Delta Electronics DOP-AE Series manuale d’uso

[...]

Revision Apr. 30th, 2007, 2007PDD23000002 i Preface Thank you very much for purchasing DELTA’s DOP-A Series, DOP -AE Series and DOP-AS series Human Machine Interface (hereinaf ter “H MI” ) products. This manual will be helpful in the installation, operat ion and specifications of Delta HMI produ ct and HMI Screen Editor software program ( her[...]

Preface | ScrEdit Softwa re User Manual ii Revision Apr. 30th, 2007, 2007PDD23000002 This page int entionally left blank.[...]

Revision Apr. 30th, 2007, 2007PDD23000002 Table of Contents Preface ........................................................................................................................ ................... i Chapter 1 Introduction ......................................................................................................... .. 1-1 1.1[...]

Table of Contents | ScrE dit Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 3.5 Pipe Element ............................................................................................................... ............... 3-24 3.6 Pie Element ............................................................................................[...]

Table of Contents | ScrE dit Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 Appendix B USB Flash Drive Function .................................................................................... B-1 Appendix C Main Menu Operation of HMI System .................................................................. C-1[...]

Table of Contents | ScrE dit Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 About this Manual… User Information Be sure to store this manual in a safe place. Due to constantly growing product rang e, technical im provement and alteration or change d texts, figures and diagrams, we reserve the right of this ma nual c ontained infor[...]

Revision Apr. 30th, 2007, 2007PDD23000002 1-1 Chapter 1 Introduction 1.1 DOP Series Human Machine Interface DOP series HMI are manufactured by adopting high -speed hardwa re to provide you with a powerful programmable interface. ScrEdit softwar e is a user -friendly program editor of DOP-A, DOP-AE and DOP-AS series HMI for Windows. Please refer to [...]

Chapter 1 Introduction | ScrEdit Software User M anual 1-2 Revision Apr. 30th, 2007, 2007PDD23000002  Support Multiple PLC’s Connections One DOP se ries HMI can connect to multiple cont rollers in seri al through COM2 of RS-485 port (NOTE 1) .  Simulation Function (NOTE 2) HMI ScrEdit software provides simulation feature which allows the us[...]

Chapter 1 Introduction | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 1-3 NOTE 1) The controller should provide RS-485 int erface. 2) Off-line/On-line simulation function s are only prov ided for some parts of the co ntrollers. Also, the execution time of on-line simulation only can c ontinue 30 minutes. After the simulat[...]

Chapter 1 Introduction | ScrEdit Software User M anual 1-4 Revision Apr. 30th, 2007, 2007PDD23000002 1.4 Caution  Operation Environment (temperature and humidity ) HMI should be operated in the following environ m ent parameters to adju st screen brightness and contrast to get the best image. If operating out of the range, LCD may be improp erly[...]

