Daewoo DTQ 27U8SC manuale d’uso

INSTRUCTION MANUAL Color T elevision DTQ 27U8SC[...]

CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerou[...]

Important Safeguards SAFETY IMPORT ANT SAFEGUARDS PLEASE READ ALL THESE INSTRUCTIONS REGARDING YOUR TELEVISION EQUIPMENT AND RETAIN FOR FUTURE REFERENCE. FOLLOW ALL WARNINGS AND INSTRUCTIONS MARKED ON THE TV RECEIVER. 1 Read all of these instructions. 2 Save these instructions for later use. 3 Unplug this television equipment from the wall outlet b[...]

Important Safeguards 13 An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits, as contact with[...]

Daewoo Electronics Corporation of America 120 Chubb Avenue, Lyndhurst, NJ 07071 1-800-DAEWOO8 (1-800-323-9668) Fax:201-935-5284 Dear Customer : Daewoo Electronics Corporation of America would like to thank you for choosing this color television receiver. It incorporates a host of features designed to give you excellent performance for many years to[...]

CONTENTS 1 Table of Contents T able of Contents Chapter 1: Overview of Your Equipment 2 Your TV's Front Panel 2 Your TV's Back Panel 3 Your Remote Control 4 Installing your remote control batteries 5 Notes 5 Chapter 2: Connecting an Antenna or Cable to Your TV 6 Connecting an Antenna 6 Connecting a Cable System 7 Connecting Other Pieces o[...]

Overview of Y our Equipment Your TV comes with a remote control. The section below summarizes the buttons, controls, and terminals that you will use with your TV. Your TV's Front Panel 1 POWER Use this button to turn your TV on or off. 2 VIDEO IN jack Use this jack to receive a video signal from another A/V component. 3 AUDIO IN jack This rece[...]

Your TV's Back Panel 1 Antenna terminal(ANT) Use this terminal to attach an antenna or cable system to your TV. 2 VIDEO OUT This terminal allows the TV to send a video signal to another component, such as a VCR. 3 AUDIO OUT This terminal allows the TV to send an audio signal to another component, such as a VCR. 4 VIDEO IN This terminal allows [...]

4 Chapter 1 : Overview of Your Equipment Your Remote Control 1. POWER Use this button to turn your TV on or off. 2. MUTE Use to turn the TV’s sound on and off. 3. W CH V Use these buttons to change channels on your TV, or select items in the menu system. 4. C VOL B Use these buttons to change your TV's volume, to activate selections in the m[...]

5 Chapter 1 : Overview of Your Equipment Installing your remote control batteries 1 Open the battery compartment on the back of the remote control. 2 Install two AA-size batteries (not included) as shown. Make sure the “+” and “-” terminals are oriented correctly. 3 Replace the cover. Notes Do not mix different types of batteries, or mix an[...]

6 CHAPTER 2 Chapter 2 : Connecting an Antenna or Cable to Your TV Connecting an Antenna or Cable to Y our TV Your TV will provide you with the best performance if you connect it to an external antenna or cable system. Follow the directions below make this connection. Please note that you will normally only have to make one of the connections shown [...]

7 Chapter 2 : Connecting an Antenna or Cable to Your TV Antennas with two sets of leads You might have two sets of leads from your antenna system, especially if you have one antenna for VHF signals and one antenna for UHF signals. If your antenna system has both a coaxial lead and twin 300-ohm leads , you must obtain a combiner (available at your l[...]

8 Chapter 2 : Connecting an Antenna or Cable to Your TV If your cable system requires you to use a converter box for all channels, connect the incoming cable to the IN terminal on the converter box. Connect another cable between the OUT terminal on the converter box and the antenna terminal on the TV. You will need to keep your TV tuned to channel [...]

Operating Y our TV Once you have connected your TV to an antenna or cable system, plugged the TV in, and put batteries in the remote, you are ready to use the TV. The first thing you should do is to program your TV so it memorizes all of available channels. Turning Your TV On 1 To turn your TV on, press the POWER button on the remote control. You c[...]

Changing Channels You can change channels in three ways: 1 The W CH V buttons will take you through all memorized channels, one by one. The W CH V buttons will not access channels that have not been programmed into the TV's memory. For more information about programming channels into memory, see the section “Programming your TV's Channe[...]

11 Chapter 3: Operating Your TV Changing the TV's Channel Memory Your TV's memory determines the channels that are available using the W CH V buttons. You can add channels to this memory or remove them from memory. If a channel is removed from memory, you can tune to it with the number buttons, but you cannot tune to it with the W CH V bu[...]

Changing the TV's Input Normally, your TV displays the signal coming through the antenna terminal. However, If you’ve connected another component to your TV(such as a VCR or DVD) using the Video/Audio/Y Cb Cr input, you will want to be able to view the signal from the component. To do this, you will need to switch from the ‘ TV ’ input t[...]

13 Chapter 3: Operating Your TV Adjusting Video Settings You may wish to adjust the video settings (e. g. contrast or color) to obtain the most pleasing picture. To do so, follow these directions: 1 With the TV on, press the MENU button. then “Video” menu will appear. 2 The “Settings” item will be selected. Use the C VOL B buttons to turn S[...]

