Denon AVR-5700 manuale d’uso

A V SURROUND RECEIVER A VR-5700 OPERA TING INSTRUCTIONS DSP SIMULATION MASTER VOLUME REMOTE SENSOR ON / STANDBY ON / STANDBY OFF INPUT SELECTOR TAPE-2 MON HOME THX CINEMA VOLUME LEVEL TUNER DVD VDP TV / DBS VCR-1 VCR-2 V. AUX MD / TAPE-1 TAPE-2 MON PHONO SURROUND SPEAKER CD B A L C R SL S SR CH INDICATOR LOCK LFE PHONES BASS TREBLE DIRECT INPUT MOD[...]

2 2 SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of [...]

3 SAFETY INSTRUCTIONS 1 . Read Instructions – All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions – The safety and operating instructions should be retained for future reference. 3. Heed Warnings – All warnings on the appliance and in the operating instructions should be adhered to[...]

4 2 INTRODUCTION Thank you for choosing the DENON AVR-5700 Digital Surround A / V receiver. This remarkable component has been engineered to provide superb surround sound listening with home theater sources such as DVD, as well as providing outstanding high fidelity reproduction of your favorite music sources. As this product is provided with an im[...]

5 3 CAUTIONS ON HANDLING • Switching the input function when input jacks are not connected A clicking noise may be produced if the input function is switched when nothing is connected to the input jacks. If this happens, either turn down the MASTER VOLUME control or connect components to the input jacks. • Muting of PRE OUT jacks and SPEAKER te[...]

6 5 CONNECTIONS • Do not plug in the AC cord until all connections have been completed. • Be sure to connect the left and right channels properly (left with left, right with right). • Insert the plugs securely. Incomplete connections will result in the generation of noise. • Use the AC OUTLETS for audio equipment only. Do not use them for h[...]

7 OUT OUT OUT OUT PREOUT PHONO FRONT CENTER EFECT SURROUND SIGNAL GND CD DVD VDP TV / DBS V.AUX VCR - 1 VCR - 2 MD / T APE-1 T APE-2 MONITOR SOURCE MULTI OUT-1 MONITOR OUT-2 DVD VDP TV / DBS V.AUX VCR - 1 VCR - 2 VCR - 1 VCR - 2 VCR - 1 VCR - 2 MD / T APE-1 T APE-2 6CH EXT. IN FR SW SR ER FL C SL EL 8CH EXT. IN AUDIO VIDEO S-VIDEO DIGITAL SUB WOOFE[...]

8 OUT OUT OUT PREOUT PHONO FRONT CENTER EFECT SURROUND SIGNAL GND CD DVD VDP TV / DBS V.AUX VCR - 1 VCR - 2 MD / T APE-1 T APE-2 MONITOR SOURCE MULTI OUT-1 MONITOR OUT-2 DVD VDP TV / DBS V.AUX VCR - 1 VCR - 2 VCR - 1 VCR - 2 VCR - 1 VCR - 2 MD / T APE-1 T APE-2 6CH EXT. IN FR SW SR ER FL C SL EL 8CH EXT. IN AUDIO VIDEO S-VIDEO SUB WOOFER R L R L R [...]

9 OUT OUT OUT PREOUT PHONO FRONT CENTER EFECT SURROUND SIGNAL GND CD DVD VDP TV / DBS V.AUX VCR - 1 VCR - 2 MD / T APE-1 T APE-2 MONITOR SOURCE MULTI OUT-1 MONITOR OUT-2 DVD VDP TV / DBS V.AUX VCR - 1 VCR - 2 VCR - 1 VCR - 2 VCR - 1 VCR - 2 MD / T APE-1 T APE-2 6CH EXT. IN FR SW SR ER FL C SL EL 8CH EXT. IN AUDIO VIDEO S-VIDEO SUB WOOFER R L R L R [...]

10 Connecting a Video Component Equipped with Color Difference (Component - Y , R-Y , B-Y) Video Jacks (DVD Player) • When making connections, also refer to the operating instructions of the other components. • The signals input to the color difference (component) video jacks are not output from the VIDEO output jack (yellow) or the S- Video ou[...]

11 OUT OUT OUT OUT PREOUT PHONO FRONT CENTER EFECT SURROUND SIGNAL GND CD DVD VDP TV / DBS V.AUX VCR - 1 VCR - 2 MD / T APE-1 T APE-2 MONITOR SOURCE MULTI OUT-1 MONITOR OUT-2 DVD VDP TV / DBS V.AUX VCR - 1 VCR - 2 VCR - 1 VCR - 2 VCR - 1 VCR - 2 MD / T APE-1 T APE-2 6CH EXT. IN FR SW SR ER FL C SL EL 8CH EXT. IN AUDIO VIDEO S-VIDEO DIGITAL SUB WOOF[...]