Revision Apr. 30th, 2007, 2007PDD23000002 2-1 Chapter 2 Creating and Editing Screens 2.1 ScrEdit (Screen Editor) Setup In this chapter, it will in troduce general functions of Screen Editor with Windows. The user can use it to design what he wants. Detail inform ation for each function will be discussed in following chapters.  Minimum System Req[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-2 Revision Apr. 30th, 2007, 2007PDD23000002 2. Step 2: Execute setup.exe from Windows ta skbar by clicking “Start” > “Run” . 3. After pressing OK , system will setup automatically and you will get the following dialog box to sele ct the desired display language (Fig[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-3 T o select a directory other t han the default directory , click Browse . A list of available directories appears. Highlight the desired direct ory for the Delta HMI ScrEdit and click OK , then Next> for the next step. If necessar[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-4 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.1.6 Finish installing ScrEdit 5. Step 5: After finish installing ScrEdit (Fig. 2.1.6), system will ask y ou to install HMI USB driver, please click Yes to install. Fig. 2.1.7 Install HMI USB driver 6. Step 6: After installing [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-5 2.2 How to St art ScrEdit 1. After setup, you can start ScrEdit by clicki ng Screen Editor 1.05.XX shortcut on the desk (Refer to Fig. 2.2.1) or from Windows taskbar, click Start > Programs > Delta > Screen Editor 1.05.XX . [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-6 Revision Apr. 30th, 2007, 2007PDD23000002 When ScrEdit is activated for the first time, the first wi ndow to show up is as follows. Th ere are only File (F), View(V), Option(O) and Help(H) on the t oolbar. Fig. 2.2.3 Screen without editing file 2. After pressing or click Fil[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-7 Fig. 2.2.5 New project screen of ScrEdit There are five parts in the following for ScrEdit editing window.  Menu Bar There are nine functions for sele ction: File, Edi t, View , Element, Screen, T ools, Options, Window , and Help.[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-8 Revision Apr. 30th, 2007, 2007PDD23000002 3. Text Format Toolbar 4. Bitmap Toolbar 5. Element Toolbar 6. Build Toolbar 7. Layout Toolbar Fig. 2.2.6 ScrEdit Toolbar[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-9 Fig. 2.2.7 Move ScrEdit toolbar to the left side of the screen  Property Table It provides element property settings for each element (Fig. 2.2.8 & Fig. 2.2.9). Please refer to Chapter 3 for detailed d escription. Fig. 2.2.8 P[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-10 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.2.9 Editing screen preview  Output Windo w All editing actions and output message when compile func tion is enable d will be shown here (Fig. 2.2.10). When compiling, ScrEdit will detect the e rror of us er program automat[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-11  Work Place Following is an editing example display (Fig. 2.2.1 1). Fig. 2.2.11 ScrEdit Work Place[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-12 Revision Apr. 30th, 2007, 2007PDD23000002 2.3 Menu Bar and T oolbar (File) ScrEdit provides the convenient pull-down Men u and makes it easy for the user to creat e, edit and manage includes elements, pictures, graph s, macro program, reci pes and displays in DOP serie s HM[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-13  Create a New Project Creates a new project by choo sing File > New (Fig. 2.3.2) or clicking the Ne w icon from toolbar (Fig. 2.3.3), or using keyboard shortcut s by pressing Ctrl + N . 1. If this is the first time use and the[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-14 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.3.4 HMI model and base port controller optio ns  Open Old Project Open current project by choosi ng File > Open (Fig. 2.3.7) or clicking the Open ic on from toolbar, or using keyboard shortcuts by pre ssing Ctrl + O . 1[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-15  Close File Closes project by clicking File > Close (Fig. 2.3.10). 1. If project didn’t get saved before issuing the co mmand of closing project, the user will get saving dialog box (Fig. 2.3.6) to remind the user of saving [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-16 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.3.7 Save as dialog box (Dialog box that let user input project name to save as.)  Make Ext. Memory Data Before using this command, ensure to compile the editing scree n data. If not execute the compilation first, the ScrEd[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-17  Open Ext. Memory Data In HMI, the user can move the screen data saved in the flash mem o ry into SM card through folder manager. Then, perform Open Ext. Mem ory Data function and t he user will get the user will get Fig. 2.3.9 d[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-18 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.3.12 Environment dialog box  Upload Recipe This function is similar to upload function but it can o nly upload recipe. Before uploading, it also needs to enter password (the password is the highest priority saved in HMI, w[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-19 Fig. 2.3.14 About ScrEdit  Password Protect The user can enable and di sable password protect fu nction (Fig. 2.3.15 & Fig. 2.3.16) by clicking File > Password protect . Once password protect function is enabled, the user [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-20 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.3.17 Password settings - Security  Print Print current screen by choosi ng File > Print , or clicking the Print icon from toolbar (Fig. 2.3.28), or using keyboard short cuts by pressing Ctrl + P .  Print Preview Sele[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-21  Print Setup Printer and paper settings. Select this fu nction by clicking File > Print Setup . Using this function can set the property of printer, print paper and print di rection, etc. several functions (Fig. 2.3.19). Fig. [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-22 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.3.20 Most recent used files  Exit Exit function is to close all open editing files and offer to save those that have not been save yet and finally exit the ScrEdit. Select this function by c licking File > Exit . If the[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-23 2.4 Menu Bar and T oolbar (Edit)  Edit Adopt pull-down menu similar to Microsoft Office style and provide user-friendly Edit pull-do wn menu (Fig. 2.4.1). Fig. 2.4.1 Edit options  Undo Undo the last action. Select this functio[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-24 Revision Apr. 30th, 2007, 2007PDD23000002  Copy Copy the selected element to the clipb oard. Select this function by choosing Edit > Copy from menu bar or clicking the Copy icon from toolbar, or use keyboard shortcuts by pre ssing Ctrl + C .  Paste Paste element fr[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-25 Find Find What This field is where the user enters th e word or phase that the user is looking for Current Screen This causes ScrEdit to navigate the current screen only and find the matching word or phase that the use r is looking [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-26 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.4.4 Replace option Replace Find What This field is where the user enters th e word or phase that the user is looking for Replace With This field is where the user enters the word o r phase that the user wants to repl ace with[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-27 Replace Fig. 2.4.5 Fig. 2.4.6  Group It is used to group elements in ScrEdi t. Select this function by choosin g Edit > Group from menu bar or clicking the Group icon from toolbar. When two or more elements are g r ouped, it w[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-28 Revision Apr. 30th, 2007, 2007PDD23000002  Ungroup It is used to ungroup elements in ScrE dit. Select this functio n by choosing Edit > Ungroup from menu bar or clickin g the Group icon from toolbar.  Order It is used to set and change the stacking order of the sel[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-29  Text Process It is used to set and change text direction and import text in ScrEdit. The user can select this functio n by choosing Edit > Text Process from menu bar or clicking the Text Process icons from tool bar. next to t[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-30 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.4.8 Duplicate Example 1 Fig. 2.4.9 Duplicate Example 2[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-31 2.5 Menu Bar and T oolbar (V iew)  View Fig. 2.5.1 View options In View option, the user can decide ho w toolbars and docki ng windows display. Once the user clicks on it, it will have icon in front of it and display on screen. T[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-32 Revision Apr. 30th, 2007, 2007PDD23000002 Icon Function Description Paste Paste the element the user copy or cut Find Find specific text, write address or read address New Screen Create a new screen Open Screen Open an old screen Print Print current proje ct Help Scre en ed[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-33  Bitmap Toolbar Table 2.5.3 Bitmap toolbar Icon Function Description Select Transparent Color Remove the color of the picture and determin e the transparent color of the picture Chang Mode for Process All State Picture If this fu[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-34 Revision Apr. 30th, 2007, 2007PDD23000002 Icon Function Drop-down Menu Meter Bar Pipe Pie Indicator Display Movement Input Curve History[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-35 Icon Function Drop-down Menu Alarm Graphic Keypad  Build / Layout Toolbar Build Toolbar Table. 2.5.5 Build toolbar Icon Function Description Current Element State Text on selected element View State OFF/1 Switch and view current [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-36 Revision Apr. 30th, 2007, 2007PDD23000002 Layout Toolbar Table. 2.5.6 Layout toolbar Icon Function Description Group Group the selected el ements Ungroup Ungroup the selected ele ments Bring to Front Move the selected element to the front of all other elements Send to Botto[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-37 Icon Function Description Zoom Out Lets the user reduce the magnification level, including 25%, 50% and 75%. 1:1 Lets the user change elem ent size to actual size (100%).  Property Table Element property table. Please refer to Ch[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-38 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.5.6 Output result of compile operation Fig. 2.5.7 Error output  Zoom In Zoom in to get a close look at the elements on ScrE di t work place. (Refer to Fig. 2.5.8, Fig. 2.5.9) Fig. 2.5.8 Zoom level = 100% (Before Choosing Z[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-39 Fig. 2.5.9 Zoom level = 300% (After Choosing Zoom In comma nd)  Zoom Out Zoom out to see more look of the elements on ScrEdit work place. (Refer to Fig. 2.5.10) Fig. 2.5.10 Zoom level = 50% (After Choosing Zoom Out comm and)[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-40 Revision Apr. 30th, 2007, 2007PDD23000002  Actual Size Return to actual size (100%). This size is relative to the screen size of HMI. The user can also zoom in or out by clicking icon or or selecting the Zoom level directly (Fig. 2.5.11). Fig. 2.5.11 Zoom level  Full [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-41  I/O Screen As Fig. 2.5.13. I/O screen also provides maximum view to edit in ScrEdit just like Full screen. But the difference is that I/O Screen will show th e read a nd write addresses of the element and also shows the set macr[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-42 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.5.15 Show Gird screen[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-43 2.6 Menu Bar and T oolbar (Element)  Element Fig. 2.6.1 Element options Screen editor provides 14 types of elements and there are many styles for ea ch type. These 14 types include Button, Meter, Bar, Pipe, Pie, Indicator, Di spl[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-44 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.6.3 Element display (Create an element) The user can also right-cli ck the mouse to select the desired element. For the property of each element, please refer to Chapter 3 for detailed de scription.  Create an Element The [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-45 Fig. 2.6.5 Select an element by choosing Element co mmand from menu bar Fig. 2.6.6 Drag with left mouse button (Left-click t he mouse, hold i t to drag and release it to finish)[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-46 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.6.7 Release left mouse button to create an element  Move an Element The user can use the mouse to move an element. Mouse op eration is the same as working in Windows® operating syst em. When the mouse cu rsor changes to a[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-47  Modify Element Width The user can also use the mouse to mo dify the width of an element. When t he mouse cursor changes to a two-arrow icon , the user can left-click the mouse and m odify the element width (Fi g. 2.6.9). Fig. 2.[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-48 Revision Apr. 30th, 2007, 2007PDD23000002  Modify Element Width and Height Simultaneo usly The user can also use the mouse to mo dify t he width and height of an element simultaneously. When the mouse cursor changes to a two-a rrow icon or , the user can left-click the m[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-49  Right-click the Mouse The user can find that different menu will pop up whe n right-clicking the mou se (Fig. 2.6.13, Fig. 2.6.14 and Fig. 2.6.15). Fig. 2.6.13 Right-click the mous e on Toolbar - Toolbars window Fig. 2.6.14 Righ[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-50 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.6.15 Right-click the mouse on the el ement - Editing option s (Layout Toolbar)  Cross Reference Ta ble When creating and editing various kin ds of elements, what usually happen s is that the repeat use of the same address.[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-51  Element Part List When Element Part List function is enabled, ScrEdi t will sort out and classify all the element s on the current screen. The user can click the tab to switch to the classificat ion that the user wants to view. [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-52 Revision Apr. 30th, 2007, 2007PDD23000002 2.7 Menu Bar and T oolbar (Screen)  Screen In Screen options, ScrEdit provides some screen editi ng functions (Fig. 2.7.1). Please refer to the following sections for more detailed introduction. Fig. 2.7.1 Screen options If the u[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-53  Open Screen Open an old screen. The user can choose Screen > Open Scree n or click the Open Scre en icon , or use keyboard shortcuts by pressin g Shift + O . When choosing open screen, the user can p review each screen in Ope[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-54 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.7.4 Screen Management dialog box Fig. 2.7.5 Right-click the mouse[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-55 Fig. 2.7.6 Warning message after scre en is cut Fig. 2.7.7 Drag the mouse to determine the screen saver displ ay  Cut Screen Cut whole screen to clipboard, just like the Microso ft Office Clipboard fun ction. The difference is th[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-56 Revision Apr. 30th, 2007, 2007PDD23000002  Copy Screen Copy whole screen. The user ca n ex ecute this function by clicking Screen > Copy Screen or use keyboard shortcut s by pressing Shift + C .  Paste Screen The user can paste a screen by clicking Screen > Pa s[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-57  Clear Import Data The user can free more disk space by cl earing the im ported data that the user does not want to use. Execute this function by clicki ng Screen > Clear Import Data .  