Denon AVR-1713 manuale d’uso

A VR-1 713 INTEGRA TED NET W ORK A V RECEIVER Owner ’ s Manual Basic version Adv anced version Infor mation[...]

I n SAFETY PRECAUTIONS CA UTION RISK OF ELECTRIC SHOCK DO NO T OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence [...]

II n NO TES ON USE WARNINGS • Avoid high temperatures. Allow for sufficient heat dispersion when installed in a rack. • Handle the power cord carefully. Hold the plug when unplugging the cord. • Keep the unit free from moisture, water, and dust. • Unplug the power cord when not using the unit for long periods of time. • Do[...]

1 Thank you for purchasing this DENON product. To ensure proper operation, please read this owner’s manual carefully before using the product. After reading them, be sure to keep them for future reference. Getting started Basic version ························································[...]

2 Features With a discrete-circuit configuration, the power amplifier provides identical quality for all 5 channels (120 W x 5ch) The unit is equipped with a power amplifier that reproduces highfidelity sound in sound mode with equal quality and power for all channels, true to the original sound. The power amplifier circuit adopts a discrete-c[...]

3 Cautions on handling • Before turning the power on Check once again that all connections are correct and that there are no problems with the connection cables. • Power is supplied to some of the circuitry even when the unit is set to the standby mode. When going on vacation or leaving home for long periods of time, be sure to unplug the[...]

Basic version 4 F Connections v page5 F Setup v page20 F Playback (Basic operation) v page27 F Selecting a listening mode (Sound Mode) v page64 Basic version Here, we explain the connections and basic operation methods for this unit. Basic version Adv anced version Infor mation Basic version[...]

5 Important information Make connections before using this unit. To create a home theater that can play back higher quality video and audio by fully utilizing the capabilities of this unit and your video devices, connect this unit to each of your video devices with HDMI cables. n HDMI-compatible device If your video device does not support HDMI con[...]

6 Important information Relationship between video signals and monitor output G Flow of video signals H HDMI connector HDMI signal HDMI signal Video signal Video signal Video connector HDMI-compatible TV HDMI-incompatible TV HDMI connector Video connector Video connector HDMI connector HDMI connector Video connector Video device This unit Output In[...]

7 Connecting an HDMI-compatible device You can connect up to seven HDMI-compatible devices (6-inputs/1-output) to the unit. If the device connected to this unit is equipped with an HDMI connector, it is recommended to use HDMI connections. Connections with an HDMI cable offer the following benefits that can not be achieved with other connection me[...]

8 Connecting an HDMI-compatible device n About ARC (Audio Return Channel) function This function plays TV audio on this unit by sending the TV audio signal to this unit via HDMI cable. If a TV without the ARC function is connected via HDMI connections, video signals of the playback device connected to this unit are transmitted to the TV, but this u[...]

9 Connecting an HDMI-compatible device Connecting this unit to a TV via HDMI connections Cables used for connections Audio and video cable (sold separately) HDMI cable (ARC) IN HDMI TV • Video signals are not output if the input video signals do not match the monitor’s resolution. In this case, switch the Blu-ray Disc/DVD player’s resoluti[...]

10 Connecting an HDMI-compatible device OUT HDMI G Front panel H Digital camcorder • When this unit is connected to other devices with HDMI cables, connect this unit and TV also with an HDMI cable. • When connecting a device that supports Deep Color, please use a “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”. ?[...]

11 Connecting an HDMI-compatible device n Deep Color ( v page120 ) When a device supporting Deep Color is connected, use a cable compatible with “High Speed HDMI cable” or “High Speed HDMI cable with Ethernet”. n Auto Lip Sync ( v page90 , 120 ) n “x.v.Color”, sYCC601 color, Adobe RGB color, Adobe YCC601 color ( v page120 , 121[...]

12 Connecting an HDMI-incompatible device For high quality video and surround playback, it is recommended to use an HDMI cable to connect this unit to TV and other video devices ( v page7 “Connecting an HDMI-compatible device”). This section describes connections when your device does not support HDMI connections. Connection methods for vari[...]

13 Connecting a TV • This section describes how to connect when your TV does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ). • If the TV connected to this unit is equipped with an HDMI connector that supports ARC, digital audio signals from TV can be transm[...]

14 a a a s R L R L VIDEO AUDIO AUDIO R L OUT OUT VIDEO OUT COAXIAL OPTICAL OUT Satellite tuner/Cable TV or or Connecting a set-top box (Satellite tuner/cable TV) This section describes how to connect when your satellite tuner or cable TV does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible de[...]

15 Connecting an HDMI-incompatible device Connecting a DVD player This section describes how to connect when your DVD player does not support HDMI connections. For instructions on HDMI connections, see “Connecting an HDMI-compatible device” ( v page7 ). n Audio connection The following methods are available for connecting to this unit. Use e[...]

