Christie Digital Systems LX66A manuale d’uso

✽ Projection lens is optional. User ’ s Manual 1 03-0 050 0 1 LX66A[...]

2 F eatures and Design This Multimedia Projector is designed with most advanced technology for portability, durability, and ease of use. This projecto r utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technology. ◆ Compatibility The projector widely accepts various video and comput[...]

3 T able of Contents Feat ur es and Design . . . . . . . . . . . . . . . . . . .2 T able of Cont ents . . . . . . . . . . . . . . . . . . . . . .3 T o The Owner . . . . . . . . . . . . . . . . . . . . . . . . .4 Saf ety Instructions . . . . . . . . . . . . . . . . . . . .5 Air Circulation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

4 T o The Owner CAUTION : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE EXCEPT LAMP REPLACEMENT. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE[...]

5 Safety Instructions All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. Follow all warnings and instructions m[...]

6 Safety Instructions Openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. CAUTION Hot air is exhausted from the exhaust vent. When using or installing the projector, the following precautions should be taken. – D[...]

7 Safety Instructions USE CAUTION IN CARRYING OR TRANSPORTING THE PROJECTOR – Do not drop or bump the projector, otherwise damages or malfunctions may result. – When carrying the projector, use a suitable carrying case. – Do not transport the projector by courier or any other transport service in an unsuitable transport case. This may cause d[...]

8 Compliance Feder al Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment ge[...]

9 Bottom Back Front q Remote Receiver w Projection Lens (Option) e Front Cover (inside Terminals) r Carrying Handle t Air Exhaust Vent y Indicators u Top Controls i Air Intake Vent o Air Filter (inside) !0 Lamp Cover !1 Adjustable Feet q w e t y u i o !0 !1 CAUTION Hot air is exhausted from the exhaust vent. Do not put heat-sensitive objects near t[...]

10 Prepar ation q w e r t y u q LAMP 1 REPLACE indicator Turns orange when the life of the projection Lamp 1 draws to an end. (p62, 67) w WARNING TEMP indicator Blinks red when the internal temperature of the projector is abnormally high. (p60,65) t READY indicator - Lights green when the projector is ready to be turned on and remains green lightin[...]

11 Prepar ation T op Control LENS SHIFT MENU CANCEL SELECT ZOOM FOCUS SHUTTER INPUT INFORMA TION AUTO PC ADJ. POWER P q w e r t y o i u u INPUT button Switches input sources. (p30) y AUTO PC ADJ. button Operates the Auto PC adjustment function. (p30) e CANCEL button Cancels the selection and returns to the previous menu. t INFORMATION button Displa[...]

12 Prepar ation ANALOG OUT INPUT 3 INPUT 1 INPUT 2 ANALOG IN DIGIT AL (DVI-D) VIDEO/Y Cb/Pb Cr/Pr G B R H/V V VIDEO/Y Cb/Pb Cr/Pr S-VIDEO T er minals q w e r e INPUT 3 terminals VIDEO/Y, Cb/Pb, and Cr/Pr Connect video or component output signal (Y, Cb/Pb, and Cr/Pr) from video equipment to these jacks with a video cable (RCA-type). (p23, 24) S-VIDE[...]

13 Prepar ation A built-in micro processor which controls this unit may occasionally malfunction and needs to be reset. This can be done by pressing the RESET button with a pen, which will shut down and restart the unit. Do not use the RESET function excessively. q e r t y u SERIAL PORT IN When controling the projector from a computer, connect the [...]

14 Prepar ation Remot e Contr ol MENU CANCEL INFO AUTO PC SCREEN FREEZE P-TIMER SOUND REMOTE VOL. MUTE CH ID LENS SHIFT KEYSTONE SHUTTER D.ZOOM ZOOM FOCUS ON-OFF MENU CANCEL INFO AUTO PC SCREEN FREEZE P-TIMER SOUND REMOTE VOL. MUTE CH ID LENS SHIFT KEYSTONE SHUTTER D.ZOOM ZOOM FOCUS ON-OFF q w u i e r y !0 o o ZOOM buttons Adjust zoom of the image.[...]