12 Speaker system connections • Connect the speaker terminals with the speakers making sure that like polarities are matched ( < with < , > with > ). Mismatching of polarities will result in weak central sound, unclear orientation of the various instruments, and the sense of direction of the stereo being impaired. • When making conn[...]

13 Protector circuit • This unit is equipped with a high-speed protection circuit. The purpose of this circuit is to protect the speakers under circumstances such as when the output of the power amplifier is inadvertently short-circuited and a large current flows, when the temperature surrounding the unit becomes unusually high, or when the unit [...]

14 6 P AR T NAMES AND FUNCTIONS Front Panel • For details on the functions of these parts, refer to the pages given in parentheses ( ). DSP SIMULATION MASTER VOLUME REMOTE SENSOR ON / STANDBY ON / STANDBY OFF INPUT SELECTOR TAPE-2 MON HOME THX CINEMA VOLUME LEVEL PHONES BASS TREBLE DIRECT INPUT MODE STEREO ANALOG DOLBY / DTS SURROUND WIDE SCREEN [...]

15 Remote control unit • For details on the functions of these parts, refer to the pages given in parentheses ( ). DVD START LEARNED/TX HOME THX CINEMA TUNING BAND TITLE MENU/GUIDE MODE MEMORY USE/LEARN T.TONE MULTI DVD SET UP RETURN PANEL DISPLAY ON SCREEN DOLBY / DTS SURROUND DIRECT DSP SIMULATION 5CH STEREO STEREO INPUT MODE ANALOG EXT.IN MUTI[...]

16 7 SETTING UP THE SYSTEM • Once all connections with other AV components have been completed as described in “CONNECTIONS” (see pages 6 to 13), make the various settings described below on the monitor screen using the AVR-5700’s on-screen display function. These settings are required to set up the listening room’s AV system centered aro[...]

17 • Speaker system layout Basic system layout • The following is an example of the basic layout for a system consisting of six speaker systems and a television monitor: Subwoofer Center speaker system Front speaker systems Set these at the sides of the TV or screen with their front surfaces as flush with the front of the screen as possible. Su[...]

18 Before setting up the system Check that all the connections are correct, then turn on the main unit’s power. 1 2 Display the System Setup Menu. TITLE SYSTEM SETUP Setting the type of speakers • The composition of the signals output from the different channels and the frequency response are adjusted automatically according to the combination [...]

19 4 Enter the setting. a) If no surround speakers are used (if “None” is set for both A and B): The System Setup Menu reappears. b) If both surround speakers A and B are used (if either “Large” or “Small” is set for both A and B): The surround speaker setting screen appears. c) If “None” is set for surround speakers A: “None” i[...]

20 2 3 4 Switch to the Bass Output screen. Select the bass signal playback mode. Enter the setting. The System Setup Menu reappears. ENTER ENTER Playback modes Subwoofer Only THX (recommended THX mode) The LFE and the low frequencies (80 Hz or lower) of the channels set to “Small” at the Speaker Configuration screen are output from the subwoofe[...]

21 2 3 Switch to the Delay Time screen. Select the desired unit, meters or feet. Select (darken) the desired units, “Meters” or “Feet”. ENTER Example: When “Feet” is selected Once “Meters” or “Feet” is selected in step 3, the Delay Time screen appears automatically. 4 5 6 Select the speaker to be set. Set the distance between th[...]

22 7 Enter the setting. The System Setup Menu reappears. The AVR-5700 automatically sets the optimum surround delay time for the listening room. ENTER NOTE: • If the distance unit is changed after the delay time is set, the settings are reset to the factory default values (see page 16). Setting the channel level • Use this setting to adjust so [...]

23 6 Select “Test Tone Start”. 7 8 Select “Yes”. a. If the “Auto” mode is selected: Test tones are automatically emitted from the different speakers. The test tones are emitted from the different speakers in the following order, at 4-second intervals the first time and second time around, 2-second intervals the third time around and on:[...]

24 Subwoofer peak limit level setting • This unit features a subwoofer peak limit control which prevents distortion and damage in the loudspeaker system by controlling the maximum bass volume level. With this feature you may set the maximum bass level for the system. • This feature operates with or without a subwoofer in the system. 1 2 3 4 5 6[...]

