Dell E6320 manuale d’uso

Dell Latitude E6320 Owner's Manual Regulatory Model: P12S Regulatory Type: P12S001[...]

Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2012 Dell Inc[...]

Contents Notes, Cautions, and Warnings ..................................................................2 บทที่ 1: การทำงานกับสวนประกอบภายในของคอมพิวเตอร ..................................................9 การดำเนินการกับส[...]

Installing The Optical Drive ............................................................................................. 28 บทที่ 8: Base Cover ........................................................................................ 31 Removing The Base Cover ..............................................................................[...]

Removing The Bluetooth Card .........................................................................................57 Installing The Bluetooth Card .......................................................................................... 58 บทที่ 17: แผง LED ........................................................................[...]

บทที่ 25: ลำโพง ................................................................................................... 95 Removing The Speakers ..................................................................................................95 Installing The Speakers ................................................................[...]

Virtualization Support ............................................................................................. 129 Wireless .................................................................................................................. 129 Maintenance .........................................................................................[...]

8[...]

1 การทำงานกับสวนประกอบภายในของคอมพิวเตอร การดำเนินการกับสวนประกอบภายในคอมพิวเตอร ปฏิบัติตามคำแนะนำตอไปนี้เพื่อปกป?[...]

ขอควรระวัง : ปลดสายเครือขายโดยถอดสายออกจากคอมพิวเตอรกอน แลวจึงถอดสายจากอุปกรณเครือขาย 4. ถอดสายโทรศัพทหรือสายเครือ[...]

– สำหรับ Windows XP: คลิก Start → Turn Off Computer → Turn Off คอมพิวเตอรจะปดทำงานหลังจากระบบปฏิบัติ การปดการทำงานเสร็จสิ้น 2. ตรวจสอบวาคอมพิวเตอรแล?[...]

12[...]

2 ExpressCard Removing The ExpressCard 1. Follow the procedures in Before Working On Your Computer . 2. Press in on the ExpressCard to release it from the computer. 3. Slide the ExpressCard out of the computer. 13[...]

Related Links Installing the ExpressCard Installing the ExpressCard 1. Slide the ExpressCard into its slot until it clicks into place. 2. Follow the procedures in After working inside your computer . Related Links Removing The ExpressCard 14[...]

3 การด SD Removing The Secure Digital (SD) Card 1. Follow the procedures in Before Working On Your Computer . 2. Press in on the SD card to release it from the computer. 3. Slide the SD card out of the computer. 15[...]

Related Links Installing the Secure Digital (SD) Card Installing the Secure Digital (SD) Card 1. Slide the Secure Digital (SD) card into its slot until it clicks into place. 2. Follow the procedures in After working inside your computer . Related Links Removing The Secure Digital (SD) Card 16[...]

4 แบตเตอรี่ Removing The Battery 1. Follow the procedures in Before Working On Your Computer . 2. Slide the battery latches to unlock the battery. 3. Slide the battery out and remove it from the computer. 17[...]

Related Links Installing The Battery Installing The Battery 1. Slide the battery into its slot until it clicks into place. 2. Follow the procedures in After working inside your computer . Related Links Removing The Battery 18[...]

5 Subscriber Identity Module (SIM) Card Removing The Subscriber Identity Module (SIM) Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Press in on the SIM card to release it from the computer. 4. Slide the SIM card out from the computer. 19[...]

Related Links Installing the Subscriber Identity Module (SIM) Card Installing the Subscriber Identity Module (SIM) Card 1. Slide the SIM card into its compartment. 2. Install the battery . 3. Follow the procedures in After Working Inside Your Computer . Related Links Removing The Subscriber Identity Module (SIM) Card 20[...]

6 ฮารดไดรฟ Removing The Hard Drive 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the screws that secure the hard drive to the computer. 4. Slide and remove the hard drive out of the computer. 21[...]

5. Remove the screw that secures the hard-drive caddy to the hard drive. 6. Pull and remove the hard-drive caddy away from the hard drive. 22[...]

