CDA HG6300 manuale d’uso

Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www .cda.eu hg6300 , hg6310 & hg6320 Gas Hobs Manual for Installation, Use and Maintenance[...]

2 Important The manufacturer cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that we reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance. This appliance is not designed to be used by people (includi[...]

3 safety (L VD) and Electromagnetic interference compatibility (EMC). Parts intended to come into contact with food conform to EEC/89/109 . IMPORT ANT INFORMA TION FOR CORRECT DISPOSAL OF THE PRODUCT IN A CCORD ANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must be taken to a special local authority waste collection [...]

4 • This hob (Class 3) has been designed for use only as a cooking appliance. Any other use (e. g. heating rooms) should be considered incorrect and potentially dangerous. • These instructions are valid only for the countries of destination, the symbols of which appear on the cover and on the appliance.[...]

5 Using Y our Hob Fig. 1 Gas burners: Gas flow to the burners is controlled by the control knobs (5, 6, 7 and 8 on the diagrams on pages 6 & 7). There are 3 positions shown on the control panel. T urning the control knob to the positions shown below achieves the following: Closed (OFF position) Maximum position: Provides fast boiling function [...]

6 g hg6300 Fig. 2 hg6310 Fig. 3 3 3 3 3 2 1 4 4 5 6 7 8 5 6 7 8[...]

7 K ey to Figs 2, 3 & 4 Gas burners: 1. T riple burner 3.5k W 2. R apid burner 3. 0k W 3. Semi-Rapid burner 1. 75k W 4. Auxiliary burner 1. 0k W Control panel: 5. Front left burner control knob 6. Back left burner control knob 7 . Back right burner control knob 8. Front right burner control knob These appliances are class 3 hg6320 Fig. 4 3 1 4 [...]

8 Igniting the Burners The hob is fitted with a flame failure device. Flame failure devices operate by shutting o the supply of gas to the burner in the event that the flame is extinguished accidentally . T o ignite the burners, follow these instructions: 1. Lightly press the control knob down and turn the knob anticlockwise to the maximum po[...]

9 Fig. 6 Ecient Use of Y our Hob The hob is equipped with burners of dierent sizes, designed to accommodate most shapes and sizes of pan. For best results, only use pans with flat bottoms and choose an appropriate burner depending on the size of the pan. The most ecient use of the hob is shown below , where the pan and burner are correctl[...]

10 Correct Use of the Optional W ok P an Adaptor (hg6310 & hg6320 only) The wok pan adaptor is a special stand that is designed to be fitted over the triple ring burner to give support to round bottomed woks. When using a wok, always place the wok pan adaptor in position over the pan support on the triple ring burner as shown in Fig.5. IMPORT [...]

11 Care and Maintenence As the hob has a stainless steel or enamel surface, you should use a nonabrasive cleaner . Any abrasive cleaner (including Cif ) will scratch the surface and could erase the control panel markings. Stainless steel can be eectively cleaned by simply using a dilute solution of water and mild detergent and drying to a shine [...]

12 T otal rated gas input : 7 .5kW (hg6300) 8. 0kW (hg6310 & hg6320) Mains electrical voltage: 230 – 240V ac, 50Hz T otal rated electrical consumption: <1W If Y our Hob is Not W orking 1. Check that the mains supply has not been switched o . 2. Check that the fuse in the spur has not blown. 3. Ensure that the burner components are not e[...]

13 Mains Electricity Connection THIS APPLIANCE MUST BE CONNECTED T O THE MAINS SUPPL Y B Y A COMPETENT PERSON, USING FIXED WIRING VIA A DOUBLE POLE SWIT CHED FUSE SPUR OUTLET AND PROTECTED B Y A 3A FUSE. W e recommend that the appliance is connected by a qualified electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E. T[...]

14 Gas Supply R equirements IMPORT ANT : THIS APPLIANCE SHOULD BE FITTED B Y A GAS SAFE REGIS TERED FITTER OR OTHER SUIT ABL Y QU ALIFIED PERSON. •  ThisinstallationmustcomplywiththeGasSafety(installationand use) R egulations 1984. •  ThisapplianceiscategoryII2H3+andisdesigned[...]

15 Room V olume (m 3 ) 5 6 to 10 6 to 11 11 or more Air V ent Required (cm 2 ) 100 50 No permanent vent required if a door opens to the outside None required V entilation All rooms require a window or equivalent (e.g. a door) which can be opened. Some rooms require a permanent vent in addition to a win- dow (see below). This unit must not be used i[...]

16 Natural Gas to LPG Conversion This hob can be converted from natural gas to propane operation at a nominal inlet pressure of 37mbar , or butane operation at a nominal inlet pressure of 28/30mbar . This conversion must only be carried out by a competent person (i.e. a Gas Safe registered fitter). Instructions to t replacement injectors: 1. Di[...]

17 LPG to Natural Gas Conversion This hob can be converted from propane operation at a nominal inlet pressure of 37mbar or butane operation at a nominal inlet pressure of 28/30mbar to natural gas at 20mbar . This conversion must only be carried out by a competent person (i.e. a Gas Safe registered fitter). R equired: •7mmAFnutspin[...]

18 Fitting the Hob Unpacking the hob: T ake care not to lose or mishandle any parts. Fitting position of the hob: This appliance must be installed a minimum of 50mm from any back wall and a minimum of 150mm away from any adjacent vertical surfaces, e.g. a tall cupboard end panel. This may be reduced to 100mm if the adjacent surface is resistant to [...]

19 Fig. 11 15mm V entilation slot > 30mm withstanding temperatures 65°C above ambient or greater (typically 80-90°C). •  If there is no oven to be built in below the hob it is recommended that, an isolation shelf should be fitted to protect the user from high temperatures. If the hob is to be installed above a working drawer , then a [...]

20 2. Position the hob seal, as shown in the diagram below (Fig. 14), ensur - ing that the ends meet without overlapping. Do not use silicone type sealant. 3. Secure the hob to the worktop using the fixing brackets and screws supplied, as shown in the following diagram (Fig. 15). R emove any ex cess sealant after tightening the brackets. 400mm 750[...]

21 NO TES:[...]

22 NO TES:[...]

23 E & O E. All instructions, dimensions and illustrations are provided for guidance only . CDA reserve the right to change specifications without prior notice. NO TES:[...]

Please contact our Customer Care Department for Service on the details below Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : customer .care@cda.eu W : www. cda.eu © CDA 2014[...]