CDA HN6110 manuale d’uso

Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu hn6110 Induction Hob Manual for Installation, Use and Maintenance[...]

2 Important The CD A Group L td cannot be held responsible for injuries or losses caused by incorrect use or installation of this product. Please note that CD A reserve the right to invalidate the guarantee supplied with this product following incorrect installation or misuse of the appliance or use in a commercial environment. This appliance is no[...]

3 2004/108/EC. Parts intended to come into contact with food conform to 89/109/EC. IMPORT ANT INFORMA TION FOR CORRECT DISPOSAL OF THE PRODUCT IN A CCORD ANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must be taken to a special local authority waste collection centre or to a dealer providing appliance recycling servi[...]

4 surface prior to use. • Do not modify the appliance in any way as this will invalidate the guarantee and is potentially dangerous. • The hob top is not designed for any use other than cooking: any other use (e.g. as a worktop) is potentially dangerous and will invalidate the guarantee. • This appliance must be connected to x ed wiring an[...]

5 capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. • Children shall not play with the appliance. • Cleaning and user maintenance shall not be made by children without supervision. • Metal objects such as knives[...]

6 divider must be made of material capable of withstanding 65°C above ambient temperature. • Never place inammable items or materials in a drawer or cupboard below the hob. Precautions in the event of an appliance fault • If a fault is noticed, switch o the appliance and turn o the electricity supply . • W arning: If the ceramic gla[...]

7 FOR THOSE WITH HEART P A CEMAKERS OR A CTIVE IMPLANTS: The function of this hob conforms to current electromagnetic interference standards and thus is in total compliance with legal requirements (2004/108/CE directives). T o avoid interference between your hob and a pacemaker , your pacemaker must be designed and programmed in compliance with the[...]

8 Cooking On Induction The principle of induction cooking is based on magnetic eect. When you put your cookware on an induction zone and switch it on, the electronic boards in the hob produce induced currents in the base of the cookware and instantly raise its temperature. This heat is then transferred to the food inside the cookware. The best c[...]

9 Using Y our Hob Fig. 1 Control panel: 3. Power key 4. Timer display 5. Zone selection keys 6. Zone displays 7 . - key 8. + key 9 . Timer control light Zones: 1. Front L eft 1.85 kW 175 mm 2. R ear Left 1.4 k W 175 mm 3. R ear Right 1.85 kW 175 mm 4. Front Right 1.4 kW 175 mm 4 7 5 3 6 8 9 2 1 3 4[...]

10 Using Y our Hob The table below oers guidance as to what each power level is for . T o switch the hob on T o switch the power on, touch and hold the key for appro ximately two seconds. The hob will beep and all zone displays will show zero. Please note: If a power level is not set within ten seconds, the hob will switch o automatically . T[...]

11 T o turn the power o T o switch o a single zone, touch the “Selection” key for the zone no longer required. T ouch the “-” key until the zone display shows zero. When all zones are at zero, the hob will switch o automatically after appro ximately ten seconds. Alternatively , to switch o the hob immediately , touch and hold th[...]

12 • T ouch both the “+” and “-” keys at the same time to select the timer . The timer display will show “00” . • Set the required duration using the “+” or “-” keys within ve seconds. T ouching the “-” key will go straight to 30 minutes. T ouch and hold the timer “+” or “-” keys to scroll through the duration[...]

13 Minute minder When no cooking zones are being used, the timer can be used as a minute minder . T o Set the Minute Minder • T ouch both the “+” and “-” keys at the same time to select the timer . The timer display will show “00” . • Set the required duration using the “+” or “-” keys within ve seconds. T ouching the “[...]

14 T o turn o the key lock If the hob is not already turned on, turn it on by touching the key . T ouch the “-” key and the “Zone selection” key for the front right zone at the same time, then touch just the “-” key . The hob beeps to conrm the key lock is switched o , then the hob switches o . When turning the hob back on t[...]

15 zone. The zone will switch o after appro ximately one minute if no suitable pan is placed on the zone. Ecient Use of Y our Hob The hob is equipped with zones of dierent sizes, designed to accommodate most shapes and sizes of pan. For best results, only use pans with at bottoms and choose an appropriate zone depending on the size of t[...]

16 Care and Maintenance Always disconnect the appliance from the power supply before undertaking any cleaning or maintenance. Important: • S team cleaners must not be used when cleaning this appliance. • Y ou should use a non-abrasive cleaner to clean the hob top. Any abrasive cleaner (including Cif ) will scratch the surface and could erase th[...]

17 In the event of a fault with the hob, please advise CD A Customer Care of any fault code shown on the display Contact CD A Customer Care A: Customer Care Department, The CD A Group Ltd, Harby R oad, Langar , Nottinghamshire, NG13 9HY T: 01949 862 012 F: 01949 862 003 E: service@cda.eu W: www .cda.eu T roubleshooting On rst use Y ou observe th[...]

18 In use Y ou observe that Possible Causes What should you do ? One or all of the zones cuts out. The safety system has cut out. Leave hob to cool then try it again A cooking zone has been running for a very long time Switch it on again (if required). One or more control keys are covered. Clear any objects and clean liquid from the control area. A[...]

19 IMPORT ANT - PLEASE NOTE: In the event of any breakage , crack or cracking – even minimal – of the vitroceramic glass, immediately disconnect your appliance to prevent a risk of electric shock and contact CD A Customer Care. IMPORT ANT : When correctly installed, your product meets all safety requirements laid down for this type of product. [...]

20 damage to the hob and constitutes incorrect installation, which is not covered by the warranty . Notes: • This could be a simple slot cut out of the plinth, or a dedicated ventilation grille. • The furniture top rail should not be fitted to the unit. This allows the induction hob to exhaust air into the kitchen space. • The recommended ve[...]

21 temperature. • Never place perishable foods, soft items such as tea towels, cleaning products or ammable items in the cupboard or drawer below the appliance. • If an oven is to be installed below the hob, the thermal safety system on the hob may not allow the hob to be used at the same time as a pyrolytic programme on the oven. • The ho[...]

22 How to Install the Hob: Overall dimensions of the hob: Width: 590 mm Depth: 520 mm W orktop cut-out dimensions: Width: 560 mm Depth: 490 mm 1. Make the required hole in the worktop. Before doing this, you must check the instructions supplied with any cooker hood to ensure that you will have the required clearance. The cut-out (Fig. 5) shows a 60[...]

23 Mains Electricity Connection W arning! this appliance must be earthed W e recommend that the appliance is connected by a qualied electrician, who is a member of the N.I.C.E.I.C. and who will comply with the I.E. T . and local regulations. This hob is intended to be connected to permanent fix ed wiring by a double pole switch, having a contac[...]

24 connection bo x. • As the appliance is not tted with an accessible plug, a means of disconnection from the power supply must be must be included in the fix ed insatllation, in accordance with the installation regulations. • The inlet cable must be positioned so that it does not touch any of the hot parts of the hob or oven. Caution • T[...]

25 The following diagram shows the mains connection: * Calculated using the diversity factor following the standard EN 60 335-2-6/1990 . Any service call arising from incorrect installation may result in a charge. CD A and its representatives cannot be held responsible for any matters resulting from incorrect connection, or related to either the ab[...]

26 NO TES[...]

27 NO TES[...]

Please contact our Customer Care Department for Service on the details below Customer Care Department • The Group Ltd. • Harby R oad • Langar • Nottinghamshire • NG13 9HY T : 01949 862 012 F : 01949 862 003 E : service@cda.eu W : www .cda.eu[...]