16 Connecting an iPod or USB memory device to the iPod/USB port • You can enjoy music stored on an iPod or USB memory device. • For operating instructions see “Playing an iPod” ( v page 29 ) or “Playing a USB memory device” ( v page32 ). Cables used for connections To connect an iPod to this unit, use the USB cable supplied [...]

17 Connecting an FM antenna • Connect the FM antenna supplied with the unit to enjoy listening to radio broadcasts. • After connecting the antenna and receiving a broadcast signal ( v page 35 “Listening to FM broadcasts”), fix the antenna with tape in a position where the noise level becomes minimal. NOTE • Do not connect two[...]

18 Connecting to a home network (LAN) You can connect this unit to your home network (LAN) to perform various types of playbacks and operations as follows. Make network connections for this unit by carefully reading information on this page. • Playback of network audio such as the Internet radio and music servers • Playback of music from [...]

19 Connecting the power cord After completing all the connections, insert the power plug into the power outlet. To household power outlet (AC 120 V, 60 Hz) Power cord NOTE • Do not plug in the power cord until all connections have been completed. • Do not bundle power cords together with connection cables. Doing so can result in humming o[...]

20 The acoustic characteristics of the connected speakers and listening room are measured and the optimum settings are made automatically. This is called “Audyssey ® Setup”. To perform measurement, place the setup microphone in multiple locations all around the listening area. For best results, we recommend you measure in six or more positions[...]

21 2 Set up the subwoofer If using a subwoofer capable of the following adjustments, set up the subwoofer as shown below. For details, see your subwoofer’s manual. n When using a subwoofer with a direct mode Set the direct mode to “On” and disable the volume adjustment and crossover frequency setting. n When using a subwoofer without a direct[...]

22 Detection & Measurement (Main) Set up speakers (Audyssey ® Setup) 4 Select “Start” and then press ENTER . The subwoofer volume setting screen is displayed. 5 Select “Next” and then press ENTER . Audyssey Setup MultEQ XT If your subwoofer has a volume control on it, please set it at 50%... Back Next VOLUME MIN MAX NOTE If “Caution![...]

23 Calculation Set up speakers (Audyssey ® Setup) 10 Repeat step 9, measuring positions 3 to 8. When measurement of position 8 is completed, a “Measurements Complete.” message is displayed. Repeat Last Test Audyssey Setup Measurements Complete. Calculation MultEQ XT 11 Select “Calculation” and then press ENTER . Measuring results are analy[...]

24 Set up speakers (Audyssey ® Setup) 13 Select “Store” and then press ENTER . Save the measurement results. Audyssey Setup Now Storing... please wait... MultEQ XT 75% Audyssey Setup Check processing result. To proceed, select “Store”. Speaker Config. Distances Levels Crossovers MultEQ XT Store • Saving the results requires about 10 s[...]

25 Error messages NOTE • An error message is displayed if Audyssey ® Setup could not be completed due to speaker placement, the measurement environment, etc. If an error message is displayed, check the relevant items and perform the necessary measures. Then perform Audyssey ® Setup again. • If the result still differs from the actual co[...]

26 Parameter Check This function enables you to check the measurement results and equalizer characteristics after Audyssey ® Setup. 1 Use ui to select “Parameter Check” and then press ENTER . Audyssey Setup Your AVR can automatically measure the acoustics of your room and the optimize your speakers. Start Parameter Check Parameter Check Speake[...]

27 Playback (Basic operation) Setup ( v page20 ) n Turning the power on ( v page27 ) n Selecting the input source ( v page27 ) n Adjusting the master volume ( v page28 ) n Turning off the sound temporarily ( v page28 ) n Playing a Blu-ray Disc player/DVD player ( v page28 ) n Playing an iPod ( v page29 ) n Playing a USB memory [...]

28 Adjusting the master volume Use VOLUME df to adjust the volume. • The volume display method varies depending on the “Scale” setting ( v page86 ). n When the “Scale” setting ( v page86 ) is “0 – 98” G Adjustable range H 0.0 0.5 – 98.0 n When the “Scale” setting ( v page86 ) is “–79.5dB – 18.0dB” G Adjusta[...]

29 Playing an iPod You can use the USB cable provided with the iPod to connect the iPod with the unit’s iPod/USB port and enjoy music stored on the iPod. For information on the iPod models that can be played back with this unit, see “Connecting an iPod or USB memory device to the iPod/USB port” ( v page16 ). Listening to music on an iPod T[...]

30 Playing an iPod n Setting “Browse Mode” (Operation Mode) In this mode, various lists and screens during playback on iPod are displayed on the TV screen. This section describes the steps up to playing back tracks on iPod in “Browse Mode”. 1 Press iPod/USB to switch the input source to “iPod/ USB”. 2 Press OPTION . The option menu scre[...]

31 Playing an iPod n Performing repeat playback (Repeat) 1 Press OPTION while in Browse Mode. The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER . OPTION iPod Title Now Playing Artist Album 00:06 100% Previous Option Pause Next Back Option Repeat Random Operation Mode 3 Use o p to select repeat playback mode. OPT[...]