25 CAUTION! • The master volume is set to “–30 dB” when test tones are output. • The test tones are for confirming the low frequency playback limits and are played at an extremely high level. When using a low output subwoofer, be very careful about irregular operations exceeding clipping by for example turning down the subwoofer’s atten[...]

26 Setting the on-screen display (OSD) • Use this to turn the on-screen display (messages other than the menu screens) on or off. 1 2 3 4 At the System Setup Menu select “On Screen Display”. Switch to the On Screen Display screen. Select “ON” or “OFF”. Enter the setting. The System Setup Menu reappears. ENTER ENTER Auto tuner presets [...]

27 2 3 Press the ENTER button. The “Auto Preset Memory” screen appears. Use the CURSOR button to select “Yes”. “Search” flashes on the screen and searching begins. “Completed” appears once searching is completed. The display automatically switches to screen. ENTER After completing system setup 1 At the System Setup Menu, press the S[...]

28 8 REMOTE CONTROL UNIT • The included remote control unit (RC-853) can be used to operate not only the AVR-5700 but other remote control compatible DENON components as well. Furthermore, it is equipped with a function for learning the control signals of remote control units of other manufacturers, so it can also be used to operate non-DENON rem[...]

29 Operating DENON audio components • Turn on the power of the different components before operating them. 1 2 Set mode switch 1 to “AUDIO (AVR/AVC)”. Set mode switch 2 to the position for the component to be operated. (The tuner can be operated when the switch is at any position but “LOCK”.) 2 When set to LOCK, only the buttons for the b[...]

DENON A 30 Preset memory • DENON and other makes of components can be operated by setting the preset memory for your make of video component. Operation is not possible for some models, however. In this case use the learning function (see page 33) to store the remote control signals. • For instructions on clearing the presettings stored in the p[...]

31 “VCR” “TV” A 1 (DVD) 2 (VDP) 3 (TUNER) 4 (TV/DBS) 5 (V. AUX) 6 (PHONO) 7 (VCR-1) 8 (CD) 9 (MD/TAPE-1) — HITACHI A MITSUBISHI A PANASONIC A JVC (VICTOR) A SONY A PIONEER TOSHIBA A SANYO A SHARP A NEC A — HITACHI B MITSUBISHI B PANASONIC B JVC (VICTOR) B SONY B — TOSHIBA B SANYO B SHARP B NEC B — — MITSUBISHI C PANASONIC C JVC (V[...]

32 3 Operate the video component. • For details, refer to the component’s operating instructions. 2 Some models cannot be operated with this remote control unit. DVD HOME THX CINEMA TUNING BAND TITLE MENU/GUIDE MODE MEMORY USE/LEARN T.TONE MULTI DVD SET UP RETURN PANEL DISPLAY ON SCREEN DOLBY / DTS SURROUND DIRECT DSP SIMULATION 5CH STEREO STER[...]

33 Learning function • If your AV component is not a DENON product or it cannot be operated with the preset memory codesets, you can “teach” the AVR-5700’s remote control to “learn” the codes from the component’s original remote control. • The buttons that can be “learned” are the CD, DECK and MD system buttons (see page 29) and[...]

34 System call function • The included remote control unit is equipped with a system call function for transmitting multiple remote control signals when a single button is pressed (this is often referred to as a “macro” function). This function can be used to turn on the amplifier’s power, select the input source, turn on the monitor TV’s[...]

35 (3) Storing signals (4) Clearing system call settings DVD START LEARNED/TX HOME THX CINEMA TUNING BAND TITLE MENU/GUIDE MODE MEMORY USE/LEARN T.TONE MULTI DVD SET UP RETURN PANEL DISPLAY ON SCREEN DOLBY / DTS SURROUND DIRECT DSP SIMULATION 5CH STEREO STEREO INPUT MODE ANALOG EXT.IN MUTING MASTER VOL. VOLUME DISC SKIP+ SYSTEM CALL POWER VDP TUNER[...]

36 Clearing “learned” remote control signals and resetting the preset memory 1 2 3 Press the USE/LEARN selector button with the tip of a pen, etc., to set the learn mode. To clear “learned” remote control signals, set the slide switch to the position at which the signals were “learned”. To clear the preset memory settings, set the slide[...]

