Dacor MORD230 manuale d’uso

Installa tion Instr uc tion s R en a i ssance W all O v en Models: EOR, MOR Part No. 102579 Rev . G[...]

All specifications are subject to change without notice. Dacor ® assumes no liability for changes to specifications. © 2007 Dacor , all rights reserved.[...]

1 Installation Specifications ................................................ 6 Installation Planning ......................................................... 6 Installation Instructions .................................................... 8 V erify the Package Contents ............................................ 8 Remove the oven door(s) ......[...]

2 Impor tant Safety Instructions Read the accompanying use and care manual 1. before operating this appliance. Keep packaging materials away from children. 2. Plastic sheets and bags can cause suffocation. If you receive a damaged product, immediately con- 3. tact your deale r or builder . Do not install or use a damaged appliance. Do not install o[...]

3 Customer Ser vice Information A MODEL: EOR = Epicure Renaissance MOR = Millennia Renaissance B NUMBER OF CONVECTION OVENS: S = Single D = Double C NUMBER OF OVENS: 1 = Single 2 = Double D WIDTH: 27 = 27 Inch 30 = 30 Inch 36 = 36 Inch E TRIM: SCH = Stainless Steel with Chrome Trim B = Black Handle, Black Trim BK = Black Handle, Stainless Trim S = [...]

4 Power Supply Requirements It is the owner ’s responsibility to ensure that a licensed • electrician performs the installation of the electrical sup- ply for this appliance. The electrical installation, includ- ing minimum supply wire size, must comply with the National Electric Code ANSI/NFP A 70 (latest revision) and local codes and ordin[...]

5 C J B H G F A Chassis Notch Side View Control Panel Front T op of Chassis T op of Chassis Conduit: 60” (152 cm) Long K L M E D C J B H G F A K L M E Chassis Notch Side View Control Panel Front T op of Chassis T op of Chassis Conduit: 60” (152 cm) Long D * Design Specifications 3 3/8” (8.6 cm) 1” (2.5 cm) 1” (2.5 cm) Product Dimensions A[...]

6 Installation Specifications Installation Planning W ARNING Observe all governing codes and ordinances during plan- ning and installation. Contact your local building depart- ment for further information. IMPORT ANT Locate the junction box so that the oven may be easily • disconnected in the event that it needs to be removed from the wall com[...]

7 Installation Specifications 4” T ypical T oe Kick Recommended Electrical Location N P R 3/4” (1.9 cm) Support Platform 1” (2.5 cm) min. to bottom of cabinet door 1” (2.5 cm) min. to top of drawer face 9 5/8” (24.4 cm) Recommended Recommended Electrical Location Alternate Electrical Location 4” T ypical T oe Kick N P R 3/4” (1.9 cm) [...]

8 Installation Instructions V erify the Package Contents V erify that all the components below have been provided. If any item is missing or damaged, please contact your dealer immediately . Do not install a damaged or incomplete appliance. Make sure that you have everything necessary to ensure proper installation before proceeding. Exhaust grill w[...]

9 Installation Instructions W ARNING If the electrical service provided does not meet the • Product Specifications (see page 4), do not proceed with the installation. Call a licensed electrician to cor- rectly install the required wiring. Failure to disconnect power prior to installation may • result in an electrical shock or fire hazard.[...]

10 Installation Instructions Connecting to a Four W ire Electrical System Separate the wires coming out of the appliance conduit. 1. Connect the white wire from the appliance conduit to the 2. white (neutral) supply wire in the junction box. Connect the black wire from the appliance conduit to the 3. black (L1) supply wire in the junction box. Conn[...]

11 Installation Instructions Clamps Bare metal Insulating device 4 A WG wire (minimum) Three Wire Connection with External Ground Conduit to oven Incoming Power Wire Nut, 4 Places Junction Box Separate 10 AWG Wire Minimum Clamp wire tightly to pipe Connecting to a Three W ire Electrical System with Exter nal Ground - Where Local Codes Permit W ARNI[...]

12 Installation Instructions Installing the Oven in the Cabinet W ARNING Failure to properly install the mounting screws may • result in movement or tipping of the oven during use resulting in personal injury . Do not block the oven air exhaust located at the bot- • tom of the oven. Blocking the intake may result in a fire hazard, cabinet[...]

13 Reinstalling the Oven Doors W ARNING Failure to fully rotate the hinge catches will result in a safety hazard and may cause personal injury due to the door falling off its hinges. Also damage to the oven and/or improper door alignment may occur . CAUTION On double ovens, install the top door first to reduce the chance of damaging the lower door [...]

14 Installation Instructions V erifying Proper Operation For stainless steel ovens, peel off the protective layer of 1. plastic that covers the stainless steel surfaces. Remove any packaging from inside the oven(s). 2. Slide the oven racks onto the supports inside the oven 3. chamber(s) according to the use and care manual. T urn on power to the ov[...]

15 Installation Instructions Installation Checklist W ARNING T o ensure proper installation, the installer must complete the checklist below to make sure that no part of the in- stallation has been overlooked. Is the oven mount on a level platform? □ Is the oven wired and grounded according to these □ instructions and in accordance with all app[...]

16 Notes[...]

[...]

Dacor ● 1440 Bridge Gate Drive, Diamond Bar , CA 91765 ● T el: (800) 793-0093 ● F AX: (626) 403-3130 ● www .Dacor.com[...]