Cisco Systems ME 2400 manuale d’uso

Corporate He adquarters Cisc o Syst ems , Inc . 170 West Ta sman Drive San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Cisco ME 240 0 Ethernet A ccess Switc h Hardware Installation Guide No vem ber 2005 Text Pa rt Nu mber: OL-7678- 01[...]

THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJE CT TO CHANGE WITHOUT NO TICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BU T ARE PRESEN TED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TA KE FULL RESPONSIBILITY FOR THEIR AP PLICATION OF ANY PR[...]

iii Cisco ME 2400 Ether net Access Switc h Hardware Inst allati on Guide OL-7678-01 CONTENTS Preface vi i Audienc e vii Pur pose vii Organi zation vi i Conv enti ons viii Relat ed P ubl icatio ns xiii Obtain ing Docu mentati on xiv Cisco. com xi v Produc t Documentat ion DVD xiv Orderi ng Documenta tion xv Document ation F eedback xv Cisco Pr oduct[...]

Cont ent s iv Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Rear P anel Descri ption 1-6 Powe r Con necto rs 1-7 Cisco ME AC Swit ch Power Sup ply 1-7 Cisco ME DC Swit ch Power Sup ply 1-7 Consol e Port 1-7 Management Options 1-7 Network Co nfig uration s 1-8 CHAPTER 2 Swit ch Ins talla tion 2-1 Prepar ing fo r Ins[...]

Content s v Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 APPENDI X A Technical Specificat ions A-1 APPENDI X B Connector and Cable Specif ications B-1 Connect or S pecifi catio ns B-1 10/1 00 Ports B-1 SFP Module Ports B-2 Consol e Port B-3 Cable an d Adapte r Specifi cation s B-3 Two T wiste d-Pair Cable Pinouts [...]

Cont ent s vi Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01[...]

vii Cisco ME 2400 Ether net Access Switc h Hardware Inst allati on Guide OL-7678-01 Preface Audience This guide is for the netw orking or computer technician responsib le for installing the Cisco Metr o Ether net (ME) 2400 Series Eth erne t Access switch , hereaf ter known as the switch. W e assume that you are fam ilia r with the conce pts and te [...]

viii Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Preface Conv ent ions Appendix B, “ Connec tor an d Cable Spe cifications,” describe s the co nnecto rs, cable s, and adapters that can be us ed to co nnec t to the s witc h. Appendix C, “ Connect ing t o DC Power” de scribes h ow to conne ct the Cisco ME s[...]

ix Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 Pre face Convent ions Va ro it us TÄRKEITÄ TURV A LLISUUSOHJEIT A Tämä varoitusmerkki merkitsee vaaraa. T ilanne voi aiheuttaa ruumiillisi a vammoja. Ennen kuin käsittelet laitt eistoa, huomioi sähköpiirien kä sittelemiseen li ittyvät riski t ja tutustu onne[...]

x Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Preface Conv ent ions Avi s o INSTR UÇÕES IM PORT ANTES DE SEG URAN ÇA Este símbolo de aviso significa perigo. V ocê está em uma situação que poderá ser causadora de lesões corporais. Antes de iniciar a utilização de qualquer equipamento , tenha conhecimen[...]

xi Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 Pre face Convent ions Avi s o INSTR UÇÕES IM PORT ANTES DE SEG URAN ÇA Este símbolo de aviso signi fica perigo. Você se encontra em uma situação em que há risco de lesões corporais. Antes de trabalhar com qualquer equipamento, esteja ciente dos ris cos que e[...]

xii Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Preface Conv ent ions[...]

xiii Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 Pre face Relate d Publ icati ons Related Publications Y ou can orde r prin ted copies of docum ent s with a DOC-x xxxxx= numb er . For more info rmation, see t he “Obtai ning D ocumen tation” sect ion on page xiv . These do cuments p rovid e comple te informati[...]

xiv Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Preface Obtain ing Do cument ation • Cisco ME 24 00 E thern et Acces s Sw itch Comm and R efer enc e (order numb er DOC-78-78 -17061 = ). This referen ce provid es deta iled de scri ptions of the Ci sco I OS comman ds spe cificall y create d or modified for the sw[...]