32 Playing a USB memory device Playing back music or still picture (JPEG) files recorded on a USB memory device. Important information • Only USB memory devices conforming to mass storage class and MTP (Media Transfer Protocol) standards can be played on this unit. • This unit is compatible with USB memory devices in “FAT16” or “FA[...]

33 Playing files stored on USB memory devices 1 Connect the USB memory device to the iPod/USB port ( v page 16 ). 2 Press iPod/USB to switch the input source to “iPod/USB”. D&M1 D&M2 D&M3 Music1 Music2 Music3 Music4 OPTION USB [1/9] Option 3 Use ui to select the search item or folder, then press ENTER or p . 4 Use ui to select the [...]

34 Playing a USB memory device n USB memory device operation buttons Operation buttons Function PAGE df Page search INFO Display of information such as the source name, volume, and sound mode name OPTION Text Search / Repeat playback / Random playback / Picture View / Slideshow uio p Cursor operation / Auto search (cue, ui ) ENTER (Press and releas[...]

35 Listening to FM broadcasts For antenna connections, see “Connecting an FM antenna” ( v page17 ). How to tune in The modes for receiving FM broadcasts consists of “Auto” mode that automatically searches available broadcast stations and “Manual” mode that lets you tune in using buttons to change the frequency. The default setting is[...]

36 Listening to FM broadcasts n Changing the tuning mode (Tune Mode) You can change the mode for tuning into FM broadcasts. If you cannot tune in automatically with “Auto” mode, then change the mode to “Manual” and tune in manually. 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The option menu screen is displayed. 3 Us[...]

37 Listening to FM broadcasts n Tuning in by entering the radio frequency (Direct Tune) You can enter the receiving frequency directly to tune in. 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Direct Tune”, then press ENTER . The direct tuner screen is displayed and [...]

38 Listening to FM broadcasts Presetting broadcast stations n Tuning in to radio stations and presetting them automatically (Auto Preset) Up to 56 stations can be preset. If “Auto Preset” is performed after performing “Preset Memory”, the “Preset Memory” settings will be overwritten. 1 Press FM to switch the input source to “FM”. 2 [...]

39 n Presetting the current broadcast station (Preset Memory) Your favorite broadcast stations can be preset so that you can tune them in easily. Up to 56 stations can be preset. 1 Tune in the broadcast station you want to preset. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Preset Memory”, then press ENTER . The li[...]

40 n Specify a name for the preset broadcast station (Preset Name) You can set the name to the preset broadcast station or change it. Up to eight characters can be input. 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The option menu screen is displayed. 3 Use ui to select “Preset Name”, then press ENTER . The Preset Name s[...]

41 n Skipping preset broadcast stations (Preset Skip) You can set in advance, the stations you do not want to be displayed when tuning in, by groups or by stations. The preset skip setting is useful when tuning in, because only your favorite stations are displayed. 1 Press FM to switch the input source to “FM”. 2 Press OPTION . The option menu [...]

42 Cancelling preset skip 1 While the Preset Skip screen is displayed, use o p to select a group containing a broadcast station to cancel the skip for. 2 Use ui to select a broadcast station to cancel the skip for. G TV Screen H CH 3 FM 98.10 MHz CH 2 FM 89.10 MHz CH 1 FM 87.50 MHz Preset Group Set No. 1-8 to skip CH 6 FM 90.10 MHz CH 5 FM 90.10 MH[...]

43 Listening to internet radio Internet radio refers to radio broadcasts distributed over the Internet. Internet radio stations from around the world can be received. Important information The broad cast station types and specifications supported by this unit for playback are as follows. G Playable broadcast station types H Supported file types I[...]

44 Listening to internet radio n Adjusting the sound quality (Restorer) Make this setting at “Restorer” ( v page86 ) in the menu. You can use the “Restorer” function to restore to a state close to the audio before compression while correcting the bass feel to enjoy a richer playback experience. The default setting is “Mode3 (Low)”. n[...]

45 Listening to internet radio n Using vTuner to add Internet radio stations to favorites There are many Internet radio stations in the world, and this unit can tune into these stations. But finding the radio station you want to hear may be difficult, because there are too many stations. If this is the case, then please use vTuner, an Internet ra[...]

46 Playing back files stored on a PC and NAS This unit can play back music files and playlists (m3u, wpl) stored on a PC and on Network Attached Storage (NAS) that supports DLNA. Important information • The network audio playback function of this unit connects to the server using technologies shown below. • Windows Media Player Network [...]

47 Playing back files stored on a PC and NAS Applying media sharing settings Here, we apply the settings to share music files stored on a PC and NAS on the network. n Sharing media stored in PC If you are using a media server, be sure to apply this setting first. When using Windows Media Player 12 (Windows 7) NOTE Perform this procedure after ch[...]

48 Playing back files stored on a PC and NAS Playing back files stored on a PC and NAS Use this procedure to play music files, image files or playlists. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 18 “Connecting to a home network (LAN)”). w If settings are required, make the “Setti[...]