37 Playing the input source 1 Select the input source to be played. INPUT SELECTOR (Main unit) (Remote control unit) 2 When the tape 2 input (TAPE-2 MON) is selected, the input indicator lights. 2 Select the input mode. • Selecting the analog mode Press the ANALOG button to switch to the analog input. Lit ANALOG (Main unit) (Remote control unit) [...]

38 3 4 Start playback on the selected component. • For operating instructions, refer to the component’s manual. 5 Adjust the volume. 2 The volume can be adjusted within the range of –60 to 0 to 18 dB, in steps of 1 dB. However, when the channel level is set as described on page 22 or pages 43 and 44, if the volume for any channel is set at +1[...]

39 After starting playback [1] Adjusting the sound quality (tone) The tone control function will not work in the direct or Home THX Cinema mode. 1 Adjust the bass sound to the desired level using the BASS adjustment control, the treble sound using the TREBLE adjustment control. BASS • To increase the bass or treble: Turn the control clockwise. (T[...]

40 Multi-source recording/playback [1] Playing one source while recording another (REC OUT mode) 1 Press the REC/MULTI MODE button until “REC OUT SOURCE” appears on the set’s display. MODE 2 Press the REC/MULTI SOURCE button until the source you want to record appears on the set’s display. • The indicator for the selected program source l[...]

41 Playback using the external input (EXT . IN) jacks 1 Set the external input (6CH/8CH EXT. IN) mode. Press the 6CH/8CH EXT. IN (on the EXT. IN button on the remote control unit) to switch the external input. 6CH / 8CH EXT. IN (Main unit) (Remote control unit) Once this is selected, the input signals connected to the FL (front left), FR (front rig[...]

42 MULTI ROOM MUSIC ENTERTAINMENT SYSTEM • When the outputs of the MULTI SOURCE AUDIO OUT terminals are wired and connected to integrated amplifiers installed in other rooms, different sources can be played in rooms other than the main room in which this unit and the playback devices are installed. (Refer to ANOTHER ROOM on the diagram below.) ?[...]

43 Before playing with the surround function • Before playing with the surround function, be sure to use the test tones to adjust the playback level from the different speakers. This adjustment can be performed with the system setup (see page 22) or from the remote control unit, as described below. • Adjusting with the remote control unit using[...]

44 Fader function • This function makes it possible to lower the volume of the front channels (FL, C and FR) or the rear channels (SL and SR) together. Use it for example to adjust the balance of the sound from the different positions when playing multi-channel music sources. 1 Select “FADER”. The channel switches in the order shown below eac[...]

45 Dolby Digital mode (only with Dolby Digital RF or digital input) and DTS Surround (only with digital input) 1 Select the input source. Playback with a Dolby Digital RF input 1 Select VDP for the input. INPUT SELECTOR (Main unit) (Remote control unit) 2 Set the input mode to “AUTO” or “RF”. (Main unit) (Remote control unit) Playback with [...]

NOTE: • When “Default” is selected and the cursor button is pressed, “CINEMA EQ.” and “D.COMP.” are automatically turned off, “LFE” is reset, “S.Sp” is set to “A” and the tone is set to the default value. 46 4 Display the surround parameter menu. MENU/GUIDE SURROUND PARAMETER 5 Select the various parameters. 6 Enter the se[...]

47 Home THX Cinema mode [1] Playing sources recorded in Dolby Pro Logic in the Home THX Cinema surround mode 1 Select the Home THX Cinema mode. (Main unit) (Remote control unit) HOME THX CINEMA 2 Play a program source with the mark. • For operating instructions, refer to the manuals of the respective components. 2 1 Select the program source Sele[...]

48 11 DSP SURROUND SIMULA TION • The AVR-5700 is equipped with a high performance DSP (Digital Signal Processor) which uses digital signal processing to synthetically recreate the sound field. One of eight preset surround modes can be selected according to the program source and the parameters can be adjusted according to the conditions in the li[...]

49 DSP surround simulation 1 Select the surround mode for the input channel. DSP SIMULATION DIRECT STEREO DOLBY / DTS SURROUND WIDE SCREEN 5CH STEREO SURROUND MODE (Main unit) (Remote control unit) The surround mode switches in the following order each time the DSP SIMULATION button is pressed: 2 “WIDE SCREEN” can only be selected from the main[...]

50 T one control setting • Use the tone control setting to adjust the bass and treble as desired. 1 Display the surround parameter screen on the monitor. 2 The screen for the selected surround mode appears. “TONE” cannot be selected in the Direct or Home THX Cinema mode. MENU/GUIDE SURROUND PARAMETER 2 Select “TONE”. 3 Switch to the Tone [...]