xv Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 Pre face Documen tation Fee dback The Product Documentat ion D VD is ava ilable as a single unit or as a subsc ription. Re gistered Cisco.com users (Cisco direct customers) can o rder a Prod uct Doc umentat ion D VD ( product numb er DOC-DOCD VD=) from Cisco Mark etp[...]

xvi Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Preface Obtain ing Techni cal Ass istance Reporting Se curity Problems in Cisco P roducts Cisco is committ ed to deli veri ng secure products. W e test our products internally be fore we release them , and we striv e to correct a ll vulnerabilities quickly . If you [...]

xvii Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 Pre face Obtaining Technical Assistance Note Us e the Cisco Product Ident ification (CPI) to ol to locate your product ser ial numb er b efore su bmitt ing a web or phon e request for service. Y ou can access th e CPI tool fr om the Cisco T echni cal Support & [...]

xviii Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Preface Obtainin g Addi tional Pub lications and Informat ion Obtaining Ad ditional Publication s and Informatio n Informa tion ab out Cisco pro ducts, t echnologi es, and ne twork soluti ons is av ailable from various online and printe d source s. • Cisco Marke[...]

C HAPTER 1-1 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 1 Product Overview The Cisco M etro Ethern et (M E) 2400 Ether net A ccess swi tch—al so ref erred to as the switch —is a n Ethernet access swit ch to which yo u can co nnect other network devices such a s routers, other switc hes, a home acce ss gat ew a[...]

1-2 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 1 P roduct Overv iew Front Pane l Descript ion – 100BASE-LX – 1000BASE-BX – 1000BASE-LX/LH – 1000BASE-SX – 1000BASE-T – 1000BASE-ZX – Coarse wav elength-division m ultiplexing (CWDM) Note When installed in Cisco ME switches, 1000B AS E-T SFP mo[...]

1-3 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 1 Product Overv iew Front Panel Description Front Panel D escription s The 1 0/100 Fast Ethe rnet po rts on the swit ch are gr ouped in pair s. The first mem ber o f the pair (port 1) is above the se cond me mber ( port 2) on th e left . Port 3 is ab ove port [...]

1-4 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 1 P roduct Overv iew Front Pane l Descript ion When set f or autone g otiation , the port senses the sp eed and duplex settings o f the attac hed de vice and adve rtises its o wn capabiliti es. If the connected de vice al so supports au tonego tiation, th e [...]

1-5 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 1 Product Overv iew Front Panel Description SFP Module Patch Cable The Cisco ME switch supports the SFP module patch cable, a 1/2 meter , copper , passi ve cable wit h SFP modul e connec tors a t each end ( see Figure 1-3 ). Th e patch cabl e can connec t tw o[...]

1-6 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 1 P roduct Overv iew Rear Panel Des cription The Syste m LED shows whether th e system is rec eiving po wer and is func tioning properly . Ta b l e 1 - 1 lists the LED colors and the ir meanin gs. Port LEDs Each RJ -45 port and SFP mo dule slot ha s a port L[...]

1-7 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 1 Product Overv iew Manageme nt Options Power Con nectors These secti ons descr ibe t he power su pply fe ature s for the Cisc o ME A C an d DC sw itches . Cisco ME AC Switch Power S upply The Cisco ME A C switch is po wered thro ugh an internal po wer supply [...]

1-8 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 1 P roduct Overv iew Managem ent Opt ions • SNMP network mana gement Y o u can mana ge switches fr om a SNMP-c ompatible managem ent station that is runni ng platfor ms such as HP OpenV ie w or Su nNet M anager . The sw itch suppo rts a c omprehe nsiv e se[...]

C HAPTER 2-1 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 2 Switch Instal lation This chapte r describes ho w to start your Cisco Metro Ether net (ME) switch and ho w to interpret the po wer- on self-test (POST) that ensures proper opera tion. It also describ es how to insta ll the switch and how to make connect ion[...]

