CDA EVA90 manuale d’uso

Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www .cda.eu www .cda.eu ECA & EV A Extractors Installat i on, Use and Maintenance[...]

2 Important The CD A Group L td cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that CD A reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance or use in a commercial environment. This appliance is no[...]

3 IMPORT ANT INFORMA TION FOR CORRECT DISPOSAL OF THE PRODUCT IN A CCORD ANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must be taken to a special local authority waste collection centre or to a dealer providing appliance recycling services. Disposing of a household appliance separately avoids possible negative conse[...]

4 • Steam cleaners must not be used when cleaning this appliance. • The performance of your extractor will vary depending on a number of factors. These include: type of extraction, length of ducting, room volume, ventilation available and cleanliness of the filters. Note: For best performance, you should switch on the extractor 15 minutes befo[...]

5 Using Y our Extractor (ECA R ange) Control Panel A - Light button B - Speed level buttons C - Power o button T o switch the extractor light on or o: • Press button “ A ” . T o switch on the extractor or to change the speed at any time when the extractor is running: • Press the relevant “B ” button for the first, second or third[...]

6 Using Y our Extractor (EV A R ange) Control Panel A - Speed level keys B - Light key C - O key T o switch on the extractor or to change the speed at any time when the extractor is running: • T ouch the relevant key “ A ” for the first, second or third speed level as required. T o switch the extractor light on or o: • T ouch key “[...]

7 Care and Maintenance IMPORT ANT : DO NOT PERFORM MAINTENANCE OR CLEANING OF THE EXTRA CT OR WITHOUT FIRST SWIT CHING OFF THE ELECTRICITY SUPPL Y . Cleaning Y ou should use a nonabrasive cleaner . Any abrasive cleaner (including Cif ) will scratch the surface and could erase the control panel markings. Y ou can clean your extractor eectively by[...]

8 T o remove the grease filter • Open the hinged panel as shown in Fig. 3. • Push in the button on the handle and then pull down on the filter at the top as shown in Fig. 4. • When you have released it at the top, then you can pull the filter out completely . After rinsing and drying, reassemble the grease filter to the hood by reversing [...]

9 The LED Lights The light bulbs are high eciency 3V 3W LEDs. These lights are designed to last for the lifetime of the product and are not user-replaceable. In the unlikely event of a problem with these lights contact CD A Customer Care for assistance. The lights are designed for use during cooking and not for general room illumination. Extende[...]

10 Mains Electricity Connection THIS APPLIANCE MUST BE CONNECTED T O THE MAINS SUPPL Y B Y A COMPETENT PERSON, USING FIXED WIRING VIA A DOUBLE POLE SWIT CHED FUSED SPUR OUTLET AND PROTECTED B Y A 3A FUSE. W e recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E. [...]

11 Assembly and electrical connection should be carried out by specialised personnel. When installing this product we recommend you seek the help of another individual. Electrical Information Mains electrical voltage: 230 – 240V ac T otal rated power consumption: 126W If your extractor is not working: 1. Check that the mains supply has not been s[...]

12 Mounting Y our Extractor Y our extractor can be used to filter and recycle the air within your kitchen, or to extract the air outside. When installing this appliance over a CD A hob, the clearance between the extractor and the hob must be equal to or ex ceed 550mm. This instruction overrides the instructions supplied with the CD A hob. (The hei[...]

13 Installation The metal casing of this appliance has been coated with a preservative to protect it during transport and storage. This should be removed during installation by using a non-abrasive stainless steel cleaner . Always follow the instructions given with the cleaner being used. When correctly installed, your product meets all safety requ[...]

14 IMPORT ANT SAFETY W ARNING: ONL Y USE THE SCREWS PROVIDED WITH THE EXTRA CTOR T O MOUNT THE DUCTING ADAPT OR. THE USE OF L ONGER SCREWS MA Y CA USE D AMAGE T O THE INTERNAL WIRING WHICH WILL NO T BE COVERED B Y THE W ARRANTY . Tools required 8 T ools required. Fig. 7 M ar k wa ll as require d ( see F ig. 5) F ig. 8 Mark out wall as required, see[...]

15 Fix ducting and seal joints. Adjust and secure the chimney . Fit ducting adaptor Fig. 11 Fig. 11 Fit the ducting adaptor . Fig. 12 M oun t th e l ower c hi mney F ig. 13 Mount the chimney . Fig. 13 Adjus t an d secure th e upper c himney Fig. 14 Fig. 14 F ix ducting (seal joint) Fi g . 12[...]

16 NO TES[...]

17 NO TES[...]

18 NO TES[...]

19 E & O E. All instructions, dimensions and illustrations are provided for guidance only . CDA reserve the right to change specifications without prior notice. Attribute Symbol Units Model Identification ECA60 EVA60 & EVA90 Annual Energy Consumption AEC Hood 61.6 61.6 kWh Time increase factor f 1.7 1.7 Fluid Dynamic Efficiency FDE Hood 9.[...]

Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www. cda.eu www .cda.eu Please contact our Customer Care Department for Service on the details below Customer Care Department The Group L td. • Harby Road • Langar • Nottingh[...]