Cisco 3040 manuale d’uso

Corporate He adquarters Cisc o Syst ems , Inc . 170 West Ta sman Drive San Jos e, CA 95 134-1706 USA http://www.ci sco.com Tel: 408 526-4000 800 553- NETS (638 7) Fax: 408 526-4100 Cisco Catal yst Blade S witc h 3040 fo r FSC Hardware Installation Guide S epte mber 2006 Text Pa rt Numbe r: OL-10 694-0 1[...]

THE SPECIFICATIONS AND INFORMATION REGARDING TH E PRODUCTS IN THIS MANUAL ARE SUBJE CT TO CHANGE WITHOUT NO TICE. ALL STATEMENT S, INFORMATI ON, AND RECOMMENDA TIONS IN T HIS MANUAL ARE BELIEVED TO BE ACCURATE BU T ARE PRESEN TED WITHOUT WARRANTY OF ANY KIND, EXPRE SS OR IMPLIED. USERS MUST TA KE FULL RESPONSIBILITY FOR THEIR AP PLICATION OF ANY PR[...]

iii Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 CONTENTS Preface vi i Audienc e vii Pur pose vii Organi zation vi i Conv enti ons viii Relat ed P ubl icatio ns vii i Obtain ing Docu mentati on ix Cisco. com ix Produc t Documentat ion DVD ix Orderi ng Documenta tion x Document ation F eedback x Cisco Product Secu[...]

Cont ent s iv Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Management Options 1-5 Using th e Devic e Manager 1-5 Using th e Management Bl ade Web In terf ace 1-6 Using the C omm and -Line Inte rface 1-8 Other Mana gement Op tions 1-8 Network Co nfig uration s 1-8 CHAPTER 2 Blade Switch Installat ion 2-1 Prepar[...]

Content s v Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 APPENDI X B Connector and Cable Specif ications B-1 Connect or S pecifi catio ns B-1 10/1 00/1000 Po rts B-1 Connect ing to 10BASE-T- an d 100BASE -TX-Compa tible Dev ices B-1 Connect ing to 1000 BASE-T Devices B-2 SFP Module Ports B-2 Consol e Port B-3 Cab[...]

Cont ent s vi Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01[...]

vii Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Preface Audience This guide is for the netwo rking or computer techn ician responsible for insta lling the Cisco Catalyst Bla de Swit ch 30 40 fo r FSC, refe rred t o as the blade switch, in the Fujitsu Siemens Computers (FSC) PRIMERGY BX600 S2 blade se rve r , ref[...]

viii Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Preface Conv ent ions Conven tions This docu ment u ses these c on ventions and s ymbols for no tes, cau tions, and war nings: Note Means r e ader ta ke no te . Notes cont ain he lpful sugg esti ons or ref eren ces t o mat erial s no t cont ained in this manual[...]

ix Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Pre face Obtaining Documentation • These c ompatibility matr ix documents are a v ailable f rom this Cisco.com site : http://www .cisco.com/e n/US/products/hw/modules/ps5455/produc ts_device_s upport_tables_list.html – Cisco Gigabit E thernet T ransceiver Mo dul[...]

x Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Preface Docum entation Fe edback Ordering Docume ntation Y ou must be a registe red Cisco .com user t o acc ess Cisco M arketpla ce. Regi stered user s may or der Cisco docume ntatio n at the Prod uct Docum entation St ore at this URL: http://www .cisco.com /go/ma[...]

xi Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Pre face Produc t Alerts an d Field Not ices In an e mergency , you c an al so reac h PSIR T by te lephone: • 1 877 228-7302 • 1 408 525-6532 Ti p W e enc ourag e you to use Pretty Good Privacy (PGP) or a compa tibl e product (for examp le, Gn uPG) to encrypt an[...]

xii Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Preface Obtain ing Techni cal Ass istance Access to all tools on the Cisco T echnical Support & Documentation we bsite requ ires a Cisco. com user ID and passwo rd. If you have a v alid service c ontract but do not have a user ID or password, you can regi st[...]

xiii Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Pre face Obtaining Additional Publications and Information Definitions of Servic e Re quest Sev erity T o ensure that all s ervice re quest s are repor ted in a stand ard for mat, Cisco h as establish ed se ver ity def initi ons. Se verity 1 ( S1)—An existing ne[...]

xiv Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Preface Obtainin g Addi tional Pub lications and Informat ion • Networking produ cts offered by Ci sco S ystems, as we ll as custom er sup port serv ices, can be obtaine d at th is URL : http://www .cisco.com/en /US/products/i ndex.ht ml • Networking Profess[...]

