Chrysler 2006 PT Cruiser Sedan manuale d’uso

T ABLE OF CONTENTS SECTION P AGE 1 INTRODUCTION ............................................................. 3 2 THINGS TO KNOW BEFORE ST AR TING YOUR VEHICLE .............................. 9 3 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE ............................. 1 1 7 4 UNDERST ANDING YOUR INSTRUMENT P ANEL ..................................[...]

[...]

INTRODUCTION CONTENTS 䡵 Introduction ........................... 4 䡵 How T o Use This Manual .................. 4 䡵 W arnings And Cautions ................... 6 䡵 V ehicle Identification Number ............... 6 䡵 V ehicle Modifications / Alterations ........... 7 1[...]

INTRODUCTION This manual has been prepar ed with the assistance of service and engineering specialists to acquaint you with the operation and maintenance of your new vehicle. It is supplemented by a W arranty Information Booklet and various customer oriented documents. Y ou are urged to read these publications car efully . Following the instruc- ti[...]

INTRODUCTION 5 1[...]

W ARNINGS AND CAUTIONS This manual contains W ARNINGS against operating procedur es which could result in an accident or bodily injury . It also contains CAUTIONS against procedures which could result in damage to your vehicle. If you do not read this entir e manual you may miss important information. Observe all W arnings and Cautions. VEHICLE IDE[...]

VEHICLE MODIFICA TIONS / AL TERA TIONS W ARNING! Any modifications or alterations to this vehicle could seriously affect its roadworthiness and safety and may lead to an accident resulting in serious injury or death. INTRODUCTION 7 1[...]

[...]

THINGS T O KNOW BEFORE ST ARTING YOUR VEHICLE CONTENTS 䡵 A W ord About Y our Keys .................. 1 3 ▫ Ignition Key Removal ................... 1 3 ▫ Locking Doors W ith The Key .............. 1 4 ▫ Key-In-Ignition Reminder ................ 1 5 䡵 Sentry Key ............................ 1 5 ▫ Replacement Keys ...................... 1[...]

▫ T o Unlock The Doors And Liftgate .......... 2 5 ▫ T o Lock The Doors And Liftgate (If Equipped W ith Power Options) .......... 2 6 ▫ Using The Panic Alarm .................. 2 6 ▫ T o T urn Off “Flash Lights W ith Lock” ........ 2 7 ▫ Programming Additional T ransmitters ........ 2 7 ▫ General Information .................... 2 9[...]

䡵 Emergency Deck Lid Release Latch (Convertible) ........................... 4 1 䡵 Power W indows ........................ 4 2 ▫ Auto Down Feature .................... 4 3 ▫ Rear W indow Switches .................. 4 4 ▫ W ind Buffeting ........................ 4 4 䡵 Occupant Restraints (Sedan) ................ 4 4 ▫ Lap/Shoulder Belt[...]

䡵 Safety T ips ........................... 1 1 4 ▫ Exhaust Gas ......................... 1 1 4 ▫ Safety Checks Y ou Should Make Inside The V e h i c l e ............................. 1 1 4 ▫ Periodic Safety Checks Y ou Should Make Outside The V ehicle ................... 1 1 5 12 THINGS TO KNOW BEFORE ST ARTING YOUR VEHICLE[...]

A WORD ABOUT YOUR KEYS The dealer that sold you your new vehicle has the key code numbers for your vehicle locks. These numbers can be used to order duplicate keys fr om your dealer . Ask your dealer for these numbers and keep them in a safe place. Ignition Key Removal Automatic T ransaxle Place the shift lever in P ARK and make sure that the shift[...]

NOTE: If you try to remove the key befor e you place the lever in P ARK, the key may become trapped temporarily in the ignition cylinder . If this occurs, rotate the key to the right slightly , then remove the key as described. If a malfunction occurs, the system will trap the key in the ignition cylinder to warn you that this safety feature is ino[...]

Key-In-Ignition Reminder Opening the driver’s door when the key is in the ignition, sounds a signal to remind you to r emove the key . NOTE: W ith the driver’s door open, and the key in the ignition, both the power door locks and Remote Keyless Entry (RKE) will not function. SENTR Y KEY The Sentry Key Immobilizer System prevents unautho- rized [...]

NOTE: • The Sentry Key Immobilizer System is not compatible with remote starting systems. Use of these systems may result in vehicle starting pr oblems and loss of security protection. • Exxon/Mobil Speed Pass,™ additional Sentry Keys, or any other transponder equipped components on the same keychain will not cause a key-related (transpon- de[...]

Sentry Key Programming Y ou can program new keys to the system if you have two valid sentry keys by performing the following procedur e: 1. Cut the additional Sentry Key T ransponder blank(s) to match the ignition switch lock cylinder key code. 2. Insert the first valid key into the ignition switch and turn the ignition switch ON for at least 3 sec[...]

STEERING WHEEL LOCK — IF EQUIPPED Y our vehicle may be equipped with a passive steering wheel lock. This lock prevents steering the vehicle with- out the ignition key . If the steering wheel is moved no more than 1/2 turn in either dir ection and the key is not in the ignition switch, the steering wheel will lock. If Y ou Wish T o Manually Lock T[...]

W ARNING! For personal security , and safety in the event of an accident, lock the vehicle doors as you drive as well as when you park and leave the vehicle. W ARNING! When leaving the vehicle always remove the key from the ignition lock, and lock your vehicle. Do not leave children unattended in the vehicle, or with access to an unlocked vehicle. [...]

Power Door Locks A door lock switch is on each front door panel. Press this switch to lock or unlock the doors. Automatic Door Locks—If Equipped The doors will lock automatically on vehicles with power door locks if all of the following conditions are met: 1. The Auto Lock feature is enabled. 2. The transmission is in gear . 3. All doors ar e clo[...]

1. Close all doors and place the key in the ignition. 2. Cycle the ignition switch between LOCK and ON and back to LOCK 4 times ending up in the LOCK position. 3. Depr ess the power door lock switch to lock the doors. 4. A single chime will indicate the completion of the programming. Auto Unlock The doors will unlock automatically on vehicles with [...]

1. The Auto Unlock feature is enabled. 2. The transmission was in gear and the vehicle speed returned to 0 mph (0 km/h). 3. The transmission is in NEUTRAL or P ARK. 4. The driver door is opened. 5. The doors wer e not previously unlocked. 6. The vehicle speed is 0 mph (0 km/h). The Auto Unlock feature can be enabled or disabled. Refer to “Persona[...]

NOTE: Use the Auto Door Locks and Auto Unlock features in accor dance with local laws. “Child-Protection” Door Lock System (Rear Doors) — If Equipped T o provide a safer envir onment for children riding in the rear seat, the r ear doors have the “child-protection” door lock system. T o use the system, open each rear door and move the cont[...]

W ARNING! A void trapping anyone in a vehicle in a collision. Remember that the rear doors can only be opened from the outside when the child protection locks are engaged. NOTE: For emergency exit with the system engaged, move the lock plunger up (unlocked position), roll down window and open the door with the outside door handle. REMOTE KEYLESS EN[...]

NOTE: The line of transmission must not be blocked with metal objects. T o unlock the doors and liftgate: Press and r elease the UNLOCK button on the key fob once to unlock only the driver’s door or twice to unlock all the doors and liftgate. When the UNLOCK button is pressed, the illuminated entry will initiate, and the parking lights will flash[...]

NOTE: Pressing the LOCK button on the keyfob while you are inside the vehicle will activate the Security Alarm. Opening a door with the Security Alarm activated will cause the alarm to sound. Press the UNLOCK button to deactivate the Security Alarm. 5. If the desir ed programming was not achieved or to reactivate this featur e, repeat the above ste[...]

The panic alarm will stay on for 3 minutes unless you turn it off by pr essing the P ANIC button a second time or if the vehicle speed is 5 mph (8 km/h) or greater . NOTE: When you turn off the panic alarm by pr essing the P ANIC button a second time, you may have to be closer to the vehicle due to the radio frequency noises of the system. T o T ur[...]

NOTE: When entering program mode using that fob, all other programmed fobs will be erased and you will have to repr ogram them for your vehicle. Use the Following procedur e to program additional key fobs if the vehicle is not equipped with Sentry Key: 1. Enter your vehicle and close all doors. 2. Fasten your seat belt (Fastening the seatbelt will [...]

14. Y our vehicle will remain in pr ogram mode up to 60 seconds from when the original chime was hear d. After 60 seconds, all programmed fobs function normally . NOTE: If you do not have a programmed transmitter , contact your dealer for details. General Information This device complies with part 15 of FCC rules and with RS-210 of Industry Canada.[...]

Battery Replacement The recommended r eplacement battery is CR2032. 1. If the key fob is equipped with a scr ew , remove the screw . W ith the transmitter buttons facing down, use a flat blade to pry the two halves of the transmitter apart. Make sure not to damage the elastomer seal during removal. 2. Remove and r eplace the batteries. A void touch[...]

REMOTE KEYLESS ENTR Y (CONVERTIBLE) This system allows you to lock or unlock the doors or open the deck lid from distances of 23–50 feet (7–15 meters) using a transmitter . Y ou don’t have to point the transmitter at the vehicle to activate the system. Each vehicle comes with two transmitters. T o Unlock the Doors Press and r elease the UNLOC[...]

The system can be programmed to unlock all the doors upon the first UNLOCK button press by using the following procedur e: 1. Pr ess and hold the LOCK button on a programmed key fob. 2. Continue to hold the LOCK button at least 4 seconds, but not longer than 10 seconds, then press and hold the UNLOCK button. A single chime will sound to indicate th[...]

The “Sound Horn On Lock” and “Flash Lamps W ith Lock” feature can be r eactivated by repeating this pr oce- dure. T o Unlatch the Deck Lid Press the “Rear Release” button twice to unlatch the deck lid. Panic Alarm The panic mode flashes the park lights, and sounds the horn for about 3 minutes or until the alarm is turned off. Using The [...]

3. T est the flash lamps with LOCK feature while outside of the vehicle, by pressing the LOCK button on the key fob with the ignition in the LOCK position, and the key removed. NOTE: Pressing the LOCK button on the key fob, while you are in the vehicle, will activate the Security Alarm. Opening a door with the Security Alarm activated will cause th[...]

General Information This transmitter complies with FCC rules part 15 and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: 1. This device may not cause harmful interfer ence. 2. This device must accept any interfer ence that may be received, including interfer ence that may cause undes- ired operation. If your R[...]

2. Remove and r eplace the batteries. A void touching the new batteries with your fingers. Skin oils may cause battery deterioration. If you touch the battery , clean it with rubbing alcohol. 3. Reassemble the transmitter case. Snap the halves together and test transmitter operation. SECURITY ALARM SYSTEM — IF EQUIPPED The system monitors the doo[...]

T o disarm the system: Unlock a front door/liftgate using the Keyless Entry T ransmitter . Starting the vehicle with a valid Sentry key will disarm the system. A valid key is one that is programmed to that particular vehicle. A valid key will disarm the system, an invalid key will trigger the alarm. T amper Alert If the horn sounds 3 times when you[...]

LIFTGA TE (SEDAN) NOTE: The key that is used to start the vehicle is also used to lock or unlock the doors and open the liftgate (if equipped). Rotate the key and pull the liftgate up. T o unlock the liftgate, insert the key into the lock and turn to the right. If equipped, the liftgate can also be unlocked using the remote keyless entry or by acti[...]

W ARNING! • Driving with the liftgate open can allow poison- ous exhaust gases into your vehicle. Y ou and your passengers could be injured by these fumes. Keep the liftgate closed when you are operating the vehicle. • If you are required to drive with the liftgate open, make sure that all windows are closed, and the climate control blower swit[...]

Gas props support the deck lid in the open position. However , because the gas pressur e drops with tempera- ture, it may be necessary to assist the pr ops when opening the deck lid in cold weather . Power Deck Lid Release Y ou can open the deck lid by pressing the Remote Keyless Entry Button or from inside the vehicle, using the switch located ins[...]

seat back can be unlatched by pulling down on the glow-in-the-dark lever attached to the left rear seat back latching mechanism. Once unlatched the seat back can be pushed forward to gain access into the interior of the vehicle. NOTE: Make sure that the elastic loop is ar ound the emergency r elease handle at all times. If the handle is pulled down[...]

As a security measure, an emer gency deck lid release lever is built into the deck lid latching mechanism. In the event of an individual being locked inside the trunk, the trunk can be simply opened by pulling on the glow-in- the-dark lever attached to the deck lid latching mecha- nism. See following picture. POWER WINDOWS The power window switches[...]

The convertible has an ⬙ All windows up ⬙ and ⬙ All windows down, ⬙ switch located between the window switches instead of the lock switch. W ARNING! Never leave children in a vehicle, with the keys in the ignition switch. Occupants, particularly unat- tended children, can become entrapped by the win- dows while operating the power window sw[...]

Rear Window Switches There ar e also rear passenger window switches (sedan only) located at the rear of the center console. Wind Buffeting W ind buffeting can be described as the perception of pressur e on the ears or a helicopter type sound in the ears. Y our vehicle may exhibit wind buffeting with the windows down, or the sunroof (if equipped) in[...]

adult-size seat belts, your seat belts or the LA TCH feature also, can be used to hold infant and child restraint systems. Please pay close attention to the information in this section. It tells you how to use your restraint system properly to keep you and your passengers as safe as possible. W ARNING! In a collision, you and your passengers can su[...]

The belt webbing retractor is designed to lock during very sudden stops or collisions. This feature allows the shoulder part of the belt to move freely with you under normal conditions. But in a collision, the belt will lock and reduce the risk of your striking the inside of the vehicle or being thrown out. W ARNING! • It is extremely dangerous t[...]

Lap/Shoulder Belt Operating Instructions 1. Enter the vehicle and close the door . Sit back and adjust the seat. 2. The seat belt latch plate is above the back of the fr ont seat, next to your arm. Grasp the latch plate and pull out the belt. Slide the latch plate up the webbing as far as necessary to allow the belt to go around your lap. 3. When t[...]

W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt that is too loose will not protect you as well. In a sudden stop you could move too far forward, increas- in[...]

4. Position the lap belt acr oss your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. W ARNING! • A lap belt worn too high can increas[...]

6. T o release the belt, push the r ed button on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically , ch[...]

W ARNING! The rear center lap/shoulder belt is equipped with a lock-out feature to ensure that the rear seat back is in the fully upright and locked position when occu- pied. If the rear seat back is not fully upright and locked and the rear center lap/shoulder belt can be pulled out of the retractor , the vehicle should imme- diately be taken to y[...]

Lap/Shoulder Belt Untwisting Procedure Use the following procedur e to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180° to create a fold that begins immediately above the latch plate. Posi[...]

3. Slide the latch plate upwar d over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. 4. Continue to slide the latch plate up until it clears the folded webbing. Seat Belt Pretensioners The seat belts for both front seating positions ar e equipped with pretensioning devices that ar e designed to remove slac[...]

Enhanced Seat Belt Reminder System (BeltAlert) If the driver’s or front passenger’s seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced W arning System (BeltAlert) will alert the driver or front passenger to buckle their seat belt. The driver should also [...]

4. T urn the ignition switch to the LOCK position. A single chime will sound to signify that you have success- fully completed the programming. The Enhanced W arning System (BeltAlert) can be reacti- vated by repeating this pr ocedure. NOTE: Although the Enhanced W arning System (BeltAlert) has been deactivated, the Seat Belt W arning Light will co[...]

NOTE: The front airbags ar e certified to the Federal regulations that allow less for ceful deployment. The front airbags have a multistage inflator design. This may allow the airbag to have differ ent rates of inflation that are based on collision severity and occupant size. Also, the front passenger airbag is certified to the Federal regulations [...]

W ARNING! • Do not put anything on or around the airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be injured because the airbags are not there to protect you. These protec- tive covers for the airbag cushions are designed to open only when the airbags are inflating. • If your vehicle is equipped with sid[...]

empty or is occupied by someone that is classified in the “child ⬙ category . This could be a child, a teenager , or even a small adult. Here ar e some simple steps you can take to minimize the risk of harm from a deploying airbag. 1. Children 12 years old and under should always ride buckled up in a rear seat. Infants in rear facing child r es[...]

5. If the airbag system in this vehicle needs to be modified to accomodate a disabled person, contact the Customer Center . Phone numbers are pr ovided under ⬙ If Y ou Need Assistance ⬙ in Section 9 of this manual. W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt [...]

The front airbag system consists of the following: • Occupant Restraint Controller • Side Remote Acceleration Sensors (If equipped) • Airbag W arning Light • Driver Airbag • Passenger Airbag • Front Seat Mounted Side Airbags (If equipped) • Steering Wheel and Column • Instrument Panel • Interconnecting W iring • Knee Impact Bols[...]

The ORC also monitors the readiness of the electr onic parts of the system whenever the ignition switch is in the ST AR T or RUN positions. These include all of the items listed above except the steering wheel and column, and knee bolsters. If the key is in the OFF position, in the ACC position, or not in the ignition, the airbags are not on and wi[...]