2-2 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 2 Switch Installation Prepar ing for Inst allat ion War ni n g Do not stack the chassis on any other equipment. If t he chassis falls, it can cause severe bodily injury and equipment da mage. Statement 48 War ni n g Ethernet cables must be sh ielded when use[...]

2-3 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 2 Switch Inst allation Preparing for Installation War ni n g This unit is intended for installat ion in restri cted access area s. A restricted access area can be accessed only through the use of a sp ecial tool , lock and key , or other means of security . St[...]

2-4 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 2 Switch Installation Prepar ing for Inst allat ion War ni n g Installation of t he equipment must comp ly with local and nati onal electrical codes. Statement 1 074 Cautio n T o c omply with the T elco rdia GR- 1089 Ne twork E quipment Buildin g System s (N[...]

2-5 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 2 Switch Inst allation Preparing for Installation Note When u sing sho rter dista nces of singl e-mode fiber -optic ca ble, you might nee d to insert a n inline opt ical attenua tor in the l ink to avoid o verloading the rece i ver . When the f iber -optic cab[...]

2-6 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 2 Switch Installation Prepar ing for Inst allat ion • Airflow around the switch an d through the vent s is unrestric ted. • T emperatur e aroun d the unit doe s not exc eed 113 °F (50°C). Note If th e switch is installed in a closed or mu ltirack assem[...]

2-7 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 2 Switch Inst allation Verifying Switch Operation Verifying Switch Operatio n Before inst alling t he switch in a rack, on a wall, or on a tabl e or shelf, you should power the switch and verif y that the switch passes POST . T o power o n the switc h, con nec[...]

2-8 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 2 Switch Installation Instal ling the Swi tch . Note Installing the switch in a 24-inch rack requires an optional brack et kit that is not included wit h the switch. Y ou can or der a kit c ontai ning the 24-i nch ra ck-moun ting b rackets and ha rdware from[...]

2-9 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 2 Switch Inst allation Install ing th e Switch Attaching Brackets to the Sw itch The b racket orie ntatio n and th e bra ckets that you u se depe nd on w hether y ou are attac hing t he brac kets for a 19 -inch, 2 3-inch, 24-inch , or an ETSI rack. Figur e 2-2[...]

2-10 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 2 Switch Installation Instal ling the Swi tch Attaching B rackets to 19-I nch Racks These figures show how to attach brac kets to 19-i nch ra cks: • Attachin g Brack ets for 19-I nch Rac ks to a Cisco M E Switch, Front P anel F orward , Figure 2-3 on page[...]

2-11 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 2 Switch Inst allation Install ing th e Switch Figur e 2-5 At tachi ng Brac kets f or 1 9-Inch T elco Rack s to a Cisco ME S witch Attaching B rackets for 23-Inch Ra cks These figures show how to attach brac kets to 23-i nch ra cks: • Attachin g Brack ets f[...]

2-12 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 2 Switch Installation Instal ling the Swi tch Figur e 2-7 Attac hing Brac k e ts fo r 23-Inc h Rac ks to a Cisco ME S witc h, Rear P anel F orwar d Figur e 2-8 Attac hing Brac k e ts fo r 23-Inc h T elco Ra cks t o a Cisco ME S witch Attaching B rackets to [...]

2-13 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 2 Switch Inst allation Install ing th e Switch Figur e 2-9 Attac hing Brac k e ts fo r 24-Inc h Rac ks to a Cisco ME S witc h, F ront P a nel F orwar d Figur e 2-1 0 At tac hing Br ack ets fo r 24-Inc h Racks t o a Cisc o ME Sw itc h, Rear P anel F orw ard Fi[...]

2-14 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 2 Switch Installation Instal ling the Swi tch Attaching B rackets for ETSI Racks These f igures sho w attaching bra ckets to ET SI racks : • Attachin g Brack ets for ETSI Racks to a Cisco ME Switch, Fr ont P anel F orward , Figure 2 -12 on page 2-14 • A[...]