C HAPTER 1-1 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 1 Product Overview This c hapter provides a func tional overview of the Cisco Ca talys t Blad e Switc h 3040 for FSC, refe rred to as the blade swit ch . The blade switch i s instal led in the Fujitsu Siemens Computer s (FSC) PRIMER GY BX600 S2 blade s e[...]

1-2 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 1 P roduct Overv iew Front Panel De scrip tion Front Panel Descri ption T en of t he port s on t he 16-p ort Gigabit E thernet blade sw itch a re in ternal 1000BASE-X ports that connect to the BX600 sys tem through the b ackplane. Figure 1-1 shows the c [...]

1-3 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 1 Product Overv iew Front Panel Description 10/100/1 000 Ports The two cop per Ethe rnet por ts oper ate at 10, 100 , or 1000 Mb ps and suppo rt auton egotiati on and full-dupl ex opera tion. When set f or aut onegotiati on, the port se nses th e spee d a[...]

1-4 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 1 P roduct Overv iew Front Panel De scrip tion LEDs The b lade s witch has eigh t LED s inc ludin g an LED for eac h exter nal por t, on e LED for t he c onsol e por t, and one LE D used by BX600 system managem ent boar d (see Figure 1- 1 ). Y ou can use[...]

1-5 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 1 Product Overv iew Rear Pane l Descript ion Rear Panel Description The bl ade sw itch c onnec ts to the BX 600 system th rough the backpla ne conn ecto r on t he b lade switch rea r pane l. Se e Figure 1-2 . Figu re 1 - 2 Blade Switch R ear Panel Note Y [...]

1-6 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 1 P roduct Overv iew Managem ent Option s Step 3 Use t he device ma nager t o perf orm b asic b lade swi tch configu ration a nd mo nitorin g. Re fer to the d evice manage r online hel p for mor e inform ation . Using the M anage ment Blade We b Interfac[...]

1-7 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 1 Product Overv iew Manageme nt Options Y ou ca n do these t asks: • In the Loca ted LED f ield, ch oose on or off , and click Apply to locate the blade switch . • Under Network Set ting, c lick the URL A ddress field t o open the bl ade swi tch we b [...]

1-8 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 1 P roduct Overv iew Managem ent Option s Using the Co mmand -Line Interface Y ou ca n enter Cisc o IOS comma nds and para meters thr ough the CL I. Acce ss the CLI either by connec ting y our PC di rectl y to t he bl ade sw itch co nsole p ort or thro u[...]

C HAPTER 2-1 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 2 Blade Switch Ins tallation This chapt er provides instruc tions on how to install your Cisco Catalyst Blade Swit ch 3040 for FSC, referr ed t o a s th e blade s wit ch , in the Fujitsu Sie mens PRIMERGY BX600 S2 system, an d to set up and conf igure it[...]

2-2 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Preparing fo r Instal lation Warn ings These w arnings a re translate d into se veral languages in the Re gulatory Com pliance and Safety Informat ion for the Cisco Catalyst Blad e Switch 3040 for FSC that sh ips with the pro[...]

2-3 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Preparing for Installation Installation Guidelines Before you install th e blade switch in the BX600 system, co nsider these points: • Rev ie w and be come f amiliar with the saf ety guideli nes in t he Re gulatory Com plia[...]

2-4 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation BX600 Syst em Archite cture These i tems s hip wi th your blade switch: • Cons ole cabl e • Cisco Catalyst Blade Switc h 3040 for FSC Getting Started Guide • Re gulato ry Complian ce and Safe ty Info rmation for th e Ci[...]

