Christie Digital Systems DHD800 manuale d’uso

DHD800 USER MANUAL 020-000244-01[...]

[...]

= Lens not included. User ’ s Manual[...]

2 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) This Multimedia P rojector is designed with most advanced tec hnology f or portabilit y , durability , and ease of use. T his projector utilizes built-in multimedia f eatures. U Functionally Ric h U Simple Computer S ystem Set ting The projector has the Multi-scan sy stem to conform to almos[...]

3 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. DLP is a registered trademark of T e xas Instruments. BrilliantColor and DynamicBlac k are trademarks of T exas Instr uments. T able of Cont ents Feat ur e[...]

4 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) CA UTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P AR TS INSIDE EX CEPT LAMP REPLACEMENT . REFER SERVICING T O QUALIFIED SER VICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGEROUS V OL T A GE CONSTI TU TING A RISK OF ELECTRIC SHOCK IS PRESENT [...]

5 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) All the saf ety and operating instr uctions should be read before the product is operated. Read all of the instr uctions given here and retain them for later use. Unplug this projector from A C power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. F ol[...]

6 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Openings in the cabinet are provided f or ventilation. T o ensure reliable operation of the product and to protect it from ov erheating, these openings must not be bloc ked or cov ered. CA UTION Hot air is exhausted from the e xhaust vent. When using or installing the projector , the follo wing pr[...]

7 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Saf ety Instr uctions Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. This projector can project the pict ure in upward, down ward, or inclined position in perpendicular direction to the horizontal pla[...]

8 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Mo ving the Pr ojector CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR – Do not drop or bump the projector , other wise damages or malfunctions may result. – When carr ying the projector , use a suit able carr ying case. – Do not transport the projector by courier or an y other transpor[...]

9 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) The A C P ow er Cord supplied with this projector meets the requirement for use in the countr y you purc hased it. AC P ow er Cord for the Unit ed Stat es and Canada: A C P ower Cord used in the United States and Canada is listed by the Under writers Laboratories (UL) and certified by the Canadian[...]

10 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) H 8E G F r ont B DJ L < Bac k D Pr ojection Lens (Option) J Indicat ors 8 Infrared Remot e Receiver (Fr ont) E Handle G Adjustable Feet L Side Control H T er minals and Connectors < Main On/Off Switc h B Po wer Cor d Connector  Lamp Cover  CA UTION Hot air is exhaust[...]

11 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) T er minals and Connect ors  R/C JA CK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (not supplied). D USB CONNECTOR (Ser ies B) USB connector is used to ser vice the projector . H S-VIDEO INPUT JA CK Connect the S-V[...]

12 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) E FOCUS butt on Adjust the f ocus. (p.28) 8 ZOOM butt on Zoom in and out the images. (p.28) D ON/S T AND-B Y but ton T urn the projector on or of f . (pp.24,25)  INPUT butt on Select an input source Input 1, Input 2, Input 3 or Input 4. (pp.32-34) H AUT O PC ADJ . but ton A u[...]

13 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Indicat ors D J 8 E G L H 8 W ARNING TEMP . indicat or This indicator flashes red when internal projector temperature is too high. (pp.72, 79-81) H LAMP 2 REPLACE indicator T urn orange when the lif e of the projection lamp2 draws to an end. ( pp.68, 80 ) D POWER indicator This indicator[...]

14 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Remot e Contr ol P art Names and F unctions D G 8  <  E   J L B      8 LIGHT butt on Light the but tons on the remote control for about 1 0 seconds. E MENU butt on Open or close the On-Screen MENU. (pp.26-27) G POINT 54  but [...]

15 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Remot e Contr ol Batt ery Installation 12 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. T wo AA size batter ies F or correct polarity (+ and –), be sure bat ter y terminals are in contact with pins in the compartment. T o ensure [...]

16 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . Switc hing the remote control codes prev ents interf erence from other remote controls when sev eral projectors or video equipment next to eac h other are operated at the same time. Change the remote con[...]

17 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Installation Lens Installation Bef ore set ting up the projector , inst all Projection L ens on the projector . Bef ore installation, c hec k where the projector is used and prepare a suit able lens. F or the specifications of Projection L ens, contact sales dealer where you purc hased the projec[...]