15 Prepar ation !1 SCREEN button Selects screen sizes. (p31) !2 INPUT 1-3 buttons Selects input source (INPUT 1 - INPUT 3). (p30) !0 AUTO PC button Operates the Auto PC adjustment. (p30) q MENU button Opens or closes the On-Screen Menu. (p33, 34) w FREEZE button Freezes the projected picture. (p31) !4 REMOTE RESET/ON/ALL-OFF switch When using the r[...]

16 Prepar ation This wireless remote control uses radio frequency signal. You can switch four frequency channels prepared and select a remote control ID from eight IDs. The Remote Control Channel selection prevents radio frequency interference from the other equipment and the Remote Control ID selection allows you to operate several projectors with[...]

17 Prepar ation Remot e Contr ol Bat tery Installation To insure safe operation, please observe the following precautions: ● Use (2) AA or LR6 type alkaline batteries. ● Always replace the batteries in sets. ● Do not use a new battery with a used battery. ● Avoid contact with water or liquid. ● Do not expose the remote control to moisture[...]

18 Install the projector in a safe place. Before installation, read Safety Instructions thoroughly and check the installation place. Install the projector in a place with sufficient strength to support the projector's weight. Installation on an unstable stand, cart, or ceiling may cause serious injury or accidents. Do not place the projector w[...]

19 Installation Adjustable feet Lens shift feature is provided to move the position of the projected image vertically by 50% and horizontally by 10% respectively without any image distortion. ✽ Lens shift range varies depending on lens and projectors. The range in this manual is the case of LNS-W04. Lev el A djustable F eet This projector has fou[...]

20 Installation Connecting A C P ow er Cord This projector uses nominal input voltages of 120 V or 200-240 V AC. This projector automatically selects correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce risk of electrical shock, do not plug into any other type of power system. [...]

21 Installation Terminals for connecting the AC power cord and other equipment are located in the front part of the projector for easy setup. The terminal area is covered with a front cover to protect from dust and others, and hide messy cable connections. The projector's front terminal area has two replaceable Interface board slots. The proje[...]

22 Installation Connecting t o Comput er (Digital and Analog RGB) Cables used for connection q VGA Cable (HDB 15 pin) Only one cable is supplied. w DVI-D Cable ✽ e BNC Cable ✽ r Serial Cross Cable (RS-232C) ✽ ( ✽ = Not supplied with this projector.) q Monitor Output DIGITAL (DVI-D) q Monitor Input SERIAL PORT IN Note: Unplug the power cords[...]

23 Installation Installation Connecting t o V ideo Equipment (Digital and V ideo) INPUT 3 VIDEO/Y Cb/Pb Cr/Pr S-VIDEO Cables used for connection q Video Cable w S-Video Cable e DVI-D Cable ✽ Cables are not supplied with the projector. Note: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting th[...]

24 Connecting t o V ideo Equipment (Component and RGB Scar t) INPUT 3 VIDEO/Y Cb/Pb Cr/Pr Cables used for connection q BNC Cable w Scart-VGA Cable e Component Cable ✽ Cables are not supplied with the projector. Note: Unplug the power cords of both the projector and external equipment from the AC outlet before connecting the cables. RGB Scart 21-p[...]

25 Basic Operation Basic Oper ation Oper ating the Pr oject or You can operate the projector with the projector's top control, the remote control or a USB mouse (not provided). he remote control can be used wireless or wired. Operational range of the wireless remote control is within about 32.8' (10m) from the projector. Operational range[...]

