Citizen C650 manuale d’uso

Setting Instructions for Movement Caliber C650 Contents 1. FEATURES 2. BEFORE USING 3. SECIFICATIONS 4. NAME OF COMPONENTS AND MAJOR FUNCTIONS 5. SWITCHING THE MODE (DISPLAY FUNCTIONS) 6. CHECKING O-POSITION OF EACH HAND 7. ACCESSING TIMES OF DATES OF MAJOR CITIES 8. SWITCHING ANALOG TIME AND DIGITAL TIME 9. SETTING THE TIME (TIME IS CORRECTED BY D[...]

This watch is a combination solar-powered watch that contains a solar cell in it s face that drives the watch hands, alarm, chronograph, timer and numerous other functions by converting light energy into electrical energy. It is also equipped with convenient functions including three power save modes that reduce power consumption when light is not [...]

3. Specifications Movement Caliber Number C650 Accuracy Within +/- 15 seconds per month (when worn at normal temperatures of 5 o C to 35 o C/(41 o F to 95 o F) Operating temperature range Watch operating temperature range : 0 o C +55 o C (3 2 o F to 131 o F) Analog Display Time: Second, minutes, hours, 24 hours, UTC minute s, UTC hours, mode Time S[...]

4. NAMES OF COMPONEN TS AND MAJOR FUNCTIONS Name /Mode Time Calendar Alarm 1 Alarm 2 Alarm 3 Chronograph T imer Zone Setting (1) Mode Hand TME CAL AL-1 AL-2 AL-3 CHR TMR SET (2) Hour Hand Always Indicates Hours (3) Minute Hand Always Indicates Minutes (4) Second Hand Always Indicates Seconds (5) 24 Hour Hand Always indicates “24-Hour time” in c[...]

5. SWITCHING THE MODE (DISPLAY FUNCTIONS) In addition to the time and date modes, this watch is also equipped with three additio nal modes consisting of the alarm, chronograph and timer modes. The mode can be switched by turning the crown. Check the current mode with the mode hand. <Switching the Mode> 6. CHECKING O-POSITION OF EACH HAND Befo[...]

O-Position Correction (Setting to the Watch Base Position) When setting the 0-position of each hand, always make sure to turn the crown forward (clock- wise) to set each hand to its 0-position in the clockwise direction. 1. Turn the crown while in the normal position to set the mode hand to the chronograph [CHR] mode. 2. Pull the crown out to the s[...]

7. ACCESSING TIMES OR DATES OF MAJOR CITIES The time of date of major cities pre-registered in this watch can be easily accessed b y pressing the buttons. <Access Procedure> 1. Turn the crown to set the mode hand to the time [TME] or calendar [CAL] mode. 2. When button (A) is pressed, the times or dates of major cities are displayed while scr[...]

8. SWITCHING ANALOG TIME AND DIGITAL TIME This watch is able to switch between analog time display and digital time display. <Switching Procedure> 1. Turn the crown to set the mode hand to the time [TME) mode. 2. Press button (A) and (B) simultaneously. 3. After a confirmation tone sounds, the watch switches the time of the city displayed by [...]

10. SETTING THE DATE (DATE IS CORRECTED BY DIGITAL DISPLAY) 1. Turn the crown and set the mode hand to the calendar [CAL] mode. 2. Press either button (A) or button (B) to access the city to be corrected. 3. When the crown is pulled out to the second click (date setting position), the watch enters the date correction state. 4. When button (A) is pr[...]

11. USING THE ALARM MODE The alarm setting procedure and other procedures for alarm use are the same for Alarm 1, 2 and 3. Only the tone that sounds is different. The alarm sounds for 15 seconds when the set time is reached once a day. When the alarm is sounding, it can be turned off by pressing button (A) or (B). <Setting the Alarm Time> 1.T[...]

<Switching Alarm ON and OFF> The alarm can be switched ON and OF by pulling out the crown to the first click even when not in the alarm correction state. 1. Pull out the crown to the first click in the alarm mode to allow the alarm to be switched ON and OF. 2. Pressing button (B) switches the alarm ON and OF each time it is pressed. 3. Return[...]