18 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Lens Shif t A djustment Installation 20% 15% 41 .6% 67 .7% Lens shif t adjustable rang e Lens shif t center position Shif t range =  Note: = When the lens is shif ted beyond the described range of operation, the screen edges may become dark er or the images may become out of f ocus. F or other[...]

19 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) T er minals of Pr oject or The projector has two replaceable Interf ace board slots. The projector's functions can be extended b y installing the optional interface boards into the terminal slots. F or the Optional Interface B oards, cont act sales dealer where you purc hased the projector .[...]

20 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Installation Connecting t o Computer VG A Cable Monitor Output Desktop type Laptop type T er minals of the project or D VI-D Cable BNC Cable Monitor Output Unplug the pow er cords of both the projector and external equipment from the A C outlet before connecting cables. G V H/HV R B DIGIT AL ANAL[...]

21 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Installation Connecting t o Video Equipment Video Source (e xample) Video Casset te Recorder D VD Play er RGB SCAR T 21 -pin Output Y Pb/Cb Pr/Cr Y -Pb/Cb-Pr/Cr Component video output equipment. (suc h as D VD play er or high-definition TV source.) Co mponent V id eo Out put BNC Cable D VI-D Cabl[...]

22 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Installation At tac hing the Cable Tie Cable tie Y ou can dress and secure all cables to a cable tie (supplied). The cable tie is reusable and can be opened and closed as many times as needed. Cable tie T o loosen the cable tie Pull the tab in the arro w direction and loosen the cable tie. Ta b[...]

23 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Connecting the A C P ow er Cord Installation NOTE ON THE PO WER CO RD A C power cord must meet the requirements of the country where you use the projector . Confirm the A C plug type with the c hart below and proper A C power cord must be used. If the supplied A C pow er cord does not matc h your[...]

24 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) T ur ning On the Pr oject or Connect the projector’ s A C power cord into an A C outlet and t urn on the MAIN ON/OFF Switc h. T he LAMP indicator lights red and the PO WER indicator lights green. Press the ON/S T AND-B Y but ton on the side control or on the remote control. The LAMP indicator d[...]

25 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Press the ON/S T AND-B Y but ton on the side control or on the remote control, and “P ow er of f?” appears on the screen. Press the ON/S T AND-B Y but ton on the side control or on the remote control again to t urn of f the projector . The LAMP indicator lights bright and the PO WER indicator[...]

26 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Side Contr ol SELECT butt on Ho w to Oper ate the On-Scr een Menu MENU butt on SELECT butt on POINT butt ons On-Scr een Menu The projector can be adjusted or set via the On-Screen Menu. F or eac h adjustment and set ting procedure, ref er to the respective sections in this manual. Use the P oint [...]

27 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Menu Bar For Computer Source For Video Source Show the selected Menu of the On-Screen Menu. Used to select computer system (p.35). Used to select an image lev el among Standard, Real, Dynamic, and Image 1–1 0 (p.39). Used to adjust the size of the image. [Normal/Zoom/T rue/ F ull/Custom/Digit a[...]

28 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Oper ating with Pr ojector Contr ol Press the LENS SHIFT but ton and “Lens shif t” will be display ed on the screen. Use the P oint 54 but tons to position the screen to the desired point without having picture distortion. The amount of lens shif t range varies depending on the lens.[...]

29 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Basic Oper ation Infor mation Information displa y can be used to confirm the current operating condition of the projector and the signal being projected through the projector . Press the INFORMA TION but ton to display the information windo w on the screen. Press the P oint 4 but ton or the I[...]

30 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Oper ating with Remote Contr ol Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control to freeze the pic[...]

31 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) KEY ST ONE but ton Reduce the upper width with P oint 5 button. Reduce the lo wer width with P oint 4 button. Reduce the lef t part with P oint   button. Reduce the right part with P oint  button. • The white arro ws indicate that there is no correction. • A red arrow indicates the d[...]

32 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Remote Contr ol INPUT butt ons Input Press the INPU T 1, INPU T 2, INPU T 3 or INPU T 4 but ton on the remote control. The input source appears on the screen as you press eac h but ton. Select the connected input source. Remote Contr ol Operation Side Contr ol INPUT butt on Press the INPU T but t[...]

33 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Press the MENU but ton to display the On-Screen Menu. Use the P oint  but tons to mov e the red frame pointer to the INPU T Menu icon. Use the P oint 54 but tons to mov e the red arrow pointer to the desired input and then press the SELECT but ton. Then y ou can switc h to the desired in[...]