49 Playing back files stored on a PC and NAS Operations available through the OPTION button Press the OPTION button to display a menu of functions that can be used on the TV screen. Select the function you want to use from this menu. You can easily find and use the desired function. n Searching content with keywords (Text Search) ( v page58 ) [...]

50 Using online services This unit supports playback of the online services shown below. n About Flickr ( v page51 ) Flickr is an online photograph sharing service that started in 2004. You can use the this unit to view photographs that have been made public by Flickr users. You do not need an account to use Flickr. To view photographs that you [...]

51 Using online services Viewing photographs on the Flickr site You can view photographs shared by particular users, or all of the photographs shared on Flickr. n Viewing photographs shared by particular users 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 18 “Connecting to a home network (LA[...]

52 Using online services n Viewing all photographs on Flickr 1 Use ui to select “All Content”, then press ENTER or p . OPTION Flickr [1/2] Add Flickr Contact All Content Option 2 Use ui to select the folder, and then press ENTER or p . Interestingness Displays photographs that are popular from the number of user comments or number of times they[...]

53 Using online services Listening to Pandora ® 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 18 “Connecting to a home network (LAN)”). w If settings are required, make the “Settings” ( v page102 ). e Complete step 4 and obtain a Pandora account. • If you already have a Pandor[...]

54 Using online services n Creating a new station You can create up to 100 radio stations. 1 Use ui to select “New Station”, then press ENTER or p . BACK My Station [1/3] Sign out Exit New Station Quick Mix D&M1 Radio 2 Input a track or artist name, then press O K . BACK New Station Input Select Cancel Track or Artist A N 0 $ B O 1 % C P 2 [...]

55 Using online services n Giving Feedback and Managing Stations You can personalize your stations by providing feedback. Press p while a track is playing. The Pandora menu screen is displayed. Menu [1/8] I like this track I don’t like this track Why is this track playing? Create station Bookmark this artist Bookmark this track I’m tired of thi[...]

56 Using online services Listening to SiriusXM Satellite Radio Over 120 channels of the SiriusXM programming you love, including commercial-free music plus sports, talk, news and entertainment. Listen anywhere on your computer or smartphone. 1 Prepare for playback. q Check the network environment, then turn on this unit’s power ( v page 18 “[...]

57 Using online services n Sign out Disassociate this unit from your SiriusXM account. 1 While the SiriusXM top menu is displayed, press BACK . 2 When the popup menu appears, use o p to select “Yes”, then press ENTER . BACK SiriusXM [1/20] Pop Rock Dance/Electronic Hip-Hop/R&B Country Chirisitan Jazz/Standards Sign Out Exit Are you sure you[...]

58 Convenient functions Here, we explain how to use convenient functions for NETWORK sources and USB sources. The source names under the titles of each function’s description are sources that allow use of these functions. n Searching content with keywords (Text Search) ( v page58 ) n Performing repeat playback (Repeat) ( v page59 ) n Perfor[...]

59 Convenient functions Performing repeat playback (Repeat) USB Media Server 1 While content is playing, press OPTION . The option menu screen is displayed. 2 Use ui to select “Repeat”, then press ENTER . OPTION USB Title Now Playing Artist Album 00:06 100% Previous Option Pause Next Back MP3 128kbps Repeat Option Random Picture View 3 Use o p [...]

60 Convenient functions Favorites function There are two ways to add content to favorites: q Add to favorites from the Option menu w Add to the FAVORITE STATION button n Add to favorites from the Option menu (Favorites Memory) Internet Radio Media Server You can add up to 100 items as favorites for all sources (Internet Radio and Media Server). 1 W[...]

61 Convenient functions n Deleting content added to favorites (Remove Favorites) 1 Press NETWORK . 2 Use uio p to select “Favorites”, then press ENTER . Favorites Internet Radio Media Server Network 3 Use ui to select the content you want to delete from favorites, then press OPTION . The option menu screen is displayed. 4 Use ui to select “Re[...]

62 AirPlay function Enjoy music from your iTunes library with high quality sound anywhere in your home. Use the Apple Remote app z for iPhone, iPod touch and iPad to control iTunes from any room in your home. z Available as a free download from the App Store. n Streaming music stored in iPhone, iPod touch, or iPad directly to the unit If you update[...]

63 n Perform iTunes playback operations with the remote control unit of this unit With this unit’s remote control unit, you can perform iTunes song play, pause, and auto search (cue) operations. 1 Select “Edit” – “Preferences...” on the menu. 2 Select “Devices” in the iTunes setting window. 3 Check “Allow iTunes control from remot[...]

64 Selecting a listening mode (Sound Mode) This unit allows you to enjoy various kinds of surround and stereo playbacks. Multi-channel audio formats are adopted by many of the contents including Blu-ray disc and DVD as well as digital broadcasting and Internet-delivered movies and music. This unit supports playback of almost all of these multi-chan[...]