Screen Open Macro When Screen Open Ma[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-58 Revision Apr. 30th, 2007, 2007PDD23000002  Auxiliary Key DOP series HMI allows the user to determine the f unction of auxiliary keys in each screen. The user can execute this function by clicki ng Screen > Auxiliary Key . Auxiliary key set u p for each screen can be c[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-59 In Table 2.7.1, the user can see ho w many user-d efined auxiliary keys are available for each model. Table 2.7.1 Available user-defined auxiliary key s DOP-A/AE/AS Series Model Name Available User-defined Auxiliary Keys DOP-AS38BST[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-60 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.7.14 Screen Properties dialog box Table 2.7.2 Screen Properties setting Function Description Screen Number The screen number range is within 1 ~65535 and the number ca nnot be repeated. General View Screen Regarded as general[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-61 Function Description Check the check box next to “This scree n is a sub- screen” The check box next to “This screen is a sub-screen” can be che c ked only when General View Screen option is selected. Therefore, before settin[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-62 Revision Apr. 30th, 2007, 2007PDD23000002 Function Description Setting The user can find this function only in DOP serie s HMI whi ch supports printer function. If the user wants to enable this function, setting the printer in advance is necessary. Please go to Option > [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-63 2.8 Menu Bar and T oolbar (T ools)  Tools Fig. 2.8.1 Tool options  Compile It is used to compile editing screen to the format for HMI. During compiling, all of the compiling messages, including any errors, will be written to o[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-64 Revision Apr. 30th, 2007, 2007PDD23000002 Debug Compiling Error during Compiling Process 3. When pressing icon to execute compile operation, error message dialog box will pop up to warn the user of compiling error and show how many errors there are. In Fig. 2.8.3, we can se[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-65 Fig. 2.8.4 Start to download (the progress will be from 0 to 100%) Fig. 2.8.5 USB open error message Fig. 2.8.6 USB disconnect error message Fig. 2.8.7 Incorrect model name error messag e[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-66 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.8.8 Not compile error message  Download Screen It is only used to download screen data to HMI. The u ser can execute it by clicking Tools > Download Screen or clicking icon directly or using keyboard shortcut s by press[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-67 Fig. 2.8.10 On Line / Off Line Simulation Screen  Off Line Simulation It is used to test if the editing screen, read/ write addresse s and Macro on is correct on developed program without conne cting to PLC. The user can execute [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-68 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.8.11 Recipe Setup dialog box Table 2.8.2 Recipe Editing Recipe Setup Enable Recipe When the check box next to “Enable Recipe” is checked, the re cipe function is enabled. If the user does not enable this function, the use[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-69 Recipe Setup Length It is used to set the recipe length. The un it is Word and it should be set to more than 0. Otherwise, the following dialog box shown as Fig. 2.8.13 will display on the screen. Fig. 2.8.13 Length input error mess[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-70 Revision Apr. 30th, 2007, 2007PDD23000002 Recipe Setup Input Fig. 2.8.16 Open The user can load recipe data by clicking button. The loaded recipe data do not contain the starting address of recipe data. Therefo re, regardless of which brand of the controller connecting to H[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-71 Recipe Setup Clear Fig. 2.8.17 Print It will print all recipe data on current screen. OK After inputting the recipe data, the user can click button to save th e recipe data for transmitting or modifying. At the same time, ScrEdit wi[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-72 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.8.19 32 bits Floating Recipe Setup dialog box Table 2.8.3 32 bits Floating Recipe Editing 32 bits Floating Recipe Setup New: Create a new 32 bits floating recip e file Press to create a new 32 bits floating recipe. After clic[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-73 32 bits Floating Recipe Setup Fig. 2.8.22 Open: Open a 32 bits floating re cipe file Press to open a 32 bits floating recipe file. The file format can be Recip e 32 bits File (*.rcp) and Excel CSV File (*.csv ) (Fig. 2.8.23). Please[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-74 Revision Apr. 30th, 2007, 2007PDD23000002 32 bits Floating Recipe Setup Save: Save a 32 bits floating recipe file Press to save a 32 bits floating recipe file. The default file format of a 32 bits floating recipe file is Excel CSV file (*.csv) (Fig. 2.8.24). Fig. 2.8.24 Del[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-75 Fig. 2.8.25 Download Recipe Recipe Example For recipe control, the user need s to use Recipe Control Register (RECR) and Designated Recipe Group Number Register (RBIR) to control the re ad and write operation of reci pe. The followi[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-76 Revision Apr. 30th, 2007, 2007PDD23000002 Recipe Control Register (RECR) Bit Number Functio n 0 Recipe num ber change 1 Read recipe (PLC → HMI) 2 Write recipe (HMI → PLC) 3 Recipe gr oup number change 4~7 Reserv ed 8~15 Des ignate change rec ipe group number  Control[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-77 group number (N) into the high byte of this control bl ock and u se this control flag to trigger, Dn+5 (Bit 3 is set to ON). After setting, RCPG will be changed to N automatically. This flag need s be set to OFF and then ON if the u[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-78 Revision Apr. 30th, 2007, 2007PDD23000002 Besides, in order to perform simulation operation more conveniently, the Address of Control Block is set to Internal Memory $0. Your Screen will look like the Fig. 2.8.27 shown below. Fig. 2.8.27 Control Block Settings of Configurat[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-79 Fig. 2.8.28 Recipe Example When the user select “Enable Recipe” option in Recipe Setup dialog box, there are RCP and RCPNO two kinds of device types available for the use r to select in Input dialog box (See the following Fig. 2[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-80 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.8.29 Input dialog box The definition of Delta HMI recipe regi ster RCP i s described as follows. In Fig. 2.8.26, the length of example recipe is set to 6 and the group of example re cipe is set to 7. However, HMI actually cre[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-81 Fig. 2.8.30 Change recipe group 32 bits Recipe Example This 32 bits recipe exampl e can be downloaded via the following link: http://59.120.64.39:81/phpbb2/files/32bit_reci pe.dop For the convenience of the user and enhance the fl e[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-82 Revision Apr. 30th, 2007, 2007PDD23000002 For recipe control, the user need s to use Recipe Control Register (RECR) and Designated Recipe Group Number Register (RBIR) to control the re ad and write operat ion of reci pe. The user can refer to page 2-74 ~ page 2-79 for the i[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-83 Fig. 2.8.32 In order to perform simulation ope ration more conven iently, the Address of Control Block is set to Internal Memory $0. Please refer to Fig. 2.8.33 shown belo w. Fig. 2.8.33 Fig. 2.8.34 is an example of starting screen.[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-84 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.8.34 When Internal Memory button is pressed , HMI will ent er intro the screen shown as Fig. 2.8.35. RCPG is used to store the recipe dat a, RCPNO is used to change the re cipe group and RCP0 ~ RCP15 are recipe registers and [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-85 Fig. 2.8.35 Fig. 2.8.36[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-86 Revision Apr. 30th, 2007, 2007PDD23000002 The definition of Delta HMI recipe register RCP i s desc ribed as follows. In Fig. 2.8.31, the length of B1 recipe data is set to 4 and the group of B1 reci pe data is set to 3. However, HMI actually create recipe registers (RCP0 ~ [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-87 Fig. 2.8.38 Besides using internal me mory address (RCPG and RCPNO), the user also can enter into Configuration dialog box and ch ange the address value of recipe regist e r directly. In Fig. 2.8.34, pressing Control Block button is[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-88 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.8.39 Recipe CSV File Editing There are two recipe file types provided in Delta DOP series HMI, one is 16bits recip e file (*.rcp) that only can be edited in ScrEdit software e nvironment and the other is 32 bits reci pe file [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-89 Fig. 2.8.40 32 bits Recipe Example The layout of its csv file is s hown as Fig. 2.8.41 below. The first row sho ws RCP32-1.0. This is the version of this 32 bits recipe and the us er should not change it. Fig. 2.8.41[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-90 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.8.42 Please see Fig. 2.8.42. The right side is the recipe editing window i n ScrEdit and the left side is the Excel editing window. You can see the d ata within th e red frame is the first recipe data. The se cond row of the [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-91 2.9 Menu Bar and T oolbar (Options)  Options Fig. 2.9.1 Options  Configuration The user can execute this function by cli cking Options > Configuration . This di alog box is divided into five tabs: Standard , Communication ,[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-92 Revision Apr. 30th, 2007, 2007PDD23000002 Standard tab in Configuration option Application Name (Standard) It is also File Name. HMI Type (Standard) It is used to select DOP series HMI type for different functions and requirements. Base Port Controller (Standard) It is used[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-93 Standard tab in Configuration option Dynamic Whe n comm unicating with the controller, read the address value and optimize the elements that show on the current screen and adjust the read data length a ccording to the number of scre[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-94 Revision Apr. 30th, 2007, 2007PDD23000002 Communication tab in Configuration option Insert Press Insert button to determine the connectin g device name and the controller: It is used to set the connecting controller. Available connecting controller will be different dependi[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-95 Communication tab in Configuration option Interface It is used to set communication interface. There are RS232, RS422 and RS485 three options. The default setting will be different depending on HMI type the user use s. Data Bits The[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-96 Revision Apr. 30th, 2007, 2007PDD23000002 Interface It is used to set printer interface. The user can specify the communication port of the printer. There are Parallel Port and USB tw o options. If Parallel Port is selected, the optional printer module, DOP-EXPM110 is neede[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-97 Default tab in Configuration option Element Font Color It is used to specify the default element font color when creating an element. Blink Time It is used to specify the default element twinkle time when creating an element. Scroll[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-98 Revision Apr. 30th, 2007, 2007PDD23000002 Other tab in Configuration option Read Controller Address 2. If this option is not selected, the screen saver will be enabled automatically when the Screen Saver Time set in HMI is reached. Please refer to the figure below. If the s[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-99 Other tab in Configuration option Enable Edit Multi- Language User Interface Use this option can enable multi-languag e user interface. The user can view multi-languag e display in property table if this option is selected. The edit[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-100 Revision Apr. 30th, 2007, 2007PDD23000002 3. Control Block (Options > Configuration) Settings Set the address as $200 and set the si ze is 8. 4. Multi-Language Settings Add “English”, “Traditional Chinese” an d “Simplifi ed Chinese” three languages. The sett[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-101 5. Set the display text of “Set” button element in different languages. z Double click the “Simplified Chine se” and enter “ ” in Simplified Chinese” z Double click the Traditional Chinese tab and enter “ ” in Tra[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-102 Revision Apr. 30th, 2007, 2007PDD23000002 8. Select Compile command and execute Off Line Simulation . Then, the user can see the text of the “Set” button is changed in different lang uage by pressing the “Increment” button element.[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-103  Alarm Setup The user can set alarm by clicking Options > Ala rm Setup . The alarm setup should set with the alarm function in element settings. HMI will execute alarm function automatically if both settings are all set. When[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-104 Revision Apr. 30th, 2007, 2007PDD23000002 Alarm Setup Dialog Box Number of Records in History Buffer Use this option to save data in order. When the num ber of records exceeds this setting value, it will delete the records from the first record and insert the new record a [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-105 Alarm Setup Dialog Box The calculation method of the size of the alarm history file is as follows: [] {} Bytes d Bytes c N b Bytes a Bytes Size File Actual ) ( 4 ) ( ) ( 2 ) ( 6 = + × + a Time and Date Data b Alarm Data c Sampling[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-106 Revision Apr. 30th, 2007, 2007PDD23000002 Table 2.9.7 History Setup Settings History Setup Dialog Box Pressing Append button can add a hi story data. Max. 12 history data can be added. After the Add button is pressed, the following Bu ffer Properties dialog box will displa[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-107 History Setup Dialog Box Stamp Time and Date Use this option to determine if the time and date are also record ed during sampling operation. Auto Stop Use this option to determine if HMI stop recording when the max. number of recor[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-108 Revision Apr. 30th, 2007, 2007PDD23000002 History Setup Dialog Box The calculation method of the size of the history data file is as follows: 1. dat file [] {} MBytes d Bytes c N b Bytes a Bytes Size File Actual ) ( 8 1024 1024 ) ( ) ( 2 ) ( 6 = + × × + a Time and Date D[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-109  Tag Table It is used to replace the specific address with the us er-defined words or characters. For example, if the user wants to replace PLC address 1 @Y0 with the wo rd “OS”, just define it in Tag Table option in advance[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-110 Revision Apr. 30th, 2007, 2007PDD23000002 Tag Table Dialog Box Delete The user can use the mo use to select one row of the Tag table, and then press Delete button to delete it. OK Press OK button to save the settings and exit. Cancel Press Cancel to exit without saving. ?[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-111 3. Configuring Print Setup The user can click Options > Configuration > Print to enter into “Print” tab. Then, use the P rint tab to configure the settings of printer, pape r, q uality and margin, etc. options.[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-112 Revision Apr. 30th, 2007, 2007PDD23000002 Print Typesetting Function The user can print many pages one time and arra nge the la yout of the print screen by using print typesetting function. The history data also can be printed at the same time. Please pay particular attent[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-113 Step 3: The user can choose “Yes” or “No” using the “Print Successive Data” drop-down list to determine whether Print Successive Data function is sele cted or not. When “Yes” is selected, it indicates that Print Suc[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-114 Revision Apr. 30th, 2007, 2007PDD23000002 Step2: Right clicking the mouse or use a function key to crea te a “Report List” button on a “Gene ral View Screen”. Then, use this “Report List” button to enable the pri nt function. Step 3: Set the properties of the ?[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-115 Step 4: Connect to the printer and startup the HMI. When “Report Li st ” button is pre ssed, the printer will start to print. Please note that it will take some time when there ar e too many print screens o r the sampling data [...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-116 Revision Apr. 30th, 2007, 2007PDD23000002 Step2: Enable the Print function. Right click ing the mouse or use function key to creat e a “Report List” button on a “General View Scree n”. Then, use this “Report List” button to enable the pri n t function, just lik[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-117 Picture Bank Browse Dialog Box Install Open a picture bank file (*.pib file). Uninstall Uninstall the selected pi cture bank. The uninstall picture bank will be moved to Recycle Bin. Update Save the modified picture into the pictur[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-118 Revision Apr. 30th, 2007, 2007PDD23000002 Picture Bank Browse Dialog Box Shortcut Menu The user can right-click the mouse to di splay a shortcut menu shown in the figure below. This shortcut menu i s a menu that shows a list of commands relevant to the picture ban k option[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-119 Text Bank Dialog Box Close Close and exit the text bank dialog box.  Submarro Use this option to edit sub-macro and to be called by other Macros. For t he Macro function, pl ease refer to Chapter 4 for more details. Fig. 2.9.3 S[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-120 Revision Apr. 30th, 2007, 2007PDD23000002 Table 2.9.11 Environment Settings Environment Dialog Box System Path This is used to set the location where ScrEdit will save the system files, including some system reference data and dynamic link l ibrary (* .dll) files. This opt[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-121 Environment Dialog Box Center Drawing Area When this option is selected, the editing screen will be placed in the center position. Include Picture Data when uploading If this option is selected, all pictures will be uploaded when S[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-122 Revision Apr. 30th, 2007, 2007PDD23000002 2.10 Menu Bar and T oolbar (Windo w )  Window Fig. 2.10.1 Window options  Close Window It is used to hide the current window, NO T exit the cu rrent window. The users can execute this function by clicking Window > Close Wi[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-123 Fig. 2.10.2 Screen status a fter all windows are closed  Next Window It is used to switch the current window to the next window. If the current window is the last wi ndow, the current window will not be changed even if this func[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-124 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 2.10.3 Screen display after cho osing Cascade command  Title Horizontal Display all editing windows from top to bottom. The user can execute this function by clicking Windo w > Title Horizontal . The opened windows are d[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 2-125  Title Vertical Display all editing windows from left to right. T he user can execute this function by clicking Windo w > Title Vertical . The opened windows are displayed vertically as shown as Fig. 2.10.5. Fig. 2.10.5 Scree[...]