34 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) When the video input signal is connected to the S-VIDEO jac k, select S-video. When the video input signal is connected to the Y -Pb/Cb- Pr/Cr jac ks, select Y , Pb/Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video. When connecting to video equipment, select th[...]

35 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Comput er Syst em Selection This projector automatically t unes to various types of computers based on V GA, S V GA, XG A, SXGA, SXG A+, WXGA, UXG A, or WUXGA (ref er to “Compatible Computer Specifications” on pages 82-83). If a computer is selected as a signal source, this projector automati[...]

36 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) A ut o PC A djustment A uto PC A djustment function is provided to automatically adjust Fine sync, T otal dots, Horizontal and V ertical positions to conform to y our computer . Press the MENU but ton to display the On-Screen Menu. Use the P oint   but tons to mov e the red frame pointer[...]

37 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Manual PC A djustment Some computers employ special signal f ormats whic h may not be t uned by Multi-Scan sy stem of this projector . Manual PC Adjustment enables y ou to precisely adjust sev eral parameters to matc h those special signal formats. The projector has 1 0 independent memor y areas [...]

38 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Exit the PC A djust Menu. T o store the adjusted data, select Store and then press the SELECT but ton. Move the red arro w pointer to one of the Mode 1 to 1 0 in whic h you want to store, and then press the SELECT but ton. T o reset the adjusted data, select Reset and press the SELECT but ton. A [...]

39 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Press the MENU but ton to display the On-Screen Menu. Use the P oint  but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint 54 but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU N[...]

40 DHD800 User Manual 020-000244-01 Rev .1 (08-2010)  Note: • T rue, F ull, and Digital zoom +/– cannot be selected when no signal is detected in the PC Sy stem Menu. (p.35) • The projector cannot displa y the resolution higher than 1 920 x 1200. If your computer’ s screen resolution is higher than that, low er the resolution before conn[...]

41 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Select Digital zoom +. T he On-Screen Menu disappears and “D . zoom +” appears. Press the SELECT but ton to expand the image size. Use the P oint 54 but tons to pan the image. The P anning function can work only when the image is larger than the screen size. Y ou can also enter the D[...]

42 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) A V S Y STEM MENU (VIDEO OR S-VIDEO) A V S Y STEM MENU (COMPONENT VIDEO) V ideo Syst em Selection Press the MENU but ton to display the On-Screen Menu. Use the P oint  but tons to mov e the red frame pointer to the A V S ystem Menu icon. Use the P oint 54 but tons to mov e the red arrow [...]

43 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Press the MENU but ton to display the On-Screen Menu. Use the P oint  but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint 54 but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Imag[...]

44 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Scr een Siz e A djustment Press the MENU but ton to display the On-Screen Menu. Use the P oint  but tons to mov e the red frame pointer to the Screen Menu icon. Use the P oint 54 but tons to mov e the red frame pointer to the desired function and then press the SELECT but ton. 1 2  No[...]

45 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Ke ystone This function is used to store or reset the k ey stone correction when the Main On/Of f S witc h is pressed to Of f or the A C pow er cord is unplugged. Use the P oint  but tons to switc h between eac h option. Store . . . Keep the k ey stone correction ev en when the Main On/O[...]

46 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Press the MENU but ton to display the On-Screen Menu. Use the P oint  but tons to mov e the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint 54 but tons to mov e the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dial[...]

47 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) A uto pictur e control Use the P oint  but tons to select the desired A uto picture control position (Of f , L1 or L2). Of f .... A uto picture control OFF position. L1 ..... A uto picture control LEVEL 1 position. L2 ..... A uto picture control LEVEL 2 position. Clear the c heck mark if[...]

48 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Use the P oint  but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 15). Gamma Press the P oint  but ton to decrease the sharpness of the image; press the P oint  but ton to increase the sharpness of the image (from 0 to 31). Shar pness An interlac[...]

49 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Press the MENU but ton to display the On-Screen Menu. Use the P oint  but tons to mov e the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a vailable in English, German, F renc h, It alian, Spanish, P ortuguese, Dutc h, Sw edish, Russ[...]