2-15 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 2 Switch Inst allation Install ing th e Switch Figur e 2-14 At tachi ng Br ack ets for ETSI T elco Racks t o a Ci sco ME S witc h Mounting the Switch in a Rack After the brac kets are attached to the switch, u se the four supplied num ber-12 Phillips machine [...]

2-16 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 2 Switch Installation Instal ling the Swi tch Attaching the Cable Guide W e recommend attachin g the cable guide to pre ve nt the cables from obscuring the front panel of the switch and the other devices in stalled i n the r ack. Use t he suppl ied bla ck s[...]

2-17 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 2 Switch Inst allation Install ing th e Switch Mounting the Switch on a Wall For th e best support of the switch and cables, mak e sure the switch is attac hed securely to wal l studs or to a firmly atta ched plywo od mounti ng backboa rd. Mo unt the sw itch [...]

2-18 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 2 Switch Installation Installi ng and Rem oving SF P Mo dules Table- or Shelf- Mounti ng Foll ow these steps to install the switch on a table or shelf: Step 1 Place the s witch on th e table or shel f near an A C po wer source. Step 2 After th e switch i s [...]

2-19 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 2 Switch Inst allation Installing and Removing SFP Modules Figur e 2-1 9 SFP Mo dule with a Ba le-Clasp Latc h T o insert an SFP module into the module slot, follo w these steps (see Figure 2-20 ): Step 1 Attach an ESD-pre venti ve wrist strap to your wrist a[...]

2-20 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 2 Switch Installation Installi ng and Rem oving SF P Mo dules Step 6 Insert the cable connector into the SFP module: • For f i ber-optic SFP modules, insert the LC or MT -RJ cable connector into the SFP module. • For c opper 1000B ASE-T SFP modules, i n[...]

2-21 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 2 Switch Inst allation Inserting and Removing the SFP Module Patch Cable Inserting an d Removing the SFP Module Patch Cable T o insert an SFP module patch cable into the SFP module slot, f ollo w these steps: Step 1 Attach an ESD-pre venti ve wrist strap to y[...]

2-22 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 2 Switch Installation Connecti ng to the 10 /100 Ports Connecting to the 10/100 Ports The s witch 10 /100 ports co nfigure th emsel ves to ope rate a t the speed of attac hed devices. If the attac hed ports do not support autone gotiation, y ou can e xplici[...]

2-23 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 2 Switch Inst allation Conne cting to SFP Modu les Step 3 Reconfigur e an d reboot the conn ected device, if necessar y . Step 4 Repeat Steps 1 t hrough 3 to con nect eac h de vice . Connecting to SFP Modu les This section describ es how to connect to SFP mod[...]

2-24 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 2 Switch Installation Connecting t o SFP Modu les Step 4 Observ e the port stat us LED. The LED turns gree n when the switch and the target device ha ve an establis hed link. The LED turns ambe r while the STP discovers the network topol ogy and sear ches f[...]

2-25 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 2 Switch Inst allation Where t o Go Next Step 3 Observ e the port stat us LED. The LED turns gree n when the switch and the target device ha ve an establis hed link. The LED turns ambe r while the STP discovers the network topol ogy and sear ches fo r loops. [...]

2-26 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 2 Switch Installation Where to Go Nex t[...]

C HAPTER 3-1 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 3 Troubleshooting The System and port LEDs on the front pa nel provi de troubleshootin g information about th e switch. They sho w failur es in the p o we r -on s el f-t es t (POST) , port-connecti vity problems, and ove rall switch perform ance. For a ful l [...]

3-2 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 3 Trouble shooti ng Diagno sing Proble ms Ta b l e 3 - 1 de scribe s how to detec t and resolve these pro blems. T a ble 3-1 Common Pr oblems and Their Solutions Sympt om Possibl e Cause Resol ution Poor p erformance or ex cessive errors Duple x auton egotia[...]

3-3 Cisco ME 2400 Ethernet Acc ess Switch Hardware Insta llation Guide OL-7678-01 Chapter 3 Troubleshoot ing Diagnosing Proble ms No connect ivity Incorrect or bad cable These are re sults of no link at both ends: • A crossover cable was used when a straight -throu gh was required, o r the rev erse. • The cable is wired incorrectly . • A cros[...]