Chapter 2 Creating and Editing Screens | ScrEdi t Software User Manual 2-126 Revision Apr. 30th, 2007, 2007PDD23000002 2.1 1 Menu Bar and T oolbar (Help)  Help Fig. 2.11.1 Help option  About ScrEdit Display the version information of Screen Editor an d the firmware information of HMI. Fig. 2.11.2 Screen Editor Version[...]

Revision Apr. 30th, 2007, 2007PDD23000002 3-1 Chapter 3 Element Function In order to meet different applications and requirem ent s, ScrEdit provides variou s elements for the user to use and design. Before us ing and designing these el ements, please read this chapter first to understa nd how to choose an element and the speci al function of each [...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-2 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 3.1.2 Choosing Element command from men u bar Fig. 3.1.3 Choosing Element icon from t oolbar After selecting an element, left-click and drag the m ouse on work place, and then a new element is created.[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-3 3.2 Button Element Fig. 3.2.1 Button element options Table 3.2.1 Button elements Button Type Macro Read Write Function Set ON Yes Yes After pressing this button, t he state of the setting address (Bit) will always be set to ON. If there is an ON[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-4 Revision Apr. 30th, 2007, 2007PDD23000002 Button Type Macro Read Write Function Previous Page No No No After pressing this button, it will go back to the previous screen. For example, suppose that the re are three screens, screen 1, screen 2 and screen 3. If the user has swit ched the s[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-5 Property Description of General Buttons *$ Indirect Address Memory (SDRAM) RCPG Re ceipt Group Number Register Other Other device name supported by other brands of controller. Please refer to DOP Series HMI Connection Manual. Edit On/Off Macro E[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-6 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of General Buttons The user can determine the picture of th e element by clicki ng “Picture Bank Name”. (If “Picture Bank Name” h as been selected, th e user can click “Picture Name” to determine the picture of t[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-7 Property Description of General Buttons Standard Rai s ed Round Invisible Foreground Color Style The user can specify the button style and foreg round color as the figure s above by using this option. Function The user can modify the element cha[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-8 Revision Apr. 30th, 2007, 2007PDD23000002  Multistate Buttons Table 3.2.3 Property descripti on of Multi-state buttons Property Description of Multistate Buttons Multistate buttons accept three kinds un its, WORD, LSB and Bit and the state number will be different by the unit. There [...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-9 Example of Multistate Buttons: When the data length is LSB (D10 0.0 ~ D100.4): S0=D100.0 ON S1=D100.1 ON S2=D100.2 ON S3=D100.3 ON S4=D100.4 ON Fig. 3.2.3 Multi-state buttons display  Set Value Button Table 3.2.4 Property description of Set V[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-10 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Set Value Button s Data Length There are 16bits Word and 32bits Double Word two options. Minimum/Maximum: The user can set the minimum and m aximum of input setting value to determine the range of input setting value. It[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-11 Property Description of Set Constan t Buttons Picture Bank Name Picture Name (Please refer to Table 3.2.2 Property Descriptio n of General Buttons.) Transparent Effect Transparent Colo r (Please refer to Table 3.2.2 Property Descriptio n of Gen[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-12 Revision Apr. 30th, 2007, 2007PDD23000002  Increment / Decrement Table 3.2.6 Property description of Increment / Decre ment buttons Property Description of Increment / Decremen t Buttons After pressing this button on the screen , HMI will read the value from PLC (Controller) and add[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-13 Property Description of Increment / Decremen t Buttons Limit It is used to set the limit of the increment and decrement value. After pressing OK button, HMI will examine the input increment & decrement value and limit value also by referrin[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-14 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Goto Screen / Prev ious Page / Previous View Buttons Foreground Color Style (Please refer to Table 3.2.2 Property Descriptio n of General Buttons.) Function The user can modify the element characte ristic directl y witho[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-15 Property Description of Goto Screen / Prev ious Page / Previous View Buttons InterLock A ddress InterLock Level When InterLock Address is set to be ON or OFF (this is determine d by the property of “InterLock Level”), this button can be ena[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-16 Revision Apr. 30th, 2007, 2007PDD23000002 For the property description of system function buttons, please refer to the following Table 3. 2.9: Table 3.2.9 System function buttons Property Description of Sy stem Function Buttons Text / Text Size Font / Text Color The user can set the te[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-17 Property Description of Sy stem Function Buttons Contrast Brightness This button allows the user to adjust HMI LCD contrast and brightness settings. After pressing this button, the user will get the following pop-up window to adju st HMI LCD co[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-18 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Sy stem Function Buttons After Execute Macro If this option is set, when the user presse s the button, the system will perform the operation of this button first and then exec ute the command of this macro. But, if the s[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-19 3.3 Meter Element Fig. 3.3.1 Meter element options Table 3.3.1 Property Description of Meter Element Property Description of Meter Element The user can set meter appeara nce in the property table, such as the style, the color (including borde r[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-20 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Meter Element Target Value Color The user can decide if the target value display or not by using this option. If this option is set, the target value and its color set by the user will display just lik e the figure shown[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-21 3.4 Bar Element Fig. 3.4.1 Bar element options Table 3.4.1 Property Description of Bar Element Property Description of Normal Bar Element HMI reads the value of the corresponding PLC sp ecific address (register) and convert s the value to norma[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-22 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Normal Bar Element Minimum Value Maximum Value It is used to set the display minimum and maximum value. Target Value Color The user can decide if the target value di splay or not by using this option. If this option is s[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-23 Property Description of Dev iation Bar Element Standard Raised Sunken Style Horizont al The deviation value display horizontally. Display Format Vertical The deviation value display vertically. Data Length There are 16bits Word and 32bits Doubl[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-24 Revision Apr. 30th, 2007, 2007PDD23000002 3.5 Pipe Element Fig. 3.5.1 Pipe element options Table 3.5.1 Property Description of Pipe Element Property Description of Pipe (1) / Pipe (2) Element HMI reads the value of the corresponding address (re gis ter). Then, convert the value to Pipe[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-25 Property Description of Pipe (1) / Pipe (2) Element Minimum Value Maximum Value It is used to set the minimum and maximum capacity of the pipe element. Target Value Color The user can decide if the target value displays or not by using this opt[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-26 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Pipe (4) Element Standard Rotation 90 Rotation 180 Rotation 270 Style Pipe Gauge Use this option to set the pipe gauge. The selectable range is from 1 ~ 5. The setting value 1 represents at least 13 pixels an d the setti[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-27 3.6 Pie Element Fig. 3.6.1 Pie element options Table 3.6.1 Property Description of Pie Element Property Description of Pie Element There are four kinds of Pie elements for the user to select. The u ser can use the element property table to set [...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-28 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Pie Element Target Value Color The user can decide if the target value di splay or not by using this option. If this option is set, the target value and its color set by the user will display on the screen. HMI will refe[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-29 3.7 Indicator Fig. 3.7.1 Indicator element options Table 3.7.1 Property Description of Multistate Indicator Element Property Description of Multistate In dicator Element Multistate indicator provides a method to indicate t he state of som e spe[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-30 Revision Apr. 30th, 2007, 2007PDD23000002 Table 3.7.2 Property Descripti on of Range Indicator Element Property Description of Range Indicator Elemen t Range indicator provide s a method to indicate the state of some specific address. HMI read s the value of the corresponding address ([...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-31 Property Description of Range Indicator Elemen t Variable Limits When this option is selected, there is Range n-1 for the user to use. n represents the total stat e numbers and n-1 represents the total range numbers. For example, if the read ad[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-32 Revision Apr. 30th, 2007, 2007PDD23000002 3.8 Dat a Display Fig. 3.8.1 Data Display element options Table 3.8.1 Function of Data Display ele ments Element Type Function Numeric Disp lay Display the value of the specific address. Characte r Display Display the text or character of the s[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-33 Property Description of Numeric Display Element Leading Zero The followi ng figures show the difference if the user selects the Leading Zero option. (Please note that the integral digit is set to 4 digits.) (If YES is selected, the numeric valu[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-34 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Numeric Display Element Fast Refr esh If this option is sel ected, the element can be displayed immediately when switching the screen. Please note that this function is designed to provide fast value ref resh speed for t[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-35 Property Description of Character Di spla y Element ASCII Code / Hex Cross Reference ASCII Hex A 41 B 42 C 43 D 44 E 45 F 46 Fast Refr esh If this option is sel ected, the element can be displayed immediately when switching the screen. Please n[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-36 Revision Apr. 30th, 2007, 2007PDD23000002  Day-of-w eek Display Table 3.8.6 Property Description of Day-of-week Display Element Property Description of Day -of-week Display Element Display the day (Sunday ~ Monday) of the week. The state default setting of the Day-of-wee k display e[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-37 Property Description of Moving Sign Element Text / Text Size Font / Text Color The user can set the text, text si ze, font and text color provided by Windo ws® to determine the text display on the element. (Please refer to Table 3.2.2 Property[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-38 Revision Apr. 30th, 2007, 2007PDD23000002 3.9 Graph Display Fig. 3.9.1 Graph Display element options Table 3.9.1 Function of Graph Display elements Element Type Icon Function State Graphic It is used to create and display one or more state pict ures on the certain positions of the HMI [...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-39 Property Description of Static Graph ic Element Add/Remove State It is used to set the state numbers of stat ic graphic element. If the data length of the value is in Word, 1~256 states can be set. If the data length of the value is in LSB, 16 [...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-40 Revision Apr. 30th, 2007, 2007PDD23000002  Animated Graphic Table 3.9.3 Property Descripti on of Animated Graphic Element Property Description of Animated Gr aphic Element When HMI is connected to PLC, the user can create animated graphic element s to read the value of several read [...