Related Links Installing The Hard Drive Installing The Hard Drive 1. Attach the hard-drive caddy to the hard drive. 2. Tighten the screws to secure the hard-drive caddy to the hard drive. 3. Slide the hard drive into the computer. 4. Replace and tighten the screws that secure the hard drive to the computer. 5. Install the battery . 6. Follow the pr[...]

24[...]

7 ออพติคอลไดรฟ Removing The Optical Drive 1. Follow the procedures in Before Working On Your Computer . 2. Press and release the optical drive latch. 3. Pull the optical drive out of the computer. 4. Pull the optical drive door from one side to release it. 25[...]

5. Pull the other side of the optical drive door to release it completely from the optical drive. 6. Remove the screw that secures the drive latch to the optical drive. 26[...]

7. Remove the drive latch from the optical drive. 8. Remove the screws that secures the drive latch bracket to the optical drive. 27[...]

9. Remove the drive latch bracket from the optical drive. Related Links Installing The Optical Drive Installing The Optical Drive 1. Insert the drive latch bracket into the optical drive. 2. Tighten the screws to secure the drive latch bracket to the optical drive. 3. Insert the drive latch into the optical drive. 4. Tighten the screw to secure the[...]

Removing The Optical Drive 29[...]

30[...]

8 Base Cover Removing The Base Cover 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) Card . 4. Remove the screws that secure the base cover to the computer. 5. Lift the base cover up and away from the computer. 31[...]

Related Links Installing The Base Cover Installing The Base Cover 1. Place the base cover to align the screw holes correctly with the computer. 2. Replace and tighten the screws to secure the base cover to the computer. 3. Install the Secure Digital (SD) Card . 4. Follow the procedures in After Working Inside Your Computer . Related Links Removing [...]

9 เมมโมรี่การด Removing The Memory 1. Follow the procedures in Before Working On Your Computer 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the base cover . 5. Pry the retention clips away from the memory module until it pops up. 6. Remove the memory module from the computer. 33[...]

Related Links Installing The Memory Installing The Memory 1. Insert the memory module into the memory slot. 2. Press the clips to secure the memory module to the system board. 3. Install the base cover . 4. Install the Secure Digital (SD) card . 5. Install the battery 6. Follow the procedures in After Working Inside Your Computer . Related Links Re[...]

10 ถานกระดุม Removing The Coin-Cell Battery 1. Follow the procedures in Before Working on Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the base cover . 5. Disconnect the coin-cell battery cable from the system board. 6. Release and remove the coin-cell battery from the computer. 35[...]

Related Links Installing The Coin-Cell Battery Installing The Coin-Cell Battery 1. Place the coin-cell battery in its location. 2. Connect the coin-cell battery cable to the system board. 3. Install the base cover . 4. Install the Secure Digital (SD) card . 5. Install the battery 6. Follow the procedures in After working inside your computer . Rela[...]

11 การดเครือขายภายในไรสาย (WLAN) Removing The Wireless Local Area Network (WLAN) Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the base cover . 5. Disconnect the antenna cables from the WLAN card. 6. R[...]

7. Remove the WLAN card from its slot on the system board. Related Links Installing The Wireless Local Area Network (WLAN) Card Installing The Wireless Local Area Network (WLAN) Card 1. Insert the WLAN card into its connector at a 45–degree angle. 2. Replace and tighten the screw that secures the WLAN card to the computer. 3. Connect the antenna [...]

5. Install the Secure Digital (SD) card . 6. Install the battery 7. Follow the procedures in After Working Inside Your Computer . Related Links Removing The Wireless Local Area Network (WLAN) Card 39[...]

40[...]

12 การดเครือขายวงกวางไรสาย (WWAN) Removing The Wireless Wide Area Network (WWAN) Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the base cover . 5. Disconnect the antenna cables from the WWAN card.[...]