3-4 Cisco M E 2400 Et hernet Access Switc h Hardware Inst allation Guide OL-7678-01 Chapter 3 Trouble shooti ng Diagno sing Proble ms Switch does not recognize the SFP modul e The SFP module might be installed upsi de do wn. The SFP module does not snap into the slot. V erify that the SFP module is not installe d upside down. Remov e the SFP module[...]

A- 1 Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 APPEND IX A Technical Specifications This app endix lists th e switch t echnical sp ecific ations in Ta b l e A - 1 . T able A -1 T echn ical Spe cifications fo r the Cisco ME 2400 Ether net A ccess S witc h Enviro nmenta l Rang es Oper ating temperatur e 32 to 113[...]

A- 2 Cisco M E 2400 Et hernet Access Switc h Hardware Inst alla tion Guide OL-7678-01 Appendi x A Technical Speci fication s[...]

B-1 Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 APPEND IX B Connector and Cabl e Specifications This a ppendix descri bes the Ci sco ME swit ch port s and t he cabl es an d adap ters that yo u use t o conn ect the switch to other de v ices. Connector Specific ations These section s describe the connecto rs used w[...]

B-2 Cisco M E 2400 Et hernet Access Switc h Hardware Inst alla tion Guide OL-7678-01 Appendi x B Connector a nd Cabl e Specif ication s Connecto r Specificati ons Note Y ou can use the mdix auto interfac e confi guration command in the CLI to ena ble the automatic mediu m-depen dent inte rface crosso v er (auto-M DIX) feat ure. When the aut o-MDIX [...]

B-3 Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 Append ix B Connector and Cab le Specifi cations Cable and Adapter Specif icati ons Figur e B-3 Cop per SFP Module RJ-45 Connec tor Console P ort The cons ole p ort uses a n 8-pin RJ- 45 conn ector, which is descri bed in Ta b l e B - 1 and Ta b l e B - 2 . I f yo u[...]

B-4 Cisco M E 2400 Et hernet Access Switc h Hardware Inst alla tion Guide OL-7678-01 Appendi x B Connector a nd Cabl e Specif ication s Cable and A dapter Spec ifications Figur e B-5 T wo T wis ted-P air Cross ov er Cable Sc hematic Four Twisted-Pa ir Cable Pinou ts for 1 000BASE-T Ports Figure B-6 and Figur e B-7 show the schematics of four twiste[...]

B-5 Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 Append ix B Connector and Cab le Specifi cations Cable and Adapter Specif icati ons Crossove r Cab le and Ad apter Pinouts This se ction describe s how to ide ntify a cros sover cable an d also desc ribes the adapt er pi nouts. Identifying a Crossover Cable T o id e[...]

B-6 Cisco M E 2400 Et hernet Access Switc h Hardware Inst alla tion Guide OL-7678-01 Appendi x B Connector a nd Cabl e Specif ication s Cable and A dapter Spec ifications Ta b l e B - 2 lists t he p inouts fo r th e co nsole p ort, RJ- 45-to-D B-25 femal e DTE a dapte r , and the console device. Note The R J - 45 - t o - DB - 2 5 f em a l e D T E a[...]

C-1 Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 APPEND IX C Connecting to DC Power T o conn ect the Cisco ME switc h to a DC-i nput po wer s ource, f ollo w these step s: 1. Preparin g for Inst allation, pa ge C-1 2. Grounding the Sw itch, page C- 2 3. W iring t he DC- Input Power Sour ce, pa ge C -5 War ni n g E[...]

C-2 Cisco M E 2400 Et hernet Access Switc h Hardware Inst alla tion Guide OL-7678-01 Appendi x C Connect ing to DC P ower Groundi ng the Switch • 6-gauge co pper gr ound wire (insulat ed or nonins ulate d) • Four leads of 1 8-gauge co pper wir e • W ire-stripp ing tools for stripping 6- a nd 18-gau ge wires Grounding the Switch War ni n g Thi[...]