• The OCS classifies an occupant using weight sensors mounted in the base of the front passenger seat. Any weight on the seat will be sensed by the system. Objects hanging on the seat or other passengers push- ing down on the seat will also be sensed. The weight of an adult will cause the system to turn the airbag on. In this case, the OCS has cl[...]

front passenger seat. In this case, the air bag is r eady to be inflated if a collision requiring an airbag occurs. For all other occupants, the P AD indicator light will be illuminated indicating that the front passenger airbag is turned off and will not inflate. NOTE: Even though this vehicle is equipped with an occupant classification system, ch[...]

or instrument panel), the weight sensors in the seat may not properly classify the occupant. Objects lodged under the seat or between the seat and the center console can prevent the occupant’s weight fr om being measured properly and may r esult in the occupant being improp- erly classified. Ensure that the fr ont passenger seat back does not tou[...]

may be possible based on collision severity and occu- pant size. The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the bags inflate to their full size. The bags fully inflate in about 50 - 70 milliseconds. This is about half of the time it takes to blink your eyes. The bags then q[...]

The ORC Module monitors the readiness of the electr onic parts of the system whenever the ignition switch is in the ST AR T or ON positions. These include all of the items previously mentioned. In moderate to severe side collisions, the side airbag inflator on the crash side of the vehicle is triggered, releasing a quantity of nontoxic gas. The inf[...]

The following requir ements must be strictly adhered to: • Do not modify the front passenger seat assembly or components in any way . • Do not modify the front seat center console or center position seat in any way . • Do not use prior or future model year seat covers not designated for the specific model being repair ed. Al- ways use the cor[...]

If A Deployment Occurs The airbag systems are designed to deploy when the airbag control modules detect a moderate-to-sever e col- lision, to help restrain the driver and fr ont passenger , and then immediately deflate. NOTE: A frontal collision that is not severe enough to need airbag protection will not activate the system. This does not mean som[...]

W ARNING! Deployed airbags and seat belt pretensioners cannot protect you in another collision. Have the airbags, seat belt pretensioners, and the front passenger seat belt retractor assembly , replaced by an authorized dealer as soon as possible. Also, have the Occupant Classification System serviced as well. Maintaining Y our Airbag System W ARNI[...]

Airbag Light Y ou will want to have the airbags ready to inflate for your protection in a collision. While the airbag system is designed to be maintenance free, if any of the following occurs, have an authorized dealer service the system immediately . • The AIRBAG light does not come on during the 6 to 8 seconds when the ignition switch is first [...]

identify particular vehicles or crashes may be released for incorporation in aggregate crash databases, such as those maintained by the US government and various states. Data of a potentially sensitive nature, such as would identify a particular driver , vehicle, or crash, will be treated confidentially . Confidential data will not be dis- closed b[...]

Child Restraint Everyone in your vehicle needs to be buckled up at all times — babies and children, too. Every state in the United States and all Canadian provinces r equire that small children ride in pr oper restraint systems. This is the law , and you can be prosecuted for ignoring it. Children 12 years and under should ride pr operly buck- le[...]

• Safety experts recommend that childr en ride rearwar d-facing in the vehicle until they are at least one year old and weigh at least 20 lbs (9 kg). T wo types of child restraints can be used r earward-facing: infant carriers and ⬙ convertible ⬙ child seats. Both types of child restraints ar e held in the vehicle by the lap/ shoulder belt or[...]

are held in the vehicle by the lap/shoulder belt. (Some booster seats are equipped with a fr ont shield and are held in the vehicle by the lap portion.) NOTE: For additional information refer to www .nhtsa.dot.gov or www .seatcheck.org. W ARNING! • Improper installation can lead to failure of an infant or child restraint. It could come loose in a[...]

restraint so that it is not necessary to use a locking clip. If the seat belt has a cinching latch plate, pulling up on the shoulder portion of the lap/shoulder belt will tighten the belt. The cinching latch plate will keep the belt tight, however , any seat belt system will loosen with time, so check the belt occasionally and pull it tight if nece[...]

from the r etractor . Allow the belt to return into the retractor , pulling on the excess webbing to tighten the lap portion about the child restraint. Follow the instr uctions of the child restraint manufactur e. NOTE: T o reset this featur e you must let all of the belt webbing return into the r etractor . Y ou will not be able to pull out more w[...]

Child restraints systems having attachments designed to connect to the lower anchorages are now available. Child restraints having tether straps and hooks for connection to the top tether anchorage have been available for some time. In fact, many child restraint manufactur ers will provide add-on tether strap kits for some of their older products. [...]

restraint installation, instead of tucking the seat belt behind the child restraint, r oute the seat belt through the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child. Remind all children in the vehicle that the seat belts ar e not toys and should not be played with, and never lea[...]

Not all child restraint systems will be installed as we have described here. Again, carefully follow the instruc- tions that come with the child restraint system. NOTE: If your child restraint seat is not LA TCH com- patible, install the restraint using the vehicle seat belts. W ARNING! An incorrectly anchored tether strap could lead to increased h[...]

Pets should be restrained in the r ear seat in pet harnesses or pet carriers that are secur ed by seat belts. OCCUP ANT RESTRAINTS (CONVERTIBLE) Some of the most important safety features in your vehicle are the r estraint systems. These include the front and rear seat belts for the driver and all passengers, fr ont airbags for both the driver and [...]

ejection and the risk of injury caused by striking the inside of the vehicle. Everyone in a motor vehicle should be belted at all times. Lap/Shoulder Belts All the seats in your vehicle are equipped with Lap/ Shoulder Belts. If the belt webbing is twisted, and comes in contact with the wearers body , the twisted belt should be corrected using the L[...]

W ARNING! • W earing a seat belt incorrectly is dangerous. Seat belts are designed to go around the large bones of your body . These are the strongest parts of your body and can take the forces of a collision the best. • W earing your belt in the wrong place could make your injuries in a collision much worse. Y ou might suffer internal injuries[...]

3. When the belt is long enough to fit, insert the latch plate into the buckle until you hear a “click.” W ARNING! • A belt that is buckled into the wrong buckle will not protect you properly . The lap portion could ride too high on your body , possibly causing internal injuries. Always buckle your belt into the buckle nearest you. • A belt[...]

4. Position the lap belt acr oss your thighs, below your abdomen. T o remove slack in the lap belt portion, pull up on the shoulder belt. T o loosen the lap belt if it is too tight, tilt the latch plate and pull on the lap belt. A snug belt reduces the risk of sliding under the belt in a collision. W ARNING! • A lap belt worn too high can increas[...]

6. T o release the belt, push the r ed button on the buckle. The belt will automatically retract to its stowed position. If necessary , slide the latch plate down the webbing to allow the belt to retract fully . W ARNING! A frayed or torn belt could rip apart in a collision and leave you with no protection. Inspect the belt system periodically , ch[...]

Lap/Shoulder Belt Untwisting Procedure Use the following procedur e to untwist a twisted lap/ shoulder belt. 1. Position the latch plate as close as possible to the anchor point. 2. At about 6 to 12 inches (15 to 30 cm) above the latch plate, grasp and twist the belt webbing 180° to create a fold that begins immediately above the latch plate. Posi[...]

3. Slide the latch plate upwar d over the folded webbing. The folded webbing must enter the slot at the top of the latch plate. 4. Continue to slide the latch plate up until it clears the folded webbing. Seat Belt Pretensioners The seat belts for both front seating positions ar e equipped with pretensioning devices that ar e designed to remove slac[...]

Enhanced Seat Belt Reminder System (BeltAlert) If the driver’s or front passenger’s seat belt has not been buckled within 60 seconds of starting the vehicle and if the vehicle speed is greater than 5 mph (8 km/h), the Enhanced W arning System (BeltAlert) will alert the driver or front passenger to buckle their seat belt. The driver should also [...]

4. T urn the ignition switch to the LOCK position. A single chime will sound to signify that you have success- fully completed the programming. The Enhanced W arning System (BeltAlert) can be reacti- vated by repeating this pr ocedure. NOTE: Although the Enhanced W arning System (BeltAlert) has been deactivated, the Seat Belt W arning Light will co[...]

NOTE: The front airbags ar e certified to the Federal regulations that allow less for ceful deployment. The front airbags have a multistage inflator design. This may allow the airbag to have differ ent rates of inflation that are based on collision severity and occupant size. Also, the front passenger airbag is certified to the Federal regulations [...]

W ARNING! • Do not put anything on or around the airbag covers or attempt to manually open them. Y ou may damage the airbags and you could be injured because the airbags are not there to protect you. These protec- tive covers for the airbag cushions are designed to open only when the airbags are inflating. • If your vehicle is equipped with sid[...]

empty or is occupied by someone that is classified in the “child” category . This could be a child, a teenager , or even a small adult. Here ar e some simple steps you can take to minimize the risk of harm from a deploying airbag. 1. Children 12 years old and under should always ride buckled up in a rear seat. Infants in rear facing child r est[...]

5. If the airbag system in this vehicle needs to be modified to accomodate a disabled person, contact the Customer Center . Phone numbers are provided under ⴖ If Y ou Need Assistance ⴖ in Section 9 of this manual. W ARNING! • Relying on the airbags alone could lead to more severe injuries in a collision. The airbags work with your seat belt t[...]

The front airbag system consists of the following: • Occupant Restraint Controller • Side Remote Acceleration Sensors (If Equipped) • Airbag W arning Light • Driver Airbag • Passenger Airbag • Front Seat Mounted Side Airbags (If equipped) • Steering Wheel and Column • Instrument Panel • Interconnecting W iring • Knee Impact Bols[...]

The ORC also monitors the readiness of the electr onic parts of the system whenever the ignition switch is in the ST AR T or RUN positions. These include all of the items listed above except the steering wheel and column, and knee bolsters. If the key is in the OFF position, in the ACC position, or not in the ignition, the airbags are not on and wi[...]

• The OCS classifies an occupant using weight sensors mounted in the base of the front passenger seat. Any weight on the seat will be sensed by the system. Objects hanging on the seat or other passengers push- ing down on the seat will also be sensed. The weight of an adult will cause the system to turn the airbag on. In this case, the OCS has cl[...]

child restraint or booster seats, most childr en that can properly wear the vehicle’s seat belt, and when an adult passenger is properly seated in the fr ont passen- ger seat. In this case, the air bag is ready to be inflated if a collision requiring an airbag occurs. For all other occupants, the P AD indicator light will be illuminated indicatin[...]

or instrument panel), the weight sensors in the seat may not properly classify the occupant. Objects lodged under the seat or between the seat and the center console can prevent the occupant’s weight fr om being measured properly and may r esult in the occupant being improp- erly classified. Ensure that the fr ont passenger seat back does not tou[...]

may be possible based on collision severity and occu- pant size. The steering wheel hub trim cover and the upper right side of the instrument panel separate and fold out of the way as the bags inflate to their full size. The bags fully inflate in about 50 - 70 milliseconds. This is about half of the time it takes to blink your eyes. The bags then q[...]

In moderate to severe side collisions, the side airbag inflator on the crash side of the vehicle is triggered, releasing a quantity of nontoxic gas. The inflating side airbag exits through the seat seam into the space between the occupant and the door . The side airbag moves at a very high speed and with such a high force, that it could injure you [...]

• Do not modify the front seat center console or center position seat in any way . • Do not use prior or future model year seat covers not designated for the specific model being repair ed. Al- ways use the correct seat cover specified for the vehicle. • Do not replace the seat cover with an aftermarket seat cover . • Do not add a secondary[...]

NOTE: A frontal collision that is not sever e enough to need airbag protection will not activate the system. This does not mean something is wrong with the airbag system. If you do have a collision which deploys the airbags, any or all of the following may occur: • The nylon airbag material may sometimes cause abra- sions and/or skin reddening to[...]

Maintaining Y our Airbag System W ARNING! • Modifications to any part of the airbag system could cause it to fail when you need it. Y ou could be injured if the airbag system is not there to protect you. Do not modify the components or wiring, including adding any kind of badges or stickers to the steering wheel hub trim cover or the upper right [...]

data gathered during a complete accident investigation, the electronic data may be used by DaimlerChrysler and others to learn more about the possible causes of crashes and associated injuries in order to assess and impr ove vehicle performance. In addition to crash investigations initiated by DaimlerChrysler , such investigations may be requested [...]

• Diagnostic trouble code(s) and warning lamp status for electronically-contr olled safety systems, including the airbag system • Airbag disable lamp status (if equipped) • ⬙ Ti m e ⬙ of airbag deployment (in terms of ignition cycles and vehicle mileage) • Airbag deployment level (if applicable) • Seatbelt status • Brake status (ser[...]

W ARNING! In a collision, an unrestrained child, even a tiny baby , can become a missile inside the vehicle. The force required to hold even an infant on your lap could become so great that you could not hold the child, no matter how strong you are. The child and others could be badly injured. Any child riding in your vehicle should be in a proper [...]

• Rearward-facing child seats must NEVER be used in the front seat of a vehicle with a fr ont passenger airbag. An airbag deployment could cause severe injury or death to infants in this position. • Children who weigh mor e than 20 lbs (9 kg) and who are older than one year can ride forwar d-facing in the vehicle. Forward-facing child seats and[...]

Here are some tips on getting the most out of your child restraint: • Before buying any r estraint system, make sure that it has a label certifying that it meets all applicable Safety Standards. W e also recommend that you make sure that you can install the child restraint in the vehicle where you will use it, befor e you buy it. • The restrain[...]

belt several times to shorten it. Insert the latch plate into the buckle with the release button facing out. • If the belt still can’t be tightened, or if by pulling and pushing on the restraint loosens the belt, disconnect the latch plate from the buckle, turn the latch plate around, and insert the latch plate into the buckle again. If you sti[...]

Child restraints systems having attachments designed to connect to the lower anchorages are now available. Child restraints having tether straps and hooks for connection to the top tether anchorage have been available for some time. In fact, many child restraint manufactur ers will provide add-on tether strap kits for some of their older products. [...]

restraint installation, instead of tucking the seat belt behind the child restraint, r oute the seat belt through the child restraint belt path and then buckle it. This should stow the seat belt out of the reach of an inquisitive child. Remind all children in the vehicle that the seat belts ar e not toys and should not be played with, and never lea[...]

Not all child restraint systems will be installed as we have described here. Again, carefully follow the instruc- tions that come with the child restraint system. NOTE: If your child restraint seat is not LA TCH com- patible, install the restraint using the vehicle seat belts. W ARNING! An incorrectly anchored tether strap could lead to increased h[...]

• Check belt fit periodically . A child’s squirming or slouching can move the belt out of position. • If the shoulder belt contacts the face or neck, move the child closer to the center of the vehicle. Never allow a child to put the shoulder belt under an arm or behind their back. T ransporting Pets Airbags deploying in the front seat could h[...]

A new engine may consume some oil during its first few thousand miles (kilometers) of operation. This should be considered as a normal part of the br eak-in and not interpreted as an indication of dif ficulty . SAFETY TIPS Exhaust Gas W ARNING! Exhaust gases can injure or kill. They contain carbon monoxide (CO) which is colorless and odorless. Brea[...]

Front seat belt assemblies must be r eplaced after a collision. Rear seat belt assemblies must be replaced after a collision if they have been damaged (bent retractor , torn webbing, etc. If there is any question r egarding belt or retractor condition, r eplace the belt. Airbag Light The light should come on and remain on for 6 to 8 seconds as a bu[...]

[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE CONTENTS 䡵 Convertible T op Operation ................ 1 2 1 ▫ T o Lower The T op ..................... 1 2 1 ▫ T o R a i s e T h e T o p ..................... 1 2 4 ▫ Convertible T op Boot Cover Installation–If Equipped ........................... 1 2 6 ▫ Convertible T op Boot Cover Removal [...]

▫ UConnect™ System Features ............. 1 4 7 ▫ Advanced Phone Connectivity ............ 1 5 2 ▫ Things Y ou Should Know About Y our UConnect™ System .................... 1 5 4 䡵 Seats ................................ 1 5 9 ▫ Front Seat Adjustment .................. 1 5 9 ▫ Power Seat Adjuster — If Equipped ........ 1 6 0 ▫ Ma[...]

▫ Daytime Running Lights (DRL)(Canada Only) . 182 ▫ Lights-On Reminder ................... 1 8 2 ▫ Fog Lights — If Equipped ............... 1 8 3 ▫ T urn Signals ......................... 1 8 3 ▫ Highbeam/Lowbeam Select Switch ......... 1 8 3 ▫ Passing Light ........................ 1 8 3 䡵 W indshield W ipers And W ashers .........[...]

▫ Canadian Pr ogramming/Gate Programming . . 197 ▫ Operation ........................... 1 9 8 ▫ Reprogramming A Single Button .......... 1 9 8 ▫ Security ............................ 1 9 8 䡵 Power Sunroof — If Equipped ............. 1 9 9 ▫ Express Open Featur e .................. 2 0 0 ▫ W ind Buffeting ....................... 2 0[...]

CONVERTIBLE TOP OPERA TION W ARNING! The convertible top does not provide the structural protection that a reinforced metal roof does, and the fabric top cannot be expected to prevent the ejection of the occupants of a vehicle in a collision. Therefore it is important that all occupants wear their seat belts at all times when riding in a convertibl[...]