Operations & But tons Ref . P ages On-Of f 27 , 28 Lens Shif t ➔ P oint butt ons ➔ 29 Zoom ➔ P oint butt ons ( ed ) 29 Focus ➔ P oint but tons ( ed ) 29 Shut ter 29, 53 A uto PC A djust 30, 40 Input Selection (Input 1–5) 30, 36~37 Infor mation 30, 59 Ke yst one – ➔ 31, 48 Scr een Selection – 31, 47 Fr eeze – 31 P -Timer – 31[...]

27 Basic Operation Basic Operation Turn on the MAIN On/Off switch of the projector. The LAMP indicator lights red, and the READY indicator lights green. Press the POWER ON-OFF button on the top control or the remote control. The LAMP indicator dims, and the cooling fans start to operate. The preparation display appears on the screen and count-down [...]

28 Press the POWER ON-OFF button on the top control or the remote control, and a message “ Power off? ” appears on the screen. 1 2 3 Press the POWER ON-OFF button again to turn off the projector. The LAMP indicator brightly lights red and the READY indicator goes out. After approximately 90 seconds, the READY indicator will light green again an[...]

29 Basic Operation Basic Operation Press the ZOOM/FOCUS button and adjust with the Point buttons ( e and d ). Press the LENS SHIFT button and adjust the lens position with the Point buttons ( e , d , 7 , and 8 ) or with the Control pad. Shut t er F unction Shutter function allows you to completely block out light to the screen. Press the SHUTTER bu[...]

30 Basic Operation Inf or mation Choose either Input 1, Input 2, Input 3, Input 4, or Input 5 by pressing the INPUT button on the top control or the INPUT 1, INPUT 2, INPUT 3, INPUT 4, or INPUT 5 buttons on the remote control. Before using these buttons, correct input source should be selected through menu operation as described on pages 36~37. Inp[...]

31 Basic Operation Basic Operation Press the FREEZE button on the remote control to freeze the picture on screen. To cancel the Freeze function, press the FREEZE button again or press any other button. Press the P-TIMER button on the remote control. The timer display “ 00 : 00 ” appears on the screen and the timer starts to count time (00 : 00 [...]

32 Basic Operation Press the D. ZOOM button on the remote control once and then expand the image size with the SELECT button and pan the image with the Point buttons ( e , d , 7 , and 8 ) or the Control pad. D. Zoom – D. Zoom + Press the D. ZOOM button on the remote control twice and then compress the image size with the SELECT button. ✔ Note: [...]

33 Basic Operation Basic Operation LENS SHIFT MENU CANCEL SELECT ZOOM FOCUS Ho w t o Oper at e On-Scr een Menu The projector can be adjusted or set via the On-Screen Menu. Refer to the following pages for respective adjustment and setting procedure. Gently tap on the Control pad on the remote control to spin Menu icons. When the desired Menu icon c[...]

34 Basic Operation Menu icon Pointer (Yellow frame) Move the pointer with the Point buttons ( e and d ) , Control pad or mouse cursor to select an item and press the SELECT button or click the mouse. The selected item box will turns yellow. Item SELECT button Item data Click ed or move the bar to adjust the value. Control bar for Mouse Operation Th[...]

35 Basic Operation Basic Operation INPUT : selects input sources. Before selecting input sources with the top control or the remote control, correct input source should be selected through menu operation. SYSTEM : selects system of the connected computer and video sources. IMAGE : selects image levels suitable for the connected image source and all[...]

Input Press the MENU button to display the On-Screen Menu. Spin Menu icons with the Point buttons ( 7 and 8 ) or the Control pad and press the SELECT button when the INPUT icon comes right in front. 1 Move the yellow frame pointer with the Point buttons ( e and d ) or the Control pad to a input which you want to select. 2 Input 1 Move a pointer to [...]

37 Input Input Y, Pb/Cb, Pr/Cr When the input source is component coming from video equipment connected to the Input 3 (Y, Pb/Cb, Pr/Cr) terminal, select Y, Pb/Cb, Pr/Cr. Input 3 Move a pointer to Input 3 and press the SELECT button. Input 4/Input 5 When video input signal is connected to the Input 3 (VIDEO) terminal, select Video. Video When video[...]

