CompuSTAR Pro system manuale d’uso

1 WWW.COMPUSTAR.COM This device complies w ith Part 15 of the FCC rules. Opera tion is subject to the following conditions; (1) This device may not cause harmful interference. (2) This device may accept any interference received, including interference tha t ma y cause undesired operation. CAUT ION: Changes or modifications not expre ssly approved [...]

T able of Content s Introduction ............................................................................................................................... ................ 3 Kit(s) Contents ............................................................................................................................... ........... 3 Warranty Cov[...]

Introduction Introduction Thank you for purchasing a CompuStar Pro system for your vehicle. In order to truly enjoy the benefits of this system, we recommend that you fully review the following manual. Please note that this manual applies to all PRO 2-Way LED (Light Emitting Diode) systems, regardless of whether you purchased the alarm only, starte[...]

Remote Reference Remote Reference P2WSHLEDR (2-Way Super Heterodyne) Applicable to the following models; - P2WSHLED-AS (alarm and remote start) - P2WSHLED-A (alarm w/out remote start) - P2WSHLED-S (remote start w/out alarm) P1WSHR (Fiancé 1-Wa y Super Heterodyne) (Canada Style) 4[...]

Quick Reference Quick Reference Valet Mode Valet Mode When servicing or loaning your vehicle to others, the CompuStar Pro system should be in Valet mode. Valet mode prevents the system from remote starting and disables all alarm functions. IMPORTANT: While in Valet mode the CompuStar will st i ll lock and unlock power lock systems. The system can b[...]

2 Way LED and 1 Way Remote Button Func tions Button Duration Additional Programming Required Function / Description 0.5 seconds no Lock/Arm 3.5 seconds no 0.5 seconds no Unlock/Disarm 0.5 seconds no Aux 1. Triggers the auxiliary 1 output (most commonly used for rear defrost or window roll-down). 2.5 seconds no Trunk pop. Triggers the trunk release [...]

Remote LED Diagram and Icons Remote LED Diagram and Icons Your remote pager will indicate the status of your vehicle while in range through a series of flash ing LEDs. The unique LED design will visually display such icons as lock/unlock status, re mote start confirmation and all the icons to show your vehicle is running, impact/shock notification [...]

pager is in range to receive commands, hold buttons for 2.5 seconds – if the pager LEDs illuminate and beep, the pager is in range to receive commands. Active Lock/Arm and Unlock/Disarm Tap button for 0.5 seconds to lock/arm and unlock/disarm. The icon will flash on your remote. If your vehicle is locked, tap button to unlock; if your vehicle is [...]

• The transmission must be left in the neutral position. • The vehicles windows must be rolled up. • The vehicles door pins must be in working order. • Do not install this remote start on a manual transmission vehicle that has a convertible or removable top. • Do not set reservation mode or remote start with people in the vehicle. Activat[...]

outputs up accordingly. Using auxiliary outputs to control additional vehi cle functions will require additional parts and can be rather labor extensive. Tap button for 0.5 seconds to trigger auxiliary output 1. Tap button for 0.5 seconds to trigger auxiliary output 2. The remote will beep once and the or icon will illuminate indicating that the au[...]

Default 1: Off Option 2: Locks the doors when the ignition is on and after the brake is depressed. Option 3: locks the doors when the RPM’s have reached two times that of idle speed (this setting requires that a tachometer wire is connected). With both settings, the doors will unlock when the ignition is turned off. If using this feature on a man[...]

STEP 7: Turn the ignition OFF - the RPS disarm/unlock feature is now programmed. Follow steps 3 – 5 to enter your disarm/unlock code. Secure Valet Switch The optional Secure Valet Switch prevents the alarm from being put into valet mode through cycling the ignition on/off five times. The Secure Valet Switch is more secure than traditional toggle [...]

Cold/Hot Start Mode Cold/hot start mode works in conjunction with time r start mode (see above) and the temperature sensor. It allows you to configure your timer start feature to c heck the vehicles temperature prior to starting. All of these options require programming from your local CompuStar dealer. Cold Start Settings (Option 2-8); Hot Start S[...]

Remote S t art Error Diagnostic gnostic If the remote start fails to start the vehicle, the parking lights will flash thr ee times immediately. Following those three flashes the parking lights will flash again correspo nding to the error table. If the remote start fails to start the vehicle, the parking lights will flash thr ee times immediately. F[...]

Limited Lifetime W arranty Firstech, LLC Warrants to the original purchaser that this product shall b e free of defects in material and workmanship under normal use and circumstances for the period of time that the original owner of this product owns the vehicle in which it is installed; except that the remote controller unit for the perio d of one[...]

Notes: ___________________________________________________________________________________ ___________________________________________________________________________________ ___________________________________________________________________________________ ___________________________________________________________________________________ _______[...]

___________________________________________________________________________________ ___________________________________________________________________________________ ___________________________________________________________________________________ ___________________________________________________________________________________ ______________[...]

www.compustar.com Toll Free: 888-820-3690 21911 68 th Ave S Kent, WA 98032 18[...]