CAUTION! T o fully insure that no damage occurs, be sure that the vehicle is at a complete stop with the gear selector in the Park position (automatic transaxle) or in the Neutral position (manual transaxle) before lowering or raising the top. CAUTION! Do not operate the convertible top with ice or snow build-up on the top. Damage to the top may oc[...]

3. Press the Power T op Switch to lower the top just enough to disengage the top pins from the header , turn the handle counterclockwise and raise the handle to the stowed position. NOTE: The Power T op Switch has two detent positions for lowering the convertible top. Pressing and holding the Power T op Switch lightly in the first detent position w[...]

4. Continue pressing the Power T op Switch until the convertible top is lowered completely . 5. Install the Convertible T op Boot Cover , if equipped. Refer to Convertible T op Boot Cover Installation–If Equipped, in this section. CAUTION! Damage to the convertible top boot cover could result if the latch handle is not completely closed when the [...]

1. Remove the convertible top boot cover , if equipped. Refer to Convertible T op Boot Cover Removal and Stor- age, in this section. 2. T urn the ignition to the ON position. 3. Press the Power T op Switch to raise the top. Before the top reaches the windshield, open the latch handle and turn the handle clockwise to open the latches. Press the swit[...]

CAUTION! Car top carriers, ski racks, etc., should not be at- tached to the convertible top mechanism as they will damage the top. Do not place objects on the convert- ible top, in the top well or on the sport bar . Damage to the convertible top may occur . Convertible T op Boot Cover Installation–If Equipped 1. W ith the top down and the convert[...]

2. Install the rear edge of the boot, first tucking the rear edge of the boot under the rear and both sides of the rails. Boot Laying Across Convertible T op UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 127 3[...]

3. Pull the right and left boot arms forward and engage both boot arm snaps. Make sure both snaps ar e fully engaged. T ucking Boot Under Rail Engaging Boot Arm Snaps 128 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

4. Engage the boot center section retainer using the tabs provided. 5. T uck the rear flap of the boot in behind the Upper Moulding. Engaging Boot Center Section T ucking In Rear Flap UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 129 3[...]

Convertible T op Boot Cover Removal and Storage 1. Unsnap the snaps and remove the top cover boot. 2. Lay the boot cover flat with the center section retainer facing the rear of the car . Boot Removed And Laying Flat 130 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

3. First fold the left side of the boot cover to the middle of the boot cover . 4. Second fold the right side of the boot cover to the middle, fitting it inside the left side of the boot cover and store it in the tr unk or a dry secure area. CAUTION! Do not lay heavy objects on top of the boot or lay the boot on top of sharp/pointy objects. Damage [...]

CONVERTIBLE TOP MANUAL OVERRIDE If your vehicle is experiencing electrical failure (low battery , etc.) and it is necessary to raise the convertible top, perform the following steps: 1. Locate the convertible top motor bypass screw , which is found in the trunk under the convertible top storage area. 2. T urn the screw counterclockwise until the sc[...]

3. Using the latch handle raise the top until the two pins seat themselves in the windshield header . 4. Rotate the latch handle clockwise to open the latches. 5. Pull down and rotate the handle counterclockwise to engage the latches. 6. Raise the handle into the stowed position. 7. Close the convertible top motor bypass screw by turning the screw [...]

Annoying headlight glare can be r educed by moving the small control under the mirr or to the night position (toward r ear of vehicle). The mirror should be adjusted while set in the day position (toward windshield). Outside Mirror—Driver’s Side Adjust the outside mirror to center on the adjacent lane of traffic, with a slight overlap of the vi[...]

Electric Remote-Control Mirrors — If Equipped The power mirror switch is located to the left of the steering column on the instrument panel. T o adjust the view in the outside mirrors, turn the r otary knob to the left (L), center (O) or Right (R) position. After selecting the mirror , move the knob in the same direction you want the mirror to mo[...]

An illuminated vanity mirror is on the sun visor . T o use the mirror , rotate the sun visor down and swing the mirror cover upwar d. The lights turn on automatically . Closing the mirror cover turns of f the lights. Sun Visor Sliding Feature The sun visors may be pulled out to provide extended coverage of the side glass. HANDS–FREE COMMUNICA TIO[...]

UConnect™ allows you to transfer calls between the system and your cellular phone as you enter or exit your vehicle, and enables you to mute the system’s micro- phone for private conversation. The UConnect™ phonebook enables you to store up to 32 names and four numbers per name. Each language has a separate 32 name phonebook accessible only i[...]

The UConnect™ system can be used with any Hands- Free Pr ofile certified Bluetooth™ cellular phone. See www .chrysler .com/uconnect for supported phones. If your cellular phone supports a differ ent profile (e.g., Headset Profile), you may not be able to use any UCon- nect™ features. Refer to your cellular service pr ovider or the phone manuf[...]

example, you can either use the combined form voice command ⬙ Phonebook New Entry , ⬙ or you can break the combined form command into two voice com- mands: ⬙ Phonebook ⬙ and ⬙ New Entry . ⬙ Please remem- ber , the UConnect™ system works best when you talk in a normal conversational tone, as if speaking to some one sitting eight feet a[...]

NOTE: • www .chrysler .com/uconnect • www .dodge.com/uconnect • www .jeep.com/uconnect The following are general phone to UConnect™ System pairing instructions: • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Phone Pairing. ⬙ • When prompted, after the voice on beep, sa[...]

phones are pr esent in the vehicle, the UConnect™ system will use the priority 3 cellular phone when you make a call. Y ou can select to use a lower priority cellular phone at any time (refer to ⬙ Advanced Phone Connectivity ⬙ ). Dial by Saying a Number • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the foll[...]

you can say ⬙ John Doe, ⬙ where John Doe is a pr evi- ously stored name entry in the UConnect™ phone- book. Refer to ⬙ Add Names to Y our UConnect™ Phonebook, ⬙ to learn how to store a name in the phonebook. • The UConnect™ system will confirm the name and then dial the corresponding phone number , which may appear in the display of[...]

four associated phone numbers and designations. Each language has a separate 32 name phonebook accessible only in that language. Edit Entries in the UConnect™ Phonebook NOTE: Editing phonebook entries is recommended when vehicle is not in motion. • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep,[...]

• After you enter the Phonebook Delete menu, you will then be asked for the name of the entry that you wish to delete. Y ou can either say the name of a phonebook entry that you wish to delete or you can say ⬙ List Names ⬙ to hear a list of the entries in the phonebook from which you choose. T o select one of the entries from the list, pr ess[...]

• T o call one of the names in the list, press the ⬙ V oice Recognition’ button during the playing of the desired name and say ⬙ Call. ⬙ NOTE: the user can also exercise ⬙ Edit ⬙ or ⬙ Delete ⬙ operations at this point. • The UConnect™ system will then prompt you as to number designation you wish to call. • The selected numbe[...]

Making a Second Call while Current Call in Progress T o make a second call while you are curr ently in a call, press the ’V oice Recognition’ button and say ⬙ Dial ⬙ or ⬙ Call ⬙ followed by the phone number or phonebook entry you wish to call. The first call will be on hold while the second call is in progr ess. T o go back to the first[...]

Call T ermination T o end a call in progr ess, momentarily press the ⬘ Phone’ button. Only the active call(s) will be terminated and if there is a call on hold, it will become the new active call. Redial • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Redial. ⬙ • The UConnect™ [...]

• After the ⬙ Ready ⬙ prompt and the following beep, say the name of the language you wish to switch to (English, Espanol, or Francais, if so equipped). • Continue to follow the system prompts to complete language selection. After selecting one of the languages, all prompts and voice commands will be in that language. NOTE: After every UCon[...]

emergency situations when the cell phone has network coverage and stays paired to the UConnect™ system. T owing Assistance If you need towing assistance, • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ T owing Assistance. ⬙ NOTE: The T owing Assistance number dialed is based on the C[...]

When calling a number with your UConnect™ system that normally requir es you to enter in a touch-tone sequence on your cellular phone keypad, you can push the ’V oice Recognition’ button and say the sequence you wish to enter followed by the word ⬙ Send. ⬙ For example, if requir ed to enter your pin number followed with a poun d3746# ,y o[...]

Dialing Using the Cellular Phone Keypad Y ou can dial a phone number with your cellular phone keypad and still use the UConnect™ system (while dialing via the cell phone keypad, the user must exercise caution and take precautionary safety measur es). By dialing a number with your paired Bluetooth™ cellular phone, the audio will be played throug[...]

Information Service When using A T&T W ireless Service, dialing to phone number ⬙ #121, ⬙ you can access voice activated automated system to receive news, weather , stocks, traffic, etc. related information. Advanced Phone Connectivity T ransfer Call to and from Cellular Phone The UConnect™ system allows on going calls to be transferred t[...]

Select another Cellular Phone This feature allows you to select and start using another phone with the UConnect™ system. The phone must have been previously pair ed to the UConnect™ system that you want to use it with. • Press the ’Phone’ button to begin. • After the ⬙ Ready ⬙ prompt and the following beep, say ⬙ Setup Select Phon[...]

⬘ V oice Recognition’ button anytime while the list is being played and say the priority number of the phone you wish to delete. Things Y ou Should Know About Y our UConnect™ System V oice Recognition (VR) • Always wait for the beep before speaking. • Speak normally , without pausing, just as you would speak to a person sitting approximat[...]

• UConnect™ phonebook name tag recognition rate is optimized for the voice of the person who stored the name in the phonebook. • Y ou can say ⬙ O ⬙ (letter ⬙ O ⬙ ) for ⬙ 0 ⬙ (zero). ⬙ 800 ⬙ must be spoken ⬙ eight-zero-zer o. ⬙ • Even though international dialing for most number combinations is supported, some shortcut di[...]

156 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

UNDERST ANDING THE FEA TURES OF YOUR VEHICLE 157 3[...]

158 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

North American English Primary Alternate(s) Zero Oh Add location Add new All All of them Confirmation prompts Confirmations prompts Delete a name Delete Language Select language List names List all List paired phones List phones Pager Beeper Phone pairing Pairing Phonebook Phone book Return to main menu Return. Main menu Select phone select Set up [...]

Using body pressur e, move forward and r earward on the seat to be sure the seat adjusters have latched. W ARNING! • Adjusting a seat while the vehicle is moving is dangerous. The sudden movement of the seat could cause you to lose control. The seat belt might not be properly adjusted and you could be injured. Adjust the seat only while the vehic[...]

This seat also has a manual recline lever located just to the rear of the power seat switch. T o recline, lean forward slightly before lifting the lever , then lean back to the desired position and r elease the lever . Lean forward and lift the lever to return the seatback to its normal position. Power Seat Switch Recliner Control Lever UNDERST AND[...]

Manual Lumbar—If Equipped The Lumbar adjustment is located on the inboard side of the driver’s seat. T o increase support, r otate the handle down. Folding Front Passenger Seat — If Equipped The passenger front seat may be folded fully forwar d to provide additional car go space. T o fold the seat forward pull up on the r ecliner lever locate[...]

Driver’s Seat Back Tilt—If Equipped How to operate the driver’s seat: 1. Push the lever down until seat back releases. 2. Push the seat back forward. 3. T o return seat to a sitting position, push seat back rearwar d. NOTE: The driver’s front seat has a full r ecliner memory , which will allow the seat back to return to its original positio[...]

2. Push seat back forward until it slides toward the dashboard. 3. T o return seat to a sitting position, rotate seat back upright until it locks. 4. Push seat rearward until the track locks. NOTE: The passenger front seat has a full r ecliner memory , which will allow the seat back to returned to its original position. NOTE: The passenger front se[...]

Heated Seats — If Equipped This feature heats the fr ont driver’s and passenger’s seats. The control for the heater is located on the instr u- ment panel, below the radio. After turning on the igni- tion, you may choose OFF , HIGH, or LOW heat settings. An indicator on the switch shows which setting has been chosen. Adjustable Head Restraints[...]

Pressing the switch once will select high-level heating. Pressing the switch a second time will select low-level heating. Pressing the switch a thir d time will shut the heating elements off. When high-temperature heating is selected, the heaters provide a boosted heat level during the first four minutes of operation after heating is activated. The[...]

W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts • Be sure that everyone in your vehicle is in a [...]

Folding Rear Seat (Convertible) T o provide additional storage ar ea, each rear seatback can be folded forward. The seat back r elease knobs are located in the trunk ar ea. Pull the left side seatback release knob to fold down the left side seatback. Pull the right side seatback release knob to fold down the right side seatback. Folding Rear Seat R[...]

W ARNING! • It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a collision, people riding in these areas are more likely to be seriously injured or killed. • Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. • Be sure that everyone in your vehicle is in a[...]

• Push and hold the button on the seatback and fold down the rear seatback. • Pull the release handle located on the outboar d side of the seat. Lift up the seat and tumble the seat forward. • Attach the elastic strap, located at the base of the seat cushion, onto the hook bar on the center trim panel to hold the seat in place. Folding Rear S[...]

T o return the r ear seat to it’s upright latched position, rotate the seat cushion r earward to latch the seat. Then lift the seatback to its upright latched position. NOTE: The elastic strap should be reinstalled in the clip on the base of the seat cushion before r eturning the seat to its normal position. T umbling Rear Seat (Convertible) T o [...]

the left side seatback. Pull the right side seatback release knob to fold down the right side seatback. 2. From inside the vehicle, fold the rear seat back down flat. Folding Rear Seat Release Knobs Folding Rear Seat Back 172 UNDERST ANDING THE FEA TURES OF YOUR VEHICLE[...]

3. Pull the release handle located at the bottom of the folded seat back and tumble the seat forward. 4. Attach the cinching tether strap, located at the side of the seat cushion, onto the hook bar on the center trim panel and tighten by pulling the cinching strap until the seat is secure. T umbling Rear Seat Cinching T ether Strap UNDERST ANDING T[...]

T o return the tumbling r ear seat to the latched (normal) position use the following procedur e: 1. Loosen the strap by pushing rearward on the cinching tether strap buckle. 2. Disconnect the cinching tether strap. NOTE: The strap should be reinstalled in the side pocket on the seat cushion before r eturning the seat to the latched (normal) positi[...]

NOTE: Prior to lifting either seatback to the upright position, be sure that the seat belt is br ought forward to avoid trapping it behind the seatback. 3. Rotate the seat cushion r earward to latch the seat. Then lift the seatback to its upright latched position. W ARNING! In an accident, you or others in your vehicle could be injured if seats are[...]

• Pull the release lever located on the outboar d side of the seat. Lift up the seat and tumble the seat forward. • Lift up the release levers to disengage the seat fr om the floor attachments. • Using the handle on the seat, the seat assembly can now be lifted and removed fr om the vehicle. NOTE: Small rollers on the bottom of the folded sea[...]

T o reinstall the r ear seat, insert the seat into the floor attachments. Lower the release levers of the seat to latch the front floor attachments and r otate the seat rearwar d to latch the seat. Lift the seat back to its upright latched position. W ARNING! In an accident, you or others in your vehicle could be injured if seats are not properly l[...]

Then move the safety catch located under the front edge of the hood, near the center and slightly to the right, and raise the hood. Use the hood prop r od clipped to the driver’s side of the engine compartment to secure the hood in the open position. Place the hood prop at the location stamped into the inner hood surface. T o prevent possible dam[...]

NOTE: The lights will remain on until the switch is pressed a second time, so be sur e they have been turned off befor e leaving the vehicle. They will not turn off automatically . Map/Reading Lights (Convertible) When the ignition switch is in the ON position, these lights, located under the rearview mirr or can be turned on by switches located at[...]

NOTE: The lights will remain on until the switch is pressed a second time, so be sur e they have been turned off befor e leaving the vehicle. They will not turn off automatically . Interior Lights The interior lights come on when a door or deck lid (convertible) is opened. W ith the ignition key in the OFF position, the interior lights will automat[...]

control is left in the Dome light position or a door is left open. The interior lights will remain on for only 90 seconds for all occurrence after that, until the engine is turned on and off. Interior light Defeat (OFF) Rotate the dimmer control to the ex- treme bottom “OFF” position. The in- terior lights will remain of f when the doors are op[...]

Headlights, Parking Lights, Instrument Panel Lights T urn the end of the Multi-Function Control Lever to the first detent for parking light operation. T urn to the second detent for headlight operation. T o change the brightness of the instrument panel lights, rotate the center portion of the Multi-Function Contr ol Lever up or down. Daytime Runnin[...]

Fog Lights — If Equipped The front fog light switch is on the Multi-Function Control Lever . T o activate the front fog lights, turn on the parking lights or the low beam headlights and pull out the end of the control lever . NOTE: The fog lights will only operate with the head- lights on low beam. Selecting high beam headlights will turn off the[...]

WINDSHIELD WIPERS AND W ASHERS The wipers and washers are operated by a switch on the control lever . The lever is located on the right side of the steering column. Rotate the control to select the desir ed wiper speed. Windshield W ashers T o use the washer , pull the control lever towar d you and hold while spray is desired. If the lever is pulle[...]

CAUTION! In cold weather , always turn off the wiper switch and allow the wipers to return to the park position before turning off the engine. If the wiper switch is left on and the wipers freeze to the windshield, damage to the wiper motor may occur when the vehicle is restarted. Windshield Wiper Operation Rotate the control to the second detent f[...]