7. Remove the WWAN card from the computer. Related Links Installing The Wireless Wide Area Network (WWAN) Card Installing The Wireless Wide Area Network (WWAN) Card 1. Insert the WWAN card into its connector at a 45–degree angle. 2. Replace and tighten the screw to secure the WWAN card to the computer. 3. Connect the antenna cables according to t[...]

5. Install the Secure Digital (SD) card . 6. Install the battery 7. Follow the procedures in After Working Inside Your Computer . Related Links Removing The Wireless Wide Area Network (WWAN) Card 43[...]

44[...]

13 Keyboard Trim Removing The Keyboard Trim 1. Follow the procedures in Before Working On Your Computer . 2. Using a plastic scribe, pry under the keyboard trim to release it from the computer. 3. Lift the keyboard trim to release the tabs and remove it from the computer. 45[...]

Related Links Installing The Keyboard Trim Installing The Keyboard Trim 1. Align the keyboard trim with the keyboard and snap it into place. 2. Follow the procedures in After Working Inside Your Computer . Related Links Removing The Keyboard Trim 46[...]

14 แปนพิมพ Removing The Keyboard 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the keyboard trim . 4. Remove the screws that secure the keyboard to the computer. 5. Remove the screws that secure the keyboard to the palmrest assembly. 47[...]

6. Flip the keyboard over and lay it toward the display. 7. Lift the clip to release the keyboard cable and disconnect it from the computer. 48[...]

8. Remove the keyboard from the computer. 9. Remove the tape securing the keyboard cable from the keyboard. 49[...]

10. Disconnect and remove the keyboard cable from the keyboard. Related Links Installing The Keyboard Installing The Keyboard 1. Connect the keyboard cable and secure it to the keyboard using the tape. 2. Connect the keyboard cable to its connector on the system board. 3. Turn the keyboard over and lay it on the palmrest. 4. Replace and tighten the[...]

6. Install the battery . 7. Install the keyboard trim 8. Follow the procedures in After Working Inside Your Computer . Related Links Removing The Keyboard 51[...]

52[...]

15 ที่พักมือ Removing The Palmrest Assembly 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the keyboard trim . 9. Remove the keybo[...]

– bluetooth – contactless smart card reader – ExpressCard – fingerprint reader 12. Remove the screws to release the palmrest assembly from the system board. 13. Lift the palmrest assembly along the edges to unlock the tabs and remove it away from the computer. 54[...]

Related Links Installing The Palmrest Assembly Installing The Palmrest Assembly 1. Align the palmrest assembly with the computer and snap it into place. 2. Replace and tighten the screws to secure the palmrest assembly to the system board. 3. Connect the following cables to the system board: – LED board – touchpad – bluetooth – contactless [...]

Related Links Removing The Palmrest Assembly 56[...]

16 การด Bluetooth Removing The Bluetooth Card 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the keyboard trim . 9. Remove the keyboard .[...]

13. Release and remove the bluetooth cable from the bluetooth card. Related Links Installing The Bluetooth Card Installing The Bluetooth Card 1. Connect the bluetooth cable to the bluetooth card. 2. Place the bluetooth card on the palmrest assembly. 3. Replace and tighten the screw to secure the bluetooth card to the palmrest assembly. 4. Install t[...]

9. Install the base cover . 10. Install the optical drive . 11. Install the Secure Digital (SD) card . 12. Install the battery . 13. Follow the procedures in After Working Inside Your Computer . Related Links Removing The Bluetooth Card 59[...]

60[...]

17 แผง LED Removing The LED Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the keyboard trim . 9. Remove the keyboard . 10. Remove the p[...]

13. Remove the LED board from the palm rest assembly. Related Links Installing The LED Board Installing The LED Board 1. Align the LED board on the palmrest. 2. Replace and tighten the screw that secure the LED board to the palmrest. 3. Route the LED board cable to its original position. 62[...]

4. Install the palmrest assembly . 5. Install the keyboard . 6. Install the keyboard trim . 7. Install the hard drive . 8. Install the ExpressCard . 9. Install the base cover . 10. Install the optical drive . 11. Install the Secure Digital (SD) card . 12. Install the battery . 13. Follow the procedures in After Working Inside Your Computer . Relate[...]