65 Selecting a listening mode n Listening mode • The following listening modes can be selected using the MOVIE , MUSIC , GAME , and PURE buttons. • Adjust the sound field effect with the menu “Surr.Parameter” ( v page84 ) to enjoy your favorite sound mode. Operation button Input signal Listening mode MOVIE 2-channel z 1 STEREO DOL[...]

66 Selecting a listening mode z 1 2-channel also includes analog input. z 2 This mode plays back 2-channel source in 5.1-channel playback. It cannot be selected when headphones are used, or when only front speakers are used. z 3 Some listening modes cannot be selected, depending on the audio format or number of channels of the input signal. For det[...]

67 Selecting a listening mode n Description of listening mode types Dolby listening mode Listening mode type Description DOLBY PL g This mode can be selected when a Dolby Pro Logic g decoder is used to play back 2-channel source in 5.1-channel surround sound with a natural, realistic feel. DOLBY Pro Logic This mode can be selected when a Dolby Pro [...]

Advanced version 68 F Installation/connection of speakers (Advanced) v page69 F Playback (Advanced operation) v page73 F Playback in ZONE2 (Separate room) v page78 F How to make detailed settings v page79 Advanced version Here, we explain functions and operations that let you make better use of this unit. Basic version Adv anced version[...]

69 Procedure for speaker settings Speaker installation Speaker connection ( v page70 ) Speaker installation • Determine the speaker system depending on the number of speakers you are using and install each speaker and subwoofer in the room. Here, we explain how to install the speakers using a typical example. • The speaker impedance sh[...]

70 Speaker connection Here, we connect the speakers in the room to this unit. This section explains how to connect them using a typical example. n Connecting 5.1-channel speakers ( v page71 ) n Connecting 2.1-channel speakers ( v page72 ) NOTE • Disconnect this unit’s power plug from the power outlet before connecting the speakers. Als[...]

71 Speaker connection Connecting 5.1-channel speakers Cables used for connections Audio cable (sold separately) Speaker cable Subwoofer cable NOTE • For speaker cable connections, see page70 . • For speaker impedance , see page70 . SL SR FL FR C SW Basic version Adv anced version Infor mation Adv anced version[...]

72 FL FR SW Connecting 2.1-channel speakers Cables used for connections Audio cable (sold separately) Speaker cable Subwoofer cable NOTE • For speaker cable connections, see page70 . • For speaker impedance , see page70 . Speaker connection Basic version Adv anced version Infor mation Adv anced version[...]

73 Setup ( v page20 ) Playback (Basic operation) ( v page27 ) Selecting a listening mode (Sound Mode) ( v page64 ) n HDMI control function ( v page73 ) n Sleep timer function ( v page74 ) n Quick select function ( v page75 ) n Web control function ( v page76 ) n Various memory functions ( v page77 ) Playback (Advanced operat[...]

74 HDMI control function NOTE • When “HDMI Control” is set to “On”, it consumes more standby power. • The HDMI control function controls operations of a TV that is compatible with the HDMI control function. Make sure that the TV and HDMI are connected when you perform HDMI control. • Some functions may not operate depending o[...]

75 Quick select function You can save settings such as the input source selection, volume level, and sound mode at the QUICK SELECT 1 – 4 buttons. You can simply press one of the set QUICK SELECT buttons for subsequent playback to switch to various saved settings all at once. • By saving frequently used settings at the QUICK SELECT 1 – 4 b[...]

76 Web control function You can control this unit from a web control screen on a web browser. • This unit and the PC need to be connected to the network properly ( v page 18 “Connecting to a home network (LAN)”) in order to use the web control function. • Depending on the settings of your security-related software, you may not be a[...]

77 Web control function G Example 2 H Setup menu screen VIDEO AUDIO HDMI SETUP VOLUME DISPLA Y VIDEO INPUTS SPEAKERS NETWORK USER ACCOUNT GENERAL INFORMATION FIRMWARE SAVE LOAD Auto Lip Sync ON ***** ***** OFF AUDIO DISPLA Y Audio 30sec 10sec OFF Always HDMI Audio Out Amp TV Bottom Top OFF INFO DISPLA Y ON OFF TV FORMA T NTSC PAL HDMI Control ON OF[...]

78 Playback in ZONE2 (Separate room) • You can operate this unit so as to enjoy audio in a room (ZONE2) other than the MAIN ZONE (room where the unit is located). • You can simultaneously play back the same source in both the MAIN ZONE and ZONE2. You can also play back separate sources in the MAIN ZONE and ZONE2. Audio output Zone playbac[...]

79 Menu map For menu operation, connect a TV to this unit and display the menu on the TV screen. For menu operations, see the following page. By default, this unit has recommended settings defined. You can customize this unit based on your existing system and your preferences. How to make detailed settings Setting items Detailed items Description [...]

80 Examples of menu screen displays Typical examples are described below. G Example 1 H Menu selection screen (Top menu) Surr. Parameter Audio Tone Dialogue Level Subwoofer Level Restorer Audio Delay Volume Audyssey Manual EQ q List of GUI menu setup icons w Currently selected setup item e List of GUI menu setup items Press ui to select “Audio”[...]