C-3 Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 Append ix C Connecting to DC Power Groundi ng the Swi tch Figur e C-2 Crim ping the G r ound Lug Step 5 Use t he two number-10-32 screws to attach the g round lug an d wire asse mbly t o the rear panel of the switch. Step 6 Using a ra tcheting t orque screwdri ver ,[...]

C-4 Cisco M E 2400 Et hernet Access Switc h Hardware Inst alla tion Guide OL-7678-01 Appendi x C Connect ing to DC P ower Groundi ng the Switch Connecting the Grounding Wire to Earth Ground Next you must conn ect the ot her end of th e ground ing wire to an a ppropr iate groun ding poin t at your site or to the te lco rack . Y ou can conn ect the g[...]

C-5 Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 Append ix C Connecting to DC Power Wiring the DC-Input Power Sour ce Complete thes e steps: Step 1 Remove all paint or oxid ation fr om the rack at the poin t of the gro unding con nection . Step 2 Use a 3/16 -inch fl at-he ad screwdriver to loosen the ground ing sc[...]

C-6 Cisco M E 2400 Et hernet Access Switc h Hardware Inst alla tion Guide OL-7678-01 Appendi x C Connect ing to DC P ower Wiring the D C-Input Power So urce Figur e C-6 T er minal Bloc k Plug Step 3 Identify t he positi ve and nega ti ve fe ed positions for th e terminal block connec tion. The wiri ng sequence is posi tiv e to po sitive and negativ[...]

C-7 Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 Append ix C Connecting to DC Power Wiring the DC-Input Power Sour ce War ni n g An exposed wire lead from a DC-input power source can conduct harmful levels of electricity. Be sure that no exposed portion of the DC-i nput power source wire extends from the terminal [...]

C-8 Cisco M E 2400 Et hernet Access Switc h Hardware Inst alla tion Guide OL-7678-01 Appendi x C Connect ing to DC P ower Wiring the D C-Input Power So urce Figur e C-1 0 T orquing the T er minal-Bloc k Captiv e Scr ews Step 7 Repeat Steps 4 and 5 for the r emainin g thre e DC -input power source wire s. Figur e C- 11 sho ws the comp leted w iring [...]

C-9 Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 Append ix C Connecting to DC Power Wiring the DC-Input Power Sour ce Cautio n Secure the wires comin g in from the terminal b lock so that they can not be di sturb ed by cas ual cont act. For example, use t ie wrap s to se cu re the wi res to the ra ck. Figur e C-12[...]

C-10 Cisco M E 2400 Et hernet Access Switc h Hardware Inst alla tion Guide OL-7678-01 Appendi x C Connect ing to DC P ower Wiring the D C-Input Power So urce[...]

D- 1 Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 APPEND IX D Configuring the Switch with the CLI-Based Setup Program This ap pendi x provides a com mand-l ine in terface (C LI)-b as ed setup proce dure for a st andal one swi tch. For produc t overview infor mati on, see Chapter 1, “Product Ov ervie w .” Befor[...]

D- 2 Cisco M E 2400 Et hernet Access Switc h Hardware Inst alla tion Guide OL-7678-01 Appendix D Configuring the Switch with the CLI-Based Setup Program Access ing the CLI Through the Console Port Taking Out W hat You Need Re move th e i te ms s hown in Figure D -1 from the shipping co ntainer : Figur e D-1 The Cisco ME S witc h, A dapt er Cable, a[...]

D-3 Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 Append ix D Configuring t he Switch wi th the CLI-Ba sed Set up Progra m Connecting to the Console Port Note Y ou ne ed to provide the Ca tegory 5 strai ght-throu gh ca bles t o conn ect t he s witch p orts to ot her Ether net devices. Note Y ou ca n use the CLI mdi[...]