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-41  Dynamic Line Table 3.9.4 Property Descript ion of Dynamic Line Ele ment Property Description of Dynamic Line Element The dynamic line element can be ch anged and moved depending on the value of the corresponding cont act or register . The a[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-42 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Dynamic Line Element Line Style There are following line styles can be selected. Variable Position (Please refer to the description of Read Address above) Variable Color (Please refe r to the description of Read Addres s[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-43 Property Description of Dynamic Rectan gle Element Read Address +5 The value of the Read Address+5 can be used only when Twinkle option is set to Yes. When the value is highe r than 1, the dynamic line element will twinkle. If the value is 0, i[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-44 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Dynamic Ellipse Element Read Address +1 The value of the Read Address+1 can be used only when Variable Central Point option is set to Yes. It is used to represent the vertical position of the element center p oint, i.e. [...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-45 D5=Twinkle [0(not twin kle);1and higher (twin kle)] ---------- ------------------ ------------------ -------- Dynamic Rectangle If the variable position, variable size, variable color a nd twinkle options are all set to Yes, and the address of [...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-46 Revision Apr. 30th, 2007, 2007PDD23000002 3.10 Input Display Fig. 3.10.1 Input element options Set write and read address for the user to input and display address value. Write and read address can b e the same or different. Table 3.10.1 Function of Input elements Element Type Icon Fun[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-47 Property Description of Numeric Entry Element Leading Zero The following figures show the difference if the user selects the Leading Ze ro option. (Please note that the integr al digits are set to 4.) (If YES is selected, the numeric value will[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-48 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Numeric Entry Element Adjust the system keypad size Set the height of the title bar Set the font size Set the font Set the font color Set the background color Minimum Maximum The user can set the minimum and maximum of i[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-49 Property Description of Numeric Entry Element Display Asterisk (*) If YES is selected, the screen will show as the following figure when inputting th e setting value. Fast Refr esh If this option is selected, the element can be displayed immedi[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-50 Revision Apr. 30th, 2007, 2007PDD23000002  Character Entry Table 3.10.3 Property Description of Chara cter Entry Element Property Description of Character Entry Element The user can set write and read add ress to input the data of the specific address by text or cha r acter an d dis[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-51 Property Description of Character Entry Element Adjust the system keypad size Set the height of the title bar Set the font size Set the font Set the font color Set the background color Input Mode There are Touch Popup, Active Non-Popup and Tou [...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-52 Revision Apr. 30th, 2007, 2007PDD23000002 3.1 1 Curve Element Fig. 3.11.1 Curve element options Table 3.11.1 Function of Curve element s Element Type Icon Function Trend Graph It is used to display the value change of the read a ddress by trend graph. The trend graph can display and se[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-53 Property Description of Trend Graph Element Sample Number Detail Setup Max. Sample Number Sample Number can be set to a constant or a variable value. When Sample Number is a con stant : The sample number repres ents a curve which is composed of[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-54 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Trend Graph Element Word Read Format 1. BCD 2. Signed BCD 3. Signed Decimal 4. Unsigned Decimal 5. Hex Read Address The address can be internal memory or the controlle r address. (Please refer to Table 3.2.2 Property Des[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-55 Property Description of X-Y Chart Element Standard Raised Sunken Style Connec t Two Points If Yes option is selected, when drawing the X-Y chart on the screen , the space between two points on the X-Y char t will be connected by lines. Curve Fi[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-56 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of X-Y Chart Element Please note that when the sample number is a constant, the Max. Sample Number option is disabled. When Sample Number is a variable val ue : When the sample number is set to the a ddress (register), the [...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-57 Property Description of X-Y Chart Element Grid Color Horiz. Line Number Vert. Line Number Please refer to the figure below. The gri d color is set to red and the grid number in horizontal and vertical direction are both set to 2. Curve Element [...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-58 Revision Apr. 30th, 2007, 2007PDD23000002 4. Then, the drawing flag of the trend graph, i.e. Trend Draw is $1002.0 and the cl ear flag of the trend graph, i.e. Trend Clear is $1002.8; the dra wing fl ag of the X-Y chart, i.e. X-Y Draw is $1002.1 and the clear flag of the X-Y chart, i.e[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-59 6. Create numeric entry elem ents $35 ~ $56. A fter compile function is completed, execute the program. Then, input the value into the addresse s fro m $35 to $42. When Trend Dra w ($1002.0) is pressed, HMI will start to draw the trend graph. W[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-60 Revision Apr. 30th, 2007, 2007PDD23000002 3.12 Sampling Element Fig. 3.12.1 Sampling element options The sampling element is desig ned to display the hi story data by history graph or table and can be updated immediately for the user to use and read more ea sily . Sampling elements sho[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-61 History Setup Dialog Box Read Address It is used to set the starting address for sampling the history data. Data Length (Word) It is used to set how much words the user wants to sample. The range i s within 1 ~ 13 continuous words. It indica te[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-62 Revision Apr. 30th, 2007, 2007PDD23000002  Historical Trend Graph Table 3.12.2 Property Description of Historical Tren d Graph Element Property Description of Historical Tr end Graph Element Convert the history data to trend g raph with continuous curves and displ ay on HMI screen. [...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-63 Property Description of Historical Tr end Graph Element Please note that if the data format is selected as “Floating”, the Data Length option in the History Setup dialog box must be greater than or equal to 2words or the follo w ing warning[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-64 Revision Apr. 30th, 2007, 2007PDD23000002  Historical Data Table Table 3.12.3 Property Description of Historical Data T able Element Property Description of Historical Da ta Table Element Convert the history data to nume ric data and di splay on HMI screen by a data t a ble. The rea[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-65 Property Description of Historical Da ta Table Element Date Length There are 16bits Word and 32bits Double Word two options. There are following data format provided: Word Double Word Data Format 1. BCD 2. Signed BCD 3. Signed Decimal 4. Unsign[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-66 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Historical Ev ent Table Element Add/Remove State It is used to set the state numbers of historical event table element. If the data length of the value is in Word, 1~256 stat es can be set. If the data length of the valu[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-67 Fig. 3.12.2 History Graph[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-68 Revision Apr. 30th, 2007, 2007PDD23000002 3.13 Alarm Element Fig. 3.13.1 Alarm element options Table 3.13.1 Function of Alarm elements Element Type Icon Function Alarm History Table HMI will monitor and read the read address in a fixed time automati cally. If some certain Bit contact o[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-69 Property Description of Alarm History Table Element Time Format Provide HH:MM:SS , HH:MM two kinds of formats. Date Format Provide MM/DD/YY , DD/ MM/YY and DD.MM.YY three kinds of formats. Alarm Number If this option is selected, when the alarm[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-70 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Activ e Alarm List Element Time Format Provide HH:MM:SS , HH:MM two kinds of formats. Date Format Provide MM/DD/YY , DD/ MM/YY and DD.MM.YY three kinds of formats. Alarm Number If this option is selected, when the alarm [...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-71 Property Description of Alarm Frequency Table Element Time Format Provide HH:MM:SS , HH:MM two kinds of formats. Date Format Provide MM/DD/YY , DD/MM/YY and DD.MM.YY three kinds of formats. Alarm Number If this option is selected, when the alar[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-72 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Alarm Mov ing Sign Element Time Provide HH:MM:SS and HH:MM two kinds of di splay format. Date Provide MM/ DD/YY, DD/MM/YY and DD.MM.YY three kinds of display format. Alarm Number If this option is selected, when the alar[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-73 3.14 Graphic Element Maybe the user needs some graphics th at are not pr ovided. Therefore, the fo llowing basic graphic eleme nts are for the user to create their own graphs or d rawings. Fig. 3.14.1 Graphic element options  Line Table 3.14[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-74 Revision Apr. 30th, 2007, 2007PDD23000002  Rectangle Table 3.14.2 Property Description of Rectangl e Graphic Element Property Description of Rectangle G raphic Element Left-click the mouse to dra w and edit the rectangle graphi c element. The user can drag the mouse acro ss work pla[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-75 Property Description of Circle Graph ic Element An circle that its “Transparent” setting in the prop erty table is set to “No”. An circle that its “Transparent” setting i n the property table is set to “Yes”. An ellipse that its[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-76 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Poly gon Graphic Element Line Size The unit is Pixel and the range is within 1 ~ 8. Transparent When this option is selected, the element w ill display only with the border and there is no color in the element. Th e Fore[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-77  Text Table 3.14.6 Property Description of Text Graphi c Element Property Description of Text Graphic Element This text graphic element is used to create a text frame, and add and edit the text on the screen . The user can drag the mouse acr[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-78 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Scale Graphic Element Standard Rotation 90 Rotation 180 Rotation 270 Style Main Scale Please refer to the figures below: When main scale number is set to 2 When main scale number is set to 3 Display Mark It is used to de[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-79 Property Description of Scale Graphic Element SubScale Number When the main scale number is set to 3 and the subscale number i s also used, the scale graphic element will display as the figures b elow: When subscale number is set to 1 When main[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-80 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Table Graphic Element Columns Header It is used to the color of the interlacing column hea der of the table. The user can enable or disable this option b y checking the check box ne xt to “Columns Header”. Sep. Rows [...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-81 3.15 Keyp ad Element Table 3.15.1 Property Description of Keypad Element Property Description of Key pad (1) / (2) / (3) Element Provide three kinds of default keyp ad elements for sele ction. The user can select decimal, hexadecim al or charac[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-82 Revision Apr. 30th, 2007, 2007PDD23000002 Property Description of Key pad (1) / (2) / (3) Element Text Text Size Font Text Color The user can set the text, text size, font and text color that provided by Windows® to determine the text display on the element. When the u ser press butto[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual Revision Apr. 30th, 2007, 2007PDD23000002 3-83 Example for Keypad Element This example can be downloade d via the following link: http://59.120.64.39:81/phpbb2/files/keypad.dop In this example, the user can use thr ee different kinds of keypad e lements.[...]