81 Examples of menu and front display Below we describe typical examples of displays on the TV screen and on the set’s display window. Menu display Front display Description Top menu display Setup Menu Audio Video Inputs Speakers Network General Setup Assistant w w Audio q Press SETUP to display the menu screen. w TV screen: Displays the selected[...]

82 Inputting characters On this unit, you can change the name displayed on the following screens to the names that you prefer. • Text Search ( v page58 ) • Preset Name ( v page40 ) • Source Rename ( v page94 ) • Friendly Name ( v page101 ) • Quick Sel.Names ( v page105 ) • Character input for the network[...]

83 Audio Make audio-related settings. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Menu, press SETUP while the menu is displayed. The menu display disappear[...]

84 Setting items Setting details Center Image Distributes the dialogue output from the center channel to the front left and right channels and widens the sound image in the front. You can set this when the sound mode is set to DTS NEO:6 in the “Music” mode. 0.0 – 1.0 (0.3) The smaller the value, the more dialogue is concentrated on the center[...]

85 Tone Default settings are underlined. Adjust the tonal quality of the sound. Setting items Setting details Tone Control Set the tone control function to “On” and “Off”. On : Allow tone adjustment (bass, treble). Off : Playback without tone adjustment. “Tone Control” can be set when “Dynamic EQ ® ” ( v page 87 ) is set to “O[...]

86 Audio Delay Default settings are underlined. While viewing video, manually adjust the time to delay audio output. Setting details 0ms – 200ms • This item can be set within the range of 0 to 100 ms when “Auto Lip Sync” ( v page 90 ) is set to “On” and when a TV compatible with Auto Lip Sync is connected. • Store “Audio De[...]

87 Audio Audyssey Default settings are underlined. Set Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® . These can be selected after Audyssey ® Setup has been performed. For additional information on Audyssey technology, please see page120 . NOTE • If you have not performed Auto Setup, or if you change the spea[...]

88 Audio Manual EQ Default settings are underlined. Use the graphic equalizer to adjust the tone of each speaker. “Manual EQ” can be set when “MultEQ ® XT” setting ( v page87 ) is “Manual EQ”. Setting items Setting details Speaker Select Select whether to adjust tones for individual speakers or for all speakers. All : Adjust the ton[...]

89 Video Make video-related settings. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Menu, press SETUP while the menu is displayed. The menu display disappear[...]

90 Video HDMI Setup Default settings are underlined. Make settings for HDMI video/audio output. Setting items Setting details Auto Lip Sync Make automatic compensation for timing shift in audio and video output. On : Compensated. Off : Not compensated. HDMI Audio Out Select HDMI audio output device. AVR : Play back through speakers connected to the[...]

91 Video Info.Display Default settings are underlined. Displays status of operation temporarily when the sound mode is changed or input source is switched. You can set whether or not to show each of these status displays. Setting items Setting details On-Screen Info On : Turn display on. Off : Turn display off. Audio Display Default settings are un[...]

92 Inputs Perform settings related to input source playback. • You do not have to change the settings to use the unit. Make settings when needed. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the previous ite[...]

93 Setting items Setting details DIGITAL Set this to change the digital input connectors assigned to the input sources. CBL/SAT DVD Blu-ray GAME MEDIA PLAYER AUX TV AUDIO COAXIAL / OPTICAL : Assign a digital input connector to the selected input source. None : Do not assign a digital input connector to the selected input source. • At time of p[...]

94 Source Rename Change the display name of the selected input source. This is convenient when the input source name of your device and the input source name of this unit are different. You can change the name to suit your needs. When the renaming is completed, the name is displayed on this unit’s display and on the menu screen. Setting details C[...]

95 Inputs Setting items Setting details Decode Mode Set the audio decode mode for input source. CBL/SAT DVD Blu-ray GAME MEDIA PLAYER AUX TV AUDIO Auto : Detect type of digital input signal and decode and play automatically. PCM : Decode and play only PCM input signals. DTS : Decode and play only DTS input signals. • This item can be set for i[...]

96 Speakers Set when changing Audyssey ® Setup settings. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to set Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page87 ). • Can be used without changing the settings. Please set if necessary. Menu operation[...]

97 Manual Setup Default settings are underlined. Perform when setting the speakers manually or when changing settings made in Audyssey ® Setup. • If you change the speaker settings after performing Audyssey ® Setup, it will not be possible to select Audyssey MultEQ ® XT, Audyssey Dynamic EQ ® and Audyssey Dynamic Volume ® ( v page87 ).[...]

98 Setting items Setting details Levels Set the volume of the test tone to be the same when it is output from each speaker. Test Tone Start : Output test tone. • Front L / Center / Front R / Surround R / Surround L / Subwoofer : Select speaker to output test tone. • –12.0dB – +12.0dB (0.0dB) : Adjust the volume. When “Levels” is a[...]