13. USING THE TIMER The timer can be set to a maximum of 99 minutes in 1-minute units. When the set time has elapsed, a tone indicating that the set time is up sounds for about 5 seconds, after which the timer returns to the timer initial setting display. <Timer Initial Setting Display> <Setting the Timer> 1. Turn the crown to set the m[...]

14. USING ZONE SETTING The zone setting function enables only those cities for which "SET" has been select ed to be easily accessed (displayed) in each mode. Daylight savings time can be also be set for each city. In addition, the user is also able to arbitrarily register one city and time difference. <Using Zone Setting> 1.Turn the[...]

6. Turn the crown to display the time difference. 7. After setting, return the crown to the normal position. <Characters and Symbols Used in City Names> • Letters of the alphabet (A to Z) • Numbers (0-9) • Symbols (--: hyphens, M: blank spaces) <Display Sequence> When the crown is turned forward (clockwise), the display changes in[...]

4. This fully lit display is canceled when the crown is returned to the normal position. x After canceling, a confirmation tone is sounded after which each of the hands perfo rm a demonstration movement in the order of the second hand, minute hand, UTC minute hand, UTC hour hand and 24 hour hand to indicate that the all-reset procedure is finish[...]

[Insufficient Charging Warning Function] (Analog Display) Regardless of the display (Mode) of the watch at the time, when the watch becomes insufficiently charged, the watch changes to the time display and the second hand begins to move at two-second-interval movement. Although the 24-hour hand, hour hand and minute hand continue to keep the correc[...]

[Time Setting Warning Function] (Analog Display) The watch stops when insufficient charging continues for about 1.5 days. When the watch is charged by exposing to light after having stopped due to insufficient charging, each hand is rapidly advanced to the base position and stops. Each hand remains stopped until the time is reset. (Digital Display)[...]

When power is not generated as a result of the solar cell not being exposed to light, the second hand stops when it reaches the zero seconds position and the watch automatically enters the power save state to inhibit power consumption of the secondary battery. (Analog Display) • The second hand stops at the base position (12:00). • Other hands [...]

[Manual Power Save] When not using the watch for an extended period of time, activating the manual power save function after first charging the watch until all three bars of the graphic disp lay of the secondary battery charge indicator are lit enables the watch to be stored for a longer period of time. Furthermore, do not charge the watch while th[...]

The time required for recharging varies according to the model of the watch (color of the dial, etc). The following times are shown below to serve only as a reference. Recharging time refers to the amount of time the watch is continuously exposed to light. Charging Time Full recharging time: Time required for recharging the watch from the stopped s[...]

20. Using the Register Ring NOTE: The bezel design may vary depending on the model. [Calculation function] A. Navigational Calculation 1. Time required Example: Obtain the time required for the fight of an aircraft at 180 knots for 450 nautical miles. Answer. Align'18’ on the outer scale with the SPEEDINDEX / on the inner scale. Then, "[...]

scale (time scale), Thus, the estimated flight time is 2 hours and 30 minutes. 7. Difference in altitude The difference in altitude can be obtained from the rate of descent and the descent time. Example: Obtain the difference in altitude when an aircraft continues descending for 23 minutes at a rate of 250 feet per minute. Answer. Align"25&quo[...]

3) Proportion Example: 30/20 = 60/x Operation: Align "30" on the outer scale with ‘20’ on the inner scale, Then, ‘60’ on the outer scale corresponds to ‘40’ on the inner scale. At this point, the proportion for every value on the inner and outer scales is 30:20. 4) Square root Example: Square root of 225 Operation: Turn the ou[...]

Marking Marking Water -resistant on the Dial on the characteristics Caseback Face washing, Swimming Skin diving Scuba diving splashes, (diving (diving with sweat, without air tanks) raindrops, etc. air tanks) Non water -resistant NONE NONE NO NO NO NO watch and must be kept away from water . An ordinary water -resistant NONE WA TER OK NO NO NO watc[...]

Water Resistance The water-resistant quality of our timepieces is offered in varying degrees depending on the model. This ranges from non-water resistant models to those suitable for SCUBA diving. Water resistance of our timepieces is measured in BAR or Barometric Pressure. Each BAR of pressure is equal to 14.5 pounds per square inch of pressure. W[...]