Chapter 3 Element Function | ScrEdit Software Us er Manual 3-84 Revision Apr. 30th, 2007, 2007PDD23000002 This page int entionally left blank.[...]

Revision Apr. 30th, 2007, 2007PDD23000002 4-1 Chapter 4 Macro Function Macro function provides various comma nds. When the HMI user works with macro commands on the HMI, it can reduce the PLC program editing efficiently. Therefore, Macro is a very convenient function for the HMI user to use. After editing Macro, the user can test th e Macro validit[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-2 Revision Apr. 30th, 2007, 2007PDD23000002 4.1 Macro T ype Delta DOP series HMI provides el even kinds of macro commands and they are di vided into four categories. Please refer to the following: 1. Element ON / OFF Macro: It is provided for each Bi t element that can be input, su ch as [...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-3  ON Macro This macro is attached to a button eleme nt. The user can use ON Macro for each specific button (Bit). It is called ON Macro becau se this start Macro is set to ON via setting the button (Bit). When the button is set to be ON, ON Mac[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-4 Revision Apr. 30th, 2007, 2007PDD23000002  Screen Cycle Macro The user can use Screen Cycle Macro to cycle ea ch screen. Each screen has a Screen Cycle Macro and it can be executed repeatedly for a specified period of cycle time. The user can set the Macro Cycle Delay Time, i.e. the [...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-5 command is executed, system will st art to execute this macro again from the first macro com mand. Since this macro works like this, if there is other executed Macro, such as cycle m acro, it will not have any influences. For example, suppose tha[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-6 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 4.1.3 Clock Macro Delay Time Setting  Sub-macro There are 512 sub-macros for editing. Sub-macro is similar to the subro utine in the in program. The user can write repeated action or functio n in sub-ma cro to save macro editing time and[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-7 4.2 Macro Editing After choosing the desired Macro comm and from menu bar, the user can start editing Macro as sho wn as Fig. 4.2.1 below. The Macro command di alog box will pop up when is clicked. For the user’s convenience, the user can enter[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-8 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 4.2.3 Last line of Macro Fig. 4.2.4 Blank line becomes commen t line Once the editing Macro starts, the Macro comma nd edit ing window will pop up (F ig. 4.2.5) by clicking .. The user can determine the comma nd that the user needs by press[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-9 Fig. 4.2.5 Macro command editing windo w  File  Open Macro ScrEdit provides open old macro function for the convenien ce of editing macro. T he user can open old Macro files when using any PLC bran d to save Macro editing time without re-in[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-10 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 4.2.7 Save As Macro  Copy One or More Macro Commands In Macro Command Window , if the user does not want to copy the whole macro file and just need to modify part s of macro commands, we recommend the user to use this fun ction. The use[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-11 Fig. 4.2.9 Paste one or more macro com mands Fig. 4.2.10 The result of copying an d pasting one or more macro commands  Edit The user can edit Macro via Edit option in Macro Command dial og box (Fig. 4.2.1 1) or from toolbar (Fig. 4.2.12). Fi[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-12 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 4.2.12 Edit option from toolbar  Previous Move the selected line to the upper line of macro and the upper line of macro will move backward a line.  Next Move the selected line to the lower line of macro and the lowe r line of macro w[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-13 Fig. 4.2.13 Command option in Macro Command di alog box Fig. 4.2.14 Commands options Fig. 4.2.15 Arithmetic Fig. 4.2.16 Logical Fig. 4.2.17 Data transfer Fig. 4.2.18 Data conversion Fig. 4.2.19 Comparison Fig. 4.2.20 Flow control Fig. 4.2.21 Bit[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-14 Revision Apr. 30th, 2007, 2007PDD23000002 4.3 Macro Operation  Definition WORD 16 Bit data (It is made up of continuous 2 bytes, i.e. 16 bits, b15~b0. It can be used to represent 0000~FFFF of hexadecimal system. DWORD, DW 32 Bit data (It is made up of continuous 2 words, i.e. 32 bit[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-15 Command Equation Description Remark FADD V1 =FADD( V2 , V3 ) Addition FSUB V1 = FSUB( V2 , V3 ) Subtraction FMUL V1 =FMUL( V2 , V3 ) Multiplication FDIV V1 =FDIV ( V2 , V3 ) Divisi on Floating Point Operation FMOD V1 =F MOD( V2 , V3 ) Ge t Remai[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-16 Revision Apr. 30th, 2007, 2007PDD23000002 Example: Subtract 1 form the value contained wi thin the internal memory address #2 $2 = $2 - 1 The value contained within the internal memory address #1 is subtracted from the value cont ained within the internal memory address #2 and the re s[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-17 within V3 cannot be equal to 0(zero). Example: The value contained within the internal memory address #2 is divided by 1. $2 = $2 / 1 The value contained within the internal memory address #2 is divided by 5 and the result of this calculation is[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-18 Revision Apr. 30th, 2007, 2007PDD23000002 $4 = 3 $5 = 2 $10 = 3 $0 = ADDSUMW($2, $10) Add up the values contain ed within the internal memory address #2, #3, and #4 (as the value of #4 is the same as the value of #10) and the g rand total is stored in the address #0. The value of the g[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-19  COT Cot angent Function O peration Equation: V1 = COT(V2) (Signed DW) Perform the cot angent function operation on V2, and store the remainder in V1. Example: $0 = COT(50) The result is $0 = 0.839  SEC Secant Function Operati on Equation:[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-20 Revision Apr. 30th, 2007, 2007PDD23000002  | Operand Bit OR operation Equation: V1 = V2 | V3 Perform the Bit OR operation on V2 and V3 and sav e the result of this calculation in V1. Example: $2 = F000H $4 = 0F00H $6 = $2 | $4 S tore the result of $6 in FF00H  && Operand [...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-21 $2 = F100H $4 = NOT $2 S tore the result of $4 in 0EFFH  << Operand Bit Shif t-lef t operation Equation: V1 = V2 << V3 Shift V2 (WORD/DWOR D) data to left (number of bit is V3). The result of this calculation i s stored in V1. Exa[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-22 Revision Apr. 30th, 2007, 2007PDD23000002 Command Equation: Description Rema rk BMOV BMOV(V1, V2, V3) Block move V1 and V2 only can be PLC address or internal memory. FILL FILL(V1, V2, V3) Fill the memory V1 can be internal memory only. CHR CH R(V1, "V2") Convert text t o ASC[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-23 FILL(V1, V2, V3) means to fill address V1 with da ta in address V2 and the dat a number is V3. If the block length is more than internal memory or maximum number of PLC address, there w ill be error occurred w he n compiling. Example: $5 = 10 FI[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-24 Revision Apr. 30th, 2007, 2007PDD23000002 Command Equation Description MAX V1 = MAX(V2, V3) Get Maximum va lue MIN V1 = MIN(V2, V3) Get Minimum value A2H V1 = A2H(V2) Convert AS CII code to 4-digit integer H2A V1= H2A (V2) Convert h exadecimal in t e ger to AS CII code FCNV V1= FCNV (V[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-25 $4 = -10 (Signed) $7 = W2D($4)(Signed)  B2W Convert BYTE to WO RD Equation: V1 = B2W(V2 , V3) Convert BYTE dat a (number of byte is V3) from V2 to WORD value and store the result in V1. The high byte will be filled with 0. As the unit of V2 i[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-26 Revision Apr. 30th, 2007, 2007PDD23000002  SWAP Swap BYTE Dat a of the WORD Equation: SW AP (V1, V2, V3) Swap high-byte and lo w-byte of V2, V2+1, V2+2 …V2+V3 (WORD) and store the res ult in the starting position of V1, V1+1, V1+2…V1+V3 in ord er. Example: SW AP($1, $10, 5) Swap[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-27 Example: $1 = 2 $2 = 10 $0 = MIN($1, $2) The result is $0 = 2  A2H Convert 4 ASCII code to a four digit s integer in hexadecimal format Equation: V1 = A2H(V2 ) Convert the ASCII code of V2 (4 WO RDS) to integer and store the result in V1. Exa[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-28 Revision Apr. 30th, 2007, 2007PDD23000002  ICNV Convert floating point v alue to integer Equation: V1= ICNV (V2) (Signed DW) Convert floating point v alue or integer in V2 to integer and store in V1. Example: $2 = FMOV(100.5) (Signed DW) $0 = ICNV ($2) (Signed DW) The result is $0 =[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-29 Example: IFB 1@M0 == ON THEN GOTO LABE L 1  IF…THEN CALL … Equation: IF V1 == V2 THEN CALL macro If V1 is equal to V2, it will call macro. V1 and V2 should be internal memory or consta nt. Example If $2 is equal to 10, then it will call s[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-30 Revision Apr. 30th, 2007, 2007PDD23000002 comparison command, IF…ELSE…ENDIF .  FCMP Floating point value compa r ison co mmand. Equation: V1 = FCMP(V2, V3) (Signed DW) V1 FCMP(V2, V3) 0 V2 = V3 1 V2 > V3 2 V2 < V3  Flow Contro l There are five types for flow control: GO[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-31 However , in the sub-macro program, the user can call another sub-macro program but the levels for calling sub-macro should be less than 6 levels. CALL RET Mai n Mac ro Sub- Mac ro A1 Fig. 4.3.1  FOR…NEXT Program Loop Equation: FOR V1 S tat[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-32 Revision Apr. 30th, 2007, 2007PDD23000002 End command is used to end the macro prog ram. S tatem ents2 will not be executed af ter St atemenets1 is executed. The program w ill execute from the com mand of the first line next time. Please note that END means finishing executing macr o. [...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-33 $ 2 = 111111111111111 1 B CLRB $2.15 T h e r e s u l t i s $ 2 = 0 1111111 11111111 B  INVB Set specific bit to be inversed. ON Æ OFF , OFF Æ ON Equation: INVB V1 Set V1 Bit to be inversed. ON Æ OFF , OFF Æ ON Example: Set the value of 0t[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-34 Revision Apr. 30th, 2007, 2007PDD23000002  INITCOM INITCOM → Initial setup COM port to st art communication and set communication proto col. Fig. 4.3.2 INITCOM Fig. 4.3.3 Variable2 settings in INITCOM (com munication protocol) Fig. 4.3.4 COM port Fig. 4.3.5 Communication interface[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-35 Flow Contr ol The transmission spe ed and communication validity are en hanced during comm unication due to new transmission technology , such as compress imm ediately , debug,…etc. But the new technology also makes the transmission sp eed bet[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-36 Revision Apr. 30th, 2007, 2007PDD23000002  GETCHARS GETCHARS → Get characters by COM port. V1= GETCHARS (V2, V3, V4). V1 is the response value after communication. If the communication has succeeded, the result will be stored in $1. If the communica tion has failed, the result wil[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-37 $0 = CHRCHKSUM("24", $10, 2) After the above operatio n, 4 is stored in $0 and 4 represent s the data length is 2 WORDS. The checksum stored in $10 is 66H.  Communication Macro Example This communication macro example can be downloa[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-38 Revision Apr. 30th, 2007, 2007PDD23000002 $20 = 3A00H Set starting Bit. Because the value of high byte and low byte will be exchanged wh en HMI sends command, even though the starting Bit is 3A when sending data, it is needed to input 3A00. $28 = 0A0DH Set end Bit. Because the value of[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-39 $1001 = 3A00H Set starting Bit. Because the value of high byte and low byte will be exchanged wh en HMI sends command, even though the starting Bit is 3A when sending data, it is needed to input 3A00. $1009 = 0A0DH Set end Bit. Because the value[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-40 Revision Apr. 30th, 2007, 2007PDD23000002 Command Equation Descrption SETSYSTEMTIME SETSYSTEMTIME(V1) Set system time GETHISTORY V1 = GETHISTORY (V2, V 3, V4, V5, V6) Get history data  TIMETICK TIMETICK → Get the time from system startup to present and put in to the specific addre[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-41 $1 = GETSYSTEMTIME Get $1 = 2006, $2 = 01, $3 = 4, $4 = 3, $5 = 9, $6 = 26, $7 = 25  SETSYSTEMTIME Set system time Equation: SETSYSTEMTIME(V1) V1 is the starting add ress of continuous 7 W o rds within the internal memory address. V1 Y ear V1[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-42 Revision Apr. 30th, 2007, 2007PDD23000002 4.4 Error Messages When compiling, it will shows errors in output window for user to find out easily. Some errors occur because of the user’s care lessness, sometimes just be cause t he user misses an input command. Some errors will be found [...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-43  Code–107: There is RET in Macro This error message mean s that there is RET co mmand in Macro. RET command should be used for sub-macro to return program. It means that the program does not finish. If the program needs to be finished in Ma[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-44 Revision Apr. 30th, 2007, 2007PDD23000002  HMI Communication Error Messages Fig. 4.4.1 Example of HMI Communication Error Messag e When HMI cannot communicate with the controller , please p ay close attention on the information shown on HMI screen. If you cannot identify it, pleas e[...]