14 Chapter 3: Operating Your TV Returning to the factory settings If you would like to return to the original video settings, as they were calibrated at the factory, follow these steps : 1 With the TV on, press the MENU button. then “Video” menu will appear. 2 Press the C VOL B buttons to set the “Settings” to ‘Preset’. The TV will reme[...]

15 Chapter 4: Using Timer Functions Using Timer Functions Your TV has a built in-clock, and you can set the TV to turn on and off at times that you select. You can also set your TV to turn off after counting down a certain amount of time. Setting the Clock 1 With the TV turned on, press the MENU button until “Time” menu will be displayed. 2 The[...]

16 Chapter 4: Using Timer Functions Setting the Off Time If you enter a time in the “Off Time” setting, your TV will automatically turn off at that time. Follow these instructions to set the “Off Time”. 1 With the TV turned on, press the MENU button until “Time” menu will be displayed. 2 Use the W CH V buttons to select “Off time” i[...]

17 Chapter 4: Using Timer Functions Setting the Sleep Timer The sleep timer allows you to set an amount of time from 15 minutes to 120 minutes. TV will count down the amount of time you set, then turn itself off. To set the sleep timer: 1 With the TV turned on, press the MENU button until “Time” menu will be displayed. 2 Use the W CH V buttons [...]

18 Chapter 5 : Additional Features Using the Special Features This section contains descriptions of the more advanced features of your TV. Changing the Language of the On-screen Menus You can choose to display the on-screen menus in English, Spanish, French. To change the on-screen language: 1 With the TV on, press the MENU button twice, then “Se[...]

19 Chapter 5 : Additional Features CC on Mute When the sound is muted, user can select the caption display. It will display the caption content instead of sound mute. 1 With the TV turned on, press the MENU button until “Special” menu will be displayed. 2 Use the W CH V buttons to select “CC on Mute” item. 3 Use the C VOL B buttons to selec[...]

20 Chapter 5 : Additional Features Dynamic Sound User can select On/Off status when the user wants dynamic sound. This function gives us dynamic and active feeling. 1 With the TV terned on, press the MENU button until “Special” menu will be dispalyed. 2 Use the W CH V buttons select “Dynamic Sound” item. 3 Use the C VOL B buttons to select [...]

21 Chapter 5 : Additional Features Closed Caption : Off CC on Mute : Off Power Restore : Off Dynamic Sound Off Ch Labels: To Press Parental Control Select Special Adjust Next 1 Closed Caption : Off CC on Mute : Off Power Restore : Off Dynamic Sound Off Ch Labels: To Press Parental Control Select Special Adjust Next 2 Closed Caption : Off CC on Mute[...]

22 Chapter 5 : Additional Features Parental Control Settings This item helps parents to set the standard for the programs which their children is going to watch. 1 With the TV on, press the MENU button until “Special” menu will appear. 2 Use the W CH V buttons to select “Parental Control” item. 3 Use the C VOL B buttons to enter into “Par[...]

23 Chapter 5 : Additional Features Description of Parental Control Settings 1 The TV Guidelines set the standard for TV programs excluding sports and news. Use the W CH V buttons to select, C VOL B buttons to adjust. You can set individual settings with C VOL B buttons. 2 The Movie Ratings set the standard for movie, video, and other media excludin[...]

24 Chapter 5 : Additional Features No Ratings means 1 When V-chip data is error. 2 When any ratings are not deleted. 3 Received a rating of “None” like news, sports, and emergency broadcast signals. Mini Glossary MOVIE RATING SYSTEM TV PARENTAL GUIDELINE RATING SYSTEM X Hard Core Films Not for children under age 17 under any circumstance. Stron[...]

25 Chapter 6 : Adjusting the Sound CHAPTER 6 Adjusting the Sound Selecting stereo/SAP The MTS(Multi-channel TV Sound) provides for an extra sound channel. So MTS feature allows you to improve your TV viewing with high fidelity stereo sound. SAP(Second Audio Program) used to transmit a second language of other audio information. If your TV receives [...]

26 Chapter 6 : Adjusting the Sound Setting “SURROUND” function You can hear surround sound when stereo broadcasting is receiving or external input sound is stereo. 1 With the TV turned on, press the MENU button until “SOUND” menu will be displayed. 2 Use the V V CH W W buttons select “SURROUND” item. 3 Use the C VOL B buttons turn on/of[...]

27 Troubleshooting T roubleshooting Your Daewoo television is designed to give you trouble-free performance for many years. If you have a problem with your TV, try the solutions listed below. If the suggestions listed below do not solve your problem, contact your Daewoo dealer or an authorized Daewoo service center. There is no picture or sound, or[...]

28 SAFETY Warranty W arranty Daewoo Electronics Corporation of America warrants each new electronic product manufactured by it to be free from defective material and workmanship and agrees to remedy any such defect or to furnish a new part (at the Company’s option) in exchange for any part of any unit of its manufacture which under normal install[...]

This instrument is listed by Underwriter’s Laboratories, Inc. It is designed and manufactured to meet rigid U.L. safety standards against X-radiation, fire, casualty and electrical hazards. Daewoo Electronics Corporation of America 120 Chubb Avenue Lyndhurst, NJ 07071 For more information about this or other Daewoo products, please call 1-800-DAE[...]