NOTE: If the front wiper is operating when the ignition is turned off, the wiper will automatically r eturn to the ⬙ Park ⬙ position. When the vehicle is restarted, the wipers will resume operation. Rear Window Wiper/W asher (Sedan Models Only) A switch on the right side of the steering column controls operation of the rear wiper/washer functio[...]

Adding W asher Fluid The fluid reservoir for the windshield washers and the rear window washer (If Equipped) is shar ed. It is located in the front of the engine compartment on the passenger side and should be checked for fluid level at regular intervals. Fill the reservoir with windshield washer sol- vent (not radiator antifreeze) and operate the [...]

W ARNING! T ilting the steering column while the vehicle is moving is dangerous. W ithout a stable steering col- umn, you could lose control of the vehicle and have an accident. Adjust the column only while the ve- hicle is stopped. Be sure it is locked before driving. TRACTION CONTROL SWITCH — IF EQUIPPED The traction control indicator , located[...]

NOTE: The T raction Control System will make buzzing or clicking sounds when the system is in operation. ELECTRONIC SPEED CONTROL — IF EQUIPPED When engaged, this device takes over the accelerator operation at speeds greater than 35 mph (56 km/h). The speed control lever is located on the right side of the steering wheel. T o Activate: Push the O[...]

W ARNING! Leaving the Electronic Speed Control system on when not in use is dangerous. Y ou could accidentally set the system or cause it to go faster than you want. Y ou could lose control and have an accident. Always leave the system OFF when you are not using it. T o Set At A Desired Speed: When the vehicle has reached the desir ed speed, press [...]

T apping “RESUME ACCEL” once will result i na2m p h (3 km/h) speed increase. Each time the lever is tapped, speed increases so that tapping the lever thr ee times will increase speed by 6 mph (10 km/h), etc. T o decrease speed while speed contr ol is ON, push down and hold “SET DECEL”. Release the lever when the desired speed is r eached, a[...]

V ehicles equipped with four speed automatic transaxles may experience a downshift to 3rd gear while climbing uphill or descending downhill. This downshift to 3rd gear is necessary to maintain vehicle set speed. On steep hills a greater speed loss or gain may occur so it may be preferable to drive without speed contr ol. GARAGE DOOR OPENER — IF E[...]

For additional information on HomeLink 威 , call 1–800– 355–3515, or on the internet at www .homelink.com. W ARNING! A moving garage door can cause injury to people and pets in the path of the door . People or pets could be seriously or fatally injured. Only use this transceiver with a garage door opener that has a “stop and reverse” fea[...]

Programming The Universal T ransceiver For best results, install a new battery in the hand held transmitter before pr ogramming. If your garage door opener (located in the garage) is equipped with an antenna, make sure that the antenna is hanging straight down. 1. T urn off the engine. W ARNING! V ehicle exhaust contains carbon monoxide, a danger- [...]

4. Using both hands, pr ess the hand held transmitter button and the desired Universal T ransceiver button. Do not release the buttons until step 5 has been completed. NOTE: Some entry gates and garage door openers may requir e you to replace step 4 with the pr ocedures listed under Canadian Programming. HomeLink Programming (Sedan) HomeLink Progra[...]

5. The indicator light in the Universal T ransceiver will begin to flash, first slowly and then rapidly . The rapid flashing indicates successful programming. If after 90 seconds the indicator light does not flash rapidly or goes out, return to step 1 and r epeat the procedur e. T o train the other buttons, repeat steps 3 and 4. Be sur e to keep yo[...]

NOTE: The assistance of a second person may make the following programming pr ocedure quicker and easier . 1. Locate the training button on the garage door motor head unit. The exact location and color of the button may vary by garage door opener manufacturer . If you have difficulty in locating the training button, check your garage door opener ma[...]

The Universal T ransceiver light will flash slowly and then rapidly when the programming is successful. NOTE: When programming such a garage door opener or gate, unplug the device to prevent possible damage to the garage door or gate motor . Operation Press and hold the desir ed button on the Universal T ransceiver until the garage door or other de[...]

2. This device must accept any interference that may be received including interfer ence that may cause undesired operation. NOTE: Changes or modifications not expressly ap- proved by the party r esponsible for compliance could void the user’s authority to operate the equipment. HomeLink 威 is a trademark owned by Johnson Controls, Inc. POWER SU[...]

Press and hold the button in the center of the sunr oof switch to open the vent. The sunroof can be stopped at any position between closed and full vent. T o close the sunroof fr om the vent position, press and hold the switch forward. Releasing the switch will stop the movement of the sunroof and the sunr oof will remain in the partial vent positi[...]

W ARNING! In an accident, there is a greater risk of being thrown from a vehicle with an open sunroof. Y ou could also be seriously injured or killed. Always fasten your seat belt properly and make sure all passengers are properly secured too. Do not allow small children to operate the sunroof. Never allow fingers or other body parts, or any object[...]

It will accept a cigar lighter unit, which is part of the optional Smokers Package. T o preserve the heating ele- ment of the cigar lighter unit, do not hold the lighter in the heating position. As a child safety pr ecaution, this outlet is powered by the ignition switch, only when the switch is in the ⬙ ON ⬙ or ⬙ ACCESSOR Y ⬙ positions. Th[...]

This outlet is powered dir ectly by the battery , regar dless of the ignition switch position. All accessories connected to this outlet should be removed or turned of f when the vehicle is not in use, to protect the battery against discharge. The second is in the right rear car go area. Since this outlet is remote fr om the driver , it is powered b[...]

Electrical Outlet Use With Engine Off CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e. cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting. • Accessories th[...]

CAUTION! • Many accessories that can be plugged into the 12 volt power outlet, draw power from the vehicle’s battery , even when not in use; i.e. cellular phones, etc. Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine start- ing. • Accessories that draw hi[...]

Push the upper button on the front of the armr est to raise the upper cover . Inside is a slot for a power cord, an ar ea to store a cell phone, and other miscellaneous items. Push the lower button on the front of the armr est, and raise the armrest for access to the lower storage bin. The lower storage has a power outlet (if equipped), a slot for [...]

CAUTION! • Many accessories that can be plugged in draw power from the vehicle’s battery , even when not in use (i.e. cellular phones, etc.). Eventually , if plugged in long enough, the vehicle’s battery will discharge sufficiently to degrade battery life and/or prevent engine starting. • Accessories that draw higher power (i.e. coolers, va[...]

W ARNING! • T o avoid tipping, lock the shelf securely in all positions. • Do not drive this vehicle with the liftgate open, or use the shelf as a seat. • Failure to follow these warnings could result in serious or fatal injury . Position 1 (T op) Insert the front outboar d corners of the shelf panel into the top guides and slide forward. Pr [...]

Position 2 (Middle) Insert the front outboar d corners of the shelf panel into the middle guides and slide forward. Pr ess down on the back of the shelf panel to lock it into place. W ARNING! Do not load objects over 100 lbs (45 kg) in position 2 (middle). Failure to follow this warning could cause the shelf to collapse resulting in personal injury[...]

Position 4 (V ertical) Insert the front outboar d corners of the shelf panel into the vertical guides behind the rear seatbacks near the floor and slide downward. Push the shelf panel forwar d to lock it into place. W ARNING! When in the vertical position, the rear shelf panel should not be used as a barrier for large objects in the cargo area when[...]

2. T wist the knob on the underside of the panel and lower the shelf leg. 3. Install the shelf leg into the liftgate latch area as labeled on the rear scuf f plate. W ARNING! Do not load objects over 100 lbs (45 kg) in position 5 (table). Failure to follow this warning could cause the shelf to collapse resulting in personal injury . Rear Shelf Leg [...]

ROOF LUGGAGE RACK — IF EQUIPPED The crossbars and siderails ar e designed to carry the weight on vehicles equipped with a luggage rack. The load must not exceed 150 lbs (68 kg), and should be uniformly distributed over the luggage rack crossbars. Use both adjustable crossbars assemblies to support the load and distribute the load as evenly as pos[...]

CAUTION! T o avoid damage to the roof rack and vehicle, do not exceed the maximum roof rack load capacity of 150 lbs (68 kg). Always distribute heavy loads as evenly as possible and secure the load appropriately . Long loads which extend over the windshield, such as wood panels or surfboards, should be secured to both the front and rear of the vehi[...]

[...]

UNDERST ANDING YOUR INSTRUMENT P ANEL CONTENTS 䡵 Instrument Panel Featur es ................. 2 1 8 䡵 Instrument Cluster—Base ................. 2 1 9 䡵 Instrument Cluster—Pr emium .............. 2 2 0 䡵 Instrument Cluster—T urbo ................ 2 2 1 䡵 Instrument Cluster Descriptions ............ 2 2 2 䡵 Electronic V ehicle Infor[...]

▫ Electrical Disturbances .................. 2 3 9 ▫ AM Reception ....................... 2 3 9 ▫ FM Reception ........................ 2 3 9 䡵 Sales Code REF — AM/FM/CD (Single Disc) Radio W ith Optional Satellite Radio And Hands Free Phone Capability .............. 2 4 0 ▫ Operating Instructions - Radio Mode ....... 2 4 0 ▫ Operatio[...]

▫ Electronic Serial Number/Sirius Identification Number (ESN/SID) .................... 2 6 2 ▫ Selecting Satellite Mode In REF , And RAQ, Radios ............................. 2 6 3 ▫ Selecting a Channel .................... 2 6 3 ▫ Storing And Selecting Pre-Set Channels ...... 2 6 4 ▫ Using The PTY (Pr ogram T ype) Button (If Equipped) ..[...]

INSTRUMENT P ANEL FEA TURES 218 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT CLUSTER—BASE UNDERST ANDING YOUR INSTRUMENT P ANEL 219 4[...]

INSTRUMENT CLUSTER—PREMIUM 220 UNDERST ANDING YOUR INSTRUMENT P ANEL[...]

INSTRUMENT CLUSTER—TURBO UNDERST ANDING YOUR INSTRUMENT P ANEL 221 4[...]

INSTRUMENT CLUSTER DESCRIPTIONS 1. Fuel Gauge When the ignition switch is in the ON position, the pointer will show the level of fuel remaining in the fuel tank. 2. Fuel Door Reminder This is a reminder that the Fuel Filler Door is located on the front passenger’s (right) side of the vehicle. 3. T emperature Gauge The temperature gauge shows engi[...]

5. T achometer The white area of the scale shows the permissible engine revolutions-per -minute (rpm x 1000) for each gear range. Before r eaching the red ar ea, ease up on the accelerator to prevent engine damage. 6. T ransmission Range Indicator This display indicator shows the automatic transmission gear selection. 7. Odometer/T rip Odometer A v[...]

9. Malfunction Indicator Light This light is part of an onboard diagnostic system called OBD that monitors emissions, engine, and automatic transmission control systems. The light will illuminate when the key is in the ON/RUN position before engine start. If the bulb does not come on when turning the key from OFF to ON/RUN, have the condi- tion che[...]

12. Brake System W arning Light This light monitors various brake functions, including brake fluid level and parking brake application. If the brake light turns on, it may indicate that the parking brake is applied, there is a low brake fluid level or there is a pr oblem with the anti-lock brake system. The dual brake system provides a r eserve bra[...]

the ON position. The light should illuminate for approxi- mately two seconds. The light should then turn off unless the parking brake is applied or a brake fault is detected. If the light does not illuminate, have the light inspected by an authorized dealer . The light also will turn on when the parking brake is applied with the ignition switch in [...]

17. Low Fuel Light When the fuel level drops to 2 gallons, the fuel symbol will light and a single chime will sound. 18. Anti-Lock W arning Light (ABS) — If Equipped This light monitors the Anti-Lock Brake System (ABS) described elsewhere in this manual. This light will come on when the ignition key is turned to the ON position and may stay on fo[...]

turned from the OFF to the ON position, and the light will turn off after the engine is started. If the bulb does not come on during starting, have the system checked by an authorized dealer . If the light comes on and remains on while driving, stop the vehicle and shut off the engine. DO NOT OPERA TE THE VEHICLE UNTIL THE CAUSE IS CORRECTED. The l[...]

ELECTRONIC VEHICLE INFORMA TION CENTER (EVIC)–If Equipped The Electronic V ehicle Information Center (EVIC) fea- tures a driver -interactive display . It is located in the lower left part of the cluster below the fuel and engine tem- perature gauge. The EVIC consists of the following: • System Status • V ehicle information warning message dis[...]

• Left Rear T urn Signal Lamp Out (with a single chime) • Right Front T urn Signal Lamp Out (with a single chime) • Right Rear T urn Signal Lamp Out (with a single chime) • RKE Battery Low (with a single chime) • Personal Settings Not A vailable – V ehicle Not in Park (automatic transmissions) or vehicle is in motion (manual transmissio[...]

EVIC Functions Press the EVIC button until one of the following func- tions are displayed on the EVIC: • Compass/T emperature/Audio • A verage Fuel Economy • Distance T o Empty (DTE) • Elapsed T ime • Personal Settings T o Reset The Display Pressing and holding the EVIC button once will clear the resettable function curr ently being displ[...]

For additional information regar ding the compass, refer to Personal Settings (Customer Programmable Featur es) in this section. A verage Fuel Economy Shows the average fuel economy since the last reset. When the fuel economy is reset, the display will r ead “RESET” or show dashes for two seconds. Then, the history information will be erased, a[...]

Press and r elease the EVIC button until Personal Settings is displayed in the EVIC. Use the EVIC button to display one of the following choices: Language When in this display you may select differ ent languages for all display nomenclature, including the trip functions. Pressing the EVIC button while in this display selects English, Espanol, Deuts[...]

UNLOCK ALL DOORS is selected all of the doors will unlock at the first press of the r emote keyless entry unlock button. Press and hold the EVIC button when in this display until “DRIVER’S DOOR 1ST” or “ALL DOORS” appears to make your selection. Sound Horn with Remote Key Lock When ON is selected a short horn sound will occur when the rem[...]

NOTE: T urning the headlights on during the daytime causes the instrument panel lights to dim. T o increase the brightness, refer to “Lights” in this section. Delay Power Off to Accessories Until Exit When this feature is selected, the power window switches, radio, hands–free system, DVD video system, power sunroof, and power outlets will r e[...]

North is great enough to cause the compass to give false readings. In or der to ensure compass accuracy , the com- pass variance should be properly set accor ding to the compass variance map zone that the vehicle is in. NOTE: Magnetic materials should be kept away from the Instrument Panel. This is wher e the compass sensor is located. 236 UNDERST [...]

T o set the variance: with the ignition in the ON position, with a short button press (less than one seconds) pr ess and release the EVIC button several times until you have displayed the Personal Settings (Customer Program- mable Features) menu. Once in the Personal Settings (Customer Programmable Featur es) menu, press and release (less than one [...]

calibration mode. The Cal indicator will come on con- tinuously in the EVIC display to indicate that the com- pass is now in the calibration mode and that the vehicle can now be driven to calibrate. (A short EVIC button press fr om the ⬙ Calibrate Compass (Y es) ⬙ screen will exit the EVIC Customer Programmable featur es, and return it to its n[...]

RADIO GENERAL INFORMA TION Radio Broadcast Signals Y our new radio will provide excellent r eception under most operating conditions. Like any system, however , car radios have performance limitations, due to mobile op- eration and natural phenomena, which might lead you to believe your sound system is malfunctioning. T o help you understand and sa[...]

remain active for up to 45 seconds after the ignition switch has been turned off. Opening a vehicle fr ont door will cancel this feature. SALES CODE REF — AM/FM/CD (SINGLE DISC) RADIO WITH OPTIONAL SA TELLITE RADIO AND HANDS FREE PHONE CAP ABILITY NOTE: The radio sales code is located on the lower right side of your radio faceplate. Operating Ins[...]

Power Switch/V olume Control (Rotary) Press the ON/VOL contr ol to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection without stopping. T urning the volume control to the right incr eases the volume and to the left d[...]

SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to sear ch for the next listenable station, in either AM, FM or Satellite (if equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next. T o stop the search, pr ess SCAN a second time. PSCAN Button (Radio Mode) Pressing the PSCAN button, c[...]

AM/FM Button (Radio Mode) Press the button to select AM or FM Modes. Setting the T one, Balance, and Fade Press the r otary TUNE control and BASS will be dis- played. T urn the TUNE control to the right or left to increase or decr ease the Bass tones. Press the r otary TUNE control a second time and MID will be displayed. T urn the TUNE control to [...]

the SET button twice and SET 2 will show in the display window . Each button can be set for SET 1 and SET 2 in both AM and FM. This allows a total of 12 AM,12 FM and 12 Satellite (if equipped) stations to be stored into push- button memory . The stations stored in SET 2 memory can be selected by pressing the push-button twice. Every time a preset b[...]

SEEK Button (CD Mode) Press the right side of the SEEK button for the next track on the CD. Press the left side of the button to r eturn to the beginning of the current track, or r eturn to the beginning of the previous track if the CD is within the first 10 seconds of the current selection. MUTE Button (CD Mode) Press the MUTE button to cancel the[...]

RND/SET Button (Random Play Button) (CD Mode) Press this button while the CD is playing to activate Random Play . This feature plays the selections on the compact disc in random order to pr ovide an interesting change of pace. Press the SEEK button to move to the next randomly selected track. Press and hold the FF button to fast forwar d through th[...]