Chapter 4 Macro Functio n | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 4-45  Unkno wn Code Error Message: Com ? S tation ?: Receive Unknow Code ...  No Response from Con troller Error Message: Com ? S tation ?: Controller No Response ...  HMI CheckSum Error Error Message: Com ? S tation ?: Ch eck Sum Error in H[...]

Chapter 4 Macro Functio n | ScrEdit Software User M a nual 4-46 Revision Apr. 30th, 2007, 2007PDD23000002  Controller Station Number Error Error Message: Com ? S tation ?: Controller S tation Number Error ...  UART Communication Error Error Message: Com ? S tation ?: UART Communi cation Error ...  Other Communication Error Error Message: C[...]

Revision Apr. 30th, 2007, 2007PDD23000002 5-1 Chapter 5 Control Block and S tatus Block For two-way communicati on and display screen between DOP series and all brands’ PL C, it needs to define the address of HMI control block and sta tus block in Standard tab. Please cho ose Options > Configuration to find the Standard tab in Configuration di[...]

Chapter 5 Control Block and Status Block | ScrEdit Softw are User Manual 5-2 Revision Apr. 30th, 2007, 2007PDD23000002 The definition for each function and usage of Control Block and Status Block will be introduced in the following chapters. 5.1 Control Block HMI can be controlled via PLC by designating the re gist er from control block settings. T[...]

Chapter 5 Control Block and Status Block | ScrEdit Softw are User Manual Revision Apr. 30th, 2007, 2007PDD23000002 5-3  Enable / Di sable Communication Control the HMI communication. If the user choose the communication can cel times option in Communication t ab in Configuration dialog box (F ig. 5.1.1), once reach the communication cancel times[...]

Chapter 5 Control Block and Status Block | ScrEdit Softw are User Manual 5-4 Revision Apr. 30th, 2007, 2007PDD23000002  Setting User Level PLC can set the user level of using HMI from Bit 8, Bit 9 and Bit 10. The setting level is from level 0 to level 7. For example, when set Bit 8 to be ON, the us er level is 1; when set Bit 9 to be ON, the use[...]

Chapter 5 Control Block and Status Block | ScrEdit Softw are User Manual Revision Apr. 30th, 2007, 2007PDD23000002 5-5 Bit Number Function 3 Control flag for Sampling History Buffe r 4 4 Control flag for Sampling History Buffe r 5 5 Control flag for Sampling History Buffe r 6 6 Control flag for Sampling History Buffe r 7 7 Control flag for Sampling[...]

Chapter 5 Control Block and Status Block | ScrEdit Softw are User Manual 5-6 Revision Apr. 30th, 2007, 2007PDD23000002 Bit Number Functio n 6 Clear flag of hi story buffer 7 7 Clear flag of hi story buffer 8 8 Clear flag of hi story buffer 9 9 Clear flag of hi story buffer 10 10 Clear flag of hist ory buffer 11 11 Clear flag of hist ory buffer 12 1[...]

Chapter 5 Control Block and Status Block | ScrEdit Softw are User Manual Revision Apr. 30th, 2007, 2007PDD23000002 5-7  Control Flag for Writi ng Recipe Before writing a recipe to PLC, the user should de signate the recip e number (N) first (Please refer to the section “ Control Flag for Ch anging Recipe Number ”). Then, tri gger this contro[...]

Chapter 5 Control Block and Status Block | ScrEdit Softw are User Manual 5-8 Revision Apr. 30th, 2007, 2007PDD23000002 designating language a ccording to the settings in this register . Up to 8 different kind s of languages is provided for the user selection. The language can be switche d through the setting value of this register . The setting val[...]

Chapter 5 Control Block and Status Block | ScrEdit Softw are User Manual Revision Apr. 30th, 2007, 2007PDD23000002 5-9 5.2 St atus Block For two-way communicati on and display screen between DOP series and all brands’ PL C, it needs to input starting address of response regi ster in status block. The status block in DOP series HMI is a continuous[...]

Chapter 5 Control Block and Status Block | ScrEdit Softw are User Manual 5-10 Revision Apr. 30th, 2007, 2007PDD23000002  Clear Sta tus of Al arm Coun ter When HMI clear the alarm counte r (clear status of alarm counter function is ena bled), the Bit will be set to ON. After this function is completed, the Bit will be OFF .  User Level Status [...]

Chapter 5 Control Block and Status Block | ScrEdit Softw are User Manual Revision Apr. 30th, 2007, 2007PDD23000002 5-11  Curve Sampling Stat us Flag When sampling general trend graph o r X-Y chart, the curve sampling st atus flag will be set to be ON (Bit 0 ~ Bit 3 is set to ON). After sampling operati on is completed, the cu rve sampling st atu[...]

Chapter 5 Control Block and Status Block | ScrEdit Softw are User Manual 5-12 Revision Apr. 30th, 2007, 2007PDD23000002 Bit Number Functio n 9 Clear Status of History Buffer 10 10 Clear Stat us of History Buffer 11 11 Clear Stat us of History Buffer 12 12~15 Reserv ed  Clear Histor y Buffer Flag When clearin g history buff er , the clear history[...]

Chapter 5 Control Block and Status Block | ScrEdit Softw are User Manual Revision Apr. 30th, 2007, 2007PDD23000002 5-13 Bit Number Functio n 8 Printer status flag 9 Printe r form fe ed status flag 10~15 Reserv ed  Multi-language Status Value The user can know the current multi-lang uage shown on HMI from the multi-language status value.  Prin[...]

Chapter 5 Control Block and Status Block | ScrEdit Softw are User Manual 5-14 Revision Apr. 30th, 2007, 2007PDD23000002 This page int entionally left blank.[...]

Revision Apr. 30th, 2007, 2007PDD23000002 6-1 Chapter 6 Internal Memory  Internal Register (R/W): $ Word a ccess: $n (n: 0~65535) Bit access: $n.b (n: 0~65535, b: 0~15) Delta DOP series HMI provides 65536 16-bit internal registe rs ($0 ~ $65535).  Non-volatile Internal Regi ster (R/W): $M Word a ccess: $Mn (n: 0~1023) Bit access: $Mn.b (n: 0~[...]

Chapter 6 Internal Memory | ScrEdit Software Us er Manual 6-2 Revision Apr. 30th, 2007, 2007PDD23000002 Assume that the user set’s the receipt le ngth is L and the receipt group num ber is N: Group Address Access: This method is accessed by RCPNO an d RCP0~RCP (L-1). For example: if RCPNO=3, HMI will read RCP NO 3 dat a out and save it in RCP0~RC[...]

Revision Apr. 30th, 2007, 2007PDD23000002 7-1 Chapter 7 Example Explanation Programming MACRO files This is for reference only. But will help the user to understand the requirem ents of using the HMI for controlling the VFD-E AC drive. This is a tool to help in learning how HMI programming is don e. Making a button to turn on the VFD-E AC drive We [...]

Chapter 7 Example Explanation | Sc rEdit Software User Manual 7-2 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 7.1 The Screen will look like this after the us er click the OK button. See Fig. 7.2 Fig. 7.2[...]

Chapter 7 Example Explanation | Sc rEdit Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 7-3 • Select the Element drop down. Select Button, Select SET The Screen will look like this. See Fig. 7.3 Fig. 7.3 • After that the cursor will be a + • Left click and drag the mouse in the Screen area. The screen will look like this after[...]

Chapter 7 Example Explanation | Sc rEdit Software User Manual 7-4 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 7.4 • In the Write Address type in 10.1. See Fig. 7.5 Fig. 7.5[...]

Chapter 7 Example Explanation | Sc rEdit Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 7-5 • Select the Edit On Macro • In the Macro section type in (2@INVERTER-2000) = 2 • This will cause the Drive to turn on when the butt on is selected. The screen will look like Fig. 7.6. Fig. 7.6 • Go to the Screen drop down and at the [...]

Chapter 7 Example Explanation | Sc rEdit Software User Manual 7-6 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 7.7 • The Configuration of the HMI control must be set-up to control the drive. • To do this you must set the baud rate and signaling for the HMI and the drive. • The computer must be set-up to download the information to the HMI w[...]

Chapter 7 Example Explanation | Sc rEdit Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 7-7 Fig. 7.8[...]

Chapter 7 Example Explanation | Sc rEdit Software User Manual 7-8 Revision Apr. 30th, 2007, 2007PDD23000002 Making a Stop Button with Macro’s The next button will be made to turn the drive off. • Select the set button again. • In the Address button select 11.0 • In the Edit on Macro section Type (2@INVERTER-2000) = 1 • This will turn off [...]

Chapter 7 Example Explanation | Sc rEdit Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 7-9 • In the Text portion for each button type in ON and OFF for each Button then the user will see the effect when using them and know which one to sele ct. • Select the Icon to download it to the HMI. • Select the Icon to c ompile the pro[...]

Chapter 7 Example Explanation | Sc rEdit Software User Manual 7-10 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. 7.11[...]

Revision Apr. 30th, 2007, 2007PDD23000002 A-1 Appendix A Specifications and Installation A.1 Specifications MODEL AS38BSTD(-W) A(E)57BSTD(-W) A(E)57GSTD(-W) A(E)57CST D(-W) Operation System Windows Base Real Time OS MCU 32-bit RISC Micro-cont roller / 206.4MHz NOR Flash ROM NOR Flash ROM 2 Mbytes (System: 1MB / User: 1MB) NOR Flash ROM 4 Mbytes (Sy[...]

Appendix A Specifications and Installation | ScrE dit Software User Manual A-2 Revision Apr. 30th, 2007, 200 7PDD23000002 MODEL AS38BSTD(-W) A(E)57BSTD(-W) A(E)57GSTD(-W) A(E)57CST D(-W) Vibration Resistanc e IEC61131-2 compliant When vibration is NOT continuou s: 5Hz-9Hz 3.5mm, 9Hz-150Hz 1G When vibration is continuous: 5Hz-9Hz 1.75mm, 9Hz-150Hz 0[...]