64[...]

18 Smart Card Reader Removing The Smart Card Reader 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the keyboard trim . 9. Remove the keyboard . 10. [...]

13. Lift and remove the smart card reader from the computer. Related Links Installing The Smart Card Reader Installing The Smart Card Reader 1. Place the smart card reader to its original position on the computer. 2. Replace and tighten the screws to secure the smart card reader to the computer. 3. Connect the smart card reader cable to the system [...]

8. Install the hard drive . 9. Install the ExpressCard . 10. Install the base cover . 11. Install the optical drive . 12. Install the Secure Digital (SD) card . 13. Install the battery . 14. Follow the procedures in After Working Inside Your Computer . Related Links Removing The Smart Card Reader 67[...]

68[...]

19 Media Board Removing The Media Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the keyboard trim . 9. Remove the keyboard . 10. Remove the p[...]

13. Remove the media board from the computer. Related Links Installing The Media Board Installing The Media Board 1. Align the media board to its original position on the computer. 2. Replace and tighten the screws to secure the media board to the computer. 3. Connect the media board cable to the system board. 4. Install the palmrest assembly . 5. [...]

8. Install the ExpressCard . 9. Install the base cover . 10. Install the optical drive . 11. Install the Secure Digital (SD) card . 12. Install the battery . 13. Follow the procedures in After Working Inside Your Computer . Related Links Removing The Media Board 71[...]

72[...]

20 Display Hinges Removing The Display Hinge Covers 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the keyboard trim . 9. Remove the keyboard . 10. [...]

Related Links Installing The Display Hinge Covers Installing The Display Hinge Covers 1. Place the display hinges in the appropriate positions. 2. Replace and tighten the screws to secure the display hinge covers to the computer. 3. Install the palmrest assembly . 4. Install the keyboard . 5. Install the keyboard trim . 6. Install the hard drive . [...]

21 ชุดจอแสดงผล Removing The Display Assembly 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the base cover . 6. Remove the ExpressCard . 7. Remove the hard drive . 8. Remove the keyboard trim . 9. Remove the [...]

13. Remove the screws that secure the display assembly to the computer. 14. Pull out the antenna cables from their routing channels? 15. Remove the screws that secure the display cable bracket to the system board. 76[...]

16. Remove the display cable bracket from the computer. 17. Pull the display cable to disconnect it from the system board. 77[...]

18. Remove the screw that secures the display assembly to the computer. 19. Remove the display assembly from the computer. Related Links Installing The Display Assembly Installing The Display Assembly 1. Align the display assembly into its original position on the computer. 2. Replace and tighten the screw to secure the display assembly to the comp[...]

5. Replace and tighten the screws to secure the display cable bracket to the system board. 6. Route the antenna cables through the system board. 7. Replace and tighten the screws to secure the display panel to the computer. 8. Route the antenna cables to their original position. 9. Install the display hinge covers . 10. Install the palmrest assembl[...]

80[...]

22 เมนบอรด Removing The System Board 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the subscriber identity module (SIM) card . 6. Remove the base cover . 7. Remove the ExpressCard . 8. Remove the hard drive . 9. [...]

19. Remove the screws that secure the system board to the computer. 20. Lift the system board to locate the power supply cable. 82[...]

21. Disconnect the power supply cable from the system board. 22. Lift and remove the system board from the computer. 83[...]

NOTE: Steps 23 and 24 are applicable for computers that shipped in the United States of America. 23. Flip the system over and remove the screw that secures the TAA board. 24. Remove the TAA board from the system. 84[...]

Related Links Installing The System Board Installing The System Board 1. Place the TAA board to its original position. NOTE: Steps 1 and 2 are applicable for computers that shipped in the United States of America. 2. Replace and tighten the screw to secure the TAA board to the computer. 3. Align the system board into its original position on the co[...]