2-5 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion BX600 System Architecture Figure 2-2 s hows the BX600 syste m manageme nt bla de on the le ft and an op tiona l advanced KVM blade on the right. Figur e 2-2 BX600 Sy st em Manag e ment and Adv anced KVM Bla des Ta b l e 2 - 1[...]

2-6 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Overview of Steps for Ins talling and Initially Conf iguring t he Blade Swi tch Consider these re quirements before you install your blade switc h: • The NE T1 and NET2 sl ots ar e a pair . If th e NET 2 slo t is used , the[...]

2-7 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Overview of Steps for Installing and Initially Configuring the Blade Switch Cautio n Keep dummy blade s for future use. If you re move the blade switch and do not repla ce it with anot her one, you must re install a dum my bl[...]

2-8 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Overview of Steps for Ins talling and Initially Conf iguring t he Blade Swi tch Figure 2-4 sh ows the blade switch be ing inserted into the BX60 0 system. Figur e 2-4 Inser ting th e Blade S witc h int o the BX600 Sys tem Ste[...]

2-9 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Overview of Steps for Installing and Initially Configuring the Blade Switch Figur e 2-5 Connecting thro ugh the Blade S witch Console P or t Step 2 Start t he term inal emula tion session so t hat yo u can see th e outpu t di[...]

2-10 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Overview of Steps for Ins talling and Initially Conf iguring t he Blade Swi tch Figur e 2-6 Connecting thro ugh the BX600 S yst em Mana gemen t Blade Step 2 On the PC terminal emulat ion program: a. Set the data format to 8 [...]

2-11 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Overview of Steps for Installing and Initially Configuring the Blade Switch Note I f the BX600 sy stem is alrea dy conf igured, obta in the mana gement blade usern ame and password from th e system ad ministra tor . If you u[...]

2-12 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Overview of Steps for Ins talling and Initially Conf iguring t he Blade Swi tch Step 9 Ente r 1 in the Conso le Redirect Bla de Switch m enu if you are co nfig uring the blade switch in the NET1 slot, 2 if you are c onfiguri[...]

2-13 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Overview of Steps for Installing and Initially Configuring the Blade Switch Completing the Initial Configuration Foll ow th ese steps to complete the setup prog ram and to create an initial co nfig uration. Note For infor ma[...]

2-14 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Overview of Steps for Ins talling and Initially Conf iguring t he Blade Swi tch Step 8 T o conf igure the interf ace, enter Ye s after the prom pt, and then en ter th e blade switch IP address an d subnet mask. Press Return [...]

2-15 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Installing and Removing SFP Modules Step 12 D isconnect the BX60 0 sy stem se rial po rt o r the blade switch consol e por t from the PC . See the “Mana gement O ptions” section o n page 1- 5 for i nform ation about conf[...]

2-16 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Installing and Rem oving SFP Mod ules Removing and installing an SFP module can shorte n its useful life. Do not remove and insert SFP modules m ore often th an is ab solutely ne cessary . Figur e 2-7 SFP Module with a Bale-[...]

2-17 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Installing and Removing SFP Modules Removin g SFP Mod ules from SFP M odule S lots T o remove an SFP module from a module receptacle, follo w these steps: Step 1 Attach an ESD-pre venti ve wrist strap to your wrist and to a [...]

2-18 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Conne cting to the 10/10 0/10 00 Ports Connecting to the 10/100/1000 Ports The 10 /100/10 00 ports co nf igure the mselve s to op erate at th e speed of attached de vices. I f the attach ed ports do not support autone gotiat[...]

2-19 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Conne cting to SFP Modu les You can use the mdix auto interface conf iguratio n command i n the CL I to enable the auto matic mediu m-depen dent inte rface crosso v er (auto-M DIX) feat ure. When the aut o-MDIX featu re is e[...]