Appendix A Specifications and Installation | ScrE dit Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 A-3 MODEL A80THTD1 AE80THTD AE94BSTD A10TCTD AE10THTD Operation System Windows Base Real Time OS MCU 32-bit RISC Micro-controll er / 206.4MHz NOR Flash ROM NOR Fla sh ROM 8 Mbytes (System: 1MB / User: 7MB) SDRAM 32 Mbytes 16Mbytes 32[...]

Appendix A Specifications and Installation | ScrE dit Software User Manual A-4 Revision Apr. 30th, 2007, 200 7PDD23000002 MODEL A80THTD1 AE80THTD AE94BSTD A10TCTD AE10THTD Operation Voltage DC +24V (-10% ~ +15%) (Please use isolated power sup ply) (Note 3) Backup Battery 3V lithium battery CR2032 x 1 / battery life: 5 years Buzzer 85dB NOTE 1) Only[...]

Appendix A Specifications and Installation | ScrE dit Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 A-5 A.2 Dimensions and Profile  DOP-AS38BSTD(-W) Units: mm Number Description A COM1/COM3 ( RS232) B Power Input Terminal C USB Client D USB Host E COM2(RS422/RS485) A B C D E[...]

Appendix A Specifications and Installation | ScrE dit Software User Manual A-6 Revision Apr. 30th, 2007, 200 7PDD23000002  DOP-A(E)57G (B)( C)STD(-W) Units: mm Number Description A COM2(RS2323/RS42 2/RS485) B COM1(RS232) C USB Client D Power Input Terminal E Extension slot for SM Card F Extension slot (For AE) A B C E D F[...]

Appendix A Specifications and Installation | ScrE dit Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 A-7  DOP-A80THTD1/DOP-AE 80THTD Units: mm Number Description A Power Input Terminal B Battery Cover C USB Host D USB Client E COM1(RS232) F COM2(RS2323/RS422/RS485) G Extension slot for SM Card H Extension slot (For AE) B F D H A [...]

Appendix A Specifications and Installation | ScrE dit Software User Manual A-8 Revision Apr. 30th, 2007, 200 7PDD23000002  DOP-AE94BSTD Units: mm Number Description A Power Input Terminal B Battery Cover C USB Host D USB Client E COM1(RS232) F COM2(RS2323/RS422/RS485) G Extension slot for SM Card H Extension slot (For AE) B F D H A C E G[...]

Appendix A Specifications and Installation | ScrE dit Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 A-9  DOP-A10TCTD/DOP-AE1 0THTD Units: mm Number Description A Power Input Terminal B Battery Cover C USB Host D USB Client E COM1(RS232) F COM2(RS2323/RS422/RS485) G Extension slot for SM Card H Extension slot (For AE) B F D H A C[...]

Appendix A Specifications and Installation | ScrE dit Software User Manual A-10 Revision Apr. 30th, 2007, 2007PDD23000002 A.3 Inst allation Install the fixed support from the internal side of HMI. 1. Do not turn the screw more than it s torque specification to avoid damage to plastic box. 2. Damage may occur if torque excee ds 0.7N.M 3.8” Panel ([...]

Appendix A Specifications and Installation | ScrE dit Software User Manual Revision Apr. 30th, 2007, 2007PDD23000002 A-11 8.0” Panel (DOP-A80TH TD1, DOP-AE80THTD) 9.4” & 10.4”Panel (DOP-AE9 4BSTD, DOP-A(E)10TC(H) TD) DOPA(E) 10TC(H) TD DOPAE94BSTD Top View Mounting holes Bottom View Mounting holes Fixed support Snap-in panel mount Top Vie[...]

Appendix A Specifications and Installation | ScrE dit Software User Manual A-12 Revision Apr. 30th, 2007, 2007PDD23000002 This page int entionally left blank.[...]

Revision Apr. 30th, 2007, 2007PDD23000002 B-1 Appendix B USB Flash Drive Update Function DOP series HMI, which provides USB flash drive update function, has a built-i n USB host interface. The user can connect HMI to a USB flash drive via this U SB host interface and downloa d HMI screen data and upgrade the firmware of HMI. It also provides encryp[...]

Appendix B USB Flash Drive Function | S crEdit Software User Manual B-2 Revision Apr. 30th, 2007, 200 7PDD23000002 After compile operation is completed, please click File > Make Ex t. Memory Data (Fig. B.2), and then system will ask you to choose the location to save the file (Fig. B.3). After pressing OK button, the screen data file can be crea[...]

Appendix B USB Flash Drive Function | S c rEdit S oftware User Manual Revision Apr. 30th, 2007, 2007PDD23000002 B-3 Fig. B.4 Fig. B.5 Fig. B.6 Fig. B.7[...]

Appendix B USB Flash Drive Function | S crEdit Software User Manual B-4 Revision Apr. 30th, 2007, 200 7PDD23000002 Then, connect USB flash drive to HMI. After power in connected to HMI, power on HMI and a warning dialog box will display as shown as Fig. B.7 on previous page. This warning message is used to remind the user that the data transfer and[...]

Appendix B USB Flash Drive Function | S c rEdit S oftware User Manual Revision Apr. 30th, 2007, 2007PDD23000002 B-5 Fig. B.9 Fig. B.10 Screen Data Encryption Clear HMI Flash ROM Copy screen data from a USB flash drive to HMI Upgrade the firmware via USB flash drive Copy screen data to a USB flash drive Screen Data Encryption Upgrade the firmware vi[...]

Appendix B USB Flash Drive Function | S crEdit Software User Manual B-6 Revision Apr. 30th, 2007, 200 7PDD23000002 Data Encryption: It is used to enable the screen data encryption function. When pre ssing this icon, one dialog box will pop up and ask if the user w ants to encrypt SYS (sys tem) file or not. Please refer to the figure below. After th[...]

Appendix B USB Flash Drive Function | S c rEdit S oftware User Manual Revision Apr. 30th, 2007, 2007PDD23000002 B-7 After Copy Times is set, the user needs to enter password which is set in ScrEdit software ( Options > Configuration > Standard > Security) . After entering the password, HMI will st art to encrypt the screen data.[...]

Appendix B USB Flash Drive Function | S crEdit Software User Manual B-8 Revision Apr. 30th, 2007, 200 7PDD23000002 After screen data encryption is completed, the user can touch to copy the data. If the password is incorrect, t he following warning dialog box will di splay to remind the user and the screen data cannot be encrypted.[...]

Appendix B USB Flash Drive Function | S c rEdit S oftware User Manual Revision Apr. 30th, 2007, 2007PDD23000002 B-9 Upgrade Firm ware: The user can press this ico n to upgra de the HMI firmware via USB flash drive immediately and compare the firmware version through the screen directly. Please refer to the following figure.[...]

Appendix B USB Flash Drive Function | S crEdit Software User Manual B-10 Revision Apr. 30th, 2007, 2007PDD23000002 Clear HMI Flash ROM: Pressing this icon can clea r HMI Flash ROM. Entering the passwo rd is needed when using this function. Copy screen data from a USB fla sh drive to HMI: Pressing this icon can copy the screen data from a USB flash [...]

Appendix B USB Flash Drive Function | S c rEdit S oftware User Manual Revision Apr. 30th, 2007, 2007PDD23000002 B-11 The following warning dialog box will di spla y if the Copy Times exceeds the setting value. No Encryption Mode As shown as the Fig. B.11 on next page, when the us er wants to use No Encryption mode, please do not check the box next [...]

Appendix B USB Flash Drive Function | S crEdit Software User Manual B-12 Revision Apr. 30th, 2007, 2007PDD23000002 Fig. B.11 Fig. B.12[...]

Appendix B USB Flash Drive Function | S c rEdit S oftware User Manual Revision Apr. 30th, 2007, 2007PDD23000002 B-13 Fig. B.13[...]

Appendix B USB Flash Drive Function | S crEdit Software User Manual B-14 Revision Apr. 30th, 2007, 2007PDD23000002 This page int entionally left blank.[...]

Revision Apr. 30th, 2007, 2007PDD23000002 C-1 Appendix C Main Menu Operation of HMI System Pressing SYS (system) key on HMI panel for three seconds can enter into the main menu of HMI system (Fig. C.1). The user can change some settings and ex ecute some function by touching the icons here. Fig. C.1 Main Menu of HMI System Date/Time Settings: The u[...]

Appendix C Main Menu Operation of HMI System | ScrEdit Software User M a nual C-2 Revision Apr. 30th, 2007, 2007PDD23000002 Calibrate Touch Panel: When the position of touch panel does not match the actual operat ion position, the user can use this function to calibrat e the position of touch panel. When entering into Calibrate function, the user c[...]

Appendix C Main Menu Operation of HMI System | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 C-3 When touching Download Port icon on the screen, COM Port Download/ Upload dialog box will display and ask th e user to select the desired COM port. After the user selects the COM port, HM I system will ask if Bypass mode is use[...]

Appendix C Main Menu Operation of HMI System | ScrEdit Software User M a nual C-4 Revision Apr. 30th, 2007, 2007PDD23000002 Bypass Mode: Through Bypass mode, the data transfe rre d by PC can be received by HMI COM ports directly and then be sent by anothe r COM port of HMI. When planning the system, the user can u se th is function to update the pr[...]

Appendix C Main Menu Operation of HMI System | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 C-5[...]

Appendix C Main Menu Operation of HMI System | ScrEdit Software User M a nual C-6 Revision Apr. 30th, 2007, 2007PDD23000002 Screen Parameter Settings: Touching Backlight icon change the screen param eter settings. Please refer to the following table. Contrast Brightness Frequency[...]

Appendix C Main Menu Operation of HMI System | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 C-7 System Parameter Settings: It is used to set system parameter and communication se ttings. System Parameters Buzzer ON/OFF Set if Buzze r works or not. ScreenSaver Time(Min) Set how long it waits before going into screensaver a[...]

Appendix C Main Menu Operation of HMI System | ScrEdit Software User M a nual C-8 Revision Apr. 30th, 2007, 2007PDD23000002 Run HMI: Touching RUN button to run HMI. File Manager: AS Series A Series Screen Data Encr yp tion Upgrade the firmware via USB flash drive Clear HMI Flash ROM Copy screen data from a USB flash drive to HMI Copy screen data to[...]

Appendix C Main Menu Operation of HMI System | ScrEdit Software User M anual Revision Apr. 30th, 2007, 2007PDD23000002 C-9 AE Series For the description of USB Flash Drive Functio n, please refer to Appendix B. Screen Data Encryption Upgrade the firmware via USB flash drive Clear HMI Flash ROM Copy screen data from a USB flash drive to HMI Clear th[...]

Appendix C Main Menu Operation of HMI System | ScrEdit Software User M a nual C-10 Revision Apr. 30th, 2007, 2007PDD23000002 This page int entionally left blank.[...]