51 Surround parameters 2 ROOM SIZE: This sets the size of the sound field. There are five settings: “small”, “med.s” (medium-small), “medium”, “med.l” (medium-large) and “large”. “small” recreates a small sound field, “large” a large sound field. EFFECT LEVEL: This sets the strength of the surround effect. The level can [...]

52 12 LISTENING TO THE RADIO Auto tuning 1 1 Set the input function to “TUNER”. INPUT SELECTOR 2 Watching the display, press the BAND button to select the desired band (AM or FM). BAND 3 Press the MODE button to set the auto tuning mode. MODE “Auto” appears on the display. 4 Press the TUNING UP or DOWN button. TUNING Automatic searching beg[...]

53 Preset memory 34 2 Press the MEMORY button. MEMORY 3 Press the SHIFT button and select the desired memory block (A to D). SHIFT 4 Press the PRESET UP or DOWN button to select the desired preset channel (1 to 8). DOWN UP 5 Press the MEMORY button again to store the station in the preset memory. To preset other channels, repeat steps 2 to 5. A tot[...]

1,2 2 54 Recalling preset stations 1 Watching the display, press the SHIFT button to select the preset memory block. 2 Watching the display, press the PRESET UP or DOWN button to select the desired preset channel. 12 13 LAST FUNCTION MEMORY • This unit is equipped with a last function memory which stores the input and output setting conditions as[...]

55 15 TROUBLESHOOTING If a problem should arise,first check the following. 1. Are the connections correct ? 2. Have you operated the receiver according to the Operating Instructions ? 3. Are the speakers, turntable and other components operating property ? If this unit is not operating properly, check the items listed in the table below. Should the[...]

56 16 ADDITIONAL INFORMA TION There are currently various types of multi-channel signals (signals or formats with more than two channels). 2 Types of multi-channel signals Dolby Digital, Dolby Pro Logic, DTS, high definition 3-1 signals (Japan MUSE Hi-Vision audio), DVD-Audio, SACD (Super Audio CD), MPEG multi-channel audio, etc. “Source” here [...]

57 Speaker setting examples Here we describe a number of speaker settings for different purposes. Use these examples as guides to set up your system according to the type of speakers used and the main usage purpose. (1) Basic setting for primarily watching movies Use this setting if your main purpose is to listen to movie music and when using one s[...]

58 Surround The AVR-5700 is equipped with a digital signal processing circuit that lets you play program sources in the surround mode to achieve the same sense of presence as in a movie theater. Dolby Surround (1) Dolby Digital (Dolby Surround AC-3) Dolby Digital is the multi-channel digital signal format developed by Dolby Laboratories. Dolby Digi[...]

59 (2) Dolby Pro Logic Dolby Pro Logic is a multi-channel signal playback system developed by Dolby Laboratories which decodes sources recorded in Dolby Surround into four channels: front left, center, front right and surround (the surround channel is monaural, but is played through two surround speakers). Here, “sources recorded in Dolby Surroun[...]

60 Home THX Cinema is a surround playback technology advocated by Lucasfilm of the United States, a company famous for the sound effects of such movies as Star Wars and Indiana Jones. This technology was born from the desire of movie director George Lucas to create the ultimate theater experience. THX Cinema technology includes both a design and pe[...]

61 System setup items and default values (set upon shipment from the factory) FRONT L/R A A A A A A A A A A A A A A A A A A E E o o o o o o o o o o o o o o o E E o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o o E E A E E E E E E E E E E E E E E E A (0dB) A (0dB) A (0dB) E A (0dB) E A (0dB) E A (0dB) A (0dB) A (note 1) A (note 2) A (0[...]

62 17 SPECIFICA TIONS 2 Audio section • Power amplifier Rated output: Stereo (2ch driven) (All properties shown are only 140 W + 140 W (8 Ω /ohms, 20 Hz ~ 20 kHz with 0.05% T.H.D.) for the power amplifier stage.) 170 W + 170 W (8 Ω /ohms, 1 kHz with 0.7% T.H.D.) Surround 140 W x 5 ch (8 Ω /ohms, 1 kHz with 0.7% T.H.D.) Dynamic power: 190 W [...]

[...]

Printed in Japan. 511 3418 005 901 14-14, AKASAKA 4-CHOME, MINATO-KU, TOKYO 107-8011, JAPAN Telephone: (03) 3584-8111 Cable: NIPPON COLUMBIA TOKYO Telex: JAPANOLA J22591[...]