PC System Menu 1 2 Custom Mode (1~50) set in the PC Adjust Menu. (p41, 42) This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, UXGA, or WXGA with its Multi- scan system and Auto PC Adjustment. If Computer source is selected in the Source Select Menu, this projector automatically detects the signal format [...]

39 System System AV System Menu (Video or S-Video) AV System Menu (Component) If the projector cannot reproduce proper video image, it is necessary to select a specific broadcast signal format from among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. Move the yellow frame pointer to a system and press the SELECT button to activate it. PAL / SECAM /[...]

40 Move the yellow frame pointer to the Auto PC adj. and press the SELECT button. PC Adjust Menu PC ADJ. icon To store adjustment parameters Adjustment parameters from Auto PC Adjustment can be memorized in this projector. Once parameters are memorized, the setting can be done just by selecting Mode in the System menu (p38). See Store on page 42. ?[...]

41 Computer Adjustment Press the MENU button to display On-Screen Menu. Spin Menu icons with the Point buttons ( 7 and 8 ) or the Control pad and press the SELECT button when the PC ADJ. icon comes right in front. 1 2 Move the yellow frame pointer to an item and press the SELECT button. PC Adjust Menu Adjust value with the Point buttons ( e and d )[...]

42 Adjust this item when the projected image is affected by the noise from the external equipment. (From 0 to 15) V-sync phase Reset Mode Exits the PC Adjust Menu. Quit Resets all adjustments to their previous levels. Vacant Mode shows the selected input, source and system, and values of “ Fine sync, ” “ Total dots, ” “ Clamp, ” “ Dis[...]

43 Image Adjustment Image Adjustment Image Menu (PC) Move the yellow frame pointer to an image level you want to select and then press the SELECT button. 1 Normal picture level preset on this projector for AV mode. Standard Picture level with improved halftone for graphics. Real Normal picture level preset on this projector for PC mode. Standard Pi[...]

1 2 Decrease or increase contrast with the Point buttons ( e and d ) or the Control pad. (From 0 to 63.) Adjust image darker or brighter with the Point buttons ( e and d ) or the Control pad. (From 0 to 63.) Contrast Brightness Lighten or deeper color with the Point buttons ( e and d ) or the Control pad. (From 0 to 63.) Adjust with the Point butto[...]

45 Image Adjustment Image Adjustment Move the pointer to one of the followings with the Point buttons ( e , d , 7 , and 8 ) or the Control pad and press the SELECT button. LIST .............displays Color Management List window to store the adjustment data. COLOR.M ..returns to the previous image with the Color management pointer. MENU .........dis[...]

[...]

47 Screen Setting Provides image to fit the horizontal size of the screen size. When the input signal is SXGA (5:4), the image is fully displayed at 4:3 aspect ratio. Full screen Adjusts aspect (scale and position) of the screen. Press the SELECT button at Custom. Custom will be displayed on the top left of the screen for four (4) seconds and then [...]

48 Press the SELECT button at the D. Zoom – . The message “ D. Zoom –” is displayed. Press the SELECT button to compress the image size. D. Zoom – Ceiling Rear When this function is “ On, ” the picture is top/bottom and left/right reversed. This function is used to project the image from a ceiling mounting the projector. When this fun[...]

49 Menu 1 2 Set ting Language The language used in the On-Screen Menu is available in English, German, French, Italian, Spanish, Portuguese, Dutch, Swedish, Russian, Chinese, Korean, or Japanese. This feature allows you to change the On-Screen Menu setting. Position When Position is selected, arrows appear in upward, downward, right and left direct[...]

50 Setting Logo Logo settings can be altered as follows: Logo select This function decides what to be displayed on the starting-up display as follows: Default . . . .the factory-set logo My logo . . .the image you captured Off . . . . . . .count-down only Capture This function enables you to capture the image being projected and use it for a starti[...]