D- 4 Cisco M E 2400 Et hernet Access Switc h Hardware Inst alla tion Guide OL-7678-01 Appendix D Configuring the Switch with the CLI-Based Setup Program Starting the Term inal-Em ulation Softw are Figur e D-3 Connec ting the S witch to a PC See Appendix C, “Con necting t o DC Po wer,” for DC po wer connec tion instructions. Starting the Termina[...]

D-5 Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 Append ix D Configuring t he Switch wi th the CLI-Ba sed Set up Progra m Connecting to a Power Source Connecting to a Powe r Source Foll ow these steps to connect to an A C po wer source: Step 1 Connect one end of the supplied AC po wer co rd to the power conne cto [...]

D- 6 Cisco M E 2400 Et hernet Access Switc h Hardware Inst alla tion Guide OL-7678-01 Appendix D Configuring the Switch with the CLI-Based Setup Program Enterin g the Initial Conf igurati on Informat ion Completing the Setup Program Foll ow these steps to complete the setup prog ram and to create an initial con fig uration for the switch: Step 1 En[...]

D-7 Cisco ME 2400 Ethernet Ac cess Switc h Hardware Inst allati on Guide OL-7678-01 Append ix D Configuring t he Switch wi th the CLI-Ba sed Set up Progra m Entering the Initial Configuration Information Step 9 Ente r Y to conf igure the switch as the clus ter command switch. E nter N to con fig ure it as a member swit ch or as a s tandalone swi tc[...]

D- 8 Cisco M E 2400 Et hernet Access Switc h Hardware Inst alla tion Guide OL-7678-01 Appendix D Configuring the Switch with the CLI-Based Setup Program Enterin g the Initial Conf igurati on Informat ion[...]

IN-1 Cisco ME 2400 Ether net Access Switc h Hardware Inst allati on Guide OL-7678-01 INDEX Numerics 10/100 por ts cable l ength s 2-4 connec ting t o 2-22 conn ectors and cables B-1 t o B-2 describe d 1-3 illustrated 1-2 1000BASE-BX SFP mo dule 1-4 1000BASE-LX/LH SFP modu le 1-4 1000BASE-SX SFP module 1-4 1000BASE-T SFP mod ule 1-4 1000BASE-T SFP m[...]

Index IN-2 Cisco ME 2400 Ether net Access Switc h Har dware Installa tion Guide OL-7678-01 coarse wa velength-divisio n multiplexing See CWDM comm and-l ine i nte rfac e See CLI config urati on exam ples , network 1-1 connect ing to 10 /10 0 por ts 2-22 to conso le port B-3 to DC power 2-7 to SFP modules 2-23 to 2-25 to the console por t D-3 connec[...]

Inde x IN-3 Cisco ME 2400 Ether net Access Switc h Hardware Inst allati on Guide OL-7678-01 I installati on assigni ng the IP Addr ess D-5 conn ecting to a p ower sour ce 2-7, D-5 rack-m ountin g 2-7 to 2-15 shelf-mou nting 2-18 site requir ements 2-4 starting the terminal em ulation softwar e D- 4 tabl e-mounti ng 2-18 wall-mount ing 2-16 See also[...]

Index IN-4 Cisco ME 2400 Ether net Access Switc h Har dware Installa tion Guide OL-7678-01 power connec ting t o AC 2-7 connec ting t o DC 2-7 power on 2-7 power- on self -tes t see POST power sour ce warn ing 2-2 power suppl y AC power outle t 1-7 proc edur es connect ion 2-22 to 2-25 installati on 2-7 to 2-18 product disposa l warni ng 2-3 public[...]

Inde x IN-5 Cisco ME 2400 Ether net Access Switc h Hardware Inst allati on Guide OL-7678-01 U user-ser vicea ble pa rts w arning 2-3 W wall-mount ing 2-16 wall-mo unting warni ng 2-2 warnings Class 1 laser 2-2 DC power 2-2, C-5 defined vi ii disposal of product 2-3 elec trica l code co mplianc e 2-4 Ether net cabl e C-1 expos ed DC power wire C-7 g[...]

Index IN-6 Cisco ME 2400 Ether net Access Switc h Har dware Installa tion Guide OL-7678-01[...]