50 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Back ground The selected bac kground screen will be displa yed when no input signal is detected. Blue . . . Blue colored bac kground. User . . . The image y ou captured. Blac k . . . Blac k colored back ground. Set ting Lamp control This function allo ws you to c hange brightness of the screen. 2[...]

51 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Set ting Pictur e in Pictur e This function is used to project two videos simultaneously by placing a separate small sub screen within or next to the main screen. Use the P oint 54 but tons to mov e the red frame pointer to Picture in Pict ure and then press the SELECT button to displa y a dialog[...]

52 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Set ting Edge blending This function allo ws multiple projector images to be seamlessly ov erlapped. Use the P oint 54 but tons to mov e the red frame pointer to Edge blending and then press the SELECT but ton to display a dialog box. Use the P oint 54 but tons to adjust the setting valu[...]

53 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Set ting Adv anced color matc hing ..... Set to ‘On‘ to activate the ‘ Adv anced color matc hing’ . When it is set to ‘Of f‘ , all items ex cept for ’T est pattern ’ are display ed in gray out and cannot be adjusted. Measured ........ When using the color wheel set optimized for h[...]

54 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) This function allo ws you to customiz e the screen logo with Logo select, Capture, and L ogo PIN code loc k functions. Logo  Note: • Bef ore capturing an image, select “Standard” in the Image Select Menu to capture a proper image. (pp.39, 43) • A signal from a computer can be captured [...]

55 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Change the Log o PIN code lock set ting Af ter a correct Logo PIN code is entered, the follo wing dialog box appears. Use the P oint  but tons to switc h On/Of f , This function pre vents an unauthoriz ed person from c hanging the screen logo. Of f .... T h e screen logo can be c hanged [...]

56 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Choose the running speed of cooling f ans from the follo wing options. Normal ....... Normal speed. Max ........... Faster than the normal speed. F an control Set ting Filter contr ol This function does not w ork in the default state. When a filter cartridge (supplied) has been installed in the p[...]

57 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) P ow er management Time lef t before the lamp is of f Press the SELECT but ton at Po wer management and the dialog box appears. Use the P oint  but tons to c hoose one of the three options. Press the P oint 4 button to select the timer , and then use the Point   but tons to set [...]

58 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Secur ity Ke y lock Ke y lock Secur ity Select Ke y loc k and this box appears. Choose one of the alternatives with the P oint 54 but tons and select [Y es] to activate it. This function loc ks the side control and remote control but tons to prev ent operation by unauthoriz ed persons. ..... U[...]

59 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Change the PIN Code Change the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON P AGE 88, AND KEEP IT SECUREL Y . IF Y OU FORGET Y OUR PIN CODE, THE PROJECTOR CAN NO L ONGER BE ST ARTED. The PIN code can be c hanged to your d[...]

60 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Set ting Shutt er Shut ter function is available to bloc k out light to the screen, so that the screen can be used for the other presenters. Prohibits the shut ter operation from the remote control and the projector's side control. Remote control ... Selecting "On" prohibits the sh[...]

61 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Video dela y control When you w ant to make a digital processing of a projected image faster , set this function. Use the P oint  but tons, select an item of Of f/Low/Mid/ High. Digital processing speed becomes fast by order of L ow A Mid A High. High is the fastest.  Note: • The fo[...]

62 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Filter count er This function does not w ork in the default state. When a filter cartridge (supplied) has been installed in the projector , it works as follo ws: This function is used to set a time f or the filter replacement. Use the P oint 54 but tons to mov e the red frame pointer to Filter co[...]

63 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) F actory def ault This function ret urns all set ting values ex cept for the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , filter counter and filter timer to the factory default set tings. F actory def ault Quit Exit the Set ting Menu. Select Factory default and this box appears.[...]

64 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Maint enance and Car e Filt er Instr uctions Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef f ectiveness and ma y result in internal heat buildup and adversely af f ec[...]

65 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Installing the Filt er Cartr idg e Maint enance and Car e T urn of f the projector , press the Main On/Of f Switc h to Of f and unplug the A C pow er cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Open the filter cov er . (See the right figure.) [...]

66 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Scr oll counter Reset ting the Filt er Counter Filter count er Select Reset and the “Filter counter Reset?” appears. Select [Y es], then another confirmation box appears. Select [Y es] again to reset the Filter counter . Off Select “Used time ” and the dialogue box belo w appears. Select [...]