51 Setting PIN Code Change Logo PIN code can be changed to your desired four-digit number. Select “ PIN code change ” with the Point buttons ( e , d , 7 , and 8 ) or the Control pad and press the SELECT button. Set a new Logo PIN code. Be sure to note the new Logo PIN code and keep it at hand. If you lost the number, you could no longer change [...]

52 On start When this function is “ On, ” the projector is automatically turned on just by switching MAIN ON/OFF SWITCH on. ✔ Note: Be sure to turn the projector off properly (see “ Turning Off the Projector ” on page 28). If the projector is turned off in the wrong steps, the On start function does not operate properly. Setting Display T[...]

53 Setting Analog out The ANALOG OUT terminal is for output of the analog signal coming from the ANALOG IN terminal in the Input 1 terminals. (See page 12.) Select “ On ” to enable the signal output through the ANALOG OUT terminal always except in the stand-by mode or “ Off ” to disable the signal output. Analog out is not available when se[...]

54 Setting Security Key lock This function locks operation from the top control and remote control. It is used to prevent the projector from being operated by an unauthorized person. Projector . . . . . . . locks operation from the top control. To unlock, use the remote control. Remote control . . locks operation from the remote control. To unlock,[...]

55 Setting The PIN code can be changed to your desired four-digit number. Select “ PJ PIN code change ” with the Point buttons ( e and d ) or the Control pad, and press the SELECT button. The PIN code input dialog box appears. Enter a current PIN code, and then a new PIN code as follows: Select a number with the Point buttons ( e , d , 7 , and [...]

56 Setting Factory default This function returns all setting values to the factory default settings except for those including: User logo, PJ PIN code, Logo PIN code, Security setting, Lamp time, Filter time, and PJ time. Select Factory default and this box appears. Select [Yes], and the next box appears. Factory default Quit Exits the Setting menu[...]

57 Special customizes control functions: Lamp, Fan control, Filter, Auto PC adj., Test pattern, RS- 232C, and USB memory and displays Warning log. ✔ Note: Be sure to reset the Lamp time only after replacing the lamp. 1 2 Press the MENU button to display On-Screen Menu. Spin Menu icons with the Point buttons( e , d , 7 , and 8 ) or Control pad and[...]

58 Special Auto PC adj. Select “ On ” to enable the Auto PC adjust function and “ Off ” to disable it. Refer to page 30 and 40 for Auto PC adjust function. Test pattern Various test patterns are prepared in this projector allowing users to test the projection. Select one from the following twenty kinds of patterns: Cross 1 (W), Cross 2 (R),[...]

59 Special Warning log Warning log shows the information of the past warning history of the projector. Up to 50 logs can be displayed. Log contents are as follows: Lamp-1 failure Lamp-2 failure Lamp-1 timeover Lamp-2 timeover Power failure Inside temp. A error Inside temp. B error Inside temp. C error External temp. error Power off (Power managemen[...]

60 If the WARNING TEMP indicator remains blinking after performing above checks, the cooling fans or the internal circuits may be malfunctioned. Contact the service station for check-up and repair. W ar ning T emp Indicator The WARNING TEMP indicator shows the state of the function which protects the projector. Check the state of the WARNING TEMP i[...]

61 Maintenance and Cleaning Turn off the projector, and disconnect the AC power cord from the AC outlet. 1 2 3 4 RECOMMENDATION We recommend avoiding dusty/smoky environments when operating a projector. Usage in these environments may cause poor image quality. When using under dusty or smoky conditions, dust may accumulate on liquid crystal panel, [...]

62 Maintenance and Cleaning CAUTION : DO NOT OPERATE A PROJECTOR WHILE ANY OF LAMPS IS REMOVED. IT MAY RESULT IN MALFUNCTIONS, FIRE HAZARD, OR OTHER ACCIDENTS. Lamp Replacement When the life of the projection lamps of this projector draw to an end, the LAMP 1 and 2 REPLACE indicators light orange. If one of these indicators lights orange, replace t[...]