MUTE Button (Auxiliary Mode) Press the MUTE button to cancel the sound fr om the speakers. ⬙ MUTE ⬙ will be displayed. Press the MUTE button a second time and the sound from the speakers will return. Rotating the volume contr ol or turning OFF the ignition will also return the sound fr om the speakers. SCAN Button (Auxiliary Mode) No function. [...]

Operating Instructions - Satellite Radio — If Equipped Refer to the Satellite Radio section of the Owner’s Manual. SALES CODE RAQ – AM/FM/CD (6-DISC) RADIO WITH OPTIONAL SA TELLITE RADIO, HANDS FREE PHONE, AND VEHICLE ENTERT AINMENT SYSTEMS (VES) CAP ABILITIES NOTE: The radio sales code is located on the lower right side of your radio facepla[...]

Power Switch/V olume Control (Rotary) Press the ON/VOL contr ol to turn the radio ON. Press the ON/VOL a second time to turn OFF the radio. Electronic V olume Control The electronic volume contr ol turns continuously (360 degrees) in either dir ection without stopping. T urning the volume control to the right incr eases the volume and to the left d[...]

SCAN Button (Radio Mode) Pressing the SCAN button causes the tuner to sear ch for the next listenable station, in either AM, FM or Satellite (if equipped) frequencies, pausing for 5 seconds at each listenable station before continuing to the next. T o stop the search, pr ess SCAN a second time. MSG or INFO Button (Radio Mode) Press the MSG or INFO [...]

AM/FM Button (Radio Mode) Press the button to select AM or FM Modes. Setting the T one, Balance, and Fade Press the r otary TUNE control and BASS will display . T urn the TUNE control to the right or left to incr ease or decrease the Bass tones. Press the r otary TUNE control a second time and MID will display . T urn the TUNE control to the right [...]

T oggle the PTY button to select the following format types: Program T ype 16 Digit-Character Dis- play No program type or un- defined None Adult Hits Adult_Hits Alert Alert Alert Alert Classical Classical Classic Rock Classic_Rock College College Country Country Emergency T est Emergency T est Foreign Language Foreign_Language Information Informat[...]

station with the same selected PTY name. The PTY function only operates when in the FM mode. If a preset button is activated while in the PTY (Pr ogram T ype) mode, the PTY mode will be exited and the radio will tune to the preset station. SET/DIR Button (Radio Mode) — T o Set the Push-Button Memory When you are r eceiving a station that you wish[...]

Operation Instructions - (CD MODE for CD Audio Play) NOTE: The ignition switch must be in the ON or ACC position to operate the radio. NOTE: Note: This Radio is capable of playing compact discs (CD), recor dable compact discs (CD-R), rewritable compact discs (CD-R W) compact discs with MP3 tracks and multisession compact discs with CD and MP3 track[...]

to the beginning of the previous selection if the CD is within the first 10 seconds of the current selection. MUTE Button (CD MODE for CD Audio Play) Press the MUTE button to cancel the sound fr om the speakers. ⬙ MUTE ⬙ will be displayed. Press the MUTE button a second time and the sound from the speakers will return. Rotating the volume contr[...]

the radio will continue to play the non-removed CD. If the CD is removed and ther e are other CD’s in the radio, the radio will play the next CD afte ra2m i n u t et i meout. If the CD is removed and ther e are no other CD’s in the radio, the radio will remain in CD mode and display ⬙ INSER T DISC” for 10 seconds. If no discs are inserted w[...]

Press the RND button a second time to stop Random Play . B u t t o n s1-6( C D MODE for CD Audio Play) Selects disc position s1-6f o rP l ay/Load/Eject. Notes On Playing MP3 Files The radio can play MP3 files, however , acceptable MP3 file recor ding media and formats are limited. When writing MP3 files, pay attention to the following restric- tion[...]

writing ⬙ are most likely multisession discs. The use of multisession for CD audio or MP3 playback may result in longer disc loading times. Supported MP3 File Formats The radio will recognize only files with the *.mp3 exten- sion as MP3 files. Non-MP3 files named with the *.mp3 extension may cause playback problems. The radio is designed to recog[...]

Playback of MP3 Files When a medium containing MP3 data is loaded, the radio checks all files on the medium. If the medium contains a lot of folders or files, the radio will take more time to start playing the MP3 files. Loading times for playback of MP3 files may be affected by the following: • Media - CD-R W media may take longer to load than C[...]

LOAD / EJECT - Eject Press the LOAD/ EJECT button and the push- button with the corresponding number wher e the CD was loaded and the disc will unload and move to the entrance for easy removal. Radio display will show ⬙ EJECTING DISC ⬙ when the disc is being ejected and prompt the user to r emove the disc. If you have ejected a disc and have no[...]

AM/FM Button (CD Mode for MP3 Play) Switches back to Radio mode. RND/ PTY Button (CD Mode for MP3 Play) Pressing this button plays files randomly . SET/DIR Button (CD Mode for MP3 Play) Press the SET/DIR Button to display folders, when playing an MP3 discs that have a file/folder structur e. T urn the TUNE control to display available folders or mo[...]

System Activation T o activate your Sirius Satellite Radio service, call the toll-free number 888-539-7474, or visit the Sirius web site at www .sirius.com. Please have the following informa- tion available when activating your system: 1. The Electronic Serial Number/Sirius Identification Number (ESN/SID). 2. Credit card information. 3. Y our V ehi[...]

mode when any other button is pushed, the ignition is turned OFF , or 5 minutes has passed since any button was pushed. ESN/SID Access W ith Navigation Radios Please refer to your Navigation User’s Manual. Selecting Satellite Mode in REF , and RAQ, Radios Selecting Satellite Mode — REF Radio Press the MODE button r epeatedly until the word ⬙ [...]

NOTE: Channels that may contain objectionable content can be blocked. Contact Sirius Customer Care at 888-539- 7474 to discuss options for channel blocking or unblock- ing. Please have your ESN/SID information available. Storing and Selecting Pre-Set Channels In addition to the 12 AM and 12 FM pre-set stations, you may also commit 12 satellite stat[...]

Satellite Antenna T o ensure optimum r eception, do not place items on the roof ar ound the rooftop antenna location. Metal objects placed within the line of sight of the antenna will cause decreased performance. Lar ger luggage items should be placed as far forward as possible. Do not place items directly on or above the antenna. The luggage rack [...]

6. Do not expose the disc to direct sunlight. 7. Do not store the disc where temperatur es may become too high. RADIO OPERA TION AND CELLULAR PHONES Under certain conditions, the cellular phone being On in your vehicle can cause erratic or noisy performance from your radio. This condition may be lessened or eliminated by relocating the cellular pho[...]

The air conditioning system of your vehicle contains R-134a, a refrigerant that does not deplete the ozone layer in the upper atmosphere. The controls ar e as follows: Fan Control Use this control to r egulate the amount of air forced through the system in any mode you select. The fan speed increases as you move the control to the right fr om the O[...]

NOTE: There is a dif ference in temperatur e between the upper and lower outlets for added comfort. The warmer air goes to the floor outlets. This feature gives impr oved comfort during sunny but cool conditions. Floor Air is directed thr ough the floor outlets and side window demist outlets with a small amount through the defr ost outlet. Mix Air [...]

T emperature Control Use this control to r egulate the temperature of the air in- side the passenger compart- ment. The blue area of the scale indicates cooler tem- peratures while the r ed area indicates warmer tempera- tures. NOTE: If your air conditioning performance seems lower than expected, check the front of the A/C con- denser: located in f[...]

Circulation Control Use this button to choose be- tween outside air intake or recir culation of the air inside the vehicle. A lamp will illu- minate when you are in r ecir- culate mode. Only use the re- circulate mode to temporarily block out any outside odors, smoke, or dust and to cool the interior rapidly upon initial start up in very hot or hum[...]

Operating Tips UNDERST ANDING YOUR INSTRUMENT P ANEL 271 4[...]

W indow Fogging V ehicle side windows tend to fog on the inside in mild rainy or humid weather . T o clear the windows, use the A/C, P ANEL and blower contr ols. Direct the panel outlets toward the side windows. Do not use r ecirculate without A/C for long periods as fogging may occur . Interior fogging on the windshield can be quickly re- moved by[...]

toward the side windows when the system is in either the FLOOR, MIX, or DEFROST mode. The air is directed at the area of the windows thr ough which you view the outside mirrors. REAR WINDOW FEA TURES Electric Rear Window Defroster The push-button is located at the center of the instrument panel, below the radio. Pr ess this but- ton to turn on the [...]

CAUTION! T o avoid damaging the electrical conductors, do not use scrapers, sharp instruments, or abrasive window cleaners on the interior surface of the rear window . Labels can be peeled off after soaking with warm water . Rear Wiper/W asher Switch — If Equipped A switch on the right side of the steering column controls operation of the rear wi[...]

Adding W asher Fluid The fluid reservoir for the windshield washers and the rear window washer (If Equipped) is shar ed. It is located in the rear of the engine compartment on the passenger side and should be checked for fluid level at regular intervals. Fill the reservoir with windshield washer sol- vent (not radiator antifreeze) and operate the s[...]

[...]

ST ARTING AND OPERA TING CONTENTS 䡵 Starting Procedur es ..................... 2 8 0 ▫ Automatic T ransaxle ................... 2 8 0 ▫ Manual T ransaxle ..................... 2 8 0 ▫ Normal Starting ...................... 2 8 0 ▫ Extremely Cold W eather (Below ⫺ 20°F Or ⫺ 29°C) ................ 2 8 1 ▫ If Engine Fails T o Start .[...]

▫ AutoStick General Information ............ 2 8 9 䡵 Manual T ransaxle Operation ............... 2 9 0 ▫ 2.4 Liter T urbo— If Equipped ............. 2 9 2 ▫ Recommended Shift Speeds .............. 2 9 2 ▫ Downshifting ........................ 2 9 3 䡵 Parking Brake ......................... 2 9 4 䡵 Brake System ......................[...]

䡵 Snow T ires ........................... 3 2 0 䡵 T ire Rotation Recommendations ............ 3 2 1 䡵 Fuel Requirements ...................... 3 2 2 ▫ 2.4L Standard Engine And 2.4L Standard T urbo Engine ........................ 3 2 2 ▫ 2.4L High Output T urbo Engine ........... 3 2 2 ▫ Reformulated Gasoline ................. 3 2 3 ▫ [...]

ST ARTING PROCEDURES Before starting your vehicle, adjust your seat, adjust both inside and outside mirrors, and fasten your seat belts. CAUTION! Long periods of engine idling, especially at high engine speeds can cause excessive exhaust tempera- tures which can damage your vehicle. Do not leave your vehicle unattended with the engine running. W AR[...]

started within 3 seconds, slightly depress the accelerator pedal while continuing to crank. If the engine fails to start within 15 seconds, turn the ignition switch to the “OFF” position, wait 10 to 15 seconds, then repeat the normal starting procedur e. W ARNING! Do not attempt to push or tow your vehicle to get it started. V ehicles equipped [...]

W ARNING! Never pour fuel or other flammable liquid into the throttle body air inlet opening in an attempt to start the vehicle. This could result in flash fire causing serious personal injury . CAUTION! T o prevent damage to the starter , do not crank the engine for more than 15 seconds at a time. W ait 10 to 15 seconds before trying again. After [...]

TURBOCHARGER ⴖ COOL DOWN ⴖ CHAR T Driving Conditions Idle T ime (in minutes) Before Shut Down Normal Driving Not requir ed. Aggressive Driving or Heavily Loaded 3 T railer T ow 5 ST ARTING AND OPERA TING 283 5[...]

AUTOMA TIC TRANSAXLE — IF EQUIPPED CAUTION! Damage to the transaxle may occur if the following precautions are not observed: • Shift into P ARK only after the vehicle has come to a complete stop. • Shift into or out of REVERSE only after the vehicle has come to a complete stop and the engine is at idle speed. • Do not shift from REVERSE, P [...]

Brake/T ransmission Interlock System This system prevents you fr om moving the gear shift out of Park and into any gear unless the brake pedal is pressed. This system is active only while the ignition switch is in the ON or ACC positions. Always depr ess the brake pedal first, before moving the gear selector out of P ARK. NOTE: If a malfunction occ[...]

(N) will continue to operate. This second gear limp-in feature allows the vehicle to be driven to a dealer for service without damaging the transaxle. In the event that the problem has been momentary , the transaxle can be reset to r egain all forward gears. Stop the vehicle and shift into Park (P). T urn the Key to OFF then restart the engine. Shi[...]

W ARNING! Unintended movement of a vehicle could injure those in and near the vehicle. As with all vehicles, you should never exit a vehicle while the engine is running. Before exiting a vehicle, you should always shift the vehicle into P (Park), remove the key from the ignition, and apply the parking brake. Once the key is removed from the ignitio[...]

“R” Reverse Shift into this range only after the vehicle has come to a complete stop. “N” Neutral Engine may be started in this range. “D” Overdrive This range should be used for most city and highway driving. It provides smoothest up shifts and down shifts and best fuel economy . When frequent transaxle shifting occurs while using the [...]

AUTOSTICK — IF EQUIPPED Autostick is a driver-interactive transmission that of fers manual gear shifting capability to provide you with mor e control. Autostick allows you to maximize engine brak- ing, eliminate undesirable upshifts and downshifts, and improve overall vehicle performance. This system can also provide you with mor e control during[...]

• Y ou can start out in first, second, or third gear . Shifting into fourth gear can occur only after vehicle speed reaches 15 mph (24 km/h). • The transmission will automatically downshift to first gear when coming to a stop. • Starting out in third gear is helpful in snowy or icy conditions. • While in the Autostick mode, Speed Control wi[...]

Use each gear in numerical order - do not skip a gear . Be sure the transaxle is in FIRST gear , (not THIRD), when starting from a standing position. Damage to the clutch can result fr om starting in THIRD. For most city driving you will find it easier to use only the lower gears. For steady highway driving with light accelerations, 5th gear is rec[...]

2.4 Liter T urbo— If Equipped The neutral position of the shift lever is located between THIRD and FOUR TH gear . This is the position the shifter lever will return to automatically when neutral is se- lected. When shifting into FIFTH gear , be sure to pr ess the shifter lever all the way to the right to avoid acciden- tally selecting THIRD gear [...]

T ABLE 1-MANUAL TRANSAXLE NORMAL ACCELERA TION AND CRUISE SHIFT SPEEDS IN mph (km/h) EN- GINE SIZE MODE 1t o2 2t o3 3t o4 4t o5 2.4L T urbo Accel 15 (24) 25 (40) 40 (65) 45 (72) Cruise 15 (24) 25 (40) 42 (68) 45 (72) 2.4L Non- T urbo Accel 15 (24) 25 (40) 33 (53) 44 (70) Cruise 16 (26) 20 (32) 28 (45) 38 (61) For improved performance, your manual t[...]

CAUTION! If you skip more than one gear while downshifting or downshift at too high an engine speed, you could damage the engine, transmission, or clutch. T o maintain a safe speed and prolong brake life, shift down to 2nd or 1st when descending a steep grade. When turning a corner , or driving up a steep grade, downshift early so that the engine w[...]

NOTE: The parking brake lever will not release unless the lever is pulled up slightly past its applied position. When parking on a hill, it is important to set the parking brake before placing the gear selector in Park, otherwise the load on the automatic transaxle locking mechanism may make it difficult to move the selector out of Park. As an adde[...]

BRAKE SYSTEM Y our vehicle is equipped with power assisted brakes as standard equipment. In the event power assist is lost for any reason (for example, r epeated brake applications with the engine off), the brakes will still function. How- ever , the effort r equired to brake the vehicle will be much greater than that r equired with the power syste[...]

Anti-Lock Brake System (ABS) — If Equipped The Anti-Lock Brake System pr ovides increased vehicle stability and brake performance under most braking conditions. The system automatically “pumps” the brakes during severe braking conditions to pr event wheel lock-up. W ARNING! Pumping of the Anti-Lock Brakes will diminish their effectiveness and[...]

The ABS light monitors the Anti-Lock Brake System. The light will come on when the ignition switch is turned to the ON position and may stay on for as long as four seconds. If the ABS light remains on or comes on while driving, it indicates that the Anti-Lock portion of the brake system is not functioning and that service is requir ed. However , th[...]

• and a slight drop or fall away of the brake pedal at the end of the stop. These are all normal characteristics of ABS. W ARNING! The Anti-Lock Brake System contains sophisticated electronic equipment that may be susceptible to interference caused by improperly installed or high output radio transmitting equipment. This interfer- ence can cause [...]

W ARNING! Continued operation with reduced power steering assist could pose a safety risk to yourself and others. Service should be obtained as soon as possible. CAUTION! Prolong operation of the steering system at the end of the steering wheel travel will increase the steering fluid temperature and should be avoided when possible. Damage to the po[...]

A push-button at the center of the instrument panel, below the radio, turns the T raction Control System ON or OFF . The system is always in the “ON” mode unless: • The TRAC OFF switch has been used to turn the system off; • There is a Anti-Lock Brake System malfunction; • There is a T raction Contr ol System malfunction; • The system h[...]