67 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Lamp Manag ement This P rojector is equipped with 2 Projection Lamps to ensure brighter image and those lamps are controlled b y the Lamp Management F unction. T he Lamp Management F unction detects the st atus of lamps and sho ws the status on screen or on the LAMP 1/2 REPLA CE indicators. T his[...]

68 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Maint enance and Car e Chec k the number of lamp to be replaced on the Lamp Status Display . Loosen a scre w on the Lamp Cov er . Slide and open the Lamp Cov er . (See the right figure.) 1 3 Loosen two scre ws and pull out the Lamp to be replaced by grasping handle. 4 T urn of f the projector , p[...]

69 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. L Lamp lif etime may dif f er from lamp to lamp and according to the environment of use. There is no guarantee of the same lif etim[...]

70 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Maint enance and Car e Optional Color Wheel Installation The projector comes with the high brightness color wheels installed. Additional ric h color reproduction color wheels are supplied. T o replace the color wheels, ref er to the follo wing steps.  Note: • W ait until the lamp house and t[...]

71 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) T urn of f the projector , press the Main On/Of f Switc h to Of f and unplug the A C pow er cord from the A C outlet before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercial[...]

72 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) The W ARNING indicators show the state of the function whic h protects the projector . Chec k the state of the W ARNING TEMP . indicator and the LAMP indicator to t ake proper maintenance. W arning Ind icators The projector is shut down and the WARNING TEMP . indicator is blinking red. When the t[...]

73 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) T roubleshooting Bef ore calling your dealer or service center for assistance, c hec k the items below once again. 1 . Mak e sure you ha ve properly connected the projector to peripheral equipment as described on pages 20–21 . 2. Chec k the cable connection. Make sure that all computers, video [...]

74 DHD800 User Manual 020-000244-01 Rev .1 (08-2010)  appears on the scr een – The end of lamp lif e is approac hing. Replace the lamp with a new one promptly . (See page 68) appears on the scr een When a filter cartridge (supplied) has been installed in the projector; – The filter is out of scroll. R eplace the filter cartridge with a new o[...]

75 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) W ARNING: High voltag es are used t o operat e this pr ojector . Do not at tempt t o open the cabinet. If problems still persist af ter following all operating instr uctions, contact the dealer where you purc hased the projector or the ser vice center . Specify the model number and explain about [...]

76 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Menu T r ee Input RGB (PC analog) Go to Syst em (1) Input 1 Y , Pb/Cb,Pr/Cr Computer Input/V ideo Input RGB (Scart) RGB (PC digital) RGB (A V HDCP) Input 3 RGB Go to System (1) Go to Syst em (3) Go to Syst em (2) Video S-video Input 2 Go to Syst em (1) Input H-sync freq. V -sync freq. Projector I[...]

77 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Computer Input Syst em (1) Mode 1 Mode 2 Image Select Standard Real Image 1 Image 1 0 Scr een Normal Tr u e F ull Digital zoom + Digital zoom - PC Adjust Auto PC adj. Fine sync. T ot al dots P osition H P osition V Clamp Display area - H Display area - V Reset Mode free Store Quit 0–31 Y es/No [...]

78 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Computer Input/V ideo Input Appendix Setting Fan control All/F ront & T op/T op & Bac k/F ront & Bac k/ F ront/T op/Bac k Normal/Max Of f/Ready/Shut down 1–30 Min. Quit On/Of f Ke y lock Of f Projector Remote Control PIN code loc k Of f/On1/On2 PIN code c hange Filter counter Y es/N[...]

79 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Indicat ors and Pr ojector Condition Chec k the indicators for the projector condition. The pr ojector is oper ating nor mally . • • • on • • • of f • • • blinking at the normal rate (approx. 1 second ON, 1 second OFF) • • • dim • • • blinking slow (approx. 2 seconds[...]

80 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Appendix The pr ojector is det ecting abnor mal condition. Indicat ors Pr oject or Condition PO WER green LAMP red W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e The temperat ure inside the projector is elevated close to the abnormally high lev el. The temperat [...]

81 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Appendix The pr ojector is det ecting abnor mal condition. Indicat ors Pr oject or Condition PO WER green LAMP red W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP 1/2 REP . orang e If the Filter counter reac hed a time set in the timer set ting , a Filter replacement icon (Fig .2)[...]