99 Speakers Setting items Setting details Crossovers Set the maximum frequency of the bass signal output from each channel to the subwoofer. Set the Crossover Frequency to suit the bass reproduction capability of the speaker being used. Crossover : Set the crossover frequency. • 40Hz / 60Hz / 80Hz / 90Hz / 100Hz / 110Hz / 120Hz / 150Hz / 200Hz[...]

10 0 Network To use this unit by connecting it to a home network (LAN), you must configure network settings. If you set up your home network (LAN) via DHCP, set “DHCP” to “On” (use the default setting). This allows this unit to use your home network (LAN). If you assign an IP address for each device, you must use the “IP Address” setti[...]

101 Information Display network information. Setting details Friendly Name / DHCP=On or Off / IP Address / MAC Address MAC Address is required to make a vTuner account. IP Control Default settings are underlined. Set the network function on/off during standby. Setting details Always On : Network is on during standby. Main unit operable with a netwo[...]

10 2 Network Settings Default settings are underlined. Make settings for wired LAN. Only set “Settings” when connecting to a network without a DHCP function. Setting details Information Network IP Control Friendly Name Settings q DHCP Settings IP Address Subnet Mask Default Gateway Primary DNS Secondary DNS Off 192 . 168 . 000 . 001 255 . 255 .[...]

10 3 Network Setting details n Proxy settings Make this setting when connecting to the Internet via a proxy server. Make the proxy settings only when you connect to the Internet via a proxy server that is on your internal network or provided by your provider, etc. Information Network IP Control Friendly Name Settings q DHCP Settings IP Address Subn[...]

10 4 General Make various other settings. Menu operation 1 Press SETUP . The menu is displayed on the TV screen. 2 Use ui to select the menu to be set or operated. 3 Press ENTER or p to enter the setting. • To return to the previous item, press o or BACK . • Exiting the Menu, press SETUP while the menu is displayed. The menu display disap[...]

10 5 General Language Default settings are underlined. Set the language for display on the menu screen. Setting details English / Español “Language” can also be set by the following procedure. However, the menu screen is not displayed. Following the display content to make the setting. 1. Press and hold the main unit’s ZONE2 SOURCE and STATU[...]

10 6 Information Show information about receiver settings, input signals, etc. Items Setting details Audio Show information about audio input signals. Sound Mode : The currently set surround mode. Signal : The input signal type. Format : The number of input signal channels (presence of front, surround, LFE). Sample rate : The input signal’s sampl[...]

10 7 Firmware Default settings are underlined. Set whether or not to check for firmware update, update the firmware, and display update and upgrade notifications. Setting items Setting details Update Update the firmware of the receiver. NOTE In cases where it is not possible to connect to the network after doing a firmware update, connect to t[...]

10 8 General Setting items Setting details Add New Feature Display new features that can be downloaded to this unit and perform an upgrade. NOTE In cases where it is not possible to connect to the network after adding a new function, connect to the network again using “Network” ( v page100 ). Upgrade Status : Display a list of the additional[...]

Information 10 9 F Part names and functions v page110 F Other information v page115 F Troubleshooting v page122 F Specifications v page127 F Index v page128 Information Here, we list various information related to this unit. Please refer to this information as needed. Basic version Adv anced version Infor mation Infor mation[...]

11 0 Front panel For buttons not explained here, see the page indicated in parentheses ( ). Q1 Q6 Q2 Q3 Q4 Q5 y r t e q w o i Q0 u q Power operation button ( X ) ··················································· ( 27 ) Turns power to this unit on and off (standby). w Power indicator ······?[...]

111 Display t r y u i o Q0 Q1 q w e q Information display The input source name, sound mode, setting values and other information are displayed here. w Input signal indicators e ZONE2 indicator This lights up when ZONE2 (separate room) power is turned on ( v page78 ). r MUTE indicator This lights when the mute mode is selected ( v page28 ). t[...]

11 2 Rear panel See the page indicated in parentheses ( ). q w t e o i y u i r q FM antenna terminal (ANTENNA) ········································· ( 17 ) w Speaker terminals (SPEAKERS) ······································· ( 71 , 72 ) e Power cord ·······[...]

11 3 Remote control unit For buttons not explained here, see the page indicated in parentheses ( ). ENTER 1 2 3 RC-1168 POWER SLEEP CHANNEL PAGE Blu-ray INTER NET R ADIO FM DVD AUX T V AUDIO NET WORK CB L /SA T GAME iPo d/ USB SOUND MODE PURE MOVIE GAME MUSIC SET UP VOLUME OPTION INFO BACK TUNE FA VORITE STA TION M UTE ZONE 2 SOURCE SELECT ME D IA [...]

11 4 Remote control unit Inserting the batteries q Remove the rear lid in the direction of the arrow and remove it. w Load the two batteries properly as indicated by the marks in the battery compartment. R03/AAA e Put the rear cover back on. NOTE • Insert the specified batteries in the remote control unit. • Replace the batteries with ne[...]

11 5 Other information n Trademark information ( v page115 ) n Surround ( v page116 ) n Relationship between video signals and monitor output ( v page119 ) n Explanation of terms ( v page120 ) Trademark information This product uses the following technologies (Random order): Manufactured under license from Audyssey Laboratories™. U.S.[...]