This is to prevent over heating of the brake system and is a normal condition. The system will remain disabled for about 4 minutes until the brakes have cooled. The system will automatically reactivate and turn of f the TRAC OFF light. If your vehicle becomes stuck in mud, ice, or snow , turn the T raction Control System Of f before attempting to ?[...]

• European Metric tir e sizing is based on European design standards. T ires designed to this standar d have the tire size molded into the sidewall beginning with the section width. The letter ⬙ P ⬙ is absent from this tir e size designation. Example: 215/65R15 96H • L T (Light T ruck)-Metric tire sizing is based on U.S. design standards. T[...]

T ire Sizing Chart EXAMPLE: Size Designation: P = Passenger car tire size based on U.S. design standar ds ⴖ ....blank.... ⴖ = Passenger car tire based on Eur opean design standards LT = Light T ruck tire based on U.S. design standar ds T = T emporary Spare tir e 31 = Overall Diameter in Inches (in) 215 = Section W idth in Millimeters (mm) 65 = [...]

EXAMPLE: Service Description: 95 = Load Index —A numerical code associated with the maximum load a tire can carry . H = Speed Symbol —A symbol indicating the range of speeds at which a tire can carry a load corresponding to its load index under certain operating conditions. —The maximum speed corresponding to the Speed Symbol should only be a[...]

Tire Identification Number (TIN) The TIN may be found on one or both sides of the tire however the date code may only be on one side. T ires with white sidewalls will have the full TIN including date code located on the white sidewall side of the tire. Look for the TIN on the outboard side of black sidewall tires as mounted on the vehicle. If the T[...]

Tire Loading and T ire Pressure T ire Placard Location NOTE: The proper cold tir e inflation pressur e is listed on either the face of the driver’s door or the driver’s side “B” pillar . T ire and Loading Information Placard This placard tells you important information about the: 1) number of people that can be carried in the vehicle 2) the[...]

Loading The vehicle maximum load on the tire must not exceed the load carrying capacity of the tire on your vehicle. Y ou will not exceed the tire’s load carrying capacity if you adhere to the loading conditions, tir e size, and cold tire inflation pressur es specified on the “T ire and Loading Information” placard and in the “V ehicle Load[...]

Steps for Determining Correct Load Limit 1. Locate the statement “The combined weight of occu- pants and cargo should never exceed XXX pounds” on your vehicle’s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and pas- sengers from XXX kil[...]

310 ST ARTING AND OPERA TING[...]

W ARNING! Overloading of your tires is dangerous. Overloading can cause tire failure, affect vehicle handling, and increase your stopping distance. Use tires of the recommended load capacity for your vehicle. Never overload them. TIRES—GENERAL INFORMA TION Tire Pressure Proper tir e inflation pressur e is essential to the safe and satisfactory op[...]

2. Economy— Improper inflation pr essures can cause uneven wear patterns to develop across the tir e tread. These abnormal wear patterns will reduce tr ead life resulting in a need for earlier tire r eplacement. Underinflation also increases tire rolling r esistance and results in higher fuel consumption. 3. Ride Comfort and V ehicle Stability—[...]

CAUTION! After inspecting or adjusting the tire pressure, al- ways reinstall the valve stem cap–if equipped. This will prevent moisture and dirt from entering the valve stem, which could damage the valve stem. Inflation pressur es specified on the placard ar e always “cold tire inflation pr essure”. Cold tir e inflation pressure is defined as[...]

loading may be requir ed for high speed vehicle opera- tion. Refer to original equipment or an authorized tire dealer for recommended safe operating speeds, loading and cold tire inflation pr essures. W ARNING! High speed driving with your vehicle under maxi- mum load is dangerous. The added strain on your tires could cause them to fail. Y ou could[...]

Compact Spare Tire — If Equipped The compact spare is for temporary emer gency use with radial tires. It is engineer ed to be used on your style vehicle only . Since this tire has limited tread life, the original tire should be r epaired (or r eplaced) and rein- stalled at the first opportunity . W ARNING! T emporary use spare tires are for emerg[...]

Limited Use Spare — If Equipped The limited use spare tir e is for temporary emergency use on your vehicle. This tire is identified by a limited use spare tir e warning label located on the limited use spare tire and wheel assembly . This tire may look like the original equipped tire on the fr ont or rear axle of your vehicle, but it is not. Inst[...]

W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels faster than 35 mph (55 km/h) when you are stuck. And don’t let anyone near a spinning wheel, no matter what the speed. T read Wear Indicators [...]

Life of Tire The service life of a tire is dependent upon varying factors including but not limited to: • Driving style • T ire pressur e • Distance driven W ARNING! T ires and spare tire should be replaced after six years, regardless of the remaining tread. Failure to follow this warning can result in sudden tire failure. Y ou could lose con[...]

W ARNING! • Do not use a tire, wheel size or rating other than that specified for your vehicle. Some combinations of unapproved tires and wheels may change suspen- sion dimensions and performance characteristics, resulting in changes to steering, handling, and brak- ing of your vehicle. This can cause unpredictable handling and stress to steering[...]

Improper alignment will not cause vehicle vibration. V ibration may be a result of tire and wheel out-of- balance. Proper balancing will r educe vibration and avoid tire cupping and spotty wear . TIRE CHAINS Due to limited clearance, tire chains ar e not recom- mended. CAUTION! Damage to the vehicle may result if tire chains are used. SNOW TIRES So[...]

Tire Rotation Recommendations T ires on the front and r ear axles of vehicles operate at differ ent loads and perform differ ent steering, driving and braking functions. For these reasons, they wear at unequal rates, and tend to develop irregular wear pat- terns. These effects can be r educed by timely rotation of tires. The benefits of rotation ar[...]

FUEL REQUIREMENTS 2.4L Standard Engine and 2.4L Standard T urbo Engine Y our vehicle is designed to meet all emis- sion regulations and pr ovide excellent fuel economy when using high quality regular unleaded gasoline with an octane rating of 87. The use of premium gasoline is not recommended. The use of pr emium gaso- line will provide no benefit [...]

Over 40 automobile manufacturers ar ound the world have issued and endorsed consistent gasoline specifica- tions (the W orld W ide Fuel Charter , WWFC) to define fuel properties necessary to deliver enhanced emissions, engine performance, and durability for your vehicle. The manufacturer r ecommends the use of gasolines that meet the WWFC specifica[...]

MMT In Gasoline MMT is a manganese containing metallic additive that is blended into some gasoline to increase the octane num- ber . Gasolines blended with MMT offer no performance advantage beyond gasolines of the same octane number without MMT . Gasolines blended with MMT have shown to reduce spark plug life and r educe emission system performanc[...]

overheat. If you notice a pungent burning odor or some light smoke, your engine may be out of tune or malfunctioning and may requir e immediate service. Contact your dealer for service assistance. • The use of fuel additives which are now being sold as octane enhancers is not recommended. Most of these products contain high concentrations of meth[...]

the vehicle is raised. Have any abnormal conditions repair ed promptly . Until repaired, drive with all side windows fully open. • Keep the liftgate closed when driving your vehicle to prevent carbon monoxide and other poisonous ex- haust gases from entering the vehicle. ADDING FUEL The fuel tank filler tube has a restricting door about 2 inches [...]

CAUTION! Damage to the fuel system or emission control system could result from using an improper fuel tank filler tube cap (gas cap). A poorly fitting cap could let impurities into the fuel system. CAUTION! A poorly fitting gas cap may cause the Malfunction Indicator Light to turn on. CAUTION! T o avoid fuel spillage and overfilling, do not “top[...]

NOTE: T ighten the gas cap about 1/4 turn until you hear one click. This is an indication that cap is properly tightened. If the gas cap is not tighten properly , the Malfunction Indicator Light will come on. Be sure the gas cap is tightened every time the vehicle is refueled. W ARNING! A fire may result if gasoline is pumped into a portable contai[...]

CAUTION! Damage to the fuel system or emission control system could result from using an improper fuel tank filler cap (gas cap). A poorly fitting cap could let impurities into the fuel system. W ARNING! • Never add fuel when the engine is running. • Never have any smoking materials lit in or near the vehicle when the fuel cap is removed or the[...]

Common T owing Definitions The following trailer towing related definitions will assist you in understanding the following information: Gross V ehicle W eight Rating (GVWR) The GVWR is the total allowable weight of your vehicle. This includes driver , passengers, cargo and tongue weight. The total load must be limited so that you do not exceed the [...]

W ARNING! It is important that you do not exceed the maximum front or rear GA WR. A dangerous driving condition can result if either rating is exceeded. Y ou could lose control of the vehicle and have an accident. T ongue W eight (TW) The downward for ce exerted on the hitch ball by the trailer . In most cases it should not be less than 10% or more[...]

T railer Hitch Classification The rear bumper is intended to tow trailers up to 2,000 lbs (907 kg) without added equipment or alterations to the standard equipment. Y our vehicle may be factory equipped for safe towing of trailers weighing over 2,000 lbs (907 kg) with the optional T railer T ow Prep Package. See your dealer for package content. The[...]

Engine/T ransmission Frontal Area Max. GTW (Gross T railer Wt.) Max. T ongue Wt. (See Note 1) 2.4L N/A and 2.4L T urbo/Automatic* 20 Sq. Ft 1000 lbs (454 kg) 1 10 lbs (50 kg) 2.4L N/A and 2.4L T urbo/Manual* 20 Sq. Ft. 1000 lbs (454 kg) 1 10 lbs (50 kg) * N/A (Naturally Aspirated) Refer to local laws for maximum trailer towing speeds. Note 1 – Th[...]

Consider the following items when computing the weight on the rear axle of the vehicle: • The tongue weight of the trailer . • The weight of any other type of cargo or equipment put in or on your vehicle. • The weight of the driver and all passengers. NOTE: Remember that everything put into or on the trailer adds to the load on your vehicle. [...]

CAUTION! • A void towing a trailer for the first 500 miles (805 km) of vehicle operation. Doing so may damage your vehicle. • During the first 500 miles (805 km) of trailer towing, limit your speed to 50 mph (80 km/h). Perform the maintenance listed in Section 8 of this manual. When towing a trailer , never exceed the GA WR, or GCWR, ratings. W[...]

• Safety chains must always be used between your vehicle and trailer . Always connect the chains to the frame or hook retainers of the vehicle hitch. Cr oss the chains under the trailer tongue and allow enough slack for turning corners. • V ehicles with trailers should not be parked on a grade. When parking, apply the parking brake on the tow v[...]

Information section of this manual on T read W ear Indicators for the proper inspection pr ocedure. − When replacing tir es refer to the T ires–General Infor- mation section of this manual on Replacement T ires for proper tir e replacement pr ocedures. Replacing tires with a higher load carrying capacity will not increase the vehicle’s GVWR a[...]

W ARNING! Do not connect trailer brakes to your vehicle’s hy- draulic brake lines. It can overload your brake sys- tem and cause it to fail. Y ou might not have brakes when you need them and could have an accident. T owing any trailer will increase your stopping dis- tance. When towing you should allow for additional space between your vehicle an[...]

T owing Tips Before setting out on a trip, practice turning, stopping and backing the trailer in an area away fr om heavy traffic. If using a manual transmission vehicle for trailer towing, all starts must be in FIRST gear to avoid excessive clutch slippage. T owing T ips — Automatic T ransmission The “D” range can be selected when towing. Ho[...]

NOTE: Check the automatic transmission fluid level before towing. T owing T ips — Electronic Speed Control (If Equipped) − Don’t use in hilly terrain or with heavy loads. − When using the speed control, if you experience speed drops gr eater than 10 mph (16 km/h), disengage until you can get back to cruising speed. − Use speed control in [...]

If your vehicle is equipped with a manual transaxle, it may be towed with all four wheels on the ground, in a forward dir ection, at any legal highway speed, for any distance, if the transaxle is in neutral. ST ARTING AND OPERA TING 341 5[...]

[...]

WHA T T O DO IN EMERGENCIES CONTENTS 䡵 Hazard W arning Flasher .................. 3 4 4 䡵 If Y our Engine Overheats ................. 3 4 4 䡵 Jacking And T ire Changing ................ 3 4 6 ▫ Jack Location ........................ 3 4 7 ▫ Spare T ire Stowage .................... 3 4 7 ▫ Preparations For Jacking ................ 3 4 8 [...]

HAZARD W ARNING FLASHER The flasher switch is located on the instrument panel, below the radio. Depress the switch and both cluster indicators and all front and r ear directional signals will flash. Depress the switch again to turn Hazard W arning Flashers off. Do not use this emergency warning system when the vehicle is in motion. Use it when your[...]

If the pointer rises to the H (red) mark, the instr ument cluster will sound a chime. Pull over and stop the vehicle with the engine at idle, when safe. T urn off the air conditioning and wait until the pointer drops back into the normal range. If the pointer remains on the H (r ed) mark for more than a minute, turn the engine of f imme- diately an[...]

W ARNING! A hot engine cooling system is dangerous. Y ou or others could be badly burned by steam or boiling coolant. Y ou may want to call a service center if your vehicle overheats. If you decide to look under the hood yourself, refer to Section 7, Maintenance, of this manual. Follow the warnings under the Cooling System Pressure Cap paragraph. J[...]

Jack Location The jack and jack-handle are stowed behind the right r ear side trim panel in the cargo ar ea. Do not attempt to raise this vehicle using a bumper jack. Spare Tire Stowage The compact spare tir e is stowed under the rear of the vehicle by means of a hook/basket mechanism. T o re- move or stow the compact spare, use the jack handle to [...]

Spare T ire Removal Lift up the cover and fit the jack-handle over the drive nut. Rotate the nut to the left until you can remove the swivel hook from the stowage basket. Swing the basket down to remove the compact spar e tire. CAUTION! The hook is designed for use with the jack handle only . Use of an air wrench or other power tools is not recomme[...]

Jacking Instructions 1. Remove the scissors jack and lug wrench fr om the stowage bag. NOTE: If equipped with a center cap that covers the wheel nuts, pry off the cap using the small end of the lug wrench. T o reinstall the cap, make sure it is pr operly lined up before pushing it on to the wheel. 2. Loosen, but do not remove, the wheel nuts by tur[...]

Do not raise the vehicle until you are sur e the jack is securely engaged. 4. Raise the vehicle by turning the jack screw to the right, using the swivel wrench. Raise the vehicle only until the tire just clears the surface and enough clearance is obtained to install the spare tir e. Minimum tire lift provides maximum stability . W ARNING! Raising t[...]

100 ft. lbs (135 N·m). If you doubt that you have tightened the nuts correctly , have them checked with a torque wr ench by your dealer or at a service station. 8. Remove the wheel blocks and lower the jack until it is free. Stow the lug wr ench, and jack in their designated location. Secure all parts using the means pr ovided. W ARNING! A loose t[...]

W ARNING! Do not attempt to push or tow your vehicle to get it started. V ehicles equipped with an automatic trans- axle cannot be started this way . Unburned fuel could enter the catalytic converter and once the engine has started, ignite and damage the converter and vehicle. If the vehicle has a discharged battery , booster cables may be used to [...]

W ARNING! Battery fluid is a corrosive acid solution; do not allow battery fluid to contact eyes, skin or clothing. Don’t lean over battery when attaching clamps or allow the clamps to touch each other . If acid splashes in eyes or on skin, flush the contaminated area immediately with large quantities of water . A battery generates hydrogen gas w[...]

W ARNING! Rapid acceleration on slippery surfaces is danger- ous. Unequal traction can cause sudden pulling of the front wheels. Y ou could lose control of the vehicle and possibly have an accident. Accelerate slowly and carefully whenever there is likely to be poor traction (ice, snow , wet, mud, loose sand, etc.). T raction When driving on wet or[...]

and First gear . Usually the least accelerator pedal pres- sure to maintain the r ocking motion without spinning the wheels is most effective. W ARNING! Fast spinning tires can be dangerous. Forces gener- ated by excessive wheel speeds may cause tire dam- age or failure. A tire could explode and injure someone. Do not spin your vehicle’s wheels f[...]

more than 100 miles (160 km), the vehicle must be towed with the front wheels of f the ground to avoid damage to the transaxle. Manual T ransaxle Y our vehicle may be towed if the gearshift lever is in NEUTRAL. If the transaxle is not operative, the vehicle must be towed with the front wheels of f the ground. All T ransaxles CAUTION! If the vehicle[...]

CONVERTIBLE TOP MANUAL OVERRIDE If your vehicle is experiencing electrical failure (low battery , etc.) and it is necessary to raise the convertible top, perform the following steps: 1. Locate the convertible top motor bypass screw , which is found in the trunk under the convertible top storage area. 2. T urn the screw counterclockwise until the sc[...]

6. Raise the handle into the stowed position. 7. Close the convertible top motor bypass screw by turning the screw clockwise until it stops. T ighten the screw secur ely . NOTE: Failure to tighten the bypass scr ew securely can cause convertible top operating concerns. Engaging Convertible T op 358 WHA T TO DO IN EMERGENCIES[...]

MAINT AINING YOUR VEHICLE CONTENTS 䡵 2.4L T urbo Engine Compartment ............ 3 6 2 䡵 2.4L Engine Compartment ................ 3 6 3 䡵 Onboard Diagnostic System — OBD II ........ 3 6 4 ▫ Loose Fuel Filler Cap Message ............ 3 6 4 䡵 Emissions Inspection And Maintenance Programs ............................ 3 6 5 䡵 Replacement [...]