82 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Compatible Comput er Specifications Basically this projector can accept the signal from all computers with the V - and H-F requency mentioned below and less than 230 MHz of Dot Cloc k. Appendix = “T r ue ” cannot be selected when WUXGA1, WXGA+2, UXGA1, UXG A2, UXGA3, UXG A4 and UXGA5 are sele[...]

83 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Appendix ON-SCREEN DISPLA Y RESOLUTION H-F r eq.(kHz) V -Freq.(Hz) 1 080p 1 920x1 080 33.750 30.0 00 1 920x1 080 28.125 25.00 0 1 920x1 080 27 .0 00 24.0 00 1 920x1 080 67 .50 0 60.0 00 1 920x1 080 56.250 50.0 00 1 080psf/30 1 920x1 080 33.750 60.0 00 1 080psf/25 1 920x1 080 28.1 25 50.0 0 0 1 08[...]

84 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Appendix List of Pictur e in Pictur e o : Picture in Pict ure combinations are enabled - : Picture in Pict ure combinations are disabled  Note: • As for Input 3 and Input 4, combination of digital signals for Main pict ure and Sub picture is not a vailable. • When the input signal(s) is/ar[...]

85 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) T echnical Specifications Mechanical Inf or mation Projector T ype Multi-media P rojector Dimensions (W x H x D) 1 5.75” x 9.55” x 20.57” (400.0 mm x 242.5 mm x 522.5 mm) Net W eight 43.0 lbs (1 9.5 kg) F eet Adjustment ± 5˚ DLP Chip Projection Sy stem 0.95” Single DLP c hip, High brigh[...]

86 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Optional P arts Model No. Optional Interface Board (DVI) : 1 03-1 341 09-0 1 Optional Interface Board (5-BNC) : 1 03-1 341 08-0 1 Optional Interface Board (Dual-SDI) : 1 03-1 341 07-0 1 The parts listed belo w are optionally av ailable. When ordering those parts, specify the item name and Model N[...]

87 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Configur ations of T er minals Appendix ANAL OG (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 CONTROL POR T CONNECT OR (D-sub 9 pin) DIGIT AL D VI-D (D VI 24 PIN) 1 9 17 2 10 18 3 11 19 4 12 20 5 13 21 6 14 22 7 15 23 8 16 24 USB CONNECT OR (Ser ies B) 2 34 1 Input Output 13579 11 13 15[...]

88 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) W rite down the PIN code number in the column belo w and keep it with this manual securely . If you f orgot or lost the number and unable to operate the projector , cont act the ser vice center . Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the f our -digit number be[...]

89 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Dimensions Unit: inc h (mm) Appendix 0.28(7 .0) 9.21(234.0) 9. 55 (242. 5 ) 4.4 5 (113.0) 20.47( 5 20.0) 20. 5 7( 5 22. 5 ) 1 5 .7 5 (400.0) 8.31(211.0) 5 .0º 5 .0º 19.96( 5 07.1) 96.0º 6.02(1 5 3.0) 5 .63(143.0) 6.81(173.0) 6.81(173.0) 5 .08(129.0) 4.6 5 (118.0) 2.64(67.0) 4.2 5 (108.0) 12.48[...]

90 DHD800 User Manual 020-000244-01 Rev .1 (08-2010) Ho w to adjust multiple scr eens With the Edge blending and Color matc hing functions, you can seamlessly displa y the images from more than t wo projectors. F ollow the steps belo w to adjust multiple projector images. Confirm if you use the same type of color wheel (high brightness or ric h col[...]

91 DHD800 User Manual 020-000244-01 Rev .1 (08-2010)  Note: • The o verlapping area might become une ven depending on the images. In suc h a case, it is recommended to decrease the contrast of the images in the Image A djust Menu or set the BrilliantColor function to ‘Of f’ . If the colors of the lef t and right images do not matc h, then [...]

[...]

[...]

For the most current technical documentation, please visit www .christiedigital.com USA – Cypress ph: 714-236-8610 Canada – Kitchener ph: 519-744-8005 United Kingdom ph: +44 118 977 8000 Germany ph: +49 2161 664540 France ph: +33 (0) 1 41 21 44 04 Hungary/Eastern Europe ph: +36 (0) 1 47 48 100 Singapore ph: +65 6877 8737 Shanghai ph: +86 21 627[...]