17. Install the battery . 18. Follow the procedures in After Working Inside Your Computer . Related Links Removing The System Board 86[...]

23 ฮีทซิงค Removing The Heat-Sink Assembly 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the subscriber identity module (SIM) card . 6. Remove the base cover . 7. Remove the ExpressCard . 8. Remove the hard drive[...]

20. Loosen the screws that secure the heat-sink assembly to the system board. 21. Remove the heat-sink assembly from the system board. 88[...]

Related Links Installing The Heat-Sink Assembly Installing The Heat-Sink Assembly 1. Align the heat-sink assembly to its original position on the system board. 2. Tighten the screws to secure the heat-sink assembly to the system board. 3. Connect the heat-sink cable to the system board. 4. Install the heat-sink assembly . 5. Install the display ass[...]

90[...]

24 แผง I/O Removing The Input/Output Panel 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the subscriber identity module (SIM) card . 6. Remove the base cover . 7. Remove the ExpressCard . 8. Remove the hard drive . 9. Remov[...]

19. Remove the I/O panel from the computer. Related Links Installing The Input/Output Panel Installing The Input/Output Panel 1. Replace the I/O panel in the computer 2. Tighten the screw securing the I/O panel to the computer. 3. Install the display assembly . 4. Install the display hinge covers . 5. Install the palmrest assembly . 92[...]

6. Install the keyboard . 7. Install the keyboard trim . 8. Install the hard drive . 9. Install the ExpressCard . 10. Install the base cover . 11. Install the optical drive . 12. Install the Secure Digital (SD) card . 13. Install the battery . 14. Follow the procedures in After Working Inside Your Computer . Related Links Removing The Input/Output [...]

94[...]

25 ลำโพง Removing The Speakers 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the base cover . 4. Remove the Secure Digital (SD) card . 5. Remove the optical drive . 6. Remove the subscriber identity module (SIM) card . 7. Remove the ExpressCard . 8. Remove the hard drive . 9. Remove the ke[...]

20. Remove the screws that secure the speakers to the computer. 21. Remove the speakers from the computer. 96[...]

Related Links Installing The Speakers Installing The Speakers 1. Replace the speakers to their original position in the computer. 2. Tighten the screws to secure the speakers to the computer. 3. Route and connect the speaker cable. 4. Install the system board 5. Install the display assembly . 6. Install the display hinge covers . 7. Install the pal[...]

98[...]

26 พอรต DC-In Removing The DC-In Port 1. Follow the procedures in Before Working on Your Computer . 2. Remove the battery . 3. Remove the Secure Digital (SD) card . 4. Remove the optical drive . 5. Remove the subscriber identity module (SIM) card . 6. Remove the base cover . 7. Remove the ExpressCard . 8. Remove the hard drive . 9. Remov[...]

20. Remove the DC-In bracket from the system. 21. Remove the DC-In port from the system. 100[...]

Related Links Installing The DC-In Port Installing The DC-In Port 1. Replace the DC-In port to its original position in the computer. 2. Replace the DC-In bracket to its original position in the computer. 3. Tighten the screw to secure the DC-In bracket to the computer. 4. Install the system board 5. Install the display assembly . 6. Install the di[...]

102[...]

27 กรอบจอแสดงผล Removing The Display Bezel 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Starting from the bottom, pry the bezel from inside the display assembly. 4. Remove the bezel from the display assembly. 103[...]

Related Links Installing The Display Bezel Installing The Display Bezel 1. Place the display bezel onto the display assembly. 2. Work along to the top and bottom edges of the display bezel. 3. Press the left and right edges of the display bezel. 4. Install the battery . 5. Follow the procedures in After Working Inside Your Computer . Related Links [...]

28 แผงจอแสดงผล Removing The Display Panel 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the display bezel 4. Remove the screws that secures the display panel to the display assembly. 5. Flip the display panel over. 105[...]

6. Disconnect the Low-Voltage Differential Signaling (LVDS) cable from the display panel. 7. Remove the display panel from the display assembly. 106[...]