63 Maintenance and Cleaning This projector uses a high-pressure lamp which must be handled carefully and properly. Improper handling may result in accidents, injury, or create a fire hazard. ● Lamp lifetime may differ from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for each lamp. Some lamps ma[...]

64 Maintenance and Cleaning Disconnect the AC power cord before cleaning. When the projector is not in use, replace the lens cover. 1 3 2 Follow these steps to clean the projection lens. Disconnect the AC power cord before cleaning. 1 Softly wipe the projector body with a soft, dry cleaning cloth. When it is heavily soiled, use a small amount of mi[...]

65 Maintenance and Cleaning Maintenance & Cleaning READY Green LAMP Red WARNING TEMP Red Indicat ors The projector is OFF. (The AC power cord is unplugged.) The projector is preparing for stand-by or the projection lamp is being cooled down. The projector cannot be turned on until cooling is completed. The projector is operating normally. The p[...]

66 Maintenance and Cleaning READY Green SHUTTER Blue LAMP Red Indicat ors The shutter is closed. (The projector is On.) The shutter is out of control. (The projector is in the stand-by mode.) In this case, contact the service station immediately. Pr oject or Condition Slow Fast READY Green WARNING FILTER Orange LAMP Red Indicat ors The air filter i[...]

67 Maintenance and Cleaning ✽ When the LAMP 1 REPLACE indicator and the LAMP 2 REPLACE indicator light orange, replace the projection lamps with new ones promptly. And then reset the Lamp time after replacement of the lamps. See pages 57, 62, and 63. Maintenance & Cleaning Lamp Replace Indicators READY Green LAMP 1/2 REPLACE Orange LAMP Red I[...]

68 T roubleshooting Before calling your dealer or service center for assistance, check the items below once again. – Make sure you have properly connected the projector to peripheral equipment as described on pages 22~24. – Make sure all equipment is connected to AC outlet and the power is turned on. – When you operate the projector with a co[...]

69 Appendix Some displays are not seen – Check the Display item. ( ☞ “ Setting ” on page 52) during the Operation. Only part of image is displayed. – Check if you are in D. Zoom+/ – mode. ( ☞ p. 32, 48) (Large/Small) – Change Aspect setting in the Screen setting menu. ( ☞ p. 47) – Adjust Display area and Position in the PC adjus[...]

70 Appendix Basically this projector can accept a signal from all computers with V- and H-Frequency mentioned below and less than 230 MHz of Dot Clock. –––––––– (Interlace) 1024 x 768 (Interlace) ON-SCREEN DISPLAY RESOLUTION H-Freq. (KHz) V-Freq. (Hz) VGA 1 640 x 480 31.47 59.88 VGA 2 720 x 400 31.47 70.09 VGA 3 640 x 400 31.47 70.0[...]

71 Appendix Proper image may not be obtained in some signals. Specifications are subject to change without notice. ON-SCREEN DISPLAY RESOLUTION H-Freq. (KHz) V-Freq. (Hz) D-VGA 640 x 480 31.47 59.94 D-480p 720 x 480 ( Progressive ) 31.47 59.88 D-575p 768 x 575 ( Progressive ) 31.25 50.00 D-SVGA 800 x 600 37.879 60.32 D-XGA 1024 x 768 43.363 60.00 O[...]

72 Appendix T echnical Specifications Mechanical Information Projector Type Multi-media Projector Dimensions (W x H x D) 20.39 ” x 9.92 ” x 23.86 ” (518mm x 252mm x 606mm) (Not including adjustable feet) Net Weight 54.3 lbs (24.7kg) Feet Adjustment 0 ˚ to 3.65 ˚ Panel Resolution LCD Panel System 1.4 ” TFT Active Matrix type, 3 panels Pane[...]