2-20 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Where to Go Next Figur e 2-1 1 Installing an SFP Mo dule Step 3 Inse rt the othe r cable end into a f iber -o ptic re ceptacle o n a target d e vice. Step 4 Observ e the port statu s LED. • The LED turn s green whe n the b[...]

2-21 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 2 Blade Switc h Installat ion Where t o Go Next • Usi ng the Mana geme nt Bl ade W eb Inte rf ace Y ou can monitor and m anag e the bl ade sw itches thr ough the BX600 system web i nterfac e. Follow the se step s: a. Launch a we b browser on your PC or[...]

2-22 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 2 Bla de Switch Installation Where to Go Next[...]

C HAPTER 3-1 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 3 Troubleshooting The LEDs on the front panel pro vide troublesh ooting informati on about the blade switch . They sho w failur es in the p o we r - o n s el f-t es t (POST) , port- connecti vity problems, and ove rall blade swi tch perform ance. For a f[...]

3-2 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 3 Troubleshoo ting Diagnos ing Problem s Y ou can a ccess th e T echnical Support W ebsite ( http ://www .cisco.com/t ac ) for a list of known ha rdware proble ms and extensive troubleshoot ing doc umenta tion, inc luding : • Field notic es • Securit[...]

3-3 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 3 Troubleshoot ing Diagnosing Problems T able 3-1 Common Pr oblems and The ir Solutions Symptom Possible Cause Resolu tion Poor performan ce or excessive erro rs Duple x autone gotiation mismatch . Refer to the blad e switch software configurati on guide [...]

3-4 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 3 Troubleshoo ting Diagnos ing Problem s No connect ivity Incorre ct or bad cable The se are res ults of no li nk at bot h ends: • A crosso v er cable was used when a s traig ht-throug h was requir ed, or vice- versa. • The cab le is wi red incorr ec[...]

3-5 Cisco Catalyst Blad e Switch 3040 for FSC Hardware Installation Gui de OL-10694-01 Chapter 3 Troubleshoot ing Locati ng the Blad e Switch S erial Nu mber Locating the Blad e Switch Serial Number If you cont act Cisc o T echni cal A ssistance , you need to know the serial n umber of your swi tch. See Figure 3-1 to locate the seri al number on yo[...]

3-6 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Chapter 3 Troubleshoo ting Locatin g the Blade Switch Serial Number[...]

A- 1 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 APPEND IX A Technical Specifications This ap pendix lists th e blade s witch te chnical specif ications in Ta b l e A - 1 . See the Regulatory Complian ce and Safet y Informat ion for the Cisco Catalyst Bl ade Switch 3040 for FSC g uide for informa tion about safe[...]

A- 2 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Appendi x A Technical Speci fication s[...]

B-1 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 APPEND IX B Connector and Cabl e Specifications This app endix des cribes the blade switch p orts and th e cables and adapters that yo u use to conn ect the blade swit ch to other devices. Connector Specific ations These section s describe the connecto rs used with[...]

B-2 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Appendi x B Connector a nd Cabl e Specif ication s Connector Spe cificatio ns Connecting to 1000BASE-T Devices When you con nect t he ports t o 100 0B ASE-T devices, such as s ervers, workstat ions , and r outers, you must use a four twisted-p air , Categor y 5,[...]

B-3 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Append ix B Connector and Cab le Specifi cations Cable and Adapter Specif icati ons Console P ort The co nsole port uses a n 8-p in RJ -45 conn ecto r, wh ich is descri bed i n Ta b l e B - 1 and Ta b l e B - 2 . The supplied RJ- 45-to-D B-9 ada pter cabl e is used[...]

B-4 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Appendi x B Connector a nd Cabl e Specif ication s Cable and Ad apter Speci ficatio ns Four Twisted-Pa ir Cable Pinou ts for 1 000BASE-T Ports Figure B-5 and Figur e B-6 sh ow the schem atics of four t wist ed-pair cable s for 10/100/ 1000 por ts on the blade sw[...]