▫ Maintenance-Free Battery ................ 3 7 5 ▫ Air Conditioner Maintenance ............. 3 7 7 ▫ Power Steering — Fluid Check ............ 3 7 8 ▫ Front Suspension Ball Joints .............. 3 7 8 ▫ Body Lubrication ..................... 3 7 9 ▫ W indshield W iper Blades ................ 3 7 9 ▫ W indshield W asher Reservoir ..[...]

▫ Headlight Bulb Replacement ............. 4 0 8 ▫ Front Park/T urn Signal/Side Marker Lights . . 409 ▫ Front Fog Lights — If Equipped ........... 4 0 9 ▫ T ail/Stop, And Rear T urn Signal Lights ...... 4 1 0 ▫ Back Up Light Bulb .................... 4 1 0 ▫ Center High Mounted Stop Light .......... 4 1 0 䡵 Fluids And Capacities ...[...]

2.4L TURBO ENGINE COMP ARTMENT 362 MAINT AINING YOUR VEHICLE[...]

2.4L ENGINE COMP ARTMENT MAINT AINING YOUR VEHICLE 363 7[...]

ONBOARD DIAGNOSTIC SYSTEM — OBD II Y our vehicle is equipped with a sophisticated onboard diagnostic system called OBD II. This system monitors the performance of the emissions, engine, and automatic transmission control systems. When these systems ar e operating properly , your vehicle will provide excellent performance and fuel economy , as wel[...]

a ⬙ clicking ⬙ sound is heard. This is an indication that the gas cap is properly tightened. Pr ess the odometer reset button to turn the message off. If the pr oblem persists, the message will appear the next time the vehicle is started. This might indicate a damaged cap. If the prob- lem is detected twice in a row , the system will turn on th[...]

4. As soon as you turn your key to the ON position, you will see your MIL symbol come on as part of a normal bulb check. 5. Approximately 15 seconds later , one of two things will happen: a. The MIL will flash for about 10 seconds and then return to being fully illuminated until you turn of f the ignition key or start the engine. This means that yo[...]

DEALER SERVICE Y our dealer has the qualified service personnel, special tools and equipment to perform all service operations in an expert manner . Service Manuals are available which include detailed service information for your vehicle. Refer to these manuals before attempting any pr ocedure yourself. NOTE: Intentional tampering with emissions c[...]

could adversely affect the engine or vehicle performance. These items should be inspected if a malfunction is observed or suspected. Engine Oil Checking Oil Level T o assure pr oper engine lubrication, the engine oil must be maintained at the correct level. Check the oil level at regular intervals, such as every fuel stop. The best time to check th[...]

CAUTION! Overfilling the crankcase as indicated by an oil level above the “Max” mark on the engine oil dipstick will cause oil aeration, which can lead to loss of oil pressure and an increase in oil temperature. This could damage your engine. Change Engine Oil Road conditions and your kind of driving affects the interval at which your oil shoul[...]

change your engine oil at every interval shown on schedule “A”—NON TURBO in the maintenance sched- ule section of this manual. If none of these apply to you, and your vehicle is equipped with a T urbo Charged Engine change your engine oil at every interval shown on schedule “A”—TURBO in the maintenance schedule section of this manual. N[...]

Lubricants which do not have both, the engine oil certi- fication mark and the correct SAE viscosity grade num- ber should not be used. Synthetic Engine Oils There ar e a number of engine oils being promoted as either synthetic or semi-synthetic. If you chose to use such a product, use only those oils that ar e American Petroleum Institute (API) Ce[...]

Drive Belts — Check Condition and T ension At the mileage shown in the maintenance schedules, check all drive belts for condition and proper tension. Improper belt tension can cause belt slippage and failur e. Inspect the drive belts for evidence of cuts, cracks, or glazing and replace them if ther e is any sign of damage which could result in be[...]

CAUTION! Damage to the catalytic converter can result if your vehicle is not kept in proper operating condition. In the event of engine malfunction, particularly involv- ing engine misfire or other apparent loss of perfor- mance, have your vehicle serviced promptly . Contin- ued operation of your vehicle with a severe malfunction could cause the co[...]

• Do not shut off the engine or interr upt the ignition when the transaxle is in gear and the vehicle is in motion. • Do not try to start the engine by pushing or towing the vehicle. • Do not idle the engine with any spark plug wires disconnected for prolonged period. Engine Timing Belt Replace the engine timing belt at the intervals describe[...]

normal. The amount will depend on driving style. The air cleaner box should be cleaned out and a new make-up- air filter element should be installed during the normal air filter maintenance procedur e. W ARNING! The air cleaner can provide a measure of protection in the case of engine backfire. Do not remove the air cleaner unless such removal is n[...]

W ARNING! Battery fluid is a corrosive acid solution and can burn or even blind you. Don’t allow battery fluid to contact your eyes, skin or clothing. Don’t lean over a battery when attaching clamps. If acid splashes in eyes or on skin, flush the area immediately with large amounts of water . Battery gas is flammable and explosive. Keep flame o[...]

Air Conditioner Maintenance For best possible performance, your air conditioner should be checked and serviced by an Authorized Dealer at the start of each warm season. This service should include cleaning of the condenser fins and a performance test. Drive belt tension should also be checked at this time. W ARNING! • Use only refrigerants and co[...]

Refrigerant Recovery and Recycling R-134a Air Conditioning Refrigerant is a hydrofluorocar - bon (HFC) that is endorsed by the Environmental Pr o- tection Agency and is an ozone-saving product. How- ever , the manufacturer r ecommends that air conditioning service be performed by dealers or other service facilities using recovery and r ecycling equ[...]

Body Lubrication Locks and all body pivot points, including such items as seat tracks, doors,liftgate and hood hinges, should be lubricated periodically to assure quiet, easy operation and to protect against r ust and wear . Prior to the appli- cation of any lubricant, the parts concerned should be wiped clean to remove dust and grit; after lubrica[...]

2. Push the release tab shown in the illustration and slide the wiper blade assembly down along the arm. Gently place the wiper arm on the windshield. 3. Install the new blade assembly onto the wiper arm tip until it locks in place. Windshield W asher Reservoir The washer fluid reservoir is located in the r ear of the engine compartment on the pass[...]

Exhaust System The best protection against carbon monoxide entry into the vehicle body is a properly maintained engine exhaust system. If you notice a change in the sound of the exhaust system, or if exhaust fumes can be detected inside the vehicle, or when the underside or rear of the vehicle is damaged; have a competent technician inspect the com[...]

Cooling System W ARNING! • When working near the radiator cooling fan, dis- connect the fan motor lead or turn the ignition switch to the OFF position. The fan is temperature controlled and can start at any time the ignition switch is in the ON position. • Y ou or others can be badly burned by hot coolant or steam from your radiator . If you se[...]

Cooling System — Drain, Flush and Refill At the intervals shown on the Maintenance Schedules, the system should be drained, flushed and refilled. If the solution is dirty or contains a considerable amount of sediment, clean and flush with a reliable cooling system cleaner . Follow with a thorough rinsing to r emove all deposits and chemicals. Pro[...]

Adding Coolant Y our vehicle has been built with an improved engine coolant that allows extended maintenance intervals. This coolant can be used up to 5 Y ears or 100,000 miles before replacement. T o prevent reducing this extended mainte- nance period, it is important that you use the same coolant throughout the life of your vehicle. Please r evie[...]

W ARNING! • The warning words “DO NOT OPEN HOT” on the cooling system pressure cap are a safety pre- caution. Never add coolant when the engine is overheated. Do not loosen or remove the cap to cool an overheated engine. Heat causes pressure to build up in the cooling system. T o prevent scalding or injury , do not remove the pressure cap whi[...]

When additional coolant is needed to maintain the proper level, it should be added to the coolant bottle. Do not overfill. Points T o Remember NOTE: When the vehicle is stopped after a few miles (a few kilometers) of operation, you may observe vapor coming from the fr ont of the engine compartment. This is normally a result of moistur e from rain, [...]

• Do not change the thermostat for summer or winter operation. If replacement is ever necessary , install ONL Y the corr ect type thermostat. Other designs may result in unsatisfactory coolant performance, poor gas mileage, and increased emissions. Hoses And V acuum/V apor Harnesses Inspect surfaces of hoses and nylon tubing for evidence of heat [...]

Brake System In order to assur e brake system performance, all brake system components should be inspected periodically . Suggested service intervals can be found in the Mainte- nance Section. W ARNING! Riding the brakes can lead to brake failure and possibly an accident. Driving with your foot resting or riding on the brake pedal can result in abn[...]

NOTE: Inspection of brake hoses should be done when- ever the brake system is serviced and at every engine oil change. W ARNING! W orn brake hoses can burst and cause brake failure. Y ou could have an accident. If you see any signs of cracking, scuffing, or worn spots, have the brake hoses replaced immediately . Brake Master Cylinder The fluid leve[...]

Use only manufacturers r ecommended brake fluid, refer to Fluids, Lubricants and Genuine Parts for correct fluid type. W ARNING! Use of a brake fluid that may have a lower initial boiling point or unidentified as to specification, may result in sudden brake failure during hard pro- longed braking. Y ou could have an accident. CAUTION! Use of improp[...]

W ARNING! Overfilling the brake fluid reservoir can result in spilling brake fluid on hot engine parts and the brake fluid catching fire. Use only brake fluid that has been in a tightly closed container to avoid contamination from for eign matter . Do not allow petroleum based fluid to contaminate the brake fluid as seal damage will result! Automat[...]

Fluid Level Check The fluid level in the automatic transaxle should be checked whenever the vehicle is serviced. Operation with an improper fluid level will gr eatly reduce the life of the transaxle and of the fluid. Procedure For Checking Fluid Level T o properly check the automatic transaxle fluid level, the following procedur e must be used: 1. [...]

6. W ipe the dipstick clean and reinsert until seated. Remove dipstick and note reading. If the fluid is hot, reading should be in the cr oss hatched area marked “HOT” between the upper two holes in the dipstick. If the fluid is cold, the fluid level should be between the lower two holes, into the area marked “LOW”. If the fluid level shows[...]

If the transaxle is disassembled for any reason, the fluid and filter should be changed. Special Additives The manufacturer r ecommends against the addition of any fluid additives to the transaxle. The only exception to this policy is the use of special dyes to aid in detecting fluid leaks. The use of transmission sealers should be avoided as they [...]

Appearance Care And Protection From Corrosion Protection Of Body And Paint from Corrosion V ehicle body care requir ements vary according to geo- graphic locations and usage. Chemicals that make roads passable in snow and ice, and those that are sprayed on trees and r oad surfaces during other seasons, are highly corrosive to the metal in your vehi[...]

• Use Mopar Cleaner W ax to remove r oad film, stains and to protect your paint finish. T ake care never to scratch the paint. • A void using abrasive compounds and power buffing that may diminish the gloss or thin out the paint finish. CAUTION! Do not use abrasive or strong cleaning materials such as steel wool or scouring powder , which will [...]

oven cleaner . A void automatic car washes that use acidic solutions or harsh brushes that may damage the wheels’ protective finish. • If you carry special cargo such as chemicals, fertilizers, de-icer salt, etc., be sure that such materials ar e well packaged and sealed. • If a lot of driving is done on gravel roads, consider mud or stone sh[...]

• Oven cleaner • A car wash that uses carbide-tipped wheel cleaning brushes or acidic solutions. CAUTION! Many wheel cleaners contain acids that may harm the wheel surface. NOTE: Replacement costs for components damaged as a result of not following the r ecommended cleaning practices are consider ed the responsibility of the cus- tomer . Interi[...]

W ARNING! Do not use volatile solvents for cleaning purposes. Many are potentially flammable, and if used in closed areas they may cause respiratory harm. Cleaning Headlights Y our vehicle has plastic headlights that are lighter and less susceptible to stone breakage than glass headlights. Plastic is not as scratch resistant as glass and ther efore[...]

Cleaning Plastic Instrument Cluster Lenses The lenses in front of the instr uments in this vehicle are molded in clear plastic. When cleaning the lenses, care must be taken to avoid scratching the plastic. 1. Clean with a wet soft rag. A mild soap solution may be used, but do not use high alcohol content or abrasive cleaners. If soap is used, wipe [...]

CAUTION! A void high pressure car washes, as they can damage the top material. Also, increased water pressure may force water past the weather strips. General Cleaning Careful vacuuming of the top befor e washing is helpful in removing dust and other for eign particles. W ash in partial shade instead of direct sun. W et the entire vehicle before wa[...]

Cloth T op Additional Cleaning Procedure For additional cleaning assistance in removing stubborn stains, apply Mopar Convertible Cloth T op Cleaner (part number 05012245AA) to the complete stain, extending 2 inches (50 mm) beyond the stain. W ith a soft bristle brush, scrub in all dir ections over the stain. A void heavy scrubbing. Rinse the ar ea [...]

INTEGRA TED POWER MODULE (IPM) An Integrated Power Module is located in the engine compartment near the air cleaner assembly . This center contains cartridge fuses and mini fuses. A description of each fuse and component may be stamped on the inside of the cover . Cavity Cartridge Fuse Mini Fuse Description 1 40 Amp Green Power T op Feed 2 20 Amp Y[...]

Cavity Cartridge Fuse Mini Fuse Description 10 20 Amp Y ellow CCN, Power Locks 1 1 15 Amp Lt Blue Power Outlet 12 20 Amp Y ellow Ign Run/Acc In- verter 13 20 Amp Y ellow Pwr run/Acc Outlet RR 14 10 Amp Red IOD CCN/ Inte- rior Lighting 15 50 Amp Red RAD Fan Relay Battery Feed 16 15 Amp Lt. Blue IGN Run/Acc Cigar Ltr/ Sunroof 17 10 Amp Red IOD Feed C[...]

Cavity Cartridge Fuse Mini Fuse Description 26 15 Amp Lt. Blue ENG ASD Relay Feed 2 27 10 Amp Red IGN RUN Only ORC Feed 28 10 Amp Red IGN RUN ORC/ OCM Feed 29 EMPTY 30 20 Amp Y ellow Heated Seats 31 10 Amp Red Headlamp W asher Relay Control 32 30 Amp Pink ENG ASD Con- trol Feed 1 Cavity Cartridge Fuse Mini Fuse Description 33 10 Amp Red ABS MOD/J19[...]

CAUTION! • When installing the Integrated Power Module cover , it is important to ensure the cover is prop- erly positioned and fully latched. Failure to do so may allow water to get into the Integrated Power Module, and possibly result in a electrical system failure. • When replacing a blown fuse, it is important to use only a fuse having the [...]

REPLACEMENT BULBS LIGHT BULBS — Inside Bulb No. Center Console Floor Lamp ................. T 3 7 Climate Contr ols ...................... 6233137 Console Gear Selector ................... PC194 Dome Light (sedan) ...................... T579 Dome Light / Sport Bar Lights (convertible) .... T904 Instrument Cluster Illumination .............. 7 4 O[...]

BULB REPLACEMENT Headlight Bulb Replacement CAUTION! Do not touch the new headlight bulb with your fingers. Oil contamination will severely shorten bulb life. 1. Remove the headlight access cover splash shield, located in the front wheel well opening. 2. Disconnect the electrical connector . 3. Rotate the socket to the left one quarter turn and rep[...]

Front Park/T urn Signal/Side Marker Lights 1. Remove the headlight access cover splash shield, located in the front wheel well opening. 2. Rotate the socket to the left one quarter turn to replace and replace the bulb. Front Fog Lights — If Equipped 1. Remove the fasteners attaching the lower splash shield to gain access to the fog light. 2. T wi[...]

T ail/Stop, and Rear T urn Signal Lights 1. Remove the screw attaching the tail light housing and remove the housing fr om the vehicle. 2. T wist the bulb socket 1/4 turn to remove it from the housing. 3. Pull the bulb out of the socket and replace. Back Up Light Bulb 1. T o remove the back up lamp housing from the r ear fascia, carefully pry out o[...]

FLUIDS AND CAP ACITIES U.S. Metric Fuel (Approximate) 15 Gallons 56.7 Liters Engine Oil-W ith Filter 2.4 Liter Engines (Use API Certified SAE 5W -30 Engine Oil. 5.0 qts 4.7 Liters Cooling System * 2.4 Liter Engines (Mopar 威 Antifreeze/Coolant 5 Y ear/100,000 Miles Formula), or equivalent. 6.5 qts 6.2 Liters * Includes heater and coolant recovery [...]

FLUIDS, LUBRICANTS AND GENUINE P ARTS Engine Component Fluids, Lubricants and Genuine Parts Engine Coolant Mopar 威 Antifr eeze/Coolant 5 Y ear/100,000 Mile Formula HOA T (Hybrid Or- ganic Additive T echnology) or equivalent. Engine Oil Use API Certified SAE 5W -30 Engine Oil. Refer to your engine oil filler cap for correct SAE grade meeting Daiml[...]