11 6 Surround This unit is equipped with a digital signal processing circuit that lets you play program sources in the sound mode to achieve the same sense of presence as in a movie theater. Sound modes and surround parameters This table shows the speakers that can be used in each sound mode and the surround parameters adjustable in each sound mode[...]

11 7 Surround Sound Mode ( v page64 ) Surr.Parameter ( v page84 ) Tone z 8 ( v page85 ) Audyssey z 9 ( v page87 ) Restorer z 11 ( v page86 ) PRO LOGIC g Music mode only NEO:6 Music mode only Panorama ( v page84 ) Dimension ( v page84 ) Center Width ( v page84 ) Center Image ( v page84 ) MultEQ ® XT ( v page87 ) Dynami[...]

11 8 Surround n Types of input signals, and corresponding sound modes This table shows the input signal that can be played in each sound mode. Check the audio signal of the input source then select the sound mode. Symbols in the table F This indicates the default sound mode. S This indicates the selectable sound mode. Sound Mode ( v page64 ) NOT[...]

11 9 Relationship between video signals and monitor output Output Input HDMI output Video output HDMI VIDEO Video Menu Video Menu A A A Only the menu is displayed A A A S S <VIDEO> S A S <HDMI> S (HDMI) A S S S <VIDEO> S : Video signal input present A : No video signal input S < > : The input signal between the < > mar[...]

12 0 Explanation of terms A Adobe RGB color, Adobe YCC601 color The color space defined by Adobe Systems Inc. Because it is a wider color space than RGB, it can produce more vivid and natural images. AirPlay AirPlay sends (plays) contents recorded in iTunes or on an iPhone/iPod touch/iPad to a compatible device via the network. App Store App Store[...]

12 1 F FLAC FLAC stands for Free lossless Audio Codec, and is a lossless free audio file format. Lossless means that the audio is compressed without any loss in quality. The FLAC license is as shown below. Copyright (C) 2000,2001,2002,2003,2004,2005,200 6,2007,2008,2009 Josh Coalson Redistribution and use in source and binary forms, with or withou[...]

12 2 Troubleshooting If a problem should arise, first check the following: 1. Are the connections correct? 2. Is the set being operated as described in the owner’s manual? 3. Are the other devices operating properly? If this unit does not operate properly, check the items listed in the table below. Should the problem persist, there may be a malf[...]

12 3 G Audio H Symptom Cause/Solution Page Audio is not output. • Check the connections for all devices. • Check the speaker connections and configurations. • Check whether the audio device power is turned on. • Adjust the master volume. • Cancel the mute mode. • Check the connection with the playback device and selec[...]

12 4 G iPod / USB memory device / Internet radio / Media server / Flickr / Pandora / SiriusXM H Symptom Cause/Solution Page iPod cannot be played. • Some iPods do not support being used connected directly to the iPod/USB port. 16 The file names are not displayed properly (“...”, etc.). • Characters that cannot be displayed are used. [...]

12 5 Symptom Cause/Solution Page Sound quality is poor or noise is heard during play. • File being played has a low bit rate. This is not a malfunction. – Cannot login to Pandora. (“Email address” or “Password” is displayed.) • Login information is incorrect. Check if the “Email address” for Pandora has been properly entered[...]

12 6 Resetting the microprocessor Perform this procedure if the display is abnormal or if operations cannot be performed. When the microprocessor is reset, all the settings are reset to their default values. X SOURCE SELECT 1 SOURCE SELECT 0 1 Turn off the power using X . 2 Press X while simultaneously pressing SOURCE SELECT 0 and SOURCE SELECT 1 .[...]

12 7 Specifications n Audio section • Power amplifier Rated output: Front: 80 W + 80 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 120 W + 120 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Center: 80 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 120 W (6 Ω, 1 kHz with 0.7 % T.H.D.) Surround: 80 W + 80 W (8 Ω, 20 Hz – 20 kHz with 0.08 % T.H.D.) 120 W[...]

12 8 v Numerics 2.1-channel ························································· 72 3D ······································································· 11 5.1-channel ·····················?[...]

12 9 Preset Memory ·················································· 39 Preset Name ······················································ 40 Preset Skip ·············································?[...]

13 0 Dimensions Unit : in. (mm) 11 23/64 (288.5) 12 61/64 (329.0) 7 51/64 (198.0) 1 23/32 (43.5) 1 27/32 (47.0) 19/32 (15.0) 5 23/64 (136.0) 5 15/16 (151.0) 17 3/32 (434.0) 13 35/64 (344.0) 2 23/64 (60.0) 1 49/64 (45.0) 1 49/64 (45.0) 47/64 (18.5) 55/64 (22.0) Weight : 18 lbs 5 oz (8.3 kg) Basic version Adv anced version Infor mation Infor mation[...]

D&M Holdings Inc. 3520 10065 00AD V00 www.denon.com[...]