the Cradle-type Battery Char ger on a wall. General Guide Back To p F ront Right Bo[...]

E-47 1A C Adaptor Jack 2W all Mount Unit Fastening Plate 3T erminal Detect Switch 4 Power Contacts 5 Power Indicator Lamp 6 Power Switch 7 Desktop Unit Connect the AC adaptor here. The holes in this plate accept screws that secure the wall mount unit in place. This switch detects when the Handled T erminal is not seated correctly on the Cradle. Po [...]

E-48 Connecting the A C Adaptor for Cradle-type Battery Charger Use the special A C adaptor for the Cradle-type Battery Charger to connect to a w all outlet. 1. After making sure that the Cradle-type Battery Charger power switch is turned of f, plug the AC adaptor into the A C adaptor jack on the back of the charger . 2. Next, plug the A C adaptor [...]

E-49 Using W all Mount Unit To wall mount the Cradle-type Battery Char ger , use the same procedure as that described for the Bridge Satellite Cradle (DT -160IOE) on page 42. Cradle-type Battery Charger (DT -169CHGE) Specifications 1. Charging Charging System: Fixed-voltage (with current limiter) Charge T ime: Approximately 2.5 hours (standard batt[...]

E-50 Using the Dual Battery Charger The optionally av ailable Dual Battery Charger (DT -5022CHG) allows charging of tw o battery packs at the same time. General Guide Front Bac k To p 1 1 4 4 4 4 3 2 3 3 Bundled Items Connection Brack et 2 screws Option AC Adaptor AD-S45150AE DT-X11_E_P37_52.p65 06.2.6, 4:39 PM 50[...]

E-51 1 Charge Indicator Lamp 2A C Adaptor Jack 3 Dual Battery Charger Connection Port 4C onnection Bracket Attachment Holes This lamp indicates the charge status of the battery pack(s). Off: Not char ging Red: Charging Red Flashing: Battery pack problem Green: Charging complete Connect the A C adaptor here. Use this port to connect multiple Dual Ba[...]

E-52 Charging a Battery P ack 1. Plug the optional A C adaptor into the A C adaptor jack of the Dual Battery Charger . 2. Plug the other end of the A C adaptor into a wall outlet. 3. T aking care that the battery pack is oriented correctly , insert it into the Dual Battery Charger . This causes the Charge Indicator Lamp to light in red, indicating [...]

E-53 Connecting Multiple Dual Battery Chargers Y ou can connect up to three Dual Battery Chargers. Doing so makes it possible to supply power to all the Dual Battery Char ger s using the AC adaptor . 1. As sho wn in the illustrations below , remove the connector co vers of the Dual Battery Chargers you want to connect to each other . 2. Connect the[...]

E-54 Dual Battery Charger (DT -5022CHG) Specifications 1. Model: DT -5022CHG 2. Charging: Charging System: Fixed-voltage (with current limiter) Charge T ime: Approximately 2.5 hours for one battery pack Approximately 5.0 hours for one large-capacity battery pack Charging T wo Battery P acks Approximately 5.0 hours for tw o battery packs (HA-A20B A [...]

E-55 Using PC Car d (DT -X11M30E / M30U / M10E) Y our Handheld T erminal supports use of PC cards (PCMCIA card, compact flash card with a CF card adaptor). Use the following procedure to load and r emove PC cards. Affixing a PC Card Remo ver Once loaded, the PC card may be diff icult to remov e from the PC card slot. Aff ixing a PC card remover (a [...]

E-56 2. Remove the PC card slot cov er . 3. Slide a PC card with a remover tape af fix ed into the Handheld T erminal. Make sure that the top surface of the card is facing in the same direction as the Handheld T erminal display . Y ou will not be able to insert the card all the way into the slot if it is not oriented correctly . Be sure to fold the[...]

E-57 Using CF Card Extension Unit The CF Card Extension Unit (DT -894CFU) supports use of Compact flash (CF) T ype I cards and T ype II cards (3.3). Use the procedure below to load and remove CF cards. Important! • Installing some cards will make it impossible to close the card slot cov er . When that happens, you can either use the Lar ge Card C[...]

E-58 Loading a CF Car d 1. Wipe the surfaces of the card so it is free of an y dirt, dust, or oil. 2. Remov e the screws that secure CF Extension Unit in place, and then remov e the card slot cover . 3. Making sure that the top surface of the card is facing in the same direction as the Handheld T erminal display , slide the card into the slot. Y ou[...]

E-59 Using Rechar geable Battery P ac k Y our Handheld T erminal supports use of two battery pack types of dif ferent capacity . Y ou can select the one that best suits your needs in terms of operating time, the type of options you need to use, etc. When using the large-capacity battery pack, you need to use the special large-capacity battery pack [...]