Related Links Installing The Display Panel Installing The Display Panel 1. Align the display panel in its original position on the display assembly. 2. Connect the Low-Voltage Differential Signaling (LVDS) cable to the display panel. 3. Tighten the screws to secure the display panel to the display assembly. 4. Install the display bezel 5. Install t[...]

108[...]

29 กลอง Removing The Camera 1. Follow the procedures in Before Working On Your Computer . 2. Remove the battery . 3. Remove the display bezel . 4. Remove the display panel . 5. Disconnect the cable from the camera module. 6. Remove the screw that secures the camera and microphone to the display assembly. 109[...]

7. Remove the camera from the display assembly. Related Links Installing The Camera Installing The Camera 1. Place the camera module to its original position in the display assembly. 2. Tighten the screw to secure the camera to the display assembly. 3. Connect the camera cable to the camera. 4. Install the display panel . 5. Install the display bez[...]

Related Links Removing The Camera 111[...]

112[...]

30 รายละเอียดทางเทคนิค Technical Specifications NOTE: Offerings may vary by region. The following specifications are only those required by law to ship with your computer. For more information regarding the configuration of your computer, click Start → Help and Support and select the option to view informatio[...]

Memory Minimum memory 2 GB Maximum memory 8 GB Audio Type four-channel high definition audio Controller IDT 92HD90 Stereo conversion 24-bit (analog-to-digital and digital-to-analog) Interface: Internal high definition audio External microphone-in/stereo headphones/external speakers connector Speakers two Internal speaker amplifier 0.5 W (typical) p[...]

Ports and Connectors Network adapter one RJ-45 connector USB one 4-pin USB 2.0-compliant connector and one eSATA/USB 2.0-compliant connector Memory card reader one 5-in-1 memory card reader Contactless Smart Card Supported Smart Cards/ Technologies ISO14443A — 106 kbps, 212 kbps, 424 kbps, and 848 kbps ISO14443B — 106 kbps, 212 kbps, 424 kbps, [...]

Keyboard Number of keys United States: 86 keys, United Kingdom: 87 keys, Brazil: 87 keys, and Japan: 90 keys Layout QWERTY/AZERTY/Kanji Touchpad Active Area: X-axis 80.00 mm Y-axis 40.70 mm Battery Type • 3-cell (30Wh) lithium ion battery with ExpressCharge • 6-cell (60Wh) lithium ion battery with ExpressCharge • 6-cell (58Wh) lithium ion bat[...]

Battery 3-cell and 6-cell (60Wh) approximately 1 hour to 80% capacity and 2 hours to 100% capacity Voltage 11.10 VDC Temperature range: Operating 0 °C to 35 °C (32 °F to 95 °F) Non-Operating –40 °C to 65 °C (–40 °F to 149 °F) Coin-cell battery 3 V CR2032 lithium coin cell AC Adapter Type 65 W and 90 W Input voltage 100 VAC to 240 VAC In[...]

Environmental Temperature: Operating 0 °C to 35 °C (32 °F to 95 °F) Storage –40 °C to 65 °C (–40 °F to 149 °F) Relative humidity (maximum): Operating 10 % to 90 % (noncondensing) Storage 5 % to 95 % (noncondensing) Altitude (maximum): Operating –15.24 m to 3048 m (–50 ft to 10,000 ft) Non-Operating –15.24 m to 10,668 m (–50 ft t[...]

31 การตั้งคาระบบ Overview System Setup allows you to: • change the system configuration information after you add, change, or remove any hardware in your computer. • set or change a user-selectable option such as the user password. • read the current amount of memory or set the type of hard drive installed. Before[...]

General Option Description System Information This section lists the primary hardware features of your computer. • System Information • Memory Information • Processor Information • Device Information Battery Information Displays the battery status and the type of AC adapter connected to the computer. Boot Sequence Allows you to change the o[...]