B-5 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Append ix B Connector and Cab le Specifi cations Cable and Adapter Specif icati ons Figur e B-7 Identifying a Cros sov er Cable Adapter Pino uts Ta b l e B - 1 lists th e pino uts for the cons ole por t, the RJ -45-to- DB-9 a dapter cable, a nd the co nsole de vice[...]

B-6 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Appendi x B Connector a nd Cabl e Specif ication s Cable and Ad apter Speci ficatio ns T able B-2 Console P or t Signalin g Using a DB-25 Ada pter Switch Cons ole Port (DT E) RJ-45-to- DB-25 T e rmin al Ad apt er Cons ole Devi ce Signal DB-25 Pi n Signal RT S 5 [...]

C-1 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 APPEND IX C Configuring the Switch with the CLI-Based Setup Program This chapte r prov ides a quick installati on and setup procedur e for the blade switch by using the comm and-l ine i nte rface ( CL I). Note For detaile d installation procedures, see Chapter 2, ?[...]

C-2 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Appendix C Configuring the Switch with the CLI-Based Setup Program Accessi ng the CLI Throu gh the Co nsole Port Note If the blade swit ches ar e ordered with the bla de serv er , the blade switc hes are already i nstalled, and no unpacki ng is requi red. The u [...]

C-3 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Append ix C Configuring the Swi tch with the CLI -Based Se tup Program Accessi ng the CL I Throug h the Co nsole Port Figur e C-1 Connecting thro ugh the Blade S w itc h Console P ort Step 2 Start t he term inal emula tion sessi on so that yo u can see th e out put[...]

C-4 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Appendix C Configuring the Switch with the CLI-Based Setup Program Accessi ng the CLI Throu gh the Co nsole Port Step 5 W ait for the switch to complete flash ini tializati on. When you see the prompt, Press Retur n to Ge t Started! , press Return or Enter . Ste[...]

C-5 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 Append ix C Configuring the Swi tch with the CLI -Based Se tup Program Accessi ng the CL I Throug h the Co nsole Port Step 6 (Option al) Configure Simple Network Manage ment Proto col (SNMP) by respon ding to the pro mpts. 1. T o configur e SNMP later , press Retur[...]

C-6 Cisco Catalyst Blade S witch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 Appendix C Configuring the Switch with the CLI-Based Setup Program Accessi ng the CLI Throu gh the Co nsole Port Step 10 Th ese choice s app ear: [0] Go to the IOS command prompt without saving this config. [1] Return back to the setup without saving this config[...]

IN-1 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 INDEX Numerics 10/100/10 00 ports connec ting t o 2-18 conn ectors and cables B-1 t o B-2 descript ion 1-3 illustrated 1-2 A adap ter pino uts, termi nal RJ-45-to -DB-25 B- 5 RJ-45-to -DB-9 B-5 advanc ed K VM bl ade 2-5 auto -MDIX 1-3, 2-19, B-1, C-2 autonegotiati[...]

Index IN-2 Cisco Catalyst Blade Switch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 conn ectors and cables 10/100/10 00 ports B-1 to B-2 console port B-3 to B-6 SC connec tors B-2 SFP module ports B-2 console port conn ectors and cables B-3 t o B-6 descript ion 1-2 console port LED descript ion 1-4 location 1-2 convent ions , documen t vi[...]

Inde x IN-3 Cisco Catalyst Blade Switch 3040 for FSC Hardware Installation Guide OL-10694-01 M manage ment blad e web interfac e descript ion 1-6 how to access 2-21 managing the b lade switch using SNMP 1-8, 2-21 using the CLI 2-21 usin g the de vice ma nage r 1-5 usin g the ma nage ment b lade web interf ace 1-6 N network c onfigura tion ex ample [...]

Index IN-4 Cisco Catalyst Blade Switch 3040 for FSC Hardwar e In stallation Guide OL-10694-01 system status/ID LED descript ion 1-4 location 1-2 T techn ical speci fication s A-1 Telnet, a nd acc essing th e CLI 2-21 temper ature, operatin g A-1 temper ature co ntrol 1-1 temper ature mon itor 1-1 trained and qualifie d personne l warning 2-2 troubl[...]