73 Appendix Model No. SCART-VGA Cable : 38-804753-01 Projector USB Key : 38-804791-01 Smoke Resist Box : 38-804796-01 Wired Remote Cable (30m) : 38-804792-01 Optional Interface Board Model No. Advanced Network : 38-804793-01 Dual SDI : 38-804790-01 Faroudja : 38-804728-01 DVI (HDCP compatible) : 38-804794-01 D-Sub : 38-804718-02 Warp & Blending[...]

74 Appendix System (1) Input 2 Video System (1) Input 1 RGB INPUT (2) SYSTEM SYSTEM XGA 5 Mode 1 XGA 1 XGA 3 Auto PC adj. Fine sync Total dots Current mode Clamp Position Display area Store Quit 0 - 31 V Yes/No (1) SECAM NTSC Auto PAL PAL-M PAL-N NTSC4.43 Quit H Reset System (2) Input 3 System (2) System (3) Auto Mode Menu T r ee RGB (PC Analog) RG[...]

75 Appendix Language SETTING Power management Remote control code Key lock Contrast Brightness Color Red Green Blue Sharpness Store Quit 0 - 63 0 - 63 0 - 63 0 - 63 0 - 63 0 - 63 0 - 15 Image 1 Image 2 Image 3 Image 4 Image 5 Tint 0 - 63 Gamma Noise reduction 0 - 15 Off Reset Yes/No Film Off/On Progressive Off/On Color temp. Image 6 Image 7 Image 8[...]

76 Appendix Input Signal Screen Language Lamp mode Lamp status INFORMATION Power management System Shutter management Smoke resist Option filter time Security Remote control Quit Lamp SPECIAL Quit Filter Lamp 1 Lamp 2 Option box RS – 232C Baud rate Projector ID 9600 19200 Warning log USB memory PC mode Save Delete Load W Reset Hour(s) Yes/No W Re[...]

77 Appendix 20.39 (518) 23.86 (606) Unit : inch (mm) 3.65 ˚ (Max.) 9.92 (252) 7.24 (184) 5.31 (135) Dimensions 1.08 (27.5) Appendix 18.11 (460) 13.58 (345) 18.27 (464) 9.15 (232.5) 9.15 (232.5) 14.52 (369) 2.36 (60) Screw Holes for Ceiling Mount Screws: M8 Depth: 0.31(8.0)[...]

78 Appendix T er minal Configurations Terminal: DIB 9-PIN 3 5 4 2 1 7 9 8 6 SERIAL PORT IN /OUT TERMINAL ANALOG INPUT / OUTPUT TERMINAL (ANALOG) Terminal: HDB15-PIN 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 USB CONNECTOR (Series B) ----- R X D T X D ----- GND ----- ----- ----- Serial 1 2 3 4 5 6 7 8 Red (R/Cr) Input / Output Ground (Horiz.sync.) Green (G[...]

79 Appendix Write down the PIN code number in the column below and keep it with this manual securely. If you forgot or lost the number and unable to operate the projector, contact the service station. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* *Should the four-digit number be changed, the factory set number will be invalid. P[...]

80 Appendix Numer ics 2:2 Pulldown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 2:3 Pulldown . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46 A AC plug type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .20 AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . .8, 20 Accessories . . . . . . [...]

81 Appendix Moving the Projector . . . . . . . . . . . . . . . . . . . . . . . . .7 My Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 My menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .49 N Network Manager . . . . . . . . . . . . . . . . . . . . . . . . . . .73 Noise reduction . . . . . . . . . . . .[...]

82 Appendix[...]

83 Appendix Appendix[...]

Printed in Japan Part No. 10-A 610 328 2459 (1AA6P1P5105-- KH6K) CHRISTIE DIGITAL SYSTEMS, Inc. 809 Wellington Street North Kitchener, Ontario Canada N2G 4Y7 Telephone (519) 744-8005 North America call toll-free 1-800-265-2171 (sales) Fax (519) 749-3136 CHRISTIE DIGITAL SYSTEMS, Inc. 10550 Camden Drive Cypress, CA 90630 USA Telephone (714) 236-8610[...]