System Configuration Option Description NOTE: System Configuration contains options and settings related to integrated system devices. Depending on your computer and installed devices, the items listed in this section may or may not appear. Integrated NIC Allows you to configure the integrated network controller. The options are: • Disabled • E[...]

Option Description Default Setting: COM1 SATA Operation Allows you to configure the internal SATA hard-drive controller. The options are: • Disabled • ATA • AHCI • RAID On Default Setting: RAID On NOTE: SATA is configured to support RAID mode. USB Controller Allows you to control the USB controller. The options are: • Enable USB Controlle[...]

Option Description Keyboard illumination Allows you to configure the keyboard illumination feature. The options are: • Disabled • Level is 25% • Level is 50% • Level is 50% • Levels is 100% Default Setting: Level is 25% Drives Allows you to configure the SATA drives on board. The options are: • SATA-0 • SATA-1 • SATA-4 • SATA-5 De[...]

Option Description NOTE: Deleting the admin password automatically deletes the system password and the hard drive password. NOTE: Successful password changes take effect immediately. Default Setting: Not set System Password Allows you to set, change or delete the system password. NOTE: Successful password changes take effect immediately. Default Se[...]

Option Description OROM Keyboard Access Allows you to set an option to enter the Option ROM Configuration screens using hotkeys during boot. The options are: • Enable • One Time Enable • Disable Default Setting: Enable TPM Security Allows you to enable the Trusted Platform Module (TPM) during POST. Default Setting: The option is disabled. Com[...]

Option Description Admin Setup Lockout Allows you to prevent users from entering Setup when an Administrator password is set. Default Setting: Enable Admin Setup Lockout is not selected. Performance Option Description Multi Core Support Allows you to enable or disable multi-core support for the processor. The options are: • All • 1 • 2 Defaul[...]

Power Management Option Description AC Behavior Allows you to enable or disable the computer from turning on automatically when an AC adapter is connected. Default Setting: Wake on AC is not selected. Auto On Time Allows you to set the time at which the computer must turn on automatically. The options are: • Disabled • Every Day • Weekdays De[...]

Option Description ExpressCharge Allows you to enable or disable the ExpressCharge feature. The options are: • Standard • ExpressCharge Default Setting: ExpressCharge POST Behavior Option Description Adapter Warnings Allows you to enable or disable the system setup (BIOS) warning messages when you use certain power adapters. Default Setting: En[...]

Option Description Fn Key Emulation Allows you to set the option where the <Scroll Lock> key is used to simulate the <Fn> key feature. Default Setting: Enable Fn Key Emulation is selected. POST HotKeys Allows you enable the sign-on screen message display indicating the keystroke sequence to access the System Setup option menu. Default S[...]

Option Description • WWAN • WLAB • Bluetooth Default Setting: All the options are selected. Wireless Device Enable Allows you to enable or disable the wireless devices Default Setting: All the options are selected. Maintenance Option Description Service Tag Displays the Service Tag of your computer. Asset Tag Displays the Asset Tag. SERR Mess[...]

32 การวินิจฉัยระบบ Device Status Lights Turns on when you turn on the computer and blinks when the computer is in a power management mode. Turns on when the computer reads or writes data. Turns on steadily or blinks to indicate battery charge status. Turns on when wireless networking is enabled. Battery Status Lights I[...]

Appearance Description Next Step Blinkin g Solid Solid Processor error Replace the system board. Solid Blinkin g Solid Memory is detected but has errors 1. Reseat the memory. 2. If two modules are installed remove one and test. Try the other module in the same slot and test. Test the other slot with both modules. 3. Replace the memory. 4. Replace t[...]

Appearance Description Next Step Off Blinkin g Blinkin g Modem error 1. Reseat the modem. 2. Replace the modem. 3. Replace the system board. 133[...]

134[...]

33 การติดตอกับ Dell การติดตอกับ Dell หมายเหตุ : หากไมสามารถเชื่อมตออินเทอรเน็ต สามารถคนหาขอมูลติดตอไดจากใบแจงหนี้ ใบกำกั[...]