Chassis Component Fluids, Lubricants and Genuine Parts. Automatic T ransmission Fluid. Mopar 威 A TF+4 Automatic T ransmission Fluid. Manual T ransmission Fluid. Mopar 威 A TF+4 Automatic T ransmission Fluid. Brake Master Cylinder Mopar 威 DOT 3, SAE J1703 should be used. If DOT 3, SAE J1703 brake fluid is not available, then DOT 4 is acceptable[...]

[...]

MAINTENANCE SCHEDULES CONTENTS 䡵 Emission Control System Maintenance ........ 4 1 6 䡵 Maintenance Schedule ................... 4 1 6 ▫ Schedule “B”—All Engines .............. 4 1 9 ▫ Schedule “A”—Non T urbo ............... 4 2 9 ▫ Schedule “A”—T urbo .................. 4 3 3 8 M A I N T E N A N C E S C H E D U L E S[...]

EMISSION CONTROL SYSTEM MAINTENANCE The “Scheduled” maintenance services, listed in bold type must be done at the times or mileages specified to assure the continued pr oper functioning of the emission control system. These, and all other maintenance services included in this manual, should be done to provide best vehicle performance and reliab[...]

• T axi, police, or delivery service (commercial ser - vice).† 〫 • Off-r oad or desert operation. • If equipped for and operating with E-85 (ethanol) fuel. NOTE: If ANY of these apply to you then change your engine oil every 3,000 miles (5 000 km) or 3 months, whichever comes first, and follow schedule “B—All Engines” of the ⬙ Mai[...]

At Each Stop for Fuel • Check the engine oil level about 5 minutes after a fully warmed engine is shut off. Checking the oil level while the vehicle is on level ground will impr ove the accu- racy of the oil level reading. Add oil only when the level is at or below the ADD or MIN mark. • Check the windshield washer solvent and add if requir ed.[...]

SCHEDULE “B”—ALL ENGINES Follow schedule “B”—All Engines if you usually operate your vehicle under one or more of the following condi- tions. Change the automatic transmission fluid and filter every 60,000 miles (100 000 km) if the vehicle is usually operated under one or more of the conditions marked with an 〫 . Change the manual tra[...]

km) or 60 months, whichever comes first, and follow schedule “B—All Engines” of the ⬙ Maintenance Sched- ules ⬙ section of this manual. If none of these apply to you, and your vehicle is equipped with a Non–T urbo Charged Engine then change your engine oil at every interval shown on schedule “A”—NON TURBO in the maintenance sched-[...]

Miles 3,000 6,000 9,000 12,000 15,000 18,000 (Kilometers) (5 000) (10 000) (15 000) (20 000) (25 000) (30 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate tires. X X X Inspect the brake linings. X Inspect the engine air cleaner filter , replace as necessary .* X Inspect the Make-up air filter , replace as n[...]

Miles 21,000 24,000 27,000 30,000 33,000 36,000 (Kilometers) (35 000) (40 000) (45 000) (50 000) (55 000) (60 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate tires. X X X Inspect the brake linings. X X Replace the engine air cleaner filter . X Replace the spark plugs. X Inspect the tie rod ends and boot se[...]

Miles 39,000 42,000 45,000 48,000 51,000 54,000 ( Kilometers) (65 000) (70 000) (75 000) (80 000) (85 000) (90 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate tires. X X X Inspect the brake linings. X Change the brake fluid. If vehicle is used for trailer towing. X Inspect the engine air cleaner filter , r[...]

Miles 57,000 60,000 63,000 66,000 69,000 72,000 ( Kilometers) (95 000) (100 000) (105 000) (1 10 000) (1 15 000) (120 000) Change engine oil and engine oil filter , if not replaced at 3 months. XXXXX X Rotate tires. X X X Inspect the brake linings. X X Replace the engine air cleaner filter . X Replace the spark plugs and ignition cables. X Inspect [...]

Miles 75,000 78,000 81,000 84,000 87,000 90,000 (Kilometers) (125 000) (130 000) (135 000) (140 000) (145 000) (150 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXXX Rotate tires. X X X Inspect the brake linings. X Inspect the engine air cleaner filter and replace as necessary .* X Replace the engine air cleaner f[...]

Miles 93,000 96,000 99,000 102,000 105,000 (Kilometers) (155 000) (160 000) (165 000) (170 000) (175 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Rotate tires. X X Inspect the brake linings. X Change the brake fluid. If vehicle is used for trailer towing. X Inspect the engine air cleaner filter and replace as [...]

Miles 108,000 11 1,000 1 14,000 1 17,000 120,000 (Kilometers) (180 000) (185 000) (190 000) (195 000) (200 000) Change engine oil and engine oil filter , if not re- placed at 3 months. XXXXX Rotate tires. X X X Inspect the brake linings. X Replace the engine air cleaner filter . *X Inspect the tie rod ends and boot seals. X Replace the Make-up air [...]

* This maintenance is recommended by the manufactur er to the owner but is not requir ed to maintain the emis- sions warranty . ‡ This maintenance is not requir ed if previously r eplaced. † This maintenance is requir ed only for police, taxi, limousine type operation, or trailer towing. 〫 This maintenance is requir ed only for police, taxi, [...]

SCHEDULE “A”—NON TURBO Miles 6,000 12,000 18,000 24,000 30,000 36,000 (Kilometers ) (10 000) (20 000) (30 000) (40 000) (50 000) (60 000) [Months] [6] [12] [18] [24] [30] [36] Change engine oil and engine oil filter . X XXXXX Rotate tires. X XXXXX Inspect the brake linings. X X Replace the engine air cleaner filter . X Replace the spark plugs[...]

Miles 42,000 48,000 54,000 60,000 66,000 (Kilometers) (70 000) (80 000) (90 000) (100 000) (1 10 000) [Months] [42] [48] [54] [60] [66] Change engine oil and engine oil filter . XXXXX Rotate tires. XXXXX Inspect the brake linings. X Replace the engine air cleaner filter . X Replace the spark plugs and ignition cables. X Inspect the tie rod ends and[...]

Miles 72,000 78,000 84,000 90,000 96,000 102,000 (Kilometers) (120000) (130000) (140 000) (150 000) (160 000) (170 000) [Months] [72] [78] [84] [90] [96] [102] Change engine oil and engine oil filter . X X X X X X Rotate tir es. X X X X X X Inspect the brake linings. X X Replace the engine air cleaner filter . X Replace the spark plugs. X Inspect t[...]

Miles 108,000 1 14,000 120,000 (Kilometers) (180 000) (190 000) (200 000) [Months] [108] [1 14] [120] Change engine oil and engine oil filter . X X X Rotate tires. X X X Inspect the PCV valve and replace if necessary . * ‡ X Replace the air cleaner filter . X Replace the engine timing belt. * X Flush and replace the engine coolant at 120 months, [...]

SCHEDULE “A”—TURBO Miles 5,000 10,000 15,000 20,000 25,000 30,000 (Kilometers) (8 000) (16 000) (24 000) (32 000) (40 000) (48 000) [Months] [6] [12] [18] [24] [30] [36] Change engine oil and engine oil filter . X XXXXX Rotate tires. X XXXXX Inspect the brake linings. X Replace the engine air cleaner filter . X Replace the spark plugs. X Insp[...]

Miles 35,000 40,000 45,000 50,000 55,000 (Kilometers) (56 000) (64 000) (72 000) (80 000) (88 000) [Months] [42] [48] [54] [60] [66] Change engine oil and engine oil filter . XXXXX Rotate tires. XXXXX Inspect the brake linings. X Flush and replace engine coolant at 60 months, if not replaced at 100,000 miles. X 434 SCHEDULE “A”—TURBO 8 M A I [...]

Miles 60,000 65,000 70,000 75,000 80,000 85,000 (Kilometers) (96 000) (104 000) (1 12 000) (120 000) (128 000) (136 000) [Months] [72] [78] [84] [90] [96] [102] Change engine oil and engine oil filter . X X X X X X Rotate tir es. X X X X X X Inspect the brake linings. X X Replace the engine air cleaner filter . X Replace the spark plugs and ignitio[...]

Miles 90,000 95,000 100,000 105,000 (Kilometers) (144 000) (156 000) (160 000) (168 000) [Months] [108] [1 14] [120] [126] Change engine oil and engine oil filter . X X X X Rotate tir es. X X X X Inspect the brake linings. X Replace the engine air cleaner filter . X Replace the spark plugs. X Adjust the generator drive belt tension. X Inspect the t[...]

Miles 1 10,000 1 15,000 120,000 (Kilometers) (177 000) (185 000) (193 000) [Month] [132] [138] [144] Change engine oil and engine oil filter . X X X Rotate tir es. X X X Inspect the PCV V alve and replace if necessary . * X Replace the engine air cleaner filter . X Replace the spark plugs and ignition cables. X * This maintenance is recommended by [...]

[...]

IF YOU NEED CONSUMER ASSIST ANCE CONTENTS 䡵 Suggestions For Obtaining Service For Y our V e h i c l e .............................. 4 4 0 ▫ Prepar e For The Appointment ............ 4 4 0 ▫ Prepar e A List ........................ 4 4 0 ▫ Be Reasonable W ith Requests ............. 4 4 0 䡵 If Y ou Need Assistance ................... 4 4 0[...]

SUGGESTIONS FOR OBT AINING SERVICE FOR YOUR VEHICLE Prepare For The Appointment If you’re having warranty work done, be sur e to have the right papers with you. T ake your warranty folder . All work to be performed may not be covered by the warranty , discuss additional charges with the service manager . Keep a maintenance log of your vehicle’s[...]

technicians, special tools, and the latest information to assure your vehicle is fixed corr ectly and in a timely manner . This is why you should always talk to your dealer’s service manager first. Most matters can be resolved with this process. • If for some reason you ar e still not satisfied, talk to the general manager or owner of the deale[...]

Customer Assistance For The Hearing Or Speech Impaired (TDD/TTY) T o assist customers who have hearing difficulties, the manufacturer has installed special TDD (T elecommuni- cation Devices for the Deaf) equipment at its Customer Center . Any hearing or speech impaired customer who has access to a TDD or a conventional teletypewriter (TTY) in the U[...]

W ARRANTY INFORMA TION (U.S. V ehicles Only) See the W arranty Information Booklet for the terms and provisions of DaimlerChrysler’s warranties applicable to this vehicle. MOP AR 姞 P ARTS Mopar 威 fluids, lubricants, parts, and accessories are available from your dealer . They will help you keep your vehicle operating at its best. REPORTING SA[...]

PUBLICA TION ORDER FORMS T o order the following manuals, you may use either the website or the phone numbers listed below . V isa, Mas- tercar d, American Express, and Discover or ders are ac- cepted. If you prefer mailing your payment, please call for an order form. NOTE: A street addr ess is required when or dering manuals. (No P .O. Boxes). •[...]

Call T oll Free at: • 1–800–890–4038 (U.S.) • 1–800–387–1 143 (Canada) Or V isit us on the W orld Wide W eb at: • www .techauthority .daimlerchrysler .com • www .daimlerchrysler .ca/manuals DEP ARTMENT OF TRANSPORT A TION UNIFORM TIRE QUALITY GRADES The following describes the tire grading categories estab- lished by the Nationa[...]

on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction perfor - mance. W ARNING! The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning, or peak traction characteristics. T emperature Grades The temperature [...]

INDEX 10[...]

ABS (Anti-Lock Brake System) .............. 2 9 7 Adding Engine Coolant (Antifreeze) .......... 3 8 4 Adding Fuel ........................... 3 2 6 Adding W asher Fluid .................. 187,275 Additives, Fuel ......................... 3 2 4 Air Cleaner , Engine (Engine Air Cleaner Filter) . . . 374 Air Conditioner Maintenance ............... 3 7[...]

Special Additives ...................... 3 9 4 Autostick ............................. 2 8 9 Back-Up Lights ......................... 4 1 0 B a l l J o i n t s ............................. 3 7 8 Battery ............................... 3 7 5 Keyless T ransmitter Replacement (RKE) ..... 3 0 , 3 5 B e l t s ,D r i v e ............................ 3 7[...]

Caution, Exhaust Gas ..................... 1 1 4 CD (Compact Disc) Player ............... 240,248 CD (Compact Disc) Player Maintenance ........ 2 6 5 Cellular Phone ....................... 136,266 Center High Mounted Stop Light ............ 4 1 0 Chains, T ire ............................ 3 2 0 Changing A Flat T ire ..................... 3 4 6 Char[...]

Drain, Flush, and Refill .................. 3 8 3 Inspection ........................... 3 8 5 Points to Remember ................. 384,386 Pressur e Cap ......................... 3 8 4 Selection of Coolant (Antifreeze) ........... 3 8 3 Corrosion Pr otection ..................... 3 9 5 Crankcase Emission Control System .......... 3 7 4 C r u i s e[...]

Emergency Deck Lid Release Latch (Convertible) . . 41 Emergency , In Case of Jacking ............................. 3 4 6 Jump Starting ......................... 3 5 1 T o w i n g ............................. 3 5 5 Emergency Seat Back Release (Sedan) .......... 4 0 Emission Control System Maintenance ...... 365,416 Engine ..........................[...]

Fluid Leaks ............................ 1 1 5 Fluid Level Checks Automatic T ransaxle .................... 3 9 2 F l u i d s ................................ 4 1 2 Fluids, Lubricants and Genuine Parts .......... 4 1 2 Fog Light Service ........................ 4 0 9 Fog Lights .......................... 183,227 Folding Front Passenger Seat .......[...]

Gauges Coolant T emperature .................... 2 2 2 Fuel ................................ 2 2 2 Odometer ........................... 2 2 3 T achometer .......................... 2 2 3 Gearshift .............................. 2 8 6 General Information ...................... 1 7 General Maintenance ..................... 3 6 7 Glass Cleaning ......[...]

Instrument Panel and Contr ols .............. 2 1 8 Instrument Panel Cover ................... 3 9 9 Instrument Panel Lens Cleaning ............. 4 0 0 Integrated Power Module .................. 4 0 3 Interior Appearance Car e .................. 3 9 8 Interior Lights .......................... 1 8 0 Intermittent W ipers (Delay W ipers) ........... [...]

Dimmer Switch, Headlight ............... 1 8 1 Engine T emperature W arning .............. 2 2 6 F o g .......................... 183,227,409 Front Replacement ..................... 4 0 8 Headlight Switch ...................... 1 8 2 Headlights ........................... 1 8 2 High Beam Indicator .................... 2 2 8 Instrument Cluster .....[...]

Maintenance Schedule Schedule “A”-Non T urbo ................. 4 2 9 Schedule “A”-T urbo .................... 4 3 3 Schedule “B” ......................... 4 1 9 Schedule “B”-All Engines ................ 4 1 9 Maintenance Schedules .................... 4 1 6 Malfunction Indicator Light (Check Engine) . . 224,365 Manual Override, Conv[...]

F i l t e r ............................... 3 7 1 Identification Logo ..................... 3 7 0 Materials Added to ..................... 3 7 1 Q u a l i t y ............................. 3 7 0 Recommendation .................... 370,41 1 Synthetic ............................ 3 7 1 V iscosity ............................ 3 7 0 Oil Pressur e Light[...]

Pregnant W omen and Seat Belts ............ 5 5 , 8 9 Preparation for Jacking .................... 3 4 8 Pretensioners Seat Belts ........................... 5 3 , 8 7 Programmable Electr onic Features ...... 194,198,232 Programming T ransmitters (Remote Keyless Entry) ............. 2 7 , 3 4 , 194,198 Radial Ply T ires ......................... 3 [...]

Safety Checks Outside V ehicle ............... 1 1 5 Safety Defects, Reporting .................. 4 4 3 Safety Information, T ire ................... 3 0 2 Safety T ips ............................ 1 1 4 Satellite Radio .......................... 2 6 1 Satellite Radio Antenna ................... 2 6 5 Schedule, Maintenance .................... 4 1 [...]

Security Alarm (Theft Alarm) ................ 3 6 Sentry Key (Immobilizer) ................. 1 5 , 3 7 Sentry Key Programming ................... 1 7 Service and Maintenance .................. 4 1 6 Service Assistance ....................... 4 4 0 Service Contract ......................... 4 4 2 Service Manuals ........................ 4 4 4 Settin[...]

T emperature Gauge, Engine Coolant ....... 222,345 T ether Anchor , Child Restraint ............ 7 6 , 1 0 9 Theft Alarm (Security Alarm) ................ 3 6 Theft System (Security Alarm) ............... 3 6 T ilt Steering Column ..................... 1 8 7 T ire and Loading Information Placard ......... 3 0 7 T ire Identification Number (TIN) ...[...]

Recreational .......................... 3 4 0 W e i g h t .............................. 3 3 2 T raction .............................. 3 5 4 T raction Control ...................... 188,300 T raction Control Switch ................. 188,300 T r a i l e r T o w i n g .......................... 3 2 9 Cooling System T ips .................... 3 4 0 H[...]

Uniform T ire Quality Grades ................ 4 4 5 Universal T ransmitter ..................... 1 9 2 Unleaded Gasoline ....................... 3 2 2 Untwisting Procedur e, Seat Belt ............ 5 2 , 8 6 V acuum/V apor Harnesses ................. 3 8 7 V a n i t y M i r r o r s .......................... 1 3 5 V ariance, Compass ................[...]